From c28d3bbe963f4c57937d6fdc1dd63cd3562c147c Mon Sep 17 00:00:00 2001 From: Wolfgang Grandegger Date: Fri, 23 Oct 2009 12:03:13 +0200 Subject: video: mb862xx: improve board-specific Lime configuration To avoid board-specific code accessing the mb862xx registers directly, the public function mb862xx_probe() has been introduced. Furthermore, the "Change of Clock Frequency" and "Set Memory I/F Mode" registers are now defined by CONFIG_SYS_MB862xx_CCF and CONFIG_SYS_MB862xx__MMR, respectively. The BSPs for the socrates and lwmon5 boards have been adapted accordingly. Signed-off-by: Wolfgang Grandegger --- board/lwmon5/lwmon5.c | 7 ------- board/socrates/socrates.c | 46 +++++++--------------------------------------- 2 files changed, 7 insertions(+), 46 deletions(-) (limited to 'board') diff --git a/board/lwmon5/lwmon5.c b/board/lwmon5/lwmon5.c index ef7f2e8dc..d36ea04e8 100644 --- a/board/lwmon5/lwmon5.c +++ b/board/lwmon5/lwmon5.c @@ -532,13 +532,6 @@ unsigned int board_video_init (void) udelay(500); gpio_write_bit(CONFIG_SYS_GPIO_LIME_RST, 1); - /* Lime memory clock adjusted to 100MHz */ - out_be32((void *)CONFIG_SYS_LIME_SDRAM_CLOCK, CONFIG_SYS_LIME_CLOCK_100MHZ); - /* Wait untill time expired. Because of requirements in lime manual */ - udelay(300); - /* Write lime controller memory parameters */ - out_be32((void *)CONFIG_SYS_LIME_MMR, CONFIG_SYS_LIME_MMR_VALUE); - mb862xx.winSizeX = 640; mb862xx.winSizeY = 480; mb862xx.gdfBytesPP = 2; diff --git a/board/socrates/socrates.c b/board/socrates/socrates.c index 51d66d517..9183c15f2 100644 --- a/board/socrates/socrates.c +++ b/board/socrates/socrates.c @@ -268,17 +268,6 @@ ft_board_setup(void *blob, bd_t *bd) } #endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ -#define CONFIG_SYS_LIME_SRST ((CONFIG_SYS_LIME_BASE) + 0x01FC002C) -#define CONFIG_SYS_LIME_CCF ((CONFIG_SYS_LIME_BASE) + 0x01FC0038) -#define CONFIG_SYS_LIME_MMR ((CONFIG_SYS_LIME_BASE) + 0x01FCFFFC) -/* Lime clock frequency */ -#define CONFIG_SYS_LIME_CLK_100MHZ 0x00000 -#define CONFIG_SYS_LIME_CLK_133MHZ 0x10000 -/* SDRAM parameter */ -#define CONFIG_SYS_LIME_MMR_VALUE 0x4157BA63 - -#define DISPLAY_WIDTH 800 -#define DISPLAY_HEIGHT 480 #define DEFAULT_BRIGHTNESS 25 #define BACKLIGHT_ENABLE (1 << 31) @@ -308,14 +297,12 @@ const gdc_regs *board_get_regs (void) return init_regs; } -#define CONFIG_SYS_LIME_CID ((CONFIG_SYS_LIME_BASE) + 0x01FC00F0) -#define CONFIG_SYS_LIME_REV ((CONFIG_SYS_LIME_BASE) + 0x01FF8084) int lime_probe(void) { volatile ccsr_lbc_t *memctl = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); uint cfg_br2; uint cfg_or2; - uint reg; + int type; cfg_br2 = memctl->br2; cfg_or2 = memctl->or2; @@ -325,21 +312,15 @@ int lime_probe(void) memctl->or2 = 0xfc000410; memctl->br2 = (CONFIG_SYS_LIME_BASE) | 0x00001901; - /* Try to access GDC ID/Revision registers */ - reg = in_be32((void *)CONFIG_SYS_LIME_CID); - reg = in_be32((void *)CONFIG_SYS_LIME_CID); - if (reg == 0x303) { - reg = in_be32((void *)CONFIG_SYS_LIME_REV); - reg = in_be32((void *)CONFIG_SYS_LIME_REV); - reg = ((reg & ~0xff) == 0x20050100) ? 1 : 0; - } else - reg = 0; + /* Get controller type */ + type = mb862xx_probe(CONFIG_SYS_LIME_BASE); /* Restore previous CS2 configuration */ memctl->br2 = 0; memctl->or2 = cfg_or2; memctl->br2 = cfg_br2; - return reg; + + return (type == MB862XX_TYPE_LIME) ? 1 : 0; } /* Returns Lime base address */ @@ -348,21 +329,8 @@ unsigned int board_video_init (void) if (!lime_probe()) return 0; - /* - * Reset Lime controller - */ - out_be32((void *)CONFIG_SYS_LIME_SRST, 0x1); - udelay(200); - - /* Set Lime clock to 133MHz */ - out_be32((void *)CONFIG_SYS_LIME_CCF, CONFIG_SYS_LIME_CLK_133MHZ); - /* Delay required */ - udelay(300); - /* Set memory parameters */ - out_be32((void *)CONFIG_SYS_LIME_MMR, CONFIG_SYS_LIME_MMR_VALUE); - - mb862xx.winSizeX = DISPLAY_WIDTH; - mb862xx.winSizeY = DISPLAY_HEIGHT; + mb862xx.winSizeX = 800; + mb862xx.winSizeY = 480; mb862xx.gdfIndex = GDF_15BIT_555RGB; mb862xx.gdfBytesPP = 2; -- cgit v1.2.3 From cd12f615e4dd1dd24caab93f4157894783c6c1c0 Mon Sep 17 00:00:00 2001 From: Wolfgang Grandegger Date: Fri, 23 Oct 2009 12:03:16 +0200 Subject: mpc52xx: add support for the IPEK01 board This patch adds support for the board IPEK01 based on the MPC5200. The Futjitsu Lime graphics controller is configured in 16 bpp mode. Signed-off-by: Wolfgang Grandegger --- MAINTAINERS | 2 + MAKEALL | 1 + Makefile | 3 + board/ipek01/Makefile | 50 ++++++ board/ipek01/config.mk | 30 ++++ board/ipek01/ipek01.c | 282 ++++++++++++++++++++++++++++++++ include/configs/ipek01.h | 408 +++++++++++++++++++++++++++++++++++++++++++++++ 7 files changed, 776 insertions(+) create mode 100644 board/ipek01/Makefile create mode 100644 board/ipek01/config.mk create mode 100644 board/ipek01/ipek01.c create mode 100644 include/configs/ipek01.h (limited to 'board') diff --git a/MAINTAINERS b/MAINTAINERS index d70a9d22d..7eb3613ac 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -201,6 +201,8 @@ Frank Gottschling Wolfgang Grandegger + ipek01 MPC5200 + CCM MPC855 PN62 MPC8240 diff --git a/MAKEALL b/MAKEALL index d63c5c216..5a0542234 100755 --- a/MAKEALL +++ b/MAKEALL @@ -63,6 +63,7 @@ LIST_5xxx=" \ icecube_5100 \ icecube_5200 \ inka4x0 \ + ipek01 \ lite5200b \ mcc200 \ mecp5200 \ diff --git a/Makefile b/Makefile index bcb3fe953..96b23bcf5 100644 --- a/Makefile +++ b/Makefile @@ -606,6 +606,9 @@ jupiter_config: unconfig inka4x0_config: unconfig @$(MKCONFIG) inka4x0 ppc mpc5xxx inka4x0 +ipek01_config: unconfig + @$(MKCONFIG) -a ipek01 ppc mpc5xxx ipek01 + lite5200b_config \ lite5200b_PM_config \ lite5200b_LOWBOOT_config: unconfig diff --git a/board/ipek01/Makefile b/board/ipek01/Makefile new file mode 100644 index 000000000..ddfd2ef8a --- /dev/null +++ b/board/ipek01/Makefile @@ -0,0 +1,50 @@ +# +# (C) Copyright 2003-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := $(BOARD).o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/ipek01/config.mk b/board/ipek01/config.mk new file mode 100644 index 000000000..c8ecb2944 --- /dev/null +++ b/board/ipek01/config.mk @@ -0,0 +1,30 @@ +# +# (C) Copyright 2003-2004 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# +# IPEK01 board +# + +TEXT_BASE = 0xfc000000 + +PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board diff --git a/board/ipek01/ipek01.c b/board/ipek01/ipek01.c new file mode 100644 index 000000000..463a81be2 --- /dev/null +++ b/board/ipek01/ipek01.c @@ -0,0 +1,282 @@ +/* + * (C) Copyright 2003-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2004 + * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com. + * + * (C) Copyright 2006 + * MicroSys GmbH + * + * (C) Copyright 2009 + * Wolfgang Grandegger, DENX Software Engineering, wg@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#ifdef CONFIG_OF_LIBFDT +#include +#endif /* CONFIG_OF_LIBFDT */ + +/* mt46v16m16-75 */ +#ifdef CONFIG_MPC5200_DDR +/* Settings for XLB = 132 MHz */ +#define SDRAM_MODE 0x018D0000 +#define SDRAM_EMODE 0x40090000 +#define SDRAM_CONTROL 0x714f0f00 +#define SDRAM_CONFIG1 0x73722930 +#define SDRAM_CONFIG2 0x47770000 +#define SDRAM_TAPDELAY 0x10000000 +#else +#error SDRAM is not supported on this board +#endif + +DECLARE_GLOBAL_DATA_PTR; + +static void sdram_start (int hi_addr) +{ + struct mpc5xxx_sdram *sdram = (struct mpc5xxx_sdram *)MPC5XXX_SDRAM; + long hi_addr_bit = hi_addr ? 0x01000000 : 0; + + /* unlock mode register */ + out_be32 (&sdram->ctrl, SDRAM_CONTROL | 0x80000000 | hi_addr_bit); + + /* precharge all banks */ + out_be32 (&sdram->ctrl, SDRAM_CONTROL | 0x80000002 | hi_addr_bit); + + /* set mode register: extended mode */ + out_be32 (&sdram->mode, SDRAM_EMODE); + + /* set mode register: reset DLL */ + out_be32 (&sdram->mode, SDRAM_MODE | 0x04000000); + + /* precharge all banks */ + out_be32 (&sdram->ctrl, SDRAM_CONTROL | 0x80000002 | hi_addr_bit); + + /* auto refresh */ + out_be32 (&sdram->ctrl, SDRAM_CONTROL | 0x80000004 | hi_addr_bit); + + /* set mode register */ + out_be32 (&sdram->mode, SDRAM_MODE); + + /* normal operation */ + out_be32 (&sdram->ctrl, SDRAM_CONTROL | hi_addr_bit); +} + +/* + * ATTENTION: Although partially referenced initdram does NOT make real + * use of CONFIG_SYS_SDRAM_BASE. The code does not work if + * CONFIG_SYS_SDRAM_BASE is something else than 0x00000000. + */ + +phys_size_t initdram (int board_type) +{ + struct mpc5xxx_mmap_ctl *mmap_ctl = + (struct mpc5xxx_mmap_ctl *)CONFIG_SYS_MBAR; + struct mpc5xxx_sdram *sdram = (struct mpc5xxx_sdram *)MPC5XXX_SDRAM; + struct mpc5xxx_cdm *cdm = (struct mpc5xxx_cdm *)MPC5XXX_CDM; + ulong dramsize = 0; + ulong dramsize2 = 0; + ulong test1, test2; + + /* setup SDRAM chip selects */ + out_be32 (&mmap_ctl->sdram0, 0x0000001e); /* 2G at 0x0 */ + out_be32 (&mmap_ctl->sdram1, 0x00000000); /* disabled */ + + /* setup config registers */ + out_be32 (&sdram->config1, SDRAM_CONFIG1); + out_be32 (&sdram->config2, SDRAM_CONFIG2); + + /* set tap delay */ + out_be32 (&cdm->porcfg, SDRAM_TAPDELAY); + + /* find RAM size using SDRAM CS0 only */ + sdram_start (0); + test1 = get_ram_size ((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000); + sdram_start (1); + test2 = get_ram_size ((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000); + if (test1 > test2) { + sdram_start (0); + dramsize = test1; + } else { + dramsize = test2; + } + + /* memory smaller than 1MB is impossible */ + if (dramsize < (1 << 20)) + dramsize = 0; + + /* set SDRAM CS0 size according to the amount of RAM found */ + if (dramsize > 0) + out_be32 (&mmap_ctl->sdram0, + 0x13 + __builtin_ffs (dramsize >> 20) - 1); + else + out_be32 (&mmap_ctl->sdram1, 0); /* disabled */ + + /* + * On MPC5200B we need to set the special configuration delay in the + * DDR controller. Please refer to Freescale's AN3221 "MPC5200B SDRAM + * Initialization and Configuration", 3.3.1 SDelay--MBAR + 0x0190: + * + * "The SDelay should be written to a value of 0x00000004. It is + * required to account for changes caused by normal wafer processing + * parameters." + */ + out_be32 (&sdram->sdelay, 0x04); + + return dramsize + dramsize2; +} + +int checkboard (void) +{ + puts ("Board: IPEK01 \n"); + return 0; +} + +void flash_preinit (void) +{ + struct mpc5xxx_lpb *lpb = (struct mpc5xxx_lpb *)MPC5XXX_LPB; + + /* + * Now, when we are in RAM, enable flash write + * access for detection process. + * Note that CS_BOOT cannot be cleared when + * executing in flash. + */ + clrbits_be32 (&lpb->cs0_cfg, 0x1); /* clear RO */ +} + +void flash_afterinit (ulong start, ulong size) +{ + struct mpc5xxx_mmap_ctl *mmap_ctl = + (struct mpc5xxx_mmap_ctl *)CONFIG_SYS_MBAR; + +#if defined(CONFIG_BOOT_ROM) + /* adjust mapping */ + out_be32 (&mmap_ctl->cs1_start, START_REG (start)); + out_be32 (&mmap_ctl->cs1_stop, STOP_REG (start, size)); +#else + /* adjust mapping */ + out_be32 (&mmap_ctl->boot_start, START_REG (start)); + out_be32 (&mmap_ctl->cs0_start, START_REG (start)); + out_be32 (&mmap_ctl->boot_stop, STOP_REG (start, size)); + out_be32 (&mmap_ctl->cs0_stop, STOP_REG (start, size)); +#endif +} + +extern flash_info_t flash_info[]; /* info for FLASH chips */ + +int misc_init_r (void) +{ + /* adjust flash start */ + gd->bd->bi_flashstart = flash_info[0].start[0]; + return (0); +} + +#ifdef CONFIG_PCI +static struct pci_controller hose; + +extern void pci_mpc5xxx_init (struct pci_controller *); + +void pci_init_board (void) +{ + pci_mpc5xxx_init (&hose); +} +#endif + +#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) +void ft_board_setup (void *blob, bd_t * bd) +{ + ft_cpu_setup (blob, bd); + fdt_fixup_memory (blob, (u64) bd->bi_memstart, (u64) bd->bi_memsize); +} +#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ + +int board_eth_init(bd_t *bis) +{ + cpu_eth_init(bis); /* Built in FEC comes first */ + return pci_eth_init(bis); +} + +#ifdef CONFIG_VIDEO +extern GraphicDevice mb862xx; + +static const gdc_regs init_regs[] = { + {0x0100, 0x00000900}, + {0x0020, 0x80190257}, + {0x0024, 0x00000000}, + {0x0028, 0x00000000}, + {0x002c, 0x00000000}, + {0x0110, 0x00000000}, + {0x0114, 0x00000000}, + {0x0118, 0x02570320}, + {0x0004, 0x041f0000}, + {0x0008, 0x031f031f}, + {0x000c, 0x067f0347}, + {0x0010, 0x02780000}, + {0x0014, 0x0257025c}, + {0x0018, 0x00000000}, + {0x001c, 0x02570320}, + {0x0100, 0x80010900}, + {0x0, 0x0} +}; + +const gdc_regs *board_get_regs (void) +{ + return init_regs; +} + +/* Returns Lime base address */ +unsigned int board_video_init (void) +{ + if (mb862xx_probe (CONFIG_SYS_LIME_BASE) != MB862XX_TYPE_LIME) + return 0; + + mb862xx.winSizeX = 800; + mb862xx.winSizeY = 600; + mb862xx.gdfIndex = GDF_15BIT_555RGB; + mb862xx.gdfBytesPP = 2; + + return CONFIG_SYS_LIME_BASE; +} + +#if defined(CONFIG_CONSOLE_EXTRA_INFO) +/* + * Return text to be printed besides the logo. + */ +void video_get_info_str (int line_number, char *info) +{ + if (line_number == 1) + strcpy (info, " Board: IPEK01"); + else + info[0] = '\0'; +} +#endif +#endif /* CONFIG_VIDEO */ diff --git a/include/configs/ipek01.h b/include/configs/ipek01.h new file mode 100644 index 000000000..d9028fae3 --- /dev/null +++ b/include/configs/ipek01.h @@ -0,0 +1,408 @@ +/* + * (C) Copyright 2006 + * MicroSys GmbH + * + * (C) Copyright 2009 + * Wolfgang Grandegger, DENX Software Engineering, wg@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ + +#define CONFIG_MPC5200 +#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ +#define CONFIG_MPX5200 1 /* ... on MPX5200 board */ +#define CONFIG_MPC5200_DDR 1 /* ... use DDR RAM */ +#define CONFIG_IPEK01 /* Motherboard is ipek01 */ + +#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33MHz */ + +#define CONFIG_MISC_INIT_R + +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#ifdef CONFIG_CMD_KGDB +#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +/* + * Serial console configuration + */ +#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ +#define CONFIG_BAUDRATE 115200 /* ... at 9600 bps */ +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } + +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ + +/* + * Video configuration for LIME GDC + */ +#define CONFIG_VIDEO +#ifdef CONFIG_VIDEO +#define CONFIG_VIDEO_MB862xx +#define CONFIG_VIDEO_MB862xx_ACCEL +#define VIDEO_FB_16BPP_WORD_SWAP +#define CONFIG_CFB_CONSOLE +#define CONFIG_VIDEO_LOGO +#define CONFIG_VIDEO_BMP_LOGO +#define CONFIG_CONSOLE_EXTRA_INFO +#define CONFIG_VGA_AS_SINGLE_DEVICE +#define CONFIG_SYS_CONSOLE_IS_IN_ENV +#define CONFIG_VIDEO_SW_CURSOR +#define CONFIG_SPLASH_SCREEN +#define CONFIG_VIDEO_BMP_GZIP +#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (2 << 20) /* decompressed img */ +/* Lime clock frequency */ +#define CONFIG_SYS_MB862xx_CCF 0x90000 /* geo 166MHz other 133MHz */ +/* SDRAM parameter */ +#define CONFIG_SYS_MB862xx_MMR 0x41c767e3 +#endif + +/* + * PCI Mapping: + * 0x40000000 - 0x4fffffff - PCI Memory + * 0x50000000 - 0x50ffffff - PCI IO Space + */ +#define CONFIG_PCI 1 +#define CONFIG_PCI_PNP 1 +#define CONFIG_PCI_SCAN_SHOW 1 + +#define CONFIG_PCI_MEM_BUS 0x40000000 +#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS +#define CONFIG_PCI_MEM_SIZE 0x10000000 + +#define CONFIG_PCI_IO_BUS 0x50000000 +#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS +#define CONFIG_PCI_IO_SIZE 0x01000000 + +#define CONFIG_NET_MULTI 1 +#define CONFIG_MII 1 +#define CONFIG_EEPRO100 1 +#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ + +/* Partitions */ +#define CONFIG_DOS_PARTITION + +/* USB */ +#define CONFIG_USB_OHCI_NEW +#define CONFIG_SYS_OHCI_BE_CONTROLLER +#define CONFIG_USB_STORAGE + +#define CONFIG_SYS_USB_OHCI_CPU_INIT +#define CONFIG_SYS_USB_OHCI_REGS_BASE MPC5XXX_USB +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "mpc5200" +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15 + +/* + * Command line configuration. + */ +#include + +#ifdef CONFIG_VIDEO +#define CONFIG_CMD_BMP /* BMP support */ +#endif +#define CONFIG_CMD_DATE /* support for RTC, date/time...*/ +#define CONFIG_CMD_DHCP /* DHCP Support */ +#define CONFIG_CMD_FAT /* FAT support */ +#define CONFIG_CMD_I2C /* I2C serial bus support */ +#define CONFIG_CMD_IDE /* IDE harddisk support */ +#define CONFIG_CMD_IRQ /* irqinfo */ +#define CONFIG_CMD_MII /* MII support */ +#define CONFIG_CMD_PCI /* pciinfo */ +#define CONFIG_CMD_USB /* USB Support */ + +#define CONFIG_SYS_LOWBOOT 1 + +/* + * Autobooting + */ +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ + +#define CONFIG_PREBOOT "echo;" \ + "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \ + "echo" + +#undef CONFIG_BOOTARGS + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "consoledev=ttyPSC0\0" \ + "hostname=ipek01\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addtty=setenv bootargs ${bootargs} " \ + "console=${consoledev},${baudrate}\0" \ + "flash_nfs=run nfsargs addip addtty;" \ + "bootm ${kernel_addr} - ${fdtaddr}\0" \ + "flash_self=run ramargs addip addtty;" \ + "bootm ${kernel_addr} ${ramdisk_addr} ${fdtaddr}\0" \ + "net_nfs=tftp 200000 ${bootfile}; tftp ${fdtaddr} ${fdtfile};" \ + "run nfsargs addip addtty;" \ + "bootm ${loadaddr} - ${fdtaddr}\0" \ + "rootpath=/opt/eldk/ppc_6xx\0" \ + "bootfile=ipek01/uImage\0" \ + "load=tftp 100000 ipek01/u-boot.bin\0" \ + "update=protect off FC000000 +60000; era FC000000 +60000; " \ + "cp.b 100000 FC000000 ${filesize}\0" \ + "upd=run load;run update\0" \ + "fdtaddr=800000\0" \ + "loadaddr=400000\0" \ + "fdtfile=ipek01/ipek01.dtb\0" \ + "" + +#define CONFIG_BOOTCOMMAND "run flash_self" + +/* + * IPB Bus clocking configuration. + */ +#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* for 133MHz */ +/* PCI clock must be 33, because board will not boot */ +#undef CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2 /* for 66MHz */ + +/* + * Open firmware flat tree support + */ +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 + +#define OF_CPU "PowerPC,5200@0" +#define OF_SOC "soc5200@f0000000" +#define OF_TBCLK (bd->bi_busfreq / 4) + +/* + * I2C configuration + */ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#define CONFIG_SYS_I2C_MODULE 2 /* Select I2C module #1 or #2 */ + +#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */ +#define CONFIG_SYS_I2C_SLAVE 0x7F + +/* + * EEPROM configuration + */ +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x53 +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 + +/* + * RTC configuration + */ +#define CONFIG_RTC_PCF8563 +#define CONFIG_SYS_I2C_RTC_ADDR 0x51 + +#define CONFIG_SYS_FLASH_BASE 0xFC000000 +#define CONFIG_SYS_FLASH_SIZE 0x01000000 +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + \ + CONFIG_SYS_MONITOR_LEN) + +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max num of sects on one chip */ +#define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ + +/* use CFI flash driver */ +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_SYS_FLASH_EMPTY_INFO +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 + +/* + * Environment settings + */ +#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_SIZE 0x10000 +#define CONFIG_ENV_SECT_SIZE 0x20000 +#define CONFIG_ENV_OVERWRITE 1 +#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE + +/* + * Memory map + */ +#define CONFIG_SYS_MBAR 0xf0000000 +#define CONFIG_SYS_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_DEFAULT_MBAR 0x80000000 +#define CONFIG_SYS_SRAM_BASE 0xF1000000 +#define CONFIG_SYS_SRAM_SIZE 0x00200000 +#define CONFIG_SYS_LIME_BASE 0xE4000000 +#define CONFIG_SYS_LIME_SIZE 0x04000000 +#define CONFIG_SYS_FPGA_BASE 0xC0000000 +#define CONFIG_SYS_FPGA_SIZE 0x10000000 +#define CONFIG_SYS_MPEG_BASE 0xe2000000 +#define CONFIG_SYS_MPEG_SIZE 0x01000000 +#define CONFIG_SYS_CF_BASE 0xe1000000 +#define CONFIG_SYS_CF_SIZE 0x01000000 + +/* Use SRAM until RAM will be available */ +#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM +/* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_SIZE + + + +/* size in bytes reserved for initial data */ +#define CONFIG_SYS_GBL_DATA_SIZE 128 + +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - \ + CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET + +#define CONFIG_SYS_MONITOR_BASE TEXT_BASE +#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) +# define CONFIG_SYS_RAMBOOT 1 +#endif + +#define CONFIG_SYS_MONITOR_LEN (384 << 10) /* Reserve 384 kB for Monitor */ +#define CONFIG_SYS_MALLOC_LEN (4 << 20) /* Reserve 128 kB for malloc() */ +#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/* + * Ethernet configuration + */ +#define CONFIG_MPC5xxx_FEC 1 +#define CONFIG_MPC5xxx_FEC_MII100 +#define CONFIG_PHY_ADDR 0x00 + +/* + * GPIO configuration + */ +#define CONFIG_SYS_GPS_PORT_CONFIG 0x1d556624 + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ +#ifdef CONFIG_CMD_KGDB +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +/* max number of command args */ +#define CONFIG_SYS_MAXARGS 16 +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + + +#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1...15 MB in DRAM */ + +#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ + +#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CONFIG_LOOPW + +/* + * Various low-level settings + */ +#if defined(CONFIG_MPC5200) +#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI +#define CONFIG_SYS_HID0_FINAL HID0_ICE +#else +#define CONFIG_SYS_HID0_INIT 0 +#define CONFIG_SYS_HID0_FINAL 0 +#endif + +#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE +#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE +#define CONFIG_SYS_CS1_START CONFIG_SYS_SRAM_BASE +#define CONFIG_SYS_CS1_SIZE CONFIG_SYS_SRAM_SIZE +#define CONFIG_SYS_CS3_START CONFIG_SYS_LIME_BASE +#define CONFIG_SYS_CS3_SIZE CONFIG_SYS_LIME_SIZE +#define CONFIG_SYS_CS6_START CONFIG_SYS_FPGA_BASE +#define CONFIG_SYS_CS6_SIZE CONFIG_SYS_FPGA_SIZE +#define CONFIG_SYS_CS5_START CONFIG_SYS_CF_BASE +#define CONFIG_SYS_CS5_SIZE CONFIG_SYS_CF_SIZE +#define CONFIG_SYS_CS7_START CONFIG_SYS_MPEG_BASE +#define CONFIG_SYS_CS7_SIZE CONFIG_SYS_MPEG_SIZE + +#ifdef CONFIG_SYS_PCISPEED_66 +#define CONFIG_SYS_BOOTCS_CFG 0x0006F900 +#define CONFIG_SYS_CS1_CFG 0x0004FB00 +#define CONFIG_SYS_CS2_CFG 0x0006F900 +#else +#define CONFIG_SYS_BOOTCS_CFG 0x0002F900 +#define CONFIG_SYS_CS1_CFG 0x0001FB00 +#define CONFIG_SYS_CS2_CFG 0x0002F90C +#endif + +/* + * Ack active, Muxed mode, AS=24 bit address, DS=32 bit data, 0 + * waitstates, writeswap and readswap enabled + */ +#define CONFIG_SYS_CS3_CFG 0x00FFFB0C +#define CONFIG_SYS_CS6_CFG 0x00FFFB0C +#define CONFIG_SYS_CS7_CFG 0x4040751C + +#define CONFIG_SYS_CS_BURST 0x00000000 +#define CONFIG_SYS_CS_DEADCYCLE 0x33330000 + +#define CONFIG_SYS_RESET_ADDRESS 0xff000000 + +/*----------------------------------------------------------------------- + * USB stuff + *----------------------------------------------------------------------- + */ +#define CONFIG_USB_CLOCK 0x0001BBBB +#define CONFIG_USB_CONFIG 0x00005000 + +/*----------------------------------------------------------------------- + * IDE/ATA stuff Supports IDE harddisk + *----------------------------------------------------------------------- + */ +#define CONFIG_IDE_PREINIT + +#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ +#define CONFIG_SYS_IDE_MAXDEVICE 2 /* max. 2 drives per IDE bus */ + +#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 + +#define CONFIG_SYS_ATA_BASE_ADDR MPC5XXX_ATA + +/* Offset for data I/O */ +#define CONFIG_SYS_ATA_DATA_OFFSET (0x0060) + +/* Offset for normal register accesses */ +#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET) + +/* Offset for alternate registers */ +#define CONFIG_SYS_ATA_ALT_OFFSET (0x005C) + +/* Interval between registers */ +#define CONFIG_SYS_ATA_STRIDE 4 + +#endif /* __CONFIG_H */ -- cgit v1.2.3 From ceaa62a6f0237a8ddd2a5f659e6535fcd054332f Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Tue, 27 Oct 2009 15:57:24 +0100 Subject: ppc4xx: Fix problems in some ppc4xx board Makefiles Some 4xx Makefiles didn't add $(SOBJ) to their board library. This was no till now problem, since those boards included this object (init.o most of the time) directly from their linker scripts. This patch clean this up, so that all objects are now collected in the board library. This is in preparation for the upcoming PPC4xx linker script consolidation. Signed-off-by: Stefan Roese --- board/eric/Makefile | 2 +- board/jse/Makefile | 2 +- board/ml2/Makefile | 2 +- board/mpl/mip405/Makefile | 2 +- board/mpl/pip405/Makefile | 2 +- 5 files changed, 5 insertions(+), 5 deletions(-) (limited to 'board') diff --git a/board/eric/Makefile b/board/eric/Makefile index 81a455202..c2a687280 100644 --- a/board/eric/Makefile +++ b/board/eric/Makefile @@ -33,7 +33,7 @@ OBJS := $(addprefix $(obj),$(COBJS)) SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) clean: rm -f $(SOBJS) $(OBJS) diff --git a/board/jse/Makefile b/board/jse/Makefile index 6be03ac54..fc71601e5 100644 --- a/board/jse/Makefile +++ b/board/jse/Makefile @@ -33,7 +33,7 @@ OBJS := $(addprefix $(obj),$(COBJS)) SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) clean: rm -f $(SOBJS) $(OBJS) diff --git a/board/ml2/Makefile b/board/ml2/Makefile index 2a9366656..59644dba6 100644 --- a/board/ml2/Makefile +++ b/board/ml2/Makefile @@ -33,7 +33,7 @@ OBJS := $(addprefix $(obj),$(COBJS)) SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) clean: rm -f $(SOBJS) $(OBJS) diff --git a/board/mpl/mip405/Makefile b/board/mpl/mip405/Makefile index 53bf84658..18a8d8656 100644 --- a/board/mpl/mip405/Makefile +++ b/board/mpl/mip405/Makefile @@ -38,7 +38,7 @@ OBJS := $(addprefix $(obj),$(COBJS)) SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) clean: rm -f $(SOBJS) $(OBJS) diff --git a/board/mpl/pip405/Makefile b/board/mpl/pip405/Makefile index 590c7da5b..774b59f84 100644 --- a/board/mpl/pip405/Makefile +++ b/board/mpl/pip405/Makefile @@ -41,7 +41,7 @@ OBJS := $(addprefix $(obj),$(COBJS)) SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) clean: rm -f $(SOBJS) $(OBJS) -- cgit v1.2.3 From b1245dd3c6409c743f6c2768d00e909a4c8cc4ea Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Tue, 27 Oct 2009 16:16:13 +0100 Subject: ppc4xx: Add custom linker script to board/*/config.mk These boards have special linker scripts right now. We can't use the common 4xx linker script here. So overrride the linker script (LDSCRIPT) in board/*/config.mk and choose the board specific version. Signed-off-by: Stefan Roese --- board/amirix/ap1000/config.mk | 3 +++ board/esd/dasa_sim/config.mk | 3 +++ board/ml2/config.mk | 3 +++ board/xilinx/ml300/config.mk | 3 +++ 4 files changed, 12 insertions(+) (limited to 'board') diff --git a/board/amirix/ap1000/config.mk b/board/amirix/ap1000/config.mk index c09783a6a..09c6efa5a 100644 --- a/board/amirix/ap1000/config.mk +++ b/board/amirix/ap1000/config.mk @@ -25,3 +25,6 @@ # like it's not in RAM. This is a bit of voodoo to allow it to be # run from RAM instead of Flash. TEXT_BASE = 0x08000000 + +# Use board specific linker script +LDSCRIPT := $(SRCTREE)/board/amirix/ap1000/u-boot.lds diff --git a/board/esd/dasa_sim/config.mk b/board/esd/dasa_sim/config.mk index ae855dc05..4fe3774ff 100644 --- a/board/esd/dasa_sim/config.mk +++ b/board/esd/dasa_sim/config.mk @@ -21,3 +21,6 @@ # MA 02111-1307 USA # TEXT_BASE = 0xFFFC0000 + +# Use board specific linker script +LDSCRIPT := $(SRCTREE)/board/esd/dasa_sim/u-boot.lds diff --git a/board/ml2/config.mk b/board/ml2/config.mk index 41118d552..5e0bdae91 100644 --- a/board/ml2/config.mk +++ b/board/ml2/config.mk @@ -27,3 +27,6 @@ #TEXT_BASE = 0xFFFE0000 TEXT_BASE = 0x18000000 + +# Use board specific linker script +LDSCRIPT := $(SRCTREE)/board/ml2/u-boot.lds diff --git a/board/xilinx/ml300/config.mk b/board/xilinx/ml300/config.mk index 57ddb2fd7..208a25ba1 100644 --- a/board/xilinx/ml300/config.mk +++ b/board/xilinx/ml300/config.mk @@ -27,3 +27,6 @@ #TEXT_BASE = 0xFFFE0000 TEXT_BASE = 0x04000000 + +# Use board specific linker script +LDSCRIPT := $(SRCTREE)/board/xilinx/ml300/u-boot.lds -- cgit v1.2.3 From 2cd95a25cb0ee8218b271d23d64fb3f719ac5390 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Tue, 27 Oct 2009 16:20:05 +0100 Subject: ppc4xx: Remove board specific linker scripts from most PPC4xx boards All these linker scripts can be removed since the new common ppc4xx linker script should be able to handle all of those boards. Please test and report problems. Thanks. Signed-off-by: Stefan Roese --- board/amcc/acadia/u-boot.lds | 134 ------------------------------ board/amcc/bamboo/u-boot.lds | 143 -------------------------------- board/amcc/bubinga/u-boot.lds | 134 ------------------------------ board/amcc/canyonlands/u-boot.lds | 141 ------------------------------- board/amcc/ebony/u-boot.lds | 141 ------------------------------- board/amcc/katmai/u-boot.lds | 138 ------------------------------- board/amcc/kilauea/u-boot.lds | 134 ------------------------------ board/amcc/luan/u-boot.lds | 141 ------------------------------- board/amcc/makalu/u-boot.lds | 134 ------------------------------ board/amcc/ocotea/u-boot.lds | 141 ------------------------------- board/amcc/redwood/u-boot.lds | 145 -------------------------------- board/amcc/sequoia/u-boot.lds | 142 ------------------------------- board/amcc/taihu/u-boot.lds | 134 ------------------------------ board/amcc/taishan/u-boot.lds | 141 ------------------------------- board/amcc/walnut/u-boot.lds | 135 ------------------------------ board/amcc/yosemite/u-boot.lds | 141 ------------------------------- board/amcc/yucca/u-boot.lds | 141 ------------------------------- board/cray/L1/u-boot.lds | 150 --------------------------------- board/csb272/u-boot.lds | 151 --------------------------------- board/csb472/u-boot.lds | 151 --------------------------------- board/dave/PPChameleonEVB/u-boot.lds | 153 ---------------------------------- board/eric/u-boot.lds | 150 --------------------------------- board/esd/adciop/u-boot.lds | 132 ----------------------------- board/esd/apc405/u-boot.lds | 132 ----------------------------- board/esd/ar405/u-boot.lds | 132 ----------------------------- board/esd/ash405/u-boot.lds | 131 ----------------------------- board/esd/canbt/u-boot.lds | 132 ----------------------------- board/esd/cms700/u-boot.lds | 132 ----------------------------- board/esd/cpci2dp/u-boot.lds | 132 ----------------------------- board/esd/cpci405/u-boot.lds | 132 ----------------------------- board/esd/cpciiser4/u-boot.lds | 132 ----------------------------- board/esd/dp405/u-boot.lds | 132 ----------------------------- board/esd/du405/u-boot.lds | 132 ----------------------------- board/esd/du440/u-boot.lds | 139 ------------------------------- board/esd/hh405/u-boot.lds | 132 ----------------------------- board/esd/hub405/u-boot.lds | 131 ----------------------------- board/esd/ocrtc/u-boot.lds | 147 --------------------------------- board/esd/pci405/u-boot.lds | 132 ----------------------------- board/esd/plu405/u-boot.lds | 131 ----------------------------- board/esd/pmc405/u-boot.lds | 131 ----------------------------- board/esd/pmc405de/u-boot.lds | 132 ----------------------------- board/esd/pmc440/u-boot.lds | 139 ------------------------------- board/esd/voh405/u-boot.lds | 132 ----------------------------- board/esd/vom405/u-boot.lds | 132 ----------------------------- board/esd/wuh405/u-boot.lds | 131 ----------------------------- board/exbitgen/u-boot.lds | 149 --------------------------------- board/g2000/u-boot.lds | 132 ----------------------------- board/gdsys/dlvision/u-boot.lds | 131 ----------------------------- board/gdsys/gdppc440etx/u-boot.lds | 141 ------------------------------- board/gdsys/intip/u-boot.lds | 143 -------------------------------- board/gdsys/neo/u-boot.lds | 129 ----------------------------- board/jse/u-boot.lds | 140 ------------------------------- board/korat/u-boot.lds | 142 ------------------------------- board/lwmon5/u-boot.lds | 142 ------------------------------- board/mpl/mip405/u-boot.lds | 154 ---------------------------------- board/mpl/pip405/u-boot.lds | 149 --------------------------------- board/netstal/hcu4/u-boot.lds | 137 ------------------------------ board/netstal/hcu5/u-boot.lds | 141 ------------------------------- board/netstal/mcu25/u-boot.lds | 137 ------------------------------ board/pcs440ep/u-boot.lds | 139 ------------------------------- board/prodrive/alpr/u-boot.lds | 141 ------------------------------- board/prodrive/p3p440/u-boot.lds | 141 ------------------------------- board/quad100hd/u-boot.lds | 131 ----------------------------- board/sandburst/karef/u-boot.lds | 156 ----------------------------------- board/sandburst/metrobox/u-boot.lds | 156 ----------------------------------- board/sbc405/u-boot.lds | 147 --------------------------------- board/w7o/u-boot.lds | 132 ----------------------------- board/xes/xpedite1000/u-boot.lds | 151 --------------------------------- board/zeus/u-boot.lds | 130 ----------------------------- 69 files changed, 9566 deletions(-) delete mode 100644 board/amcc/acadia/u-boot.lds delete mode 100644 board/amcc/bamboo/u-boot.lds delete mode 100644 board/amcc/bubinga/u-boot.lds delete mode 100644 board/amcc/canyonlands/u-boot.lds delete mode 100644 board/amcc/ebony/u-boot.lds delete mode 100644 board/amcc/katmai/u-boot.lds delete mode 100644 board/amcc/kilauea/u-boot.lds delete mode 100644 board/amcc/luan/u-boot.lds delete mode 100644 board/amcc/makalu/u-boot.lds delete mode 100644 board/amcc/ocotea/u-boot.lds delete mode 100644 board/amcc/redwood/u-boot.lds delete mode 100644 board/amcc/sequoia/u-boot.lds delete mode 100644 board/amcc/taihu/u-boot.lds delete mode 100644 board/amcc/taishan/u-boot.lds delete mode 100644 board/amcc/walnut/u-boot.lds delete mode 100644 board/amcc/yosemite/u-boot.lds delete mode 100644 board/amcc/yucca/u-boot.lds delete mode 100644 board/cray/L1/u-boot.lds delete mode 100644 board/csb272/u-boot.lds delete mode 100644 board/csb472/u-boot.lds delete mode 100644 board/dave/PPChameleonEVB/u-boot.lds delete mode 100644 board/eric/u-boot.lds delete mode 100644 board/esd/adciop/u-boot.lds delete mode 100644 board/esd/apc405/u-boot.lds delete mode 100644 board/esd/ar405/u-boot.lds delete mode 100644 board/esd/ash405/u-boot.lds delete mode 100644 board/esd/canbt/u-boot.lds delete mode 100644 board/esd/cms700/u-boot.lds delete mode 100644 board/esd/cpci2dp/u-boot.lds delete mode 100644 board/esd/cpci405/u-boot.lds delete mode 100644 board/esd/cpciiser4/u-boot.lds delete mode 100644 board/esd/dp405/u-boot.lds delete mode 100644 board/esd/du405/u-boot.lds delete mode 100644 board/esd/du440/u-boot.lds delete mode 100644 board/esd/hh405/u-boot.lds delete mode 100644 board/esd/hub405/u-boot.lds delete mode 100644 board/esd/ocrtc/u-boot.lds delete mode 100644 board/esd/pci405/u-boot.lds delete mode 100644 board/esd/plu405/u-boot.lds delete mode 100644 board/esd/pmc405/u-boot.lds delete mode 100644 board/esd/pmc405de/u-boot.lds delete mode 100644 board/esd/pmc440/u-boot.lds delete mode 100644 board/esd/voh405/u-boot.lds delete mode 100644 board/esd/vom405/u-boot.lds delete mode 100644 board/esd/wuh405/u-boot.lds delete mode 100644 board/exbitgen/u-boot.lds delete mode 100644 board/g2000/u-boot.lds delete mode 100644 board/gdsys/dlvision/u-boot.lds delete mode 100644 board/gdsys/gdppc440etx/u-boot.lds delete mode 100644 board/gdsys/intip/u-boot.lds delete mode 100644 board/gdsys/neo/u-boot.lds delete mode 100644 board/jse/u-boot.lds delete mode 100644 board/korat/u-boot.lds delete mode 100644 board/lwmon5/u-boot.lds delete mode 100644 board/mpl/mip405/u-boot.lds delete mode 100644 board/mpl/pip405/u-boot.lds delete mode 100644 board/netstal/hcu4/u-boot.lds delete mode 100644 board/netstal/hcu5/u-boot.lds delete mode 100644 board/netstal/mcu25/u-boot.lds delete mode 100644 board/pcs440ep/u-boot.lds delete mode 100644 board/prodrive/alpr/u-boot.lds delete mode 100644 board/prodrive/p3p440/u-boot.lds delete mode 100644 board/quad100hd/u-boot.lds delete mode 100644 board/sandburst/karef/u-boot.lds delete mode 100644 board/sandburst/metrobox/u-boot.lds delete mode 100644 board/sbc405/u-boot.lds delete mode 100644 board/w7o/u-boot.lds delete mode 100644 board/xes/xpedite1000/u-boot.lds delete mode 100644 board/zeus/u-boot.lds (limited to 'board') diff --git a/board/amcc/acadia/u-boot.lds b/board/amcc/acadia/u-boot.lds deleted file mode 100644 index d37200d8b..000000000 --- a/board/amcc/acadia/u-boot.lds +++ /dev/null @@ -1,134 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/amcc/bamboo/u-boot.lds b/board/amcc/bamboo/u-boot.lds deleted file mode 100644 index bcde534df..000000000 --- a/board/amcc/bamboo/u-boot.lds +++ /dev/null @@ -1,143 +0,0 @@ -/* - * (C) Copyright 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - .bootpg 0xFFFFF000 : - { - cpu/ppc4xx/start.o (.bootpg) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - board/amcc/bamboo/init.o (.text) - board/amcc/bamboo/bamboo.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - - _end = . ; - PROVIDE (end = .); -} diff --git a/board/amcc/bubinga/u-boot.lds b/board/amcc/bubinga/u-boot.lds deleted file mode 100644 index d37200d8b..000000000 --- a/board/amcc/bubinga/u-boot.lds +++ /dev/null @@ -1,134 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/amcc/canyonlands/u-boot.lds b/board/amcc/canyonlands/u-boot.lds deleted file mode 100644 index 22fb8b8d4..000000000 --- a/board/amcc/canyonlands/u-boot.lds +++ /dev/null @@ -1,141 +0,0 @@ -/* - * (C) Copyright 2008 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - .bootpg 0xFFFFF000 : - { - cpu/ppc4xx/start.o (.bootpg) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - board/amcc/canyonlands/init.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - - _end = . ; - PROVIDE (end = .); -} diff --git a/board/amcc/ebony/u-boot.lds b/board/amcc/ebony/u-boot.lds deleted file mode 100644 index 4cb2e6c92..000000000 --- a/board/amcc/ebony/u-boot.lds +++ /dev/null @@ -1,141 +0,0 @@ -/* - * (C) Copyright 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - .bootpg 0xFFFFF000 : - { - cpu/ppc4xx/start.o (.bootpg) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - board/amcc/ebony/init.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/amcc/katmai/u-boot.lds b/board/amcc/katmai/u-boot.lds deleted file mode 100644 index f2231c28e..000000000 --- a/board/amcc/katmai/u-boot.lds +++ /dev/null @@ -1,138 +0,0 @@ -/* - * (C) Copyright 2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - .bootpg 0xFFFFF000 : - { - cpu/ppc4xx/start.o (.bootpg) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - cpu/ppc4xx/start.o (.text) - board/amcc/katmai/init.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/amcc/kilauea/u-boot.lds b/board/amcc/kilauea/u-boot.lds deleted file mode 100644 index bebb2b236..000000000 --- a/board/amcc/kilauea/u-boot.lds +++ /dev/null @@ -1,134 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ -/* To compile successfully, uncomment the following section. - * To go in ram, remove the section. - * Added by SunHe. - */ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/amcc/luan/u-boot.lds b/board/amcc/luan/u-boot.lds deleted file mode 100644 index 12c5b60fc..000000000 --- a/board/amcc/luan/u-boot.lds +++ /dev/null @@ -1,141 +0,0 @@ -/* - * (C) Copyright 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - .bootpg 0xFFFFF000 : - { - cpu/ppc4xx/start.o (.bootpg) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - board/amcc/luan/init.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/amcc/makalu/u-boot.lds b/board/amcc/makalu/u-boot.lds deleted file mode 100644 index bebb2b236..000000000 --- a/board/amcc/makalu/u-boot.lds +++ /dev/null @@ -1,134 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ -/* To compile successfully, uncomment the following section. - * To go in ram, remove the section. - * Added by SunHe. - */ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/amcc/ocotea/u-boot.lds b/board/amcc/ocotea/u-boot.lds deleted file mode 100644 index b0b4c00fd..000000000 --- a/board/amcc/ocotea/u-boot.lds +++ /dev/null @@ -1,141 +0,0 @@ -/* - * (C) Copyright 2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - .bootpg 0xFFFFF000 : - { - cpu/ppc4xx/start.o (.bootpg) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - board/amcc/ocotea/init.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/amcc/redwood/u-boot.lds b/board/amcc/redwood/u-boot.lds deleted file mode 100644 index 7bda06eb0..000000000 --- a/board/amcc/redwood/u-boot.lds +++ /dev/null @@ -1,145 +0,0 @@ -/* - * (C) Copyright 2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - .bootpg 0xFFFFF000 : - { - cpu/ppc4xx/start.o (.bootpg) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - board/amcc/redwood/init.o (.text) - -/* . = env_offset;*/ -/* common/env_embedded.o(.text)*/ - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/amcc/sequoia/u-boot.lds b/board/amcc/sequoia/u-boot.lds deleted file mode 100644 index b9ec56bb2..000000000 --- a/board/amcc/sequoia/u-boot.lds +++ /dev/null @@ -1,142 +0,0 @@ -/* - * (C) Copyright 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - .bootpg 0xFFFFF000 : - { - cpu/ppc4xx/start.o (.bootpg) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - - ppcenv_assert = ASSERT(. < 0xFFFF8000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CONFIG_SYS_MONITOR_BASE, CONFIG_SYS_MONITOR_LEN and TEXT_BASE may need to be modified."); - - _end = . ; - PROVIDE (end = .); -} diff --git a/board/amcc/taihu/u-boot.lds b/board/amcc/taihu/u-boot.lds deleted file mode 100644 index d37200d8b..000000000 --- a/board/amcc/taihu/u-boot.lds +++ /dev/null @@ -1,134 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/amcc/taishan/u-boot.lds b/board/amcc/taishan/u-boot.lds deleted file mode 100644 index c043f69ee..000000000 --- a/board/amcc/taishan/u-boot.lds +++ /dev/null @@ -1,141 +0,0 @@ -/* - * (C) Copyright 2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - .bootpg 0xFFFFF000 : - { - cpu/ppc4xx/start.o (.bootpg) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - board/amcc/taishan/init.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/amcc/walnut/u-boot.lds b/board/amcc/walnut/u-boot.lds deleted file mode 100644 index d7a78570e..000000000 --- a/board/amcc/walnut/u-boot.lds +++ /dev/null @@ -1,135 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/amcc/yosemite/u-boot.lds b/board/amcc/yosemite/u-boot.lds deleted file mode 100644 index b8646d539..000000000 --- a/board/amcc/yosemite/u-boot.lds +++ /dev/null @@ -1,141 +0,0 @@ -/* - * (C) Copyright 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - .bootpg 0xFFFFF000 : - { - cpu/ppc4xx/start.o (.bootpg) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - board/amcc/yosemite/init.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/amcc/yucca/u-boot.lds b/board/amcc/yucca/u-boot.lds deleted file mode 100644 index 2d44c6478..000000000 --- a/board/amcc/yucca/u-boot.lds +++ /dev/null @@ -1,141 +0,0 @@ -/* - * (C) Copyright 2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - .bootpg 0xFFFFF000 : - { - cpu/ppc4xx/start.o (.bootpg) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - board/amcc/yucca/init.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/cray/L1/u-boot.lds b/board/cray/L1/u-boot.lds deleted file mode 100644 index bd80df610..000000000 --- a/board/cray/L1/u-boot.lds +++ /dev/null @@ -1,150 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - board/cray/L1/init.o (.text) - cpu/ppc4xx/traps.o (.text) - cpu/ppc4xx/interrupts.o (.text) - cpu/ppc4xx/4xx_uart.o (.text) - cpu/ppc4xx/cpu_init.o (.text) - cpu/ppc4xx/speed.o (.text) - drivers/net/4xx_enet.o (.text) - common/dlmalloc.o (.text) - lib_generic/crc32.o (.text) - lib_ppc/extable.o (.text) - lib_generic/zlib.o (.text) - -/*. = env_offset;*/ - common/env_embedded.o(.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/csb272/u-boot.lds b/board/csb272/u-boot.lds deleted file mode 100644 index b58ccc5f8..000000000 --- a/board/csb272/u-boot.lds +++ /dev/null @@ -1,151 +0,0 @@ -/* - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - board/csb272/init.o (.text) - cpu/ppc4xx/kgdb.o (.text) - cpu/ppc4xx/traps.o (.text) - cpu/ppc4xx/interrupts.o (.text) - cpu/ppc4xx/4xx_uart.o (.text) - cpu/ppc4xx/cpu_init.o (.text) - cpu/ppc4xx/speed.o (.text) - drivers/net/4xx_enet.o (.text) - common/dlmalloc.o (.text) - lib_generic/crc32.o (.text) - - lib_ppc/extable.o (.text) - lib_ppc/board.o (.text) - lib_generic/zlib.o (.text) -/* . = env_offset;*/ -/* common/env_embedded.o(.text)*/ - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/csb472/u-boot.lds b/board/csb472/u-boot.lds deleted file mode 100644 index ba37c1b79..000000000 --- a/board/csb472/u-boot.lds +++ /dev/null @@ -1,151 +0,0 @@ -/* - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - board/csb472/init.o (.text) - cpu/ppc4xx/kgdb.o (.text) - cpu/ppc4xx/traps.o (.text) - cpu/ppc4xx/interrupts.o (.text) - cpu/ppc4xx/4xx_uart.o (.text) - cpu/ppc4xx/cpu_init.o (.text) - cpu/ppc4xx/speed.o (.text) - drivers/net/4xx_enet.o (.text) - common/dlmalloc.o (.text) - lib_generic/crc32.o (.text) - - lib_ppc/extable.o (.text) - lib_ppc/board.o (.text) - lib_generic/zlib.o (.text) -/* . = env_offset;*/ -/* common/env_embedded.o(.text)*/ - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/dave/PPChameleonEVB/u-boot.lds b/board/dave/PPChameleonEVB/u-boot.lds deleted file mode 100644 index ee7f59ec8..000000000 --- a/board/dave/PPChameleonEVB/u-boot.lds +++ /dev/null @@ -1,153 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - cpu/ppc4xx/traps.o (.text) - cpu/ppc4xx/interrupts.o (.text) - cpu/ppc4xx/4xx_uart.o (.text) - cpu/ppc4xx/cpu_init.o (.text) - cpu/ppc4xx/speed.o (.text) - drivers/net/4xx_enet.o (.text) - common/dlmalloc.o (.text) - lib_generic/crc32.o (.text) - lib_ppc/extable.o (.text) - lib_generic/zlib.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - - ppcenv_assert = ASSERT(. < 0xFFFF8000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CONFIG_SYS_MONITOR_BASE, CONFIG_SYS_MONITOR_LEN and TEXT_BASE may need to be modified."); - . = 0xFFFF8000; - .ppcenv : - { - common/env_embedded.o(.ppcenv); - } - - _end = . ; - PROVIDE (end = .); -} diff --git a/board/eric/u-boot.lds b/board/eric/u-boot.lds deleted file mode 100644 index 261ccfbc1..000000000 --- a/board/eric/u-boot.lds +++ /dev/null @@ -1,150 +0,0 @@ -/* - * (C) Copyright 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - board/eric/init.o (.text) - cpu/ppc4xx/kgdb.o (.text) - cpu/ppc4xx/traps.o (.text) - cpu/ppc4xx/interrupts.o (.text) - cpu/ppc4xx/4xx_uart.o (.text) - cpu/ppc4xx/cpu_init.o (.text) - cpu/ppc4xx/speed.o (.text) - drivers/net/4xx_enet.o (.text) - common/dlmalloc.o (.text) - lib_generic/crc32.o (.text) - lib_ppc/extable.o (.text) - lib_generic/zlib.o (.text) - -/* . = env_offset;*/ - common/env_embedded.o(.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/esd/adciop/u-boot.lds b/board/esd/adciop/u-boot.lds deleted file mode 100644 index 9207fe0bf..000000000 --- a/board/esd/adciop/u-boot.lds +++ /dev/null @@ -1,132 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x0FFF) & 0xFFFFF000; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(4096); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(4096); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/esd/apc405/u-boot.lds b/board/esd/apc405/u-boot.lds deleted file mode 100644 index 0799275fd..000000000 --- a/board/esd/apc405/u-boot.lds +++ /dev/null @@ -1,132 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/esd/ar405/u-boot.lds b/board/esd/ar405/u-boot.lds deleted file mode 100644 index 2247109cb..000000000 --- a/board/esd/ar405/u-boot.lds +++ /dev/null @@ -1,132 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/esd/ash405/u-boot.lds b/board/esd/ash405/u-boot.lds deleted file mode 100644 index 285c901fe..000000000 --- a/board/esd/ash405/u-boot.lds +++ /dev/null @@ -1,131 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/esd/canbt/u-boot.lds b/board/esd/canbt/u-boot.lds deleted file mode 100644 index 2247109cb..000000000 --- a/board/esd/canbt/u-boot.lds +++ /dev/null @@ -1,132 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/esd/cms700/u-boot.lds b/board/esd/cms700/u-boot.lds deleted file mode 100644 index 0799275fd..000000000 --- a/board/esd/cms700/u-boot.lds +++ /dev/null @@ -1,132 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/esd/cpci2dp/u-boot.lds b/board/esd/cpci2dp/u-boot.lds deleted file mode 100644 index 0799275fd..000000000 --- a/board/esd/cpci2dp/u-boot.lds +++ /dev/null @@ -1,132 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/esd/cpci405/u-boot.lds b/board/esd/cpci405/u-boot.lds deleted file mode 100644 index 0799275fd..000000000 --- a/board/esd/cpci405/u-boot.lds +++ /dev/null @@ -1,132 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/esd/cpciiser4/u-boot.lds b/board/esd/cpciiser4/u-boot.lds deleted file mode 100644 index 0799275fd..000000000 --- a/board/esd/cpciiser4/u-boot.lds +++ /dev/null @@ -1,132 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/esd/dp405/u-boot.lds b/board/esd/dp405/u-boot.lds deleted file mode 100644 index 0799275fd..000000000 --- a/board/esd/dp405/u-boot.lds +++ /dev/null @@ -1,132 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/esd/du405/u-boot.lds b/board/esd/du405/u-boot.lds deleted file mode 100644 index 65ad2f23b..000000000 --- a/board/esd/du405/u-boot.lds +++ /dev/null @@ -1,132 +0,0 @@ -/* - * (C) Copyright 2000, 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/esd/du440/u-boot.lds b/board/esd/du440/u-boot.lds deleted file mode 100644 index 3b6c09687..000000000 --- a/board/esd/du440/u-boot.lds +++ /dev/null @@ -1,139 +0,0 @@ -/* - * (C) Copyright 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - .bootpg 0xFFFFF000 : - { - cpu/ppc4xx/start.o (.bootpg) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - - ppcenv_assert = ASSERT(. < 0xFFFF8000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CONFIG_SYS_MONITOR_BASE, CONFIG_SYS_MONITOR_LEN and TEXT_BASE may need to be modified."); - - _end = . ; - PROVIDE (end = .); -} diff --git a/board/esd/hh405/u-boot.lds b/board/esd/hh405/u-boot.lds deleted file mode 100644 index 0799275fd..000000000 --- a/board/esd/hh405/u-boot.lds +++ /dev/null @@ -1,132 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/esd/hub405/u-boot.lds b/board/esd/hub405/u-boot.lds deleted file mode 100644 index 285c901fe..000000000 --- a/board/esd/hub405/u-boot.lds +++ /dev/null @@ -1,131 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/esd/ocrtc/u-boot.lds b/board/esd/ocrtc/u-boot.lds deleted file mode 100644 index 34884b69b..000000000 --- a/board/esd/ocrtc/u-boot.lds +++ /dev/null @@ -1,147 +0,0 @@ -/* - * (C) Copyright 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - cpu/ppc4xx/traps.o (.text) - cpu/ppc4xx/interrupts.o (.text) - cpu/ppc4xx/4xx_uart.o (.text) - cpu/ppc4xx/cpu_init.o (.text) - cpu/ppc4xx/speed.o (.text) - common/dlmalloc.o (.text) - lib_generic/crc32.o (.text) - lib_ppc/extable.o (.text) - lib_generic/zlib.o (.text) - -/* . = env_offset;*/ -/* common/env_embedded.o(.text)*/ - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/esd/pci405/u-boot.lds b/board/esd/pci405/u-boot.lds deleted file mode 100644 index 0799275fd..000000000 --- a/board/esd/pci405/u-boot.lds +++ /dev/null @@ -1,132 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/esd/plu405/u-boot.lds b/board/esd/plu405/u-boot.lds deleted file mode 100644 index 285c901fe..000000000 --- a/board/esd/plu405/u-boot.lds +++ /dev/null @@ -1,131 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/esd/pmc405/u-boot.lds b/board/esd/pmc405/u-boot.lds deleted file mode 100644 index 178a755ef..000000000 --- a/board/esd/pmc405/u-boot.lds +++ /dev/null @@ -1,131 +0,0 @@ -/* - * (C) Copyright 2000, 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/esd/pmc405de/u-boot.lds b/board/esd/pmc405de/u-boot.lds deleted file mode 100644 index 0799275fd..000000000 --- a/board/esd/pmc405de/u-boot.lds +++ /dev/null @@ -1,132 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/esd/pmc440/u-boot.lds b/board/esd/pmc440/u-boot.lds deleted file mode 100644 index 3b6c09687..000000000 --- a/board/esd/pmc440/u-boot.lds +++ /dev/null @@ -1,139 +0,0 @@ -/* - * (C) Copyright 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - .bootpg 0xFFFFF000 : - { - cpu/ppc4xx/start.o (.bootpg) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - - ppcenv_assert = ASSERT(. < 0xFFFF8000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CONFIG_SYS_MONITOR_BASE, CONFIG_SYS_MONITOR_LEN and TEXT_BASE may need to be modified."); - - _end = . ; - PROVIDE (end = .); -} diff --git a/board/esd/voh405/u-boot.lds b/board/esd/voh405/u-boot.lds deleted file mode 100644 index 0799275fd..000000000 --- a/board/esd/voh405/u-boot.lds +++ /dev/null @@ -1,132 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/esd/vom405/u-boot.lds b/board/esd/vom405/u-boot.lds deleted file mode 100644 index 0799275fd..000000000 --- a/board/esd/vom405/u-boot.lds +++ /dev/null @@ -1,132 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/esd/wuh405/u-boot.lds b/board/esd/wuh405/u-boot.lds deleted file mode 100644 index 285c901fe..000000000 --- a/board/esd/wuh405/u-boot.lds +++ /dev/null @@ -1,131 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/exbitgen/u-boot.lds b/board/exbitgen/u-boot.lds deleted file mode 100644 index d2b28e11b..000000000 --- a/board/exbitgen/u-boot.lds +++ /dev/null @@ -1,149 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - board/exbitgen/init.o (.text) - cpu/ppc4xx/kgdb.o (.text) - cpu/ppc4xx/traps.o (.text) - cpu/ppc4xx/interrupts.o (.text) - cpu/ppc4xx/4xx_uart.o (.text) - cpu/ppc4xx/cpu_init.o (.text) - cpu/ppc4xx/speed.o (.text) - common/dlmalloc.o (.text) - lib_generic/crc32.o (.text) - lib_ppc/extable.o (.text) - lib_generic/zlib.o (.text) - -/* . = env_offset;*/ - common/env_embedded.o(.