From eb434f72d1f7deb13d3e5aacf6517897de7f95e4 Mon Sep 17 00:00:00 2001 From: Michael Brandt Date: Wed, 24 Nov 2010 14:22:54 +0100 Subject: U8500: Move prcmu.c into SoC directory prcmu.c is SoC specific, not board specific. Other db8500 based boards need it as well, therefore move it into the SoC directory. Change-Id: Ic40e474700fb737dbbb8ce7ea6c88ea1b89d2f20 Signed-off-by: Michael Brandt Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/9371 Reviewed-by: Joakim AXELSSON Reviewed-by: Markus HELGESSON Reviewed-by: Robert ROSENGREN --- board/st/u8500/prcmu-fw-defs_v1.h | 586 -------------------------------------- 1 file changed, 586 deletions(-) delete mode 100644 board/st/u8500/prcmu-fw-defs_v1.h (limited to 'board/st/u8500/prcmu-fw-defs_v1.h') diff --git a/board/st/u8500/prcmu-fw-defs_v1.h b/board/st/u8500/prcmu-fw-defs_v1.h deleted file mode 100644 index 046f89e21..000000000 --- a/board/st/u8500/prcmu-fw-defs_v1.h +++ /dev/null @@ -1,586 +0,0 @@ -/* - * Copyright (c) 2009 ST-Ericsson SA - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - * - * Copied from the Linux version: - * Author: Kumar Sanghvi - */ - -#ifndef __MACH_PRCMU_FW_DEFS_V1_H -#define __MACH_PRCMU_FW_DEFS_V1_H - -/** - * enum state_t - ON/OFF state definition - * @OFF: State is ON - * @ON: State is OFF - * - */ -enum state_t { - OFF = 0x0, - ON = 0x1, -}; - -/** - * enum ret_state_t - general purpose On/Off/Retention states - * - */ -enum ret_state_t { - OFFST = 0, - ONST = 1, - RETST = 2 -}; - - -/** - * enum clk_arm_t - ARM Cortex A9 clock schemes - * @A9_OFF: - * @A9_BOOT: - * @A9_OPPT1: - * @A9_OPPT2: - * @A9_EXTCLK: - */ -enum clk_arm_t { - A9_OFF, - A9_BOOT, - A9_OPPT1, - A9_OPPT2, - A9_EXTCLK -}; - -/** - * enum clk_gen_t - GEN#0/GEN#1 clock schemes - * @GEN_OFF: - * @GEN_BOOT: - * @GEN_OPPT1: - */ -enum clk_gen_t { - GEN_OFF, - GEN_BOOT, - GEN_OPPT1, -}; - -/* some information between arm and xp70 */ - -/** - * enum romcode_write_t - Romcode message written by A9 AND read by XP70 - * @RDY_2_DS: Value set when ApDeepSleep state can be executed by XP70 - * @RDY_2_XP70_RST: Value set when 0x0F has been successfully polled by the - * romcode. The xp70 will go into self-reset - */ -enum romcode_write_t { - RDY_2_DS = 0x09, - RDY_2_XP70_RST = 0x10 -}; - -/** - * enum romcode_read_t - Romcode message written by XP70 and read by A9 - * @INIT: Init value when romcode field is not used - * @FS_2_DS: Value set when power state is going from ApExecute to - * ApDeepSleep - * @END_DS: Value set when ApDeepSleep power state is reached coming from - * ApExecute state - * @DS_TO_FS: Value set when power state is going from ApDeepSleep to - * ApExecute - * @END_FS: Value set when ApExecute power state is reached coming from - * ApDeepSleep state - * @SWR: Value set when power state is going to ApReset - * @END_SWR: Value set when the xp70 finished executing ApReset actions and - * waits for romcode acknowledgment to go to self-reset - */ -enum romcode_read_t { - INIT = 0x00, - FS_2_DS = 0x0A, - END_DS = 0x0B, - DS_TO_FS = 0x0C, - END_FS = 0x0D, - SWR = 0x0E, - END_SWR = 0x0F -}; - - -/** - * enum pingpong_t - * @PING: value is 0 - * @PONG: value is 1 - * - * implementation issue: the values are chosen the way that - * we can change from ping to pong (resp. pong to ping) by - * simply using the 'not' operator in C, e.g. toggling operation: - * t_PingPong p = ping; p = ~p; - */ -enum pingpong_t { - PING = 0x00, - PONG = 0xFF -}; - -/** - * enum wkup_reason_fdst_t - * @EVTWR: event has been read by ARM - * @EVTST: event has been sent by PRCMU FW - * @EVTRD: event has been written by PRCMU FW - */ -enum wkup_reason_fdst_t { - /* WRF has been written but neither sent nor read by the arm */ - EVTWR = 1, - /* WRF has been written and sent, but not yet read by the arm */ - EVTST = 2, - /* WRF has been written, sent and read by the arm */ - EVTRD = 0 -}; /* Wake-up reason Field State */ - - - -/** - * enum ap_pwrst_t - current power states defined in PRCMU firmware - * @NO_PWRST: Current power state init - * @AP_BOOT: Current power state is apBoot - * @AP_EXECUTE: Current power state is apExecute - * @AP_DEEP_SLEEP: Current power state is apDeepSleep - * @AP_SLEEP: Current power state is apSleep - * @AP_IDLE: Current power state is apIdle - * @AP_RESET: Current power state is apReset - */ -enum ap_pwrst_t { - NO_PWRST = 0x00, - AP_BOOT = 0x01, - AP_EXECUTE = 0x02, - AP_DEEP_SLEEP = 0x03, - AP_SLEEP = 0x04, - AP_IDLE = 0x05, - AP_RESET = 0x06 -}; - -/** - * enum ap_pwrst_trans_t - Transition states defined in PRCMU firmware - * @NO_TRANSITION: No power state transition - * @APEXECUTE_TO_APSLEEP: Power state transition from ApExecute to ApSleep - * @APIDLE_TO_APSLEEP: Power state transition from ApIdle to ApSleep - * @APBOOT_TO_APEXECUTE: Power state transition from ApBoot to ApExecute - * @APEXECUTE_TO_APDEEPSLEEP: Power state transition from ApExecute to - * ApDeepSleep - * @APEXECUTE_TO_APIDLE: Power state transition from ApExecute to ApIdle - */ -enum ap_pwrst_trans_t { - NO_TRANSITION = 0x00, - APEXECUTE_TO_APSLEEP = 0x01, - APIDLE_TO_APSLEEP = 0x02, - APBOOT_TO_APEXECUTE = 0x03, - APEXECUTE_TO_APDEEPSLEEP = 0x04, - APEXECUTE_TO_APIDLE = 0x05 -}; - -/** - * enum ddr_pwrst_t - DDR power states definition - * @DDR_PWR_STATE_UNCHANGED: SDRAM and DDR controller state is unchanged - * @DDR_PWR_STATE_ON: - * @DDR_PWR_STATE_OFFLOWLAT: - * @DDR_PWR_STATE_OFFHIGHLAT: - */ -enum ddr_pwrst_t { - DDR_PWR_STATE_UNCHANGED = 0x00, - DDR_PWR_STATE_ON = 0x01, - DDR_PWR_STATE_OFFLOWLAT = 0x02, - DDR_PWR_STATE_OFFHIGHLAT = 0x03 -}; - -/** - * enum arm_opp_t - ARM OPP states definition - * @ARM_NO_CHANGE: The ARM operating point is unchanged - * @ARM_100_OPP: The new ARM operating point is arm100opp - * @ARM_50_OPP: The new ARM operating point is arm100opp - * @ARM_EXTCLK: The new ARM operating point is armExtClk - */ -enum arm_opp_t { - ARM_NO_CHANGE = 0x00, - ARM_100_OPP = 0x02, - ARM_50_OPP = 0x03, - ARM_EXTCLK = 0x07 -}; - -/** - * enum ape_opp_t - APE OPP states definition - * @APE_NO_CHANGE: The APE operating point is unchanged - * @APE_100_OPP: The new APE operating point is ape100opp - */ -enum ape_opp_t { - APE_NO_CHANGE = 0x00, - APE_100_OPP = 0x02, - APE_50_OPP = 0x03 -}; - -/** - * enum hw_accst_t - State definition for hardware accelerator - * @HW_NO_CHANGE: The hardware accelerator state must remain unchanged - * @HW_OFF: The hardware accelerator must be switched off - * @HW_OFF_RAMRET: The hardware accelerator must be switched off with its - * internal RAM in retention - * @HW_ON: The hwa hadware accelerator hwa must be switched on - */ -enum hw_accst_t { - HW_NO_CHANGE = 0x00, - HW_OFF = 0x01, - HW_OFF_RAMRET = 0x02, - HW_ON = 0x03 -}; - -/** - * enum mbox_2_arm_stat_t - Status messages definition for mbox_arm - * @BOOT_TO_EXECUTEOK: The apBoot to apExecute state transition has been - * completed - * @DEEPSLEEPOK: The apExecute to apDeepSleep state transition has been - * completed - * @SLEEPOK: The apExecute to apSleep state transition has been completed - * @IDLEOK: The apExecute to apIdle state transition has been completed - * @SOFTRESETOK: The A9 watchdog/ SoftReset state has been completed - * @SOFTRESETGO : The A9 watchdog/SoftReset state is on going - * @BOOT_TO_EXECUTE: The apBoot to apExecute state transition is on going - * @EXECUTE_TO_DEEPSLEEP: The apExecute to apDeepSleep state transition is on - * going - * @DEEPSLEEP_TO_EXECUTE: The apDeepSleep to apExecute state transition is on - * going - * @DEEPSLEEP_TO_EXECUTEOK: The apDeepSleep to apExecute state transition has - * been completed - * @EXECUTE_TO_SLEEP: The apExecute to apSleep state transition is on going - * @SLEEP_TO_EXECUTE: The apSleep to apExecute state transition is on going - * @SLEEP_TO_EXECUTEOK: The apSleep to apExecute state transition has been - * completed - * @EXECUTE_TO_IDLE: The apExecute to apIdle state transition is on going - * @IDLE_TO_EXECUTE: The apIdle to apExecute state transition is on going - * @IDLE_TO_EXECUTEOK: The apIdle to apExecute state transition has been - * completed - * @INIT_STATUS: Status init - */ -enum ap_pwrsttr_status_t { - BOOT_TO_EXECUTEOK = 0xFF, - DEEPSLEEPOK = 0xFE, - SLEEPOK = 0xFD, - IDLEOK = 0xFC, - SOFTRESETOK = 0xFB, - SOFTRESETGO = 0xFA, - BOOT_TO_EXECUTE = 0xF9, - EXECUTE_TO_DEEPSLEEP = 0xF8, - DEEPSLEEP_TO_EXECUTE = 0xF7, - DEEPSLEEP_TO_EXECUTEOK = 0xF6, - EXECUTE_TO_SLEEP = 0xF5, - SLEEP_TO_EXECUTE = 0xF4, - SLEEP_TO_EXECUTEOK = 0xF3, - EXECUTE_TO_IDLE = 0xF2, - IDLE_TO_EXECUTE = 0xF1, - IDLE_TO_EXECUTEOK = 0xF0, - RDYTODS_RETURNTOEXE = 0xEF, - NORDYTODS_RETURNTOEXE = 0xEE, - EXETOSLEEP_RETURNTOEXE = 0xED, - EXETOIDLE_RETURNTOEXE = 0xEC, - INIT_STATUS = 0xEB, - - /*error messages */ - INITERROR = 0x00, - PLLARMLOCKP_ER = 0x01, - PLLDDRLOCKP_ER = 0x02, - PLLSOCLOCKP_ER = 0x03, - PLLSOCK1LOCKP_ER = 0x04, - ARMWFI_ER = 0x05, - SYSCLKOK_ER = 0x06, - I2C_NACK_DATA_ER = 0x07, - BOOT_ER = 0x08, - I2C_STATUS_ALWAYS_1 = 0x0A, - I2C_NACK_REG_ADDR_ER = 0x0B, - I2C_NACK_DATA0123_ER = 0x1B, - I2C_NACK_ADDR_ER = 0x1F, - CURAPPWRSTISNOT_BOOT = 0x20, - CURAPPWRSTISNOT_EXECUTE = 0x21, - CURAPPWRSTISNOT_SLEEPMODE = 0x22, - CURAPPWRSTISNOT_CORRECTFORIT10 = 0x23, - FIFO4500WUISNOT_WUPEVENT = 0x24, - PLL32KLOCKP_ER = 0x29, - DDRDEEPSLEEPOK_ER = 0x2A, - ROMCODEREADY_ER = 0x50, - WUPBEFOREDS = 0x51, - DDRCONFIG_ER = 0x52, - WUPBEFORESLEEP = 0x53, - WUPBEFOREIDLE = 0x54 -}; /* earlier called as mbox_2_arm_stat_t */ - - -/** - * enum dvfs_stat_t - DVFS status messages definition - * @DVFS_GO: A state transition DVFS is on going - * @DVFS_ARM100OPPOK: The state transition DVFS has been completed for 100OPP - * @DVFS_ARM50OPPOK: The state transition DVFS has been completed for 50OPP - * @DVFS_ARMEXTCLKOK: The state transition DVFS has been completed for EXTCLK - * @DVFS_NOCHGTCLKOK: The state transition DVFS has been completed for - * NOCHGCLK - * @DVFS_INITSTATUS: Value init - */ -enum dvfs_stat_t { - DVFS_GO = 0xFF, - DVFS_ARM100OPPOK = 0xFE, - DVFS_ARM50OPPOK = 0xFD, - DVFS_ARMEXTCLKOK = 0xFC, - DVFS_NOCHGTCLKOK = 0xFB, - DVFS_INITSTATUS = 0x00 -}; - -/** - * enum mbox_2_arm_hwacc_pwr_stat_t - Hardware Accelarator status message - * @HWACC_PWRST_GO: A state transition on hardware accelerator is on going - * @HWACC_PWRST_OK: The state transition on hardware accelerator has been - * completed - * @HWACC_PWRSTATUS_INIT: Value init - */ -enum mbox_2_arm_hwacc_pwr_stat_t { - HWACC_PWRST_GO = 0xFF, - HWACC_PWRST_OK = 0xFE, - HWACC_PWRSTATUS_INIT = 0x00 -}; - -/** - * enum sva_mmdsp_stat_t - SVA MMDSP status messages - * @SVA_MMDSP_GO: SVAMMDSP interrupt has happened - * @SVA_MMDSP_INIT: Status init - */ -enum sva_mmdsp_stat_t { - SVA_MMDSP_GO = 0xFF, - SVA_MMDSP_INIT = 0x00 -}; - -/** - * enum sia_mmdsp_stat_t - SIA MMDSP status messages - * @SIA_MMDSP_GO: SIAMMDSP interrupt has happened - * @SIA_MMDSP_INIT: Status init - */ -enum sia_mmdsp_stat_t { - SIA_MMDSP_GO = 0xFF, - SIA_MMDSP_INIT = 0x00 -}; - -/** - * enum intr_wakeup_t - Configure STW4500 FIFO interrupt as wake-up - * @NTR_NOT_AS_WAKEUP: The 4500 fifo interrupt is not configured as a - * wake-up event - * @INTR_AS_WAKEUP: The 4500 fifo interrupt is configured as a wake-up event - */ -enum intr_wakeup_t { - INTR_NOT_AS_WAKEUP = 0x0, - INTR_AS_WAKEUP = 0x1 -}; - -/** - * enum mbox_to_arm_err_t - Error messages definition - * @INIT_ERR: Init value - * @PLLARMLOCKP_ERR: PLLARM has not been correctly locked in given time - * @PLLDDRLOCKP_ERR: PLLDDR has not been correctly locked in the given time - * @PLLSOC0LOCKP_ERR: PLLSOC0 has not been correctly locked in the given time - * @PLLSOC1LOCKP_ERR: PLLSOC1 has not been correctly locked in the given time - * @ARMWFI_ERR: The ARM WFI has not been correctly executed in the given time - * @SYSCLKOK_ERR: The SYSCLK is not available in the given time - * @BOOT_ERR: Romcode has not validated the XP70 self reset in the given time - * @ROMCODESAVECONTEXT: The Romcode didn.t correctly save it secure context - * @VARMHIGHSPEEDVALTO_ERR: The ARM high speed supply value transfered - * through I2C has not been correctly executed in the given time - * @VARMHIGHSPEEDACCESS_ERR: The command value of VarmHighSpeedVal transfered - * through I2C has not been correctly executed in the given time - * @VARMLOWSPEEDVALTO_ERR:The