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - . = ALIGN(4); - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/g2000/u-boot.lds b/board/g2000/u-boot.lds deleted file mode 100644 index 0799275fd..000000000 --- a/board/g2000/u-boot.lds +++ /dev/null @@ -1,132 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/gdsys/dlvision/u-boot.lds b/board/gdsys/dlvision/u-boot.lds deleted file mode 100644 index 689c808b8..000000000 --- a/board/gdsys/dlvision/u-boot.lds +++ /dev/null @@ -1,131 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.rodata) - *(.rodata1) - *(.rodata.str1.4) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/gdsys/gdppc440etx/u-boot.lds b/board/gdsys/gdppc440etx/u-boot.lds deleted file mode 100644 index 6ab36ee85..000000000 --- a/board/gdsys/gdppc440etx/u-boot.lds +++ /dev/null @@ -1,141 +0,0 @@ -/* - * (C) Copyright 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - .bootpg 0xFFFFF000 : - { - cpu/ppc4xx/start.o (.bootpg) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - board/gdsys/gdppc440etx/init.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/gdsys/intip/u-boot.lds b/board/gdsys/intip/u-boot.lds deleted file mode 100644 index 624c4c1be..000000000 --- a/board/gdsys/intip/u-boot.lds +++ /dev/null @@ -1,143 +0,0 @@ -/* - * (C) Copyright 2008 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - .bootpg 0xFFFFF000 : - { - cpu/ppc4xx/start.o (.bootpg) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - board/gdsys/intip/init.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.rodata) - *(.rodata1) - *(.rodata.str1.4) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - - _end = . ; - PROVIDE (end = .); -} diff --git a/board/gdsys/neo/u-boot.lds b/board/gdsys/neo/u-boot.lds deleted file mode 100644 index 75202caf3..000000000 --- a/board/gdsys/neo/u-boot.lds +++ /dev/null @@ -1,129 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/jse/u-boot.lds b/board/jse/u-boot.lds deleted file mode 100644 index 6d0a21cdc..000000000 --- a/board/jse/u-boot.lds +++ /dev/null @@ -1,140 +0,0 @@ -/* - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : { - /* The start.o file includes the initial jump vector that - must be located in the beginning. It is the basic run- - time function that calls all other functions. */ - cpu/ppc4xx/start.o (.text) - - board/jse/init.o (.text) - cpu/ppc4xx/kgdb.o (.text) - -/* . = env_offset;*/ -/* common/env_embedded.o(.text)*/ - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/korat/u-boot.lds b/board/korat/u-boot.lds deleted file mode 100644 index b9ec56bb2..000000000 --- a/board/korat/u-boot.lds +++ /dev/null @@ -1,142 +0,0 @@ -/* - * (C) Copyright 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - .bootpg 0xFFFFF000 : - { - cpu/ppc4xx/start.o (.bootpg) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - - ppcenv_assert = ASSERT(. < 0xFFFF8000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CONFIG_SYS_MONITOR_BASE, CONFIG_SYS_MONITOR_LEN and TEXT_BASE may need to be modified."); - - _end = . ; - PROVIDE (end = .); -} diff --git a/board/lwmon5/u-boot.lds b/board/lwmon5/u-boot.lds deleted file mode 100644 index b9ec56bb2..000000000 --- a/board/lwmon5/u-boot.lds +++ /dev/null @@ -1,142 +0,0 @@ -/* - * (C) Copyright 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - .bootpg 0xFFFFF000 : - { - cpu/ppc4xx/start.o (.bootpg) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - - ppcenv_assert = ASSERT(. < 0xFFFF8000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CONFIG_SYS_MONITOR_BASE, CONFIG_SYS_MONITOR_LEN and TEXT_BASE may need to be modified."); - - _end = . ; - PROVIDE (end = .); -} diff --git a/board/mpl/mip405/u-boot.lds b/board/mpl/mip405/u-boot.lds deleted file mode 100644 index cc8bed071..000000000 --- a/board/mpl/mip405/u-boot.lds +++ /dev/null @@ -1,154 +0,0 @@ -/* - * (C) Copyright 2000, 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - .bootpg 0xFFFFF000 : - { - board/mpl/mip405/init.o (.bootpg) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - board/mpl/mip405/init.o (.text) - cpu/ppc4xx/kgdb.o (.text) - cpu/ppc4xx/traps.o (.text) - cpu/ppc4xx/interrupts.o (.text) - cpu/ppc4xx/4xx_uart.o (.text) - cpu/ppc4xx/cpu_init.o (.text) - cpu/ppc4xx/speed.o (.text) - drivers/net/4xx_enet.o (.text) - common/dlmalloc.o (.text) - lib_generic/crc32.o (.text) - lib_ppc/extable.o (.text) - lib_generic/zlib.o (.text) - -/* . = env_offset;*/ -/* common/env_embedded.o(.text)*/ - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/mpl/pip405/u-boot.lds b/board/mpl/pip405/u-boot.lds deleted file mode 100644 index 92290d8b3..000000000 --- a/board/mpl/pip405/u-boot.lds +++ /dev/null @@ -1,149 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - board/mpl/pip405/init.o (.text) - cpu/ppc4xx/kgdb.o (.text) - cpu/ppc4xx/traps.o (.text) - cpu/ppc4xx/interrupts.o (.text) - cpu/ppc4xx/4xx_uart.o (.text) - cpu/ppc4xx/cpu_init.o (.text) - cpu/ppc4xx/speed.o (.text) - common/dlmalloc.o (.text) - lib_generic/crc32.o (.text) - lib_ppc/extable.o (.text) - lib_generic/zlib.o (.text) - -/* . = env_offset;*/ -/* common/env_embedded.o(.text)*/ - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/netstal/hcu4/u-boot.lds b/board/netstal/hcu4/u-boot.lds deleted file mode 100644 index f748ec30b..000000000 --- a/board/netstal/hcu4/u-boot.lds +++ /dev/null @@ -1,137 +0,0 @@ -/* - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : { - /* The start.o file includes the initial jump vector that - must be located in the beginning. It is the basic run- - time function that calls all other functions. */ - cpu/ppc4xx/start.o (.text) - -/* . = env_offset;*/ -/* common/env_embedded.o(.text)*/ - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/netstal/hcu5/u-boot.lds b/board/netstal/hcu5/u-boot.lds deleted file mode 100644 index bdc6e705c..000000000 --- a/board/netstal/hcu5/u-boot.lds +++ /dev/null @@ -1,141 +0,0 @@ -/* - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) - -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - .bootpg 0xFFFFF000 : - { - cpu/ppc4xx/start.o (.bootpg) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - - ppcenv_assert = ASSERT(. < 0xFFFFB000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CONFIG_SYS_MONITOR_BASE, CONFIG_SYS_MONITOR_LEN and TEXT_BASE may need to be modified."); - - _end = . ; - PROVIDE (end = .); -} diff --git a/board/netstal/mcu25/u-boot.lds b/board/netstal/mcu25/u-boot.lds deleted file mode 100644 index 2cf3361c4..000000000 --- a/board/netstal/mcu25/u-boot.lds +++ /dev/null @@ -1,137 +0,0 @@ -/* - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : { - /* The start.o file includes the initial jump vector that - must be located in the beginning. It is the basic run- - time function that calls all other functions. */ - cpu/ppc4xx/start.o (.text) - -/* . = env_offset;*/ -/* common/env_embedded.o(.text)*/ - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/pcs440ep/u-boot.lds b/board/pcs440ep/u-boot.lds deleted file mode 100644 index 2f6109117..000000000 --- a/board/pcs440ep/u-boot.lds +++ /dev/null @@ -1,139 +0,0 @@ -/* - * (C) Copyright 2006 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - .bootpg 0xFFFFF000 : - { - cpu/ppc4xx/start.o (.bootpg) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - cpu/ppc4xx/start.o (.text) - board/pcs440ep/init.o (.text) - lib_generic/sha1.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2; - __fixup_entries = (. - _FIXUP_TABLE_) >> 2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - - _end = . ; - PROVIDE (end = .); -} diff --git a/board/prodrive/alpr/u-boot.lds b/board/prodrive/alpr/u-boot.lds deleted file mode 100644 index 6633f91c4..000000000 --- a/board/prodrive/alpr/u-boot.lds +++ /dev/null @@ -1,141 +0,0 @@ -/* - * (C) Copyright 2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - .bootpg 0xFFFFF000 : - { - cpu/ppc4xx/start.o (.bootpg) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - board/prodrive/alpr/init.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/prodrive/p3p440/u-boot.lds b/board/prodrive/p3p440/u-boot.lds deleted file mode 100644 index b1c2dfffe..000000000 --- a/board/prodrive/p3p440/u-boot.lds +++ /dev/null @@ -1,141 +0,0 @@ -/* - * (C) Copyright 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - .bootpg 0xFFFFF000 : - { - cpu/ppc4xx/start.o (.bootpg) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - board/prodrive/p3p440/init.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/quad100hd/u-boot.lds b/board/quad100hd/u-boot.lds deleted file mode 100644 index 4f359b72d..000000000 --- a/board/quad100hd/u-boot.lds +++ /dev/null @@ -1,131 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/sandburst/karef/u-boot.lds b/board/sandburst/karef/u-boot.lds deleted file mode 100644 index f22ece264..000000000 --- a/board/sandburst/karef/u-boot.lds +++ /dev/null @@ -1,156 +0,0 @@ -/* - * (C) Copyright 2005 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * Travis B. Sawyer, Sandburst Corporation, tsawyer@sandburst.com - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - .bootpg 0xFFFFF000 : - { - cpu/ppc4xx/start.o (.bootpg) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - board/sandburst/karef/init.o (.text) - cpu/ppc4xx/kgdb.o (.text) - cpu/ppc4xx/traps.o (.text) - cpu/ppc4xx/interrupts.o (.text) - cpu/ppc4xx/4xx_uart.o (.text) - cpu/ppc4xx/cpu_init.o (.text) - cpu/ppc4xx/speed.o (.text) - drivers/net/4xx_enet.o (.text) - common/dlmalloc.o (.text) - lib_generic/crc32.o (.text) - lib_ppc/extable.o (.text) - lib_generic/zlib.o (.text) - -/* . = env_offset;*/ -/* common/env_embedded.o(.text)*/ - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/sandburst/metrobox/u-boot.lds b/board/sandburst/metrobox/u-boot.lds deleted file mode 100644 index c5851f22f..000000000 --- a/board/sandburst/metrobox/u-boot.lds +++ /dev/null @@ -1,156 +0,0 @@ -/* - * (C) Copyright 2005 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * Travis B. Sawyer, Sandburst Corporation, tsawyer@sandburst.com - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - .bootpg 0xFFFFF000 : - { - cpu/ppc4xx/start.o (.bootpg) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - board/sandburst/metrobox/init.o (.text) - cpu/ppc4xx/kgdb.o (.text) - cpu/ppc4xx/traps.o (.text) - cpu/ppc4xx/interrupts.o (.text) - cpu/ppc4xx/4xx_uart.o (.text) - cpu/ppc4xx/cpu_init.o (.text) - cpu/ppc4xx/speed.o (.text) - drivers/net/4xx_enet.o (.text) - common/dlmalloc.o (.text) - lib_generic/crc32.o (.text) - lib_ppc/extable.o (.text) - lib_generic/zlib.o (.text) - -/* . = env_offset;*/ -/* common/env_embedded.o(.text)*/ - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/sbc405/u-boot.lds b/board/sbc405/u-boot.lds deleted file mode 100644 index 89edd67aa..000000000 --- a/board/sbc405/u-boot.lds +++ /dev/null @@ -1,147 +0,0 @@ -/* - * (C) Copyright 2000, 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - cpu/ppc4xx/traps.o (.text) - cpu/ppc4xx/interrupts.o (.text) - cpu/ppc4xx/4xx_uart.o (.text) - cpu/ppc4xx/cpu_init.o (.text) - cpu/ppc4xx/speed.o (.text) - drivers/net/4xx_enet.o (.text) - common/dlmalloc.o (.text) - lib_generic/crc32.o (.text) - lib_ppc/extable.o (.text) - lib_generic/zlib.o (.text) - -/* . = env_offset;*/ -/* common/env_embedded.o(.text)*/ - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/w7o/u-boot.lds b/board/w7o/u-boot.lds deleted file mode 100644 index d953fd4bd..000000000 --- a/board/w7o/u-boot.lds +++ /dev/null @@ -1,132 +0,0 @@ -/* - * (C) Copyright 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - cpu/ppc4xx/start.o (.text) - board/w7o/init.o (.text) - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/xes/xpedite1000/u-boot.lds b/board/xes/xpedite1000/u-boot.lds deleted file mode 100644 index 73f65d61b..000000000 --- a/board/xes/xpedite1000/u-boot.lds +++ /dev/null @@ -1,151 +0,0 @@ -/* - * (C) Copyright 2002-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - .bootpg 0xFFFFF000 : - { - cpu/ppc4xx/start.o (.bootpg) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - board/xes/xpedite1000/init.o (.text) - cpu/ppc4xx/kgdb.o (.text) - cpu/ppc4xx/traps.o (.text) - cpu/ppc4xx/interrupts.o (.text) - cpu/ppc4xx/4xx_uart.o (.text) - cpu/ppc4xx/cpu_init.o (.text) - cpu/ppc4xx/speed.o (.text) - common/dlmalloc.o (.text) - lib_generic/crc32.o (.text) - lib_ppc/extable.o (.text) - lib_generic/zlib.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/zeus/u-boot.lds b/board/zeus/u-boot.lds deleted file mode 100644 index f3ccd33e7..000000000 --- a/board/zeus/u-boot.lds +++ /dev/null @@ -1,130 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} -- cgit v1.2.3 From b0b867462c569e7accd6f78c942cbab028116ecf Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Thu, 29 Oct 2009 15:04:35 +0100 Subject: ppc4xx: Consolidate 4xx PCIe board specific configuration This patch consolidates the PPC4xx board specific PCIe configuration code. This way the duplicated code is removed. Boards can implement a special, non standard behaviour (e.g. number of PCIe slots, etc) by overriding the weak default functions. Signed-off-by: Stefan Roese --- board/amcc/canyonlands/canyonlands.c | 74 +------------- board/amcc/katmai/katmai.c | 74 +------------- board/amcc/kilauea/kilauea.c | 77 ++------------ board/amcc/makalu/makalu.c | 67 ------------ board/amcc/yucca/yucca.c | 191 ++++++----------------------------- cpu/ppc4xx/4xx_pcie.c | 123 ++++++++++++++++++++++ include/configs/yucca.h | 8 ++ 7 files changed, 172 insertions(+), 442 deletions(-) (limited to 'board') diff --git a/board/amcc/canyonlands/canyonlands.c b/board/amcc/canyonlands/canyonlands.c index 91fae1917..8ce6788d4 100644 --- a/board/amcc/canyonlands/canyonlands.c +++ b/board/amcc/canyonlands/canyonlands.c @@ -383,84 +383,16 @@ int is_pci_host(struct pci_controller *hose) return (1); } -static struct pci_controller pcie_hose[2] = {{0},{0}}; - -void pcie_setup_hoses(int busno) +int board_pcie_first(void) { - struct pci_controller *hose; - int i, bus; - int ret = 0; - char *env; - unsigned int delay; - int start; - - /* - * assume we're called after the PCIX hose is initialized, which takes - * bus ID 0 and therefore start numbering PCIe's from 1. - */ - bus = busno; - /* * Canyonlands with SATA enabled has only one PCIe slot * (2nd one). */ if (gd->board_type == BOARD_CANYONLANDS_SATA) - start = 1; - else - start = 0; - - for (i = start; i <= 1; i++) { + return 1; - if (is_end_point(i)) - ret = ppc4xx_init_pcie_endport(i); - else - ret = ppc4xx_init_pcie_rootport(i); - if (ret == -ENODEV) - continue; - if (ret) { - printf("PCIE%d: initialization as %s failed\n", i, - is_end_point(i) ? "endpoint" : "root-complex"); - continue; - } - - hose = &pcie_hose[i]; - hose->first_busno = bus; - hose->last_busno = bus; - hose->current_busno = bus; - - /* setup mem resource */ - pci_set_region(hose->regions + 0, - CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE, - CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE, - CONFIG_SYS_PCIE_MEMSIZE, - PCI_REGION_MEM); - hose->region_count = 1; - pci_register_hose(hose); - - if (is_end_point(i)) { - ppc4xx_setup_pcie_endpoint(hose, i); - /* - * Reson for no scanning is endpoint can not generate - * upstream configuration accesses. - */ - } else { - ppc4xx_setup_pcie_rootpoint(hose, i); - env = getenv ("pciscandelay"); - if (env != NULL) { - delay = simple_strtoul(env, NULL, 10); - if (delay > 5) - printf("Warning, expect noticable delay before " - "PCIe scan due to 'pciscandelay' value!\n"); - mdelay(delay * 1000); - } - - /* - * Config access can only go down stream - */ - hose->last_busno = pci_hose_scan(hose); - bus = hose->last_busno + 1; - } - } + return 0; } #endif /* CONFIG_PCI */ diff --git a/board/amcc/katmai/katmai.c b/board/amcc/katmai/katmai.c index 908f1a595..34ecd994d 100644 --- a/board/amcc/katmai/katmai.c +++ b/board/amcc/katmai/katmai.c @@ -351,7 +351,7 @@ int is_pci_host(struct pci_controller *hose) return 1; } -static int katmai_pcie_card_present(int port) +int board_pcie_card_present(int port) { u32 val; @@ -367,78 +367,6 @@ static int katmai_pcie_card_present(int port) return 0; } } - -static struct pci_controller pcie_hose[3] = {{0},{0},{0}}; - -void pcie_setup_hoses(int busno) -{ - struct pci_controller *hose; - int i, bus; - int ret = 0; - char *env; - unsigned int delay; - - /* - * assume we're called after the PCIX hose is initialized, which takes - * bus ID 0 and therefore start numbering PCIe's from 1. - */ - bus = busno; - for (i = 0; i <= 2; i++) { - /* Check for katmai card presence */ - if (!katmai_pcie_card_present(i)) - continue; - - if (is_end_point(i)) - ret = ppc4xx_init_pcie_endport(i); - else - ret = ppc4xx_init_pcie_rootport(i); - if (ret == -ENODEV) - continue; - if (ret) { - printf("PCIE%d: initialization as %s failed\n", i, - is_end_point(i) ? "endpoint" : "root-complex"); - continue; - } - - hose = &pcie_hose[i]; - hose->first_busno = bus; - hose->last_busno = bus; - hose->current_busno = bus; - - /* setup mem resource */ - pci_set_region(hose->regions + 0, - CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE, - CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE, - CONFIG_SYS_PCIE_MEMSIZE, - PCI_REGION_MEM); - hose->region_count = 1; - pci_register_hose(hose); - - if (is_end_point(i)) { - ppc4xx_setup_pcie_endpoint(hose, i); - /* - * Reson for no scanning is endpoint can not generate - * upstream configuration accesses. - */ - } else { - ppc4xx_setup_pcie_rootpoint(hose, i); - env = getenv ("pciscandelay"); - if (env != NULL) { - delay = simple_strtoul(env, NULL, 10); - if (delay > 5) - printf("Warning, expect noticable delay before " - "PCIe scan due to 'pciscandelay' value!\n"); - mdelay(delay * 1000); - } - - /* - * Config access can only go down stream - */ - hose->last_busno = pci_hose_scan(hose); - bus = hose->last_busno + 1; - } - } -} #endif /* defined(CONFIG_PCI) */ #ifdef CONFIG_POST diff --git a/board/amcc/kilauea/kilauea.c b/board/amcc/kilauea/kilauea.c index 5cd822a7f..c4f8a6496 100644 --- a/board/amcc/kilauea/kilauea.c +++ b/board/amcc/kilauea/kilauea.c @@ -252,15 +252,19 @@ int board_emac_count(void) return 2; } -static int board_pcie_count(void) +/* + * Override the weak default implementation and return the + * last PCIe slot number (max number - 1). + */ +int board_pcie_last(void) { /* * 405EXr only has one EMAC interface, 405EX has two */ if (is_405exr()) - return 1; + return 1 - 1; else - return 2; + return 2 - 1; } int checkboard (void) @@ -300,73 +304,6 @@ int pci_pre_init(struct pci_controller * hose ) } #endif /* defined(CONFIG_PCI) */ -#ifdef CONFIG_PCI -static struct pci_controller pcie_hose[2] = {{0},{0}}; - -void pcie_setup_hoses(int busno) -{ - struct pci_controller *hose; - int i, bus; - int ret = 0; - bus = busno; - char *env; - unsigned int delay; - - for (i = 0; i < board_pcie_count(); i++) { - - if (is_end_point(i)) - ret = ppc4xx_init_pcie_endport(i); - else - ret = ppc4xx_init_pcie_rootport(i); - if (ret == -ENODEV) - continue; - if (ret) { - printf("PCIE%d: initialization as %s failed\n", i, - is_end_point(i) ? "endpoint" : "root-complex"); - continue; - } - - hose = &pcie_hose[i]; - hose->first_busno = bus; - hose->last_busno = bus; - hose->current_busno = bus; - - /* setup mem resource */ - pci_set_region(hose->regions + 0, - CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE, - CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE, - CONFIG_SYS_PCIE_MEMSIZE, - PCI_REGION_MEM); - hose->region_count = 1; - pci_register_hose(hose); - - if (is_end_point(i)) { - ppc4xx_setup_pcie_endpoint(hose, i); - /* - * Reson for no scanning is endpoint can not generate - * upstream configuration accesses. - */ - } else { - ppc4xx_setup_pcie_rootpoint(hose, i); - env = getenv ("pciscandelay"); - if (env != NULL) { - delay = simple_strtoul(env, NULL, 10); - if (delay > 5) - printf("Warning, expect noticable delay before " - "PCIe scan due to 'pciscandelay' value!\n"); - mdelay(delay * 1000); - } - - /* - * Config access can only go down stream - */ - hose->last_busno = pci_hose_scan(hose); - bus = hose->last_busno + 1; - } - } -} -#endif - #if defined(CONFIG_POST) /* * Returns 1 if keys pressed to start the power-on long-running tests diff --git a/board/amcc/makalu/makalu.c b/board/amcc/makalu/makalu.c index d4277dda9..43b9bc6ba 100644 --- a/board/amcc/makalu/makalu.c +++ b/board/amcc/makalu/makalu.c @@ -256,73 +256,6 @@ int pci_pre_init(struct pci_controller * hose ) } #endif /* defined(CONFIG_PCI) */ -#ifdef CONFIG_PCI -static struct pci_controller pcie_hose[2] = {{0},{0}}; - -void pcie_setup_hoses(int busno) -{ - struct pci_controller *hose; - int i, bus; - int ret = 0; - bus = busno; - char *env; - unsigned int delay; - - for (i = 0; i < 2; i++) { - - if (is_end_point(i)) - ret = ppc4xx_init_pcie_endport(i); - else - ret = ppc4xx_init_pcie_rootport(i); - if (ret == -ENODEV) - continue; - if (ret) { - printf("PCIE%d: initialization as %s failed\n", i, - is_end_point(i) ? "endpoint" : "root-complex"); - continue; - } - - hose = &pcie_hose[i]; - hose->first_busno = bus; - hose->last_busno = bus; - hose->current_busno = bus; - - /* setup mem resource */ - pci_set_region(hose->regions + 0, - CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE, - CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE, - CONFIG_SYS_PCIE_MEMSIZE, - PCI_REGION_MEM); - hose->region_count = 1; - pci_register_hose(hose); - - if (is_end_point(i)) { - ppc4xx_setup_pcie_endpoint(hose, i); - /* - * Reson for no scanning is endpoint can not generate - * upstream configuration accesses. - */ - } else { - ppc4xx_setup_pcie_rootpoint(hose, i); - env = getenv ("pciscandelay"); - if (env != NULL) { - delay = simple_strtoul(env, NULL, 10); - if (delay > 5) - printf("Warning, expect noticable delay before " - "PCIe scan due to 'pciscandelay' value!\n"); - mdelay(delay * 1000); - } - - /* - * Config access can only go down stream - */ - hose->last_busno = pci_hose_scan(hose); - bus = hose->last_busno + 1; - } - } -} -#endif - #if defined(CONFIG_POST) /* * Returns 1 if keys pressed to start the power-on long-running tests diff --git a/board/amcc/yucca/yucca.c b/board/amcc/yucca/yucca.c index d8f4bcbb1..649315581 100644 --- a/board/amcc/yucca/yucca.c +++ b/board/amcc/yucca/yucca.c @@ -679,7 +679,7 @@ int is_pci_host(struct pci_controller *hose) return 1; } -static int yucca_pcie_card_present(int port) +int board_pcie_card_present(int port) { u16 reg; @@ -696,186 +696,55 @@ static int yucca_pcie_card_present(int port) } } -/* - * For the given slot, set rootpoint mode, send power to the slot, - * turn on the green LED and turn off the yellow LED, enable the clock - * and turn off reset. - */ -void yucca_setup_pcie_fpga_rootpoint(int port) -{ - u16 power, clock, green_led, yellow_led, reset_off, rootpoint, endpoint; - - switch(port) { - case 0: - rootpoint = FPGA_REG1C_PE0_ROOTPOINT; - endpoint = 0; - power = FPGA_REG1A_PE0_PWRON; - green_led = FPGA_REG1A_PE0_GLED; - clock = FPGA_REG1A_PE0_REFCLK_ENABLE; - yellow_led = FPGA_REG1A_PE0_YLED; - reset_off = FPGA_REG1C_PE0_PERST; - break; - case 1: - rootpoint = 0; - endpoint = FPGA_REG1C_PE1_ENDPOINT; - power = FPGA_REG1A_PE1_PWRON; - green_led = FPGA_REG1A_PE1_GLED; - clock = FPGA_REG1A_PE1_REFCLK_ENABLE; - yellow_led = FPGA_REG1A_PE1_YLED; - reset_off = FPGA_REG1C_PE1_PERST; - break; - case 2: - rootpoint = 0; - endpoint = FPGA_REG1C_PE2_ENDPOINT; - power = FPGA_REG1A_PE2_PWRON; - green_led = FPGA_REG1A_PE2_GLED; - clock = FPGA_REG1A_PE2_REFCLK_ENABLE; - yellow_led = FPGA_REG1A_PE2_YLED; - reset_off = FPGA_REG1C_PE2_PERST; - break; - - default: - return; - } - - out_be16((u16 *)FPGA_REG1A, - ~(power | clock | green_led) & - (yellow_led | in_be16((u16 *)FPGA_REG1A))); - - out_be16((u16 *)FPGA_REG1C, - ~(endpoint | reset_off) & - (rootpoint | in_be16((u16 *)FPGA_REG1C))); - /* - * Leave device in reset for a while after powering on the - * slot to give it a chance to initialize. - */ - udelay(250 * 1000); - - out_be16((u16 *)FPGA_REG1C, reset_off | in_be16((u16 *)FPGA_REG1C)); -} /* * For the given slot, set endpoint mode, send power to the slot, - * turn on the green LED and turn off the yellow LED, enable the clock - * .In end point mode reset bit is read only. + * turn on the green LED and turn off the yellow LED, enable the + * clock. In end point mode reset bit is read only. */ -void yucca_setup_pcie_fpga_endpoint(int port) +void board_pcie_setup_port(int port, int rootpoint) { - u16 power, clock, green_led, yellow_led, reset_off, rootpoint, endpoint; + u16 power, clock, green_led, yellow_led, + reset_off, rp, ep; - switch(port) { + switch (port) { case 0: - rootpoint = FPGA_REG1C_PE0_ROOTPOINT; - endpoint = 0; - power = FPGA_REG1A_PE0_PWRON; - green_led = FPGA_REG1A_PE0_GLED; - clock = FPGA_REG1A_PE0_REFCLK_ENABLE; - yellow_led = FPGA_REG1A_PE0_YLED; - reset_off = FPGA_REG1C_PE0_PERST; + rp = FPGA_REG1C_PE0_ROOTPOINT; + ep = 0; break; case 1: - rootpoint = 0; - endpoint = FPGA_REG1C_PE1_ENDPOINT; - power = FPGA_REG1A_PE1_PWRON; - green_led = FPGA_REG1A_PE1_GLED; - clock = FPGA_REG1A_PE1_REFCLK_ENABLE; - yellow_led = FPGA_REG1A_PE1_YLED; - reset_off = FPGA_REG1C_PE1_PERST; + rp = 0; + ep = FPGA_REG1C_PE1_ENDPOINT; break; case 2: - rootpoint = 0; - endpoint = FPGA_REG1C_PE2_ENDPOINT; - power = FPGA_REG1A_PE2_PWRON; - green_led = FPGA_REG1A_PE2_GLED; - clock = FPGA_REG1A_PE2_REFCLK_ENABLE; - yellow_led = FPGA_REG1A_PE2_YLED; - reset_off = FPGA_REG1C_PE2_PERST; + rp = 0; + ep = FPGA_REG1C_PE2_ENDPOINT; break; default: return; } - out_be16((u16 *)FPGA_REG1A, - ~(power | clock | green_led) & - (yellow_led | in_be16((u16 *)FPGA_REG1A))); + power = FPGA_REG1A_PWRON_ENCODE(port); + green_led = FPGA_REG1A_GLED_ENCODE(port); + clock = FPGA_REG1A_REFCLK_ENCODE(port); + yellow_led = FPGA_REG1A_YLED_ENCODE(port); + reset_off = FPGA_REG1C_PERST_ENCODE(port); - out_be16((u16 *)FPGA_REG1C, - ~(rootpoint | reset_off) & - (endpoint | in_be16((u16 *)FPGA_REG1C))); -} + out_be16((u16 *)FPGA_REG1A, ~(power | clock | green_led) & + (yellow_led | in_be16((u16 *)FPGA_REG1A))); -static struct pci_controller pcie_hose[3] = {{0},{0},{0}}; + out_be16((u16 *)FPGA_REG1C, ~(ep | reset_off) & + (rp | in_be16((u16 *)FPGA_REG1C))); -void pcie_setup_hoses(int busno) -{ - struct pci_controller *hose; - int i, bus; - int ret = 0; - char *env; - unsigned int delay; + if (rootpoint) { + /* + * Leave device in reset for a while after powering on the + * slot to give it a chance to initialize. + */ + udelay(250 * 1000); - /* - * assume we're called after the PCIX hose is initialized, which takes - * bus ID 0 and therefore start numbering PCIe's from 1. - */ - bus = busno; - for (i = 0; i <= 2; i++) { - /* Check for yucca card presence */ - if (!yucca_pcie_card_present(i)) - continue; - - if (is_end_point(i)) { - yucca_setup_pcie_fpga_endpoint(i); - ret = ppc4xx_init_pcie_endport(i); - } else { - yucca_setup_pcie_fpga_rootpoint(i); - ret = ppc4xx_init_pcie_rootport(i); - } - if (ret == -ENODEV) - continue; - if (ret) { - printf("PCIE%d: initialization as %s failed\n", i, - is_end_point(i) ? "endpoint" : "root-complex"); - continue; - } - - hose = &pcie_hose[i]; - hose->first_busno = bus; - hose->last_busno = bus; - hose->current_busno = bus; - - /* setup mem resource */ - pci_set_region(hose->regions + 0, - CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE, - CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE, - CONFIG_SYS_PCIE_MEMSIZE, - PCI_REGION_MEM); - hose->region_count = 1; - pci_register_hose(hose); - - if (is_end_point(i)) { - ppc4xx_setup_pcie_endpoint(hose, i); - /* - * Reson for no scanning is endpoint can not generate - * upstream configuration accesses. - */ - } else { - ppc4xx_setup_pcie_rootpoint(hose, i); - env = getenv("pciscandelay"); - if (env != NULL) { - delay = simple_strtoul(env, NULL, 10); - if (delay > 5) - printf("Warning, expect noticable delay before " - "PCIe scan due to 'pciscandelay' value!\n"); - mdelay(delay * 1000); - } - - /* - * Config access can only go down stream - */ - hose->last_busno = pci_hose_scan(hose); - bus = hose->last_busno + 1; - } + out_be16((u16 *)FPGA_REG1C, + reset_off | in_be16((u16 *)FPGA_REG1C)); } } #endif /* defined(CONFIG_PCI) */ diff --git a/cpu/ppc4xx/4xx_pcie.c b/cpu/ppc4xx/4xx_pcie.c index 19d2c7dd2..c4d9cfed8 100644 --- a/cpu/ppc4xx/4xx_pcie.c +++ b/cpu/ppc4xx/4xx_pcie.c @@ -48,6 +48,129 @@ enum { LNKW_X8 = 0x8 }; +#if 1 // test-only +int board_pcie_first(void); +int board_pcie_last(void); +static struct pci_controller pcie_hose[CONFIG_SYS_PCIE_NR_PORTS]; + +/* + * Per default, all cards are present, so we need to check if the + * link comes up. + */ +int __board_pcie_card_present(int port) +{ + return 1; +} +int board_pcie_card_present(int port) + __attribute__((weak, alias("__board_pcie_card_present"))); + +/* + * Some boards have runtime detection of the first and last PCIe + * slot used, so let's provide weak default functions for the + * common version. + */ +int __board_pcie_first(void) +{ + return 0; +} +int board_pcie_first(void) + __attribute__((weak, alias("__board_pcie_first"))); + +int __board_pcie_last(void) +{ + return CONFIG_SYS_PCIE_NR_PORTS - 1; +} +int board_pcie_last(void) + __attribute__((weak, alias("__board_pcie_last"))); + +void __board_pcie_setup_port(int port, int rootpoint) +{ + /* noting in this weak default implementation */ +} +void board_pcie_setup_port(int port, int rootpoint) + __attribute__((weak, alias("__board_pcie_setup_port"))); + +void pcie_setup_hoses(int busno) +{ + struct pci_controller *hose; + int i, bus; + int ret = 0; + char *env; + unsigned int delay; + int first = board_pcie_first(); + int last = board_pcie_last(); + + /* + * Assume we're called after the PCI(X) hose(s) are initialized, + * which takes bus ID 0... and therefore start numbering PCIe's + * from the next number. + */ + bus = busno; + + for (i = first; i <= last; i++) { + /* + * Some boards (e.g. Katmai) can detects via hardware + * if a PCIe card is plugged, so let's check this. + */ + if (!board_pcie_card_present(i)) + continue; + + if (is_end_point(i)) { + board_pcie_setup_port(i, 0); + ret = ppc4xx_init_pcie_endport(i); + } else { + board_pcie_setup_port(i, 1); + ret = ppc4xx_init_pcie_rootport(i); + } + if (ret == -ENODEV) + continue; + if (ret) { + printf("PCIE%d: initialization as %s failed\n", i, + is_end_point(i) ? "endpoint" : "root-complex"); + continue; + } + + hose = &pcie_hose[i]; + hose->first_busno = bus; + hose->last_busno = bus; + hose->current_busno = bus; + + /* setup mem resource */ + pci_set_region(hose->regions + 0, + CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE, + CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE, + CONFIG_SYS_PCIE_MEMSIZE, + PCI_REGION_MEM); + hose->region_count = 1; + pci_register_hose(hose); + + if (is_end_point(i)) { + ppc4xx_setup_pcie_endpoint(hose, i); + /* + * Reson for no scanning is endpoint can not generate + * upstream configuration accesses. + */ + } else { + ppc4xx_setup_pcie_rootpoint(hose, i); + env = getenv ("pciscandelay"); + if (env != NULL) { + delay = simple_strtoul(env, NULL, 10); + if (delay > 5) + printf("Warning, expect noticable delay before " + "PCIe scan due to 'pciscandelay' value!\n"); + mdelay(delay * 1000); + } + + /* + * Config access can only go down stream + */ + hose->last_busno = pci_hose_scan(hose); + bus = hose->last_busno + 1; + } + } +} +#endif + static int validate_endpoint(struct pci_controller *hose) { if (hose->cfg_data == (u8 *)CONFIG_SYS_PCIE0_CFGBASE) diff --git a/include/configs/yucca.h b/include/configs/yucca.h index b165bd7a1..42f880785 100644 --- a/include/configs/yucca.h +++ b/include/configs/yucca.h @@ -389,6 +389,11 @@ #define FPGA_REG1A_PE_SELSOURCE_0 0x0002 #define FPGA_REG1A_PE_SELSOURCE_1 0x0001 +#define FPGA_REG1A_GLED_ENCODE(n) (FPGA_REG1A_PE0_GLED >> (n)) +#define FPGA_REG1A_YLED_ENCODE(n) (FPGA_REG1A_PE0_YLED >> (n)) +#define FPGA_REG1A_PWRON_ENCODE(n) (FPGA_REG1A_PE0_PWRON >> (n)) +#define FPGA_REG1A_REFCLK_ENCODE(n) (FPGA_REG1A_PE0_REFCLK_ENABLE >> (n)) + /*----------------------------------------------------------------------------+ | PCIe Miscellaneous +----------------------------------------------------------------------------*/ @@ -407,6 +412,9 @@ #define FPGA_REG1C_PE1_PERST 0x0008 #define FPGA_REG1C_PE2_PERST 0x0004 +#define FPGA_REG1C_ROOTPOINT_ENCODE(n) (FPGA_REG1C_PE0_ROOTPOINT >> (n)) +#define FPGA_REG1C_PERST_ENCODE(n) (FPGA_REG1C_PE0_PERST >> (n)) + /*----------------------------------------------------------------------------+ | Defines +----------------------------------------------------------------------------*/ -- cgit v1.2.3 From 9a81c61249d8361ed57d81f496121f3eb9c0eee8 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Thu, 29 Oct 2009 16:54:52 +0100 Subject: ppc4xx: Remove duplicated is_pci_host() functions This patch introduces a weak default function for is_pci_host(), returning 1. This is the default behaviour, since most boards only implement PCI host functionality. This weak default can be overridden by a board specific version if needed. Signed-off-by: Stefan Roese --- board/amcc/bamboo/bamboo.c | 23 ----------------------- board/amcc/canyonlands/canyonlands.c | 19 ------------------- board/amcc/ebony/ebony.c | 23 ----------------------- board/amcc/katmai/katmai.c | 21 --------------------- board/amcc/luan/luan.c | 23 ----------------------- board/amcc/ocotea/ocotea.c | 24 ------------------------ board/amcc/sequoia/sequoia.c | 21 --------------------- board/amcc/taishan/taishan.c | 23 ----------------------- board/amcc/yosemite/yosemite.c | 23 ----------------------- board/amcc/yucca/yucca.c | 21 --------------------- board/esd/du440/du440.c | 21 --------------------- board/esd/pmc440/pmc440.c | 2 +- board/gdsys/gdppc440etx/gdppc440etx.c | 22 ---------------------- board/gdsys/intip/intip.c | 21 --------------------- board/korat/korat.c | 21 --------------------- board/lwmon5/lwmon5.c | 23 ----------------------- board/netstal/hcu5/hcu5.c | 19 ------------------- board/pcs440ep/pcs440ep.c | 23 ----------------------- board/prodrive/alpr/alpr.c | 2 +- board/prodrive/p3p440/p3p440.c | 2 +- board/sandburst/common/sb_common.c | 13 ------------- board/xes/xpedite1000/xpedite1000.c | 2 ++ cpu/ppc4xx/4xx_pci.c | 20 ++++++++++++++++++++ 23 files changed, 25 insertions(+), 387 deletions(-) (limited to 'board') diff --git a/board/amcc/bamboo/bamboo.c b/board/amcc/bamboo/bamboo.c index 2598f2cf4..313f9f36a 100644 --- a/board/amcc/bamboo/bamboo.c +++ b/board/amcc/bamboo/bamboo.c @@ -603,29 +603,6 @@ void pci_master_init(struct pci_controller *hose) } #endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) */ -/************************************************************************* - * is_pci_host - * - * This routine is called to determine if a pci scan should be - * performed. With various hardware environments (especially cPCI and - * PPMC) it's insufficient to depend on the state of the arbiter enable - * bit in the strap register, or generic host/adapter assumptions. - * - * Rather than hard-code a bad assumption in the general 440 code, the - * 440 pci code requires the board to decide at runtime. - * - * Return 0 for adapter mode, non-zero for host (monarch) mode. - * - * - ************************************************************************/ -#if defined(CONFIG_PCI) -int is_pci_host(struct pci_controller *hose) -{ - /* Bamboo is always configured as host. */ - return (1); -} -#endif /* defined(CONFIG_PCI) */ - /*----------------------------------------------------------------------------+ | is_powerpc440ep_pass1. +----------------------------------------------------------------------------*/ diff --git a/board/amcc/canyonlands/canyonlands.c b/board/amcc/canyonlands/canyonlands.c index 8ce6788d4..9a8ca8ece 100644 --- a/board/amcc/canyonlands/canyonlands.c +++ b/board/amcc/canyonlands/canyonlands.c @@ -364,25 +364,6 @@ void pci_target_init(struct pci_controller * hose ) #endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ #if defined(CONFIG_PCI) -/* - * is_pci_host - * - * This routine is called to determine if a pci scan should be - * performed. With various hardware environments (especially cPCI and - * PPMC) it's insufficient to depend on the state of the arbiter enable - * bit in the strap register, or generic host/adapter assumptions. - * - * Rather than hard-code a bad assumption in the general 440 code, the - * 440 pci code requires the board to decide at runtime. - * - * Return 0 for adapter mode, non-zero for host (monarch) mode. - */ -int is_pci_host(struct pci_controller *hose) -{ - /* Board is always configured as host. */ - return (1); -} - int board_pcie_first(void) { /* diff --git a/board/amcc/ebony/ebony.c b/board/amcc/ebony/ebony.c index 0ca1accec..1524b5333 100644 --- a/board/amcc/ebony/ebony.c +++ b/board/amcc/ebony/ebony.c @@ -234,26 +234,3 @@ void pci_target_init(struct pci_controller *hose) out16r(PCIL0_CMD, in16r(PCIL0_CMD) | PCI_COMMAND_MEMORY); } #endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ - -/************************************************************************* - * is_pci_host - * - * This routine is called to determine if a pci scan should be - * performed. With various hardware environments (especially cPCI and - * PPMC) it's insufficient to depend on the state of the arbiter enable - * bit in the strap register, or generic host/adapter assumptions. - * - * Rather than hard-code a bad assumption in the general 440 code, the - * 440 pci code requires the board to decide at runtime. - * - * Return 0 for adapter mode, non-zero for host (monarch) mode. - * - * - ************************************************************************/ -#if defined(CONFIG_PCI) -int is_pci_host(struct pci_controller *hose) -{ - /* The ebony board is always configured as host. */ - return (1); -} -#endif /* defined(CONFIG_PCI) */ diff --git a/board/amcc/katmai/katmai.c b/board/amcc/katmai/katmai.c index 34ecd994d..f43e76448 100644 --- a/board/amcc/katmai/katmai.c +++ b/board/amcc/katmai/katmai.c @@ -330,27 +330,6 @@ void pci_target_init(struct pci_controller * hose ) #endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ #if defined(CONFIG_PCI) -/************************************************************************* - * is_pci_host - * - * This routine is called to determine if a pci scan should be - * performed. With various hardware environments (especially cPCI and - * PPMC) it's insufficient to depend on the state of the arbiter enable - * bit in the strap register, or generic host/adapter assumptions. - * - * Rather than hard-code a bad assumption in the general 440 code, the - * 440 pci code requires the board to decide at runtime. - * - * Return 0 for adapter mode, non-zero for host (monarch) mode. - * - * - ************************************************************************/ -int is_pci_host(struct pci_controller *hose) -{ - /* The katmai board is always configured as host. */ - return 1; -} - int board_pcie_card_present(int port) { u32 val; diff --git a/board/amcc/luan/luan.c b/board/amcc/luan/luan.c index a04f2af3b..94ba6437f 100644 --- a/board/amcc/luan/luan.c +++ b/board/amcc/luan/luan.c @@ -199,29 +199,6 @@ void pci_target_init(struct pci_controller *hose) #endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ -/************************************************************************* - * is_pci_host - * - * This routine is called to determine if a pci scan should be - * performed. With various hardware environments (especially cPCI and - * PPMC) it's insufficient to depend on the state of the arbiter enable - * bit in the strap register, or generic host/adapter assumptions. - * - * Rather than hard-code a bad assumption in the general 440 code, the - * 440 pci code requires the board to decide at runtime. - * - * Return 0 for adapter mode, non-zero for host (monarch) mode. - * - * - ************************************************************************/ -#if defined(CONFIG_PCI) -int is_pci_host(struct pci_controller *hose) -{ - return 1; -} -#endif /* defined(CONFIG_PCI) */ - - /************************************************************************* * hw_watchdog_reset * diff --git a/board/amcc/ocotea/ocotea.c b/board/amcc/ocotea/ocotea.c index 0aa317ec0..2f64764ee 100644 --- a/board/amcc/ocotea/ocotea.c +++ b/board/amcc/ocotea/ocotea.c @@ -347,30 +347,6 @@ void pci_target_init(struct pci_controller * hose ) #endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ -/************************************************************************* - * is_pci_host - * - * This routine is called to determine if a pci scan should be - * performed. With various hardware environments (especially cPCI and - * PPMC) it's insufficient to depend on the state of the arbiter enable - * bit in the strap register, or generic host/adapter assumptions. - * - * Rather than hard-code a bad assumption in the general 440 code, the - * 440 pci code requires the board to decide at runtime. - * - * Return 0 for adapter mode, non-zero for host (monarch) mode. - * - * - ************************************************************************/ -#if defined(CONFIG_PCI) -int is_pci_host(struct pci_controller *hose) -{ - /* The ocotea board is always configured as host. */ - return(1); -} -#endif /* defined(CONFIG_PCI) */ - - void fpga_init(void) { unsigned long group; diff --git a/board/amcc/sequoia/sequoia.c b/board/amcc/sequoia/sequoia.c index 00f640872..439382006 100644 --- a/board/amcc/sequoia/sequoia.c +++ b/board/amcc/sequoia/sequoia.c @@ -509,27 +509,6 @@ void pci_master_init(struct pci_controller *hose) } #endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) */ -/* - * is_pci_host - * - * This routine is called to determine if a pci scan should be - * performed. With various hardware environments (especially cPCI and - * PPMC) it's insufficient to depend on the state of the arbiter enable - * bit in the strap register, or generic host/adapter assumptions. - * - * Rather than hard-code a bad assumption in the general 440 code, the - * 440 pci code requires the board to decide at runtime. - * - * Return 0 for adapter mode, non-zero for host (monarch) mode. - */ -#if defined(CONFIG_PCI) -int is_pci_host(struct pci_controller *hose) -{ - /* Cactus is always configured as host. */ - return (1); -} -#endif /* defined(CONFIG_PCI) */ - #if defined(CONFIG_POST) /* * Returns 1 if keys pressed to start the power-on long-running tests diff --git a/board/amcc/taishan/taishan.c b/board/amcc/taishan/taishan.c index 0c20faf9a..81e8fe14a 100644 --- a/board/amcc/taishan/taishan.c +++ b/board/amcc/taishan/taishan.c @@ -279,29 +279,6 @@ void pci_target_init(struct pci_controller * hose ) } #endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ -/************************************************************************* - * is_pci_host - * - * This routine is called to determine if a pci scan should be - * performed. With various hardware environments (especially cPCI and - * PPMC) it's insufficient to depend on the state of the arbiter enable - * bit in the strap register, or generic host/adapter assumptions. - * - * Rather than hard-code a bad assumption in the general 440 code, the - * 440 pci code requires the board to decide at runtime. - * - * Return 0 for adapter mode, non-zero for host (monarch) mode. - * - * - ************************************************************************/ -#if defined(CONFIG_PCI) -int is_pci_host(struct pci_controller *hose) -{ - /* The ocotea board is always configured as host. */ - return(1); -} -#endif /* defined(CONFIG_PCI) */ - #ifdef CONFIG_POST /* * Returns 1 if keys pressed to start the power-on long-running tests diff --git a/board/amcc/yosemite/yosemite.c b/board/amcc/yosemite/yosemite.c index ccbeb0e7a..e416eeb16 100644 --- a/board/amcc/yosemite/yosemite.c +++ b/board/amcc/yosemite/yosemite.c @@ -489,29 +489,6 @@ void pci_master_init(struct pci_controller *hose) } #endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) */ -/************************************************************************* - * is_pci_host - * - * This routine is called to determine if a pci scan should be - * performed. With various hardware environments (especially cPCI and - * PPMC) it's insufficient to depend on the state of the arbiter enable - * bit in the strap register, or generic host/adapter assumptions. - * - * Rather than hard-code a bad assumption in the general 440 code, the - * 440 pci code requires the board to decide at runtime. - * - * Return 0 for adapter mode, non-zero for host (monarch) mode. - * - * - ************************************************************************/ -#if defined(CONFIG_PCI) -int is_pci_host(struct pci_controller *hose) -{ - /* Bamboo is always configured as host. */ - return (1); -} -#endif /* defined(CONFIG_PCI) */ - /************************************************************************* * hw_watchdog_reset * diff --git a/board/amcc/yucca/yucca.c b/board/amcc/yucca/yucca.c index 649315581..7315033dc 100644 --- a/board/amcc/yucca/yucca.c +++ b/board/amcc/yucca/yucca.c @@ -658,27 +658,6 @@ void pci_target_init(struct pci_controller * hose ) #endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ #if defined(CONFIG_PCI) -/************************************************************************* - * is_pci_host - * - * This routine is called to determine if a pci scan should be - * performed. With various hardware environments (especially cPCI and - * PPMC) it's insufficient to depend on the state of the arbiter enable - * bit in the strap register, or generic host/adapter assumptions. - * - * Rather than hard-code a bad assumption in the general 440 code, the - * 440 pci code requires the board to decide at runtime. - * - * Return 0 for adapter mode, non-zero for host (monarch) mode. - * - * - ************************************************************************/ -int is_pci_host(struct pci_controller *hose) -{ - /* The yucca board is always configured as host. */ - return 1; -} - int board_pcie_card_present(int port) { u16 reg; diff --git a/board/esd/du440/du440.c b/board/esd/du440/du440.c index d0e52cbab..8f9f9500e 100644 --- a/board/esd/du440/du440.c +++ b/board/esd/du440/du440.c @@ -498,27 +498,6 @@ void pci_master_init(struct pci_controller *hose) } #endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) */ -/* - * is_pci_host - * - * This routine is called to determine if a pci scan should be - * performed. With various hardware environments (especially cPCI and - * PPMC) it's insufficient to depend on the state of the arbiter enable - * bit in the strap register, or generic host/adapter assumptions. - * - * Rather than hard-code a bad assumption in the general 440 code, the - * 440 pci code requires the board to decide at runtime. - * - * Return 0 for adapter mode, non-zero for host (monarch) mode. - */ -#if defined(CONFIG_PCI) -int is_pci_host(struct pci_controller *hose) -{ - /* always configured as host. */ - return (1); -} -#endif /* defined(CONFIG_PCI) */ - int last_stage_init(void) { int e, i; diff --git a/board/esd/pmc440/pmc440.c b/board/esd/pmc440/pmc440.c index ec9255243..10901b400 100644 --- a/board/esd/pmc440/pmc440.c +++ b/board/esd/pmc440/pmc440.c @@ -712,7 +712,7 @@ static void wait_for_pci_ready(void) } /* - * is_pci_host + * Override weak is_pci_host() * * This routine is called to determine if a pci scan should be * performed. With various hardware environments (especially cPCI and diff --git a/board/gdsys/gdppc440etx/gdppc440etx.c b/board/gdsys/gdppc440etx/gdppc440etx.c index 90dbe52aa..92f5d822f 100644 --- a/board/gdsys/gdppc440etx/gdppc440etx.c +++ b/board/gdsys/gdppc440etx/gdppc440etx.c @@ -299,25 +299,3 @@ void pci_master_init(struct pci_controller *hose) PCI_COMMAND_MEMORY); } #endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) */ - -/* - * is_pci_host - * - * This routine is called to determine if a pci scan should be - * performed. With various hardware environments (especially cPCI and - * PPMC) it's insufficient to depend on the state of the arbiter enable - * bit in the strap register, or generic host/adapter assumptions. - * - * Rather than hard-code a bad assumption in the general 440 code, the - * 440 pci code requires the board to decide at runtime. - * - * Return 0 for adapter mode, non-zero for host (monarch) mode. - * - * - */ -#if defined(CONFIG_PCI) -int is_pci_host(struct pci_controller *hose) -{ - return 1; -} -#endif /* defined(CONFIG_PCI) */ diff --git a/board/gdsys/intip/intip.c b/board/gdsys/intip/intip.c index b42e90853..49d245135 100644 --- a/board/gdsys/intip/intip.c +++ b/board/gdsys/intip/intip.c @@ -178,27 +178,6 @@ void pci_target_init(struct pci_controller *hose) } #endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ -#if defined(CONFIG_PCI) -/* - * is_pci_host - * - * This routine is called to determine if a pci scan should be - * performed. With various hardware environments (especially cPCI and - * PPMC) it's insufficient to depend on the state of the arbiter enable - * bit in the strap register, or generic host/adapter assumptions. - * - * Rather than hard-code a bad assumption in the general 440 code, the - * 440 pci code requires the board to decide at runtime. - * - * Return 0 for adapter mode, non-zero for host (monarch) mode. - */ -int is_pci_host(struct pci_controller *hose) -{ - /* Board is always configured as host. */ - return 1; -} -#endif /* CONFIG_PCI */ - int board_early_init_r(void) { /* diff --git a/board/korat/korat.c b/board/korat/korat.c index 8c674a209..b0e6a56a6 100644 --- a/board/korat/korat.c +++ b/board/korat/korat.c @@ -748,27 +748,6 @@ void pci_master_init(struct pci_controller *hose) } #endif -/* - * is_pci_host - * - * This routine is called to determine if a pci scan should be - * performed. With various hardware environments (especially cPCI and - * PPMC) it's insufficient to depend on the state of the arbiter enable - * bit in the strap register, or generic host/adapter assumptions. - * - * Rather than hard-code a bad assumption in the general 440 code, the - * 440 pci code requires the board to decide at runtime. - * - * Return 0 for adapter mode, non-zero for host (monarch) mode. - */ -#if defined(CONFIG_PCI) -int is_pci_host(struct pci_controller *hose) -{ - /* Korat is always configured as host. */ - return (1); -} -#endif /* defined(CONFIG_PCI) */ - #if defined(CONFIG_POST) /* * Returns 1 if keys pressed to start the power-on long-running tests diff --git a/board/lwmon5/lwmon5.c b/board/lwmon5/lwmon5.c index d36ea04e8..09ba2b933 100644 --- a/board/lwmon5/lwmon5.c +++ b/board/lwmon5/lwmon5.c @@ -412,29 +412,6 @@ void pci_master_init(struct pci_controller *hose) } #endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) */ -/************************************************************************* - * is_pci_host - * - * This routine is called to determine if a pci scan should be - * performed. With various hardware environments (especially cPCI and - * PPMC) it's insufficient to depend on the state of the arbiter enable - * bit in the strap register, or generic host/adapter assumptions. - * - * Rather than hard-code a bad assumption in the general 440 code, the - * 440 pci code requires the board to decide at runtime. - * - * Return 0 for adapter mode, non-zero for host (monarch) mode. - * - * - ************************************************************************/ -#if defined(CONFIG_PCI) -int is_pci_host(struct pci_controller *hose) -{ - /* Cactus is always configured as host. */ - return (1); -} -#endif /* defined(CONFIG_PCI) */ - void hw_watchdog_reset(void) { int val; diff --git a/board/netstal/hcu5/hcu5.c b/board/netstal/hcu5/hcu5.c index 946c3f3a4..7ffc26202 100644 --- a/board/netstal/hcu5/hcu5.c +++ b/board/netstal/hcu5/hcu5.c @@ -460,25 +460,6 @@ void pci_master_init(struct pci_controller *hose) temp_short | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY); } - -/* - * is_pci_host - * - * This routine is called to determine if a pci scan should be - * performed. With various hardware environments (especially cPCI and - * PPMC) it's insufficient to depend on the state of the arbiter enable - * bit in the strap register, or generic host/adapter assumptions. - * - * Rather than hard-code a bad assumption in the general 440 code, the - * 440 pci code requires the board to decide at runtime. - * - * Return 0 for adapter mode, non-zero for host (monarch) mode. - * - */ -int is_pci_host(struct pci_controller *hose) -{ - return 1; -} #endif /* defined(CONFIG_PCI) */ #if defined(CONFIG_POST) diff --git a/board/pcs440ep/pcs440ep.c b/board/pcs440ep/pcs440ep.c index b70827e0c..2155711d6 100644 --- a/board/pcs440ep/pcs440ep.c +++ b/board/pcs440ep/pcs440ep.c @@ -687,29 +687,6 @@ void pci_master_init(struct pci_controller *hose) } #endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) */ -/************************************************************************* - * is_pci_host - * - * This routine is called to determine if a pci scan should be - * performed. With various hardware environments (especially cPCI and - * PPMC) it's insufficient to depend on the state of the arbiter enable - * bit in the strap register, or generic host/adapter assumptions. - * - * Rather than hard-code a bad assumption in the general 440 code, the - * 440 pci code requires the board to decide at runtime. - * - * Return 0 for adapter mode, non-zero for host (monarch) mode. - * - * - ************************************************************************/ -#if defined(CONFIG_PCI) -int is_pci_host(struct pci_controller *hose) -{ - /* PCS440EP is always configured as host. */ - return (1); -} -#endif /* defined(CONFIG_PCI) */ - /************************************************************************* * hw_watchdog_reset * diff --git a/board/prodrive/alpr/alpr.c b/board/prodrive/alpr/alpr.c index 51335c4d9..e9e2bf3e0 100644 --- a/board/prodrive/alpr/alpr.c +++ b/board/prodrive/alpr/alpr.c @@ -218,7 +218,7 @@ void pci_target_init(struct pci_controller * hose ) #endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ /************************************************************************* - * is_pci_host + * Override weak is_pci_host() * * This routine is called to determine if a pci scan should be * performed. With various hardware environments (especially cPCI and diff --git a/board/prodrive/p3p440/p3p440.c b/board/prodrive/p3p440/p3p440.c index 9a0785276..e07400794 100644 --- a/board/prodrive/p3p440/p3p440.c +++ b/board/prodrive/p3p440/p3p440.c @@ -235,7 +235,7 @@ void pci_target_init(struct pci_controller *hose) #endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ /************************************************************************* - * is_pci_host + * Override weak is_pci_host() * * This routine is called to determine if a pci scan should be * performed. With various hardware environments (especially cPCI and diff --git a/board/sandburst/common/sb_common.c b/board/sandburst/common/sb_common.c index a484874ea..574908458 100644 --- a/board/sandburst/common/sb_common.c +++ b/board/sandburst/common/sb_common.c @@ -372,19 +372,6 @@ void pci_target_init(struct pci_controller * hose ) #endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ -/************************************************************************* - * is_pci_host - * - * - ************************************************************************/ -#if defined(CONFIG_PCI) -int is_pci_host(struct pci_controller *hose) -{ - /* The metrobox is always configured as host. */ - return(1); -} -#endif /* defined(CONFIG_PCI) */ - /************************************************************************* * board_get_enetaddr * diff --git a/board/xes/xpedite1000/xpedite1000.c b/board/xes/xpedite1000/xpedite1000.c index 04949bb2d..0c4cf9463 100644 --- a/board/xes/xpedite1000/xpedite1000.c +++ b/board/xes/xpedite1000/xpedite1000.c @@ -200,6 +200,8 @@ void pci_target_init(struct pci_controller * hose) #if defined(CONFIG_PCI) /* + * Override weak is_pci_host() + * * This routine is called to determine if a pci scan should be * performed. With various hardware environments (especially cPCI and * PPMC) it's insufficient to depend on the state of the arbiter enable diff --git a/cpu/ppc4xx/4xx_pci.c b/cpu/ppc4xx/4xx_pci.c index fa521f041..40017f4d6 100644 --- a/cpu/ppc4xx/4xx_pci.c +++ b/cpu/ppc4xx/4xx_pci.c @@ -478,6 +478,26 @@ void pci_init_board(void) static struct pci_controller ppc440_hose = {0}; +/* + * This routine is called to determine if a pci scan should be + * performed. With various hardware environments (especially cPCI and + * PPMC) it's insufficient to depend on the state of the arbiter enable + * bit in the strap register, or generic host/adapter assumptions. + * + * Rather than hard-code a bad assumption in the general 440 code, the + * 440 pci code requires the board to decide at runtime. + * + * Return 0 for adapter mode, non-zero for host (monarch) mode. + * + * Weak default implementation: "Normal" boards implement the PCI + * host functionality. This can be overridden for PCI adapter boards. + */ +int __is_pci_host(struct pci_controller *hose) +{ + return 1; +} +int is_pci_host(struct pci_controller *hose) + __attribute__((weak, alias("__is_pci_host"))); int pci_440_init (struct pci_controller *hose) { -- cgit v1.2.3 From 56f9b39d1f5d3c51e4b19792adb65bd93a8b6fcb Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Mon, 9 Nov 2009 13:01:19 +0100 Subject: ppc4xx: Fix NAND booting targets after 4xx linker script consolidation Somehow I missed the NAND booting targets in the 4xx linker script consolidation patchset. This patch fixes this issue. Signed-off-by: Stefan Roese --- board/amcc/acadia/config.mk | 4 ++++ board/amcc/bamboo/config.mk | 4 ++++ board/amcc/canyonlands/config.mk | 4 ++++ board/amcc/kilauea/config.mk | 4 ++++ board/amcc/sequoia/config.mk | 4 ++++ 5 files changed, 20 insertions(+) (limited to 'board') diff --git a/board/amcc/acadia/config.mk b/board/amcc/acadia/config.mk index 290415c9d..01db41c37 100644 --- a/board/amcc/acadia/config.mk +++ b/board/amcc/acadia/config.mk @@ -34,3 +34,7 @@ endif ifeq ($(debug),1) PLATFORM_CPPFLAGS += -DDEBUG endif + +ifdef CONFIG_NAND_U_BOOT +LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot-nand.lds +endif diff --git a/board/amcc/bamboo/config.mk b/board/amcc/bamboo/config.mk index a37636a0a..72b6bc0c0 100644 --- a/board/amcc/bamboo/config.mk +++ b/board/amcc/bamboo/config.mk @@ -36,3 +36,7 @@ endif ifeq ($(dbcr),1) PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000 endif + +ifdef CONFIG_NAND_U_BOOT +LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot-nand.lds +endif diff --git a/board/amcc/canyonlands/config.mk b/board/amcc/canyonlands/config.mk index 551a81755..7a5866550 100644 --- a/board/amcc/canyonlands/config.mk +++ b/board/amcc/canyonlands/config.mk @@ -39,3 +39,7 @@ endif ifeq ($(dbcr),1) PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000 endif + +ifdef CONFIG_NAND_U_BOOT +LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot-nand.lds +endif diff --git a/board/amcc/kilauea/config.mk b/board/amcc/kilauea/config.mk index f5800ebe8..b3d3f227f 100644 --- a/board/amcc/kilauea/config.mk +++ b/board/amcc/kilauea/config.mk @@ -30,3 +30,7 @@ endif ifeq ($(debug),1) PLATFORM_CPPFLAGS += -DDEBUG endif + +ifdef CONFIG_NAND_U_BOOT +LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot-nand.lds +endif diff --git a/board/amcc/sequoia/config.mk b/board/amcc/sequoia/config.mk index 6c748c914..b57e473e4 100644 --- a/board/amcc/sequoia/config.mk +++ b/board/amcc/sequoia/config.mk @@ -43,3 +43,7 @@ endif ifeq ($(dbcr),1) PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000 endif + +ifdef CONFIG_NAND_U_BOOT +LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot-nand.lds +endif -- cgit v1.2.3 From efe12bcec55c3d77b9ead56e62010d26b66781f3 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Mon, 9 Nov 2009 14:15:42 +0100 Subject: ppc4xx: Katmai: Add chip_config command This patch removes the Katmai "bootstrap" command and replaces it with the now common command "chip_config". Signed-off-by: Stefan Roese --- board/amcc/katmai/Makefile | 4 +- board/amcc/katmai/chip_config.c | 55 ++++++++++ board/amcc/katmai/cmd_katmai.c | 218 ---------------------------------------- include/configs/katmai.h | 9 +- 4 files changed, 66 insertions(+), 220 deletions(-) create mode 100644 board/amcc/katmai/chip_config.c delete mode 100644 board/amcc/katmai/cmd_katmai.c (limited to 'board') diff --git a/board/amcc/katmai/Makefile b/board/amcc/katmai/Makefile index 318016d2c..168bab5d2 100644 --- a/board/amcc/katmai/Makefile +++ b/board/amcc/katmai/Makefile @@ -25,9 +25,11 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o cmd_katmai.o +COBJS-y := $(BOARD).o +COBJS-$(CONFIG_CMD_CHIP_CONFIG) += chip_config.o SOBJS = init.o +COBJS := $(COBJS-y) SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) SOBJS := $(addprefix $(obj),$(SOBJS)) diff --git a/board/amcc/katmai/chip_config.c b/board/amcc/katmai/chip_config.c new file mode 100644 index 000000000..efaf3787c --- /dev/null +++ b/board/amcc/katmai/chip_config.c @@ -0,0 +1,55 @@ +/* + * (C) Copyright 2009 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#include +#include + +struct ppc4xx_config ppc4xx_config_val[] = { + { + "400-133","CPU: 400 PLB: 133 OPB: 66 EBC: 66", + { 0x86, 0x78, 0xc2, 0xc6, 0x05, 0xa5, 0x04, 0xe1 } + }, + { + "500-166","CPU: 500 PLB: 166 OPB: 83 EBC: 83", + { 0x87, 0x78, 0xf2, 0xc6, 0x05, 0xa5, 0x04, 0xe1 } + }, + { + "533-133","CPU: 533 PLB: 133 OPB: 66 EBC: 66", + { 0x87, 0x79, 0x02, 0x52, 0x05, 0xa5, 0x04, 0xe1 } + }, + { + "667-133","CPU: 667 PLB: 133 OPB: 66 EBC: 66", + { 0x87, 0x79, 0x42, 0x56, 0x05, 0xa5, 0x04, 0xe1 } + }, + { + "667-166","CPU: 667 PLB: 166 OPB: 83 EBC: 83", + { 0x87, 0x79, 0x42, 0x06, 0x05, 0xa5, 0x04, 0xe1 } + }, + { + "800-160","CPU: 800 PLB: 160 OPB: 53 EBC: 17", + { 0x86, 0x79, 0x81, 0xa7, 0x07, 0xa5, 0x04, 0xe1 } + }, +}; + +int ppc4xx_config_count = ARRAY_SIZE(ppc4xx_config_val); diff --git a/board/amcc/katmai/cmd_katmai.c b/board/amcc/katmai/cmd_katmai.c deleted file mode 100644 index 335d30c36..000000000 --- a/board/amcc/katmai/cmd_katmai.c +++ /dev/null @@ -1,218 +0,0 @@ -/* - * (C) Copyright 2007 - * Stefan Roese, DENX Software Engineering, sr@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - */ - -#include -#include -#include -#include - -#define CONFIG_STRESS /* enable 667 MHz CPU freq selection */ -#define DEBUG - -static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) -{ - uchar chip; - ulong data; - int nbytes; - extern char console_buffer[]; - - char sysClock[4]; - char cpuClock[4]; - char plbClock[4]; - char pcixClock[4]; - - if (argc < 3) { - cmd_usage(cmdtp); - return 1; - } - - if (strcmp(argv[2], "prom0") == 0) - chip = IIC0_BOOTPROM_ADDR; - else - chip = IIC0_ALT_BOOTPROM_ADDR; - - /* on Katmai SysClk is always 33MHz */ - strcpy(sysClock, "33"); - - do { -#ifdef CONFIG_STRESS - printf("enter cpu clock frequency 400, 500, 533, 667 MHz or quit to abort\n"); -#else - printf("enter cpu clock frequency 400, 500, 533 MHz or quit to abort\n"); -#endif - nbytes = readline (" ? "); - - if (strcmp(console_buffer, "quit") == 0) - return 0; - - if ((strcmp(console_buffer, "400") != 0) && - (strcmp(console_buffer, "500") != 0) && - (strcmp(console_buffer, "533") != 0) -#ifdef CONFIG_STRESS - && (strcmp(console_buffer, "667") != 0) -#endif - ) { - nbytes = 0; - } - - strcpy(cpuClock, console_buffer); - - } while (nbytes == 0); - - if (strcmp(cpuClock, "500") == 0) - strcpy(plbClock, "166"); - else if (strcmp(cpuClock, "533") == 0) - strcpy(plbClock, "133"); - else { - do { - if (strcmp(cpuClock, "400") == 0) - printf("enter plb clock frequency 100, 133 MHz or quit to abort\n"); - -#ifdef CONFIG_STRESS - if (strcmp(cpuClock, "667") == 0) - printf("enter plb clock frequency 133, 166 MHz or quit to abort\n"); - -#endif - nbytes = readline (" ? "); - - if (strcmp(console_buffer, "quit") == 0) - return 0; - - if (strcmp(cpuClock, "400") == 0) { - if ((strcmp(console_buffer, "100") != 0) && - (strcmp(console_buffer, "133") != 0)) - nbytes = 0; - } -#ifdef CONFIG_STRESS - if (strcmp(cpuClock, "667") == 0) { - if ((strcmp(console_buffer, "133") != 0) && - (strcmp(console_buffer, "166") != 0)) - nbytes = 0; - } -#endif - strcpy(plbClock, console_buffer); - - } while (nbytes == 0); - } - - do { - printf("enter Pci-X clock frequency 33, 66, 100 or 133 MHz or quit to abort\n"); - nbytes = readline (" ? "); - - if (strcmp(console_buffer, "quit") == 0) - return 0; - - if ((strcmp(console_buffer, "33") != 0) && - (strcmp(console_buffer, "66") != 0) && - (strcmp(console_buffer, "100") != 0) && - (strcmp(console_buffer, "133") != 0)) { - nbytes = 0; - } - strcpy(pcixClock, console_buffer); - - } while (nbytes == 0); - - printf("\nsys clk = %s MHz\n", sysClock); - printf("cpu clk = %s MHz\n", cpuClock); - printf("plb clk = %s MHz\n", plbClock); - printf("Pci-X clk = %s MHz\n", pcixClock); - - do { - printf("\npress [y] to write I2C bootstrap \n"); - printf("or [n] to abort. \n"); - printf("Don't forget to set board switches \n"); - printf("according to your choice before re-starting \n"); - printf("(refer to 440spe_uboot_kit_um_1_01.pdf) \n"); - - nbytes = readline (" ? "); - if (strcmp(console_buffer, "n") == 0) - return 0; - - } while (nbytes == 0); - - if (strcmp(sysClock, "33") == 0) { - if ((strcmp(cpuClock, "400") == 0) && - (strcmp(plbClock, "100") == 0)) - data = 0x8678c206; - - if ((strcmp(cpuClock, "400") == 0) && - (strcmp(plbClock, "133") == 0)) - data = 0x8678c2c6; - - if ((strcmp(cpuClock, "500") == 0)) - data = 0x8778f2c6; - - if ((strcmp(cpuClock, "533") == 0)) - data = 0x87790252; -#ifdef CONFIG_STRESS - if ((strcmp(cpuClock, "667") == 0) && - (strcmp(plbClock, "133") == 0)) - data = 0x87794256; - - if ((strcmp(cpuClock, "667") == 0) && - (strcmp(plbClock, "166") == 0)) - data = 0x87794206; -#endif - } -#ifdef DEBUG - printf(" pin strap0 to write in i2c = %lx\n", data); -#endif /* DEBUG */ - - if (i2c_write(chip, 0, 1, (uchar *)&data, 4) != 0) - printf("Error writing strap0 in %s\n", argv[2]); - - if (strcmp(pcixClock, "33") == 0) - data = 0x000007E1; - - if (strcmp(pcixClock, "66") == 0) - data = 0x000006E1; - - if (strcmp(pcixClock, "100") == 0) - data = 0x000005E1; - - if (strcmp(pcixClock, "133") == 0) - data = 0x000004E1; - - if (strcmp(plbClock, "166") == 0) -/* data |= 0x05950000; */ /* this set's DDR2 clock == PLB clock */ - data |= 0x05A50000; /* this set's DDR2 clock == 2 * PLB clock */ - else - data |= 0x05A50000; - -#ifdef DEBUG - printf(" pin strap1 to write in i2c = %lx\n", data); -#endif /* DEBUG */ - - udelay(1000); - if (i2c_write(chip, 4, 1, (uchar *)&data, 4) != 0) - printf("Error writing strap1 in %s\n", argv[2]); - - return 0; -} - -U_BOOT_CMD( - bootstrap, 3, 1, do_bootstrap, - "program the serial device strap", - "wrclk [prom0|prom1] - program the serial device strap" -); diff --git a/include/configs/katmai.h b/include/configs/katmai.h index 384026731..c013ac4b3 100644 --- a/include/configs/katmai.h +++ b/include/configs/katmai.h @@ -140,6 +140,11 @@ #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 +/* I2C bootstrap EEPROM */ +#define CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR 0x50 +#define CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET 0 +#define CONFIG_4xx_CONFIG_BLOCKSIZE 8 + /* I2C RTC */ #define CONFIG_RTC_M41T11 1 #define CONFIG_SYS_RTC_BUS_NUM 1 /* The I2C bus for RTC */ @@ -194,8 +199,10 @@ /* * Commands additional to the ones defined in amcc-common.h */ -#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_CHIP_CONFIG #define CONFIG_CMD_DATE +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT #define CONFIG_CMD_PCI #define CONFIG_CMD_SDRAM #define CONFIG_CMD_SNTP -- cgit v1.2.3 From 1095493a5d4c16f481a783f6f54d83ad0e07dfa0 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Thu, 12 Nov 2009 12:00:49 +0100 Subject: ppc4xx: Consolidate pci_target_init() function This patch removes the duplicted implementations of the pci_target_init() function by introducing a weak default function for it. This weak default has a different implementation for 440EP(x)/GR(x) PPC's. It can be overridden by a board specific version (e.g. PMC440, korat). Signed-off-by: Stefan Roese Acked-by: Matthias Fuchs --- board/amcc/bamboo/bamboo.c | 61 ------------------- board/amcc/canyonlands/canyonlands.c | 37 ------------ board/amcc/ebony/ebony.c | 39 ------------- board/amcc/katmai/katmai.c | 40 +------------ board/amcc/luan/luan.c | 40 ------------- board/amcc/ocotea/ocotea.c | 40 ------------- board/amcc/sequoia/sequoia.c | 65 --------------------- board/amcc/taishan/taishan.c | 39 ------------- board/amcc/yosemite/yosemite.c | 61 ------------------- board/amcc/yucca/yucca.c | 38 ------------ board/esd/du440/du440.c | 67 --------------------- board/esd/du440/du440.h | 3 - board/gdsys/gdppc440etx/gdppc440etx.c | 63 -------------------- board/gdsys/intip/intip.c | 37 ------------ board/korat/korat.c | 57 +----------------- board/lwmon5/lwmon5.c | 61 ------------------- board/netstal/hcu5/hcu5.c | 65 --------------------- board/pcs440ep/pcs440ep.c | 61 ------------------- board/prodrive/alpr/alpr.c | 39 ------------- board/prodrive/p3p440/p3p440.c | 39 ------------- board/sandburst/common/sb_common.c | 40 ------------- board/xes/xpedite1000/xpedite1000.c | 32 ---------- cpu/ppc4xx/4xx_pci.c | 106 ++++++++++++++++++++++++++++++++++ include/asm-ppc/4xx_pci.h | 2 + include/configs/DU440.h | 5 +- include/configs/PMC440.h | 2 + include/configs/korat.h | 1 + 27 files changed, 118 insertions(+), 1022 deletions(-) (limited to 'board') diff --git a/board/amcc/bamboo/bamboo.c b/board/amcc/bamboo/bamboo.c index 313f9f36a..3ffdac8bd 100644 --- a/board/amcc/bamboo/bamboo.c +++ b/board/amcc/bamboo/bamboo.c @@ -521,67 +521,6 @@ int pci_pre_init(struct pci_controller *hose) } #endif /* defined(CONFIG_PCI) */ -/************************************************************************* - * pci_target_init - * - * The bootstrap configuration provides default settings for the pci - * inbound map (PIM). But the bootstrap config choices are limited and - * may not be sufficient for a given board. - * - ************************************************************************/ -#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) -void pci_target_init(struct pci_controller *hose) -{ - /*--------------------------------------------------------------------------+ - * Set up Direct MMIO registers - *--------------------------------------------------------------------------*/ - /*--------------------------------------------------------------------------+ - | PowerPC440 EP PCI Master configuration. - | Map one 1Gig range of PLB/processor addresses to PCI memory space. - | PLB address 0xA0000000-0xDFFFFFFF ==> PCI address 0xA0000000-0xDFFFFFFF - | Use byte reversed out routines to handle endianess. - | Make this region non-prefetchable. - +--------------------------------------------------------------------------*/ - out32r(PCIL0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */ - out32r(PCIL0_PMM0LA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 Local Address */ - out32r(PCIL0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 PCI Low Address */ - out32r(PCIL0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */ - out32r(PCIL0_PMM0MA, 0xE0000001); /* 512M + No prefetching, and enable region */ - - out32r(PCIL0_PMM1MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */ - out32r(PCIL0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 Local Address */ - out32r(PCIL0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 PCI Low Address */ - out32r(PCIL0_PMM1PCIHA, 0x00000000); /* PMM0 PCI High Address */ - out32r(PCIL0_PMM1MA, 0xE0000001); /* 512M + No prefetching, and enable region */ - - out32r(PCIL0_PTM1MS, 0x00000001); /* Memory Size/Attribute */ - out32r(PCIL0_PTM1LA, 0); /* Local Addr. Reg */ - out32r(PCIL0_PTM2MS, 0); /* Memory Size/Attribute */ - out32r(PCIL0_PTM2LA, 0); /* Local Addr. Reg */ - - /*--------------------------------------------------------------------------+ - * Set up Configuration registers - *--------------------------------------------------------------------------*/ - - /* Program the board's subsystem id/vendor id */ - pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID, - CONFIG_SYS_PCI_SUBSYS_VENDORID); - pci_write_config_word(0, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_ID); - - /* Configure command register as bus master */ - pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER); - - /* 240nS PCI clock */ - pci_write_config_word(0, PCI_LATENCY_TIMER, 1); - - /* No error reporting */ - pci_write_config_word(0, PCI_ERREN, 0); - - pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101); - -} -#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ - /************************************************************************* * pci_master_init * diff --git a/board/amcc/canyonlands/canyonlands.c b/board/amcc/canyonlands/canyonlands.c index 9a8ca8ece..13a0daced 100644 --- a/board/amcc/canyonlands/canyonlands.c +++ b/board/amcc/canyonlands/canyonlands.c @@ -326,43 +326,6 @@ phys_size_t initdram(int board_type) } #endif -/* - * pci_target_init - * - * The bootstrap configuration provides default settings for the pci - * inbound map (PIM). But the bootstrap config choices are limited and - * may not be sufficient for a given board. - */ -#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) -void pci_target_init(struct pci_controller * hose ) -{ - /* - * Disable everything - */ - out_le32((void *)PCIL0_PIM0SA, 0); /* disable */ - out_le32((void *)PCIL0_PIM1SA, 0); /* disable */ - out_le32((void *)PCIL0_PIM2SA, 0); /* disable */ - out_le32((void *)PCIL0_EROMBA, 0); /* disable expansion rom */ - - /* - * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 - * strapping options to not support sizes such as 128/256 MB. - */ - out_le32((void *)PCIL0_PIM0LAL, CONFIG_SYS_SDRAM_BASE); - out_le32((void *)PCIL0_PIM0LAH, 0); - out_le32((void *)PCIL0_PIM0SA, ~(gd->ram_size - 1) | 1); - out_le32((void *)PCIL0_BAR0, 0); - - /* - * Program the board's subsystem id/vendor id - */ - out_le16((void *)PCIL0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID); - out_le16((void *)PCIL0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID); - - out_le16((void *)PCIL0_CMD, in16r(PCIL0_CMD) | PCI_COMMAND_MEMORY); -} -#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ - #if defined(CONFIG_PCI) int board_pcie_first(void) { diff --git a/board/amcc/ebony/ebony.c b/board/amcc/ebony/ebony.c index 1524b5333..e4d168f9d 100644 --- a/board/amcc/ebony/ebony.c +++ b/board/amcc/ebony/ebony.c @@ -195,42 +195,3 @@ int pci_pre_init(struct pci_controller *hose) return 1; } #endif /* defined(CONFIG_PCI) */ - -/************************************************************************* - * pci_target_init - * - * The bootstrap configuration provides default settings for the pci - * inbound map (PIM). But the bootstrap config choices are limited and - * may not be sufficient for a given board. - * - ************************************************************************/ -#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) -void pci_target_init(struct pci_controller *hose) -{ - /*--------------------------------------------------------------------------+ - * Disable everything - *--------------------------------------------------------------------------*/ - out32r(PCIL0_PIM0SA, 0); /* disable */ - out32r(PCIL0_PIM1SA, 0); /* disable */ - out32r(PCIL0_PIM2SA, 0); /* disable */ - out32r(PCIL0_EROMBA, 0); /* disable expansion rom */ - - /*--------------------------------------------------------------------------+ - * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping - * options to not support sizes such as 128/256 MB. - *--------------------------------------------------------------------------*/ - out32r(PCIL0_PIM0LAL, CONFIG_SYS_SDRAM_BASE); - out32r(PCIL0_PIM0LAH, 0); - out32r(PCIL0_PIM0SA, ~(gd->ram_size - 1) | 1); - - out32r(PCIL0_BAR0, 0); - - /*--------------------------------------------------------------------------+ - * Program the board's subsystem id/vendor id - *--------------------------------------------------------------------------*/ - out16r(PCIL0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID); - out16r(PCIL0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID); - - out16r(PCIL0_CMD, in16r(PCIL0_CMD) | PCI_COMMAND_MEMORY); -} -#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ diff --git a/board/amcc/katmai/katmai.c b/board/amcc/katmai/katmai.c index f43e76448..f0b48c0d3 100644 --- a/board/amcc/katmai/katmai.c +++ b/board/amcc/katmai/katmai.c @@ -1,5 +1,5 @@ /* - * (C) Copyright 2007-2008 + * (C) Copyright 2007-2009 * Stefan Roese, DENX Software Engineering, sr@denx.de. * * See file CREDITS for list of people who contributed to this @@ -291,44 +291,6 @@ int pci_pre_init(struct pci_controller * hose ) } #endif /* defined(CONFIG_PCI) */ -/************************************************************************* - * pci_target_init - * - * The bootstrap configuration provides default settings for the pci - * inbound map (PIM). But the bootstrap config choices are limited and - * may not be sufficient for a given board. - * - ************************************************************************/ -#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) -void pci_target_init(struct pci_controller * hose ) -{ - /*-------------------------------------------------------------------+ - * Disable everything - *-------------------------------------------------------------------*/ - out32r( PCIL0_PIM0SA, 0 ); /* disable */ - out32r( PCIL0_PIM1SA, 0 ); /* disable */ - out32r( PCIL0_PIM2SA, 0 ); /* disable */ - out32r( PCIL0_EROMBA, 0 ); /* disable expansion rom */ - - /*-------------------------------------------------------------------+ - * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 - * strapping options to not support sizes such as 128/256 MB. - *-------------------------------------------------------------------*/ - out32r( PCIL0_PIM0LAL, CONFIG_SYS_SDRAM_BASE ); - out32r( PCIL0_PIM0LAH, 0 ); - out32r( PCIL0_PIM0SA, ~(gd->ram_size - 1) | 1 ); - out32r( PCIL0_BAR0, 0 ); - - /*-------------------------------------------------------------------+ - * Program the board's subsystem id/vendor id - *-------------------------------------------------------------------*/ - out16r( PCIL0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID ); - out16r( PCIL0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID ); - - out16r( PCIL0_CMD, in16r(PCIL0_CMD) | PCI_COMMAND_MEMORY ); -} -#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ - #if defined(CONFIG_PCI) int board_pcie_card_present(int port) { diff --git a/board/amcc/luan/luan.c b/board/amcc/luan/luan.c index 94ba6437f..e0b297e70 100644 --- a/board/amcc/luan/luan.c +++ b/board/amcc/luan/luan.c @@ -159,46 +159,6 @@ int pci_pre_init( struct pci_controller *hose ) #endif /* defined(CONFIG_PCI) */ -/************************************************************************* - * pci_target_init - * - * The bootstrap configuration provides default settings for the pci - * inbound map (PIM). But the bootstrap config choices are limited and - * may not be sufficient for a given board. - * - ************************************************************************/ -#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) -void pci_target_init(struct pci_controller *hose) -{ - /*--------------------------------------------------------------------------+ - * Disable everything - *--------------------------------------------------------------------------*/ - out32r( PCIL0_PIM0SA, 0 ); /* disable */ - out32r( PCIL0_PIM1SA, 0 ); /* disable */ - out32r( PCIL0_PIM2SA, 0 ); /* disable */ - out32r( PCIL0_EROMBA, 0 ); /* disable expansion rom */ - - /*--------------------------------------------------------------------------+ - * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping - * options to not support sizes such as 128/256 MB. - *--------------------------------------------------------------------------*/ - out32r( PCIL0_PIM0LAL, CONFIG_SYS_SDRAM_BASE ); - out32r( PCIL0_PIM0LAH, 0 ); - out32r( PCIL0_PIM0SA, ~(gd->ram_size - 1) | 1 ); - - out32r( PCIL0_BAR0, 0 ); - - /*--------------------------------------------------------------------------+ - * Program the board's subsystem id/vendor id - *--------------------------------------------------------------------------*/ - out16r( PCIL0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID ); - out16r( PCIL0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID ); - - out16r( PCIL0_CMD, in16r(PCIL0_CMD) | PCI_COMMAND_MEMORY ); -} -#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ - - /************************************************************************* * hw_watchdog_reset * diff --git a/board/amcc/ocotea/ocotea.c b/board/amcc/ocotea/ocotea.c index 2f64764ee..b38f3cc40 100644 --- a/board/amcc/ocotea/ocotea.c +++ b/board/amcc/ocotea/ocotea.c @@ -307,46 +307,6 @@ int pci_pre_init(struct pci_controller * hose ) } #endif /* defined(CONFIG_PCI) */ -/************************************************************************* - * pci_target_init - * - * The bootstrap configuration provides default settings for the pci - * inbound map (PIM). But the bootstrap config choices are limited and - * may not be sufficient for a given board. - * - ************************************************************************/ -#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) -void pci_target_init(struct pci_controller * hose ) -{ - /*--------------------------------------------------------------------------+ - * Disable everything - *--------------------------------------------------------------------------*/ - out32r( PCIL0_PIM0SA, 0 ); /* disable */ - out32r( PCIL0_PIM1SA, 0 ); /* disable */ - out32r( PCIL0_PIM2SA, 0 ); /* disable */ - out32r( PCIL0_EROMBA, 0 ); /* disable expansion rom */ - - /*--------------------------------------------------------------------------+ - * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping - * options to not support sizes such as 128/256 MB. - *--------------------------------------------------------------------------*/ - out32r( PCIL0_PIM0LAL, CONFIG_SYS_SDRAM_BASE ); - out32r( PCIL0_PIM0LAH, 0 ); - out32r( PCIL0_PIM0SA, ~(gd->ram_size - 1) | 1 ); - - out32r( PCIL0_BAR0, 0 ); - - /*--------------------------------------------------------------------------+ - * Program the board's subsystem id/vendor id - *--------------------------------------------------------------------------*/ - out16r( PCIL0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID ); - out16r( PCIL0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID ); - - out16r( PCIL0_CMD, in16r(PCIL0_CMD) | PCI_COMMAND_MEMORY ); -} -#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ - - void fpga_init(void) { unsigned long group; diff --git a/board/amcc/sequoia/sequoia.c b/board/amcc/sequoia/sequoia.c index 439382006..b8ef4e763 100644 --- a/board/amcc/sequoia/sequoia.c +++ b/board/amcc/sequoia/sequoia.c @@ -427,71 +427,6 @@ int pci_pre_init(struct pci_controller *hose) } #endif /* defined(CONFIG_PCI) */ -/* - * pci_target_init - * - * The bootstrap configuration provides default settings for the pci - * inbound map (PIM). But the bootstrap config choices are limited and - * may not be sufficient for a given board. - */ -#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) -void pci_target_init(struct pci_controller *hose) -{ - /* - * Set up Direct MMIO registers - */ - /* - * PowerPC440EPX PCI Master configuration. - * Map one 1Gig range of PLB/processor addresses to PCI memory space. - * PLB address 0xA0000000-0xDFFFFFFF - * ==> PCI address 0xA0000000-0xDFFFFFFF - * Use byte reversed out routines to handle endianess. - * Make this region non-prefetchable. - */ - out32r(PCIL0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute */ - /* - disabled b4 setting */ - out32r(PCIL0_PMM0LA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 Local Address */ - out32r(PCIL0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 PCI Low Address */ - out32r(PCIL0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */ - out32r(PCIL0_PMM0MA, 0xE0000001); /* 512M + No prefetching, */ - /* and enable region */ - - out32r(PCIL0_PMM1MA, 0x00000000); /* PMM0 Mask/Attribute */ - /* - disabled b4 setting */ - out32r(PCIL0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 Local Address */ - out32r(PCIL0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 PCI Low Address */ - out32r(PCIL0_PMM1PCIHA, 0x00000000); /* PMM0 PCI High Address */ - out32r(PCIL0_PMM1MA, 0xE0000001); /* 512M + No prefetching, */ - /* and enable region */ - - out32r(PCIL0_PTM1MS, 0x00000001); /* Memory Size/Attribute */ - out32r(PCIL0_PTM1LA, 0); /* Local Addr. Reg */ - out32r(PCIL0_PTM2MS, 0); /* Memory Size/Attribute */ - out32r(PCIL0_PTM2LA, 0); /* Local Addr. Reg */ - - /* - * Set up Configuration registers - */ - - /* Program the board's subsystem id/vendor id */ - pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID, - CONFIG_SYS_PCI_SUBSYS_VENDORID); - pci_write_config_word(0, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_ID); - - /* Configure command register as bus master */ - pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER); - - /* 240nS PCI clock */ - pci_write_config_word(0, PCI_LATENCY_TIMER, 1); - - /* No error reporting */ - pci_write_config_word(0, PCI_ERREN, 0); - - pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101); - -} -#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ - #if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) void pci_master_init(struct pci_controller *hose) { diff --git a/board/amcc/taishan/taishan.c b/board/amcc/taishan/taishan.c index 81e8fe14a..574ff1a7b 100644 --- a/board/amcc/taishan/taishan.c +++ b/board/amcc/taishan/taishan.c @@ -240,45 +240,6 @@ int pci_pre_init(struct pci_controller * hose ) } #endif /* defined(CONFIG_PCI) */ -/************************************************************************* - * pci_target_init - * - * The bootstrap configuration provides default settings for the pci - * inbound map (PIM). But the bootstrap config choices are limited and - * may not be sufficient for a given board. - * - ************************************************************************/ -#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) -void pci_target_init(struct pci_controller * hose ) -{ - /*--------------------------------------------------------------------------+ - * Disable everything - *--------------------------------------------------------------------------*/ - out32r( PCIL0_PIM0SA, 0 ); /* disable */ - out32r( PCIL0_PIM1SA, 0 ); /* disable */ - out32r( PCIL0_PIM2SA, 0 ); /* disable */ - out32r( PCIL0_EROMBA, 0 ); /* disable expansion rom */ - - /*--------------------------------------------------------------------------+ - * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping - * options to not support sizes such as 128/256 MB. - *--------------------------------------------------------------------------*/ - out32r( PCIL0_PIM0LAL, CONFIG_SYS_SDRAM_BASE ); - out32r( PCIL0_PIM0LAH, 0 ); - out32r( PCIL0_PIM0SA, ~(gd->ram_size - 1) | 1 ); - - out32r( PCIL0_BAR0, 0 ); - - /*--------------------------------------------------------------------------+ - * Program the board's subsystem id/vendor id - *--------------------------------------------------------------------------*/ - out16r( PCIL0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID ); - out16r( PCIL0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID ); - - out16r( PCIL0_CMD, in16r(PCIL0_CMD) | PCI_COMMAND_MEMORY ); -} -#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ - #ifdef CONFIG_POST /* * Returns 1 if keys pressed to start the power-on long-running tests diff --git a/board/amcc/yosemite/yosemite.c b/board/amcc/yosemite/yosemite.c index e416eeb16..cd14a6a48 100644 --- a/board/amcc/yosemite/yosemite.c +++ b/board/amcc/yosemite/yosemite.c @@ -407,67 +407,6 @@ int pci_pre_init(struct pci_controller *hose) } #endif /* defined(CONFIG_PCI) */ -/************************************************************************* - * pci_target_init - * - * The bootstrap configuration provides default settings for the pci - * inbound map (PIM). But the bootstrap config choices are limited and - * may not be sufficient for a given board. - * - ************************************************************************/ -#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) -void pci_target_init(struct pci_controller *hose) -{ - /*--------------------------------------------------------------------------+ - * Set up Direct MMIO registers - *--------------------------------------------------------------------------*/ - /*--------------------------------------------------------------------------+ - | PowerPC440 EP PCI Master configuration. - | Map one 1Gig range of PLB/processor addresses to PCI memory space. - | PLB address 0xA0000000-0xDFFFFFFF ==> PCI address 0xA0000000-0xDFFFFFFF - | Use byte reversed out routines to handle endianess. - | Make this region non-prefetchable. - +--------------------------------------------------------------------------*/ - out32r(PCIL0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */ - out32r(PCIL0_PMM0LA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 Local Address */ - out32r(PCIL0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 PCI Low Address */ - out32r(PCIL0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */ - out32r(PCIL0_PMM0MA, 0xE0000001); /* 512M + No prefetching, and enable region */ - - out32r(PCIL0_PMM1MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */ - out32r(PCIL0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 Local Address */ - out32r(PCIL0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 PCI Low Address */ - out32r(PCIL0_PMM1PCIHA, 0x00000000); /* PMM0 PCI High Address */ - out32r(PCIL0_PMM1MA, 0xE0000001); /* 512M + No prefetching, and enable region */ - - out32r(PCIL0_PTM1MS, 0x00000001); /* Memory Size/Attribute */ - out32r(PCIL0_PTM1LA, 0); /* Local Addr. Reg */ - out32r(PCIL0_PTM2MS, 0); /* Memory Size/Attribute */ - out32r(PCIL0_PTM2LA, 0); /* Local Addr. Reg */ - - /*--------------------------------------------------------------------------+ - * Set up Configuration registers - *--------------------------------------------------------------------------*/ - - /* Program the board's subsystem id/vendor id */ - pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID, - CONFIG_SYS_PCI_SUBSYS_VENDORID); - pci_write_config_word(0, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_ID); - - /* Configure command register as bus master */ - pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER); - - /* 240nS PCI clock */ - pci_write_config_word(0, PCI_LATENCY_TIMER, 1); - - /* No error reporting */ - pci_write_config_word(0, PCI_ERREN, 0); - - pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101); - -} -#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ - /************************************************************************* * pci_master_init * diff --git a/board/amcc/yucca/yucca.c b/board/amcc/yucca/yucca.c index 7315033dc..0ec26f14d 100644 --- a/board/amcc/yucca/yucca.c +++ b/board/amcc/yucca/yucca.c @@ -619,44 +619,6 @@ int pci_pre_init(struct pci_controller * hose ) } #endif /* defined(CONFIG_PCI) */ -/************************************************************************* - * pci_target_init - * - * The bootstrap configuration provides default settings for the pci - * inbound map (PIM). But the bootstrap config choices are limited and - * may not be sufficient for a given board. - * - ************************************************************************/ -#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) -void pci_target_init(struct pci_controller * hose ) -{ - /*-------------------------------------------------------------------+ - * Disable everything - *-------------------------------------------------------------------*/ - out32r( PCIL0_PIM0SA, 0 ); /* disable */ - out32r( PCIL0_PIM1SA, 0 ); /* disable */ - out32r( PCIL0_PIM2SA, 0 ); /* disable */ - out32r( PCIL0_EROMBA, 0 ); /* disable expansion rom */ - - /*-------------------------------------------------------------------+ - * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 - * strapping options to not support sizes such as 128/256 MB. - *-------------------------------------------------------------------*/ - out32r( PCIL0_PIM0LAL, CONFIG_SYS_SDRAM_BASE ); - out32r( PCIL0_PIM0LAH, 0 ); - out32r( PCIL0_PIM0SA, ~(gd->ram_size - 1) | 1 ); - out32r( PCIL0_BAR0, 0 ); - - /*-------------------------------------------------------------------+ - * Program the board's subsystem id/vendor id - *-------------------------------------------------------------------*/ - out16r( PCIL0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID ); - out16r( PCIL0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID ); - - out16r( PCIL0_CMD, in16r(PCIL0_CMD) | PCI_COMMAND_MEMORY ); -} -#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ - #if defined(CONFIG_PCI) int board_pcie_card_present(int port) { diff --git a/board/esd/du440/du440.c b/board/esd/du440/du440.c index 8f9f9500e..866dcafcf 100644 --- a/board/esd/du440/du440.c +++ b/board/esd/du440/du440.c @@ -414,73 +414,6 @@ int pci_pre_init(struct pci_controller *hose) } #endif /* defined(CONFIG_PCI) */ -/* - * pci_target_init - * - * The bootstrap configuration provides default settings for the pci - * inbound map (PIM). But the bootstrap config choices are limited and - * may not be sufficient for a given board. - */ -#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) -void pci_target_init(struct pci_controller *hose) -{ - /* - * Set up Direct MMIO registers - */ - /* - * PowerPC440EPX PCI Master configuration. - * Map one 1Gig range of PLB/processor addresses to PCI memory space. - * PLB address 0xA0000000-0xDFFFFFFF - * ==> PCI address 0xA0000000-0xDFFFFFFF - * Use byte reversed out routines to handle endianess. - * Make this region non-prefetchable. - */ - out32r(PCIL0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute */ - /* - disabled b4 setting */ - out32r(PCIL0_PMM0LA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 Local Address */ - out32r(PCIL0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 PCI Low Address */ - out32r(PCIL0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */ - out32r(PCIL0_PMM0MA, 0xE0000001); /* 512M + No prefetching, */ - /* and enable region */ - - out32r(PCIL0_PMM1MA, 0x00000000); /* PMM0 Mask/Attribute */ - /* - disabled b4 setting */ - out32r(PCIL0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 Local Address */ - out32r(PCIL0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 PCI Low Address */ - out32r(PCIL0_PMM1PCIHA, 0x00000000); /* PMM0 PCI High Address */ - out32r(PCIL0_PMM1MA, 0xE0000001); /* 512M + No prefetching, */ - /* and enable region */ - - out32r(PCIL0_PTM1MS, 0x00000001); /* Memory Size/Attribute */ - out32r(PCIL0_PTM1LA, 0); /* Local Addr. Reg */ - out32r(PCIL0_PTM2MS, 0); /* Memory Size/Attribute */ - out32r(PCIL0_PTM2LA, 0); /* Local Addr. Reg */ - - /* - * Set up Configuration registers - */ - - /* Program the board's subsystem id/vendor id */ - pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID, - PCI_VENDOR_ID_ESDGMBH); - pci_write_config_word(0, PCI_SUBSYSTEM_ID, PCI_DEVICE_ID_DU440); - - pci_write_config_word(0, PCI_CLASS_SUB_CODE, PCI_CLASS_BRIDGE_HOST); - - /* Configure command register as bus master */ - pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER); - - /* 240nS PCI clock */ - pci_write_config_word(0, PCI_LATENCY_TIMER, 1); - - /* No error reporting */ - pci_write_config_word(0, PCI_ERREN, 0); - - pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101); - -} -#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ - #if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) void pci_master_init(struct pci_controller *hose) { diff --git a/board/esd/du440/du440.h b/board/esd/du440/du440.h index a124a7ee9..37697ec85 100644 --- a/board/esd/du440/du440.h +++ b/board/esd/du440/du440.h @@ -38,6 +38,3 @@ #define PWR_RDY 0x10 #define CPLD_IRQ (32+30) - -#define PCI_VENDOR_ID_ESDGMBH 0x12fe -#define PCI_DEVICE_ID_DU440 0x0444 diff --git a/board/gdsys/gdppc440etx/gdppc440etx.c b/board/gdsys/gdppc440etx/gdppc440etx.c index 92f5d822f..b93a42015 100644 --- a/board/gdsys/gdppc440etx/gdppc440etx.c +++ b/board/gdsys/gdppc440etx/gdppc440etx.c @@ -216,69 +216,6 @@ int pci_pre_init(struct pci_controller *hose) } #endif /* defined(CONFIG_PCI) */ -/* - * pci_target_init - * - * The bootstrap configuration provides default settings for the pci - * inbound map (PIM). But the bootstrap config choices are limited and - * may not be sufficient for a given board. - * - */ -#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) -void pci_target_init(struct pci_controller *hose) -{ - /* - * Set up Direct MMIO registers - */ - - /* - * PowerPC440 EP PCI Master configuration. - * Map one 1Gig range of PLB/processor addresses to PCI memory space. - * PLB address 0xA0000000-0xDFFFFFFF - * ==> PCI address 0xA0000000-0xDFFFFFFF - * Use byte reversed out routines to handle endianess. - * Make this region non-prefetchable. - */ - out32r(PCIL0_PMM0MA, 0x00000000); /* disabled b4 setting */ - out32r(PCIL0_PMM0LA, CONFIG_SYS_PCI_MEMBASE); - out32r(PCIL0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE); - out32r(PCIL0_PMM0PCIHA, 0x00000000); - out32r(PCIL0_PMM0MA, 0xE0000001); /* 512M, no prefetch, enable region */ - - out32r(PCIL0_PMM1MA, 0x00000000); /* disabled b4 setting */ - out32r(PCIL0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2); - out32r(PCIL0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2); - out32r(PCIL0_PMM1PCIHA, 