ARM low speed supply value transfered through - * I2C has not been correctly executed in the given time - * @VARMLOWSPEEDACCESS_ERR: The command value of VarmLowSpeedVal transfered - * through I2C has not been correctly executed in the given time - * @VARMRETENTIONVALTO_ERR: The ARM retention supply value transfered through - * I2C has not been correctly executed in the given time - * @VARMRETENTIONACCESS_ERR: The command value of VarmRetentionVal transfered - * through I2C has not been correctly executed in the given time - * @VAPEHIGHSPEEDVALTO_ERR: The APE highspeed supply value transfered through - * I2C has not been correctly executed in the given time - * @VSAFEHPVALTO_ERR: The SAFE high power supply value transfered through I2C - * has not been correctly executed in the given time - * @VMODSEL1VALTO_ERR: The MODEM sel1 supply value transfered through I2C has - * not been correctly executed in the given time - * @VMODSEL2VALTO_ERR: The MODEM sel2 supply value transfered through I2C has - * not been correctly executed in the given time - * @VARMOFFACCESS_ERR: The command value of Varm ON/OFF transfered through - * I2C has not been correctly executed in the given time - * @VAPEOFFACCESS_ERR: The command value of Vape ON/OFF transfered through - * I2C has not been correctly executed in the given time - * @VARMRETACCES_ERR: The command value of Varm retention ON/OFF transfered - * through I2C has not been correctly executed in the given time - * @CURAPPWRSTISNOTBOOT:Generated when Arm want to do power state transition - * ApBoot to ApExecute but the power current state is not Apboot - * @CURAPPWRSTISNOTEXECUTE: Generated when Arm want to do power state - * transition from ApExecute to others power state but the - * power current state is not ApExecute - * @CURAPPWRSTISNOTSLEEPMODE: Generated when wake up events are transmitted - * but the power current state is not ApDeepSleep/ApSleep/ApIdle - * @CURAPPWRSTISNOTCORRECTDBG: Generated when wake up events are transmitted - * but the power current state is not correct - * @ARMREGU1VALTO_ERR:The ArmRegu1 value transferred through I2C has not - * been correctly executed in the given time - * @ARMREGU2VALTO_ERR: The ArmRegu2 value transferred through I2C has not - * been correctly executed in the given time - * @VAPEREGUVALTO_ERR: The VApeRegu value transfered through I2C has not - * been correctly executed in the given time - * @VSMPS3REGUVALTO_ERR: The VSmps3Regu value transfered through I2C has not - * been correctly executed in the given time - * @VMODREGUVALTO_ERR: The VModemRegu value transfered through I2C has not - * been correctly executed in the given time - */ -enum mbox_to_arm_err_t { - INIT_ERR = 0x00, - PLLARMLOCKP_ERR = 0x01, - PLLDDRLOCKP_ERR = 0x02, - PLLSOC0LOCKP_ERR = 0x03, - PLLSOC1LOCKP_ERR = 0x04, - ARMWFI_ERR = 0x05, - SYSCLKOK_ERR = 0x06, - BOOT_ERR = 0x07, - ROMCODESAVECONTEXT = 0x08, - VARMHIGHSPEEDVALTO_ERR = 0x10, - VARMHIGHSPEEDACCESS_ERR = 0x11, - VARMLOWSPEEDVALTO_ERR = 0x12, - VARMLOWSPEEDACCESS_ERR = 0x13, - VARMRETENTIONVALTO_ERR = 0x14, - VARMRETENTIONACCESS_ERR = 0x15, - VAPEHIGHSPEEDVALTO_ERR = 0x16, - VSAFEHPVALTO_ERR = 0x17, - VMODSEL1VALTO_ERR = 0x18, - VMODSEL2VALTO_ERR = 0x19, - VARMOFFACCESS_ERR = 0x1A, - VAPEOFFACCESS_ERR = 0x1B, - VARMRETACCES_ERR = 0x1C, - CURAPPWRSTISNOTBOOT = 0x20, - CURAPPWRSTISNOTEXECUTE = 0x21, - CURAPPWRSTISNOTSLEEPMODE = 0x22, - CURAPPWRSTISNOTCORRECTDBG = 0x23, - ARMREGU1VALTO_ERR = 0x24, - ARMREGU2VALTO_ERR = 0x25, - VAPEREGUVALTO_ERR = 0x26, - VSMPS3REGUVALTO_ERR = 0x27, - VMODREGUVALTO_ERR = 0x28 -}; - -enum hw_acc_t { - SVAMMDSP = 0, - SVAPIPE = 1, - SIAMMDSP = 2, - SIAPIPE = 3, - SGA = 4, - B2R2MCDE = 5, - ESRAM1 = 6, - ESRAM2 = 7, - ESRAM3 = 8, - ESRAM4 = 9 -}; - -enum reqmb0_header_t { - PWRSTTRH = 0, - WKUPCFG_EXEH = 1, - WKUP_EXEH = 2, - RDWKUPACKH = 3, - WKUPCFG_SLEEPH = 4, - WKUP_SLEEPH = 5, -}; - -enum cs_pwrmgt_t { - PWRDNCS0 = 0, - WKUPCS0 = 1, - PWRDNCS1 = 2, - WKUPCS1 = 3 -}; - -enum reqmb2_header_t { - DPS_H = 0, - HW_ACCT_AUTO_PWR_H = 1, -}; - - -/* Defs related to autonomous power management */ - -/** - * enum sia_sva_pwr_policy_t - Power policy - * @NO_CHGT: No change - * @DSPOFF_HWPOFF: - * @DSPOFFRAMRET_HWPOFF: - * @DSPCLKOFF_HWPOFF: - * @DSPCLKOFF_HWPCLKOFF: - * - */ -enum sia_sva_pwr_policy_t { - NO_CHGT = 0x0, - DSPOFF_HWPOFF = 0x1, - DSPOFFRAMRET_HWPOFF = 0x2, - DSPCLKOFF_HWPOFF = 0x3, - DSPCLKOFF_HWPCLKOFF = 0x4, -}; - -/** - * enum auto_enable_t - Auto Power enable - * @AUTO_OFF: - * @AUTO_ON: - * - */ -enum auto_enable_t { - AUTO_OFF = 0x0, - AUTO_ON = 0x1, -}; - - -/** - * enum reqmb4_header_t -Header type for mail box 4 - * @MEMSTH: The ARM can set what are the expected memory states depending on - * the AP power states. - * @PARTIALREFRESHH: ARM has to update MR16 & MR17 of SDRAM register, for - * partial-refresh of SDRAM, via this mailbox - * @AUTOREFRESHH: Enable to change cycle count before enabling automatic - * DDR self-refresh - * @CSPWRDNH: Enables to lock/unlock one of SDRAM memory cut in self-refresh - * In V2,this service will enable to put CS in pwrdn - * @SYSCLKH: Enables to switch SYSCLK ON/OFF on the AP side - * @USBWKUPH: Used to enable USB wakeup event of PRCMU - */ -enum reqmb4_header_t { - MEM_ST_H = 0, - PARTIAL_S_REFRESH_H = 1, - AUTO_REFRESH_H = 2, - CS_PWRDN_H = 3, - SYSCLK_H = 5, - AUTO_PWR_H = 6, - USB_WKUP_H = 7 -}; - -enum ack_mb4_status_t { - ACKMB4_INIT = 0, - SYSCLKON_OK = 1, - DDRON_OK = 2 -}; - -enum I2C_op_t { - I2CWRITE = 0, - I2CREAD = 1 -}; - -enum ack_mb5_status_t { - ACKMB5_INIT = 0x00, - I2C_WR_OK = 0x01, - I2C_RD_OK = 0x02, - SYSCLK_OK = 0x03, - I2C_TIMEOUT = 0x11, - SYSCLK_ER = 0x12, - /*Error Status resent by PRCM_HWI2C_SR*/ - I2CWR_NACK_DATA_ER = 0x07, - I2CWR_NACK_REG_ADDR_ER = 0x0B, - I2CRDWR_NACK_DATA0123_ER = 0x1B, - I2CWR_NACK_ADDR_ER = 0x1F, - I2CRD_NACK_ADDR_INIT_ER = 0x0F, - I2CRD_NACK_REG_ADDR_INIT_ER = 0x13, - I2CRD_NACK_ADDR_ER = 0x17 -}; - -enum ack_mb7_status_t { - MOD_SW_RESET_REQ = 0x03, - CA_SLEEP_REQ = 0x02, - HOST_PORT_ACK = 0x01, - ACKMB7_INIT = 0x00 -}; - -#endif /* __MACH_PRCMU_FW_DEFS_V1_H */ -- cgit v1.2.3