0x00000000); - out32r(PCIL0_PMM1MA, 0xE0000001); /* 512M, no prefetch, enable region */ - - out32r(PCIL0_PTM1MS, 0x00000001); - out32r(PCIL0_PTM1LA, 0); - out32r(PCIL0_PTM2MS, 0); - out32r(PCIL0_PTM2LA, 0); - - /* - * Set up Configuration registers - */ - - /* Program the board's subsystem id/vendor id */ - pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID, - CONFIG_SYS_PCI_SUBSYS_VENDORID); - pci_write_config_word(0, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_ID); - - /* Configure command register as bus master */ - pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER); - - /* 240nS PCI clock */ - pci_write_config_word(0, PCI_LATENCY_TIMER, 1); - - /* No error reporting */ - pci_write_config_word(0, PCI_ERREN, 0); - - pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101); - -} -#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ - /* * pci_master_init * diff --git a/board/gdsys/intip/intip.c b/board/gdsys/intip/intip.c index 49d245135..23a10c41f 100644 --- a/board/gdsys/intip/intip.c +++ b/board/gdsys/intip/intip.c @@ -141,43 +141,6 @@ int checkboard(void) return 0; } -/* - * pci_target_init - * - * The bootstrap configuration provides default settings for the pci - * inbound map (PIM). But the bootstrap config choices are limited and - * may not be sufficient for a given board. - */ -#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) -void pci_target_init(struct pci_controller *hose) -{ - /* - * Disable everything - */ - out_le32((void *)PCIL0_PIM0SA, 0); /* disable */ - out_le32((void *)PCIL0_PIM1SA, 0); /* disable */ - out_le32((void *)PCIL0_PIM2SA, 0); /* disable */ - out_le32((void *)PCIL0_EROMBA, 0); /* disable expansion rom */ - - /* - * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 - * strapping options to not support sizes such as 128/256 MB. - */ - out_le32((void *)PCIL0_PIM0LAL, CONFIG_SYS_SDRAM_BASE); - out_le32((void *)PCIL0_PIM0LAH, 0); - out_le32((void *)PCIL0_PIM0SA, ~(gd->ram_size - 1) | 1); - out_le32((void *)PCIL0_BAR0, 0); - - /* - * Program the board's subsystem id/vendor id - */ - out_le16((void *)PCIL0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID); - out_le16((void *)PCIL0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID); - - out_le16((void *)PCIL0_CMD, in16r(PCIL0_CMD) | PCI_COMMAND_MEMORY); -} -#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ - int board_early_init_r(void) { /* diff --git a/board/korat/korat.c b/board/korat/korat.c index b0e6a56a6..02ebfdf37 100644 --- a/board/korat/korat.c +++ b/board/korat/korat.c @@ -35,6 +35,7 @@ #include #include #include +#include DECLARE_GLOBAL_DATA_PTR; @@ -668,60 +669,8 @@ int pci_pre_init(struct pci_controller *hose) #if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) void pci_target_init(struct pci_controller *hose) { - /* - * Set up Direct MMIO registers - */ - /* - * PowerPC440EPX PCI Master configuration. - * Map one 1Gig range of PLB/processor addresses to PCI memory space. - * PLB address 0x80000000-0xBFFFFFFF - * ==> PCI address 0x80000000-0xBFFFFFFF - * Use byte reversed out routines to handle endianess. - * Make this region non-prefetchable. - */ - out32r(PCIL0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute */ - /* - disabled b4 setting */ - out32r(PCIL0_PMM0LA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 Local Address */ - out32r(PCIL0_PMM0PCILA, - CONFIG_SYS_PCI_MEMBASE); /* PMM0 PCI Low Address */ - out32r(PCIL0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */ - out32r(PCIL0_PMM0MA, 0xE0000001); /* 512M + No prefetching, */ - /* and enable region */ - - out32r(PCIL0_PMM1MA, 0x00000000); /* PMM0 Mask/Attribute */ - /* - disabled b4 setting */ - out32r(PCIL0_PMM1LA, - CONFIG_SYS_PCI_MEMBASE + 0x20000000); /* PMM0 Local Address */ - out32r(PCIL0_PMM1PCILA, - CONFIG_SYS_PCI_MEMBASE + 0x20000000); /* PMM0 PCI Low Address */ - out32r(PCIL0_PMM1PCIHA, 0x00000000); /* PMM0 PCI High Address */ - out32r(PCIL0_PMM1MA, 0xE0000001); /* 512M + No prefetching, */ - /* and enable region */ - - out32r(PCIL0_PTM1MS, 0x00000001); /* Memory Size/Attribute */ - out32r(PCIL0_PTM1LA, 0); /* Local Addr. Reg */ - out32r(PCIL0_PTM2MS, 0); /* Memory Size/Attribute */ - out32r(PCIL0_PTM2LA, 0); /* Local Addr. Reg */ - - /* - * Set up Configuration registers - */ - - /* Program the board's subsystem id/vendor id */ - pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID, - CONFIG_SYS_PCI_SUBSYS_VENDORID); - pci_write_config_word(0, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_ID); - - /* Configure command register as bus master */ - pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER); - - /* 240nS PCI clock */ - pci_write_config_word(0, PCI_LATENCY_TIMER, 1); - - /* No error reporting */ - pci_write_config_word(0, PCI_ERREN, 0); - - pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101); + /* First do 440EP(x) common setup */ + __pci_target_init(hose); /* * Set up Configuration registers for on-board NEC uPD720101 USB diff --git a/board/lwmon5/lwmon5.c b/board/lwmon5/lwmon5.c index 09ba2b933..77f2d7f68 100644 --- a/board/lwmon5/lwmon5.c +++ b/board/lwmon5/lwmon5.c @@ -330,67 +330,6 @@ int pci_pre_init(struct pci_controller *hose) } #endif /* defined(CONFIG_PCI) */ -/************************************************************************* - * pci_target_init - * - * The bootstrap configuration provides default settings for the pci - * inbound map (PIM). But the bootstrap config choices are limited and - * may not be sufficient for a given board. - * - ************************************************************************/ -#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) -void pci_target_init(struct pci_controller *hose) -{ - /*--------------------------------------------------------------------------+ - * Set up Direct MMIO registers - *--------------------------------------------------------------------------*/ - /*--------------------------------------------------------------------------+ - | PowerPC440EPX PCI Master configuration. - | Map one 1Gig range of PLB/processor addresses to PCI memory space. - | PLB address 0xA0000000-0xDFFFFFFF ==> PCI address 0xA0000000-0xDFFFFFFF - | Use byte reversed out routines to handle endianess. - | Make this region non-prefetchable. - +--------------------------------------------------------------------------*/ - out32r(PCIL0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */ - out32r(PCIL0_PMM0LA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 Local Address */ - out32r(PCIL0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 PCI Low Address */ - out32r(PCIL0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */ - out32r(PCIL0_PMM0MA, 0xE0000001); /* 512M + No prefetching, and enable region */ - - out32r(PCIL0_PMM1MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */ - out32r(PCIL0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 Local Address */ - out32r(PCIL0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 PCI Low Address */ - out32r(PCIL0_PMM1PCIHA, 0x00000000); /* PMM0 PCI High Address */ - out32r(PCIL0_PMM1MA, 0xE0000001); /* 512M + No prefetching, and enable region */ - - out32r(PCIL0_PTM1MS, 0x00000001); /* Memory Size/Attribute */ - out32r(PCIL0_PTM1LA, 0); /* Local Addr. Reg */ - out32r(PCIL0_PTM2MS, 0); /* Memory Size/Attribute */ - out32r(PCIL0_PTM2LA, 0); /* Local Addr. Reg */ - - /*--------------------------------------------------------------------------+ - * Set up Configuration registers - *--------------------------------------------------------------------------*/ - - /* Program the board's subsystem id/vendor id */ - pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID, - CONFIG_SYS_PCI_SUBSYS_VENDORID); - pci_write_config_word(0, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_ID); - - /* Configure command register as bus master */ - pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER); - - /* 240nS PCI clock */ - pci_write_config_word(0, PCI_LATENCY_TIMER, 1); - - /* No error reporting */ - pci_write_config_word(0, PCI_ERREN, 0); - - pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101); - -} -#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ - /************************************************************************* * pci_master_init * diff --git a/board/netstal/hcu5/hcu5.c b/board/netstal/hcu5/hcu5.c index 7ffc26202..144fdd970 100644 --- a/board/netstal/hcu5/hcu5.c +++ b/board/netstal/hcu5/hcu5.c @@ -376,71 +376,6 @@ int pci_pre_init(struct pci_controller *hose) return board_with_pci(); } -/* - * pci_target_init - * - * The bootstrap configuration provides default settings for the pci - * inbound map (PIM). But the bootstrap config choices are limited and - * may not be sufficient for a given board. - * - */ -void pci_target_init(struct pci_controller *hose) -{ - if (!board_with_pci()) { return; } - /* - * Set up Direct MMIO registers - * - * PowerPC440EPX PCI Master configuration. - * Map one 1Gig range of PLB/processor addresses to PCI memory space. - * PLB address 0xA0000000-0xDFFFFFFF ==> PCI address - * 0xA0000000-0xDFFFFFFF - * Use byte reversed out routines to handle endianess. - * Make this region non-prefetchable. - */ - /* PMM0 Mask/Attribute - disabled b4 setting */ - out32r(PCIL0_PMM0MA, 0x00000000); - out32r(PCIL0_PMM0LA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 Local Address */ - /* PMM0 PCI Low Address */ - out32r(PCIL0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE); - out32r(PCIL0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */ - /* 512M + No prefetching, and enable region */ - out32r(PCIL0_PMM0MA, 0xE0000001); - - /* PMM0 Mask/Attribute - disabled b4 setting */ - out32r(PCIL0_PMM1MA, 0x00000000); - out32r(PCIL0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 Local Address */ - /* PMM0 PCI Low Address */ - out32r(PCIL0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2); - out32r(PCIL0_PMM1PCIHA, 0x00000000); /* PMM0 PCI High Address */ - /* 512M + No prefetching, and enable region */ - out32r(PCIL0_PMM1MA, 0xE0000001); - - out32r(PCIL0_PTM1MS, 0x00000001); /* Memory Size/Attribute */ - out32r(PCIL0_PTM1LA, 0); /* Local Addr. Reg */ - out32r(PCIL0_PTM2MS, 0); /* Memory Size/Attribute */ - out32r(PCIL0_PTM2LA, 0); /* Local Addr. Reg */ - - /* - * Set up Configuration registers - */ - - /* Program the board's subsystem id/vendor id */ - pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID, - CONFIG_SYS_PCI_SUBSYS_VENDORID); - pci_write_config_word(0, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_ID); - - /* Configure command register as bus master */ - pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER); - - /* 240nS PCI clock */ - pci_write_config_word(0, PCI_LATENCY_TIMER, 1); - - /* No error reporting */ - pci_write_config_word(0, PCI_ERREN, 0); - - pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101); -} - /* * pci_master_init * diff --git a/board/pcs440ep/pcs440ep.c b/board/pcs440ep/pcs440ep.c index 2155711d6..929375987 100644 --- a/board/pcs440ep/pcs440ep.c +++ b/board/pcs440ep/pcs440ep.c @@ -605,67 +605,6 @@ int pci_pre_init(struct pci_controller *hose) } #endif /* defined(CONFIG_PCI) */ -/************************************************************************* - * pci_target_init - * - * The bootstrap configuration provides default settings for the pci - * inbound map (PIM). But the bootstrap config choices are limited and - * may not be sufficient for a given board. - * - ************************************************************************/ -#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) -void pci_target_init(struct pci_controller *hose) -{ - /*--------------------------------------------------------------------------+ - * Set up Direct MMIO registers - *--------------------------------------------------------------------------*/ - /*--------------------------------------------------------------------------+ - | PowerPC440 EP PCI Master configuration. - | Map one 1Gig range of PLB/processor addresses to PCI memory space. - | PLB address 0xA0000000-0xDFFFFFFF ==> PCI address 0xA0000000-0xDFFFFFFF - | Use byte reversed out routines to handle endianess. - | Make this region non-prefetchable. - +--------------------------------------------------------------------------*/ - out32r(PCIL0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */ - out32r(PCIL0_PMM0LA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 Local Address */ - out32r(PCIL0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 PCI Low Address */ - out32r(PCIL0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */ - out32r(PCIL0_PMM0MA, 0xE0000001); /* 512M + No prefetching, and enable region */ - - out32r(PCIL0_PMM1MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */ - out32r(PCIL0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 Local Address */ - out32r(PCIL0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 PCI Low Address */ - out32r(PCIL0_PMM1PCIHA, 0x00000000); /* PMM0 PCI High Address */ - out32r(PCIL0_PMM1MA, 0xE0000001); /* 512M + No prefetching, and enable region */ - - out32r(PCIL0_PTM1MS, 0x00000001); /* Memory Size/Attribute */ - out32r(PCIL0_PTM1LA, 0); /* Local Addr. Reg */ - out32r(PCIL0_PTM2MS, 0); /* Memory Size/Attribute */ - out32r(PCIL0_PTM2LA, 0); /* Local Addr. Reg */ - - /*--------------------------------------------------------------------------+ - * Set up Configuration registers - *--------------------------------------------------------------------------*/ - - /* Program the board's subsystem id/vendor id */ - pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID, - CONFIG_SYS_PCI_SUBSYS_VENDORID); - pci_write_config_word(0, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_ID); - - /* Configure command register as bus master */ - pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER); - - /* 240nS PCI clock */ - pci_write_config_word(0, PCI_LATENCY_TIMER, 1); - - /* No error reporting */ - pci_write_config_word(0, PCI_ERREN, 0); - - pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101); - -} -#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ - /************************************************************************* * pci_master_init * diff --git a/board/prodrive/alpr/alpr.c b/board/prodrive/alpr/alpr.c index e9e2bf3e0..c06aadb41 100644 --- a/board/prodrive/alpr/alpr.c +++ b/board/prodrive/alpr/alpr.c @@ -178,45 +178,6 @@ int pci_pre_init(struct pci_controller * hose ) } #endif /* defined(CONFIG_PCI) */ -/************************************************************************* - * pci_target_init - * - * The bootstrap configuration provides default settings for the pci - * inbound map (PIM). But the bootstrap config choices are limited and - * may not be sufficient for a given board. - * - ************************************************************************/ -#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) -void pci_target_init(struct pci_controller * hose ) -{ - /*--------------------------------------------------------------------------+ - * Disable everything - *--------------------------------------------------------------------------*/ - out32r( PCIL0_PIM0SA, 0 ); /* disable */ - out32r( PCIL0_PIM1SA, 0 ); /* disable */ - out32r( PCIL0_PIM2SA, 0 ); /* disable */ - out32r( PCIL0_EROMBA, 0 ); /* disable expansion rom */ - - /*--------------------------------------------------------------------------+ - * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping - * options to not support sizes such as 128/256 MB. - *--------------------------------------------------------------------------*/ - out32r( PCIL0_PIM0LAL, CONFIG_SYS_SDRAM_BASE ); - out32r( PCIL0_PIM0LAH, 0 ); - out32r( PCIL0_PIM0SA, ~(gd->ram_size - 1) | 1 ); - - out32r( PCIL0_BAR0, 0 ); - - /*--------------------------------------------------------------------------+ - * Program the board's subsystem id/vendor id - *--------------------------------------------------------------------------*/ - out16r( PCIL0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID ); - out16r( PCIL0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID ); - - out16r( PCIL0_CMD, in16r(PCIL0_CMD) | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); -} -#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ - /************************************************************************* * Override weak is_pci_host() * diff --git a/board/prodrive/p3p440/p3p440.c b/board/prodrive/p3p440/p3p440.c index e07400794..5761e7084 100644 --- a/board/prodrive/p3p440/p3p440.c +++ b/board/prodrive/p3p440/p3p440.c @@ -195,45 +195,6 @@ int pci_pre_init(struct pci_controller *hose) } #endif /* defined(CONFIG_PCI) */ -/************************************************************************* - * pci_target_init - * - * The bootstrap configuration provides default settings for the pci - * inbound map (PIM). But the bootstrap config choices are limited and - * may not be sufficient for a given board. - * - ************************************************************************/ -#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) -void pci_target_init(struct pci_controller *hose) -{ - /*--------------------------------------------------------------------------+ - * Disable everything - *--------------------------------------------------------------------------*/ - out32r(PCIL0_PIM0SA, 0); /* disable */ - out32r(PCIL0_PIM1SA, 0); /* disable */ - out32r(PCIL0_PIM2SA, 0); /* disable */ - out32r(PCIL0_EROMBA, 0); /* disable expansion rom */ - - /*--------------------------------------------------------------------------+ - * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping - * options to not support sizes such as 128/256 MB. - *--------------------------------------------------------------------------*/ - out32r(PCIL0_PIM0LAL, CONFIG_SYS_SDRAM_BASE); - out32r(PCIL0_PIM0LAH, 0); - out32r(PCIL0_PIM0SA, ~(gd->ram_size - 1) | 1); - - out32r(PCIL0_BAR0, 0); - - /*--------------------------------------------------------------------------+ - * Program the board's subsystem id/vendor id - *--------------------------------------------------------------------------*/ - out16r(PCIL0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID); - out16r(PCIL0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID); - - out16r(PCIL0_CMD, in16r(PCIL0_CMD) | PCI_COMMAND_MEMORY); -} -#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ - /************************************************************************* * Override weak is_pci_host() * diff --git a/board/sandburst/common/sb_common.c b/board/sandburst/common/sb_common.c index 574908458..45e904385 100644 --- a/board/sandburst/common/sb_common.c +++ b/board/sandburst/common/sb_common.c @@ -332,46 +332,6 @@ int pci_pre_init(struct pci_controller * hose ) } #endif /* defined(CONFIG_PCI) */ -/************************************************************************* - * pci_target_init - * - * The bootstrap configuration provides default settings for the pci - * inbound map (PIM). But the bootstrap config choices are limited and - * may not be sufficient for a given board. - * - ************************************************************************/ -#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) -void pci_target_init(struct pci_controller * hose ) -{ - /*--------------------------------------------------------------------------+ - * Disable everything - *--------------------------------------------------------------------------*/ - out32r( PCIL0_PIM0SA, 0 ); /* disable */ - out32r( PCIL0_PIM1SA, 0 ); /* disable */ - out32r( PCIL0_PIM2SA, 0 ); /* disable */ - out32r( PCIL0_EROMBA, 0 ); /* disable expansion rom */ - - /*--------------------------------------------------------------------------+ - * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping - * options to not support sizes such as 128/256 MB. - *--------------------------------------------------------------------------*/ - out32r( PCIL0_PIM0LAL, CONFIG_SYS_SDRAM_BASE ); - out32r( PCIL0_PIM0LAH, 0 ); - out32r( PCIL0_PIM0SA, ~(gd->ram_size - 1) | 1 ); - - out32r( PCIL0_BAR0, 0 ); - - /*--------------------------------------------------------------------------+ - * Program the board's subsystem id/vendor id - *--------------------------------------------------------------------------*/ - out16r( PCIL0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID ); - out16r( PCIL0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID ); - - out16r( PCIL0_CMD, in16r(PCIL0_CMD) | PCI_COMMAND_MEMORY ); -} -#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ - - /************************************************************************* * board_get_enetaddr * diff --git a/board/xes/xpedite1000/xpedite1000.c b/board/xes/xpedite1000/xpedite1000.c index 0c4cf9463..db37ca051 100644 --- a/board/xes/xpedite1000/xpedite1000.c +++ b/board/xes/xpedite1000/xpedite1000.c @@ -166,38 +166,6 @@ int pci_pre_init(struct pci_controller * hose) } #endif /* defined(CONFIG_PCI) */ -#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) -/* - * The bootstrap configuration provides default settings for the pci - * inbound map (PIM). But the bootstrap config choices are limited and - * may not be sufficient for a given board. - */ -void pci_target_init(struct pci_controller * hose) -{ - /* Disable everything */ - out32r(PCIL0_PIM0SA, 0); - out32r(PCIL0_PIM1SA, 0); - out32r(PCIL0_PIM2SA, 0); - out32r(PCIL0_EROMBA, 0); /* disable expansion rom */ - - /* - * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping - * options to not support sizes such as 128/256 MB. - */ - out32r(PCIL0_PIM0LAL, CONFIG_SYS_SDRAM_BASE); - out32r(PCIL0_PIM0LAH, 0); - out32r(PCIL0_PIM0SA, ~(gd->ram_size - 1) | 1); - - out32r(PCIL0_BAR0, 0); - - /* Program the board's subsystem id/vendor id */ - out16r(PCIL0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID); - out16r(PCIL0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID); - - out16r(PCIL0_CMD, in16r(PCIL0_CMD) | PCI_COMMAND_MEMORY); -} -#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ - #if defined(CONFIG_PCI) /* * Override weak is_pci_host() diff --git a/cpu/ppc4xx/4xx_pci.c b/cpu/ppc4xx/4xx_pci.c index 40017f4d6..20e134b63 100644 --- a/cpu/ppc4xx/4xx_pci.c +++ b/cpu/ppc4xx/4xx_pci.c @@ -77,6 +77,7 @@ #include #endif #include +#include #include #ifdef CONFIG_PCI @@ -499,6 +500,111 @@ int __is_pci_host(struct pci_controller *hose) int is_pci_host(struct pci_controller *hose) __attribute__((weak, alias("__is_pci_host"))); +/* + * pci_target_init + * + * The bootstrap configuration provides default settings for the pci + * inbound map (PIM). But the bootstrap config choices are limited and + * may not be sufficient for a given board. + */ +#if defined(CONFIG_SYS_PCI_TARGET_INIT) +#if defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \ + defined(CONFIG_440GR) || defined(CONFIG_440GRX) +void __pci_target_init(struct pci_controller *hose) +{ + /* + * Set up Direct MMIO registers + */ + + /* + * PowerPC440 EP PCI Master configuration. + * Map one 1Gig range of PLB/processor addresses to PCI memory space. + * PLB address 0xA0000000-0xDFFFFFFF ==> PCI address 0xA0000000-0xDFFFFFFF + * Use byte reversed out routines to handle endianess. + * Make this region non-prefetchable. + */ + /* PMM0 Mask/Attribute - disabled b4 setting */ + out_le32((void *)PCIL0_PMM0MA, 0x00000000); + /* PMM0 Local Address */ + out_le32((void *)PCIL0_PMM0LA, CONFIG_SYS_PCI_MEMBASE); + /* PMM0 PCI Low Address */ + out_le32((void *)PCIL0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE); + /* PMM0 PCI High Address */ + out_le32((void *)PCIL0_PMM0PCIHA, 0x00000000); + /* 512M + No prefetching, and enable region */ + out_le32((void *)PCIL0_PMM0MA, 0xE0000001); + + /* PMM1 Mask/Attribute - disabled b4 setting */ + out_le32((void *)PCIL0_PMM1MA, 0x00000000); + /* PMM1 Local Address */ + out_le32((void *)PCIL0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2); + /* PMM1 PCI Low Address */ + out_le32((void *)PCIL0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2); + /* PMM1 PCI High Address */ + out_le32((void *)PCIL0_PMM1PCIHA, 0x00000000); + /* 512M + No prefetching, and enable region */ + out_le32((void *)PCIL0_PMM1MA, 0xE0000001); + + out_le32((void *)PCIL0_PTM1MS, 0x00000001); /* Memory Size/Attribute */ + out_le32((void *)PCIL0_PTM1LA, 0); /* Local Addr. Reg */ + out_le32((void *)PCIL0_PTM2MS, 0); /* Memory Size/Attribute */ + out_le32((void *)PCIL0_PTM2LA, 0); /* Local Addr. Reg */ + + /* + * Set up Configuration registers + */ + + /* Program the board's subsystem id/vendor id */ + pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID, + CONFIG_SYS_PCI_SUBSYS_VENDORID); + pci_write_config_word(0, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_ID); + + /* Configure command register as bus master */ + pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER); + + /* 240nS PCI clock */ + pci_write_config_word(0, PCI_LATENCY_TIMER, 1); + + /* No error reporting */ + pci_write_config_word(0, PCI_ERREN, 0); + + pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101); +} +#else /* defined(CONFIG_440EP) ... */ +void __pci_target_init(struct pci_controller * hose) +{ + /* + * Disable everything + */ + out_le32((void *)PCIL0_PIM0SA, 0); /* disable */ + out_le32((void *)PCIL0_PIM1SA, 0); /* disable */ + out_le32((void *)PCIL0_PIM2SA, 0); /* disable */ + out_le32((void *)PCIL0_EROMBA, 0); /* disable expansion rom */ + + /* + * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 + * strapping options do not support sizes such as 128/256 MB. + */ + out_le32((void *)PCIL0_PIM0LAL, CONFIG_SYS_SDRAM_BASE); + out_le32((void *)PCIL0_PIM0LAH, 0); + out_le32((void *)PCIL0_PIM0SA, ~(gd->ram_size - 1) | 1); + out_le32((void *)PCIL0_BAR0, 0); + + /* + * Program the board's subsystem id/vendor id + */ + out_le16((void *)PCIL0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID); + out_le16((void *)PCIL0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID); + + out_le16((void *)PCIL0_CMD, in_le16((void *)PCIL0_CMD) | + PCI_COMMAND_MEMORY); +} +#endif /* defined(CONFIG_440EP) ... */ +void pci_target_init(struct pci_controller * hose) + __attribute__((weak, alias("__pci_target_init"))); + +#endif /* defined(CONFIG_SYS_PCI_TARGET_INIT) */ + int pci_440_init (struct pci_controller *hose) { int reg_num = 0; diff --git a/include/asm-ppc/4xx_pci.h b/include/asm-ppc/4xx_pci.h index 30125a19e..5400a035e 100644 --- a/include/asm-ppc/4xx_pci.h +++ b/include/asm-ppc/4xx_pci.h @@ -49,4 +49,6 @@ #define PCIDEVID_405GP 0x0 +void __pci_target_init(struct pci_controller *hose); + #endif diff --git a/include/configs/DU440.h b/include/configs/DU440.h index e9ea1bf7d..65dc2359d 100644 --- a/include/configs/DU440.h +++ b/include/configs/DU440.h @@ -60,8 +60,9 @@ #define CONFIG_SYS_PCI_MEMBASE1 CONFIG_SYS_PCI_MEMBASE + 0x10000000 #define CONFIG_SYS_PCI_MEMBASE2 CONFIG_SYS_PCI_MEMBASE1 + 0x10000000 #define CONFIG_SYS_PCI_MEMBASE3 CONFIG_SYS_PCI_MEMBASE2 + 0x10000000 -#define CONFIG_SYS_PCI_IOBASE 0xe8000000 - +#define CONFIG_SYS_PCI_IOBASE 0xe8000000 +#define CONFIG_SYS_PCI_SUBSYS_VENDORID PCI_VENDOR_ID_ESDGMBH +#define CONFIG_SYS_PCI_SUBSYS_ID 0x0444 /* device ID for DU440 */ /* Don't change either of these */ #define CONFIG_SYS_PERIPHERAL_BASE 0xef600000 /* internal peripherals */ diff --git a/include/configs/PMC440.h b/include/configs/PMC440.h index d6e2f6bc5..d2c5188a6 100644 --- a/include/configs/PMC440.h +++ b/include/configs/PMC440.h @@ -440,6 +440,8 @@ #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x12FE /* PCI Vendor ID: esd gmbh */ #define CONFIG_SYS_PCI_SUBSYS_ID_NONMONARCH 0x0441 /* PCI Device ID: Non-Monarch */ #define CONFIG_SYS_PCI_SUBSYS_ID_MONARCH 0x0440 /* PCI Device ID: Monarch */ +/* for weak __pci_target_init() */ +#define CONFIG_SYS_PCI_SUBSYS_ID CONFIG_SYS_PCI_SUBSYS_ID_MONARCH #define CONFIG_SYS_PCI_CLASSCODE_NONMONARCH PCI_CLASS_PROCESSOR_POWERPC #define CONFIG_SYS_PCI_CLASSCODE_MONARCH PCI_CLASS_BRIDGE_HOST diff --git a/include/configs/korat.h b/include/configs/korat.h index ea6ba8938..7e74ef705 100644 --- a/include/configs/korat.h +++ b/include/configs/korat.h @@ -69,6 +69,7 @@ #define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_OCM_BASE #define CONFIG_SYS_PCI_BASE 0xe0000000 /* Internal PCI regs */ #define CONFIG_SYS_PCI_MEMBASE 0x80000000 /* mapped pci memory */ +#define CONFIG_SYS_PCI_MEMBASE2 (CONFIG_SYS_PCI_MEMBASE + 0x20000000) /* Don't change either of these */ #define CONFIG_SYS_PERIPHERAL_BASE 0xef600000 /* internal peripherals */ -- cgit v1.2.3 From a760b0203155da6fb8b8e9086169bb87d09d76fa Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Thu, 12 Nov 2009 16:41:09 +0100 Subject: ppc4xx: Consolidate pci_pre_init() function This patch removes the duplicted implementations of the pci_pre_init() function by introducing a weak default function for it. This weak default has a different implementation for some PPC variants. It can be overridden by a board specific version. Signed-off-by: Stefan Roese --- board/amcc/bamboo/bamboo.c | 55 --------------- board/amcc/ebony/ebony.c | 31 --------- board/amcc/katmai/katmai.c | 31 --------- board/amcc/kilauea/kilauea.c | 19 ------ board/amcc/luan/luan.c | 33 --------- board/amcc/makalu/makalu.c | 19 ------ board/amcc/ocotea/ocotea.c | 32 --------- board/amcc/sequoia/sequoia.c | 59 +--------------- board/amcc/taishan/taishan.c | 31 --------- board/amcc/yosemite/yosemite.c | 55 --------------- board/amcc/yucca/yucca.c | 31 --------- board/esd/du440/du440.c | 54 --------------- board/esd/pmc440/pmc440.c | 60 +--------------- board/gdsys/gdppc440etx/gdppc440etx.c | 49 ++----------- board/korat/korat.c | 60 +--------------- board/lwmon5/lwmon5.c | 55 --------------- board/pcs440ep/pcs440ep.c | 55 --------------- board/prodrive/alpr/alpr.c | 34 ++------- board/prodrive/p3p440/p3p440.c | 31 --------- board/sandburst/common/sb_common.c | 32 --------- board/xes/xpedite1000/xpedite1000.c | 3 +- cpu/ppc4xx/4xx_pci.c | 125 ++++++++++++++++++++++++++++------ cpu/ppc4xx/cpu.c | 2 +- include/asm-ppc/4xx_pci.h | 5 ++ include/configs/PMC440.h | 1 + include/configs/korat.h | 1 + include/configs/sequoia.h | 1 + include/ppc440.h | 3 +- 28 files changed, 130 insertions(+), 837 deletions(-) (limited to 'board') diff --git a/board/amcc/bamboo/bamboo.c b/board/amcc/bamboo/bamboo.c index 3ffdac8bd..7c34c4445 100644 --- a/board/amcc/bamboo/bamboo.c +++ b/board/amcc/bamboo/bamboo.c @@ -466,61 +466,6 @@ phys_size_t initdram (int board_type) #endif } -/************************************************************************* - * pci_pre_init - * - * This routine is called just prior to registering the hose and gives - * the board the opportunity to check things. Returning a value of zero - * indicates that things are bad & PCI initialization should be aborted. - * - * Different boards may wish to customize the pci controller structure - * (add regions, override default access routines, etc) or perform - * certain pre-initialization actions. - * - ************************************************************************/ -#if defined(CONFIG_PCI) -int pci_pre_init(struct pci_controller *hose) -{ - unsigned long addr; - - /*-------------------------------------------------------------------------+ - | Set priority for all PLB3 devices to 0. - | Set PLB3 arbiter to fair mode. - +-------------------------------------------------------------------------*/ - mfsdr(SD0_AMP1, addr); - mtsdr(SD0_AMP1, (addr & 0x000000FF) | 0x0000FF00); - addr = mfdcr(PLB3_ACR); - mtdcr(PLB3_ACR, addr | 0x80000000); - - /*-------------------------------------------------------------------------+ - | Set priority for all PLB4 devices to 0. - +-------------------------------------------------------------------------*/ - mfsdr(SD0_AMP0, addr); - mtsdr(SD0_AMP0, (addr & 0x000000FF) | 0x0000FF00); - addr = mfdcr(PLB4_ACR) | 0xa0000000; /* Was 0x8---- */ - mtdcr(PLB4_ACR, addr); - - /*-------------------------------------------------------------------------+ - | Set Nebula PLB4 arbiter to fair mode. - +-------------------------------------------------------------------------*/ - /* Segment0 */ - addr = (mfdcr(PLB0_ACR) & ~PLB0_ACR_PPM_MASK) | PLB0_ACR_PPM_FAIR; - addr = (addr & ~PLB0_ACR_HBU_MASK) | PLB0_ACR_HBU_ENABLED; - addr = (addr & ~PLB0_ACR_RDP_MASK) | PLB0_ACR_RDP_4DEEP; - addr = (addr & ~PLB0_ACR_WRP_MASK) | PLB0_ACR_WRP_2DEEP; - mtdcr(PLB0_ACR, addr); - - /* Segment1 */ - addr = (mfdcr(PLB1_ACR) & ~PLB1_ACR_PPM_MASK) | PLB1_ACR_PPM_FAIR; - addr = (addr & ~PLB1_ACR_HBU_MASK) | PLB1_ACR_HBU_ENABLED; - addr = (addr & ~PLB1_ACR_RDP_MASK) | PLB1_ACR_RDP_4DEEP; - addr = (addr & ~PLB1_ACR_WRP_MASK) | PLB1_ACR_WRP_2DEEP; - mtdcr(PLB1_ACR, addr); - - return 1; -} -#endif /* defined(CONFIG_PCI) */ - /************************************************************************* * pci_master_init * diff --git a/board/amcc/ebony/ebony.c b/board/amcc/ebony/ebony.c index e4d168f9d..923dbca71 100644 --- a/board/amcc/ebony/ebony.c +++ b/board/amcc/ebony/ebony.c @@ -164,34 +164,3 @@ long int fixed_sdram(void) return (128 * 1024 * 1024); /* 128 MB */ } #endif /* !defined(CONFIG_SPD_EEPROM) */ - -/************************************************************************* - * pci_pre_init - * - * This routine is called just prior to registering the hose and gives - * the board the opportunity to check things. Returning a value of zero - * indicates that things are bad & PCI initialization should be aborted. - * - * Different boards may wish to customize the pci controller structure - * (add regions, override default access routines, etc) or perform - * certain pre-initialization actions. - * - ************************************************************************/ -#if defined(CONFIG_PCI) -int pci_pre_init(struct pci_controller *hose) -{ - unsigned long strap; - - /*--------------------------------------------------------------------------+ - * The ebony board is always configured as the host & requires the - * PCI arbiter to be enabled. - *--------------------------------------------------------------------------*/ - strap = mfdcr(CPC0_STRP1); - if ((strap & 0x00100000) == 0) { - printf("PCI: CPC0_STRP1[PAE] not set.\n"); - return 0; - } - - return 1; -} -#endif /* defined(CONFIG_PCI) */ diff --git a/board/amcc/katmai/katmai.c b/board/amcc/katmai/katmai.c index f0b48c0d3..86dc923e7 100644 --- a/board/amcc/katmai/katmai.c +++ b/board/amcc/katmai/katmai.c @@ -260,37 +260,6 @@ u32 ddr_clktr(u32 default_val) { return (SDRAM_CLKTR_CLKP_90_DEG_ADV); } -/************************************************************************* - * pci_pre_init - * - * This routine is called just prior to registering the hose and gives - * the board the opportunity to check things. Returning a value of zero - * indicates that things are bad & PCI initialization should be aborted. - * - * Different boards may wish to customize the pci controller structure - * (add regions, override default access routines, etc) or perform - * certain pre-initialization actions. - * - ************************************************************************/ -#if defined(CONFIG_PCI) -int pci_pre_init(struct pci_controller * hose ) -{ - unsigned long strap; - - /*-------------------------------------------------------------------+ - * The katmai board is always configured as the host & requires the - * PCI arbiter to be enabled. - *-------------------------------------------------------------------*/ - mfsdr(SDR0_SDSTP1, strap); - if( (strap & SDR0_SDSTP1_PAE_MASK) == 0 ) { - printf("PCI: SDR0_STRP1[%08lX] - PCI Arbiter disabled.\n",strap); - return 0; - } - - return 1; -} -#endif /* defined(CONFIG_PCI) */ - #if defined(CONFIG_PCI) int board_pcie_card_present(int port) { diff --git a/board/amcc/kilauea/kilauea.c b/board/amcc/kilauea/kilauea.c index c4f8a6496..2f99ea113 100644 --- a/board/amcc/kilauea/kilauea.c +++ b/board/amcc/kilauea/kilauea.c @@ -285,25 +285,6 @@ int checkboard (void) return (0); } -/************************************************************************* - * pci_pre_init - * - * This routine is called just prior to registering the hose and gives - * the board the opportunity to check things. Returning a value of zero - * indicates that things are bad & PCI initialization should be aborted. - * - * Different boards may wish to customize the pci controller structure - * (add regions, override default access routines, etc) or perform - * certain pre-initialization actions. - * - ************************************************************************/ -#if defined(CONFIG_PCI) -int pci_pre_init(struct pci_controller * hose ) -{ - return 0; -} -#endif /* defined(CONFIG_PCI) */ - #if defined(CONFIG_POST) /* * Returns 1 if keys pressed to start the power-on long-running tests diff --git a/board/amcc/luan/luan.c b/board/amcc/luan/luan.c index e0b297e70..332d170d6 100644 --- a/board/amcc/luan/luan.c +++ b/board/amcc/luan/luan.c @@ -126,39 +126,6 @@ u32 ddr_clktr(u32 default_val) { return (SDRAM_CLKTR_CLKP_180_DEG_ADV); } -/************************************************************************* - * pci_pre_init - * - * This routine is called just prior to registering the hose and gives - * the board the opportunity to check things. Returning a value of zero - * indicates that things are bad & PCI initialization should be aborted. - * - * Different boards may wish to customize the pci controller structure - * (add regions, override default access routines, etc) or perform - * certain pre-initialization actions. - * - ************************************************************************/ -#if defined(CONFIG_PCI) -int pci_pre_init( struct pci_controller *hose ) -{ - unsigned long strap; - - /*--------------------------------------------------------------------------+ - * The luan board is always configured as the host & requires the - * PCI arbiter to be enabled. - *--------------------------------------------------------------------------*/ - mfsdr(SDR0_SDSTP1, strap); - if( (strap & SDR0_SDSTP1_PAE_MASK) == 0 ) { - printf("PCI: SDR0_STRP1[%08lX] - PCI Arbiter disabled.\n",strap); - - return 0; - } - - return 1; -} -#endif /* defined(CONFIG_PCI) */ - - /************************************************************************* * hw_watchdog_reset * diff --git a/board/amcc/makalu/makalu.c b/board/amcc/makalu/makalu.c index 43b9bc6ba..3d860af9a 100644 --- a/board/amcc/makalu/makalu.c +++ b/board/amcc/makalu/makalu.c @@ -237,25 +237,6 @@ int checkboard (void) return (0); } -/************************************************************************* - * pci_pre_init - * - * This routine is called just prior to registering the hose and gives - * the board the opportunity to check things. Returning a value of zero - * indicates that things are bad & PCI initialization should be aborted. - * - * Different boards may wish to customize the pci controller structure - * (add regions, override default access routines, etc) or perform - * certain pre-initialization actions. - * - ************************************************************************/ -#if defined(CONFIG_PCI) -int pci_pre_init(struct pci_controller * hose ) -{ - return 0; -} -#endif /* defined(CONFIG_PCI) */ - #if defined(CONFIG_POST) /* * Returns 1 if keys pressed to start the power-on long-running tests diff --git a/board/amcc/ocotea/ocotea.c b/board/amcc/ocotea/ocotea.c index b38f3cc40..951a8b539 100644 --- a/board/amcc/ocotea/ocotea.c +++ b/board/amcc/ocotea/ocotea.c @@ -275,38 +275,6 @@ long int fixed_sdram (void) } #endif /* !defined(CONFIG_SPD_EEPROM) */ - -/************************************************************************* - * pci_pre_init - * - * This routine is called just prior to registering the hose and gives - * the board the opportunity to check things. Returning a value of zero - * indicates that things are bad & PCI initialization should be aborted. - * - * Different boards may wish to customize the pci controller structure - * (add regions, override default access routines, etc) or perform - * certain pre-initialization actions. - * - ************************************************************************/ -#if defined(CONFIG_PCI) -int pci_pre_init(struct pci_controller * hose ) -{ - unsigned long strap; - - /*--------------------------------------------------------------------------+ - * The ocotea board is always configured as the host & requires the - * PCI arbiter to be enabled. - *--------------------------------------------------------------------------*/ - mfsdr(SDR0_SDSTP1, strap); - if( (strap & SDR0_SDSTP1_PAE_MASK) == 0 ){ - printf("PCI: SDR0_STRP1[%08lX] - PCI Arbiter disabled.\n",strap); - return 0; - } - - return 1; -} -#endif /* defined(CONFIG_PCI) */ - void fpga_init(void) { unsigned long group; diff --git a/board/amcc/sequoia/sequoia.c b/board/amcc/sequoia/sequoia.c index b8ef4e763..8c0a64761 100644 --- a/board/amcc/sequoia/sequoia.c +++ b/board/amcc/sequoia/sequoia.c @@ -364,69 +364,12 @@ int checkboard(void) /* * Assign interrupts to PCI devices. */ -void sequoia_pci_fixup_irq(struct pci_controller *hose, pci_dev_t dev) +void board_pci_fixup_irq(struct pci_controller *hose, pci_dev_t dev) { pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, VECNUM_EIRQ2); } #endif -/* - * pci_pre_init - * - * This routine is called just prior to registering the hose and gives - * the board the opportunity to check things. Returning a value of zero - * indicates that things are bad & PCI initialization should be aborted. - * - * Different boards may wish to customize the pci controller structure - * (add regions, override default access routines, etc) or perform - * certain pre-initialization actions. - */ -#if defined(CONFIG_PCI) -int pci_pre_init(struct pci_controller *hose) -{ - unsigned long addr; - - /* - * Set priority for all PLB3 devices to 0. - * Set PLB3 arbiter to fair mode. - */ - mfsdr(SD0_AMP1, addr); - mtsdr(SD0_AMP1, (addr & 0x000000FF) | 0x0000FF00); - addr = mfdcr(PLB3_ACR); - mtdcr(PLB3_ACR, addr | 0x80000000); - - /* - * Set priority for all PLB4 devices to 0. - */ - mfsdr(SD0_AMP0, addr); - mtsdr(SD0_AMP0, (addr & 0x000000FF) | 0x0000FF00); - addr = mfdcr(PLB4_ACR) | 0xa0000000; /* Was 0x8---- */ - mtdcr(PLB4_ACR, addr); - - /* - * Set Nebula PLB4 arbiter to fair mode. - */ - /* Segment0 */ - addr = (mfdcr(PLB0_ACR) & ~PLB0_ACR_PPM_MASK) | PLB0_ACR_PPM_FAIR; - addr = (addr & ~PLB0_ACR_HBU_MASK) | PLB0_ACR_HBU_ENABLED; - addr = (addr & ~PLB0_ACR_RDP_MASK) | PLB0_ACR_RDP_4DEEP; - addr = (addr & ~PLB0_ACR_WRP_MASK) | PLB0_ACR_WRP_2DEEP; - mtdcr(PLB0_ACR, addr); - - /* Segment1 */ - addr = (mfdcr(PLB1_ACR) & ~PLB1_ACR_PPM_MASK) | PLB1_ACR_PPM_FAIR; - addr = (addr & ~PLB1_ACR_HBU_MASK) | PLB1_ACR_HBU_ENABLED; - addr = (addr & ~PLB1_ACR_RDP_MASK) | PLB1_ACR_RDP_4DEEP; - addr = (addr & ~PLB1_ACR_WRP_MASK) | PLB1_ACR_WRP_2DEEP; - mtdcr(PLB1_ACR, addr); - -#ifdef CONFIG_PCI_PNP - hose->fixup_irq = sequoia_pci_fixup_irq; -#endif - return 1; -} -#endif /* defined(CONFIG_PCI) */ - #if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) void pci_master_init(struct pci_controller *hose) { diff --git a/board/amcc/taishan/taishan.c b/board/amcc/taishan/taishan.c index 574ff1a7b..279fae21c 100644 --- a/board/amcc/taishan/taishan.c +++ b/board/amcc/taishan/taishan.c @@ -209,37 +209,6 @@ int checkboard (void) return (0); } -/************************************************************************* - * pci_pre_init - * - * This routine is called just prior to registering the hose and gives - * the board the opportunity to check things. Returning a value of zero - * indicates that things are bad & PCI initialization should be aborted. - * - * Different boards may wish to customize the pci controller structure - * (add regions, override default access routines, etc) or perform - * certain pre-initialization actions. - * - ************************************************************************/ -#if defined(CONFIG_PCI) -int pci_pre_init(struct pci_controller * hose ) -{ - unsigned long strap; - - /*--------------------------------------------------------------------------+ - * The ocotea board is always configured as the host & requires the - * PCI arbiter to be enabled. - *--------------------------------------------------------------------------*/ - mfsdr(SDR0_SDSTP1, strap); - if( (strap & SDR0_SDSTP1_PAE_MASK) == 0 ){ - printf("PCI: SDR0_STRP1[%08lX] - PCI Arbiter disabled.\n",strap); - return 0; - } - - return 1; -} -#endif /* defined(CONFIG_PCI) */ - #ifdef CONFIG_POST /* * Returns 1 if keys pressed to start the power-on long-running tests diff --git a/board/amcc/yosemite/yosemite.c b/board/amcc/yosemite/yosemite.c index cd14a6a48..b6f8b7028 100644 --- a/board/amcc/yosemite/yosemite.c +++ b/board/amcc/yosemite/yosemite.c @@ -352,61 +352,6 @@ phys_size_t initdram(int board) return CONFIG_SYS_SDRAM_BANKS * (CONFIG_SYS_KBYTES_SDRAM * 1024); /* return bytes */ } -/************************************************************************* - * pci_pre_init - * - * This routine is called just prior to registering the hose and gives - * the board the opportunity to check things. Returning a value of zero - * indicates that things are bad & PCI initialization should be aborted. - * - * Different boards may wish to customize the pci controller structure - * (add regions, override default access routines, etc) or perform - * certain pre-initialization actions. - * - ************************************************************************/ -#if defined(CONFIG_PCI) -int pci_pre_init(struct pci_controller *hose) -{ - unsigned long addr; - - /*-------------------------------------------------------------------------+ - | Set priority for all PLB3 devices to 0. - | Set PLB3 arbiter to fair mode. - +-------------------------------------------------------------------------*/ - mfsdr(SD0_AMP1, addr); - mtsdr(SD0_AMP1, (addr & 0x000000FF) | 0x0000FF00); - addr = mfdcr(PLB3_ACR); - mtdcr(PLB3_ACR, addr | 0x80000000); - - /*-------------------------------------------------------------------------+ - | Set priority for all PLB4 devices to 0. - +-------------------------------------------------------------------------*/ - mfsdr(SD0_AMP0, addr); - mtsdr(SD0_AMP0, (addr & 0x000000FF) | 0x0000FF00); - addr = mfdcr(PLB4_ACR) | 0xa0000000; /* Was 0x8---- */ - mtdcr(PLB4_ACR, addr); - - /*-------------------------------------------------------------------------+ - | Set Nebula PLB4 arbiter to fair mode. - +-------------------------------------------------------------------------*/ - /* Segment0 */ - addr = (mfdcr(PLB0_ACR) & ~PLB0_ACR_PPM_MASK) | PLB0_ACR_PPM_FAIR; - addr = (addr & ~PLB0_ACR_HBU_MASK) | PLB0_ACR_HBU_ENABLED; - addr = (addr & ~PLB0_ACR_RDP_MASK) | PLB0_ACR_RDP_4DEEP; - addr = (addr & ~PLB0_ACR_WRP_MASK) | PLB0_ACR_WRP_2DEEP; - mtdcr(PLB0_ACR, addr); - - /* Segment1 */ - addr = (mfdcr(PLB1_ACR) & ~PLB1_ACR_PPM_MASK) | PLB1_ACR_PPM_FAIR; - addr = (addr & ~PLB1_ACR_HBU_MASK) | PLB1_ACR_HBU_ENABLED; - addr = (addr & ~PLB1_ACR_RDP_MASK) | PLB1_ACR_RDP_4DEEP; - addr = (addr & ~PLB1_ACR_WRP_MASK) | PLB1_ACR_WRP_2DEEP; - mtdcr(PLB1_ACR, addr); - - return 1; -} -#endif /* defined(CONFIG_PCI) */ - /************************************************************************* * pci_master_init * diff --git a/board/amcc/yucca/yucca.c b/board/amcc/yucca/yucca.c index 0ec26f14d..e0d19bcb6 100644 --- a/board/amcc/yucca/yucca.c +++ b/board/amcc/yucca/yucca.c @@ -588,37 +588,6 @@ u32 ddr_clktr(u32 default_val) { return default_val; } -/************************************************************************* - * pci_pre_init - * - * This routine is called just prior to registering the hose and gives - * the board the opportunity to check things. Returning a value of zero - * indicates that things are bad & PCI initialization should be aborted. - * - * Different boards may wish to customize the pci controller structure - * (add regions, override default access routines, etc) or perform - * certain pre-initialization actions. - * - ************************************************************************/ -#if defined(CONFIG_PCI) -int pci_pre_init(struct pci_controller * hose ) -{ - unsigned long strap; - - /*-------------------------------------------------------------------+ - * The yucca board is always configured as the host & requires the - * PCI arbiter to be enabled. - *-------------------------------------------------------------------*/ - mfsdr(SDR0_SDSTP1, strap); - if( (strap & SDR0_SDSTP1_PAE_MASK) == 0 ) { - printf("PCI: SDR0_STRP1[%08lX] - PCI Arbiter disabled.\n",strap); - return 0; - } - - return 1; -} -#endif /* defined(CONFIG_PCI) */ - #if defined(CONFIG_PCI) int board_pcie_card_present(int port) { diff --git a/board/esd/du440/du440.c b/board/esd/du440/du440.c index 866dcafcf..af50a1ef8 100644 --- a/board/esd/du440/du440.c +++ b/board/esd/du440/du440.c @@ -360,60 +360,6 @@ int checkboard(void) return (0); } -/* - * pci_pre_init - * - * This routine is called just prior to registering the hose and gives - * the board the opportunity to check things. Returning a value of zero - * indicates that things are bad & PCI initialization should be aborted. - * - * Different boards may wish to customize the pci controller structure - * (add regions, override default access routines, etc) or perform - * certain pre-initialization actions. - */ -#if defined(CONFIG_PCI) -int pci_pre_init(struct pci_controller *hose) -{ - unsigned long addr; - - /* - * Set priority for all PLB3 devices to 0. - * Set PLB3 arbiter to fair mode. - */ - mfsdr(SD0_AMP1, addr); - mtsdr(SD0_AMP1, (addr & 0x000000FF) | 0x0000FF00); - addr = mfdcr(PLB3_ACR); - mtdcr(PLB3_ACR, addr | 0x80000000); - - /* - * Set priority for all PLB4 devices to 0. - */ - mfsdr(SD0_AMP0, addr); - mtsdr(SD0_AMP0, (addr & 0x000000FF) | 0x0000FF00); - addr = mfdcr(PLB4_ACR) | 0xa0000000; /* Was 0x8---- */ - mtdcr(PLB4_ACR, addr); - - /* - * Set Nebula PLB4 arbiter to fair mode. - */ - /* Segment0 */ - addr = (mfdcr(PLB0_ACR) & ~PLB0_ACR_PPM_MASK) | PLB0_ACR_PPM_FAIR; - addr = (addr & ~PLB0_ACR_HBU_MASK) | PLB0_ACR_HBU_ENABLED; - addr = (addr & ~PLB0_ACR_RDP_MASK) | PLB0_ACR_RDP_4DEEP; - addr = (addr & ~PLB0_ACR_WRP_MASK) | PLB0_ACR_WRP_2DEEP; - mtdcr(PLB0_ACR, addr); - - /* Segment1 */ - addr = (mfdcr(PLB1_ACR) & ~PLB1_ACR_PPM_MASK) | PLB1_ACR_PPM_FAIR; - addr = (addr & ~PLB1_ACR_HBU_MASK) | PLB1_ACR_HBU_ENABLED; - addr = (addr & ~PLB1_ACR_RDP_MASK) | PLB1_ACR_RDP_4DEEP; - addr = (addr & ~PLB1_ACR_WRP_MASK) | PLB1_ACR_WRP_2DEEP; - mtdcr(PLB1_ACR, addr); - - return 1; -} -#endif /* defined(CONFIG_PCI) */ - #if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) void pci_master_init(struct pci_controller *hose) { diff --git a/board/esd/pmc440/pmc440.c b/board/esd/pmc440/pmc440.c index 10901b400..c5dc486cd 100644 --- a/board/esd/pmc440/pmc440.c +++ b/board/esd/pmc440/pmc440.c @@ -478,7 +478,7 @@ int checkboard(void) /* * Assign interrupts to PCI devices. Some OSs rely on this. */ -void pmc440_pci_fixup_irq(struct pci_controller *hose, pci_dev_t dev) +void board_pci_fixup_irq(struct pci_controller *hose, pci_dev_t dev) { unsigned char int_line[] = {IRQ_PCIC, IRQ_PCID, IRQ_PCIA, IRQ_PCIB}; @@ -487,64 +487,6 @@ void pmc440_pci_fixup_irq(struct pci_controller *hose, pci_dev_t dev) } #endif -/* - * pci_pre_init - * - * This routine is called just prior to registering the hose and gives - * the board the opportunity to check things. Returning a value of zero - * indicates that things are bad & PCI initialization should be aborted. - * - * Different boards may wish to customize the pci controller structure - * (add regions, override default access routines, etc) or perform - * certain pre-initialization actions. - */ -#if defined(CONFIG_PCI) -int pci_pre_init(struct pci_controller *hose) -{ - unsigned long addr; - - /* - * Set priority for all PLB3 devices to 0. - * Set PLB3 arbiter to fair mode. - */ - mfsdr(SD0_AMP1, addr); - mtsdr(SD0_AMP1, (addr & 0x000000FF) | 0x0000FF00); - addr = mfdcr(PLB3_ACR); - mtdcr(PLB3_ACR, addr | 0x80000000); - - /* - * Set priority for all PLB4 devices to 0. - */ - mfsdr(SD0_AMP0, addr); - mtsdr(SD0_AMP0, (addr & 0x000000FF) | 0x0000FF00); - addr = mfdcr(PLB4_ACR) | 0xa0000000; /* Was 0x8---- */ - mtdcr(PLB4_ACR, addr); - - /* - * Set Nebula PLB4 arbiter to fair mode. - */ - /* Segment0 */ - addr = (mfdcr(PLB0_ACR) & ~PLB0_ACR_PPM_MASK) | PLB0_ACR_PPM_FAIR; - addr = (addr & ~PLB0_ACR_HBU_MASK) | PLB0_ACR_HBU_ENABLED; - addr = (addr & ~PLB0_ACR_RDP_MASK) | PLB0_ACR_RDP_4DEEP; - addr = (addr & ~PLB0_ACR_WRP_MASK) | PLB0_ACR_WRP_2DEEP; - mtdcr(PLB0_ACR, addr); - - /* Segment1 */ - addr = (mfdcr(PLB1_ACR) & ~PLB1_ACR_PPM_MASK) | PLB1_ACR_PPM_FAIR; - addr = (addr & ~PLB1_ACR_HBU_MASK) | PLB1_ACR_HBU_ENABLED; - addr = (addr & ~PLB1_ACR_RDP_MASK) | PLB1_ACR_RDP_4DEEP; - addr = (addr & ~PLB1_ACR_WRP_MASK) | PLB1_ACR_WRP_2DEEP; - mtdcr(PLB1_ACR, addr); - -#ifdef CONFIG_PCI_PNP - hose->fixup_irq = pmc440_pci_fixup_irq; -#endif - - return 1; -} -#endif /* defined(CONFIG_PCI) */ - /* * pci_target_init * diff --git a/board/gdsys/gdppc440etx/gdppc440etx.c b/board/gdsys/gdppc440etx/gdppc440etx.c index b93a42015..10e146b42 100644 --- a/board/gdsys/gdppc440etx/gdppc440etx.c +++ b/board/gdsys/gdppc440etx/gdppc440etx.c @@ -29,6 +29,7 @@ #include #include #include +#include DECLARE_GLOBAL_DATA_PTR; @@ -158,55 +159,13 @@ int checkboard(void) } /* - * pci_pre_init - * - * This routine is called just prior to registering the hose and gives - * the board the opportunity to check things. Returning a value of zero - * indicates that things are bad & PCI initialization should be aborted. - * - * Different boards may wish to customize the pci controller structure - * (add regions, override default access routines, etc) or perform - * certain pre-initialization actions. - * + * Override weak pci_pre_init() */ #if defined(CONFIG_PCI) int pci_pre_init(struct pci_controller *hose) { - unsigned long addr; - - /* - * Set priority for all PLB3 devices to 0. - * Set PLB3 arbiter to fair mode. - */ - mfsdr(SD0_AMP1, addr); - mtsdr(SD0_AMP1, (addr & 0x000000FF) | 0x0000FF00); - addr = mfdcr(PLB3_ACR); - mtdcr(PLB3_ACR, addr | 0x80000000); - - /* - * Set priority for all PLB4 devices to 0. - */ - mfsdr(SD0_AMP0, addr); - mtsdr(SD0_AMP0, (addr & 0x000000FF) | 0x0000FF00); - addr = mfdcr(PLB4_ACR) | 0xa0000000; /* Was 0x8---- */ - mtdcr(PLB4_ACR, addr); - - /* - * Set Nebula PLB4 arbiter to fair mode. - */ - /* Segment0 */ - addr = (mfdcr(PLB0_ACR) & ~PLB0_ACR_PPM_MASK) | PLB0_ACR_PPM_FAIR; - addr = (addr & ~PLB0_ACR_HBU_MASK) | PLB0_ACR_HBU_ENABLED; - addr = (addr & ~PLB0_ACR_RDP_MASK) | PLB0_ACR_RDP_4DEEP; - addr = (addr & ~PLB0_ACR_WRP_MASK) | PLB0_ACR_WRP_2DEEP; - mtdcr(PLB0_ACR, addr); - - /* Segment1 */ - addr = (mfdcr(PLB1_ACR) & ~PLB1_ACR_PPM_MASK) | PLB1_ACR_PPM_FAIR; - addr = (addr & ~PLB1_ACR_HBU_MASK) | PLB1_ACR_HBU_ENABLED; - addr = (addr & ~PLB1_ACR_RDP_MASK) | PLB1_ACR_RDP_4DEEP; - addr = (addr & ~PLB1_ACR_WRP_MASK) | PLB1_ACR_WRP_2DEEP; - mtdcr(PLB1_ACR, addr); + /* First call common code */ + __pci_pre_init(hose); /* enable 66 MHz ext. Clock */ out32(GPIO1_TCR, in32(GPIO1_TCR) | 0x00008000); diff --git a/board/korat/korat.c b/board/korat/korat.c index 02ebfdf37..78ccb1122 100644 --- a/board/korat/korat.c +++ b/board/korat/korat.c @@ -595,70 +595,12 @@ int checkboard(void) /* * Assign interrupts to PCI devices. */ -void korat_pci_fixup_irq(struct pci_controller *hose, pci_dev_t dev) +void board_pci_fixup_irq(struct pci_controller *hose, pci_dev_t dev) { pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, VECNUM_EIRQ2); } #endif -/* - * pci_pre_init - * - * This routine is called just prior to registering the hose and gives - * the board the opportunity to check things. Returning a value of zero - * indicates that things are bad & PCI initialization should be aborted. - * - * Different boards may wish to customize the pci controller structure - * (add regions, override default access routines, etc) or perform - * certain pre-initialization actions. - */ -#if defined(CONFIG_PCI) -int pci_pre_init(struct pci_controller *hose) -{ - unsigned long addr; - - /* - * Set priority for all PLB3 devices to 0. - * Set PLB3 arbiter to fair mode. - */ - mfsdr(SD0_AMP1, addr); - mtsdr(SD0_AMP1, (addr & 0x000000FF) | 0x0000FF00); - addr = mfdcr(PLB3_ACR); - mtdcr(PLB3_ACR, addr | 0x80000000); - - /* - * Set priority for all PLB4 devices to 0. - */ - mfsdr(SD0_AMP0, addr); - mtsdr(SD0_AMP0, (addr & 0x000000FF) | 0x0000FF00); - addr = mfdcr(PLB4_ACR) | 0xa0000000; /* Was 0x8---- */ - mtdcr(PLB4_ACR, addr); - - /* - * Set Nebula PLB4 arbiter to fair mode. - */ - /* Segment0 */ - addr = (mfdcr(PLB0_ACR) & ~PLB0_ACR_PPM_MASK) | PLB0_ACR_PPM_FAIR; - addr = (addr & ~PLB0_ACR_HBU_MASK) | PLB0_ACR_HBU_ENABLED; - addr = (addr & ~PLB0_ACR_RDP_MASK) | PLB0_ACR_RDP_4DEEP; - addr = (addr & ~PLB0_ACR_WRP_MASK) | PLB0_ACR_WRP_2DEEP; - mtdcr(PLB0_ACR, addr); - - /* Segment1 */ - addr = (mfdcr(PLB1_ACR) & ~PLB1_ACR_PPM_MASK) | PLB1_ACR_PPM_FAIR; - addr = (addr & ~PLB1_ACR_HBU_MASK) | PLB1_ACR_HBU_ENABLED; - addr = (addr & ~PLB1_ACR_RDP_MASK) | PLB1_ACR_RDP_4DEEP; - addr = (addr & ~PLB1_ACR_WRP_MASK) | PLB1_ACR_WRP_2DEEP; - mtdcr(PLB1_ACR, addr); - -#if defined(CONFIG_PCI_PNP) - hose->fixup_irq = korat_pci_fixup_irq; -#endif - - return 1; -} -#endif /* defined(CONFIG_PCI) */ - /* * pci_target_init * diff --git a/board/lwmon5/lwmon5.c b/board/lwmon5/lwmon5.c index 77f2d7f68..bd29437a2 100644 --- a/board/lwmon5/lwmon5.c +++ b/board/lwmon5/lwmon5.c @@ -275,61 +275,6 @@ int checkboard(void) return (0); } -/************************************************************************* - * pci_pre_init - * - * This routine is called just prior to registering the hose and gives - * the board the opportunity to check things. Returning a value of zero - * indicates that things are bad & PCI initialization should be aborted. - * - * Different boards may wish to customize the pci controller structure - * (add regions, override default access routines, etc) or perform - * certain pre-initialization actions. - * - ************************************************************************/ -#if defined(CONFIG_PCI) -int pci_pre_init(struct pci_controller *hose) -{ - unsigned long addr; - - /*-------------------------------------------------------------------------+ - | Set priority for all PLB3 devices to 0. - | Set PLB3 arbiter to fair mode. - +-------------------------------------------------------------------------*/ - mfsdr(SD0_AMP1, addr); - mtsdr(SD0_AMP1, (addr & 0x000000FF) | 0x0000FF00); - addr = mfdcr(PLB3_ACR); - mtdcr(PLB3_ACR, addr | 0x80000000); - - /*-------------------------------------------------------------------------+ - | Set priority for all PLB4 devices to 0. - +-------------------------------------------------------------------------*/ - mfsdr(SD0_AMP0, addr); - mtsdr(SD0_AMP0, (addr & 0x000000FF) | 0x0000FF00); - addr = mfdcr(PLB4_ACR) | 0xa0000000; /* Was 0x8---- */ - mtdcr(PLB4_ACR, addr); - - /*-------------------------------------------------------------------------+ - | Set Nebula PLB4 arbiter to fair mode. - +-------------------------------------------------------------------------*/ - /* Segment0 */ - addr = (mfdcr(PLB0_ACR) & ~PLB0_ACR_PPM_MASK) | PLB0_ACR_PPM_FAIR; - addr = (addr & ~PLB0_ACR_HBU_MASK) | PLB0_ACR_HBU_ENABLED; - addr = (addr & ~PLB0_ACR_RDP_MASK) | PLB0_ACR_RDP_4DEEP; - addr = (addr & ~PLB0_ACR_WRP_MASK) | PLB0_ACR_WRP_2DEEP; - mtdcr(PLB0_ACR, addr); - - /* Segment1 */ - addr = (mfdcr(PLB1_ACR) & ~PLB1_ACR_PPM_MASK) | PLB1_ACR_PPM_FAIR; - addr = (addr & ~PLB1_ACR_HBU_MASK) | PLB1_ACR_HBU_ENABLED; - addr = (addr & ~PLB1_ACR_RDP_MASK) | PLB1_ACR_RDP_4DEEP; - addr = (addr & ~PLB1_ACR_WRP_MASK) | PLB1_ACR_WRP_2DEEP; - mtdcr(PLB1_ACR, addr); - - return 1; -} -#endif /* defined(CONFIG_PCI) */ - /************************************************************************* * pci_master_init * diff --git a/board/pcs440ep/pcs440ep.c b/board/pcs440ep/pcs440ep.c index 929375987..e7c575d8a 100644 --- a/board/pcs440ep/pcs440ep.c +++ b/board/pcs440ep/pcs440ep.c @@ -550,61 +550,6 @@ phys_size_t initdram (int board_type) return dram_size; } -/************************************************************************* - * pci_pre_init - * - * This routine is called just prior to registering the hose and gives - * the board the opportunity to check things. Returning a value of zero - * indicates that things are bad & PCI initialization should be aborted. - * - * Different boards may wish to customize the pci controller structure - * (add regions, override default access routines, etc) or perform - * certain pre-initialization actions. - * - ************************************************************************/ -#if defined(CONFIG_PCI) -int pci_pre_init(struct pci_controller *hose) -{ - unsigned long addr; - - /*-------------------------------------------------------------------------+ - | Set priority for all PLB3 devices to 0. - | Set PLB3 arbiter to fair mode. - +-------------------------------------------------------------------------*/ - mfsdr(SD0_AMP1, addr); - mtsdr(SD0_AMP1, (addr & 0x000000FF) | 0x0000FF00); - addr = mfdcr(PLB3_ACR); - mtdcr(PLB3_ACR, addr | 0x80000000); - - /*-------------------------------------------------------------------------+ - | Set priority for all PLB4 devices to 0. - +-------------------------------------------------------------------------*/ - mfsdr(SD0_AMP0, addr); - mtsdr(SD0_AMP0, (addr & 0x000000FF) | 0x0000FF00); - addr = mfdcr(PLB4_ACR) | 0xa0000000; /* Was 0x8---- */ - mtdcr(PLB4_ACR, addr); - - /*-------------------------------------------------------------------------+ - | Set Nebula PLB4 arbiter to fair mode. - +-------------------------------------------------------------------------*/ - /* Segment0 */ - addr = (mfdcr(PLB0_ACR) & ~PLB0_ACR_PPM_MASK) | PLB0_ACR_PPM_FAIR; - addr = (addr & ~PLB0_ACR_HBU_MASK) | PLB0_ACR_HBU_ENABLED; - addr = (addr & ~PLB0_ACR_RDP_MASK) | PLB0_ACR_RDP_4DEEP; - addr = (addr & ~PLB0_ACR_WRP_MASK) | PLB0_ACR_WRP_2DEEP; - mtdcr(PLB0_ACR, addr); - - /* Segment1 */ - addr = (mfdcr(PLB1_ACR) & ~PLB1_ACR_PPM_MASK) | PLB1_ACR_PPM_FAIR; - addr = (addr & ~PLB1_ACR_HBU_MASK) | PLB1_ACR_HBU_ENABLED; - addr = (addr & ~PLB1_ACR_RDP_MASK) | PLB1_ACR_RDP_4DEEP; - addr = (addr & ~PLB1_ACR_WRP_MASK) | PLB1_ACR_WRP_2DEEP; - mtdcr(PLB1_ACR, addr); - - return 1; -} -#endif /* defined(CONFIG_PCI) */ - /************************************************************************* * pci_master_init * diff --git a/board/prodrive/alpr/alpr.c b/board/prodrive/alpr/alpr.c index c06aadb41..66153279f 100644 --- a/board/prodrive/alpr/alpr.c +++ b/board/prodrive/alpr/alpr.c @@ -29,6 +29,7 @@ #include #include #include +#include DECLARE_GLOBAL_DATA_PTR; @@ -144,39 +145,20 @@ int checkboard (void) return (0); } -/************************************************************************* - * pci_pre_init - * - * This routine is called just prior to registering the hose and gives - * the board the opportunity to check things. Returning a value of zero - * indicates that things are bad & PCI initialization should be aborted. - * - * Different boards may wish to customize the pci controller structure - * (add regions, override default access routines, etc) or perform - * certain pre-initialization actions. - * - ************************************************************************/ #if defined(CONFIG_PCI) -int pci_pre_init(struct pci_controller * hose ) +/* + * Override weak pci_pre_init() + */ +int pci_pre_init(struct pci_controller *hose) { - unsigned long strap; - - /*--------------------------------------------------------------------------+ - * The ocotea board is always configured as the host & requires the - * PCI arbiter to be enabled. - *--------------------------------------------------------------------------*/ - mfsdr(SDR0_SDSTP1, strap); - if( (strap & SDR0_SDSTP1_PAE_MASK) == 0 ){ - printf("PCI: SDR0_STRP1[%08lX] - PCI Arbiter disabled.\n",strap); + if (__pci_pre_init(hose) == 0) return 0; - } /* FPGA Init */ - alpr_fpga_init (); + alpr_fpga_init(); return 1; } -#endif /* defined(CONFIG_PCI) */ /************************************************************************* * Override weak is_pci_host() @@ -193,8 +175,6 @@ int pci_pre_init(struct pci_controller * hose ) * * ************************************************************************/ -#if defined(CONFIG_PCI) - static void wait_for_pci_ready(void) { /* diff --git a/board/prodrive/p3p440/p3p440.c b/board/prodrive/p3p440/p3p440.c index 5761e7084..020f66dd8 100644 --- a/board/prodrive/p3p440/p3p440.c +++ b/board/prodrive/p3p440/p3p440.c @@ -164,37 +164,6 @@ int misc_init_r (void) return 0; } -/************************************************************************* - * pci_pre_init - * - * This routine is called just prior to registering the hose and gives - * the board the opportunity to check things. Returning a value of zero - * indicates that things are bad & PCI initialization should be aborted. - * - * Different boards may wish to customize the pci controller structure - * (add regions, override default access routines, etc) or perform - * certain pre-initialization actions. - * - ************************************************************************/ -#if defined(CONFIG_PCI) -int pci_pre_init(struct pci_controller *hose) -{ - unsigned long strap; - - /*--------------------------------------------------------------------------+ - * The P3P440 board is always configured as the host & requires the - * PCI arbiter to be disabled because it's an PMC module. - *--------------------------------------------------------------------------*/ - strap = mfdcr(CPC0_STRP1); - if (strap & 0x00100000) { - printf("PCI: CPC0_STRP1[PAE] set.\n"); - return 0; - } - - return 1; -} -#endif /* defined(CONFIG_PCI) */ - /************************************************************************* * Override weak is_pci_host() * diff --git a/board/sandburst/common/sb_common.c b/board/sandburst/common/sb_common.c index 45e904385..6b910743d 100644 --- a/board/sandburst/common/sb_common.c +++ b/board/sandburst/common/sb_common.c @@ -300,38 +300,6 @@ long int fixed_sdram (void) } #endif /* !defined(CONFIG_SPD_EEPROM) */ - -/************************************************************************* - * pci_pre_init - * - * This routine is called just prior to registering the hose and gives - * the board the opportunity to check things. Returning a value of zero - * indicates that things are bad & PCI initialization should be aborted. - * - * Different boards may wish to customize the pci controller structure - * (add regions, override default access routines, etc) or perform - * certain pre-initialization actions. - * - ************************************************************************/ -#if defined(CONFIG_PCI) -int pci_pre_init(struct pci_controller * hose ) -{ - unsigned long strap; - - /*--------------------------------------------------------------------------+ - * The metrobox is always configured as the host & requires the - * PCI arbiter to be enabled. - *--------------------------------------------------------------------------*/ - mfsdr(SDR0_SDSTP1, strap); - if( (strap & SDR0_SDSTP1_PAE_MASK) == 0 ){ - printf("PCI: SDR0_STRP1[%08lX] - PCI Arbiter disabled.\n",strap); - return 0; - } - - return 1; -} -#endif /* defined(CONFIG_PCI) */ - /************************************************************************* * board_get_enetaddr * diff --git a/board/xes/xpedite1000/xpedite1000.c b/board/xes/xpedite1000/xpedite1000.c index db37ca051..b4cbb2fce 100644 --- a/board/xes/xpedite1000/xpedite1000.c +++ b/board/xes/xpedite1000/xpedite1000.c @@ -136,6 +136,8 @@ phys_size_t initdram(int board_type) } /* + * Override weak pci_pre_init() + * * This routine is called just prior to registering the hose and gives * the board the opportunity to check things. Returning a value of zero * indicates that things are bad & PCI initialization should be aborted. @@ -144,7 +146,6 @@ phys_size_t initdram(int board_type) * (add regions, override default access routines, etc) or perform * certain pre-initialization actions. */ - #if defined(CONFIG_PCI) int pci_pre_init(struct pci_controller * hose) { diff --git a/cpu/ppc4xx/4xx_pci.c b/cpu/ppc4xx/4xx_pci.c index 20e134b63..01b9cf721 100644 --- a/cpu/ppc4xx/4xx_pci.c +++ b/cpu/ppc4xx/4xx_pci.c @@ -73,9 +73,7 @@ #include #include -#if !defined(CONFIG_440) #include -#endif #include #include #include @@ -84,13 +82,21 @@ DECLARE_GLOBAL_DATA_PTR; +#if defined(CONFIG_405GP) || defined(CONFIG_405EP) + +#if defined(CONFIG_PMC405) +ushort pmc405_pci_subsys_deviceid(void); +#endif + +/*#define DEBUG*/ + /* * Board-specific pci initialization * Platform code can reimplement pci_pre_init() if needed */ int __pci_pre_init(struct pci_controller *hose) { -#if defined (CONFIG_405EP) +#if defined(CONFIG_405EP) /* * Enable the internal PCI arbiter by default. * @@ -106,15 +112,8 @@ int __pci_pre_init(struct pci_controller *hose) return 1; } -int pci_pre_init(struct pci_controller *hose) __attribute__((weak, alias("__pci_pre_init"))); - -#if defined(CONFIG_405GP) || defined(CONFIG_405EP) - -#if defined(CONFIG_PMC405) -ushort pmc405_pci_subsys_deviceid(void); -#endif - -/*#define DEBUG*/ +int pci_pre_init(struct pci_controller *hose) + __attribute__((weak, alias("__pci_pre_init"))); int __is_pci_host(struct pci_controller *hose) { @@ -232,7 +231,7 @@ void pci_405gp_init(struct pci_controller *hose) pciauto_region_init(hose->pci_fb); /* Let board change/modify hose & do initial checks */ - if (pci_pre_init (hose) == 0) { + if (pci_pre_init(hose) == 0) { printf("PCI: Board-specific initialization failed.\n"); printf("PCI: Configuration aborted.\n"); return; @@ -500,16 +499,17 @@ int __is_pci_host(struct pci_controller *hose) int is_pci_host(struct pci_controller *hose) __attribute__((weak, alias("__is_pci_host"))); +#if defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \ + defined(CONFIG_440GR) || defined(CONFIG_440GRX) + +#if defined(CONFIG_SYS_PCI_TARGET_INIT) /* - * pci_target_init + * pci_target_init * - * The bootstrap configuration provides default settings for the pci - * inbound map (PIM). But the bootstrap config choices are limited and - * may not be sufficient for a given board. + * The bootstrap configuration provides default settings for the pci + * inbound map (PIM). But the bootstrap config choices are limited and + * may not be sufficient for a given board. */ -#if defined(CONFIG_SYS_PCI_TARGET_INIT) -#if defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \ - defined(CONFIG_440GR) || defined(CONFIG_440GRX) void __pci_target_init(struct pci_controller *hose) { /* @@ -570,7 +570,68 @@ void __pci_target_init(struct pci_controller *hose) pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101); } +#endif /* CONFIG_SYS_PCI_TARGET_INIT */ + +/* + * pci_pre_init + * + * This routine is called just prior to registering the hose and gives + * the board the opportunity to check things. Returning a value of zero + * indicates that things are bad & PCI initialization should be aborted. + * + * Different boards may wish to customize the pci controller structure + * (add regions, override default access routines, etc) or perform + * certain pre-initialization actions. + * + */ +int __pci_pre_init(struct pci_controller *hose) +{ + u32 reg; + + /* + * Set priority for all PLB3 devices to 0. + * Set PLB3 arbiter to fair mode. + */ + mfsdr(SD0_AMP1, reg); + mtsdr(SD0_AMP1, (reg & 0x000000FF) | 0x0000FF00); + reg = mfdcr(PLB3_ACR); + mtdcr(PLB3_ACR, reg | 0x80000000); + + /* + * Set priority for all PLB4 devices to 0. + */ + mfsdr(SD0_AMP0, reg); + mtsdr(SD0_AMP0, (reg & 0x000000FF) | 0x0000FF00); + reg = mfdcr(PLB4_ACR) | 0xa0000000; + mtdcr(PLB4_ACR, reg); + + /* + * Set Nebula PLB4 arbiter to fair mode. + */ + /* Segment0 */ + reg = (mfdcr(PLB0_ACR) & ~PLB0_ACR_PPM_MASK) | PLB0_ACR_PPM_FAIR; + reg = (reg & ~PLB0_ACR_HBU_MASK) | PLB0_ACR_HBU_ENABLED; + reg = (reg & ~PLB0_ACR_RDP_MASK) | PLB0_ACR_RDP_4DEEP; + reg = (reg & ~PLB0_ACR_WRP_MASK) | PLB0_ACR_WRP_2DEEP; + mtdcr(PLB0_ACR, reg); + + /* Segment1 */ + reg = (mfdcr(PLB1_ACR) & ~PLB1_ACR_PPM_MASK) | PLB1_ACR_PPM_FAIR; + reg = (reg & ~PLB1_ACR_HBU_MASK) | PLB1_ACR_HBU_ENABLED; + reg = (reg & ~PLB1_ACR_RDP_MASK) | PLB1_ACR_RDP_4DEEP; + reg = (reg & ~PLB1_ACR_WRP_MASK) | PLB1_ACR_WRP_2DEEP; + mtdcr(PLB1_ACR, reg); + +#if defined(CONFIG_SYS_PCI_BOARD_FIXUP_IRQ) + hose->fixup_irq = board_pci_fixup_irq; +#endif + + return 1; +} + #else /* defined(CONFIG_440EP) ... */ + +#if defined(CONFIG_SYS_PCI_TARGET_INIT) void __pci_target_init(struct pci_controller * hose) { /* @@ -599,11 +660,31 @@ void __pci_target_init(struct pci_controller * hose) out_le16((void *)PCIL0_CMD, in_le16((void *)PCIL0_CMD) | PCI_COMMAND_MEMORY); } +#endif /* CONFIG_SYS_PCI_TARGET_INIT */ + +int __pci_pre_init(struct pci_controller *hose) +{ + /* + * This board is always configured as the host & requires the + * PCI arbiter to be enabled. + */ + if (!pci_arbiter_enabled()) { + printf("PCI: PCI Arbiter disabled!\n"); + return 0; + } + + return 1; +} + #endif /* defined(CONFIG_440EP) ... */ + +#if defined(CONFIG_SYS_PCI_TARGET_INIT) void pci_target_init(struct pci_controller * hose) __attribute__((weak, alias("__pci_target_init"))); +#endif /* CONFIG_SYS_PCI_TARGET_INIT */ -#endif /* defined(CONFIG_SYS_PCI_TARGET_INIT) */ +int pci_pre_init(struct pci_controller *hose) + __attribute__((weak, alias("__pci_pre_init"))); int pci_440_init (struct pci_controller *hose) { @@ -674,7 +755,7 @@ int pci_440_init (struct pci_controller *hose) pci_setup_indirect(hose, PCIL0_CFGADR, PCIL0_CFGDATA); /* Let board change/modify hose & do initial checks */ - if (pci_pre_init (hose) == 0) { + if (pci_pre_init(hose) == 0) { printf("PCI: Board-specific initialization failed.\n"); printf("PCI: Configuration aborted.\n"); return -1; diff --git a/cpu/ppc4xx/cpu.c b/cpu/ppc4xx/cpu.c index e1b00a74c..73d4d06af 100644 --- a/cpu/ppc4xx/cpu.c +++ b/cpu/ppc4xx/cpu.c @@ -81,7 +81,7 @@ static int pci_async_enabled(void) #if defined(CONFIG_PCI) && !defined(CONFIG_IOP480) && \ !defined(CONFIG_405) && !defined(CONFIG_405EX) -static int pci_arbiter_enabled(void) +int pci_arbiter_enabled(void) { #if defined(CONFIG_405GP) return (mfdcr(CPC0_PSR) & PSR_PCI_ARBIT_EN); diff --git a/include/asm-ppc/4xx_pci.h b/include/asm-ppc/4xx_pci.h index 5400a035e..31769901c 100644 --- a/include/asm-ppc/4xx_pci.h +++ b/include/asm-ppc/4xx_pci.h @@ -1,6 +1,8 @@ #ifndef _405GP_PCI_H #define _405GP_PCI_H +#include + /*----------------------------------------------------------------------------+ | 405GP PCI core memory map defines. +----------------------------------------------------------------------------*/ @@ -49,6 +51,9 @@ #define PCIDEVID_405GP 0x0 +void board_pci_fixup_irq(struct pci_controller *hose, pci_dev_t dev); +int pci_arbiter_enabled(void); +int __pci_pre_init(struct pci_controller *hose); void __pci_target_init(struct pci_controller *hose); #endif diff --git a/include/configs/PMC440.h b/include/configs/PMC440.h index d2c5188a6..ac5584c10 100644 --- a/include/configs/PMC440.h +++ b/include/configs/PMC440.h @@ -435,6 +435,7 @@ /* Board-specific PCI */ #define CONFIG_SYS_PCI_TARGET_INIT #define CONFIG_SYS_PCI_MASTER_INIT +#define CONFIG_SYS_PCI_BOARD_FIXUP_IRQ /* PCI identification */ #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x12FE /* PCI Vendor ID: esd gmbh */ diff --git a/include/configs/korat.h b/include/configs/korat.h index 7e74ef705..026dd0854 100644 --- a/include/configs/korat.h +++ b/include/configs/korat.h @@ -360,6 +360,7 @@ /* Board-specific PCI */ #define CONFIG_SYS_PCI_TARGET_INIT #define CONFIG_SYS_PCI_MASTER_INIT +#define CONFIG_SYS_PCI_BOARD_FIXUP_IRQ #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */ #define CONFIG_SYS_PCI_SUBSYS_ID 0xcafe /* Whatever */ diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h index 9605ce25b..5788d581a 100644 --- a/include/configs/sequoia.h +++ b/include/configs/sequoia.h @@ -364,6 +364,7 @@ /* Board-specific PCI */ #define CONFIG_SYS_PCI_TARGET_INIT #define CONFIG_SYS_PCI_MASTER_INIT +#define CONFIG_SYS_PCI_BOARD_FIXUP_IRQ #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */ #define CONFIG_SYS_PCI_SUBSYS_ID 0xcafe /* Whatever */ diff --git a/include/ppc440.h b/include/ppc440.h index e54a977dc..a050ffd1c 100644 --- a/include/ppc440.h +++ b/include/ppc440.h @@ -1276,7 +1276,8 @@ #define CPC0_STRP1_PAE_MASK (0x80000000 >> 11) #define CPC0_STRP1_PISE_MASK (0x80000000 >> 13) #endif /* defined(CONFIG_440GP) */ -#if defined(CONFIG_440GX) || defined(CONFIG_440SP) +#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || \ + defined(CONFIG_460EX) || defined(CONFIG_460GT) #define SDR0_SDSTP1_PAE_MASK (0x80000000 >> 13) #define SDR0_SDSTP1_PISE_MASK (0x80000000 >> 15) #endif /* defined(CONFIG_440GX) || defined(CONFIG_440SP) */ -- cgit v1.2.3 From 6c70049bd14e8e81764570732be7f34a89831f09 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Thu, 12 Nov 2009 17:19:37 +0100 Subject: ppc4xx: Consolidate pci_master_init() function This patch removes the duplicted implementations of the pci_master_init() function by introducing a weak default function for it. It can be overridden by a board specific version. Signed-off-by: Stefan Roese --- board/amcc/bamboo/bamboo.c | 21 --------------------- board/amcc/sequoia/sequoia.c | 17 ----------------- board/amcc/yosemite/yosemite.c | 21 --------------------- board/esd/du440/du440.c | 17 ----------------- board/esd/pmc440/pmc440.c | 18 ++++++------------ board/gdsys/gdppc440etx/gdppc440etx.c | 21 --------------------- board/korat/korat.c | 17 ----------------- board/lwmon5/lwmon5.c | 21 --------------------- board/netstal/hcu5/hcu5.c | 21 +++++++-------------- board/pcs440ep/pcs440ep.c | 21 --------------------- cpu/ppc4xx/4xx_pci.c | 18 ++++++++++++++++++ include/asm-ppc/4xx_pci.h | 1 + 12 files changed, 32 insertions(+), 182 deletions(-) (limited to 'board') diff --git a/board/amcc/bamboo/bamboo.c b/board/amcc/bamboo/bamboo.c index 7c34c4445..c90f86b8d 100644 --- a/board/amcc/bamboo/bamboo.c +++ b/board/amcc/bamboo/bamboo.c @@ -466,27 +466,6 @@ phys_size_t initdram (int board_type) #endif } -/************************************************************************* - * pci_master_init - * - ************************************************************************/ -#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) -void pci_master_init(struct pci_controller *hose) -{ - unsigned short temp_short; - - /*--------------------------------------------------------------------------+ - | Write the PowerPC440 EP PCI Configuration regs. - | Enable PowerPC440 EP to be a master on the PCI bus (PMM). - | Enable PowerPC440 EP to act as a PCI memory target (PTM). - +--------------------------------------------------------------------------*/ - pci_read_config_word(0, PCI_COMMAND, &temp_short); - pci_write_config_word(0, PCI_COMMAND, - temp_short | PCI_COMMAND_MASTER | - PCI_COMMAND_MEMORY); -} -#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) */ - /*----------------------------------------------------------------------------+ | is_powerpc440ep_pass1. +----------------------------------------------------------------------------*/ diff --git a/board/amcc/sequoia/sequoia.c b/board/amcc/sequoia/sequoia.c index 8c0a64761..cb34c9d7d 100644 --- a/board/amcc/sequoia/sequoia.c +++ b/board/amcc/sequoia/sequoia.c @@ -370,23 +370,6 @@ void board_pci_fixup_irq(struct pci_controller *hose, pci_dev_t dev) } #endif -#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) -void pci_master_init(struct pci_controller *hose) -{ - unsigned short temp_short; - - /* - * Write the PowerPC440 EP PCI Configuration regs. - * Enable PowerPC440 EP to be a master on the PCI bus (PMM). - * Enable PowerPC440 EP to act as a PCI memory target (PTM). - */ - pci_read_config_word(0, PCI_COMMAND, &temp_short); - pci_write_config_word(0, PCI_COMMAND, - temp_short | PCI_COMMAND_MASTER | - PCI_COMMAND_MEMORY); -} -#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) */ - #if defined(CONFIG_POST) /* * Returns 1 if keys pressed to start the power-on long-running tests diff --git a/board/amcc/yosemite/yosemite.c b/board/amcc/yosemite/yosemite.c index b6f8b7028..98c1f3b81 100644 --- a/board/amcc/yosemite/yosemite.c +++ b/board/amcc/yosemite/yosemite.c @@ -352,27 +352,6 @@ phys_size_t initdram(int board) return CONFIG_SYS_SDRAM_BANKS * (CONFIG_SYS_KBYTES_SDRAM * 1024); /* return bytes */ } -/************************************************************************* - * pci_master_init - * - ************************************************************************/ -#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) -void pci_master_init(struct pci_controller *hose) -{ - unsigned short temp_short; - - /*--------------------------------------------------------------------------+ - | Write the PowerPC440 EP PCI Configuration regs. - | Enable PowerPC440 EP to be a master on the PCI bus (PMM). - | Enable PowerPC440 EP to act as a PCI memory target (PTM). - +--------------------------------------------------------------------------*/ - pci_read_config_word(0, PCI_COMMAND, &temp_short); - pci_write_config_word(0, PCI_COMMAND, - temp_short | PCI_COMMAND_MASTER | - PCI_COMMAND_MEMORY); -} -#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) */ - /************************************************************************* * hw_watchdog_reset * diff --git a/board/esd/du440/du440.c b/board/esd/du440/du440.c index af50a1ef8..111cce52a 100644 --- a/board/esd/du440/du440.c +++ b/board/esd/du440/du440.c @@ -360,23 +360,6 @@ int checkboard(void) return (0); } -#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) -void pci_master_init(struct pci_controller *hose) -{ - unsigned short temp_short; - - /* - * Write the PowerPC440 EP PCI Configuration regs. - * Enable PowerPC440 EP to be a master on the PCI bus (PMM). - * Enable PowerPC440 EP to act as a PCI memory target (PTM). - */ - pci_read_config_word(0, PCI_COMMAND, &temp_short); - pci_write_config_word(0, PCI_COMMAND, - temp_short | PCI_COMMAND_MASTER | - PCI_COMMAND_MEMORY); -} -#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) */ - int last_stage_init(void) { int e, i; diff --git a/board/esd/pmc440/pmc440.c b/board/esd/pmc440/pmc440.c index c5dc486cd..d0ff080fa 100644 --- a/board/esd/pmc440/pmc440.c +++ b/board/esd/pmc440/pmc440.c @@ -39,6 +39,8 @@ #include #endif #include +#include + #include "fpga.h" #include "pmc440.h" @@ -600,24 +602,16 @@ void pci_target_init(struct pci_controller *hose) #endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ /* - * pci_master_init + * Override weak default pci_master_init() */ #if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) void pci_master_init(struct pci_controller *hose) { - unsigned short temp_short; - /* - * Write the PowerPC440 EP PCI Configuration regs. - * Enable PowerPC440 EP to be a master on the PCI bus (PMM). - * Enable PowerPC440 EP to act as a PCI memory target (PTM). + * Only configure the master in monach mode */ - if (is_monarch()) { - pci_read_config_word(0, PCI_COMMAND, &temp_short); - pci_write_config_word(0, PCI_COMMAND, - temp_short | PCI_COMMAND_MASTER | - PCI_COMMAND_MEMORY); - } + if (is_monarch()) + __pci_master_init(hose); } #endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) */ diff --git a/board/gdsys/gdppc440etx/gdppc440etx.c b/board/gdsys/gdppc440etx/gdppc440etx.c index 10e146b42..ecbc3c3d1 100644 --- a/board/gdsys/gdppc440etx/gdppc440etx.c +++ b/board/gdsys/gdppc440etx/gdppc440etx.c @@ -174,24 +174,3 @@ int pci_pre_init(struct pci_controller *hose) return 1; } #endif /* defined(CONFIG_PCI) */ - -/* - * pci_master_init - * - */ -#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) -void pci_master_init(struct pci_controller *hose) -{ - unsigned short temp_short; - - /* - * Write the PowerPC440 EP PCI Configuration regs. - * Enable PowerPC440 EP to be a master on the PCI bus (PMM). - * Enable PowerPC440 EP to act as a PCI memory target (PTM). - */ - pci_read_config_word(0, PCI_COMMAND, &temp_short); - pci_write_config_word(0, PCI_COMMAND, - temp_short | PCI_COMMAND_MASTER | - PCI_COMMAND_MEMORY); -} -#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) */ diff --git a/board/korat/korat.c b/board/korat/korat.c index 78ccb1122..f942052bd 100644 --- a/board/korat/korat.c +++ b/board/korat/korat.c @@ -622,23 +622,6 @@ void pci_target_init(struct pci_controller *hose) } #endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ -#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) -void pci_master_init(struct pci_controller *hose) -{ - unsigned short temp_short; - - /* - * Write the PowerPC440 EP PCI Configuration regs. - * Enable PowerPC440 EP to be a master on the PCI bus (PMM). - * Enable PowerPC440 EP to act as a PCI memory target (PTM). - */ - pci_read_config_word(0, PCI_COMMAND, &temp_short); - pci_write_config_word(0, PCI_COMMAND, - temp_short | PCI_COMMAND_MASTER | - PCI_COMMAND_MEMORY); -} -#endif - #if defined(CONFIG_POST) /* * Returns 1 if keys pressed to start the power-on long-running tests diff --git a/board/lwmon5/lwmon5.c b/board/lwmon5/lwmon5.c index bd29437a2..415e036c0 100644 --- a/board/lwmon5/lwmon5.c +++ b/board/lwmon5/lwmon5.c @@ -275,27 +275,6 @@ int checkboard(void) return (0); } -/************************************************************************* - * pci_master_init - * - ************************************************************************/ -#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) -void pci_master_init(struct pci_controller *hose) -{ - unsigned short temp_short; - - /*--------------------------------------------------------------------------+ - | Write the PowerPC440 EP PCI Configuration regs. - | Enable PowerPC440 EP to be a master on the PCI bus (PMM). - | Enable PowerPC440 EP to act as a PCI memory target (PTM). - +--------------------------------------------------------------------------*/ - pci_read_config_word(0, PCI_COMMAND, &temp_short); - pci_write_config_word(0, PCI_COMMAND, - temp_short | PCI_COMMAND_MASTER | - PCI_COMMAND_MEMORY); -} -#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) */ - void hw_watchdog_reset(void) { int val; diff --git a/board/netstal/hcu5/hcu5.c b/board/netstal/hcu5/hcu5.c index 144fdd970..861564564 100644 --- a/board/netstal/hcu5/hcu5.c +++ b/board/netstal/hcu5/hcu5.c @@ -22,6 +22,8 @@ #include #include #include +#include + #include "../common/nm.h" DECLARE_GLOBAL_DATA_PTR; @@ -377,23 +379,14 @@ int pci_pre_init(struct pci_controller *hose) } /* - * pci_master_init - * + * Override weak default pci_master_init() */ void pci_master_init(struct pci_controller *hose) { - unsigned short temp_short; - if (!board_with_pci()) { return; } - - /*--------------------------------------------------------------- - * Write the PowerPC440 EP PCI Configuration regs. - * Enable PowerPC440 EP to be a master on the PCI bus (PMM). - * Enable PowerPC440 EP to act as a PCI memory target (PTM). - *--------------------------------------------------------------*/ - pci_read_config_word(0, PCI_COMMAND, &temp_short); - pci_write_config_word(0, PCI_COMMAND, - temp_short | PCI_COMMAND_MASTER | - PCI_COMMAND_MEMORY); + if (!board_with_pci()) + return; + + __pci_master_init(hose); } #endif /* defined(CONFIG_PCI) */ diff --git a/board/pcs440ep/pcs440ep.c b/board/pcs440ep/pcs440ep.c index e7c575d8a..ce1e61667 100644 --- a/board/pcs440ep/pcs440ep.c +++ b/board/pcs440ep/pcs440ep.c @@ -550,27 +550,6 @@ phys_size_t initdram (int board_type) return dram_size; } -/************************************************************************* - * pci_master_init - * - ************************************************************************/ -#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) -void pci_master_init(struct pci_controller *hose) -{ - unsigned short temp_short; - - /*--------------------------------------------------------------------------+ - | Write the PowerPC440 EP PCI Configuration regs. - | Enable PowerPC440 EP to be a master on the PCI bus (PMM). - | Enable PowerPC440 EP to act as a PCI memory target (PTM). - +--------------------------------------------------------------------------*/ - pci_read_config_word(0, PCI_COMMAND, &temp_short); - pci_write_config_word(0, PCI_COMMAND, - temp_short | PCI_COMMAND_MASTER | - PCI_COMMAND_MEMORY); -} -#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) */ - /************************************************************************* * hw_watchdog_reset * diff --git a/cpu/ppc4xx/4xx_pci.c b/cpu/ppc4xx/4xx_pci.c index 01b9cf721..eed4534e5 100644 --- a/cpu/ppc4xx/4xx_pci.c +++ b/cpu/ppc4xx/4xx_pci.c @@ -686,6 +686,24 @@ void pci_target_init(struct pci_controller * hose) int pci_pre_init(struct pci_controller *hose) __attribute__((weak, alias("__pci_pre_init"))); +#if defined(CONFIG_SYS_PCI_MASTER_INIT) +void __pci_master_init(struct pci_controller *hose) +{ + u16 reg; + + /* + * Write the PowerPC440 EP PCI Configuration regs. + * Enable PowerPC440 EP to be a master on the PCI bus (PMM). + * Enable PowerPC440 EP to act as a PCI memory target (PTM). + */ + pci_read_config_word(0, PCI_COMMAND, ®); + pci_write_config_word(0, PCI_COMMAND, reg | + PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY); +} +void pci_master_init(struct pci_controller *hose) + __attribute__((weak, alias("__pci_master_init"))); +#endif /* CONFIG_SYS_PCI_MASTER_INIT */ + int pci_440_init (struct pci_controller *hose) { int reg_num = 0; diff --git a/include/asm-ppc/4xx_pci.h b/include/asm-ppc/4xx_pci.h index 31769901c..f686e7cb0 100644 --- a/include/asm-ppc/4xx_pci.h +++ b/include/asm-ppc/4xx_pci.h @@ -55,5 +55,6 @@ void board_pci_fixup_irq(struct pci_controller *hose, pci_dev_t dev); int pci_arbiter_enabled(void); int __pci_pre_init(struct pci_controller *hose); void __pci_target_init(struct pci_controller *hose); +void __pci_master_init(struct pci_controller *hose); #endif -- cgit v1.2.3 From 629ab99b3b19c1b7e06a7c4e5d666138bc924c7c Mon Sep 17 00:00:00 2001 From: Matthias Fuchs Date: Wed, 18 Nov 2009 16:28:42 +0100 Subject: ppc4xx: Remove confusing comment This is not the sequoia board. Signed-off-by: Matthias Fuchs Signed-off-by: Stefan Roese --- board/esd/pmc440/config.mk | 4 ---- 1 file changed, 4 deletions(-) (limited to 'board') diff --git a/board/esd/pmc440/config.mk b/board/esd/pmc440/config.mk index 0c4d58282..91e65ec8a 100644 --- a/board/esd/pmc440/config.mk +++ b/board/esd/pmc440/config.mk @@ -20,10 +20,6 @@ # Foundation, Inc., 59 Temple Place, Suite 330, Boston, # MA 02111-1307 USA # -# -# AMCC 440EPx Reference Platform (Sequoia) board -# - sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp ifndef TEXT_BASE -- cgit v1.2.3 From 34ddbd171ba154e9afd83f07a07ad8b57ac592e3 Mon Sep 17 00:00:00 2001 From: Matthias Fuchs Date: Thu, 22 Oct 2009 23:06:59 +0200 Subject: ppc4xx: Remove autoupdate feature from PLU405 board The autoupdate feature is not used on PLU405 boards. So remove it. Signed-off-by: Matthias Fuchs Signed-off-by: Stefan Roese --- board/esd/plu405/Makefile | 1 - board/esd/plu405/plu405.c | 16 ---------------- include/configs/PLU405.h | 2 -- 3 files changed, 19 deletions(-) (limited to 'board') diff --git a/board/esd/plu405/Makefile b/board/esd/plu405/Makefile index c57d90cf6..98acb4b77 100644 --- a/board/esd/plu405/Makefile +++ b/board/esd/plu405/Makefile @@ -31,7 +31,6 @@ LIB = $(obj)lib$(BOARD).a COBJS = $(BOARD).o flash.o \ ../common/misc.o \ ../common/esd405ep_nand.o \ - ../common/auto_update.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/esd/plu405/plu405.c b/board/esd/plu405/plu405.c index f14ef7a20..1841cda0b 100644 --- a/board/esd/plu405/plu405.c +++ b/board/esd/plu405/plu405.c @@ -45,22 +45,6 @@ const unsigned char fpgadata[] = */ #include "../common/fpga.c" -/* - * include common auto-update code (for esd boards) - */ -#include "../common/auto_update.h" - -au_image_t au_image[] = { - {"plu405/preinst.img", 0, -1, AU_SCRIPT}, - {"plu405/u-boot.img", 0xfffc0000, 0x00040000, AU_FIRMWARE}, - {"plu405/pImage_${bd_type}", 0x00000000, 0x00100000, AU_NAND}, - {"plu405/pImage.initrd", 0x00100000, 0x00200000, AU_NAND}, - {"plu405/yaffsmt2.img", 0x00300000, 0x01c00000, AU_NAND}, - {"plu405/postinst.img", 0, 0, AU_SCRIPT}, -}; - -int N_AU_IMAGES = (sizeof(au_image) / sizeof(au_image[0])); - /* Prototypes */ int gunzip(void *, int, unsigned char *, unsigned long *); diff --git a/include/configs/PLU405.h b/include/configs/PLU405.h index 955e0a8d8..85e4611aa 100644 --- a/include/configs/PLU405.h +++ b/include/configs/PLU405.h @@ -99,8 +99,6 @@ #define CONFIG_SUPPORT_VFAT -#define CONFIG_AUTO_UPDATE 1 /* autoupdate via compactflash */ - #undef CONFIG_WATCHDOG /* watchdog disabled */ #define CONFIG_RTC_MC146818 /* DS1685 is MC146818 compatible*/ -- cgit v1.2.3 From c88ed4cb2eed29a690ac6689ed1dc2f5e9547d15 Mon Sep 17 00:00:00 2001 From: Mark Asselstine <[mark.asselstine@windriver.com]> Date: Tue, 27 Oct 2009 19:40:40 +0530 Subject: sheevaplug: correct SDRAM address control register value The SheevaPlug DevKit is shipped with 4x8 by 1Gb DDR devices in two banks for a total of 512MB of RAM. Based on this configuration the existing values for SDRAM address control register are incorrect and result in random kernel oops as memory is incorrectly accessed (while for example extracting a large tarball such as a rootfs). Based on the hardware configuration along with the supporting documentation from Marvell these are the correct values, as well this change mimics values previously used in Marvell's own u-boot git tree for the SheevaPlug. Other variants of the hardware such as the PogoPlug and TonidoPlug may have different memory configurations but to properly support those additional board directories should be maintained or a better system to support other kwb*.cfg is needed. Tested on SheevaPlug DevKit. Signed-off-by: Mark Asselstine --- board/Marvell/sheevaplug/kwbimage.cfg | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'board') diff --git a/board/Marvell/sheevaplug/kwbimage.cfg b/board/Marvell/sheevaplug/kwbimage.cfg index 6c47d6267..3b9c53f57 100644 --- a/board/Marvell/sheevaplug/kwbimage.cfg +++ b/board/Marvell/sheevaplug/kwbimage.cfg @@ -74,11 +74,11 @@ DATA 0xFFD0140C 0x00000a33 # DDR Timing (High) # bit12-11: TW2W # bit31-13: zero required -DATA 0xFFD01410 0x00000099 # DDR Address Control -# bit1-0: 01, Cs0width=x16 -# bit3-2: 10, Cs0size=512Mb -# bit5-4: 01, Cs1width=x16 -# bit7-6: 10, Cs1size=512Mb +DATA 0xFFD01410 0x000000cc # DDR Address Control +# bit1-0: 00, Cs0width=x8 +# bit3-2: 11, Cs0size=1Gb +# bit5-4: 00, Cs1width=x8 +# bit7-6: 11, Cs1size=1Gb # bit9-8: 00, Cs2width=nonexistent # bit11-10: 00, Cs2size =nonexistent # bit13-12: 00, Cs3width=nonexistent -- cgit v1.2.3 From 492fb1fdbcdd5e21be0b6742c15f76c648f0653b Mon Sep 17 00:00:00 2001 From: "kevin.morfitt@fearnside-systems.co.uk" Date: Tue, 3 Nov 2009 18:08:41 +0900 Subject: Move s3c24x0 header files to asm-arm/arch-s3c24x0/ This patch moves the s3c24x0 header files from include/ to include/asm-arm/arch-s3c24x0/. checkpatch.pl showed 2 errors and 3 warnings. The 2 errors were both due to a non-UTF8 character in David M?ller's name: ERROR: Invalid UTF-8, patch and commit message should be encoded in UTF-8 #489: FILE: include/asm-arm/arch-s3c24x0/s3c2410.h:3: + * David M?ller ELSOFT AG Switzerland. d.mueller@elsoft.ch As David's name correctly contains a non-UTF8 character I haven't fixed these errors. The 3 warnings were all because of the use of 'volatile' in s3c24x0.h: WARNING: Use of volatile is usually wrong: see Documentation/volatile-considered-harmful.txt #673: FILE: include/asm-arm/arch-s3c24x0/s3c24x0.h:35: +typedef volatile u8 S3C24X0_REG8; +typedef volatile u16 S3C24X0_REG16; +typedef volatile u32 S3C24X0_REG32; I'll fix these errors in another patch. Tested by running MAKEALL for ARM8 targets and ensuring there were no new errors or warnings. Signed-off-by: Kevin Morfitt Signed-off-by: Minkyu Kang --- board/mpl/vcma9/vcma9.c | 2 +- board/mpl/vcma9/vcma9.h | 2 +- board/samsung/smdk2400/smdk2400.c | 2 +- board/samsung/smdk2410/smdk2410.c | 2 +- board/sbc2410x/sbc2410x.c | 2 +- board/trab/cmd_trab.c | 2 +- board/trab/rs485.c | 2 +- board/trab/rs485.h | 2 +- board/trab/trab.c | 2 +- board/trab/trab_fkt.c | 2 +- board/trab/tsc2000.c | 2 +- board/trab/vfd.c | 2 +- cpu/arm920t/s3c24x0/interrupts.c | 4 +- cpu/arm920t/s3c24x0/speed.c | 4 +- cpu/arm920t/s3c24x0/timer.c | 4 +- cpu/arm920t/s3c24x0/usb.c | 4 +- cpu/arm920t/s3c24x0/usb_ohci.c | 4 +- drivers/i2c/s3c24x0_i2c.c | 4 +- drivers/mtd/nand/s3c2410_nand.c | 2 +- drivers/rtc/s3c24x0_rtc.c | 4 +- drivers/serial/serial_s3c24x0.c | 4 +- include/asm-arm/arch-s3c24x0/s3c2400.h | 136 +++++++ include/asm-arm/arch-s3c24x0/s3c2410.h | 146 ++++++++ include/asm-arm/arch-s3c24x0/s3c24x0.h | 656 +++++++++++++++++++++++++++++++++ include/s3c2400.h | 136 ------- include/s3c2410.h | 146 -------- include/s3c24x0.h | 656 --------------------------------- 27 files changed, 967 insertions(+), 967 deletions(-) create mode 100644 include/asm-arm/arch-s3c24x0/s3c2400.h create mode 100644 include/asm-arm/arch-s3c24x0/s3c2410.h create mode 100644 include/asm-arm/arch-s3c24x0/s3c24x0.h delete mode 100644 include/s3c2400.h delete mode 100644 include/s3c2410.h delete mode 100644 include/s3c24x0.h (limited to 'board') diff --git a/board/mpl/vcma9/vcma9.c b/board/mpl/vcma9/vcma9.c index 4d8b579ca..f3bd28845 100644 --- a/board/mpl/vcma9/vcma9.c +++ b/board/mpl/vcma9/vcma9.c @@ -27,7 +27,7 @@ #include #include -#include +#include #include #include diff --git a/board/mpl/vcma9/vcma9.h b/board/mpl/vcma9/vcma9.h index f46e0e4c5..9f32808c6 100644 --- a/board/mpl/vcma9/vcma9.h +++ b/board/mpl/vcma9/vcma9.h @@ -25,7 +25,7 @@ * Global routines used for VCMA9 *****************************************************************************/ -#include +#include extern int mem_test(unsigned long start, unsigned long ramsize,int mode); diff --git a/board/samsung/smdk2400/smdk2400.c b/board/samsung/smdk2400/smdk2400.c index 42bf00868..be0c70ad0 100644 --- a/board/samsung/smdk2400/smdk2400.c +++ b/board/samsung/smdk2400/smdk2400.c @@ -27,7 +27,7 @@ #include #include -#include +#include DECLARE_GLOBAL_DATA_PTR; diff --git a/board/samsung/smdk2410/smdk2410.c b/board/samsung/smdk2410/smdk2410.c index fde773093..a8cf2874a 100644 --- a/board/samsung/smdk2410/smdk2410.c +++ b/board/samsung/smdk2410/smdk2410.c @@ -27,7 +27,7 @@ #include #include -#include +#include DECLARE_GLOBAL_DATA_PTR; diff --git a/board/sbc2410x/sbc2410x.c b/board/sbc2410x/sbc2410x.c index 7452c1f94..6768c028c 100644 --- a/board/sbc2410x/sbc2410x.c +++ b/board/sbc2410x/sbc2410x.c @@ -30,7 +30,7 @@ #include #include -#include +#include #if defined(CONFIG_CMD_NAND) #include diff --git a/board/trab/cmd_trab.c b/board/trab/cmd_trab.c index 04a36075b..a01ffcc02 100644 --- a/board/trab/cmd_trab.c +++ b/board/trab/cmd_trab.c @@ -25,7 +25,7 @@ #include #include -#include +#include #include /* diff --git a/board/trab/rs485.c b/board/trab/rs485.c index 7d5c0a2c9..f402c5990 100644 --- a/board/trab/rs485.c +++ b/board/trab/rs485.c @@ -22,7 +22,7 @@ */ #include -#include +#include #include "rs485.h" static void rs485_setbrg (void); diff --git a/board/trab/rs485.h b/board/trab/rs485.h index 9f0a5b9b4..4a2d83f0b 100644 --- a/board/trab/rs485.h +++ b/board/trab/rs485.h @@ -24,7 +24,7 @@ #ifndef _RS485_H_ #define _RS485_H_ -#include +#include int rs485_init (void); int rs485_getc (void); diff --git a/board/trab/trab.c b/board/trab/trab.c index ea782a913..f8836ff37 100644 --- a/board/trab/trab.c +++ b/board/trab/trab.c @@ -26,7 +26,7 @@ #include #include #include -#include +#include #include DECLARE_GLOBAL_DATA_PTR; diff --git a/board/trab/trab_fkt.c b/board/trab/trab_fkt.c index dc2a8d775..940e12f25 100644 --- a/board/trab/trab_fkt.c +++ b/board/trab/trab_fkt.c @@ -26,7 +26,7 @@ #include #include #include -#include +#include #include "tsc2000.h" #include "rs485.h" diff --git a/board/trab/tsc2000.c b/board/trab/tsc2000.c index fc501a8a4..f757202de 100644 --- a/board/trab/tsc2000.c +++ b/board/trab/tsc2000.c @@ -26,7 +26,7 @@ */ #include -#include +#include #include #include #include "tsc2000.h" diff --git a/board/trab/vfd.c b/board/trab/vfd.c index d5ad5bbdf..8d9a05716 100644 --- a/board/trab/vfd.c +++ b/board/trab/vfd.c @@ -37,7 +37,7 @@ #include #include #include -#include +#include DECLARE_GLOBAL_DATA_PTR; diff --git a/cpu/arm920t/s3c24x0/interrupts.c b/cpu/arm920t/s3c24x0/interrupts.c index 914894613..3e8422e14 100644 --- a/cpu/arm920t/s3c24x0/interrupts.c +++ b/cpu/arm920t/s3c24x0/interrupts.c @@ -32,9 +32,9 @@ #include #if defined(CONFIG_S3C2400) -#include +#include #elif defined(CONFIG_S3C2410) -#include +#include #endif #include diff --git a/cpu/arm920t/s3c24x0/speed.c b/cpu/arm920t/s3c24x0/speed.c index 136c7794a..85c73a3ee 100644 --- a/cpu/arm920t/s3c24x0/speed.c +++ b/cpu/arm920t/s3c24x0/speed.c @@ -35,9 +35,9 @@ #include #if defined(CONFIG_S3C2400) -#include +#include #elif defined(CONFIG_S3C2410) -#include +#include #endif #define MPLL 0 diff --git a/cpu/arm920t/s3c24x0/timer.c b/cpu/arm920t/s3c24x0/timer.c index 20cedd463..2667da6e8 100644 --- a/cpu/arm920t/s3c24x0/timer.c +++ b/cpu/arm920t/s3c24x0/timer.c @@ -37,9 +37,9 @@ #include #if defined(CONFIG_S3C2400) -#include +#include #elif defined(CONFIG_S3C2410) -#include +#include #endif int timer_load_val = 0; diff --git a/cpu/arm920t/s3c24x0/usb.c b/cpu/arm920t/s3c24x0/usb.c index b5ba8c4f3..5e19cda8f 100644 --- a/cpu/arm920t/s3c24x0/usb.c +++ b/cpu/arm920t/s3c24x0/usb.c @@ -27,9 +27,9 @@ # if defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410) #if defined(CONFIG_S3C2400) -# include +# include #elif defined(CONFIG_S3C2410) -# include +# include #endif #include diff --git a/cpu/arm920t/s3c24x0/usb_ohci.c b/cpu/arm920t/s3c24x0/usb_ohci.c index 7672e4ce1..41119922e 100644 --- a/cpu/arm920t/s3c24x0/usb_ohci.c +++ b/cpu/arm920t/s3c24x0/usb_ohci.c @@ -39,9 +39,9 @@ #ifdef CONFIG_USB_OHCI #if defined(CONFIG_S3C2400) -#include +#include #elif defined(CONFIG_S3C2410) -#include +#include #endif #include diff --git a/drivers/i2c/s3c24x0_i2c.c b/drivers/i2c/s3c24x0_i2c.c index 55c6a12aa..8fecc6e3f 100644 --- a/drivers/i2c/s3c24x0_i2c.c +++ b/drivers/i2c/s3c24x0_i2c.c @@ -28,9 +28,9 @@ #include #if defined(CONFIG_S3C2400) -#include +#include #elif defined(CONFIG_S3C2410) -#include +#include #endif #include diff --git a/drivers/mtd/nand/s3c2410_nand.c b/drivers/mtd/nand/s3c2410_nand.c index 815c78eb6..2f89b8c96 100644 --- a/drivers/mtd/nand/s3c2410_nand.c +++ b/drivers/mtd/nand/s3c2410_nand.c @@ -21,7 +21,7 @@ #include #include -#include +#include #include #define S3C2410_NFCONF_EN (1<<15) diff --git a/drivers/rtc/s3c24x0_rtc.c b/drivers/rtc/s3c24x0_rtc.c index 1ce34e38d..2d78f93ae 100644 --- a/drivers/rtc/s3c24x0_rtc.c +++ b/drivers/rtc/s3c24x0_rtc.c @@ -31,9 +31,9 @@ #if (defined(CONFIG_CMD_DATE)) #if defined(CONFIG_S3C2400) -#include +#include #elif defined(CONFIG_S3C2410) -#include +#include #endif #include diff --git a/drivers/serial/serial_s3c24x0.c b/drivers/serial/serial_s3c24x0.c index c2c72e456..914d07cda 100644 --- a/drivers/serial/serial_s3c24x0.c +++ b/drivers/serial/serial_s3c24x0.c @@ -20,9 +20,9 @@ #include #if defined(CONFIG_S3C2400) || defined(CONFIG_TRAB) -#include +#include #elif defined(CONFIG_S3C2410) -#include +#include #endif DECLARE_GLOBAL_DATA_PTR; diff --git a/include/asm-arm/arch-s3c24x0/s3c2400.h b/include/asm-arm/arch-s3c24x0/s3c2400.h new file mode 100644 index 000000000..26bd4e49a --- /dev/null +++ b/include/asm-arm/arch-s3c24x0/s3c2400.h @@ -0,0 +1,136 @@ +/* + * (C) Copyright 2003 + * David Müller ELSOFT AG Switzerland. d.mueller@elsoft.ch + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/************************************************ + * NAME : s3c2400.h + * Version : 31.3.2003 + * + * Based on S3C2400X User's manual Rev 1.1 + ************************************************/ + +#ifndef __S3C2400_H__ +#define __S3C2400_H__ + +#define S3C24X0_UART_CHANNELS 2 +#define S3C24X0_SPI_CHANNELS 1 +#define PALETTE (0x14A00400) /* SJS */ + +enum s3c24x0_uarts_nr { + S3C24X0_UART0, + S3C24X0_UART1, +}; + +/*S3C2400 device base addresses */ +#define S3C24X0_MEMCTL_BASE 0x14000000 +#define S3C24X0_USB_HOST_BASE 0x14200000 +#define S3C24X0_INTERRUPT_BASE 0x14400000 +#define S3C24X0_DMA_BASE 0x14600000 +#define S3C24X0_CLOCK_POWER_BASE 0x14800000 +#define S3C24X0_LCD_BASE 0x14A00000 +#define S3C24X0_UART_BASE 0x15000000 +#define S3C24X0_TIMER_BASE 0x15100000 +#define S3C24X0_USB_DEVICE_BASE 0x15200140 +#define S3C24X0_WATCHDOG_BASE 0x15300000 +#define S3C24X0_I2C_BASE 0x15400000 +#define S3C24X0_I2S_BASE 0x15508000 +#define S3C24X0_GPIO_BASE 0x15600000 +#define S3C24X0_RTC_BASE 0x15700000 +#define S3C24X0_ADC_BASE 0x15800000 +#define S3C24X0_SPI_BASE 0x15900000 +#define S3C2400_MMC_BASE 0x15A00000 + +/* include common stuff */ +#include + + +static inline struct s3c24x0_memctl *s3c24x0_get_base_memctl(void) +{ + return (struct s3c24x0_memctl *)S3C24X0_MEMCTL_BASE; +} +static inline struct s3c24x0_usb_host *s3c24x0_get_base_usb_host(void) +{ + return (struct s3c24x0_usb_host *)S3C24X0_USB_HOST_BASE; +} +static inline struct s3c24x0_interrupt *s3c24x0_get_base_interrupt(void) +{ + return (struct s3c24x0_interrupt *)S3C24X0_INTERRUPT_BASE; +} +static inline struct s3c24x0_dmas *s3c24x0_get_base_dmas(void) +{ + return (struct s3c24x0_dmas *)S3C24X0_DMA_BASE; +} +static inline struct s3c24x0_clock_power *s3c24x0_get_base_clock_power(void) +{ + return (struct s3c24x0_clock_power *)S3C24X0_CLOCK_POWER_BASE; +} +static inline struct s3c24x0_lcd *s3c24x0_get_base_lcd(void) +{ + return (struct s3c24x0_lcd *)S3C24X0_LCD_BASE; +} +static inline struct s3c24x0_uart + *s3c24x0_get_base_uart(enum s3c24x0_uarts_nr n) +{ + return (struct s3c24x0_uart *)(S3C24X0_UART_BASE + (n * 0x4000)); +} +static inline struct s3c24x0_timers *s3c24x0_get_base_timers(void) +{ + return (struct s3c24x0_timers *)S3C24X0_TIMER_BASE; +} +static inline struct s3c24x0_usb_device *s3c24x0_get_base_usb_device(void) +{ + return (struct s3c24x0_usb_device *)S3C24X0_USB_DEVICE_BASE; +} +static inline struct s3c24x0_watchdog *s3c24x0_get_base_watchdog(void) +{ + return (struct s3c24x0_watchdog *)S3C24X0_WATCHDOG_BASE; +} +static inline struct s3c24x0_i2c *s3c24x0_get_base_i2c(void) +{ + return (struct s3c24x0_i2c *)S3C24X0_I2C_BASE; +} +static inline struct s3c24x0_i2s *s3c24x0_get_base_i2s(void) +{ + return (struct s3c24x0_i2s *)S3C24X0_I2S_BASE; +} +static inline struct s3c24x0_gpio *s3c24x0_get_base_gpio(void) +{ + return (struct s3c24x0_gpio *)S3C24X0_GPIO_BASE; +} +static inline struct s3c24x0_rtc *s3c24x0_get_base_rtc(void) +{ + return (struct s3c24x0_rtc *)S3C24X0_RTC_BASE; +} +static inline struct s3c2400_adc *s3c2400_get_base_adc(void) +{ + return (struct s3c2400_adc *)S3C24X0_ADC_BASE; +} +static inline struct s3c24x0_spi *s3c24x0_get_base_spi(void) +{ + return (struct s3c24x0_spi *)S3C24X0_SPI_BASE; +} +static inline struct s3c2400_mmc *s3c2400_get_base_mmc(void) +{ + return (struct s3c2400_mmc *)S3C2400_MMC_BASE; +} + +#endif /*__S3C2400_H__*/ diff --git a/include/asm-arm/arch-s3c24x0/s3c2410.h b/include/asm-arm/arch-s3c24x0/s3c2410.h new file mode 100644 index 000000000..be2e76e5f --- /dev/null +++ b/include/asm-arm/arch-s3c24x0/s3c2410.h @@ -0,0 +1,146 @@ +/* + * (C) Copyright 2003 + * David Müller ELSOFT AG Switzerland. d.mueller@elsoft.ch + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/************************************************ + * NAME : s3c2410.h + * Version : 31.3.2003 + * + * Based on S3C2410X User's manual Rev 1.1 + ************************************************/ + +#ifndef __S3C2410_H__ +#define __S3C2410_H__ + +#define S3C24X0_UART_CHANNELS 3 +#define S3C24X0_SPI_CHANNELS 2 + +/* S3C2410 only supports 512 Byte HW ECC */ +#define S3C2410_ECCSIZE 512 +#define S3C2410_ECCBYTES 3 + +enum s3c24x0_uarts_nr { + S3C24X0_UART0, + S3C24X0_UART1, + S3C24X0_UART2 +}; + +/* S3C2410 device base addresses */ +#define S3C24X0_MEMCTL_BASE 0x48000000 +#define S3C24X0_USB_HOST_BASE 0x49000000 +#define S3C24X0_INTERRUPT_BASE 0x4A000000 +#define S3C24X0_DMA_BASE 0x4B000000 +#define S3C24X0_CLOCK_POWER_BASE 0x4C000000 +#define S3C24X0_LCD_BASE 0x4D000000 +#define S3C2410_NAND_BASE 0x4E000000 +#define S3C24X0_UART_BASE 0x50000000 +#define S3C24X0_TIMER_BASE 0x51000000 +#define S3C24X0_USB_DEVICE_BASE 0x52000140 +#define S3C24X0_WATCHDOG_BASE 0x53000000 +#define S3C24X0_I2C_BASE 0x54000000 +#define S3C24X0_I2S_BASE 0x55000000 +#define S3C24X0_GPIO_BASE 0x56000000 +#define S3C24X0_RTC_BASE 0x57000000 +#define S3C2410_ADC_BASE 0x58000000 +#define S3C24X0_SPI_BASE 0x59000000 +#define S3C2410_SDI_BASE 0x5A000000 + + +/* include common stuff */ +#include + + +static inline struct s3c24x0_memctl *s3c24x0_get_base_memctl(void) +{ + return (struct s3c24x0_memctl *)S3C24X0_MEMCTL_BASE; +} +static inline struct s3c24x0_usb_host *s3c24x0_get_base_usb_host(void) +{ + return (struct s3c24x0_usb_host *)S3C24X0_USB_HOST_BASE; +} +static inline struct s3c24x0_interrupt *s3c24x0_get_base_interrupt(void) +{ + return (struct s3c24x0_interrupt *)S3C24X0_INTERRUPT_BASE; +} +static inline struct s3c24x0_dmas *s3c24x0_get_base_dmas(void) +{ + return (struct s3c24x0_dmas *)S3C24X0_DMA_BASE; +} +static inline struct s3c24x0_clock_power *s3c24x0_get_base_clock_power(void) +{ + return (struct s3c24x0_clock_power *)S3C24X0_CLOCK_POWER_BASE; +} +static inline struct s3c24x0_lcd *s3c24x0_get_base_lcd(void) +{ + return (struct s3c24x0_lcd *)S3C24X0_LCD_BASE; +} +static inline struct s3c2410_nand *s3c2410_get_base_nand(void) +{ + return (struct s3c2410_nand *)S3C2410_NAND_BASE; +} +static inline struct s3c24x0_uart + *s3c24x0_get_base_uart(enum s3c24x0_uarts_nr n) +{ + return (struct s3c24x0_uart *)(S3C24X0_UART_BASE + (n * 0x4000)); +} +static inline struct s3c24x0_timers *s3c24x0_get_base_timers(void) +{ + return (struct s3c24x0_timers *)S3C24X0_TIMER_BASE; +} +static inline struct s3c24x0_usb_device *s3c24x0_get_base_usb_device(void) +{ + return (struct s3c24x0_usb_device *)S3C24X0_USB_DEVICE_BASE; +} +static inline struct s3c24x0_watchdog *s3c24x0_get_base_watchdog(void) +{ + return (struct s3c24x0_watchdog *)S3C24X0_WATCHDOG_BASE; +} +static inline struct s3c24x0_i2c *s3c24x0_get_base_i2c(void) +{ + return (struct s3c24x0_i2c *)S3C24X0_I2C_BASE; +} +static inline struct s3c24x0_i2s *s3c24x0_get_base_i2s(void) +{ + return (struct s3c24x0_i2s *)S3C24X0_I2S_BASE; +} +static inline struct s3c24x0_gpio *s3c24x0_get_base_gpio(void) +{ + return (struct s3c24x0_gpio *)S3C24X0_GPIO_BASE; +} +static inline struct s3c24x0_rtc *s3c24x0_get_base_rtc(void) +{ + return (struct s3c24x0_rtc *)S3C24X0_RTC_BASE; +} +static inline struct s3c2410_adc *s3c2410_get_base_adc(void) +{ + return (struct s3c2410_adc *)S3C2410_ADC_BASE; +} +static inline struct s3c24x0_spi *s3c24x0_get_base_spi(void) +{ + return (struct s3c24x0_spi *)S3C24X0_SPI_BASE; +} +static inline struct s3c2410_sdi *s3c2410_get_base_sdi(void) +{ + return (struct s3c2410_sdi *)S3C2410_SDI_BASE; +} + +#endif /*__S3C2410_H__*/ diff --git a/include/asm-arm/arch-s3c24x0/s3c24x0.h b/include/asm-arm/arch-s3c24x0/s3c24x0.h new file mode 100644 index 000000000..56a551aeb --- /dev/null +++ b/include/asm-arm/arch-s3c24x0/s3c24x0.h @@ -0,0 +1,656 @@ +/* + * (C) Copyright 2003 + * David Müller ELSOFT AG Switzerland. d.mueller@elsoft.ch + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/************************************************ + * NAME : s3c24x0.h + * Version : 31.3.2003 + * + * common stuff for SAMSUNG S3C24X0 SoC + ************************************************/ + +#ifndef __S3C24X0_H__ +#define __S3C24X0_H__ + +typedef volatile u8 S3C24X0_REG8; +typedef volatile u16 S3C24X0_REG16; +typedef volatile u32 S3C24X0_REG32; + +/* Memory controller (see manual chapter 5) */ +struct s3c24x0_memctl { + S3C24X0_REG32 BWSCON; + S3C24X0_REG32 BANKCON[8]; + S3C24X0_REG32 REFRESH; + S3C24X0_REG32 BANKSIZE; + S3C24X0_REG32 MRSRB6; + S3C24X0_REG32 MRSRB7; +}; + + +/* USB HOST (see manual chapter 12) */ +struct s3c24x0_usb_host { + S3C24X0_REG32 HcRevision; + S3C24X0_REG32 HcControl; + S3C24X0_REG32 HcCommonStatus; + S3C24X0_REG32 HcInterruptStatus; + S3C24X0_REG32 HcInterruptEnable; + S3C24X0_REG32 HcInterruptDisable; + S3C24X0_REG32 HcHCCA; + S3C24X0_REG32 HcPeriodCuttendED; + S3C24X0_REG32 HcControlHeadED; + S3C24X0_REG32 HcControlCurrentED; + S3C24X0_REG32 HcBulkHeadED; + S3C24X0_REG32 HcBuldCurrentED; + S3C24X0_REG32 HcDoneHead; + S3C24X0_REG32 HcRmInterval; + S3C24X0_REG32 HcFmRemaining; + S3C24X0_REG32 HcFmNumber; + S3C24X0_REG32 HcPeriodicStart; + S3C24X0_REG32 HcLSThreshold; + S3C24X0_REG32 HcRhDescriptorA; + S3C24X0_REG32 HcRhDescriptorB; + S3C24X0_REG32 HcRhStatus; + S3C24X0_REG32 HcRhPortStatus1; + S3C24X0_REG32 HcRhPortStatus2; +}; + + +/* INTERRUPT (see manual chapter 14) */ +struct s3c24x0_interrupt { + S3C24X0_REG32 SRCPND; + S3C24X0_REG32 INTMOD; + S3C24X0_REG32 INTMSK; + S3C24X0_REG32 PRIORITY; + S3C24X0_REG32 INTPND; + S3C24X0_REG32 INTOFFSET; +#ifdef CONFIG_S3C2410 + S3C24X0_REG32 SUBSRCPND; + S3C24X0_REG32 INTSUBMSK; +#endif +}; + + +/* DMAS (see manual chapter 8) */ +struct s3c24x0_dma { + S3C24X0_REG32 DISRC; +#ifdef CONFIG_S3C2410 + S3C24X0_REG32 DISRCC; +#endif + S3C24X0_REG32 DIDST; +#ifdef CONFIG_S3C2410 + S3C24X0_REG32 DIDSTC; +#endif + S3C24X0_REG32 DCON; + S3C24X0_REG32 DSTAT; + S3C24X0_REG32 DCSRC; + S3C24X0_REG32 DCDST; + S3C24X0_REG32 DMASKTRIG; +#ifdef CONFIG_S3C2400 + S3C24X0_REG32 res[1]; +#endif +#ifdef CONFIG_S3C2410 + S3C24X0_REG32 res[7]; +#endif +}; + +struct s3c24x0_dmas { + struct s3c24x0_dma dma[4]; +}; + + +/* CLOCK & POWER MANAGEMENT (see S3C2400 manual chapter 6) */ +/* (see S3C2410 manual chapter 7) */ +struct s3c24x0_clock_power { + S3C24X0_REG32 LOCKTIME; + S3C24X0_REG32 MPLLCON; + S3C24X0_REG32 UPLLCON; + S3C24X0_REG32 CLKCON; + S3C24X0_REG32 CLKSLOW; + S3C24X0_REG32 CLKDIVN; +}; + + +/* LCD CONTROLLER (see manual chapter 15) */ +struct s3c24x0_lcd { + S3C24X0_REG32 LCDCON1; + S3C24X0_REG32 LCDCON2; + S3C24X0_REG32 LCDCON3; + S3C24X0_REG32 LCDCON4; + S3C24X0_REG32 LCDCON5; + S3C24X0_REG32 LCDSADDR1; + S3C24X0_REG32 LCDSADDR2; + S3C24X0_REG32 LCDSADDR3; + S3C24X0_REG32 REDLUT; + S3C24X0_REG32 GREENLUT; + S3C24X0_REG32 BLUELUT; + S3C24X0_REG32 res[8]; + S3C24X0_REG32 DITHMODE; + S3C24X0_REG32 TPAL; +#ifdef CONFIG_S3C2410 + S3C24X0_REG32 LCDINTPND; + S3C24X0_REG32 LCDSRCPND; + S3C24X0_REG32 LCDINTMSK; + S3C24X0_REG32 LPCSEL; +#endif +}; + + +/* NAND FLASH (see S3C2410 manual chapter 6) */ +struct s3c2410_nand { + S3C24X0_REG32 NFCONF; + S3C24X0_REG32 NFCMD; + S3C24X0_REG32 NFADDR; + S3C24X0_REG32 NFDATA; + S3C24X0_REG32 NFSTAT; + S3C24X0_REG32 NFECC; +}; + + +/* UART (see manual chapter 11) */ +struct s3c24x0_uart { + S3C24X0_REG32 ULCON; + S3C24X0_REG32 UCON; + S3C24X0_REG32 UFCON; + S3C24X0_REG32 UMCON; + S3C24X0_REG32 UTRSTAT; + S3C24X0_REG32 UERSTAT; + S3C24X0_REG32 UFSTAT; + S3C24X0_REG32 UMSTAT; +#ifdef __BIG_ENDIAN + S3C24X0_REG8 res1[3]; + S3C24X0_REG8 UTXH; + S3C24X0_REG8 res2[3]; + S3C24X0_REG8 URXH; +#else /* Little Endian */ + S3C24X0_REG8 UTXH; + S3C24X0_REG8 res1[3]; + S3C24X0_REG8 URXH; + S3C24X0_REG8 res2[3]; +#endif + S3C24X0_REG32 UBRDIV; +}; + + +/* PWM TIMER (see manual chapter 10) */ +struct s3c24x0_timer { + S3C24X0_REG32 TCNTB; + S3C24X0_REG32 TCMPB; + S3C24X0_REG32 TCNTO; +}; + +struct s3c24x0_timers { + S3C24X0_REG32 TCFG0; + S3C24X0_REG32 TCFG1; + S3C24X0_REG32 TCON; + struct s3c24x0_timer ch[4]; + S3C24X0_REG32 TCNTB4; + S3C24X0_REG32 TCNTO4; +}; + + +/* USB DEVICE (see manual chapter 13) */ +struct s3c24x0_usb_dev_fifos { +#ifdef __BIG_ENDIAN + S3C24X0_REG8 res[3]; + S3C24X0_REG8 EP_FIFO_REG; +#else /* little endian */ + S3C24X0_REG8 EP_FIFO_REG; + S3C24X0_REG8 res[3]; +#endif +}; + +struct s3c24x0_usb_dev_dmas { +#ifdef __BIG_ENDIAN + S3C24X0_REG8 res1[3]; + S3C24X0_REG8 EP_DMA_CON; + S3C24X0_REG8 res2[3]; + S3C24X0_REG8 EP_DMA_UNIT; + S3C24X0_REG8 res3[3]; + S3C24X0_REG8 EP_DMA_FIFO; + S3C24X0_REG8 res4[3]; + S3C24X0_REG8 EP_DMA_TTC_L; + S3C24X0_REG8 res5[3]; + S3C24X0_REG8 EP_DMA_TTC_M; + S3C24X0_REG8 res6[3]; + S3C24X0_REG8 EP_DMA_TTC_H; +#else /* little endian */ + S3C24X0_REG8 EP_DMA_CON; + S3C24X0_REG8 res1[3]; + S3C24X0_REG8 EP_DMA_UNIT; + S3C24X0_REG8 res2[3]; + S3C24X0_REG8 EP_DMA_FIFO; + S3C24X0_REG8 res3[3]; + S3C24X0_REG8 EP_DMA_TTC_L; + S3C24X0_REG8 res4[3]; + S3C24X0_REG8 EP_DMA_TTC_M; + S3C24X0_REG8 res5[3]; + S3C24X0_REG8 EP_DMA_TTC_H; + S3C24X0_REG8 res6[3]; +#endif +}; + +struct s3c24x0_usb_device { +#ifdef __BIG_ENDIAN + S3C24X0_REG8 res1[3]; + S3C24X0_REG8 FUNC_ADDR_REG; + S3C24X0_REG8 res2[3]; + S3C24X0_REG8 PWR_REG; + S3C24X0_REG8 res3[3]; + S3C24X0_REG8 EP_INT_REG; + S3C24X0_REG8 res4[15]; + S3C24X0_REG8 USB_INT_REG; + S3C24X0_REG8 res5[3]; + S3C24X0_REG8 EP_INT_EN_REG; + S3C24X0_REG8 res6[15]; + S3C24X0_REG8 USB_INT_EN_REG; + S3C24X0_REG8 res7[3]; + S3C24X0_REG8 FRAME_NUM1_REG; + S3C24X0_REG8 res8[3]; + S3C24X0_REG8 FRAME_NUM2_REG; + S3C24X0_REG8 res9[3]; + S3C24X0_REG8 INDEX_REG; + S3C24X0_REG8 res10[7]; + S3C24X0_REG8 MAXP_REG; + S3C24X0_REG8 res11[3]; + S3C24X0_REG8 EP0_CSR_IN_CSR1_REG; + S3C24X0_REG8 res12[3]; + S3C24X0_REG8 IN_CSR2_REG; + S3C24X0_REG8 res13[7]; + S3C24X0_REG8 OUT_CSR1_REG; + S3C24X0_REG8 res14[3]; + S3C24X0_REG8 OUT_CSR2_REG; + S3C24X0_REG8 res15[3]; + S3C24X0_REG8 OUT_FIFO_CNT1_REG; + S3C24X0_REG8 res16[3]; + S3C24X0_REG8 OUT_FIFO_CNT2_REG; +#else /* little endian */ + S3C24X0_REG8 FUNC_ADDR_REG; + S3C24X0_REG8 res1[3]; + S3C24X0_REG8 PWR_REG; + S3C24X0_REG8 res2[3]; + S3C24X0_REG8 EP_INT_REG; + S3C24X0_REG8 res3[15]; + S3C24X0_REG8 USB_INT_REG; + S3C24X0_REG8 res4[3]; + S3C24X0_REG8 EP_INT_EN_REG; + S3C24X0_REG8 res5[15]; + S3C24X0_REG8 USB_INT_EN_REG; + S3C24X0_REG8 res6[3]; + S3C24X0_REG8 FRAME_NUM1_REG; + S3C24X0_REG8 res7[3]; + S3C24X0_REG8 FRAME_NUM2_REG; + S3C24X0_REG8 res8[3]; + S3C24X0_REG8 INDEX_REG; + S3C24X0_REG8 res9[7]; + S3C24X0_REG8 MAXP_REG; + S3C24X0_REG8 res10[7]; + S3C24X0_REG8 EP0_CSR_IN_CSR1_REG; + S3C24X0_REG8 res11[3]; + S3C24X0_REG8 IN_CSR2_REG; + S3C24X0_REG8 res12[3]; + S3C24X0_REG8 OUT_CSR1_REG; + S3C24X0_REG8 res13[7]; + S3C24X0_REG8 OUT_CSR2_REG; + S3C24X0_REG8 res14[3]; + S3C24X0_REG8 OUT_FIFO_CNT1_REG; + S3C24X0_REG8 res15[3]; + S3C24X0_REG8 OUT_FIFO_CNT2_REG; + S3C24X0_REG8 res16[3]; +#endif /* __BIG_ENDIAN */ + struct s3c24x0_usb_dev_fifos fifo[5]; + struct s3c24x0_usb_dev_dmas dma[5]; +}; + + +/* WATCH DOG TIMER (see manual chapter 18) */ +struct s3c24x0_watchdog { + S3C24X0_REG32 WTCON; + S3C24X0_REG32 WTDAT; + S3C24X0_REG32 WTCNT; +}; + + +/* IIC (see manual chapter 20) */ +struct s3c24x0_i2c { + S3C24X0_REG32 IICCON; + S3C24X0_REG32 IICSTAT; + S3C24X0_REG32 IICADD; + S3C24X0_REG32 IICDS; +}; + + +/* IIS (see manual chapter 21) */ +struct s3c24x0_i2s { +#ifdef __BIG_ENDIAN + S3C24X0_REG16 res1; + S3C24X0_REG16 IISCON; + S3C24X0_REG16 res2; + S3C24X0_REG16 IISMOD; + S3C24X0_REG16 res3; + S3C24X0_REG16 IISPSR; + S3C24X0_REG16 res4; + S3C24X0_REG16 IISFCON; + S3C24X0_REG16 res5; + S3C24X0_REG16 IISFIFO; +#else /* little endian */ + S3C24X0_REG16 IISCON; + S3C24X0_REG16 res1; + S3C24X0_REG16 IISMOD; + S3C24X0_REG16 res2; + S3C24X0_REG16 IISPSR; + S3C24X0_REG16 res3; + S3C24X0_REG16 IISFCON; + S3C24X0_REG16 res4; + S3C24X0_REG16 IISFIFO; + S3C24X0_REG16 res5; +#endif +}; + + +/* I/O PORT (see manual chapter 9) */ +struct s3c24x0_gpio { +#ifdef CONFIG_S3C2400 + S3C24X0_REG32 PACON; + S3C24X0_REG32 PADAT; + + S3C24X0_REG32 PBCON; + S3C24X0_REG32 PBDAT; + S3C24X0_REG32 PBUP; + + S3C24X0_REG32 PCCON; + S3C24X0_REG32 PCDAT; + S3C24X0_REG32 PCUP; + + S3C24X0_REG32 PDCON; + S3C24X0_REG32 PDDAT; + S3C24X0_REG32 PDUP; + + S3C24X0_REG32 PECON; + S3C24X0_REG32 PEDAT; + S3C24X0_REG32 PEUP; + + S3C24X0_REG32 PFCON; + S3C24X0_REG32 PFDAT; + S3C24X0_REG32 PFUP; + + S3C24X0_REG32 PGCON; + S3C24X0_REG32 PGDAT; + S3C24X0_REG32 PGUP; + + S3C24X0_REG32 OPENCR; + + S3C24X0_REG32 MISCCR; + S3C24X0_REG32 EXTINT; +#endif +#ifdef CONFIG_S3C2410 + S3C24X0_REG32 GPACON; + S3C24X0_REG32 GPADAT; + S3C24X0_REG32 res1[2]; + S3C24X0_REG32 GPBCON; + S3C24X0_REG32 GPBDAT; + S3C24X0_REG32 GPBUP; + S3C24X0_REG32 res2; + S3C24X0_REG32 GPCCON; + S3C24X0_REG32 GPCDAT; + S3C24X0_REG32 GPCUP; + S3C24X0_REG32 res3; + S3C24X0_REG32 GPDCON; + S3C24X0_REG32 GPDDAT; + S3C24X0_REG32 GPDUP; + S3C24X0_REG32 res4; + S3C24X0_REG32 GPECON; + S3C24X0_REG32 GPEDAT; + S3C24X0_REG32 GPEUP; + S3C24X0_REG32 res5; + S3C24X0_REG32 GPFCON; + S3C24X0_REG32 GPFDAT; + S3C24X0_REG32 GPFUP; + S3C24X0_REG32 res6; + S3C24X0_REG32 GPGCON; + S3C24X0_REG32 GPGDAT; + S3C24X0_REG32 GPGUP; + S3C24X0_REG32 res7; + S3C24X0_REG32 GPHCON; + S3C24X0_REG32 GPHDAT; + S3C24X0_REG32 GPHUP; + S3C24X0_REG32 res8; + + S3C24X0_REG32 MISCCR; + S3C24X0_REG32 DCLKCON; + S3C24X0_REG32 EXTINT0; + S3C24X0_REG32 EXTINT1; + S3C24X0_REG32 EXTINT2; + S3C24X0_REG32 EINTFLT0; + S3C24X0_REG32 EINTFLT1; + S3C24X0_REG32 EINTFLT2; + S3C24X0_REG32 EINTFLT3; + S3C24X0_REG32 EINTMASK; + S3C24X0_REG32 EINTPEND; + S3C24X0_REG32 GSTATUS0; + S3C24X0_REG32 GSTATUS1; + S3C24X0_REG32 GSTATUS2; + S3C24X0_REG32 GSTATUS3; + S3C24X0_REG32 GSTATUS4; +#endif +}; + + +/* RTC (see manual chapter 17) */ +struct s3c24x0_rtc { +#ifdef __BIG_ENDIAN + S3C24X0_REG8 res1[67]; + S3C24X0_REG8 RTCCON; + S3C24X0_REG8 res2[3]; + S3C24X0_REG8 TICNT; + S3C24X0_REG8 res3[11]; + S3C24X0_REG8 RTCALM; + S3C24X0_REG8 res4[3]; + S3C24X0_REG8 ALMSEC; + S3C24X0_REG8 res5[3]; + S3C24X0_REG8 ALMMIN; + S3C24X0_REG8 res6[3]; + S3C24X0_REG8 ALMHOUR; + S3C24X0_REG8 res7[3]; + S3C24X0_REG8 ALMDATE; + S3C24X0_REG8 res8[3]; + S3C24X0_REG8 ALMMON; + S3C24X0_REG8 res9[3]; + S3C24X0_REG8 ALMYEAR; + S3C24X0_REG8 res10[3]; + S3C24X0_REG8 RTCRST; + S3C24X0_REG8 res11[3]; + S3C24X0_REG8 BCDSEC; + S3C24X0_REG8 res12[3]; + S3C24X0_REG8 BCDMIN; + S3C24X0_REG8 res13[3]; + S3C24X0_REG8 BCDHOUR; + S3C24X0_REG8 res14[3]; + S3C24X0_REG8 BCDDATE; + S3C24X0_REG8 res15[3]; + S3C24X0_REG8 BCDDAY; + S3C24X0_REG8 res16[3]; + S3C24X0_REG8 BCDMON; + S3C24X0_REG8 res17[3]; + S3C24X0_REG8 BCDYEAR; +#else /* little endian */ + S3C24X0_REG8 res0[64]; + S3C24X0_REG8 RTCCON; + S3C24X0_REG8 res1[3]; + S3C24X0_REG8 TICNT; + S3C24X0_REG8 res2[11]; + S3C24X0_REG8 RTCALM; + S3C24X0_REG8 res3[3]; + S3C24X0_REG8 ALMSEC; + S3C24X0_REG8 res4[3]; + S3C24X0_REG8 ALMMIN; + S3C24X0_REG8 res5[3]; + S3C24X0_REG8 ALMHOUR; + S3C24X0_REG8 res6[3]; + S3C24X0_REG8 ALMDATE; + S3C24X0_REG8 res7[3]; + S3C24X0_REG8 ALMMON; + S3C24X0_REG8 res8[3]; + S3C24X0_REG8 ALMYEAR; + S3C24X0_REG8 res9[3]; + S3C24X0_REG8 RTCRST; + S3C24X0_REG8 res10[3]; + S3C24X0_REG8 BCDSEC; + S3C24X0_REG8 res11[3]; + S3C24X0_REG8 BCDMIN; + S3C24X0_REG8 res12[3]; + S3C24X0_REG8 BCDHOUR; + S3C24X0_REG8 res13[3]; + S3C24X0_REG8 BCDDATE; + S3C24X0_REG8 res14[3]; + S3C24X0_REG8 BCDDAY; + S3C24X0_REG8 res15[3]; + S3C24X0_REG8 BCDMON; + S3C24X0_REG8 res16[3]; + S3C24X0_REG8 BCDYEAR; + S3C24X0_REG8 res17[3]; +#endif +}; + + +/* ADC (see manual chapter 16) */ +struct s3c2400_adc { + S3C24X0_REG32 ADCCON; + S3C24X0_REG32 ADCDAT; +}; + + +/* ADC (see manual chapter 16) */ +struct s3c2410_adc { + S3C24X0_REG32 ADCCON; + S3C24X0_REG32 ADCTSC; + S3C24X0_REG32 ADCDLY; + S3C24X0_REG32 ADCDAT0; + S3C24X0_REG32 ADCDAT1; +}; + + +/* SPI (see manual chapter 22) */ +struct s3c24x0_spi_channel { + S3C24X0_REG8 SPCON; + S3C24X0_REG8 res1[3]; + S3C24X0_REG8 SPSTA; + S3C24X0_REG8 res2[3]; + S3C24X0_REG8 SPPIN; + S3C24X0_REG8 res3[3]; + S3C24X0_REG8 SPPRE; + S3C24X0_REG8 res4[3]; + S3C24X0_REG8 SPTDAT; + S3C24X0_REG8 res5[3]; + S3C24X0_REG8 SPRDAT; + S3C24X0_REG8 res6[3]; + S3C24X0_REG8 res7[16]; +}; + +struct s3c24x0_spi { + struct s3c24x0_spi_channel ch[S3C24X0_SPI_CHANNELS]; +}; + + +/* MMC INTERFACE (see S3C2400 manual chapter 19) */ +struct s3c2400_mmc { +#ifdef __BIG_ENDIAN + S3C24X0_REG8 res1[3]; + S3C24X0_REG8 MMCON; + S3C24X0_REG8 res2[3]; + S3C24X0_REG8 MMCRR; + S3C24X0_REG8 res3[3]; + S3C24X0_REG8 MMFCON; + S3C24X0_REG8 res4[3]; + S3C24X0_REG8 MMSTA; + S3C24X0_REG16 res5; + S3C24X0_REG16 MMFSTA; + S3C24X0_REG8 res6[3]; + S3C24X0_REG8 MMPRE; + S3C24X0_REG16 res7; + S3C24X0_REG16 MMLEN; + S3C24X0_REG8 res8[3]; + S3C24X0_REG8 MMCR7; + S3C24X0_REG32 MMRSP[4]; + S3C24X0_REG8 res9[3]; + S3C24X0_REG8 MMCMD0; + S3C24X0_REG32 MMCMD1; + S3C24X0_REG16 res10; + S3C24X0_REG16 MMCR16; + S3C24X0_REG8 res11[3]; + S3C24X0_REG8 MMDAT; +#else + S3C24X0_REG8 MMCON; + S3C24X0_REG8 res1[3]; + S3C24X0_REG8 MMCRR; + S3C24X0_REG8 res2[3]; + S3C24X0_REG8 MMFCON; + S3C24X0_REG8 res3[3]; + S3C24X0_REG8 MMSTA; + S3C24X0_REG8 res4[3]; + S3C24X0_REG16 MMFSTA; + S3C24X0_REG16 res5; + S3C24X0_REG8 MMPRE; + S3C24X0_REG8 res6[3]; + S3C24X0_REG16 MMLEN; + S3C24X0_REG16 res7; + S3C24X0_REG8 MMCR7; + S3C24X0_REG8 res8[3]; + S3C24X0_REG32 MMRSP[4]; + S3C24X0_REG8 MMCMD0; + S3C24X0_REG8 res9[3]; + S3C24X0_REG32 MMCMD1; + S3C24X0_REG16 MMCR16; + S3C24X0_REG16 res10; + S3C24X0_REG8 MMDAT; + S3C24X0_REG8 res11[3]; +#endif +}; + + +/* SD INTERFACE (see S3C2410 manual chapter 19) */ +struct s3c2410_sdi { + S3C24X0_REG32 SDICON; + S3C24X0_REG32 SDIPRE; + S3C24X0_REG32 SDICARG; + S3C24X0_REG32 SDICCON; + S3C24X0_REG32 SDICSTA; + S3C24X0_REG32 SDIRSP0; + S3C24X0_REG32 SDIRSP1; + S3C24X0_REG32 SDIRSP2; + S3C24X0_REG32 SDIRSP3; + S3C24X0_REG32 SDIDTIMER; + S3C24X0_REG32 SDIBSIZE; + S3C24X0_REG32 SDIDCON; + S3C24X0_REG32 SDIDCNT; + S3C24X0_REG32 SDIDSTA; + S3C24X0_REG32 SDIFSTA; +#ifdef __BIG_ENDIAN + S3C24X0_REG8 res[3]; + S3C24X0_REG8 SDIDAT; +#else + S3C24X0_REG8 SDIDAT; + S3C24X0_REG8 res[3]; +#endif + S3C24X0_REG32 SDIIMSK; +}; + +#endif /*__S3C24X0_H__*/ diff --git a/include/s3c2400.h b/include/s3c2400.h deleted file mode 100644 index 062259d10..000000000 --- a/include/s3c2400.h +++ /dev/null @@ -1,136 +0,0 @@ -/* - * (C) Copyright 2003 - * David Müller ELSOFT AG Switzerland. d.mueller@elsoft.ch - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/************************************************ - * NAME : s3c2400.h - * Version : 31.3.2003 - * - * Based on S3C2400X User's manual Rev 1.1 - ************************************************/ - -#ifndef __S3C2400_H__ -#define __S3C2400_H__ - -#define S3C24X0_UART_CHANNELS 2 -#define S3C24X0_SPI_CHANNELS 1 -#define PALETTE (0x14A00400) /* SJS */ - -enum s3c24x0_uarts_nr { - S3C24X0_UART0, - S3C24X0_UART1, -}; - -/*S3C2400 device base addresses */ -#define S3C24X0_MEMCTL_BASE 0x14000000 -#define S3C24X0_USB_HOST_BASE 0x14200000 -#define S3C24X0_INTERRUPT_BASE 0x14400000 -#define S3C24X0_DMA_BASE 0x14600000 -#define S3C24X0_CLOCK_POWER_BASE 0x14800000 -#define S3C24X0_LCD_BASE 0x14A00000 -#define S3C24X0_UART_BASE 0x15000000 -#define S3C24X0_TIMER_BASE 0x15100000 -#define S3C24X0_USB_DEVICE_BASE 0x15200140 -#define S3C24X0_WATCHDOG_BASE 0x15300000 -#define S3C24X0_I2C_BASE 0x15400000 -#define S3C24X0_I2S_BASE 0x15508000 -#define S3C24X0_GPIO_BASE 0x15600000 -#define S3C24X0_RTC_BASE 0x15700000 -#define S3C24X0_ADC_BASE 0x15800000 -#define S3C24X0_SPI_BASE 0x15900000 -#define S3C2400_MMC_BASE 0x15A00000 - -/* include common stuff */ -#include - - -static inline struct s3c24x0_memctl *s3c24x0_get_base_memctl(void) -{ - return (struct s3c24x0_memctl *)S3C24X0_MEMCTL_BASE; -} -static inline struct s3c24x0_usb_host *s3c24x0_get_base_usb_host(void) -{ - return (struct s3c24x0_usb_host *)S3C24X0_USB_HOST_BASE; -} -static inline struct s3c24x0_interrupt *s3c24x0_get_base_interrupt(void) -{ - return (struct s3c24x0_interrupt *)S3C24X0_INTERRUPT_BASE; -} -static inline struct s3c24x0_dmas *s3c24x0_get_base_dmas(void) -{ - return (struct s3c24x0_dmas *)S3C24X0_DMA_BASE; -} -static inline struct s3c24x0_clock_power *s3c24x0_get_base_clock_power(void) -{ - return (struct s3c24x0_clock_power *)S3C24X0_CLOCK_POWER_BASE; -} -static inline struct s3c24x0_lcd *s3c24x0_get_base_lcd(void) -{ - return (struct s3c24x0_lcd *)S3C24X0_LCD_BASE; -} -static inline struct s3c24x0_uart - *s3c24x0_get_base_uart(enum s3c24x0_uarts_nr n) -{ - return (struct s3c24x0_uart *)(S3C24X0_UART_BASE + (n * 0x4000)); -} -static inline struct s3c24x0_timers *s3c24x0_get_base_timers(void) -{ - return (struct s3c24x0_timers *)S3C24X0_TIMER_BASE; -} -static inline struct s3c24x0_usb_device *s3c24x0_get_base_usb_device(void) -{ - return (struct s3c24x0_usb_device *)S3C24X0_USB_DEVICE_BASE; -} -static inline struct s3c24x0_watchdog *s3c24x0_get_base_watchdog(void) -{ - return (struct s3c24x0_watchdog *)S3C24X0_WATCHDOG_BASE; -} -static inline struct s3c24x0_i2c *s3c24x0_get_base_i2c(void) -{ - return (struct s3c24x0_i2c *)S3C24X0_I2C_BASE; -} -static inline struct s3c24x0_i2s *s3c24x0_get_base_i2s(void) -{ - return (struct s3c24x0_i2s *)S3C24X0_I2S_BASE; -} -static inline struct s3c24x0_gpio *s3c24x0_get_base_gpio(void) -{ - return (struct s3c24x0_gpio *)S3C24X0_GPIO_BASE; -} -static inline struct s3c24x0_rtc *s3c24x0_get_base_rtc(void) -{ - return (struct s3c24x0_rtc *)S3C24X0_RTC_BASE; -} -static inline struct s3c2400_adc *s3c2400_get_base_adc(void) -{ - return (struct s3c2400_adc *)S3C24X0_ADC_BASE; -} -static inline struct s3c24x0_spi *s3c24x0_get_base_spi(void) -{ - return (struct s3c24x0_spi *)S3C24X0_SPI_BASE; -} -static inline struct s3c2400_mmc *s3c2400_get_base_mmc(void) -{ - return (struct s3c2400_mmc *)S3C2400_MMC_BASE; -} - -#endif /*__S3C2400_H__*/ diff --git a/include/s3c2410.h b/include/s3c2410.h deleted file mode 100644 index 03b33b492..000000000 --- a/include/s3c2410.h +++ /dev/null @@ -1,146 +0,0 @@ -/* - * (C) Copyright 2003 - * David Müller ELSOFT AG Switzerland. d.mueller@elsoft.ch - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/************************************************ - * NAME : s3c2410.h - * Version : 31.3.2003 - * - * Based on S3C2410X User's manual Rev 1.1 - ************************************************/ - -#ifndef __S3C2410_H__ -#define __S3C2410_H__ - -#define S3C24X0_UART_CHANNELS 3 -#define S3C24X0_SPI_CHANNELS 2 - -/* S3C2410 only supports 512 Byte HW ECC */ -#define S3C2410_ECCSIZE 512 -#define S3C2410_ECCBYTES 3 - -enum s3c24x0_uarts_nr { - S3C24X0_UART0, - S3C24X0_UART1, - S3C24X0_UART2 -}; - -/* S3C2410 device base addresses */ -#define S3C24X0_MEMCTL_BASE 0x48000000 -#define S3C24X0_USB_HOST_BASE 0x49000000 -#define S3C24X0_INTERRUPT_BASE 0x4A000000 -#define S3C24X0_DMA_BASE 0x4B000000 -#define S3C24X0_CLOCK_POWER_BASE 0x4C000000 -#define S3C24X0_LCD_BASE 0x4D000000 -#define S3C2410_NAND_BASE 0x4E000000 -#define S3C24X0_UART_BASE 0x50000000 -#define S3C24X0_TIMER_BASE 0x51000000 -#define S3C24X0_USB_DEVICE_BASE 0x52000140 -#define S3C24X0_WATCHDOG_BASE 0x53000000 -#define S3C24X0_I2C_BASE 0x54000000 -#define S3C24X0_I2S_BASE 0x55000000 -#define S3C24X0_GPIO_BASE 0x56000000 -#define S3C24X0_RTC_BASE 0x57000000 -#define S3C2410_ADC_BASE 0x58000000 -#define S3C24X0_SPI_BASE 0x59000000 -#define S3C2410_SDI_BASE 0x5A000000 - - -/* include common stuff */ -#include - - -static inline struct s3c24x0_memctl *s3c24x0_get_base_memctl(void) -{ - return (struct s3c24x0_memctl *)S3C24X0_MEMCTL_BASE; -} -static inline struct s3c24x0_usb_host *s3c24x0_get_base_usb_host(void) -{ - return (struct s3c24x0_usb_host *)S3C24X0_USB_HOST_BASE; -} -static inline struct s3c24x0_interrupt *s3c24x0_get_base_interrupt(void) -{ - return (struct s3c24x0_interrupt *)S3C24X0_INTERRUPT_BASE; -} -static inline struct s3c24x0_dmas *s3c24x0_get_base_dmas(void) -{ - return (struct s3c24x0_dmas *)S3C24X0_DMA_BASE; -} -static inline struct s3c24x0_clock_power *s3c24x0_get_base_clock_power(void) -{ - return (struct s3c24x0_clock_power *)S3C24X0_CLOCK_POWER_BASE; -} -static inline struct s3c24x0_lcd *s3c24x0_get_base_lcd(void) -{ - return (struct s3c24x0_lcd *)S3C24X0_LCD_BASE; -} -static inline struct s3c2410_nand *s3c2410_get_base_nand(void) -{ - return (struct s3c2410_nand *)S3C2410_NAND_BASE; -} -static inline struct s3c24x0_uart - *s3c24x0_get_base_uart(enum s3c24x0_uarts_nr n) -{ - return (struct s3c24x0_uart *)(S3C24X0_UART_BASE + (n * 0x4000)); -} -static inline struct s3c24x0_timers *s3c24x0_get_base_timers(void) -{ - return (struct s3c24x0_timers *)S3C24X0_TIMER_BASE; -} -static inline struct s3c24x0_usb_device *s3c24x0_get_base_usb_device(void) -{ - return (struct s3c24x0_usb_device *)S3C24X0_USB_DEVICE_BASE; -} -static inline struct s3c24x0_watchdog *s3c24x0_get_base_watchdog(void) -{ - return (struct s3c24x0_watchdog *)S3C24X0_WATCHDOG_BASE; -} -static inline struct s3c24x0_i2c *s3c24x0_get_base_i2c(void) -{ - return (struct s3c24x0_i2c *)S3C24X0_I2C_BASE; -} -static inline struct s3c24x0_i2s *s3c24x0_get_base_i2s(void) -{ - return (struct s3c24x0_i2s *)S3C24X0_I2S_BASE; -} -static inline struct s3c24x0_gpio *s3c24x0_get_base_gpio(void) -{ - return (struct s3c24x0_gpio *)S3C24X0_GPIO_BASE; -} -static inline struct s3c24x0_rtc *s3c24x0_get_base_rtc(void) -{ - return (struct s3c24x0_rtc *)S3C24X0_RTC_BASE; -} -static inline struct s3c2410_adc *s3c2410_get_base_adc(void) -{ - return (struct s3c2410_adc *)S3C2410_ADC_BASE; -} -static inline struct s3c24x0_spi *s3c24x0_get_base_spi(void) -{ - return (struct s3c24x0_spi *)S3C24X0_SPI_BASE; -} -static inline struct s3c2410_sdi *s3c2410_get_base_sdi(void) -{ - return (struct s3c2410_sdi *)S3C2410_SDI_BASE; -} - -#endif /*__S3C2410_H__*/ diff --git a/include/s3c24x0.h b/include/s3c24x0.h deleted file mode 100644 index 56a551aeb..000000000 --- a/include/s3c24x0.h +++ /dev/null @@ -1,656 +0,0 @@ -/* - * (C) Copyright 2003 - * David Müller ELSOFT AG Switzerland. d.mueller@elsoft.ch - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/************************************************ - * NAME : s3c24x0.h - * Version : 31.3.2003 - * - * common stuff for SAMSUNG S3C24X0 SoC - ************************************************/ - -#ifndef __S3C24X0_H__ -#define __S3C24X0_H__ - -typedef volatile u8 S3C24X0_REG8; -typedef volatile u16 S3C24X0_REG16; -typedef volatile u32 S3C24X0_REG32; - -/* Memory controller (see manual chapter 5) */ -struct s3c24x0_memctl { - S3C24X0_REG32 BWSCON; - S3C24X0_REG32 BANKCON[8]; - S3C24X0_REG32 REFRESH; - S3C24X0_REG32 BANKSIZE; - S3C24X0_REG32 MRSRB6; - S3C24X0_REG32 MRSRB7; -}; - - -/* USB HOST (see manual chapter 12) */ -struct s3c24x0_usb_host { - S3C24X0_REG32 HcRevision; - S3C24X0_REG32 HcControl; - S3C24X0_REG32 HcCommonStatus; - S3C24X0_REG32 HcInterruptStatus; - S3C24X0_REG32 HcInterruptEnable; - S3C24X0_REG32 HcInterruptDisable; - S3C24X0_REG32 HcHCCA; - S3C24X0_REG32 HcPeriodCuttendED; - S3C24X0_REG32 HcControlHeadED; - S3C24X0_REG32 HcControlCurrentED; - S3C24X0_REG32 HcBulkHeadED; - S3C24X0_REG32 HcBuldCurrentED; - S3C24X0_REG32 HcDoneHead; - S3C24X0_REG32 HcRmInterval; - S3C24X0_REG32 HcFmRemaining; - S3C24X0_REG32 HcFmNumber; - S3C24X0_REG32 HcPeriodicStart; - S3C24X0_REG32 HcLSThreshold; - S3C24X0_REG32 HcRhDescriptorA; - S3C24X0_REG32 HcRhDescriptorB; - S3C24X0_REG32 HcRhStatus; - S3C24X0_REG32 HcRhPortStatus1; - S3C24X0_REG32 HcRhPortStatus2; -}; - - -/* INTERRUPT (see manual chapter 14) */ -struct s3c24x0_interrupt { - S3C24X0_REG32 SRCPND; - S3C24X0_REG32 INTMOD; - S3C24X0_REG32 INTMSK; - S3C24X0_REG32 PRIORITY; - S3C24X0_REG32 INTPND; - S3C24X0_REG32 INTOFFSET; -#ifdef CONFIG_S3C2410 - S3C24X0_REG32 SUBSRCPND; - S3C24X0_REG32 INTSUBMSK; -#endif -}; - - -/* DMAS (see manual chapter 8) */ -struct s3c24x0_dma { - S3C24X0_REG32 DISRC; -#ifdef CONFIG_S3C2410 - S3C24X0_REG32 DISRCC; -#endif - S3C24X0_REG32 DIDST; -#ifdef CONFIG_S3C2410 - S3C24X0_REG32 DIDSTC; -#endif - S3C24X0_REG32 DCON; - S3C24X0_REG32 DSTAT; - S3C24X0_REG32 DCSRC; - S3C24X0_REG32 DCDST; - S3C24X0_REG32 DMASKTRIG; -#ifdef CONFIG_S3C2400 - S3C24X0_REG32 res[1]; -#endif -#ifdef CONFIG_S3C2410 - S3C24X0_REG32 res[7]; -#endif -}; - -struct s3c24x0_dmas { - struct s3c24x0_dma dma[4]; -}; - - -/* CLOCK & POWER MANAGEMENT (see S3C2400 manual chapter 6) */ -/* (see S3C2410 manual chapter 7) */ -struct s3c24x0_clock_power { - S3C24X0_REG32 LOCKTIME; - S3C24X0_REG32 MPLLCON; - S3C24X0_REG32 UPLLCON; - S3C24X0_REG32 CLKCON; - S3C24X0_REG32 CLKSLOW; - S3C24X0_REG32 CLKDIVN; -}; - - -/* LCD CONTROLLER (see manual chapter 15) */ -struct s3c24x0_lcd { - S3C24X0_REG32 LCDCON1; - S3C24X0_REG32 LCDCON2; - S3C24X0_REG32 LCDCON3; - S3C24X0_REG32 LCDCON4; - S3C24X0_REG32 LCDCON5; - S3C24X0_REG32 LCDSADDR1; - S3C24X0_REG32 LCDSADDR2; - S3C24X0_REG32 LCDSADDR3; - S3C24X0_REG32 REDLUT; - S3C24X0_REG32 GREENLUT; - S3C24X0_REG32 BLUELUT; - S3C24X0_REG32 res[8]; - S3C24X0_REG32 DITHMODE; - S3C24X0_REG32 TPAL; -#ifdef CONFIG_S3C2410 - S3C24X0_REG32 LCDINTPND; - S3C24X0_REG32 LCDSRCPND; - S3C24X0_REG32 LCDINTMSK; - S3C24X0_REG32 LPCSEL; -#endif -}; - - -/* NAND FLASH (see S3C2410 manual chapter 6) */ -struct s3c2410_nand { - S3C24X0_REG32 NFCONF; - S3C24X0_REG32 NFCMD; - S3C24X0_REG32 NFADDR; - S3C24X0_REG32 NFDATA; - S3C24X0_REG32 NFSTAT; - S3C24X0_REG32 NFECC; -}; - - -/* UART (see manual chapter 11) */ -struct s3c24x0_uart { - S3C24X0_REG32 ULCON; - S3C24X0_REG32 UCON; - S3C24X0_REG32 UFCON; - S3C24X0_REG32 UMCON; - S3C24X0_REG32 UTRSTAT; - S3C24X0_REG32 UERSTAT; - S3C24X0_REG32 UFSTAT; - S3C24X0_REG32 UMSTAT; -#ifdef __BIG_ENDIAN - S3C24X0_REG8 res1[3]; - S3C24X0_REG8 UTXH; - S3C24X0_REG8 res2[3]; - S3C24X0_REG8 URXH; -#else /* Little Endian */ - S3C24X0_REG8 UTXH; - S3C24X0_REG8 res1[3]; - S3C24X0_REG8 URXH; - S3C24X0_REG8 res2[3]; -#endif - S3C24X0_REG32 UBRDIV; -}; - - -/* PWM TIMER (see manual chapter 10) */ -struct s3c24x0_timer { - S3C24X0_REG32 TCNTB; - S3C24X0_REG32 TCMPB; - S3C24X0_REG32 TCNTO; -}; - -struct s3c24x0_timers { - S3C24X0_REG32 TCFG0; - S3C24X0_REG32 TCFG1; - S3C24X0_REG32 TCON; - struct s3c24x0_timer ch[4]; - S3C24X0_REG32 TCNTB4; - S3C24X0_REG32 TCNTO4; -}; - - -/* USB DEVICE (see manual chapter 13) */ -struct s3c24x0_usb_dev_fifos { -#ifdef __BIG_ENDIAN - S3C24X0_REG8 res[3]; - S3C24X0_REG8 EP_FIFO_REG; -#else /* little endian */ - S3C24X0_REG8 EP_FIFO_REG; - S3C24X0_REG8 res[3]; -#endif -}; - -struct s3c24x0_usb_dev_dmas { -#ifdef __BIG_ENDIAN - S3C24X0_REG8 res1[3]; - S3C24X0_REG8 EP_DMA_CON; - S3C24X0_REG8 res2[3]; - S3C24X0_REG8 EP_DMA_UNIT; - S3C24X0_REG8 res3[3]; - S3C24X0_REG8 EP_DMA_FIFO; - S3C24X0_REG8 res4[3]; - S3C24X0_REG8 EP_DMA_TTC_L; - S3C24X0_REG8 res5[3]; - S3C24X0_REG8 EP_DMA_TTC_M; - S3C24X0_REG8 res6[3]; - S3C24X0_REG8 EP_DMA_TTC_H; -#else /* little endian */ - S3C24X0_REG8 EP_DMA_CON; - S3C24X0_REG8 res1[3]; - S3C24X0_REG8 EP_DMA_UNIT; - S3C24X0_REG8 res2[3]; - S3C24X0_REG8 EP_DMA_FIFO; - S3C24X0_REG8 res3[3]; - S3C24X0_REG8 EP_DMA_TTC_L; - S3C24X0_REG8 res4[3]; - S3C24X0_REG8 EP_DMA_TTC_M; - S3C24X0_REG8 res5[3]; - S3C24X0_REG8 EP_DMA_TTC_H; - S3C24X0_REG8 res6[3]; -#endif -}; - -struct s3c24x0_usb_device { -#ifdef __BIG_ENDIAN - S3C24X0_REG8 res1[3]; - S3C24X0_REG8 FUNC_ADDR_REG; - S3C24X0_REG8 res2[3]; - S3C24X0_REG8 PWR_REG; - S3C24X0_REG8 res3[3]; - S3C24X0_REG8 EP_INT_REG; - S3C24X0_REG8 res4[15]; - S3C24X0_REG8 USB_INT_REG; - S3C24X0_REG8 res5[3]; - S3C24X0_REG8 EP_INT_EN_REG; - S3C24X0_REG8 res6[15]; - S3C24X0_REG8 USB_INT_EN_REG; - S3C24X0_REG8 res7[3]; - S3C24X0_REG8 FRAME_NUM1_REG; - S3C24X0_REG8 res8[3]; - S3C24X0_REG8 FRAME_NUM2_REG; - S3C24X0_REG8 res9[3]; - S3C24X0_REG8 INDEX_REG; - S3C24X0_REG8 res10[7]; - S3C24X0_REG8 MAXP_REG; - S3C24X0_REG8 res11[3]; - S3C24X0_REG8 EP0_CSR_IN_CSR1_REG; - S3C24X0_REG8 res12[3]; - S3C24X0_REG8 IN_CSR2_REG; - S3C24X0_REG8 res13[7]; - S3C24X0_REG8 OUT_CSR1_REG; - S3C24X0_REG8 res14[3]; - S3C24X0_REG8 OUT_CSR2_REG; - S3C24X0_REG8 res15[3]; - S3C24X0_REG8 OUT_FIFO_CNT1_REG; - S3C24X0_REG8 res16[3]; - S3C24X0_REG8 OUT_FIFO_CNT2_REG; -#else /* little endian */ - S3C24X0_REG8 FUNC_ADDR_REG; - S3C24X0_REG8 res1[3]; - S3C24X0_REG8 PWR_REG; - S3C24X0_REG8 res2[3]; - S3C24X0_REG8 EP_INT_REG; - S3C24X0_REG8 res3[15]; - S3C24X0_REG8 USB_INT_REG; - S3C24X0_REG8 res4[3]; - S3C24X0_REG8 EP_INT_EN_REG; - S3C24X0_REG8 res5[15]; - S3C24X0_REG8 USB_INT_EN_REG; - S3C24X0_REG8 res6[3]; - S3C24X0_REG8 FRAME_NUM1_REG; - S3C24X0_REG8 res7[3]; - S3C24X0_REG8 FRAME_NUM2_REG; - S3C24X0_REG8 res8[3]; - S3C24X0_REG8 INDEX_REG; - S3C24X0_REG8 res9[7]; - S3C24X0_REG8 MAXP_REG; - S3C24X0_REG8 res10[7]; - S3C24X0_REG8 EP0_CSR_IN_CSR1_REG; - S3C24X0_REG8 res11[3]; - S3C24X0_REG8 IN_CSR2_REG; - S3C24X0_REG8 res12[3]; - S3C24X0_REG8 OUT_CSR1_REG; - S3C24X0_REG8 res13[7]; - S3C24X0_REG8 OUT_CSR2_REG; - S3C24X0_REG8 res14[3]; - S3C24X0_REG8 OUT_FIFO_CNT1_REG; - S3C24X0_REG8 res15[3]; - S3C24X0_REG8 OUT_FIFO_CNT2_REG; - S3C24X0_REG8 res16[3]; -#endif /* __BIG_ENDIAN */ - struct s3c24x0_usb_dev_fifos fifo[5]; - struct s3c24x0_usb_dev_dmas dma[5]; -}; - - -/* WATCH DOG TIMER (see manual chapter 18) */ -struct s3c24x0_watchdog { - S3C24X0_REG32 WTCON; - S3C24X0_REG32 WTDAT; - S3C24X0_REG32 WTCNT; -}; - - -/* IIC (see manual chapter 20) */ -struct s3c24x0_i2c { - S3C24X0_REG32 IICCON; - S3C24X0_REG32 IICSTAT; - S3C24X0_REG32 IICADD; - S3C24X0_REG32 IICDS; -}; - - -/* IIS (see manual chapter 21) */ -struct s3c24x0_i2s { -#ifdef __BIG_ENDIAN - S3C24X0_REG16 res1; - S3C24X0_REG16 IISCON; - S3C24X0_REG16 res2; - S3C24X0_REG16 IISMOD; - S3C24X0_REG16 res3; - S3C24X0_REG16 IISPSR; - S3C24X0_REG16 res4; - S3C24X0_REG16 IISFCON; - S3C24X0_REG16 res5; - S3C24X0_REG16 IISFIFO; -#else /* little endian */ - S3C24X0_REG16 IISCON; - S3C24X0_REG16 res1; - S3C24X0_REG16 IISMOD; - S3C24X0_REG16 res2; - S3C24X0_REG16 IISPSR; - S3C24X0_REG16 res3; - S3C24X0_REG16 IISFCON; - S3C24X0_REG16 res4; - S3C24X0_REG16 IISFIFO; - S3C24X0_REG16 res5; -#endif -}; - - -/* I/O PORT (see manual chapter 9) */ -struct s3c24x0_gpio { -#ifdef CONFIG_S3C2400 - S3C24X0_REG32 PACON; - S3C24X0_REG32 PADAT; - - S3C24X0_REG32 PBCON; - S3C24X0_REG32 PBDAT; - S3C24X0_REG32 PBUP; - - S3C24X0_REG32 PCCON; - S3C24X0_REG32 PCDAT; - S3C24X0_REG32 PCUP; - - S3C24X0_REG32 PDCON; - S3C24X0_REG32 PDDAT; - S3C24X0_REG32 PDUP; - - S3C24X0_REG32 PECON; - S3C24X0_REG32 PEDAT; - S3C24X0_REG32 PEUP; - - S3C24X0_REG32 PFCON; - S3C24X0_REG32 PFDAT; - S3C24X0_REG32 PFUP; - - S3C24X0_REG32 PGCON; - S3C24X0_REG32 PGDAT; - S3C24X0_REG32 PGUP; - - S3C24X0_REG32 OPENCR; - - S3C24X0_REG32 MISCCR; - S3C24X0_REG32 EXTINT; -#endif -#ifdef CONFIG_S3C2410 - S3C24X0_REG32 GPACON; - S3C24X0_REG32 GPADAT; - S3C24X0_REG32 res1[2]; - S3C24X0_REG32 GPBCON; - S3C24X0_REG32 GPBDAT; - S3C24X0_REG32 GPBUP; - S3C24X0_REG32 res2; - S3C24X0_REG32 GPCCON; - S3C24X0_REG32 GPCDAT; - S3C24X0_REG32 GPCUP; - S3C24X0_REG32 res3; - S3C24X0_REG32 GPDCON; - S3C24X0_REG32 GPDDAT; - S3C24X0_REG32 GPDUP; - S3C24X0_REG32 res4; - S3C24X0_REG32 GPECON; - S3C24X0_REG32 GPEDAT; - S3C24X0_REG32 GPEUP; - S3C24X0_REG32 res5; - S3C24X0_REG32 GPFCON; - S3C24X0_REG32 GPFDAT; - S3C24X0_REG32 GPFUP; - S3C24X0_REG32 res6; - S3C24X0_REG32 GPGCON; - S3C24X0_REG32 GPGDAT; - S3C24X0_REG32 GPGUP; - S3C24X0_REG32 res7; - S3C24X0_REG32 GPHCON; - S3C24X0_REG32 GPHDAT; - S3C24X0_REG32 GPHUP; - S3C24X0_REG32 res8; - - S3C24X0_REG32 MISCCR; - S3C24X0_REG32 DCLKCON; - S3C24X0_REG32 EXTINT0; - S3C24X0_REG32 EXTINT1; - S3C24X0_REG32 EXTINT2; - S3C24X0_REG32 EINTFLT0; - S3C24X0_REG32 EINTFLT1; - S3C24X0_REG32 EINTFLT2; - S3C24X0_REG32 EINTFLT3; - S3C24X0_REG32 EINTMASK; - S3C24X0_REG32 EINTPEND; - S3C24X0_REG32 GSTATUS0; - S3C24X0_REG32 GSTATUS1; - S3C24X0_REG32 GSTATUS2; - S3C24X0_REG32 GSTATUS3; - S3C24X0_REG32 GSTATUS4; -#endif -}; - - -/* RTC (see manual chapter 17) */ -struct s3c24x0_rtc { -#ifdef __BIG_ENDIAN - S3C24X0_REG8 res1[67]; - S3C24X0_REG8 RTCCON; - S3C24X0_REG8 res2[3]; - S3C24X0_REG8 TICNT; - S3C24X0_REG8 res3[11]; - S3C24X0_REG8 RTCALM; - S3C24X0_REG8 res4[3]; - S3C24X0_REG8 ALMSEC; - S3C24X0_REG8 res5[3]; - S3C24X0_REG8 ALMMIN; - S3C24X0_REG8 res6[3]; - S3C24X0_REG8 ALMHOUR; - S3C24X0_REG8 res7[3]; - S3C24X0_REG8 ALMDATE; - S3C24X0_REG8 res8[3]; - S3C24X0_REG8 ALMMON; - S3C24X0_REG8 res9[3]; - S3C24X0_REG8 ALMYEAR; - S3C24X0_REG8 res10[3]; - S3C24X0_REG8 RTCRST; - S3C24X0_REG8 res11[3]; - S3C24X0_REG8 BCDSEC; - S3C24X0_REG8 res12[3]; - S3C24X0_REG8 BCDMIN; - S3C24X0_REG8 res13[3]; - S3C24X0_REG8 BCDHOUR; - S3C24X0_REG8 res14[3]; - S3C24X0_REG8 BCDDATE; - S3C24X0_REG8 res15[3]; - S3C24X0_REG8 BCDDAY; - S3C24X0_REG8 res16[3]; - S3C24X0_REG8 BCDMON; - S3C24X0_REG8 res17[3]; - S3C24X0_REG8 BCDYEAR; -#else /* little endian */ - S3C24X0_REG8 res0[64]; - S3C24X0_REG8 RTCCON; - S3C24X0_REG8 res1[3]; - S3C24X0_REG8 TICNT; - S3C24X0_REG8 res2[11]; - S3C24X0_REG8 RTCALM; - S3C24X0_REG8 res3[3]; - S3C24X0_REG8 ALMSEC; - S3C24X0_REG8 res4[3]; - S3C24X0_REG8 ALMMIN; - S3C24X0_REG8 res5[3]; - S3C24X0_REG8 ALMHOUR; - S3C24X0_REG8 res6[3]; - S3C24X0_REG8 ALMDATE; - S3C24X0_REG8 res7[3]; - S3C24X0_REG8 ALMMON; - S3C24X0_REG8 res8[3]; - S3C24X0_REG8 ALMYEAR; - S3C24X0_REG8 res9[3]; - S3C24X0_REG8 RTCRST; - S3C24X0_REG8 res10[3]; - S3C24X0_REG8 BCDSEC; - S3C24X0_REG8 res11[3]; - S3C24X0_REG8 BCDMIN; - S3C24X0_REG8 res12[3]; - S3C24X0_REG8 BCDHOUR; - S3C24X0_REG8 res13[3]; - S3C24X0_REG8 BCDDATE; - S3C24X0_REG8 res14[3]; - S3C24X0_REG8 BCDDAY; - S3C24X0_REG8 res15[3]; - S3C24X0_REG8 BCDMON; - S3C24X0_REG8 res16[3]; - S3C24X0_REG8 BCDYEAR; - S3C24X0_REG8 res17[3]; -#endif -}; - - -/* ADC (see manual chapter 16) */ -struct s3c2400_adc { - S3C24X0_REG32 ADCCON; - S3C24X0_REG32 ADCDAT; -}; - - -/* ADC (see manual chapter 16) */ -struct s3c2410_adc { - S3C24X0_REG32 ADCCON; - S3C24X0_REG32 ADCTSC; - S3C24X0_REG32 ADCDLY; - S3C24X0_REG32 ADCDAT0; - S3C24X0_REG32 ADCDAT1; -}; - - -/* SPI (see manual chapter 22) */ -struct s3c24x0_spi_channel { - S3C24X0_REG8 SPCON; - S3C24X0_REG8 res1[3]; - S3C24X0_REG8 SPSTA; - S3C24X0_REG8 res2[3]; - S3C24X0_REG8 SPPIN; - S3C24X0_REG8 res3[3]; - S3C24X0_REG8 SPPRE; - S3C24X0_REG8 res4[3]; - S3C24X0_REG8 SPTDAT; - S3C24X0_REG8 res5[3]; - S3C24X0_REG8 SPRDAT; - S3C24X0_REG8 res6[3]; - S3C24X0_REG8 res7[16]; -}; - -struct s3c24x0_spi { - struct s3c24x0_spi_channel ch[S3C24X0_SPI_CHANNELS]; -}; - - -/* MMC INTERFACE (see S3C2400 manual chapter 19) */ -struct s3c2400_mmc { -#ifdef __BIG_ENDIAN - S3C24X0_REG8 res1[3]; - S3C24X0_REG8 MMCON; - S3C24X0_REG8 res2[3]; - S3C24X0_REG8 MMCRR; - S3C24X0_REG8 res3[3]; - S3C24X0_REG8 MMFCON; - S3C24X0_REG8 res4[3]; - S3C24X0_REG8 MMSTA; - S3C24X0_REG16 res5; - S3C24X0_REG16 MMFSTA; - S3C24X0_REG8 res6[3]; - S3C24X0_REG8 MMPRE; - S3C24X0_REG16 res7; - S3C24X0_REG16 MMLEN; - S3C24X0_REG8 res8[3]; - S3C24X0_REG8 MMCR7; - S3C24X0_REG32 MMRSP[4]; - S3C24X0_REG8 res9[3]; - S3C24X0_REG8 MMCMD0; - S3C24X0_REG32 MMCMD1; - S3C24X0_REG16 res10; - S3C24X0_REG16 MMCR16; - S3C24X0_REG8 res11[3]; - S3C24X0_REG8 MMDAT; -#else - S3C24X0_REG8 MMCON; - S3C24X0_REG8 res1[3]; - S3C24X0_REG8 MMCRR; - S3C24X0_REG8 res2[3]; - S3C24X0_REG8 MMFCON; - S3C24X0_REG8 res3[3]; - S3C24X0_REG8 MMSTA; - S3C24X0_REG8 res4[3]; - S3C24X0_REG16 MMFSTA; - S3C24X0_REG16 res5; - S3C24X0_REG8 MMPRE; - S3C24X0_REG8 res6[3]; - S3C24X0_REG16 MMLEN; - S3C24X0_REG16 res7; - S3C24X0_REG8 MMCR7; - S3C24X0_REG8 res8[3]; - S3C24X0_REG32 MMRSP[4]; - S3C24X0_REG8 MMCMD0; - S3C24X0_REG8 res9[3]; - S3C24X0_REG32 MMCMD1; - S3C24X0_REG16 MMCR16; - S3C24X0_REG16 res10; - S3C24X0_REG8 MMDAT; - S3C24X0_REG8 res11[3]; -#endif -}; - - -/* SD INTERFACE (see S3C2410 manual chapter 19) */ -struct s3c2410_sdi { - S3C24X0_REG32 SDICON; - S3C24X0_REG32 SDIPRE; - S3C24X0_REG32 SDICARG; - S3C24X0_REG32 SDICCON; - S3C24X0_REG32 SDICSTA; - S3C24X0_REG32 SDIRSP0; - S3C24X0_REG32 SDIRSP1; - S3C24X0_REG32 SDIRSP2; - S3C24X0_REG32 SDIRSP3; - S3C24X0_REG32 SDIDTIMER; - S3C24X0_REG32 SDIBSIZE; - S3C24X0_REG32 SDIDCON; - S3C24X0_REG32 SDIDCNT; - S3C24X0_REG32 SDIDSTA; - S3C24X0_REG32 SDIFSTA; -#ifdef __BIG_ENDIAN - S3C24X0_REG8 res[3]; - S3C24X0_REG8 SDIDAT; -#else - S3C24X0_REG8 SDIDAT; - S3C24X0_REG8 res[3]; -#endif - S3C24X0_REG32 SDIIMSK; -}; - -#endif /*__S3C24X0_H__*/ -- cgit v1.2.3 From 47e801bec360e69e4b087a141d015b318e1b0212 Mon Sep 17 00:00:00 2001 From: Minkyu Kang Date: Wed, 4 Nov 2009 16:07:59 +0900 Subject: s3c64xx: move s3c64xx header files to asm-arm/arch-s3c64xx This patch moves the s3c64xx header files from include/ to include/asm-arm/arch-s3c64xx Signed-off-by: Minkyu Kang --- board/samsung/smdk6400/lowlevel_init.S | 2 +- board/samsung/smdk6400/smdk6400.c | 2 +- cpu/arm1176/cpu.c | 2 +- cpu/arm1176/s3c64xx/cpu_init.S | 2 +- cpu/arm1176/s3c64xx/reset.S | 2 +- cpu/arm1176/s3c64xx/speed.c | 2 +- cpu/arm1176/s3c64xx/timer.c | 2 +- cpu/arm1176/start.S | 2 +- drivers/mtd/nand/s3c64xx.c | 2 +- drivers/serial/s3c64xx.c | 2 +- drivers/usb/host/s3c64xx-hcd.c | 2 +- include/asm-arm/arch-s3c64xx/s3c6400.h | 895 +++++++++++++++++++++++++++++++++ include/asm-arm/arch-s3c64xx/s3c64x0.h | 90 ++++ include/s3c6400.h | 895 --------------------------------- include/s3c64x0.h | 90 ---- 15 files changed, 996 insertions(+), 996 deletions(-) create mode 100644 include/asm-arm/arch-s3c64xx/s3c6400.h create mode 100644 include/asm-arm/arch-s3c64xx/s3c64x0.h delete mode 100644 include/s3c6400.h delete mode 100644 include/s3c64x0.h (limited to 'board') diff --git a/board/samsung/smdk6400/lowlevel_init.S b/board/samsung/smdk6400/lowlevel_init.S index 47f72f613..30d88780d 100644 --- a/board/samsung/smdk6400/lowlevel_init.S +++ b/board/samsung/smdk6400/lowlevel_init.S @@ -34,7 +34,7 @@ #include #include -#include +#include #ifdef CONFIG_SERIAL1 #define ELFIN_UART_CONSOLE_BASE (ELFIN_UART_BASE + ELFIN_UART0_OFFSET) diff --git a/board/samsung/smdk6400/smdk6400.c b/board/samsung/smdk6400/smdk6400.c index 561c0c831..78aaa9e13 100644 --- a/board/samsung/smdk6400/smdk6400.c +++ b/board/samsung/smdk6400/smdk6400.c @@ -30,7 +30,7 @@ #include #include -#include +#include /* ------------------------------------------------------------------------- */ #define CS8900_Tacs 0x0 /* 0clk address set-up */ diff --git a/cpu/arm1176/cpu.c b/cpu/arm1176/cpu.c index d1a332748..2c0014f2b 100644 --- a/cpu/arm1176/cpu.c +++ b/cpu/arm1176/cpu.c @@ -33,7 +33,7 @@ #include #include -#include +#include #include static void cache_flush (void); diff --git a/cpu/arm1176/s3c64xx/cpu_init.S b/cpu/arm1176/s3c64xx/cpu_init.S index 32bb467f2..df88cba34 100644 --- a/cpu/arm1176/s3c64xx/cpu_init.S +++ b/cpu/arm1176/s3c64xx/cpu_init.S @@ -24,7 +24,7 @@ */ #include -#include +#include .globl mem_ctrl_asm_init mem_ctrl_asm_init: diff --git a/cpu/arm1176/s3c64xx/reset.S b/cpu/arm1176/s3c64xx/reset.S index 315b13f8d..eae572e4f 100644 --- a/cpu/arm1176/s3c64xx/reset.S +++ b/cpu/arm1176/s3c64xx/reset.S @@ -21,7 +21,7 @@ * MA 02111-1307 USA */ -#include +#include .globl reset_cpu reset_cpu: diff --git a/cpu/arm1176/s3c64xx/speed.c b/cpu/arm1176/s3c64xx/speed.c index 5c335a55a..11962acad 100644 --- a/cpu/arm1176/s3c64xx/speed.c +++ b/cpu/arm1176/s3c64xx/speed.c @@ -31,7 +31,7 @@ */ #include -#include +#include #define APLL 0 #define MPLL 1 diff --git a/cpu/arm1176/s3c64xx/timer.c b/cpu/arm1176/s3c64xx/timer.c index 22a5b7770..85ce9cd99 100644 --- a/cpu/arm1176/s3c64xx/timer.c +++ b/cpu/arm1176/s3c64xx/timer.c @@ -40,7 +40,7 @@ #include #include -#include +#include #include static ulong timer_load_val; diff --git a/cpu/arm1176/start.S b/cpu/arm1176/start.S index cb891df17..2bb9bf208 100644 --- a/cpu/arm1176/start.S +++ b/cpu/arm1176/start.S @@ -35,7 +35,7 @@ #ifdef CONFIG_ENABLE_MMU #include #endif -#include +#include #if !defined(CONFIG_ENABLE_MMU) && !defined(CONFIG_SYS_PHY_UBOOT_BASE) #define CONFIG_SYS_PHY_UBOOT_BASE CONFIG_SYS_UBOOT_BASE diff --git a/drivers/mtd/nand/s3c64xx.c b/drivers/mtd/nand/s3c64xx.c index edaf55a14..084e47564 100644 --- a/drivers/mtd/nand/s3c64xx.c +++ b/drivers/mtd/nand/s3c64xx.c @@ -28,7 +28,7 @@ #include #include -#include +#include #include #include diff --git a/drivers/serial/s3c64xx.c b/drivers/serial/s3c64xx.c index 1b974e04f..6d22df7cf 100644 --- a/drivers/serial/s3c64xx.c +++ b/drivers/serial/s3c64xx.c @@ -23,7 +23,7 @@ #include -#include +#include #ifdef CONFIG_SERIAL1 #define UART_NR S3C64XX_UART0 diff --git a/drivers/usb/host/s3c64xx-hcd.c b/drivers/usb/host/s3c64xx-hcd.c index 274a4ed30..cd295dabb 100644 --- a/drivers/usb/host/s3c64xx-hcd.c +++ b/drivers/usb/host/s3c64xx-hcd.c @@ -25,7 +25,7 @@ */ #include -#include +#include int usb_cpu_init(void) { diff --git a/include/asm-arm/arch-s3c64xx/s3c6400.h b/include/asm-arm/arch-s3c64xx/s3c6400.h new file mode 100644 index 000000000..e527c08b1 --- /dev/null +++ b/include/asm-arm/arch-s3c64xx/s3c6400.h @@ -0,0 +1,895 @@ +/* + * (C) Copyright 2007 + * Byungjae Lee, Samsung Erectronics, bjlee@samsung.com. + * - only support for S3C6400 + * + * (C) Copyright 2008 + * Guennadi Liakhovetki, DENX Software Engineering, + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/************************************************ + * NAME : s3c6400.h + * + * Based on S3C6400 User's manual Rev 0.0 + ************************************************/ + +#ifndef __S3C6400_H__ +#define __S3C6400_H__ + +#define S3C64XX_UART_CHANNELS 3 +#define S3C64XX_SPI_CHANNELS 2 + +#include + +#define ELFIN_CLOCK_POWER_BASE 0x7e00f000 + +/* Clock & Power Controller for mDirac3*/ +#define APLL_LOCK_OFFSET 0x00 +#define MPLL_LOCK_OFFSET 0x04 +#define EPLL_LOCK_OFFSET 0x08 +#define APLL_CON_OFFSET 0x0C +#define MPLL_CON_OFFSET 0x10 +#define EPLL_CON0_OFFSET 0x14 +#define EPLL_CON1_OFFSET 0x18 +#define CLK_SRC_OFFSET 0x1C +#define CLK_DIV0_OFFSET 0x20 +#define CLK_DIV1_OFFSET 0x24 +#define CLK_DIV2_OFFSET 0x28 +#define CLK_OUT_OFFSET 0x2C +#define HCLK_GATE_OFFSET 0x30 +#define PCLK_GATE_OFFSET 0x34 +#define SCLK_GATE_OFFSET 0x38 +#define AHB_CON0_OFFSET 0x100 +#define AHB_CON1_OFFSET 0x104 +#define AHB_CON2_OFFSET 0x108 +#define SELECT_DMA_OFFSET 0x110 +#define SW_RST_OFFSET 0x114 +#define SYS_ID_OFFSET 0x118 +#define MEM_SYS_CFG_OFFSET 0x120 +#define QOS_OVERRIDE0_OFFSET 0x124 +#define QOS_OVERRIDE1_OFFSET 0x128 +#define MEM_CFG_STAT_OFFSET 0x12C +#define PWR_CFG_OFFSET 0x804 +#define EINT_MASK_OFFSET 0x808 +#define NOR_CFG_OFFSET 0x810 +#define STOP_CFG_OFFSET 0x814 +#define SLEEP_CFG_OFFSET 0x818 +#define OSC_FREQ_OFFSET 0x820 +#define OSC_STABLE_OFFSET 0x824 +#define PWR_STABLE_OFFSET 0x828 +#define FPC_STABLE_OFFSET 0x82C +#define MTC_STABLE_OFFSET 0x830 +#define OTHERS_OFFSET 0x900 +#define RST_STAT_OFFSET 0x904 +#define WAKEUP_STAT_OFFSET 0x908 +#define BLK_PWR_STAT_OFFSET 0x90C +#define INF_REG0_OFFSET 0xA00 +#define INF_REG1_OFFSET 0xA04 +#define INF_REG2_OFFSET 0xA08 +#define INF_REG3_OFFSET 0xA0C +#define INF_REG4_OFFSET 0xA10 +#define INF_REG5_OFFSET 0xA14 +#define INF_REG6_OFFSET 0xA18 +#define INF_REG7_OFFSET 0xA1C + +#define OSC_CNT_VAL_OFFSET 0x824 +#define PWR_CNT_VAL_OFFSET 0x828 +#define FPC_CNT_VAL_OFFSET 0x82C +#define MTC_CNT_VAL_OFFSET 0x830 + +#define APLL_LOCK_REG __REG(ELFIN_CLOCK_POWER_BASE + APLL_LOCK_OFFSET) +#define MPLL_LOCK_REG __REG(ELFIN_CLOCK_POWER_BASE + MPLL_LOCK_OFFSET) +#define EPLL_LOCK_REG __REG(ELFIN_CLOCK_POWER_BASE + EPLL_LOCK_OFFSET) +#define APLL_CON_REG __REG(ELFIN_CLOCK_POWER_BASE + APLL_CON_OFFSET) +#define MPLL_CON_REG __REG(ELFIN_CLOCK_POWER_BASE + MPLL_CON_OFFSET) +#define EPLL_CON0_REG __REG(ELFIN_CLOCK_POWER_BASE + EPLL_CON0_OFFSET) +#define EPLL_CON1_REG __REG(ELFIN_CLOCK_POWER_BASE + EPLL_CON1_OFFSET) +#define CLK_SRC_REG __REG(ELFIN_CLOCK_POWER_BASE + CLK_SRC_OFFSET) +#define CLK_DIV0_REG __REG(ELFIN_CLOCK_POWER_BASE + CLK_DIV0_OFFSET) +#define CLK_DIV1_REG __REG(ELFIN_CLOCK_POWER_BASE + CLK_DIV1_OFFSET) +#define CLK_DIV2_REG __REG(ELFIN_CLOCK_POWER_BASE + CLK_DIV2_OFFSET) +#define CLK_OUT_REG __REG(ELFIN_CLOCK_POWER_BASE + CLK_OUT_OFFSET) +#define HCLK_GATE_REG __REG(ELFIN_CLOCK_POWER_BASE + HCLK_GATE_OFFSET) +#define PCLK_GATE_REG __REG(ELFIN_CLOCK_POWER_BASE + PCLK_GATE_OFFSET) +#define SCLK_GATE_REG __REG(ELFIN_CLOCK_POWER_BASE + SCLK_GATE_OFFSET) +#define AHB_CON0_REG __REG(ELFIN_CLOCK_POWER_BASE + AHB_CON0_OFFSET) +#define AHB_CON1_REG __REG(ELFIN_CLOCK_POWER_BASE + AHB_CON1_OFFSET) +#define AHB_CON2_REG __REG(ELFIN_CLOCK_POWER_BASE + AHB_CON2_OFFSET) +#define SELECT_DMA_REG __REG(ELFIN_CLOCK_POWER_BASE + \ + SELECT_DMA_OFFSET) +#define SW_RST_REG __REG(ELFIN_CLOCK_POWER_BASE + SW_RST_OFFSET) +#define SYS_ID_REG __REG(ELFIN_CLOCK_POWER_BASE + SYS_ID_OFFSET) +#define MEM_SYS_CFG_REG __REG(ELFIN_CLOCK_POWER_BASE + \ + MEM_SYS_CFG_OFFSET) +#define QOS_OVERRIDE0_REG __REG(ELFIN_CLOCK_POWER_BASE + \ + QOS_OVERRIDE0_OFFSET) +#define QOS_OVERRIDE1_REG __REG(ELFIN_CLOCK_POWER_BASE + \ + QOS_OVERRIDE1_OFFSET) +#define MEM_CFG_STAT_REG __REG(ELFIN_CLOCK_POWER_BASE + \ + MEM_CFG_STAT_OFFSET) +#define PWR_CFG_REG __REG(ELFIN_CLOCK_POWER_BASE + PWR_CFG_OFFSET) +#define EINT_MASK_REG __REG(ELFIN_CLOCK_POWER_BASE + EINT_MASK_OFFSET) +#define NOR_CFG_REG __REG(ELFIN_CLOCK_POWER_BASE + NOR_CFG_OFFSET) +#define STOP_CFG_REG __REG(ELFIN_CLOCK_POWER_BASE + STOP_CFG_OFFSET) +#define SLEEP_CFG_REG __REG(ELFIN_CLOCK_POWER_BASE + SLEEP_CFG_OFFSET) +#define OSC_FREQ_REG __REG(ELFIN_CLOCK_POWER_BASE + OSC_FREQ_OFFSET) +#define OSC_CNT_VAL_REG __REG(ELFIN_CLOCK_POWER_BASE + \ + OSC_CNT_VAL_OFFSET) +#define PWR_CNT_VAL_REG __REG(ELFIN_CLOCK_POWER_BASE + \ + PWR_CNT_VAL_OFFSET) +#define FPC_CNT_VAL_REG __REG(ELFIN_CLOCK_POWER_BASE + \ + FPC_CNT_VAL_OFFSET) +#define MTC_CNT_VAL_REG __REG(ELFIN_CLOCK_POWER_BASE + \ + MTC_CNT_VAL_OFFSET) +#define OTHERS_REG __REG(ELFIN_CLOCK_POWER_BASE + OTHERS_OFFSET) +#define RST_STAT_REG __REG(ELFIN_CLOCK_POWER_BASE + RST_STAT_OFFSET) +#define WAKEUP_STAT_REG __REG(ELFIN_CLOCK_POWER_BASE + \ + WAKEUP_STAT_OFFSET) +#define BLK_PWR_STAT_REG __REG(ELFIN_CLOCK_POWER_BASE + \ + BLK_PWR_STAT_OFFSET) +#define INF_REG0_REG __REG(ELFIN_CLOCK_POWER_BASE + INF_REG0_OFFSET) +#define INF_REG1_REG __REG(ELFIN_CLOCK_POWER_BASE + INF_REG1_OFFSET) +#define INF_REG2_REG __REG(ELFIN_CLOCK_POWER_BASE + INF_REG2_OFFSET) +#define INF_REG3_REG __REG(ELFIN_CLOCK_POWER_BASE + INF_REG3_OFFSET) +#define INF_REG4_REG __REG(ELFIN_CLOCK_POWER_BASE + INF_REG4_OFFSET) +#define INF_REG5_REG __REG(ELFIN_CLOCK_POWER_BASE + INF_REG5_OFFSET) +#define INF_REG6_REG __REG(ELFIN_CLOCK_POWER_BASE + INF_REG6_OFFSET) +#define INF_REG7_REG __REG(ELFIN_CLOCK_POWER_BASE + INF_REG7_OFFSET) + +#define APLL_LOCK (ELFIN_CLOCK_POWER_BASE + APLL_LOCK_OFFSET) +#define MPLL_LOCK (ELFIN_CLOCK_POWER_BASE + MPLL_LOCK_OFFSET) +#define EPLL_LOCK (ELFIN_CLOCK_POWER_BASE + EPLL_LOCK_OFFSET) +#define APLL_CON (ELFIN_CLOCK_POWER_BASE + APLL_CON_OFFSET) +#define MPLL_CON (ELFIN_CLOCK_POWER_BASE + MPLL_CON_OFFSET) +#define EPLL_CON0 (ELFIN_CLOCK_POWER_BASE + EPLL_CON0_OFFSET) +#define EPLL_CON1 (ELFIN_CLOCK_POWER_BASE + EPLL_CON1_OFFSET) +#define CLK_SRC (ELFIN_CLOCK_POWER_BASE + CLK_SRC_OFFSET) +#define CLK_DIV0 (ELFIN_CLOCK_POWER_BASE + CLK_DIV0_OFFSET) +#define CLK_DIV1 (ELFIN_CLOCK_POWER_BASE + CLK_DIV1_OFFSET) +#define CLK_DIV2 (ELFIN_CLOCK_POWER_BASE + CLK_DIV2_OFFSET) +#define CLK_OUT (ELFIN_CLOCK_POWER_BASE + CLK_OUT_OFFSET) +#define HCLK_GATE (ELFIN_CLOCK_POWER_BASE + HCLK_GATE_OFFSET) +#define PCLK_GATE (ELFIN_CLOCK_POWER_BASE + PCLK_GATE_OFFSET) +#define SCLK_GATE (ELFIN_CLOCK_POWER_BASE + SCLK_GATE_OFFSET) +#define AHB_CON0 (ELFIN_CLOCK_POWER_BASE + AHB_CON0_OFFSET) +#define AHB_CON1 (ELFIN_CLOCK_POWER_BASE + AHB_CON1_OFFSET) +#define AHB_CON2 (ELFIN_CLOCK_POWER_BASE + AHB_CON2_OFFSET) +#define SELECT_DMA (ELFIN_CLOCK_POWER_BASE + SELECT_DMA_OFFSET) +#define SW_RST (ELFIN_CLOCK_POWER_BASE + SW_RST_OFFSET) +#define SYS_ID (ELFIN_CLOCK_POWER_BASE + SYS_ID_OFFSET) +#define MEM_SYS_CFG (ELFIN_CLOCK_POWER_BASE + MEM_SYS_CFG_OFFSET) +#define QOS_OVERRIDE0 (ELFIN_CLOCK_POWER_BASE + QOS_OVERRIDE0_OFFSET) +#define QOS_OVERRIDE1 (ELFIN_CLOCK_POWER_BASE + QOS_OVERRIDE1_OFFSET) +#define MEM_CFG_STAT (ELFIN_CLOCK_POWER_BASE + MEM_CFG_STAT_OFFSET) +#define PWR_CFG (ELFIN_CLOCK_POWER_BASE + PWR_CFG_OFFSET) +#define EINT_MASK (ELFIN_CLOCK_POWER_BASE + EINT_MASK_OFFSET) +#define NOR_CFG (ELFIN_CLOCK_POWER_BASE + NOR_CFG_OFFSET) +#define STOP_CFG (ELFIN_CLOCK_POWER_BASE + STOP_CFG_OFFSET) +#define SLEEP_CFG (ELFIN_CLOCK_POWER_BASE + SLEEP_CFG_OFFSET) +#define OSC_FREQ (ELFIN_CLOCK_POWER_BASE + OSC_FREQ_OFFSET) +#define OSC_CNT_VAL (ELFIN_CLOCK_POWER_BASE + OSC_CNT_VAL_OFFSET) +#define PWR_CNT_VAL (ELFIN_CLOCK_POWER_BASE + PWR_CNT_VAL_OFFSET) +#define FPC_CNT_VAL (ELFIN_CLOCK_POWER_BASE + FPC_CNT_VAL_OFFSET) +#define MTC_CNT_VAL (ELFIN_CLOCK_POWER_BASE + MTC_CNT_VAL_OFFSET) +#define OTHERS (ELFIN_CLOCK_POWER_BASE + OTHERS_OFFSET) +#define RST_STAT (ELFIN_CLOCK_POWER_BASE + RST_STAT_OFFSET) +#define WAKEUP_STAT (ELFIN_CLOCK_POWER_BASE + WAKEUP_STAT_OFFSET) +#define BLK_PWR_STAT (ELFIN_CLOCK_POWER_BASE + BLK_PWR_STAT_OFFSET) +#define INF_REG0 (ELFIN_CLOCK_POWER_BASE + INF_REG0_OFFSET) +#define INF_REG1 (ELFIN_CLOCK_POWER_BASE + INF_REG1_OFFSET) +#define INF_REG2 (ELFIN_CLOCK_POWER_BASE + INF_REG2_OFFSET) +#define INF_REG3 (ELFIN_CLOCK_POWER_BASE + INF_REG3_OFFSET) +#define INF_REG4 (ELFIN_CLOCK_POWER_BASE + INF_REG4_OFFSET) +#define INF_REG5 (ELFIN_CLOCK_POWER_BASE + INF_REG5_OFFSET) +#define INF_REG6 (ELFIN_CLOCK_POWER_BASE + INF_REG6_OFFSET) +#define INF_REG7 (ELFIN_CLOCK_POWER_BASE + INF_REG7_OFFSET) + + +/* + * GPIO + */ +#define ELFIN_GPIO_BASE 0x7f008000 + +#define GPACON_OFFSET 0x00 +#define GPADAT_OFFSET 0x04 +#define GPAPUD_OFFSET 0x08 +#define GPACONSLP_OFFSET 0x0C +#define GPAPUDSLP_OFFSET 0x10 +#define GPBCON_OFFSET 0x20 +#define GPBDAT_OFFSET 0x24 +#define GPBPUD_OFFSET 0x28 +#define GPBCONSLP_OFFSET 0x2C +#define GPBPUDSLP_OFFSET 0x30 +#define GPCCON_OFFSET 0x40 +#define GPCDAT_OFFSET 0x44 +#define GPCPUD_OFFSET 0x48 +#define GPCCONSLP_OFFSET 0x4C +#define GPCPUDSLP_OFFSET 0x50 +#define GPDCON_OFFSET 0x60 +#define GPDDAT_OFFSET 0x64 +#define GPDPUD_OFFSET 0x68 +#define GPDCONSLP_OFFSET 0x6C +#define GPDPUDSLP_OFFSET 0x70 +#define GPECON_OFFSET 0x80 +#define GPEDAT_OFFSET 0x84 +#define GPEPUD_OFFSET 0x88 +#define GPECONSLP_OFFSET 0x8C +#define GPEPUDSLP_OFFSET 0x90 +#define GPFCON_OFFSET 0xA0 +#define GPFDAT_OFFSET 0xA4 +#define GPFPUD_OFFSET 0xA8 +#define GPFCONSLP_OFFSET 0xAC +#define GPFPUDSLP_OFFSET 0xB0 +#define GPGCON_OFFSET 0xC0 +#define GPGDAT_OFFSET 0xC4 +#define GPGPUD_OFFSET 0xC8 +#define GPGCONSLP_OFFSET 0xCC +#define GPGPUDSLP_OFFSET 0xD0 +#define GPHCON0_OFFSET 0xE0 +#define GPHCON1_OFFSET 0xE4 +#define GPHDAT_OFFSET 0xE8 +#define GPHPUD_OFFSET 0xEC +#define GPHCONSLP_OFFSET 0xF0 +#define GPHPUDSLP_OFFSET 0xF4 +#define GPICON_OFFSET 0x100 +#define GPIDAT_OFFSET 0x104 +#define GPIPUD_OFFSET 0x108 +#define GPICONSLP_OFFSET 0x10C +#define GPIPUDSLP_OFFSET 0x110 +#define GPJCON_OFFSET 0x120 +#define GPJDAT_OFFSET 0x124 +#define GPJPUD_OFFSET 0x128 +#define GPJCONSLP_OFFSET 0x12C +#define GPJPUDSLP_OFFSET 0x130 +#define MEM0DRVCON_OFFSET 0x1D0 +#define MEM1DRVCON_OFFSET 0x1D4 +#define GPKCON0_OFFSET 0x800 +#define GPKCON1_OFFSET 0x804 +#define GPKDAT_OFFSET 0x808 +#define GPKPUD_OFFSET 0x80C +#define GPLCON0_OFFSET 0x810 +#define GPLCON1_OFFSET 0x814 +#define GPLDAT_OFFSET 0x818 +#define GPLPUD_OFFSET 0x81C +#define GPMCON_OFFSET 0x820 +#define GPMDAT_OFFSET 0x824 +#define GPMPUD_OFFSET 0x828 +#define GPNCON_OFFSET 0x830 +#define GPNDAT_OFFSET 0x834 +#define GPNPUD_OFFSET 0x838 +#define GPOCON_OFFSET 0x140 +#define GPODAT_OFFSET 0x144 +#define GPOPUD_OFFSET 0x148 +#define GPOCONSLP_OFFSET 0x14C +#define GPOPUDSLP_OFFSET 0x150 +#define GPPCON_OFFSET 0x160 +#define GPPDAT_OFFSET 0x164 +#define GPPPUD_OFFSET 0x168 +#define GPPCONSLP_OFFSET 0x16C +#define GPPPUDSLP_OFFSET 0x170 +#define GPQCON_OFFSET 0x180 +#define GPQDAT_OFFSET 0x184 +#define GPQPUD_OFFSET 0x188 +#define GPQCONSLP_OFFSET 0x18C +#define GPQPUDSLP_OFFSET 0x190 + +#define EINTPEND_OFFSET 0x924 + +#define GPACON_REG __REG(ELFIN_GPIO_BASE + GPACON_OFFSET) +#define GPADAT_REG __REG(ELFIN_GPIO_BASE + GPADAT_OFFSET) +#define GPAPUD_REG __REG(ELFIN_GPIO_BASE + GPAPUD_OFFSET) +#define GPACONSLP_REG __REG(ELFIN_GPIO_BASE + GPACONSLP_OFFSET) +#define GPAPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPAPUDSLP_OFFSET) +#define GPBCON_REG __REG(ELFIN_GPIO_BASE + GPBCON_OFFSET) +#define GPBDAT_REG __REG(ELFIN_GPIO_BASE + GPBDAT_OFFSET) +#define GPBPUD_REG __REG(ELFIN_GPIO_BASE + GPBPUD_OFFSET) +#define GPBCONSLP_REG __REG(ELFIN_GPIO_BASE + GPBCONSLP_OFFSET) +#define GPBPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPBPUDSLP_OFFSET) +#define GPCCON_REG __REG(ELFIN_GPIO_BASE + GPCCON_OFFSET) +#define GPCDAT_REG __REG(ELFIN_GPIO_BASE + GPCDAT_OFFSET) +#define GPCPUD_REG __REG(ELFIN_GPIO_BASE + GPCPUD_OFFSET) +#define GPCCONSLP_REG __REG(ELFIN_GPIO_BASE + GPCCONSLP_OFFSET) +#define GPCPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPCPUDSLP_OFFSET) +#define GPDCON_REG __REG(ELFIN_GPIO_BASE + GPDCON_OFFSET) +#define GPDDAT_REG __REG(ELFIN_GPIO_BASE + GPDDAT_OFFSET) +#define GPDPUD_REG __REG(ELFIN_GPIO_BASE + GPDPUD_OFFSET) +#define GPDCONSLP_REG __REG(ELFIN_GPIO_BASE + GPDCONSLP_OFFSET) +#define GPDPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPDPUDSLP_OFFSET) +#define GPECON_REG __REG(ELFIN_GPIO_BASE + GPECON_OFFSET) +#define GPEDAT_REG __REG(ELFIN_GPIO_BASE + GPEDAT_OFFSET) +#define GPEPUD_REG __REG(ELFIN_GPIO_BASE + GPEPUD_OFFSET) +#define GPECONSLP_REG __REG(ELFIN_GPIO_BASE + GPECONSLP_OFFSET) +#define GPEPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPEPUDSLP_OFFSET) +#define GPFCON_REG __REG(ELFIN_GPIO_BASE + GPFCON_OFFSET) +#define GPFDAT_REG __REG(ELFIN_GPIO_BASE + GPFDAT_OFFSET) +#define GPFPUD_REG __REG(ELFIN_GPIO_BASE + GPFPUD_OFFSET) +#define GPFCONSLP_REG __REG(ELFIN_GPIO_BASE + GPFCONSLP_OFFSET) +#define GPFPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPFPUDSLP_OFFSET) +#define GPGCON_REG __REG(ELFIN_GPIO_BASE + GPGCON_OFFSET) +#define GPGDAT_REG __REG(ELFIN_GPIO_BASE + GPGDAT_OFFSET) +#define GPGPUD_REG __REG(ELFIN_GPIO_BASE + GPGPUD_OFFSET) +#define GPGCONSLP_REG __REG(ELFIN_GPIO_BASE + GPGCONSLP_OFFSET) +#define GPGPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPGPUDSLP_OFFSET) +#define GPHCON0_REG __REG(ELFIN_GPIO_BASE + GPHCON0_OFFSET) +#define GPHCON1_REG __REG(ELFIN_GPIO_BASE + GPHCON1_OFFSET) +#define GPHDAT_REG __REG(ELFIN_GPIO_BASE + GPHDAT_OFFSET) +#define GPHPUD_REG __REG(ELFIN_GPIO_BASE + GPHPUD_OFFSET) +#define GPHCONSLP_REG __REG(ELFIN_GPIO_BASE + GPHCONSLP_OFFSET) +#define GPHPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPHPUDSLP_OFFSET) +#define GPICON_REG __REG(ELFIN_GPIO_BASE + GPICON_OFFSET) +#define GPIDAT_REG __REG(ELFIN_GPIO_BASE + GPIDAT_OFFSET) +#define GPIPUD_REG __REG(ELFIN_GPIO_BASE + GPIPUD_OFFSET) +#define GPICONSLP_REG __REG(ELFIN_GPIO_BASE + GPICONSLP_OFFSET) +#define GPIPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPIPUDSLP_OFFSET) +#define GPJCON_REG __REG(ELFIN_GPIO_BASE + GPJCON_OFFSET) +#define GPJDAT_REG __REG(ELFIN_GPIO_BASE + GPJDAT_OFFSET) +#define GPJPUD_REG __REG(ELFIN_GPIO_BASE + GPJPUD_OFFSET) +#define GPJCONSLP_REG __REG(ELFIN_GPIO_BASE + GPJCONSLP_OFFSET) +#define GPJPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPJPUDSLP_OFFSET) +#define GPKCON0_REG __REG(ELFIN_GPIO_BASE + GPKCON0_OFFSET) +#define GPKCON1_REG __REG(ELFIN_GPIO_BASE + GPKCON1_OFFSET) +#define GPKDAT_REG __REG(ELFIN_GPIO_BASE + GPKDAT_OFFSET) +#define GPKPUD_REG __REG(ELFIN_GPIO_BASE + GPKPUD_OFFSET) +#define GPLCON0_REG __REG(ELFIN_GPIO_BASE + GPLCON0_OFFSET) +#define GPLCON1_REG __REG(ELFIN_GPIO_BASE + GPLCON1_OFFSET) +#define GPLDAT_REG __REG(ELFIN_GPIO_BASE + GPLDAT_OFFSET) +#define GPLPUD_REG __REG(ELFIN_GPIO_BASE + GPLPUD_OFFSET) +#define GPMCON_REG __REG(ELFIN_GPIO_BASE + GPMCON_OFFSET) +#define GPMDAT_REG __REG(ELFIN_GPIO_BASE + GPMDAT_OFFSET) +#define GPMPUD_REG __REG(ELFIN_GPIO_BASE + GPMPUD_OFFSET) +#define GPNCON_REG __REG(ELFIN_GPIO_BASE + GPNCON_OFFSET) +#define GPNDAT_REG __REG(ELFIN_GPIO_BASE + GPNDAT_OFFSET) +#define GPNPUD_REG __REG(ELFIN_GPIO_BASE + GPNPUD_OFFSET) +#define GPOCON_REG __REG(ELFIN_GPIO_BASE + GPOCON_OFFSET) +#define GPODAT_REG __REG(ELFIN_GPIO_BASE + GPODAT_OFFSET) +#define GPOPUD_REG __REG(ELFIN_GPIO_BASE + GPOPUD_OFFSET) +#define GPOCONSLP_REG __REG(ELFIN_GPIO_BASE + GPOCONSLP_OFFSET) +#define GPOPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPOPUDSLP_OFFSET) +#define GPPCON_REG __REG(ELFIN_GPIO_BASE + GPPCON_OFFSET) +#define GPPDAT_REG __REG(ELFIN_GPIO_BASE + GPPDAT_OFFSET) +#define GPPPUD_REG __REG(ELFIN_GPIO_BASE + GPPPUD_OFFSET) +#define GPPCONSLP_REG __REG(ELFIN_GPIO_BASE + GPPCONSLP_OFFSET) +#define GPPPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPPPUDSLP_OFFSET) +#define GPQCON_REG __REG(ELFIN_GPIO_BASE + GPQCON_OFFSET) +#define GPQDAT_REG __REG(ELFIN_GPIO_BASE + GPQDAT_OFFSET) +#define GPQPUD_REG __REG(ELFIN_GPIO_BASE + GPQPUD_OFFSET) +#define GPQCONSLP_REG __REG(ELFIN_GPIO_BASE + GPQCONSLP_OFFSET) +#define GPQPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPQPUDSLP_OFFSET) + +/* + * Bus Matrix + */ +#define ELFIN_MEM_SYS_CFG 0x7e00f120 + +#define S3C64XX_MEM_SYS_CFG_16BIT (1 << 12) + +#define S3C64XX_MEM_SYS_CFG_NAND 0x0008 +#define S3C64XX_MEM_SYS_CFG_ONENAND S3C64XX_MEM_SYS_CFG_16BIT + +#define GPACON (ELFIN_GPIO_BASE + GPACON_OFFSET) +#define GPADAT (ELFIN_GPIO_BASE + GPADAT_OFFSET) +#define GPAPUD (ELFIN_GPIO_BASE + GPAPUD_OFFSET) +#define GPACONSLP (ELFIN_GPIO_BASE + GPACONSLP_OFFSET) +#define GPAPUDSLP (ELFIN_GPIO_BASE + GPAPUDSLP_OFFSET) +#define GPBCON (ELFIN_GPIO_BASE + GPBCON_OFFSET) +#define GPBDAT (ELFIN_GPIO_BASE + GPBDAT_OFFSET) +#define GPBPUD (ELFIN_GPIO_BASE + GPBPUD_OFFSET) +#define GPBCONSLP (ELFIN_GPIO_BASE + GPBCONSLP_OFFSET) +#define GPBPUDSLP (ELFIN_GPIO_BASE + GPBPUDSLP_OFFSET) +#define GPCCON (ELFIN_GPIO_BASE + GPCCON_OFFSET) +#define GPCDAT (ELFIN_GPIO_BASE + GPCDAT_OFFSET) +#define GPCPUD (ELFIN_GPIO_BASE + GPCPUD_OFFSET) +#define GPCCONSLP (ELFIN_GPIO_BASE + GPCCONSLP_OFFSET) +#define GPCPUDSLP (ELFIN_GPIO_BASE + GPCPUDSLP_OFFSET) +#define GPDCON (ELFIN_GPIO_BASE + GPDCON_OFFSET) +#define GPDDAT (ELFIN_GPIO_BASE + GPDDAT_OFFSET) +#define GPDPUD (ELFIN_GPIO_BASE + GPDPUD_OFFSET) +#define GPDCONSLP (ELFIN_GPIO_BASE + GPDCONSLP_OFFSET) +#define GPDPUDSLP (ELFIN_GPIO_BASE + GPDPUDSLP_OFFSET) +#define GPECON (ELFIN_GPIO_BASE + GPECON_OFFSET) +#define GPEDAT (ELFIN_GPIO_BASE + GPEDAT_OFFSET) +#define GPEPUD (ELFIN_GPIO_BASE + GPEPUD_OFFSET) +#define GPECONSLP (ELFIN_GPIO_BASE + GPECONSLP_OFFSET) +#define GPEPUDSLP (ELFIN_GPIO_BASE + GPEPUDSLP_OFFSET) +#define GPFCON (ELFIN_GPIO_BASE + GPFCON_OFFSET) +#define GPFDAT (ELFIN_GPIO_BASE + GPFDAT_OFFSET) +#define GPFPUD (ELFIN_GPIO_BASE + GPFPUD_OFFSET) +#define GPFCONSLP (ELFIN_GPIO_BASE + GPFCONSLP_OFFSET) +#define GPFPUDSLP (ELFIN_GPIO_BASE + GPFPUDSLP_OFFSET) +#define GPGCON (ELFIN_GPIO_BASE + GPGCON_OFFSET) +#define GPGDAT (ELFIN_GPIO_BASE + GPGDAT_OFFSET) +#define GPGPUD (ELFIN_GPIO_BASE + GPGPUD_OFFSET) +#define GPGCONSLP (ELFIN_GPIO_BASE + GPGCONSLP_OFFSET) +#define GPGPUDSLP (ELFIN_GPIO_BASE + GPGPUDSLP_OFFSET) +#define GPHCON0 (ELFIN_GPIO_BASE + GPHCON0_OFFSET) +#define GPHCON1 (ELFIN_GPIO_BASE + GPHCON1_OFFSET) +#define GPHDAT (ELFIN_GPIO_BASE + GPHDAT_OFFSET) +#define GPHPUD (ELFIN_GPIO_BASE + GPHPUD_OFFSET) +#define GPHCONSLP (ELFIN_GPIO_BASE + GPHCONSLP_OFFSET) +#define GPHPUDSLP (ELFIN_GPIO_BASE + GPHPUDSLP_OFFSET) +#define GPICON (ELFIN_GPIO_BASE + GPICON_OFFSET) +#define GPIDAT (ELFIN_GPIO_BASE + GPIDAT_OFFSET) +#define GPIPUD (ELFIN_GPIO_BASE + GPIPUD_OFFSET) +#define GPICONSLP (ELFIN_GPIO_BASE + GPICONSLP_OFFSET) +#define GPIPUDSLP (ELFIN_GPIO_BASE + GPIPUDSLP_OFFSET) +#define GPJCON (ELFIN_GPIO_BASE + GPJCON_OFFSET) +#define GPJDAT (ELFIN_GPIO_BASE + GPJDAT_OFFSET) +#define GPJPUD (ELFIN_GPIO_BASE + GPJPUD_OFFSET) +#define GPJCONSLP (ELFIN_GPIO_BASE + GPJCONSLP_OFFSET) +#define GPJPUDSLP (ELFIN_GPIO_BASE + GPJPUDSLP_OFFSET) +#define GPKCON0 (ELFIN_GPIO_BASE + GPKCON0_OFFSET) +#define GPKCON1 (ELFIN_GPIO_BASE + GPKCON1_OFFSET) +#define GPKDAT (ELFIN_GPIO_BASE + GPKDAT_OFFSET) +#define GPKPUD (ELFIN_GPIO_BASE + GPKPUD_OFFSET) +#define GPLCON0 (ELFIN_GPIO_BASE + GPLCON0_OFFSET) +#define GPLCON1 (ELFIN_GPIO_BASE + GPLCON1_OFFSET) +#define GPLDAT (ELFIN_GPIO_BASE + GPLDAT_OFFSET) +#define GPLPUD (ELFIN_GPIO_BASE + GPLPUD_OFFSET) +#define GPMCON (ELFIN_GPIO_BASE + GPMCON_OFFSET) +#define GPMDAT (ELFIN_GPIO_BASE + GPMDAT_OFFSET) +#define GPMPUD (ELFIN_GPIO_BASE + GPMPUD_OFFSET) +#define GPNCON (ELFIN_GPIO_BASE + GPNCON_OFFSET) +#define GPNDAT (ELFIN_GPIO_BASE + GPNDAT_OFFSET) +#define GPNPUD (ELFIN_GPIO_BASE + GPNPUD_OFFSET) +#define GPOCON (ELFIN_GPIO_BASE + GPOCON_OFFSET) +#define GPODAT (ELFIN_GPIO_BASE + GPODAT_OFFSET) +#define GPOPUD (ELFIN_GPIO_BASE + GPOPUD_OFFSET) +#define GPOCONSLP (ELFIN_GPIO_BASE + GPOCONSLP_OFFSET) +#define GPOPUDSLP (ELFIN_GPIO_BASE + GPOPUDSLP_OFFSET) +#define GPPCON (ELFIN_GPIO_BASE + GPPCON_OFFSET) +#define GPPDAT (ELFIN_GPIO_BASE + GPPDAT_OFFSET) +#define GPPPUD (ELFIN_GPIO_BASE + GPPPUD_OFFSET) +#define GPPCONSLP (ELFIN_GPIO_BASE + GPPCONSLP_OFFSET) +#define GPPPUDSLP (ELFIN_GPIO_BASE + GPPPUDSLP_OFFSET) +#define GPQCON (ELFIN_GPIO_BASE + GPQCON_OFFSET) +#define GPQDAT (ELFIN_GPIO_BASE + GPQDAT_OFFSET) +#define GPQPUD (ELFIN_GPIO_BASE + GPQPUD_OFFSET) +#define GPQCONSLP (ELFIN_GPIO_BASE + GPQCONSLP_OFFSET) +#define GPQPUDSLP (ELFIN_GPIO_BASE + GPQPUDSLP_OFFSET) + +/* + * Memory controller + */ +#define ELFIN_SROM_BASE 0x70000000 + +#define SROM_BW_REG __REG(ELFIN_SROM_BASE + 0x0) +#define SROM_BC0_REG __REG(ELFIN_SROM_BASE + 0x4) +#define SROM_BC1_REG __REG(ELFIN_SROM_BASE + 0x8) +#define SROM_BC2_REG __REG(ELFIN_SROM_BASE + 0xC) +#define SROM_BC3_REG __REG(ELFIN_SROM_BASE + 0x10) +#define SROM_BC4_REG __REG(ELFIN_SROM_BASE + 0x14) +#define SROM_BC5_REG __REG(ELFIN_SROM_BASE + 0x18) + +/* + * SDRAM Controller + */ +#define ELFIN_DMC0_BASE 0x7e000000 +#define ELFIN_DMC1_BASE 0x7e001000 + +#define INDEX_DMC_MEMC_STATUS 0x00 +#define INDEX_DMC_MEMC_CMD 0x04 +#define INDEX_DMC_DIRECT_CMD 0x08 +#define INDEX_DMC_MEMORY_CFG 0x0C +#define INDEX_DMC_REFRESH_PRD 0x10 +#define INDEX_DMC_CAS_LATENCY 0x14 +#define INDEX_DMC_T_DQSS 0x18 +#define INDEX_DMC_T_MRD 0x1C +#define INDEX_DMC_T_RAS 0x20 +#define INDEX_DMC_T_RC 0x24 +#define INDEX_DMC_T_RCD 0x28 +#define INDEX_DMC_T_RFC 0x2C +#define INDEX_DMC_T_RP 0x30 +#define INDEX_DMC_T_RRD 0x34 +#define INDEX_DMC_T_WR 0x38 +#define INDEX_DMC_T_WTR 0x3C +#define INDEX_DMC_T_XP 0x40 +#define INDEX_DMC_T_XSR 0x44 +#define INDEX_DMC_T_ESR 0x48 +#define INDEX_DMC_MEMORY_CFG2 0x4C +#define INDEX_DMC_CHIP_0_CFG 0x200 +#define INDEX_DMC_CHIP_1_CFG 0x204 +#define INDEX_DMC_CHIP_2_CFG 0x208 +#define INDEX_DMC_CHIP_3_CFG 0x20C +#define INDEX_DMC_USER_STATUS 0x300 +#define INDEX_DMC_USER_CONFIG 0x304 + +/* + * Memory Chip direct command + */ +#define DMC_NOP0 0x0c0000 +#define DMC_NOP1 0x1c0000 +#define DMC_PA0 0x000000 /* Precharge all */ +#define DMC_PA1 0x100000 +#define DMC_AR0 0x040000 /* Autorefresh */ +#define DMC_AR1 0x140000 +#define DMC_SDR_MR0 0x080032 /* MRS, CAS 3, Burst Length 4 */ +#define DMC_SDR_MR1 0x180032 +#define DMC_DDR_MR0 0x080162 +#define DMC_DDR_MR1 0x180162 +#define DMC_mDDR_MR0 0x080032 /* CAS 3, Burst Length 4 */ +#define DMC_mDDR_MR1 0x180032 +#define DMC_mSDR_EMR0 0x0a0000 /* EMRS, DS:Full, PASR:Full Array */ +#define DMC_mSDR_EMR1 0x1a0000 +#define DMC_DDR_EMR0 0x090000 +#define DMC_DDR_EMR1 0x190000 +#define DMC_mDDR_EMR0 0x0a0000 /* DS:Full, PASR:Full Array */ +#define DMC_mDDR_EMR1 0x1a0000 + +/* + * Definitions for memory configuration + * Set memory configuration + * active_chips = 1'b0 (1 chip) + * qos_master_chip = 3'b000(ARID[3:0]) + * memory burst = 3'b010(burst 4) + * stop_mem_clock = 1'b0(disable dynamical stop) + * auto_power_down = 1'b0(disable auto power-down mode) + * power_down_prd = 6'b00_0000(0 cycle for auto power-down) + * ap_bit = 1'b0 (bit position of auto-precharge is 10) + * row_bits = 3'b010(# row address 13) + * column_bits = 3'b010(# column address 10 ) + * + * Set user configuration + * 2'b10=SDRAM/mSDRAM, 2'b11=DDR, 2'b01=mDDR + * + * Set chip select for chip [n] + * row bank control, bank address 0x3000_0000 ~ 0x37ff_ffff + * CHIP_[n]_CFG=0x30F8, 30: ADDR[31:24], F8: Mask[31:24] + */ + +/* + * Nand flash controller + */ +#define ELFIN_NAND_BASE 0x70200000 + +#define NFCONF_OFFSET 0x00 +#define NFCONT_OFFSET 0x04 +#define NFCMMD_OFFSET 0x08 +#define NFADDR_OFFSET 0x0c +#define NFDATA_OFFSET 0x10 +#define NFMECCDATA0_OFFSET 0x14 +#define NFMECCDATA1_OFFSET 0x18 +#define NFSECCDATA0_OFFSET 0x1c +#define NFSBLK_OFFSET 0x20 +#define NFEBLK_OFFSET 0x24 +#define NFSTAT_OFFSET 0x28 +#define NFESTAT0_OFFSET 0x2c +#define NFESTAT1_OFFSET 0x30 +#define NFMECC0_OFFSET 0x34 +#define NFMECC1_OFFSET 0x38 +#define NFSECC_OFFSET 0x3c +#define NFMLCBITPT_OFFSET 0x40 + +#define NFCONF (ELFIN_NAND_BASE + NFCONF_OFFSET) +#define NFCONT (ELFIN_NAND_BASE + NFCONT_OFFSET) +#define NFCMMD (ELFIN_NAND_BASE + NFCMMD_OFFSET) +#define NFADDR (ELFIN_NAND_BASE + NFADDR_OFFSET) +#define NFDATA (ELFIN_NAND_BASE + NFDATA_OFFSET) +#define NFMECCDATA0 (ELFIN_NAND_BASE + NFMECCDATA0_OFFSET) +#define NFMECCDATA1 (ELFIN_NAND_BASE + NFMECCDATA1_OFFSET) +#define NFSECCDATA0 (ELFIN_NAND_BASE + NFSECCDATA0_OFFSET) +#define NFSBLK (ELFIN_NAND_BASE + NFSBLK_OFFSET) +#define NFEBLK (ELFIN_NAND_BASE + NFEBLK_OFFSET) +#define NFSTAT (ELFIN_NAND_BASE + NFSTAT_OFFSET) +#define NFESTAT0 (ELFIN_NAND_BASE + NFESTAT0_OFFSET) +#define NFESTAT1 (ELFIN_NAND_BASE + NFESTAT1_OFFSET) +#define NFMECC0 (ELFIN_NAND_BASE + NFMECC0_OFFSET) +#define NFMECC1 (ELFIN_NAND_BASE + NFMECC1_OFFSET) +#define NFSECC (ELFIN_NAND_BASE + NFSECC_OFFSET) +#define NFMLCBITPT (ELFIN_NAND_BASE + NFMLCBITPT_OFFSET) + +#define NFCONF_REG __REG(ELFIN_NAND_BASE + NFCONF_OFFSET) +#define NFCONT_REG __REG(ELFIN_NAND_BASE + NFCONT_OFFSET) +#define NFCMD_REG __REG(ELFIN_NAND_BASE + NFCMMD_OFFSET) +#define NFADDR_REG __REG(ELFIN_NAND_BASE + NFADDR_OFFSET) +#define NFDATA_REG __REG(ELFIN_NAND_BASE + NFDATA_OFFSET) +#define NFDATA8_REG __REGb(ELFIN_NAND_BASE + NFDATA_OFFSET) +#define NFMECCDATA0_REG __REG(ELFIN_NAND_BASE + NFMECCDATA0_OFFSET) +#define NFMECCDATA1_REG __REG(ELFIN_NAND_BASE + NFMECCDATA1_OFFSET) +#define NFSECCDATA0_REG __REG(ELFIN_NAND_BASE + NFSECCDATA0_OFFSET) +#define NFSBLK_REG __REG(ELFIN_NAND_BASE + NFSBLK_OFFSET) +#define NFEBLK_REG __REG(ELFIN_NAND_BASE + NFEBLK_OFFSET) +#define NFSTAT_REG __REG(ELFIN_NAND_BASE + NFSTAT_OFFSET) +#define NFESTAT0_REG __REG(ELFIN_NAND_BASE + NFESTAT0_OFFSET) +#define NFESTAT1_REG __REG(ELFIN_NAND_BASE + NFESTAT1_OFFSET) +#define NFMECC0_REG __REG(ELFIN_NAND_BASE + NFMECC0_OFFSET) +#define NFMECC1_REG __REG(ELFIN_NAND_BASE + NFMECC1_OFFSET) +#define NFSECC_REG __REG(ELFIN_NAND_BASE + NFSECC_OFFSET) +#define NFMLCBITPT_REG __REG(ELFIN_NAND_BASE + NFMLCBITPT_OFFSET) + +#define NFCONF_ECC_4BIT (1<<24) + +#define NFCONT_ECC_ENC (1<<18) +#define NFCONT_WP (1<<16) +#define NFCONT_MECCLOCK (1<<7) +#define NFCONT_SECCLOCK (1<<6) +#define NFCONT_INITMECC (1<<5) +#define NFCONT_INITSECC (1<<4) +#define NFCONT_INITECC (NFCONT_INITMECC | NFCONT_INITSECC) +#define NFCONT_CS_ALT (1<<2) +#define NFCONT_CS (1<<1) +#define NFCONT_ENABLE (1<<0) + +#define NFSTAT_ECCENCDONE (1<<7) +#define NFSTAT_ECCDECDONE (1<<6) +#define NFSTAT_RnB (1<<0) + +#define NFESTAT0_ECCBUSY (1<<31) + +/* + * Interrupt + */ +#define ELFIN_VIC0_BASE_ADDR 0x71200000 +#define ELFIN_VIC1_BASE_ADDR 0x71300000 +#define oINTMOD 0x0C /* VIC INT SELECT (IRQ or FIQ) */ +#define oINTUNMSK 0x10 /* VIC INT EN (write 1 to unmask) */ +#define oINTMSK 0x14 /* VIC INT EN CLEAR (write 1 to mask) */ +#define oINTSUBMSK 0x1C /* VIC SOFT INT CLEAR */ +#define oVECTADDR 0xF00 /* VIC ADDRESS */ + +/* + * Watchdog timer + */ +#define ELFIN_WATCHDOG_BASE 0x7E004000 + +#define WTCON_REG __REG(0x7E004004) +#define WTDAT_REG __REG(0x7E004008) +#define WTCNT_REG __REG(0x7E00400C) + + +/* + * UART + */ +#define ELFIN_UART_BASE 0x7F005000 + +#define ELFIN_UART0_OFFSET 0x0000 +#define ELFIN_UART1_OFFSET 0x0400 +#define ELFIN_UART2_OFFSET 0x0800 + +#define ULCON_OFFSET 0x00 +#define UCON_OFFSET 0x04 +#define UFCON_OFFSET 0x08 +#define UMCON_OFFSET 0x0C +#define UTRSTAT_OFFSET 0x10 +#define UERSTAT_OFFSET 0x14 +#define UFSTAT_OFFSET 0x18 +#define UMSTAT_OFFSET 0x1C +#define UTXH_OFFSET 0x20 +#define URXH_OFFSET 0x24 +#define UBRDIV_OFFSET 0x28 +#define UDIVSLOT_OFFSET 0x2C +#define UINTP_OFFSET 0x30 +#define UINTSP_OFFSET 0x34 +#define UINTM_OFFSET 0x38 + +#define ULCON0_REG __REG(0x7F005000) +#define UCON0_REG __REG(0x7F005004) +#define UFCON0_REG __REG(0x7F005008) +#define UMCON0_REG __REG(0x7F00500C) +#define UTRSTAT0_REG __REG(0x7F005010) +#define UERSTAT0_REG __REG(0x7F005014) +#define UFSTAT0_REG __REG(0x7F005018) +#define UMSTAT0_REG __REG(0x7F00501c) +#define UTXH0_REG __REG(0x7F005020) +#define URXH0_REG __REG(0x7F005024) +#define UBRDIV0_REG __REG(0x7F005028) +#define UDIVSLOT0_REG __REG(0x7F00502c) +#define UINTP0_REG __REG(0x7F005030) +#define UINTSP0_REG __REG(0x7F005034) +#define UINTM0_REG __REG(0x7F005038) + +#define ULCON1_REG __REG(0x7F005400) +#define UCON1_REG __REG(0x7F005404) +#define UFCON1_REG __REG(0x7F005408) +#define UMCON1_REG __REG(0x7F00540C) +#define UTRSTAT1_REG __REG(0x7F005410) +#define UERSTAT1_REG __REG(0x7F005414) +#define UFSTAT1_REG __REG(0x7F005418) +#define UMSTAT1_REG __REG(0x7F00541c) +#define UTXH1_REG __REG(0x7F005420) +#define URXH1_REG __REG(0x7F005424) +#define UBRDIV1_REG __REG(0x7F005428) +#define UDIVSLOT1_REG __REG(0x7F00542c) +#define UINTP1_REG __REG(0x7F005430) +#define UINTSP1_REG __REG(0x7F005434) +#define UINTM1_REG __REG(0x7F005438) + +#define UTRSTAT_TX_EMPTY (1 << 2) +#define UTRSTAT_RX_READY (1 << 0) +#define UART_ERR_MASK 0xF + +/* + * PWM timer + */ +#define ELFIN_TIMER_BASE 0x7F006000 + +#define TCFG0_REG __REG(0x7F006000) +#define TCFG1_REG __REG(0x7F006004) +#define TCON_REG __REG(0x7F006008) +#define TCNTB0_REG __REG(0x7F00600c) +#define TCMPB0_REG __REG(0x7F006010) +#define TCNTO0_REG __REG(0x7F006014) +#define TCNTB1_REG __REG(0x7F006018) +#define TCMPB1_REG __REG(0x7F00601c) +#define TCNTO1_REG __REG(0x7F006020) +#define TCNTB2_REG __REG(0x7F006024) +#define TCMPB2_REG __REG(0x7F006028) +#define TCNTO2_REG __REG(0x7F00602c) +#define TCNTB3_REG __REG(0x7F006030) +#define TCMPB3_REG __REG(0x7F006034) +#define TCNTO3_REG __REG(0x7F006038) +#define TCNTB4_REG __REG(0x7F00603c) +#define TCNTO4_REG __REG(0x7F006040) + +/* Fields */ +#define fTCFG0_DZONE Fld(8, 16) /* the dead zone length (=timer 0) */ +#define fTCFG0_PRE1 Fld(8, 8) /* prescaler value for time 2,3,4 */ +#define fTCFG0_PRE0 Fld(8, 0) /* prescaler value for time 0,1 */ +#define fTCFG1_MUX4 Fld(4, 16) +/* bits */ +#define TCFG0_DZONE(x) FInsrt((x), fTCFG0_DZONE) +#define TCFG0_PRE1(x) FInsrt((x), fTCFG0_PRE1) +#define TCFG0_PRE0(x) FInsrt((x), fTCFG0_PRE0) +#define TCON_4_AUTO (1 << 22) /* auto reload on/off for Timer 4 */ +#define TCON_4_UPDATE (1 << 21) /* manual Update TCNTB4 */ +#define TCON_4_ONOFF (1 << 20) /* 0: Stop, 1: start Timer 4 */ +#define COUNT_4_ON (TCON_4_ONOFF * 1) +#define COUNT_4_OFF (TCON_4_ONOFF * 0) +#define TCON_3_AUTO (1 << 19) /* auto reload on/off for Timer 3 */ +#define TIMER3_ATLOAD_ON (TCON_3_AUTO * 1) +#define TIMER3_ATLAOD_OFF FClrBit(TCON, TCON_3_AUTO) +#define TCON_3_INVERT (1 << 18) /* 1: Inverter on for TOUT3 */ +#define TIMER3_IVT_ON (TCON_3_INVERT * 1) +#define TIMER3_IVT_OFF (FClrBit(TCON, TCON_3_INVERT)) +#define TCON_3_MAN (1 << 17) /* manual Update TCNTB3,TCMPB3 */ +#define TIMER3_MANUP (TCON_3_MAN*1) +#define TIMER3_NOP (FClrBit(TCON, TCON_3_MAN)) +#define TCON_3_ONOFF (1 << 16) /* 0: Stop, 1: start Timer 3 */ +#define TIMER3_ON (TCON_3_ONOFF * 1) +#define TIMER3_OFF (FClrBit(TCON, TCON_3_ONOFF)) + +#if defined(CONFIG_CLK_400_100_50) +#define STARTUP_AMDIV 400 +#define STARTUP_MDIV 400 +#define STARTUP_PDIV 6 +#define STARTUP_SDIV 1 +#elif defined(CONFIG_CLK_400_133_66) +#define STARTUP_AMDIV 400 +#define STARTUP_MDIV 533 +#define STARTUP_PDIV 6 +#define STARTUP_SDIV 1 +#elif defined(CONFIG_CLK_533_133_66) +#define STARTUP_AMDIV 533 +#define STARTUP_MDIV 533 +#define STARTUP_PDIV 6 +#define STARTUP_SDIV 1 +#elif defined(CONFIG_CLK_667_133_66) +#define STARTUP_AMDIV 667 +#define STARTUP_MDIV 533 +#define STARTUP_PDIV 6 +#define STARTUP_SDIV 1 +#endif + +#define STARTUP_PCLKDIV 3 +#define STARTUP_HCLKX2DIV 1 +#define STARTUP_HCLKDIV 1 +#define STARTUP_MPLLDIV 1 +#define STARTUP_APLLDIV 0 + +#define CLK_DIV_VAL ((STARTUP_PCLKDIV << 12) | (STARTUP_HCLKX2DIV << 9) | \ + (STARTUP_HCLKDIV << 8) | (STARTUP_MPLLDIV<<4) | STARTUP_APLLDIV) +#define MPLL_VAL ((1 << 31) | (STARTUP_MDIV << 16) | \ + (STARTUP_PDIV << 8) | STARTUP_SDIV) +#define STARTUP_MPLL (((CONFIG_SYS_CLK_FREQ >> STARTUP_SDIV) / \ + STARTUP_PDIV) * STARTUP_MDIV) + +#if defined(CONFIG_SYNC_MODE) +#define APLL_VAL ((1 << 31) | (STARTUP_MDIV << 16) | \ + (STARTUP_PDIV << 8) | STARTUP_SDIV) +#define STARTUP_APLL (((CONFIG_SYS_CLK_FREQ >> STARTUP_SDIV) / \ + STARTUP_PDIV) * STARTUP_MDIV) +#define STARTUP_HCLK (STARTUP_MPLL / (STARTUP_HCLKX2DIV + 1) / \ + (STARTUP_HCLKDIV + 1)) +#else +#define APLL_VAL ((1 << 31) | (STARTUP_AMDIV << 16) | \ + (STARTUP_PDIV << 8) | STARTUP_SDIV) +#define STARTUP_APLL (((CONFIG_SYS_CLK_FREQ >> STARTUP_SDIV) / \ + STARTUP_PDIV) * STARTUP_AMDIV) +#define STARTUP_HCLK (STARTUP_MPLL / (STARTUP_HCLKX2DIV + 1) / \ + (STARTUP_HCLKDIV + 1)) +#endif + + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define DMC1_MEM_CFG 0x80010012 /* Chip1, Burst4, Row/Column bit */ +#define DMC1_MEM_CFG2 0xB45 +#define DMC1_CHIP0_CFG 0x150F8 /* 0x4000_0000 ~ 0x43ff_ffff (64MB) */ +#define DMC_DDR_32_CFG 0x0 /* 32bit, DDR */ + +/* Memory Parameters */ +/* DDR Parameters */ +#define DDR_tREFRESH 7800 /* ns */ +#define DDR_tRAS 45 /* ns (min: 45ns)*/ +#define DDR_tRC 68 /* ns (min: 67.5ns)*/ +#define DDR_tRCD 23 /* ns (min: 22.5ns)*/ +#define DDR_tRFC 80 /* ns (min: 80ns)*/ +#define DDR_tRP 23 /* ns (min: 22.5ns)*/ +#define DDR_tRRD 15 /* ns (min: 15ns)*/ +#define DDR_tWR 15 /* ns (min: 15ns)*/ +#define DDR_tXSR 120 /* ns (min: 120ns)*/ +#define DDR_CASL 3 /* CAS Latency 3 */ + +/* + * mDDR memory configuration + */ + +#define NS_TO_CLK(t) ((STARTUP_HCLK / 1000 * (t) - 1) / 1000000) + +#define DMC_DDR_BA_EMRS 2 +#define DMC_DDR_MEM_CASLAT 3 +/* 6 Set Cas Latency to 3 */ +#define DMC_DDR_CAS_LATENCY (DDR_CASL << 1) +/* Min 0.75 ~ 1.25 */ +#define DMC_DDR_t_DQSS 1 +/* Min 2 tck */ +#define DMC_DDR_t_MRD 2 +/* 7, Min 45ns */ +#define DMC_DDR_t_RAS (NS_TO_CLK(DDR_tRAS) + 1) +/* 10, Min 67.5ns */ +#define DMC_DDR_t_RC (NS_TO_CLK(DDR_tRC) + 1) +/* 4,5(TRM), Min 22.5ns */ +#define DMC_DDR_t_RCD (NS_TO_CLK(DDR_tRCD) + 1) +#define DMC_DDR_schedule_RCD ((DMC_DDR_t_RCD - 3) << 3) +/* 11,18(TRM) Min 80ns */ +#define DMC_DDR_t_RFC (NS_TO_CLK(DDR_tRFC) + 1) +#define DMC_DDR_schedule_RFC ((DMC_DDR_t_RFC - 3) << 5) +/* 4, 5(TRM) Min 22.5ns */ +#define DMC_DDR_t_RP (NS_TO_CLK(DDR_tRP) + 1) +#define DMC_DDR_schedule_RP ((DMC_DDR_t_RP - 3) << 3) +/* 3, Min 15ns */ +#define DMC_DDR_t_RRD (NS_TO_CLK(DDR_tRRD) + 1) +/* Min 15ns */ +#define DMC_DDR_t_WR (NS_TO_CLK(DDR_tWR) + 1) +#define DMC_DDR_t_WTR 2 +/* 1tck + tIS(1.5ns) */ +#define DMC_DDR_t_XP 2 +/* 17, Min 120ns */ +#define DMC_DDR_t_XSR (NS_TO_CLK(DDR_tXSR) + 1) +#define DMC_DDR_t_ESR DMC_DDR_t_XSR +/* TRM 2656 */ +#define DMC_DDR_REFRESH_PRD (NS_TO_CLK(DDR_tREFRESH)) +/* 2b01 : mDDR */ +#define DMC_DDR_USER_CONFIG 1 + +#ifndef __ASSEMBLY__ +enum s3c64xx_uarts_nr { + S3C64XX_UART0, + S3C64XX_UART1, + S3C64XX_UART2, +}; + +#include "s3c64x0.h" + +static inline s3c64xx_uart *s3c64xx_get_base_uart(enum s3c64xx_uarts_nr nr) +{ + return (s3c64xx_uart *)(ELFIN_UART_BASE + (nr * 0x400)); +} +#endif + +#endif /*__S3C6400_H__*/ diff --git a/include/asm-arm/arch-s3c64xx/s3c64x0.h b/include/asm-arm/arch-s3c64xx/s3c64x0.h new file mode 100644 index 000000000..0bbf1d0c4 --- /dev/null +++ b/include/asm-arm/arch-s3c64xx/s3c64x0.h @@ -0,0 +1,90 @@ +/* + * (C) Copyright 2003 + * David MÃŒller ELSOFT AG Switzerland. d.mueller@elsoft.ch + * + * (C) Copyright 2008 + * Guennadi Liakhovetki, DENX Software Engineering, + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/************************************************ + * NAME : S3C64XX.h + * Version : 31.3.2003 + * + * common stuff for SAMSUNG S3C64XX SoC + ************************************************/ + +#ifndef __S3C64XX_H__ +#define __S3C64XX_H__ + +#if defined(CONFIG_SYNC_MODE) && defined(CONFIG_S3C6400) +#error CONFIG_SYNC_MODE unavailable on S3C6400, please, fix your configuration! +#endif + +#include + +/* UART (see manual chapter 11) */ +typedef struct { + volatile u32 ULCON; + volatile u32 UCON; + volatile u32 UFCON; + volatile u32 UMCON; + volatile u32 UTRSTAT; + volatile u32 UERSTAT; + volatile u32 UFSTAT; + volatile u32 UMSTAT; +#ifdef __BIG_ENDIAN + volatile u8 res1[3]; + volatile u8 UTXH; + volatile u8 res2[3]; + volatile u8 URXH; +#else /* Little Endian */ + volatile u8 UTXH; + volatile u8 res1[3]; + volatile u8 URXH; + volatile u8 res2[3]; +#endif + volatile u32 UBRDIV; +#ifdef __BIG_ENDIAN + volatile u8 res3[2]; + volatile u16 UDIVSLOT; +#else + volatile u16 UDIVSLOT; + volatile u8 res3[2]; +#endif +} s3c64xx_uart; + +/* PWM TIMER (see manual chapter 10) */ +typedef struct { + volatile u32 TCNTB; + volatile u32 TCMPB; + volatile u32 TCNTO; +} s3c64xx_timer; + +typedef struct { + volatile u32 TCFG0; + volatile u32 TCFG1; + volatile u32 TCON; + s3c64xx_timer ch[4]; + volatile u32 TCNTB4; + volatile u32 TCNTO4; +} s3c64xx_timers; + +#endif /*__S3C64XX_H__*/ diff --git a/include/s3c6400.h b/include/s3c6400.h deleted file mode 100644 index e527c08b1..000000000 --- a/include/s3c6400.h +++ /dev/null @@ -1,895 +0,0 @@ -/* - * (C) Copyright 2007 - * Byungjae Lee, Samsung Erectronics, bjlee@samsung.com. - * - only support for S3C6400 - * - * (C) Copyright 2008 - * Guennadi Liakhovetki, DENX Software Engineering, - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/************************************************ - * NAME : s3c6400.h - * - * Based on S3C6400 User's manual Rev 0.0 - ************************************************/ - -#ifndef __S3C6400_H__ -#define __S3C6400_H__ - -#define S3C64XX_UART_CHANNELS 3 -#define S3C64XX_SPI_CHANNELS 2 - -#include - -#define ELFIN_CLOCK_POWER_BASE 0x7e00f000 - -/* Clock & Power Controller for mDirac3*/ -#define APLL_LOCK_OFFSET 0x00 -#define MPLL_LOCK_OFFSET 0x04 -#define EPLL_LOCK_OFFSET 0x08 -#define APLL_CON_OFFSET 0x0C -#define MPLL_CON_OFFSET 0x10 -#define EPLL_CON0_OFFSET 0x14 -#define EPLL_CON1_OFFSET 0x18 -#define CLK_SRC_OFFSET 0x1C -#define CLK_DIV0_OFFSET 0x20 -#define CLK_DIV1_OFFSET 0x24 -#define CLK_DIV2_OFFSET 0x28 -#define CLK_OUT_OFFSET 0x2C -#define HCLK_GATE_OFFSET 0x30 -#define PCLK_GATE_OFFSET 0x34 -#define SCLK_GATE_OFFSET 0x38 -#define AHB_CON0_OFFSET 0x100 -#define AHB_CON1_OFFSET 0x104 -#define AHB_CON2_OFFSET 0x108 -#define SELECT_DMA_OFFSET 0x110 -#define SW_RST_OFFSET 0x114 -#define SYS_ID_OFFSET 0x118 -#define MEM_SYS_CFG_OFFSET 0x120 -#define QOS_OVERRIDE0_OFFSET 0x124 -#define QOS_OVERRIDE1_OFFSET 0x128 -#define MEM_CFG_STAT_OFFSET 0x12C -#define PWR_CFG_OFFSET 0x804 -#define EINT_MASK_OFFSET 0x808 -#define NOR_CFG_OFFSET 0x810 -#define STOP_CFG_OFFSET 0x814 -#define SLEEP_CFG_OFFSET 0x818 -#define OSC_FREQ_OFFSET 0x820 -#define OSC_STABLE_OFFSET 0x824 -#define PWR_STABLE_OFFSET 0x828 -#define FPC_STABLE_OFFSET 0x82C -#define MTC_STABLE_OFFSET 0x830 -#define OTHERS_OFFSET 0x900 -#define RST_STAT_OFFSET 0x904 -#define WAKEUP_STAT_OFFSET 0x908 -#define BLK_PWR_STAT_OFFSET 0x90C -#define INF_REG0_OFFSET 0xA00 -#define INF_REG1_OFFSET 0xA04 -#define INF_REG2_OFFSET 0xA08 -#define INF_REG3_OFFSET 0xA0C -#define INF_REG4_OFFSET 0xA10 -#define INF_REG5_OFFSET 0xA14 -#define INF_REG6_OFFSET 0xA18 -#define INF_REG7_OFFSET 0xA1C - -#define OSC_CNT_VAL_OFFSET 0x824 -#define PWR_CNT_VAL_OFFSET 0x828 -#define FPC_CNT_VAL_OFFSET 0x82C -#define MTC_CNT_VAL_OFFSET 0x830 - -#define APLL_LOCK_REG __REG(ELFIN_CLOCK_POWER_BASE + APLL_LOCK_OFFSET) -#define MPLL_LOCK_REG __REG(ELFIN_CLOCK_POWER_BASE + MPLL_LOCK_OFFSET) -#define EPLL_LOCK_REG __REG(ELFIN_CLOCK_POWER_BASE + EPLL_LOCK_OFFSET) -#define APLL_CON_REG __REG(ELFIN_CLOCK_POWER_BASE + APLL_CON_OFFSET) -#define MPLL_CON_REG __REG(ELFIN_CLOCK_POWER_BASE + MPLL_CON_OFFSET) -#define EPLL_CON0_REG __REG(ELFIN_CLOCK_POWER_BASE + EPLL_CON0_OFFSET) -#define EPLL_CON1_REG __REG(ELFIN_CLOCK_POWER_BASE + EPLL_CON1_OFFSET) -#define CLK_SRC_REG __REG(ELFIN_CLOCK_POWER_BASE + CLK_SRC_OFFSET) -#define CLK_DIV0_REG __REG(ELFIN_CLOCK_POWER_BASE + CLK_DIV0_OFFSET) -#define CLK_DIV1_REG __REG(ELFIN_CLOCK_POWER_BASE + CLK_DIV1_OFFSET) -#define CLK_DIV2_REG __REG(ELFIN_CLOCK_POWER_BASE + CLK_DIV2_OFFSET) -#define CLK_OUT_REG __REG(ELFIN_CLOCK_POWER_BASE + CLK_OUT_OFFSET) -#define HCLK_GATE_REG __REG(ELFIN_CLOCK_POWER_BASE + HCLK_GATE_OFFSET) -#define PCLK_GATE_REG __REG(ELFIN_CLOCK_POWER_BASE + PCLK_GATE_OFFSET) -#define SCLK_GATE_REG __REG(ELFIN_CLOCK_POWER_BASE + SCLK_GATE_OFFSET) -#define AHB_CON0_REG __REG(ELFIN_CLOCK_POWER_BASE + AHB_CON0_OFFSET) -#define AHB_CON1_REG __REG(ELFIN_CLOCK_POWER_BASE + AHB_CON1_OFFSET) -#define AHB_CON2_REG __REG(ELFIN_CLOCK_POWER_BASE + AHB_CON2_OFFSET) -#define SELECT_DMA_REG __REG(ELFIN_CLOCK_POWER_BASE + \ - SELECT_DMA_OFFSET) -#define SW_RST_REG __REG(ELFIN_CLOCK_POWER_BASE + SW_RST_OFFSET) -#define SYS_ID_REG __REG(ELFIN_CLOCK_POWER_BASE + SYS_ID_OFFSET) -#define MEM_SYS_CFG_REG __REG(ELFIN_CLOCK_POWER_BASE + \ - MEM_SYS_CFG_OFFSET) -#define QOS_OVERRIDE0_REG __REG(ELFIN_CLOCK_POWER_BASE + \ - QOS_OVERRIDE0_OFFSET) -#define QOS_OVERRIDE1_REG __REG(ELFIN_CLOCK_POWER_BASE + \ - QOS_OVERRIDE1_OFFSET) -#define MEM_CFG_STAT_REG __REG(ELFIN_CLOCK_POWER_BASE + \ - MEM_CFG_STAT_OFFSET) -#define PWR_CFG_REG __REG(ELFIN_CLOCK_POWER_BASE + PWR_CFG_OFFSET) -#define EINT_MASK_REG __REG(ELFIN_CLOCK_POWER_BASE + EINT_MASK_OFFSET) -#define NOR_CFG_REG __REG(ELFIN_CLOCK_POWER_BASE + NOR_CFG_OFFSET) -#define STOP_CFG_REG __REG(ELFIN_CLOCK_POWER_BASE + STOP_CFG_OFFSET) -#define SLEEP_CFG_REG __REG(ELFIN_CLOCK_POWER_BASE + SLEEP_CFG_OFFSET) -#define OSC_FREQ_REG __REG(ELFIN_CLOCK_POWER_BASE + OSC_FREQ_OFFSET) -#define OSC_CNT_VAL_REG __REG(ELFIN_CLOCK_POWER_BASE + \ - OSC_CNT_VAL_OFFSET) -#define PWR_CNT_VAL_REG __REG(ELFIN_CLOCK_POWER_BASE + \ - PWR_CNT_VAL_OFFSET) -#define FPC_CNT_VAL_REG __REG(ELFIN_CLOCK_POWER_BASE + \ - FPC_CNT_VAL_OFFSET) -#define MTC_CNT_VAL_REG __REG(ELFIN_CLOCK_POWER_BASE + \ - MTC_CNT_VAL_OFFSET) -#define OTHERS_REG __REG(ELFIN_CLOCK_POWER_BASE + OTHERS_OFFSET) -#define RST_STAT_REG __REG(ELFIN_CLOCK_POWER_BASE + RST_STAT_OFFSET) -#define WAKEUP_STAT_REG __REG(ELFIN_CLOCK_POWER_BASE + \ - WAKEUP_STAT_OFFSET) -#define BLK_PWR_STAT_REG __REG(ELFIN_CLOCK_POWER_BASE + \ - BLK_PWR_STAT_OFFSET) -#define INF_REG0_REG __REG(ELFIN_CLOCK_POWER_BASE + INF_REG0_OFFSET) -#define INF_REG1_REG __REG(ELFIN_CLOCK_POWER_BASE + INF_REG1_OFFSET) -#define INF_REG2_REG __REG(ELFIN_CLOCK_POWER_BASE + INF_REG2_OFFSET) -#define INF_REG3_REG __REG(ELFIN_CLOCK_POWER_BASE + INF_REG3_OFFSET) -#define INF_REG4_REG __REG(ELFIN_CLOCK_POWER_BASE + INF_REG4_OFFSET) -#define INF_REG5_REG __REG(ELFIN_CLOCK_POWER_BASE + INF_REG5_OFFSET) -#define INF_REG6_REG __REG(ELFIN_CLOCK_POWER_BASE + INF_REG6_OFFSET) -#define INF_REG7_REG __REG(ELFIN_CLOCK_POWER_BASE + INF_REG7_OFFSET) - -#define APLL_LOCK (ELFIN_CLOCK_POWER_BASE + APLL_LOCK_OFFSET) -#define MPLL_LOCK (ELFIN_CLOCK_POWER_BASE + MPLL_LOCK_OFFSET) -#define EPLL_LOCK (ELFIN_CLOCK_POWER_BASE + EPLL_LOCK_OFFSET) -#define APLL_CON (ELFIN_CLOCK_POWER_BASE + APLL_CON_OFFSET) -#define MPLL_CON (ELFIN_CLOCK_POWER_BASE + MPLL_CON_OFFSET) -#define EPLL_CON0 (ELFIN_CLOCK_POWER_BASE + EPLL_CON0_OFFSET) -#define EPLL_CON1 (ELFIN_CLOCK_POWER_BASE + EPLL_CON1_OFFSET) -#define CLK_SRC (ELFIN_CLOCK_POWER_BASE + CLK_SRC_OFFSET) -#define CLK_DIV0 (ELFIN_CLOCK_POWER_BASE + CLK_DIV0_OFFSET) -#define CLK_DIV1 (ELFIN_CLOCK_POWER_BASE + CLK_DIV1_OFFSET) -#define CLK_DIV2 (ELFIN_CLOCK_POWER_BASE + CLK_DIV2_OFFSET) -#define CLK_OUT (ELFIN_CLOCK_POWER_BASE + CLK_OUT_OFFSET) -#define HCLK_GATE (ELFIN_CLOCK_POWER_BASE + HCLK_GATE_OFFSET) -#define PCLK_GATE (ELFIN_CLOCK_POWER_BASE + PCLK_GATE_OFFSET) -#define SCLK_GATE (ELFIN_CLOCK_POWER_BASE + SCLK_GATE_OFFSET) -#define AHB_CON0 (ELFIN_CLOCK_POWER_BASE + AHB_CON0_OFFSET) -#define AHB_CON1 (ELFIN_CLOCK_POWER_BASE + AHB_CON1_OFFSET) -#define AHB_CON2 (ELFIN_CLOCK_POWER_BASE + AHB_CON2_OFFSET) -#define SELECT_DMA (ELFIN_CLOCK_POWER_BASE + SELECT_DMA_OFFSET) -#define SW_RST (ELFIN_CLOCK_POWER_BASE + SW_RST_OFFSET) -#define SYS_ID (ELFIN_CLOCK_POWER_BASE + SYS_ID_OFFSET) -#define MEM_SYS_CFG (ELFIN_CLOCK_POWER_BASE + MEM_SYS_CFG_OFFSET) -#define QOS_OVERRIDE0 (ELFIN_CLOCK_POWER_BASE + QOS_OVERRIDE0_OFFSET) -#define QOS_OVERRIDE1 (ELFIN_CLOCK_POWER_BASE + QOS_OVERRIDE1_OFFSET) -#define MEM_CFG_STAT (ELFIN_CLOCK_POWER_BASE + MEM_CFG_STAT_OFFSET) -#define PWR_CFG (ELFIN_CLOCK_POWER_BASE + PWR_CFG_OFFSET) -#define EINT_MASK (ELFIN_CLOCK_POWER_BASE + EINT_MASK_OFFSET) -#define NOR_CFG (ELFIN_CLOCK_POWER_BASE + NOR_CFG_OFFSET) -#define STOP_CFG (ELFIN_CLOCK_POWER_BASE + STOP_CFG_OFFSET) -#define SLEEP_CFG (ELFIN_CLOCK_POWER_BASE + SLEEP_CFG_OFFSET) -#define OSC_FREQ (ELFIN_CLOCK_POWER_BASE + OSC_FREQ_OFFSET) -#define OSC_CNT_VAL (ELFIN_CLOCK_POWER_BASE + OSC_CNT_VAL_OFFSET) -#define PWR_CNT_VAL (ELFIN_CLOCK_POWER_BASE + PWR_CNT_VAL_OFFSET) -#define FPC_CNT_VAL (ELFIN_CLOCK_POWER_BASE + FPC_CNT_VAL_OFFSET) -#define MTC_CNT_VAL (ELFIN_CLOCK_POWER_BASE + MTC_CNT_VAL_OFFSET) -#define OTHERS (ELFIN_CLOCK_POWER_BASE + OTHERS_OFFSET) -#define RST_STAT (ELFIN_CLOCK_POWER_BASE + RST_STAT_OFFSET) -#define WAKEUP_STAT (ELFIN_CLOCK_POWER_BASE + WAKEUP_STAT_OFFSET) -#define BLK_PWR_STAT (ELFIN_CLOCK_POWER_BASE + BLK_PWR_STAT_OFFSET) -#define INF_REG0 (ELFIN_CLOCK_POWER_BASE + INF_REG0_OFFSET) -#define INF_REG1 (ELFIN_CLOCK_POWER_BASE + INF_REG1_OFFSET) -#define INF_REG2 (ELFIN_CLOCK_POWER_BASE + INF_REG2_OFFSET) -#define INF_REG3 (ELFIN_CLOCK_POWER_BASE + INF_REG3_OFFSET) -#define INF_REG4 (ELFIN_CLOCK_POWER_BASE + INF_REG4_OFFSET) -#define INF_REG5 (ELFIN_CLOCK_POWER_BASE + INF_REG5_OFFSET) -#define INF_REG6 (ELFIN_CLOCK_POWER_BASE + INF_REG6_OFFSET) -#define INF_REG7 (ELFIN_CLOCK_POWER_BASE + INF_REG7_OFFSET) - - -/* - * GPIO - */ -#define ELFIN_GPIO_BASE 0x7f008000 - -#define GPACON_OFFSET 0x00 -#define GPADAT_OFFSET 0x04 -#define GPAPUD_OFFSET 0x08 -#define GPACONSLP_OFFSET 0x0C -#define GPAPUDSLP_OFFSET 0x10 -#define GPBCON_OFFSET 0x20 -#define GPBDAT_OFFSET 0x24 -#define GPBPUD_OFFSET 0x28 -#define GPBCONSLP_OFFSET 0x2C -#define GPBPUDSLP_OFFSET 0x30 -#define GPCCON_OFFSET 0x40 -#define GPCDAT_OFFSET 0x44 -#define GPCPUD_OFFSET 0x48 -#define GPCCONSLP_OFFSET 0x4C -#define GPCPUDSLP_OFFSET 0x50 -#define GPDCON_OFFSET 0x60 -#define GPDDAT_OFFSET 0x64 -#define GPDPUD_OFFSET 0x68 -#define GPDCONSLP_OFFSET 0x6C -#define GPDPUDSLP_OFFSET 0x70 -#define GPECON_OFFSET 0x80 -#define GPEDAT_OFFSET 0x84 -#define GPEPUD_OFFSET 0x88 -#define GPECONSLP_OFFSET 0x8C -#define GPEPUDSLP_OFFSET 0x90 -#define GPFCON_OFFSET 0xA0 -#define GPFDAT_OFFSET 0xA4 -#define GPFPUD_OFFSET 0xA8 -#define GPFCONSLP_OFFSET 0xAC -#define GPFPUDSLP_OFFSET 0xB0 -#define GPGCON_OFFSET 0xC0 -#define GPGDAT_OFFSET 0xC4 -#define GPGPUD_OFFSET 0xC8 -#define GPGCONSLP_OFFSET 0xCC -#define GPGPUDSLP_OFFSET 0xD0 -#define GPHCON0_OFFSET 0xE0 -#define GPHCON1_OFFSET 0xE4 -#define GPHDAT_OFFSET 0xE8 -#define GPHPUD_OFFSET 0xEC -#define GPHCONSLP_OFFSET 0xF0 -#define GPHPUDSLP_OFFSET 0xF4 -#define GPICON_OFFSET 0x100 -#define GPIDAT_OFFSET 0x104 -#define GPIPUD_OFFSET 0x108 -#define GPICONSLP_OFFSET 0x10C -#define GPIPUDSLP_OFFSET 0x110 -#define GPJCON_OFFSET 0x120 -#define GPJDAT_OFFSET 0x124 -#define GPJPUD_OFFSET 0x128 -#define GPJCONSLP_OFFSET 0x12C -#define GPJPUDSLP_OFFSET 0x130 -#define MEM0DRVCON_OFFSET 0x1D0 -#define MEM1DRVCON_OFFSET 0x1D4 -#define GPKCON0_OFFSET 0x800 -#define GPKCON1_OFFSET 0x804 -#define GPKDAT_OFFSET 0x808 -#define GPKPUD_OFFSET 0x80C -#define GPLCON0_OFFSET 0x810 -#define GPLCON1_OFFSET 0x814 -#define GPLDAT_OFFSET 0x818 -#define GPLPUD_OFFSET 0x81C -#define GPMCON_OFFSET 0x820 -#define GPMDAT_OFFSET 0x824 -#define GPMPUD_OFFSET 0x828 -#define GPNCON_OFFSET 0x830 -#define GPNDAT_OFFSET 0x834 -#define GPNPUD_OFFSET 0x838 -#define GPOCON_OFFSET 0x140 -#define GPODAT_OFFSET 0x144 -#define GPOPUD_OFFSET 0x148 -#define GPOCONSLP_OFFSET 0x14C -#define GPOPUDSLP_OFFSET 0x150 -#define GPPCON_OFFSET 0x160 -#define GPPDAT_OFFSET 0x164 -#define GPPPUD_OFFSET 0x168 -#define GPPCONSLP_OFFSET 0x16C -#define GPPPUDSLP_OFFSET 0x170 -#define GPQCON_OFFSET 0x180 -#define GPQDAT_OFFSET 0x184 -#define GPQPUD_OFFSET 0x188 -#define GPQCONSLP_OFFSET 0x18C -#define GPQPUDSLP_OFFSET 0x190 - -#define EINTPEND_OFFSET 0x924 - -#define GPACON_REG __REG(ELFIN_GPIO_BASE + GPACON_OFFSET) -#define GPADAT_REG __REG(ELFIN_GPIO_BASE + GPADAT_OFFSET) -#define GPAPUD_REG __REG(ELFIN_GPIO_BASE + GPAPUD_OFFSET) -#define GPACONSLP_REG __REG(ELFIN_GPIO_BASE + GPACONSLP_OFFSET) -#define GPAPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPAPUDSLP_OFFSET) -#define GPBCON_REG __REG(ELFIN_GPIO_BASE + GPBCON_OFFSET) -#define GPBDAT_REG __REG(ELFIN_GPIO_BASE + GPBDAT_OFFSET) -#define GPBPUD_REG __REG(ELFIN_GPIO_BASE + GPBPUD_OFFSET) -#define GPBCONSLP_REG __REG(ELFIN_GPIO_BASE + GPBCONSLP_OFFSET) -#define GPBPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPBPUDSLP_OFFSET) -#define GPCCON_REG __REG(ELFIN_GPIO_BASE + GPCCON_OFFSET) -#define GPCDAT_REG __REG(ELFIN_GPIO_BASE + GPCDAT_OFFSET) -#define GPCPUD_REG __REG(ELFIN_GPIO_BASE + GPCPUD_OFFSET) -#define GPCCONSLP_REG __REG(ELFIN_GPIO_BASE + GPCCONSLP_OFFSET) -#define GPCPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPCPUDSLP_OFFSET) -#define GPDCON_REG __REG(ELFIN_GPIO_BASE + GPDCON_OFFSET) -#define GPDDAT_REG __REG(ELFIN_GPIO_BASE + GPDDAT_OFFSET) -#define GPDPUD_REG __REG(ELFIN_GPIO_BASE + GPDPUD_OFFSET) -#define GPDCONSLP_REG __REG(ELFIN_GPIO_BASE + GPDCONSLP_OFFSET) -#define GPDPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPDPUDSLP_OFFSET) -#define GPECON_REG __REG(ELFIN_GPIO_BASE + GPECON_OFFSET) -#define GPEDAT_REG __REG(ELFIN_GPIO_BASE + GPEDAT_OFFSET) -#define GPEPUD_REG __REG(ELFIN_GPIO_BASE + GPEPUD_OFFSET) -#define GPECONSLP_REG __REG(ELFIN_GPIO_BASE + GPECONSLP_OFFSET) -#define GPEPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPEPUDSLP_OFFSET) -#define GPFCON_REG __REG(ELFIN_GPIO_BASE + GPFCON_OFFSET) -#define GPFDAT_REG __REG(ELFIN_GPIO_BASE + GPFDAT_OFFSET) -#define GPFPUD_REG __REG(ELFIN_GPIO_BASE + GPFPUD_OFFSET) -#define GPFCONSLP_REG __REG(ELFIN_GPIO_BASE + GPFCONSLP_OFFSET) -#define GPFPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPFPUDSLP_OFFSET) -#define GPGCON_REG __REG(ELFIN_GPIO_BASE + GPGCON_OFFSET) -#define GPGDAT_REG __REG(ELFIN_GPIO_BASE + GPGDAT_OFFSET) -#define GPGPUD_REG __REG(ELFIN_GPIO_BASE + GPGPUD_OFFSET) -#define GPGCONSLP_REG __REG(ELFIN_GPIO_BASE + GPGCONSLP_OFFSET) -#define GPGPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPGPUDSLP_OFFSET) -#define GPHCON0_REG __REG(ELFIN_GPIO_BASE + GPHCON0_OFFSET) -#define GPHCON1_REG __REG(ELFIN_GPIO_BASE + GPHCON1_OFFSET) -#define GPHDAT_REG __REG(ELFIN_GPIO_BASE + GPHDAT_OFFSET) -#define GPHPUD_REG __REG(ELFIN_GPIO_BASE + GPHPUD_OFFSET) -#define GPHCONSLP_REG __REG(ELFIN_GPIO_BASE + GPHCONSLP_OFFSET) -#define GPHPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPHPUDSLP_OFFSET) -#define GPICON_REG __REG(ELFIN_GPIO_BASE + GPICON_OFFSET) -#define GPIDAT_REG __REG(ELFIN_GPIO_BASE + GPIDAT_OFFSET) -#define GPIPUD_REG __REG(ELFIN_GPIO_BASE + GPIPUD_OFFSET) -#define GPICONSLP_REG __REG(ELFIN_GPIO_BASE + GPICONSLP_OFFSET) -#define GPIPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPIPUDSLP_OFFSET) -#define GPJCON_REG __REG(ELFIN_GPIO_BASE + GPJCON_OFFSET) -#define GPJDAT_REG __REG(ELFIN_GPIO_BASE + GPJDAT_OFFSET) -#define GPJPUD_REG __REG(ELFIN_GPIO_BASE + GPJPUD_OFFSET) -#define GPJCONSLP_REG __REG(ELFIN_GPIO_BASE + GPJCONSLP_OFFSET) -#define GPJPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPJPUDSLP_OFFSET) -#define GPKCON0_REG __REG(ELFIN_GPIO_BASE + GPKCON0_OFFSET) -#define GPKCON1_REG __REG(ELFIN_GPIO_BASE + GPKCON1_OFFSET) -#define GPKDAT_REG __REG(ELFIN_GPIO_BASE + GPKDAT_OFFSET) -#define GPKPUD_REG __REG(ELFIN_GPIO_BASE + GPKPUD_OFFSET) -#define GPLCON0_REG __REG(ELFIN_GPIO_BASE + GPLCON0_OFFSET) -#define GPLCON1_REG __REG(ELFIN_GPIO_BASE + GPLCON1_OFFSET) -#define GPLDAT_REG __REG(ELFIN_GPIO_BASE + GPLDAT_OFFSET) -#define GPLPUD_REG __REG(ELFIN_GPIO_BASE + GPLPUD_OFFSET) -#define GPMCON_REG __REG(ELFIN_GPIO_BASE + GPMCON_OFFSET) -#define GPMDAT_REG __REG(ELFIN_GPIO_BASE + GPMDAT_OFFSET) -#define GPMPUD_REG __REG(ELFIN_GPIO_BASE + GPMPUD_OFFSET) -#define GPNCON_REG __REG(ELFIN_GPIO_BASE + GPNCON_OFFSET) -#define GPNDAT_REG __REG(ELFIN_GPIO_BASE + GPNDAT_OFFSET) -#define GPNPUD_REG __REG(ELFIN_GPIO_BASE + GPNPUD_OFFSET) -#define GPOCON_REG __REG(ELFIN_GPIO_BASE + GPOCON_OFFSET) -#define GPODAT_REG __REG(ELFIN_GPIO_BASE + GPODAT_OFFSET) -#define GPOPUD_REG __REG(ELFIN_GPIO_BASE + GPOPUD_OFFSET) -#define GPOCONSLP_REG __REG(ELFIN_GPIO_BASE + GPOCONSLP_OFFSET) -#define GPOPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPOPUDSLP_OFFSET) -#define GPPCON_REG __REG(ELFIN_GPIO_BASE + GPPCON_OFFSET) -#define GPPDAT_REG __REG(ELFIN_GPIO_BASE + GPPDAT_OFFSET) -#define GPPPUD_REG __REG(ELFIN_GPIO_BASE + GPPPUD_OFFSET) -#define GPPCONSLP_REG __REG(ELFIN_GPIO_BASE + GPPCONSLP_OFFSET) -#define GPPPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPPPUDSLP_OFFSET) -#define GPQCON_REG __REG(ELFIN_GPIO_BASE + GPQCON_OFFSET) -#define GPQDAT_REG __REG(ELFIN_GPIO_BASE + GPQDAT_OFFSET) -#define GPQPUD_REG __REG(ELFIN_GPIO_BASE + GPQPUD_OFFSET) -#define GPQCONSLP_REG __REG(ELFIN_GPIO_BASE + GPQCONSLP_OFFSET) -#define GPQPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPQPUDSLP_OFFSET) - -/* - * Bus Matrix - */ -#define ELFIN_MEM_SYS_CFG 0x7e00f120 - -#define S3C64XX_MEM_SYS_CFG_16BIT (1 << 12) - -#define S3C64XX_MEM_SYS_CFG_NAND 0x0008 -#define S3C64XX_MEM_SYS_CFG_ONENAND S3C64XX_MEM_SYS_CFG_16BIT - -#define GPACON (ELFIN_GPIO_BASE + GPACON_OFFSET) -#define GPADAT (ELFIN_GPIO_BASE + GPADAT_OFFSET) -#define GPAPUD (ELFIN_GPIO_BASE + GPAPUD_OFFSET) -#define GPACONSLP (ELFIN_GPIO_BASE + GPACONSLP_OFFSET) -#define GPAPUDSLP (ELFIN_GPIO_BASE + GPAPUDSLP_OFFSET) -#define GPBCON (ELFIN_GPIO_BASE + GPBCON_OFFSET) -#define GPBDAT (ELFIN_GPIO_BASE + GPBDAT_OFFSET) -#define GPBPUD (ELFIN_GPIO_BASE + GPBPUD_OFFSET) -#define GPBCONSLP (ELFIN_GPIO_BASE + GPBCONSLP_OFFSET) -#define GPBPUDSLP (ELFIN_GPIO_BASE + GPBPUDSLP_OFFSET) -#define GPCCON (ELFIN_GPIO_BASE + GPCCON_OFFSET) -#define GPCDAT (ELFIN_GPIO_BASE + GPCDAT_OFFSET) -#define GPCPUD (ELFIN_GPIO_BASE + GPCPUD_OFFSET) -#define GPCCONSLP (ELFIN_GPIO_BASE + GPCCONSLP_OFFSET) -#define GPCPUDSLP (ELFIN_GPIO_BASE + GPCPUDSLP_OFFSET) -#define GPDCON (ELFIN_GPIO_BASE + GPDCON_OFFSET) -#define GPDDAT (ELFIN_GPIO_BASE + GPDDAT_OFFSET) -#define GPDPUD (ELFIN_GPIO_BASE + GPDPUD_OFFSET) -#define GPDCONSLP (ELFIN_GPIO_BASE + GPDCONSLP_OFFSET) -#define GPDPUDSLP (ELFIN_GPIO_BASE + GPDPUDSLP_OFFSET) -#define GPECON (ELFIN_GPIO_BASE + GPECON_OFFSET) -#define GPEDAT (ELFIN_GPIO_BASE + GPEDAT_OFFSET) -#define GPEPUD (ELFIN_GPIO_BASE + GPEPUD_OFFSET) -#define GPECONSLP (ELFIN_GPIO_BASE + GPECONSLP_OFFSET) -#define GPEPUDSLP (ELFIN_GPIO_BASE + GPEPUDSLP_OFFSET) -#define GPFCON (ELFIN_GPIO_BASE + GPFCON_OFFSET) -#define GPFDAT (ELFIN_GPIO_BASE + GPFDAT_OFFSET) -#define GPFPUD (ELFIN_GPIO_BASE + GPFPUD_OFFSET) -#define GPFCONSLP (ELFIN_GPIO_BASE + GPFCONSLP_OFFSET) -#define GPFPUDSLP (ELFIN_GPIO_BASE + GPFPUDSLP_OFFSET) -#define GPGCON (ELFIN_GPIO_BASE + GPGCON_OFFSET) -#define GPGDAT (ELFIN_GPIO_BASE + GPGDAT_OFFSET) -#define GPGPUD (ELFIN_GPIO_BASE + GPGPUD_OFFSET) -#define GPGCONSLP (ELFIN_GPIO_BASE + GPGCONSLP_OFFSET) -#define GPGPUDSLP (ELFIN_GPIO_BASE + GPGPUDSLP_OFFSET) -#define GPHCON0 (ELFIN_GPIO_BASE + GPHCON0_OFFSET) -#define GPHCON1 (ELFIN_GPIO_BASE + GPHCON1_OFFSET) -#define GPHDAT (ELFIN_GPIO_BASE + GPHDAT_OFFSET) -#define GPHPUD (ELFIN_GPIO_BASE + GPHPUD_OFFSET) -#define GPHCONSLP (ELFIN_GPIO_BASE + GPHCONSLP_OFFSET) -#define GPHPUDSLP (ELFIN_GPIO_BASE + GPHPUDSLP_OFFSET) -#define GPICON (ELFIN_GPIO_BASE + GPICON_OFFSET) -#define GPIDAT (ELFIN_GPIO_BASE + GPIDAT_OFFSET) -#define GPIPUD (ELFIN_GPIO_BASE + GPIPUD_OFFSET) -#define GPICONSLP (ELFIN_GPIO_BASE + GPICONSLP_OFFSET) -#define GPIPUDSLP (ELFIN_GPIO_BASE + GPIPUDSLP_OFFSET) -#define GPJCON (ELFIN_GPIO_BASE + GPJCON_OFFSET) -#define GPJDAT (ELFIN_GPIO_BASE + GPJDAT_OFFSET) -#define GPJPUD (ELFIN_GPIO_BASE + GPJPUD_OFFSET) -#define GPJCONSLP (ELFIN_GPIO_BASE + GPJCONSLP_OFFSET) -#define GPJPUDSLP (ELFIN_GPIO_BASE + GPJPUDSLP_OFFSET) -#define GPKCON0 (ELFIN_GPIO_BASE + GPKCON0_OFFSET) -#define GPKCON1 (ELFIN_GPIO_BASE + GPKCON1_OFFSET) -#define GPKDAT (ELFIN_GPIO_BASE + GPKDAT_OFFSET) -#define GPKPUD (ELFIN_GPIO_BASE + GPKPUD_OFFSET) -#define GPLCON0 (ELFIN_GPIO_BASE + GPLCON0_OFFSET) -#define GPLCON1 (ELFIN_GPIO_BASE + GPLCON1_OFFSET) -#define GPLDAT (ELFIN_GPIO_BASE + GPLDAT_OFFSET) -#define GPLPUD (ELFIN_GPIO_BASE + GPLPUD_OFFSET) -#define GPMCON (ELFIN_GPIO_BASE + GPMCON_OFFSET) -#define GPMDAT (ELFIN_GPIO_BASE + GPMDAT_OFFSET) -#define GPMPUD (ELFIN_GPIO_BASE + GPMPUD_OFFSET) -#define GPNCON (ELFIN_GPIO_BASE + GPNCON_OFFSET) -#define GPNDAT (ELFIN_GPIO_BASE + GPNDAT_OFFSET) -#define GPNPUD (ELFIN_GPIO_BASE + GPNPUD_OFFSET) -#define GPOCON (ELFIN_GPIO_BASE + GPOCON_OFFSET) -#define GPODAT (ELFIN_GPIO_BASE + GPODAT_OFFSET) -#define GPOPUD (ELFIN_GPIO_BASE + GPOPUD_OFFSET) -#define GPOCONSLP (ELFIN_GPIO_BASE + GPOCONSLP_OFFSET) -#define GPOPUDSLP (ELFIN_GPIO_BASE + GPOPUDSLP_OFFSET) -#define GPPCON (ELFIN_GPIO_BASE + GPPCON_OFFSET) -#define GPPDAT (ELFIN_GPIO_BASE + GPPDAT_OFFSET) -#define GPPPUD (ELFIN_GPIO_BASE + GPPPUD_OFFSET) -#define GPPCONSLP (ELFIN_GPIO_BASE + GPPCONSLP_OFFSET) -#define GPPPUDSLP (ELFIN_GPIO_BASE + GPPPUDSLP_OFFSET) -#define GPQCON (ELFIN_GPIO_BASE + GPQCON_OFFSET) -#define GPQDAT (ELFIN_GPIO_BASE + GPQDAT_OFFSET) -#define GPQPUD (ELFIN_GPIO_BASE + GPQPUD_OFFSET) -#define GPQCONSLP (ELFIN_GPIO_BASE + GPQCONSLP_OFFSET) -#define GPQPUDSLP (ELFIN_GPIO_BASE + GPQPUDSLP_OFFSET) - -/* - * Memory controller - */ -#define ELFIN_SROM_BASE 0x70000000 - -#define SROM_BW_REG __REG(ELFIN_SROM_BASE + 0x0) -#define SROM_BC0_REG __REG(ELFIN_SROM_BASE + 0x4) -#define SROM_BC1_REG __REG(ELFIN_SROM_BASE + 0x8) -#define SROM_BC2_REG __REG(ELFIN_SROM_BASE + 0xC) -#define SROM_BC3_REG __REG(ELFIN_SROM_BASE + 0x10) -#define SROM_BC4_REG __REG(ELFIN_SROM_BASE + 0x14) -#define SROM_BC5_REG __REG(ELFIN_SROM_BASE + 0x18) - -/* - * SDRAM Controller - */ -#define ELFIN_DMC0_BASE 0x7e000000 -#define ELFIN_DMC1_BASE 0x7e001000 - -#define INDEX_DMC_MEMC_STATUS 0x00 -#define INDEX_DMC_MEMC_CMD 0x04 -#define INDEX_DMC_DIRECT_CMD 0x08 -#define INDEX_DMC_MEMORY_CFG 0x0C -#define INDEX_DMC_REFRESH_PRD 0x10 -#define INDEX_DMC_CAS_LATENCY 0x14 -#define INDEX_DMC_T_DQSS 0x18 -#define INDEX_DMC_T_MRD 0x1C -#define INDEX_DMC_T_RAS 0x20 -#define INDEX_DMC_T_RC 0x24 -#define INDEX_DMC_T_RCD 0x28 -#define INDEX_DMC_T_RFC 0x2C -#define INDEX_DMC_T_RP 0x30 -#define INDEX_DMC_T_RRD 0x34 -#define INDEX_DMC_T_WR 0x38 -#define INDEX_DMC_T_WTR 0x3C -#define INDEX_DMC_T_XP 0x40 -#define INDEX_DMC_T_XSR 0x44 -#define INDEX_DMC_T_ESR 0x48 -#define INDEX_DMC_MEMORY_CFG2 0x4C -#define INDEX_DMC_CHIP_0_CFG 0x200 -#define INDEX_DMC_CHIP_1_CFG 0x204 -#define INDEX_DMC_CHIP_2_CFG 0x208 -#define INDEX_DMC_CHIP_3_CFG 0x20C -#define INDEX_DMC_USER_STATUS 0x300 -#define INDEX_DMC_USER_CONFIG 0x304 - -/* - * Memory Chip direct command - */ -#define DMC_NOP0 0x0c0000 -#define DMC_NOP1 0x1c0000 -#define DMC_PA0 0x000000 /* Precharge all */ -#define DMC_PA1 0x100000 -#define DMC_AR0 0x040000 /* Autorefresh */ -#define DMC_AR1 0x140000 -#define DMC_SDR_MR0 0x080032 /* MRS, CAS 3, Burst Length 4 */ -#define DMC_SDR_MR1 0x180032 -#define DMC_DDR_MR0 0x080162 -#define DMC_DDR_MR1 0x180162 -#define DMC_mDDR_MR0 0x080032 /* CAS 3, Burst Length 4 */ -#define DMC_mDDR_MR1 0x180032 -#define DMC_mSDR_EMR0 0x0a0000 /* EMRS, DS:Full, PASR:Full Array */ -#define DMC_mSDR_EMR1 0x1a0000 -#define DMC_DDR_EMR0 0x090000 -#define DMC_DDR_EMR1 0x190000 -#define DMC_mDDR_EMR0 0x0a0000 /* DS:Full, PASR:Full Array */ -#define DMC_mDDR_EMR1 0x1a0000 - -/* - * Definitions for memory configuration - * Set memory configuration - * active_chips = 1'b0 (1 chip) - * qos_master_chip = 3'b000(ARID[3:0]) - * memory burst = 3'b010(burst 4) - * stop_mem_clock = 1'b0(disable dynamical stop) - * auto_power_down = 1'b0(disable auto power-down mode) - * power_down_prd = 6'b00_0000(0 cycle for auto power-down) - * ap_bit = 1'b0 (bit position of auto-precharge is 10) - * row_bits = 3'b010(# row address 13) - * column_bits = 3'b010(# column address 10 ) - * - * Set user configuration - * 2'b10=SDRAM/mSDRAM, 2'b11=DDR, 2'b01=mDDR - * - * Set chip select for chip [n] - * row bank control, bank address 0x3000_0000 ~ 0x37ff_ffff - * CHIP_[n]_CFG=0x30F8, 30: ADDR[31:24], F8: Mask[31:24] - */ - -/* - * Nand flash controller - */ -#define ELFIN_NAND_BASE 0x70200000 - -#define NFCONF_OFFSET 0x00 -#define NFCONT_OFFSET 0x04 -#define NFCMMD_OFFSET 0x08 -#define NFADDR_OFFSET 0x0c -#define NFDATA_OFFSET 0x10 -#define NFMECCDATA0_OFFSET 0x14 -#define NFMECCDATA1_OFFSET 0x18 -#define NFSECCDATA0_OFFSET 0x1c -#define NFSBLK_OFFSET 0x20 -#define NFEBLK_OFFSET 0x24 -#define NFSTAT_OFFSET 0x28 -#define NFESTAT0_OFFSET 0x2c -#define NFESTAT1_OFFSET 0x30 -#define NFMECC0_OFFSET 0x34 -#define NFMECC1_OFFSET 0x38 -#define NFSECC_OFFSET 0x3c -#define NFMLCBITPT_OFFSET 0x40 - -#define NFCONF (ELFIN_NAND_BASE + NFCONF_OFFSET) -#define NFCONT (ELFIN_NAND_BASE + NFCONT_OFFSET) -#define NFCMMD (ELFIN_NAND_BASE + NFCMMD_OFFSET) -#define NFADDR (ELFIN_NAND_BASE + NFADDR_OFFSET) -#define NFDATA (ELFIN_NAND_BASE + NFDATA_OFFSET) -#define NFMECCDATA0 (ELFIN_NAND_BASE + NFMECCDATA0_OFFSET) -#define NFMECCDATA1 (ELFIN_NAND_BASE + NFMECCDATA1_OFFSET) -#define NFSECCDATA0 (ELFIN_NAND_BASE + NFSECCDATA0_OFFSET) -#define NFSBLK (ELFIN_NAND_BASE + NFSBLK_OFFSET) -#define NFEBLK (ELFIN_NAND_BASE + NFEBLK_OFFSET) -#define NFSTAT (ELFIN_NAND_BASE + NFSTAT_OFFSET) -#define NFESTAT0 (ELFIN_NAND_BASE + NFESTAT0_OFFSET) -#define NFESTAT1 (ELFIN_NAND_BASE + NFESTAT1_OFFSET) -#define NFMECC0 (ELFIN_NAND_BASE + NFMECC0_OFFSET) -#define NFMECC1 (ELFIN_NAND_BASE + NFMECC1_OFFSET) -#define NFSECC (ELFIN_NAND_BASE + NFSECC_OFFSET) -#define NFMLCBITPT (ELFIN_NAND_BASE + NFMLCBITPT_OFFSET) - -#define NFCONF_REG __REG(ELFIN_NAND_BASE + NFCONF_OFFSET) -#define NFCONT_REG __REG(ELFIN_NAND_BASE + NFCONT_OFFSET) -#define NFCMD_REG __REG(ELFIN_NAND_BASE + NFCMMD_OFFSET) -#define NFADDR_REG __REG(ELFIN_NAND_BASE + NFADDR_OFFSET) -#define NFDATA_REG __REG(ELFIN_NAND_BASE + NFDATA_OFFSET) -#define NFDATA8_REG __REGb(ELFIN_NAND_BASE + NFDATA_OFFSET) -#define NFMECCDATA0_REG __REG(ELFIN_NAND_BASE + NFMECCDATA0_OFFSET) -#define NFMECCDATA1_REG __REG(ELFIN_NAND_BASE + NFMECCDATA1_OFFSET) -#define NFSECCDATA0_REG __REG(ELFIN_NAND_BASE + NFSECCDATA0_OFFSET) -#define NFSBLK_REG __REG(ELFIN_NAND_BASE + NFSBLK_OFFSET) -#define NFEBLK_REG __REG(ELFIN_NAND_BASE + NFEBLK_OFFSET) -#define NFSTAT_REG __REG(ELFIN_NAND_BASE + NFSTAT_OFFSET) -#define NFESTAT0_REG __REG(ELFIN_NAND_BASE + NFESTAT0_OFFSET) -#define NFESTAT1_REG __REG(ELFIN_NAND_BASE + NFESTAT1_OFFSET) -#define NFMECC0_REG __REG(ELFIN_NAND_BASE + NFMECC0_OFFSET) -#define NFMECC1_REG __REG(ELFIN_NAND_BASE + NFMECC1_OFFSET) -#define NFSECC_REG __REG(ELFIN_NAND_BASE + NFSECC_OFFSET) -#define NFMLCBITPT_REG __REG(ELFIN_NAND_BASE + NFMLCBITPT_OFFSET) - -#define NFCONF_ECC_4BIT (1<<24) - -#define NFCONT_ECC_ENC (1<<18) -#define NFCONT_WP (1<<16) -#define NFCONT_MECCLOCK (1<<7) -#define NFCONT_SECCLOCK (1<<6) -#define NFCONT_INITMECC (1<<5) -#define NFCONT_INITSECC (1<<4) -#define NFCONT_INITECC (NFCONT_INITMECC | NFCONT_INITSECC) -#define NFCONT_CS_ALT (1<<2) -#define NFCONT_CS (1<<1) -#define NFCONT_ENABLE (1<<0) - -#define NFSTAT_ECCENCDONE (1<<7) -#define NFSTAT_ECCDECDONE (1<<6) -#define NFSTAT_RnB (1<<0) - -#define NFESTAT0_ECCBUSY (1<<31) - -/* - * Interrupt - */ -#define ELFIN_VIC0_BASE_ADDR 0x71200000 -#define ELFIN_VIC1_BASE_ADDR 0x71300000 -#define oINTMOD 0x0C /* VIC INT SELECT (IRQ or FIQ) */ -#define oINTUNMSK 0x10 /* VIC INT EN (write 1 to unmask) */ -#define oINTMSK 0x14 /* VIC INT EN CLEAR (write 1 to mask) */ -#define oINTSUBMSK 0x1C /* VIC SOFT INT CLEAR */ -#define oVECTADDR 0xF00 /* VIC ADDRESS */ - -/* - * Watchdog timer - */ -#define ELFIN_WATCHDOG_BASE 0x7E004000 - -#define WTCON_REG __REG(0x7E004004) -#define WTDAT_REG __REG(0x7E004008) -#define WTCNT_REG __REG(0x7E00400C) - - -/* - * UART - */ -#define ELFIN_UART_BASE 0x7F005000 - -#define ELFIN_UART0_OFFSET 0x0000 -#define ELFIN_UART1_OFFSET 0x0400 -#define ELFIN_UART2_OFFSET 0x0800 - -#define ULCON_OFFSET 0x00 -#define UCON_OFFSET 0x04 -#define UFCON_OFFSET 0x08 -#define UMCON_OFFSET 0x0C -#define UTRSTAT_OFFSET 0x10 -#define UERSTAT_OFFSET 0x14 -#define UFSTAT_OFFSET 0x18 -#define UMSTAT_OFFSET 0x1C -#define UTXH_OFFSET 0x20 -#define URXH_OFFSET 0x24 -#define UBRDIV_OFFSET 0x28 -#define UDIVSLOT_OFFSET 0x2C -#define UINTP_OFFSET 0x30 -#define UINTSP_OFFSET 0x34 -#define UINTM_OFFSET 0x38 - -#define ULCON0_REG __REG(0x7F005000) -#define UCON0_REG __REG(0x7F005004) -#define UFCON0_REG __REG(0x7F005008) -#define UMCON0_REG __REG(0x7F00500C) -#define UTRSTAT0_REG __REG(0x7F005010) -#define UERSTAT0_REG __REG(0x7F005014) -#define UFSTAT0_REG __REG(0x7F005018) -#define UMSTAT0_REG __REG(0x7F00501c) -#define UTXH0_REG __REG(0x7F005020) -#define URXH0_REG __REG(0x7F005024) -#define UBRDIV0_REG __REG(0x7F005028) -#define UDIVSLOT0_REG __REG(0x7F00502c) -#define UINTP0_REG __REG(0x7F005030) -#define UINTSP0_REG __REG(0x7F005034) -#define UINTM0_REG __REG(0x7F005038) - -#define ULCON1_REG __REG(0x7F005400) -#define UCON1_REG __REG(0x7F005404) -#define UFCON1_REG __REG(0x7F005408) -#define UMCON1_REG __REG(0x7F00540C) -#define UTRSTAT1_REG __REG(0x7F005410) -#define UERSTAT1_REG __REG(0x7F005414) -#define UFSTAT1_REG __REG(0x7F005418) -#define UMSTAT1_REG __REG(0x7F00541c) -#define UTXH1_REG __REG(0x7F005420) -#define URXH1_REG __REG(0x7F005424) -#define UBRDIV1_REG __REG(0x7F005428) -#define UDIVSLOT1_REG __REG(0x7F00542c) -#define UINTP1_REG __REG(0x7F005430) -#define UINTSP1_REG __REG(0x7F005434) -#define UINTM1_REG __REG(0x7F005438) - -#define UTRSTAT_TX_EMPTY (1 << 2) -#define UTRSTAT_RX_READY (1 << 0) -#define UART_ERR_MASK 0xF - -/* - * PWM timer - */ -#define ELFIN_TIMER_BASE 0x7F006000 - -#define TCFG0_REG __REG(0x7F006000) -#define TCFG1_REG __REG(0x7F006004) -#define TCON_REG __REG(0x7F006008) -#define TCNTB0_REG __REG(0x7F00600c) -#define TCMPB0_REG __REG(0x7F006010) -#define TCNTO0_REG __REG(0x7F006014) -#define TCNTB1_REG __REG(0x7F006018) -#define TCMPB1_REG __REG(0x7F00601c) -#define TCNTO1_REG __REG(0x7F006020) -#define TCNTB2_REG __REG(0x7F006024) -#define TCMPB2_REG __REG(0x7F006028) -#define TCNTO2_REG __REG(0x7F00602c) -#define TCNTB3_REG __REG(0x7F006030) -#define TCMPB3_REG __REG(0x7F006034) -#define TCNTO3_REG __REG(0x7F006038) -#define TCNTB4_REG __REG(0x7F00603c) -#define TCNTO4_REG __REG(0x7F006040) - -/* Fields */ -#define fTCFG0_DZONE Fld(8, 16) /* the dead zone length (=timer 0) */ -#define fTCFG0_PRE1 Fld(8, 8) /* prescaler value for time 2,3,4 */ -#define fTCFG0_PRE0 Fld(8, 0) /* prescaler value for time 0,1 */ -#define fTCFG1_MUX4 Fld(4, 16) -/* bits */ -#define TCFG0_DZONE(x) FInsrt((x), fTCFG0_DZONE) -#define TCFG0_PRE1(x) FInsrt((x), fTCFG0_PRE1) -#define TCFG0_PRE0(x) FInsrt((x), fTCFG0_PRE0) -#define TCON_4_AUTO (1 << 22) /* auto reload on/off for Timer 4 */ -#define TCON_4_UPDATE (1 << 21) /* manual Update TCNTB4 */ -#define TCON_4_ONOFF (1 << 20) /* 0: Stop, 1: start Timer 4 */ -#define COUNT_4_ON (TCON_4_ONOFF * 1) -#define COUNT_4_OFF (TCON_4_ONOFF * 0) -#define TCON_3_AUTO (1 << 19) /* auto reload on/off for Timer 3 */ -#define TIMER3_ATLOAD_ON (TCON_3_AUTO * 1) -#define TIMER3_ATLAOD_OFF FClrBit(TCON, TCON_3_AUTO) -#define TCON_3_INVERT (1 << 18) /* 1: Inverter on for TOUT3 */ -#define TIMER3_IVT_ON (TCON_3_INVERT * 1) -#define TIMER3_IVT_OFF (FClrBit(TCON, TCON_3_INVERT)) -#define TCON_3_MAN (1 << 17) /* manual Update TCNTB3,TCMPB3 */ -#define TIMER3_MANUP (TCON_3_MAN*1) -#define TIMER3_NOP (FClrBit(TCON, TCON_3_MAN)) -#define TCON_3_ONOFF (1 << 16) /* 0: Stop, 1: start Timer 3 */ -#define TIMER3_ON (TCON_3_ONOFF * 1) -#define TIMER3_OFF (FClrBit(TCON, TCON_3_ONOFF)) - -#if defined(CONFIG_CLK_400_100_50) -#define STARTUP_AMDIV 400 -#define STARTUP_MDIV 400 -#define STARTUP_PDIV 6 -#define STARTUP_SDIV 1 -#elif defined(CONFIG_CLK_400_133_66) -#define STARTUP_AMDIV 400 -#define STARTUP_MDIV 533 -#define STARTUP_PDIV 6 -#define STARTUP_SDIV 1 -#elif defined(CONFIG_CLK_533_133_66) -#define STARTUP_AMDIV 533 -#define STARTUP_MDIV 533 -#define STARTUP_PDIV 6 -#define STARTUP_SDIV 1 -#elif defined(CONFIG_CLK_667_133_66) -#define STARTUP_AMDIV 667 -#define STARTUP_MDIV 533 -#define STARTUP_PDIV 6 -#define STARTUP_SDIV 1 -#endif - -#define STARTUP_PCLKDIV 3 -#define STARTUP_HCLKX2DIV 1 -#define STARTUP_HCLKDIV 1 -#define STARTUP_MPLLDIV 1 -#define STARTUP_APLLDIV 0 - -#define CLK_DIV_VAL ((STARTUP_PCLKDIV << 12) | (STARTUP_HCLKX2DIV << 9) | \ - (STARTUP_HCLKDIV << 8) | (STARTUP_MPLLDIV<<4) | STARTUP_APLLDIV) -#define MPLL_VAL ((1 << 31) | (STARTUP_MDIV << 16) | \ - (STARTUP_PDIV << 8) | STARTUP_SDIV) -#define STARTUP_MPLL (((CONFIG_SYS_CLK_FREQ >> STARTUP_SDIV) / \ - STARTUP_PDIV) * STARTUP_MDIV) - -#if defined(CONFIG_SYNC_MODE) -#define APLL_VAL ((1 << 31) | (STARTUP_MDIV << 16) | \ - (STARTUP_PDIV << 8) | STARTUP_SDIV) -#define STARTUP_APLL (((CONFIG_SYS_CLK_FREQ >> STARTUP_SDIV) / \ - STARTUP_PDIV) * STARTUP_MDIV) -#define STARTUP_HCLK (STARTUP_MPLL / (STARTUP_HCLKX2DIV + 1) / \ - (STARTUP_HCLKDIV + 1)) -#else -#define APLL_VAL ((1 << 31) | (STARTUP_AMDIV << 16) | \ - (STARTUP_PDIV << 8) | STARTUP_SDIV) -#define STARTUP_APLL (((CONFIG_SYS_CLK_FREQ >> STARTUP_SDIV) / \ - STARTUP_PDIV) * STARTUP_AMDIV) -#define STARTUP_HCLK (STARTUP_MPLL / (STARTUP_HCLKX2DIV + 1) / \ - (STARTUP_HCLKDIV + 1)) -#endif - - -/*----------------------------------------------------------------------- - * Physical Memory Map - */ -#define DMC1_MEM_CFG 0x80010012 /* Chip1, Burst4, Row/Column bit */ -#define DMC1_MEM_CFG2 0xB45 -#define DMC1_CHIP0_CFG 0x150F8 /* 0x4000_0000 ~ 0x43ff_ffff (64MB) */ -#define DMC_DDR_32_CFG 0x0 /* 32bit, DDR */ - -/* Memory Parameters */ -/* DDR Parameters */ -#define DDR_tREFRESH 7800 /* ns */ -#define DDR_tRAS 45 /* ns (min: 45ns)*/ -#define DDR_tRC 68 /* ns (min: 67.5ns)*/ -#define DDR_tRCD 23 /* ns (min: 22.5ns)*/ -#define DDR_tRFC 80 /* ns (min: 80ns)*/ -#define DDR_tRP 23 /* ns (min: 22.5ns)*/ -#define DDR_tRRD 15 /* ns (min: 15ns)*/ -#define DDR_tWR 15 /* ns (min: 15ns)*/ -#define DDR_tXSR 120 /* ns (min: 120ns)*/ -#define DDR_CASL 3 /* CAS Latency 3 */ - -/* - * mDDR memory configuration - */ - -#define NS_TO_CLK(t) ((STARTUP_HCLK / 1000 * (t) - 1) / 1000000) - -#define DMC_DDR_BA_EMRS 2 -#define DMC_DDR_MEM_CASLAT 3 -/* 6 Set Cas Latency to 3 */ -#define DMC_DDR_CAS_LATENCY (DDR_CASL << 1) -/* Min 0.75 ~ 1.25 */ -#define DMC_DDR_t_DQSS 1 -/* Min 2 tck */ -#define DMC_DDR_t_MRD 2 -/* 7, Min 45ns */ -#define DMC_DDR_t_RAS (NS_TO_CLK(DDR_tRAS) + 1) -/* 10, Min 67.5ns */ -#define DMC_DDR_t_RC (NS_TO_CLK(DDR_tRC) + 1) -/* 4,5(TRM), Min 22.5ns */ -#define DMC_DDR_t_RCD (NS_TO_CLK(DDR_tRCD) + 1) -#define DMC_DDR_schedule_RCD ((DMC_DDR_t_RCD - 3) << 3) -/* 11,18(TRM) Min 80ns */ -#define DMC_DDR_t_RFC (NS_TO_CLK(DDR_tRFC) + 1) -#define DMC_DDR_schedule_RFC ((DMC_DDR_t_RFC - 3) << 5) -/* 4, 5(TRM) Min 22.5ns */ -#define DMC_DDR_t_RP (NS_TO_CLK(DDR_tRP) + 1) -#define DMC_DDR_schedule_RP ((DMC_DDR_t_RP - 3) << 3) -/* 3, Min 15ns */ -#define DMC_DDR_t_RRD (NS_TO_CLK(DDR_tRRD) + 1) -/* Min 15ns */ -#define DMC_DDR_t_WR (NS_TO_CLK(DDR_tWR) + 1) -#define DMC_DDR_t_WTR 2 -/* 1tck + tIS(1.5ns) */ -#define DMC_DDR_t_XP 2 -/* 17, Min 120ns */ -#define DMC_DDR_t_XSR (NS_TO_CLK(DDR_tXSR) + 1) -#define DMC_DDR_t_ESR DMC_DDR_t_XSR -/* TRM 2656 */ -#define DMC_DDR_REFRESH_PRD (NS_TO_CLK(DDR_tREFRESH)) -/* 2b01 : mDDR */ -#define DMC_DDR_USER_CONFIG 1 - -#ifndef __ASSEMBLY__ -enum s3c64xx_uarts_nr { - S3C64XX_UART0, - S3C64XX_UART1, - S3C64XX_UART2, -}; - -#include "s3c64x0.h" - -static inline s3c64xx_uart *s3c64xx_get_base_uart(enum s3c64xx_uarts_nr nr) -{ - return (s3c64xx_uart *)(ELFIN_UART_BASE + (nr * 0x400)); -} -#endif - -#endif /*__S3C6400_H__*/ diff --git a/include/s3c64x0.h b/include/s3c64x0.h deleted file mode 100644 index 0bbf1d0c4..000000000 --- a/include/s3c64x0.h +++ /dev/null @@ -1,90 +0,0 @@ -/* - * (C) Copyright 2003 - * David MÃŒller ELSOFT AG Switzerland. d.mueller@elsoft.ch - * - * (C) Copyright 2008 - * Guennadi Liakhovetki, DENX Software Engineering, - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/************************************************ - * NAME : S3C64XX.h - * Version : 31.3.2003 - * - * common stuff for SAMSUNG S3C64XX SoC - ************************************************/ - -#ifndef __S3C64XX_H__ -#define __S3C64XX_H__ - -#if defined(CONFIG_SYNC_MODE) && defined(CONFIG_S3C6400) -#error CONFIG_SYNC_MODE unavailable on S3C6400, please, fix your configuration! -#endif - -#include - -/* UART (see manual chapter 11) */ -typedef struct { - volatile u32 ULCON; - volatile u32 UCON; - volatile u32 UFCON; - volatile u32 UMCON; - volatile u32 UTRSTAT; - volatile u32 UERSTAT; - volatile u32 UFSTAT; - volatile u32 UMSTAT; -#ifdef __BIG_ENDIAN - volatile u8 res1[3]; - volatile u8 UTXH; - volatile u8 res2[3]; - volatile u8 URXH; -#else /* Little Endian */ - volatile u8 UTXH; - volatile u8 res1[3]; - volatile u8 URXH; - volatile u8 res2[3]; -#endif - volatile u32 UBRDIV; -#ifdef __BIG_ENDIAN - volatile u8 res3[2]; - volatile u16 UDIVSLOT; -#else - volatile u16 UDIVSLOT; - volatile u8 res3[2]; -#endif -} s3c64xx_uart; - -/* PWM TIMER (see manual chapter 10) */ -typedef struct { - volatile u32 TCNTB; - volatile u32 TCMPB; - volatile u32 TCNTO; -} s3c64xx_timer; - -typedef struct { - volatile u32 TCFG0; - volatile u32 TCFG1; - volatile u32 TCON; - s3c64xx_timer ch[4]; - volatile u32 TCNTB4; - volatile u32 TCNTO4; -} s3c64xx_timers; - -#endif /*__S3C64XX_H__*/ -- cgit v1.2.3 From 9ebfdc202275bcd9eb4af56e32bfb4253ff1b781 Mon Sep 17 00:00:00 2001 From: "kevin.morfitt@fearnside-systems.co.uk" Date: Wed, 4 Nov 2009 17:49:31 +0900 Subject: Clean-up of s3c24x0 header files Cleans up the s3c24x0 header files: s4c24x0.h: removes the use of 'volatile' from the S3C24X0_REG8, S3C24X0_REG16 and S3C24X0_REG32 register typedef's. Registers are always accessed using the IO accessor functions which cast the register address as 'volatile' anyway so it isn't required here. s3c2400.h and s3c2410.h: insert a blank line between the static inline functions Signed-off-by: Kevin Morfitt --- board/mpl/vcma9/vcma9.h | 14 +- include/asm-arm/arch-s3c24x0/s3c2400.h | 16 + include/asm-arm/arch-s3c24x0/s3c2410.h | 17 + include/asm-arm/arch-s3c24x0/s3c24x0.h | 904 ++++++++++++++++----------------- 4 files changed, 490 insertions(+), 461 deletions(-) (limited to 'board') diff --git a/board/mpl/vcma9/vcma9.h b/board/mpl/vcma9/vcma9.h index 9f32808c6..2c4305c6a 100644 --- a/board/mpl/vcma9/vcma9.h +++ b/board/mpl/vcma9/vcma9.h @@ -118,13 +118,13 @@ static inline u32 NF_Read_ECC(void) /* VCMA9 PLD regsiters */ typedef struct { - S3C24X0_REG8 ID; - S3C24X0_REG8 NIC; - S3C24X0_REG8 CAN; - S3C24X0_REG8 MISC; - S3C24X0_REG8 GPCD; - S3C24X0_REG8 BOARD; - S3C24X0_REG8 SDRAM; + u8 ID; + u8 NIC; + u8 CAN; + u8 MISC; + u8 GPCD; + u8 BOARD; + u8 SDRAM; } /*__attribute__((__packed__))*/ VCMA9_PLD; #define VCMA9_PLD_BASE 0x2C000100 diff --git a/include/asm-arm/arch-s3c24x0/s3c2400.h b/include/asm-arm/arch-s3c24x0/s3c2400.h index 26bd4e49a..2678be154 100644 --- a/include/asm-arm/arch-s3c24x0/s3c2400.h +++ b/include/asm-arm/arch-s3c24x0/s3c2400.h @@ -67,67 +67,83 @@ static inline struct s3c24x0_memctl *s3c24x0_get_base_memctl(void) { return (struct s3c24x0_memctl *)S3C24X0_MEMCTL_BASE; } + static inline struct s3c24x0_usb_host *s3c24x0_get_base_usb_host(void) { return (struct s3c24x0_usb_host *)S3C24X0_USB_HOST_BASE; } + static inline struct s3c24x0_interrupt *s3c24x0_get_base_interrupt(void) { return (struct s3c24x0_interrupt *)S3C24X0_INTERRUPT_BASE; } + static inline struct s3c24x0_dmas *s3c24x0_get_base_dmas(void) { return (struct s3c24x0_dmas *)S3C24X0_DMA_BASE; } + static inline struct s3c24x0_clock_power *s3c24x0_get_base_clock_power(void) { return (struct s3c24x0_clock_power *)S3C24X0_CLOCK_POWER_BASE; } + static inline struct s3c24x0_lcd *s3c24x0_get_base_lcd(void) { return (struct s3c24x0_lcd *)S3C24X0_LCD_BASE; } + static inline struct s3c24x0_uart *s3c24x0_get_base_uart(enum s3c24x0_uarts_nr n) { return (struct s3c24x0_uart *)(S3C24X0_UART_BASE + (n * 0x4000)); } + static inline struct s3c24x0_timers *s3c24x0_get_base_timers(void) { return (struct s3c24x0_timers *)S3C24X0_TIMER_BASE; } + static inline struct s3c24x0_usb_device *s3c24x0_get_base_usb_device(void) { return (struct s3c24x0_usb_device *)S3C24X0_USB_DEVICE_BASE; } + static inline struct s3c24x0_watchdog *s3c24x0_get_base_watchdog(void) { return (struct s3c24x0_watchdog *)S3C24X0_WATCHDOG_BASE; } + static inline struct s3c24x0_i2c *s3c24x0_get_base_i2c(void) { return (struct s3c24x0_i2c *)S3C24X0_I2C_BASE; } + static inline struct s3c24x0_i2s *s3c24x0_get_base_i2s(void) { return (struct s3c24x0_i2s *)S3C24X0_I2S_BASE; } + static inline struct s3c24x0_gpio *s3c24x0_get_base_gpio(void) { return (struct s3c24x0_gpio *)S3C24X0_GPIO_BASE; } + static inline struct s3c24x0_rtc *s3c24x0_get_base_rtc(void) { return (struct s3c24x0_rtc *)S3C24X0_RTC_BASE; } + static inline struct s3c2400_adc *s3c2400_get_base_adc(void) { return (struct s3c2400_adc *)S3C24X0_ADC_BASE; } + static inline struct s3c24x0_spi *s3c24x0_get_base_spi(void) { return (struct s3c24x0_spi *)S3C24X0_SPI_BASE; } + static inline struct s3c2400_mmc *s3c2400_get_base_mmc(void) { return (struct s3c2400_mmc *)S3C2400_MMC_BASE; diff --git a/include/asm-arm/arch-s3c24x0/s3c2410.h b/include/asm-arm/arch-s3c24x0/s3c2410.h index be2e76e5f..0543fe156 100644 --- a/include/asm-arm/arch-s3c24x0/s3c2410.h +++ b/include/asm-arm/arch-s3c24x0/s3c2410.h @@ -73,71 +73,88 @@ static inline struct s3c24x0_memctl *s3c24x0_get_base_memctl(void) { return (struct s3c24x0_memctl *)S3C24X0_MEMCTL_BASE; } + static inline struct s3c24x0_usb_host *s3c24x0_get_base_usb_host(void) { return (struct s3c24x0_usb_host *)S3C24X0_USB_HOST_BASE; } + static inline struct s3c24x0_interrupt *s3c24x0_get_base_interrupt(void) { return (struct s3c24x0_interrupt *)S3C24X0_INTERRUPT_BASE; } + static inline struct s3c24x0_dmas *s3c24x0_get_base_dmas(void) { return (struct s3c24x0_dmas *)S3C24X0_DMA_BASE; } + static inline struct s3c24x0_clock_power *s3c24x0_get_base_clock_power(void) { return (struct s3c24x0_clock_power *)S3C24X0_CLOCK_POWER_BASE; } + static inline struct s3c24x0_lcd *s3c24x0_get_base_lcd(void) { return (struct s3c24x0_lcd *)S3C24X0_LCD_BASE; } + static inline struct s3c2410_nand *s3c2410_get_base_nand(void) { return (struct s3c2410_nand *)S3C2410_NAND_BASE; } + static inline struct s3c24x0_uart *s3c24x0_get_base_uart(enum s3c24x0_uarts_nr n) { return (struct s3c24x0_uart *)(S3C24X0_UART_BASE + (n * 0x4000)); } + static inline struct s3c24x0_timers *s3c24x0_get_base_timers(void) { return (struct s3c24x0_timers *)S3C24X0_TIMER_BASE; } + static inline struct s3c24x0_usb_device *s3c24x0_get_base_usb_device(void) { return (struct s3c24x0_usb_device *)S3C24X0_USB_DEVICE_BASE; } + static inline struct s3c24x0_watchdog *s3c24x0_get_base_watchdog(void) { return (struct s3c24x0_watchdog *)S3C24X0_WATCHDOG_BASE; } + static inline struct s3c24x0_i2c *s3c24x0_get_base_i2c(void) { return (struct s3c24x0_i2c *)S3C24X0_I2C_BASE; } + static inline struct s3c24x0_i2s *s3c24x0_get_base_i2s(void) { return (struct s3c24x0_i2s *)S3C24X0_I2S_BASE; } + static inline struct s3c24x0_gpio *s3c24x0_get_base_gpio(void) { return (struct s3c24x0_gpio *)S3C24X0_GPIO_BASE; } + static inline struct s3c24x0_rtc *s3c24x0_get_base_rtc(void) { return (struct s3c24x0_rtc *)S3C24X0_RTC_BASE; } + static inline struct s3c2410_adc *s3c2410_get_base_adc(void) { return (struct s3c2410_adc *)S3C2410_ADC_BASE; } + static inline struct s3c24x0_spi *s3c24x0_get_base_spi(void) { return (struct s3c24x0_spi *)S3C24X0_SPI_BASE; } + static inline struct s3c2410_sdi *s3c2410_get_base_sdi(void) { return (struct s3c2410_sdi *)S3C2410_SDI_BASE; diff --git a/include/asm-arm/arch-s3c24x0/s3c24x0.h b/include/asm-arm/arch-s3c24x0/s3c24x0.h index 56a551aeb..15f53dd35 100644 --- a/include/asm-arm/arch-s3c24x0/s3c24x0.h +++ b/include/asm-arm/arch-s3c24x0/s3c24x0.h @@ -31,84 +31,80 @@ #ifndef __S3C24X0_H__ #define __S3C24X0_H__ -typedef volatile u8 S3C24X0_REG8; -typedef volatile u16 S3C24X0_REG16; -typedef volatile u32 S3C24X0_REG32; - /* Memory controller (see manual chapter 5) */ struct s3c24x0_memctl { - S3C24X0_REG32 BWSCON; - S3C24X0_REG32 BANKCON[8]; - S3C24X0_REG32 REFRESH; - S3C24X0_REG32 BANKSIZE; - S3C24X0_REG32 MRSRB6; - S3C24X0_REG32 MRSRB7; + u32 BWSCON; + u32 BANKCON[8]; + u32 REFRESH; + u32 BANKSIZE; + u32 MRSRB6; + u32 MRSRB7; }; /* USB HOST (see manual chapter 12) */ struct s3c24x0_usb_host { - S3C24X0_REG32 HcRevision; - S3C24X0_REG32 HcControl; - S3C24X0_REG32 HcCommonStatus; - S3C24X0_REG32 HcInterruptStatus; - S3C24X0_REG32 HcInterruptEnable; - S3C24X0_REG32 HcInterruptDisable; - S3C24X0_REG32 HcHCCA; - S3C24X0_REG32 HcPeriodCuttendED; - S3C24X0_REG32 HcControlHeadED; - S3C24X0_REG32 HcControlCurrentED; - S3C24X0_REG32 HcBulkHeadED; - S3C24X0_REG32 HcBuldCurrentED; - S3C24X0_REG32 HcDoneHead; - S3C24X0_REG32 HcRmInterval; - S3C24X0_REG32 HcFmRemaining; - S3C24X0_REG32 HcFmNumber; - S3C24X0_REG32 HcPeriodicStart; - S3C24X0_REG32 HcLSThreshold; - S3C24X0_REG32 HcRhDescriptorA; - S3C24X0_REG32 HcRhDescriptorB; - S3C24X0_REG32 HcRhStatus; - S3C24X0_REG32 HcRhPortStatus1; - S3C24X0_REG32 HcRhPortStatus2; + u32 HcRevision; + u32 HcControl; + u32 HcCommonStatus; + u32 HcInterruptStatus; + u32 HcInterruptEnable; + u32 HcInterruptDisable; + u32 HcHCCA; + u32 HcPeriodCuttendED; + u32 HcControlHeadED; + u32 HcControlCurrentED; + u32 HcBulkHeadED; + u32 HcBuldCurrentED; + u32 HcDoneHead; + u32 HcRmInterval; + u32 HcFmRemaining; + u32 HcFmNumber; + u32 HcPeriodicStart; + u32 HcLSThreshold; + u32 HcRhDescriptorA; + u32 HcRhDescriptorB; + u32 HcRhStatus; + u32 HcRhPortStatus1; + u32 HcRhPortStatus2; }; /* INTERRUPT (see manual chapter 14) */ struct s3c24x0_interrupt { - S3C24X0_REG32 SRCPND; - S3C24X0_REG32 INTMOD; - S3C24X0_REG32 INTMSK; - S3C24X0_REG32 PRIORITY; - S3C24X0_REG32 INTPND; - S3C24X0_REG32 INTOFFSET; + u32 SRCPND; + u32 INTMOD; + u32 INTMSK; + u32 PRIORITY; + u32 INTPND; + u32 INTOFFSET; #ifdef CONFIG_S3C2410 - S3C24X0_REG32 SUBSRCPND; - S3C24X0_REG32 INTSUBMSK; + u32 SUBSRCPND; + u32 INTSUBMSK; #endif }; /* DMAS (see manual chapter 8) */ struct s3c24x0_dma { - S3C24X0_REG32 DISRC; + u32 DISRC; #ifdef CONFIG_S3C2410 - S3C24X0_REG32 DISRCC; + u32 DISRCC; #endif - S3C24X0_REG32 DIDST; + u32 DIDST; #ifdef CONFIG_S3C2410 - S3C24X0_REG32 DIDSTC; + u32 DIDSTC; #endif - S3C24X0_REG32 DCON; - S3C24X0_REG32 DSTAT; - S3C24X0_REG32 DCSRC; - S3C24X0_REG32 DCDST; - S3C24X0_REG32 DMASKTRIG; + u32 DCON; + u32 DSTAT; + u32 DCSRC; + u32 DCDST; + u32 DMASKTRIG; #ifdef CONFIG_S3C2400 - S3C24X0_REG32 res[1]; + u32 res[1]; #endif #ifdef CONFIG_S3C2410 - S3C24X0_REG32 res[7]; + u32 res[7]; #endif }; @@ -120,201 +116,201 @@ struct s3c24x0_dmas { /* CLOCK & POWER MANAGEMENT (see S3C2400 manual chapter 6) */ /* (see S3C2410 manual chapter 7) */ struct s3c24x0_clock_power { - S3C24X0_REG32 LOCKTIME; - S3C24X0_REG32 MPLLCON; - S3C24X0_REG32 UPLLCON; - S3C24X0_REG32 CLKCON; - S3C24X0_REG32 CLKSLOW; - S3C24X0_REG32 CLKDIVN; + u32 LOCKTIME; + u32 MPLLCON; + u32 UPLLCON; + u32 CLKCON; + u32 CLKSLOW; + u32 CLKDIVN; }; /* LCD CONTROLLER (see manual chapter 15) */ struct s3c24x0_lcd { - S3C24X0_REG32 LCDCON1; - S3C24X0_REG32 LCDCON2; - S3C24X0_REG32 LCDCON3; - S3C24X0_REG32 LCDCON4; - S3C24X0_REG32 LCDCON5; - S3C24X0_REG32 LCDSADDR1; - S3C24X0_REG32 LCDSADDR2; - S3C24X0_REG32 LCDSADDR3; - S3C24X0_REG32 REDLUT; - S3C24X0_REG32 GREENLUT; - S3C24X0_REG32 BLUELUT; - S3C24X0_REG32 res[8]; - S3C24X0_REG32 DITHMODE; - S3C24X0_REG32 TPAL; + u32 LCDCON1; + u32 LCDCON2; + u32 LCDCON3; + u32 LCDCON4; + u32 LCDCON5; + u32 LCDSADDR1; + u32 LCDSADDR2; + u32 LCDSADDR3; + u32 REDLUT; + u32 GREENLUT; + u32 BLUELUT; + u32 res[8]; + u32 DITHMODE; + u32 TPAL; #ifdef CONFIG_S3C2410 - S3C24X0_REG32 LCDINTPND; - S3C24X0_REG32 LCDSRCPND; - S3C24X0_REG32 LCDINTMSK; - S3C24X0_REG32 LPCSEL; + u32 LCDINTPND; + u32 LCDSRCPND; + u32 LCDINTMSK; + u32 LPCSEL; #endif }; /* NAND FLASH (see S3C2410 manual chapter 6) */ struct s3c2410_nand { - S3C24X0_REG32 NFCONF; - S3C24X0_REG32 NFCMD; - S3C24X0_REG32 NFADDR; - S3C24X0_REG32 NFDATA; - S3C24X0_REG32 NFSTAT; - S3C24X0_REG32 NFECC; + u32 NFCONF; + u32 NFCMD; + u32 NFADDR; + u32 NFDATA; + u32 NFSTAT; + u32 NFECC; }; /* UART (see manual chapter 11) */ struct s3c24x0_uart { - S3C24X0_REG32 ULCON; - S3C24X0_REG32 UCON; - S3C24X0_REG32 UFCON; - S3C24X0_REG32 UMCON; - S3C24X0_REG32 UTRSTAT; - S3C24X0_REG32 UERSTAT; - S3C24X0_REG32 UFSTAT; - S3C24X0_REG32 UMSTAT; + u32 ULCON; + u32 UCON; + u32 UFCON; + u32 UMCON; + u32 UTRSTAT; + u32 UERSTAT; + u32 UFSTAT; + u32 UMSTAT; #ifdef __BIG_ENDIAN - S3C24X0_REG8 res1[3]; - S3C24X0_REG8 UTXH; - S3C24X0_REG8 res2[3]; - S3C24X0_REG8 URXH; + u8 res1[3]; + u8 UTXH; + u8 res2[3]; + u8 URXH; #else /* Little Endian */ - S3C24X0_REG8 UTXH; - S3C24X0_REG8 res1[3]; - S3C24X0_REG8 URXH; - S3C24X0_REG8 res2[3]; + u8 UTXH; + u8 res1[3]; + u8 URXH; + u8 res2[3]; #endif - S3C24X0_REG32 UBRDIV; + u32 UBRDIV; }; /* PWM TIMER (see manual chapter 10) */ struct s3c24x0_timer { - S3C24X0_REG32 TCNTB; - S3C24X0_REG32 TCMPB; - S3C24X0_REG32 TCNTO; + u32 TCNTB; + u32 TCMPB; + u32 TCNTO; }; struct s3c24x0_timers { - S3C24X0_REG32 TCFG0; - S3C24X0_REG32 TCFG1; - S3C24X0_REG32 TCON; + u32 TCFG0; + u32 TCFG1; + u32 TCON; struct s3c24x0_timer ch[4]; - S3C24X0_REG32 TCNTB4; - S3C24X0_REG32 TCNTO4; + u32 TCNTB4; + u32 TCNTO4; }; /* USB DEVICE (see manual chapter 13) */ struct s3c24x0_usb_dev_fifos { #ifdef __BIG_ENDIAN - S3C24X0_REG8 res[3]; - S3C24X0_REG8 EP_FIFO_REG; + u8 res[3]; + u8 EP_FIFO_REG; #else /* little endian */ - S3C24X0_REG8 EP_FIFO_REG; - S3C24X0_REG8 res[3]; + u8 EP_FIFO_REG; + u8 res[3]; #endif }; struct s3c24x0_usb_dev_dmas { #ifdef __BIG_ENDIAN - S3C24X0_REG8 res1[3]; - S3C24X0_REG8 EP_DMA_CON; - S3C24X0_REG8 res2[3]; - S3C24X0_REG8 EP_DMA_UNIT; - S3C24X0_REG8 res3[3]; - S3C24X0_REG8 EP_DMA_FIFO; - S3C24X0_REG8 res4[3]; - S3C24X0_REG8 EP_DMA_TTC_L; - S3C24X0_REG8 res5[3]; - S3C24X0_REG8 EP_DMA_TTC_M; - S3C24X0_REG8 res6[3]; - S3C24X0_REG8 EP_DMA_TTC_H; + u8 res1[3]; + u8 EP_DMA_CON; + u8 res2[3]; + u8 EP_DMA_UNIT; + u8 res3[3]; + u8 EP_DMA_FIFO; + u8 res4[3]; + u8 EP_DMA_TTC_L; + u8 res5[3]; + u8 EP_DMA_TTC_M; + u8 res6[3]; + u8 EP_DMA_TTC_H; #else /* little endian */ - S3C24X0_REG8 EP_DMA_CON; - S3C24X0_REG8 res1[3]; - S3C24X0_REG8 EP_DMA_UNIT; - S3C24X0_REG8 res2[3]; - S3C24X0_REG8 EP_DMA_FIFO; - S3C24X0_REG8 res3[3]; - S3C24X0_REG8 EP_DMA_TTC_L; - S3C24X0_REG8 res4[3]; - S3C24X0_REG8 EP_DMA_TTC_M; - S3C24X0_REG8 res5[3]; - S3C24X0_REG8 EP_DMA_TTC_H; - S3C24X0_REG8 res6[3]; + u8 EP_DMA_CON; + u8 res1[3]; + u8 EP_DMA_UNIT; + u8 res2[3]; + u8 EP_DMA_FIFO; + u8 res3[3]; + u8 EP_DMA_TTC_L; + u8 res4[3]; + u8 EP_DMA_TTC_M; + u8 res5[3]; + u8 EP_DMA_TTC_H; + u8 res6[3]; #endif }; struct s3c24x0_usb_device { #ifdef __BIG_ENDIAN - S3C24X0_REG8 res1[3]; - S3C24X0_REG8 FUNC_ADDR_REG; - S3C24X0_REG8 res2[3]; - S3C24X0_REG8 PWR_REG; - S3C24X0_REG8 res3[3]; - S3C24X0_REG8 EP_INT_REG; - S3C24X0_REG8 res4[15]; - S3C24X0_REG8 USB_INT_REG; - S3C24X0_REG8 res5[3]; - S3C24X0_REG8 EP_INT_EN_REG; - S3C24X0_REG8 res6[15]; - S3C24X0_REG8 USB_INT_EN_REG; - S3C24X0_REG8 res7[3]; - S3C24X0_REG8 FRAME_NUM1_REG; - S3C24X0_REG8 res8[3]; - S3C24X0_REG8 FRAME_NUM2_REG; - S3C24X0_REG8 res9[3]; - S3C24X0_REG8 INDEX_REG; - S3C24X0_REG8 res10[7]; - S3C24X0_REG8 MAXP_REG; - S3C24X0_REG8 res11[3]; - S3C24X0_REG8 EP0_CSR_IN_CSR1_REG; - S3C24X0_REG8 res12[3]; - S3C24X0_REG8 IN_CSR2_REG; - S3C24X0_REG8 res13[7]; - S3C24X0_REG8 OUT_CSR1_REG; - S3C24X0_REG8 res14[3]; - S3C24X0_REG8 OUT_CSR2_REG; - S3C24X0_REG8 res15[3]; - S3C24X0_REG8 OUT_FIFO_CNT1_REG; - S3C24X0_REG8 res16[3]; - S3C24X0_REG8 OUT_FIFO_CNT2_REG; + u8 res1[3]; + u8 FUNC_ADDR_REG; + u8 res2[3]; + u8 PWR_REG; + u8 res3[3]; + u8 EP_INT_REG; + u8 res4[15]; + u8 USB_INT_REG; + u8 res5[3]; + u8 EP_INT_EN_REG; + u8 res6[15]; + u8 USB_INT_EN_REG; + u8 res7[3]; + u8 FRAME_NUM1_REG; + u8 res8[3]; + u8 FRAME_NUM2_REG; + u8 res9[3]; + u8 INDEX_REG; + u8 res10[7]; + u8 MAXP_REG; + u8 res11[3]; + u8 EP0_CSR_IN_CSR1_REG; + u8 res12[3]; + u8 IN_CSR2_REG; + u8 res13[7]; + u8 OUT_CSR1_REG; + u8 res14[3]; + u8 OUT_CSR2_REG; + u8 res15[3]; + u8 OUT_FIFO_CNT1_REG; + u8 res16[3]; + u8 OUT_FIFO_CNT2_REG; #else /* little endian */ - S3C24X0_REG8 FUNC_ADDR_REG; - S3C24X0_REG8 res1[3]; - S3C24X0_REG8 PWR_REG; - S3C24X0_REG8 res2[3]; - S3C24X0_REG8 EP_INT_REG; - S3C24X0_REG8 res3[15]; - S3C24X0_REG8 USB_INT_REG; - S3C24X0_REG8 res4[3]; - S3C24X0_REG8 EP_INT_EN_REG; - S3C24X0_REG8 res5[15]; - S3C24X0_REG8 USB_INT_EN_REG; - S3C24X0_REG8 res6[3]; - S3C24X0_REG8 FRAME_NUM1_REG; - S3C24X0_REG8 res7[3]; - S3C24X0_REG8 FRAME_NUM2_REG; - S3C24X0_REG8 res8[3]; - S3C24X0_REG8 INDEX_REG; - S3C24X0_REG8 res9[7]; - S3C24X0_REG8 MAXP_REG; - S3C24X0_REG8 res10[7]; - S3C24X0_REG8 EP0_CSR_IN_CSR1_REG; - S3C24X0_REG8 res11[3]; - S3C24X0_REG8 IN_CSR2_REG; - S3C24X0_REG8 res12[3]; - S3C24X0_REG8 OUT_CSR1_REG; - S3C24X0_REG8 res13[7]; - S3C24X0_REG8 OUT_CSR2_REG; - S3C24X0_REG8 res14[3]; - S3C24X0_REG8 OUT_FIFO_CNT1_REG; - S3C24X0_REG8 res15[3]; - S3C24X0_REG8 OUT_FIFO_CNT2_REG; - S3C24X0_REG8 res16[3]; + u8 FUNC_ADDR_REG; + u8 res1[3]; + u8 PWR_REG; + u8 res2[3]; + u8 EP_INT_REG; + u8 res3[15]; + u8 USB_INT_REG; + u8 res4[3]; + u8 EP_INT_EN_REG; + u8 res5[15]; + u8 USB_INT_EN_REG; + u8 res6[3]; + u8 FRAME_NUM1_REG; + u8 res7[3]; + u8 FRAME_NUM2_REG; + u8 res8[3]; + u8 INDEX_REG; + u8 res9[7]; + u8 MAXP_REG; + u8 res10[7]; + u8 EP0_CSR_IN_CSR1_REG; + u8 res11[3]; + u8 IN_CSR2_REG; + u8 res12[3]; + u8 OUT_CSR1_REG; + u8 res13[7]; + u8 OUT_CSR2_REG; + u8 res14[3]; + u8 OUT_FIFO_CNT1_REG; + u8 res15[3]; + u8 OUT_FIFO_CNT2_REG; + u8 res16[3]; #endif /* __BIG_ENDIAN */ struct s3c24x0_usb_dev_fifos fifo[5]; struct s3c24x0_usb_dev_dmas dma[5]; @@ -323,45 +319,45 @@ struct s3c24x0_usb_device { /* WATCH DOG TIMER (see manual chapter 18) */ struct s3c24x0_watchdog { - S3C24X0_REG32 WTCON; - S3C24X0_REG32 WTDAT; - S3C24X0_REG32 WTCNT; + u32 WTCON; + u32 WTDAT; + u32 WTCNT; }; /* IIC (see manual chapter 20) */ struct s3c24x0_i2c { - S3C24X0_REG32 IICCON; - S3C24X0_REG32 IICSTAT; - S3C24X0_REG32 IICADD; - S3C24X0_REG32 IICDS; + u32 IICCON; + u32 IICSTAT; + u32 IICADD; + u32 IICDS; }; /* IIS (see manual chapter 21) */ struct s3c24x0_i2s { #ifdef __BIG_ENDIAN - S3C24X0_REG16 res1; - S3C24X0_REG16 IISCON; - S3C24X0_REG16 res2; - S3C24X0_REG16 IISMOD; - S3C24X0_REG16 res3; - S3C24X0_REG16 IISPSR; - S3C24X0_REG16 res4; - S3C24X0_REG16 IISFCON; - S3C24X0_REG16 res5; - S3C24X0_REG16 IISFIFO; + u16 res1; + u16 IISCON; + u16 res2; + u16 IISMOD; + u16 res3; + u16 IISPSR; + u16 res4; + u16 IISFCON; + u16 res5; + u16 IISFIFO; #else /* little endian */ - S3C24X0_REG16 IISCON; - S3C24X0_REG16 res1; - S3C24X0_REG16 IISMOD; - S3C24X0_REG16 res2; - S3C24X0_REG16 IISPSR; - S3C24X0_REG16 res3; - S3C24X0_REG16 IISFCON; - S3C24X0_REG16 res4; - S3C24X0_REG16 IISFIFO; - S3C24X0_REG16 res5; + u16 IISCON; + u16 res1; + u16 IISMOD; + u16 res2; + u16 IISPSR; + u16 res3; + u16 IISFCON; + u16 res4; + u16 IISFIFO; + u16 res5; #endif }; @@ -369,87 +365,87 @@ struct s3c24x0_i2s { /* I/O PORT (see manual chapter 9) */ struct s3c24x0_gpio { #ifdef CONFIG_S3C2400 - S3C24X0_REG32 PACON; - S3C24X0_REG32 PADAT; + u32 PACON; + u32 PADAT; - S3C24X0_REG32 PBCON; - S3C24X0_REG32 PBDAT; - S3C24X0_REG32 PBUP; + u32 PBCON; + u32 PBDAT; + u32 PBUP; - S3C24X0_REG32 PCCON; - S3C24X0_REG32 PCDAT; - S3C24X0_REG32 PCUP; + u32 PCCON; + u32 PCDAT; + u32 PCUP; - S3C24X0_REG32 PDCON; - S3C24X0_REG32 PDDAT; - S3C24X0_REG32 PDUP; + u32 PDCON; + u32 PDDAT; + u32 PDUP; - S3C24X0_REG32 PECON; - S3C24X0_REG32 PEDAT; - S3C24X0_REG32 PEUP; + u32 PECON; + u32 PEDAT; + u32 PEUP; - S3C24X0_REG32 PFCON; - S3C24X0_REG32 PFDAT; - S3C24X0_REG32 PFUP; + u32 PFCON; + u32 PFDAT; + u32 PFUP; - S3C24X0_REG32 PGCON; - S3C24X0_REG32 PGDAT; - S3C24X0_REG32 PGUP; + u32 PGCON; + u32 PGDAT; + u32 PGUP; - S3C24X0_REG32 OPENCR; + u32 OPENCR; - S3C24X0_REG32 MISCCR; - S3C24X0_REG32 EXTINT; + u32 MISCCR; + u32 EXTINT; #endif #ifdef CONFIG_S3C2410 - S3C24X0_REG32 GPACON; - S3C24X0_REG32 GPADAT; - S3C24X0_REG32 res1[2]; - S3C24X0_REG32 GPBCON; - S3C24X0_REG32 GPBDAT; - S3C24X0_REG32 GPBUP; - S3C24X0_REG32 res2; - S3C24X0_REG32 GPCCON; - S3C24X0_REG32 GPCDAT; - S3C24X0_REG32 GPCUP; - S3C24X0_REG32 res3; - S3C24X0_REG32 GPDCON; - S3C24X0_REG32 GPDDAT; - S3C24X0_REG32 GPDUP; - S3C24X0_REG32 res4; - S3C24X0_REG32 GPECON; - S3C24X0_REG32 GPEDAT; - S3C24X0_REG32 GPEUP; - S3C24X0_REG32 res5; - S3C24X0_REG32 GPFCON; - S3C24X0_REG32 GPFDAT; - S3C24X0_REG32 GPFUP; - S3C24X0_REG32 res6; - S3C24X0_REG32 GPGCON; - S3C24X0_REG32 GPGDAT; - S3C24X0_REG32 GPGUP; - S3C24X0_REG32 res7; - S3C24X0_REG32 GPHCON; - S3C24X0_REG32 GPHDAT; - S3C24X0_REG32 GPHUP; - S3C24X0_REG32 res8; - - S3C24X0_REG32 MISCCR; - S3C24X0_REG32 DCLKCON; - S3C24X0_REG32 EXTINT0; - S3C24X0_REG32 EXTINT1; - S3C24X0_REG32 EXTINT2; - S3C24X0_REG32 EINTFLT0; - S3C24X0_REG32 EINTFLT1; - S3C24X0_REG32 EINTFLT2; - S3C24X0_REG32 EINTFLT3; - S3C24X0_REG32 EINTMASK; - S3C24X0_REG32 EINTPEND; - S3C24X0_REG32 GSTATUS0; - S3C24X0_REG32 GSTATUS1; - S3C24X0_REG32 GSTATUS2; - S3C24X0_REG32 GSTATUS3; - S3C24X0_REG32 GSTATUS4; + u32 GPACON; + u32 GPADAT; + u32 res1[2]; + u32 GPBCON; + u32 GPBDAT; + u32 GPBUP; + u32 res2; + u32 GPCCON; + u32 GPCDAT; + u32 GPCUP; + u32 res3; + u32 GPDCON; + u32 GPDDAT; + u32 GPDUP; + u32 res4; + u32 GPECON; + u32 GPEDAT; + u32 GPEUP; + u32 res5; + u32 GPFCON; + u32 GPFDAT; + u32 GPFUP; + u32 res6; + u32 GPGCON; + u32 GPGDAT; + u32 GPGUP; + u32 res7; + u32 GPHCON; + u32 GPHDAT; + u32 GPHUP; + u32 res8; + + u32 MISCCR; + u32 DCLKCON; + u32 EXTINT0; + u32 EXTINT1; + u32 EXTINT2; + u32 EINTFLT0; + u32 EINTFLT1; + u32 EINTFLT2; + u32 EINTFLT3; + u32 EINTMASK; + u32 EINTPEND; + u32 GSTATUS0; + u32 GSTATUS1; + u32 GSTATUS2; + u32 GSTATUS3; + u32 GSTATUS4; #endif }; @@ -457,112 +453,112 @@ struct s3c24x0_gpio { /* RTC (see manual chapter 17) */ struct s3c24x0_rtc { #ifdef __BIG_ENDIAN - S3C24X0_REG8 res1[67]; - S3C24X0_REG8 RTCCON; - S3C24X0_REG8 res2[3]; - S3C24X0_REG8 TICNT; - S3C24X0_REG8 res3[11]; - S3C24X0_REG8 RTCALM; - S3C24X0_REG8 res4[3]; - S3C24X0_REG8 ALMSEC; - S3C24X0_REG8 res5[3]; - S3C24X0_REG8 ALMMIN; - S3C24X0_REG8 res6[3]; - S3C24X0_REG8 ALMHOUR; - S3C24X0_REG8 res7[3]; - S3C24X0_REG8 ALMDATE; - S3C24X0_REG8 res8[3]; - S3C24X0_REG8 ALMMON; - S3C24X0_REG8 res9[3]; - S3C24X0_REG8 ALMYEAR; - S3C24X0_REG8 res10[3]; - S3C24X0_REG8 RTCRST; - S3C24X0_REG8 res11[3]; - S3C24X0_REG8 BCDSEC; - S3C24X0_REG8 res12[3]; - S3C24X0_REG8 BCDMIN; - S3C24X0_REG8 res13[3]; - S3C24X0_REG8 BCDHOUR; - S3C24X0_REG8 res14[3]; - S3C24X0_REG8 BCDDATE; - S3C24X0_REG8 res15[3]; - S3C24X0_REG8 BCDDAY; - S3C24X0_REG8 res16[3]; - S3C24X0_REG8 BCDMON; - S3C24X0_REG8 res17[3]; - S3C24X0_REG8 BCDYEAR; + u8 res1[67]; + u8 RTCCON; + u8 res2[3]; + u8 TICNT; + u8 res3[11]; + u8 RTCALM; + u8 res4[3]; + u8 ALMSEC; + u8 res5[3]; + u8 ALMMIN; + u8 res6[3]; + u8 ALMHOUR; + u8 res7[3]; + u8 ALMDATE; + u8 res8[3]; + u8 ALMMON; + u8 res9[3]; + u8 ALMYEAR; + u8 res10[3]; + u8 RTCRST; + u8 res11[3]; + u8 BCDSEC; + u8 res12[3]; + u8 BCDMIN; + u8 res13[3]; + u8 BCDHOUR; + u8 res14[3]; + u8 BCDDATE; + u8 res15[3]; + u8 BCDDAY; + u8 res16[3]; + u8 BCDMON; + u8 res17[3]; + u8 BCDYEAR; #else /* little endian */ - S3C24X0_REG8 res0[64]; - S3C24X0_REG8 RTCCON; - S3C24X0_REG8 res1[3]; - S3C24X0_REG8 TICNT; - S3C24X0_REG8 res2[11]; - S3C24X0_REG8 RTCALM; - S3C24X0_REG8 res3[3]; - S3C24X0_REG8 ALMSEC; - S3C24X0_REG8 res4[3]; - S3C24X0_REG8 ALMMIN; - S3C24X0_REG8 res5[3]; - S3C24X0_REG8 ALMHOUR; - S3C24X0_REG8 res6[3]; - S3C24X0_REG8 ALMDATE; - S3C24X0_REG8 res7[3]; - S3C24X0_REG8 ALMMON; - S3C24X0_REG8 res8[3]; - S3C24X0_REG8 ALMYEAR; - S3C24X0_REG8 res9[3]; - S3C24X0_REG8 RTCRST; - S3C24X0_REG8 res10[3]; - S3C24X0_REG8 BCDSEC; - S3C24X0_REG8 res11[3]; - S3C24X0_REG8 BCDMIN; - S3C24X0_REG8 res12[3]; - S3C24X0_REG8 BCDHOUR; - S3C24X0_REG8 res13[3]; - S3C24X0_REG8 BCDDATE; - S3C24X0_REG8 res14[3]; - S3C24X0_REG8 BCDDAY; - S3C24X0_REG8 res15[3]; - S3C24X0_REG8 BCDMON; - S3C24X0_REG8 res16[3]; - S3C24X0_REG8 BCDYEAR; - S3C24X0_REG8 res17[3]; + u8 res0[64]; + u8 RTCCON; + u8 res1[3]; + u8 TICNT; + u8 res2[11]; + u8 RTCALM; + u8 res3[3]; + u8 ALMSEC; + u8 res4[3]; + u8 ALMMIN; + u8 res5[3]; + u8 ALMHOUR; + u8 res6[3]; + u8 ALMDATE; + u8 res7[3]; + u8 ALMMON; + u8 res8[3]; + u8 ALMYEAR; + u8 res9[3]; + u8 RTCRST; + u8 res10[3]; + u8 BCDSEC; + u8 res11[3]; + u8 BCDMIN; + u8 res12[3]; + u8 BCDHOUR; + u8 res13[3]; + u8 BCDDATE; + u8 res14[3]; + u8 BCDDAY; + u8 res15[3]; + u8 BCDMON; + u8 res16[3]; + u8 BCDYEAR; + u8 res17[3]; #endif }; /* ADC (see manual chapter 16) */ struct s3c2400_adc { - S3C24X0_REG32 ADCCON; - S3C24X0_REG32 ADCDAT; + u32 ADCCON; + u32 ADCDAT; }; /* ADC (see manual chapter 16) */ struct s3c2410_adc { - S3C24X0_REG32 ADCCON; - S3C24X0_REG32 ADCTSC; - S3C24X0_REG32 ADCDLY; - S3C24X0_REG32 ADCDAT0; - S3C24X0_REG32 ADCDAT1; + u32 ADCCON; + u32 ADCTSC; + u32 ADCDLY; + u32 ADCDAT0; + u32 ADCDAT1; }; /* SPI (see manual chapter 22) */ struct s3c24x0_spi_channel { - S3C24X0_REG8 SPCON; - S3C24X0_REG8 res1[3]; - S3C24X0_REG8 SPSTA; - S3C24X0_REG8 res2[3]; - S3C24X0_REG8 SPPIN; - S3C24X0_REG8 res3[3]; - S3C24X0_REG8 SPPRE; - S3C24X0_REG8 res4[3]; - S3C24X0_REG8 SPTDAT; - S3C24X0_REG8 res5[3]; - S3C24X0_REG8 SPRDAT; - S3C24X0_REG8 res6[3]; - S3C24X0_REG8 res7[16]; + u8 SPCON; + u8 res1[3]; + u8 SPSTA; + u8 res2[3]; + u8 SPPIN; + u8 res3[3]; + u8 SPPRE; + u8 res4[3]; + u8 SPTDAT; + u8 res5[3]; + u8 SPRDAT; + u8 res6[3]; + u8 res7[16]; }; struct s3c24x0_spi { @@ -573,84 +569,84 @@ struct s3c24x0_spi { /* MMC INTERFACE (see S3C2400 manual chapter 19) */ struct s3c2400_mmc { #ifdef __BIG_ENDIAN - S3C24X0_REG8 res1[3]; - S3C24X0_REG8 MMCON; - S3C24X0_REG8 res2[3]; - S3C24X0_REG8 MMCRR; - S3C24X0_REG8 res3[3]; - S3C24X0_REG8 MMFCON; - S3C24X0_REG8 res4[3]; - S3C24X0_REG8 MMSTA; - S3C24X0_REG16 res5; - S3C24X0_REG16 MMFSTA; - S3C24X0_REG8 res6[3]; - S3C24X0_REG8 MMPRE; - S3C24X0_REG16 res7; - S3C24X0_REG16 MMLEN; - S3C24X0_REG8 res8[3]; - S3C24X0_REG8 MMCR7; - S3C24X0_REG32 MMRSP[4]; - S3C24X0_REG8 res9[3]; - S3C24X0_REG8 MMCMD0; - S3C24X0_REG32 MMCMD1; - S3C24X0_REG16 res10; - S3C24X0_REG16 MMCR16; - S3C24X0_REG8 res11[3]; - S3C24X0_REG8 MMDAT; + u8 res1[3]; + u8 MMCON; + u8 res2[3]; + u8 MMCRR; + u8 res3[3]; + u8 MMFCON; + u8 res4[3]; + u8 MMSTA; + u16 res5; + u16 MMFSTA; + u8 res6[3]; + u8 MMPRE; + u16 res7; + u16 MMLEN; + u8 res8[3]; + u8 MMCR7; + u32 MMRSP[4]; + u8 res9[3]; + u8 MMCMD0; + u32 MMCMD1; + u16 res10; + u16 MMCR16; + u8 res11[3]; + u8 MMDAT; #else - S3C24X0_REG8 MMCON; - S3C24X0_REG8 res1[3]; - S3C24X0_REG8 MMCRR; - S3C24X0_REG8 res2[3]; - S3C24X0_REG8 MMFCON; - S3C24X0_REG8 res3[3]; - S3C24X0_REG8 MMSTA; - S3C24X0_REG8 res4[3]; - S3C24X0_REG16 MMFSTA; - S3C24X0_REG16 res5; - S3C24X0_REG8 MMPRE; - S3C24X0_REG8 res6[3]; - S3C24X0_REG16 MMLEN; - S3C24X0_REG16 res7; - S3C24X0_REG8 MMCR7; - S3C24X0_REG8 res8[3]; - S3C24X0_REG32 MMRSP[4]; - S3C24X0_REG8 MMCMD0; - S3C24X0_REG8 res9[3]; - S3C24X0_REG32 MMCMD1; - S3C24X0_REG16 MMCR16; - S3C24X0_REG16 res10; - S3C24X0_REG8 MMDAT; - S3C24X0_REG8 res11[3]; + u8 MMCON; + u8 res1[3]; + u8 MMCRR; + u8 res2[3]; + u8 MMFCON; + u8 res3[3]; + u8 MMSTA; + u8 res4[3]; + u16 MMFSTA; + u16 res5; + u8 MMPRE; + u8 res6[3]; + u16 MMLEN; + u16 res7; + u8 MMCR7; + u8 res8[3]; + u32 MMRSP[4]; + u8 MMCMD0; + u8 res9[3]; + u32 MMCMD1; + u16 MMCR16; + u16 res10; + u8 MMDAT; + u8 res11[3]; #endif }; /* SD INTERFACE (see S3C2410 manual chapter 19) */ struct s3c2410_sdi { - S3C24X0_REG32 SDICON; - S3C24X0_REG32 SDIPRE; - S3C24X0_REG32 SDICARG; - S3C24X0_REG32 SDICCON; - S3C24X0_REG32 SDICSTA; - S3C24X0_REG32 SDIRSP0; - S3C24X0_REG32 SDIRSP1; - S3C24X0_REG32 SDIRSP2; - S3C24X0_REG32 SDIRSP3; - S3C24X0_REG32 SDIDTIMER; - S3C24X0_REG32 SDIBSIZE; - S3C24X0_REG32 SDIDCON; - S3C24X0_REG32 SDIDCNT; - S3C24X0_REG32 SDIDSTA; - S3C24X0_REG32 SDIFSTA; + u32 SDICON; + u32 SDIPRE; + u32 SDICARG; + u32 SDICCON; + u32 SDICSTA; + u32 SDIRSP0; + u32 SDIRSP1; + u32 SDIRSP2; + u32 SDIRSP3; + u32 SDIDTIMER; + u32 SDIBSIZE; + u32 SDIDCON; + u32 SDIDCNT; + u32 SDIDSTA; + u32 SDIFSTA; #ifdef __BIG_ENDIAN - S3C24X0_REG8 res[3]; - S3C24X0_REG8 SDIDAT; + u8 res[3]; + u8 SDIDAT; #else - S3C24X0_REG8 SDIDAT; - S3C24X0_REG8 res[3]; + u8 SDIDAT; + u8 res[3]; #endif - S3C24X0_REG32 SDIIMSK; + u32 SDIIMSK; }; #endif /*__S3C24X0_H__*/ -- cgit v1.2.3 From ac67804fbb2d82a19170066c02af7053d474ce8d Mon Sep 17 00:00:00 2001 From: "kevin.morfitt@fearnside-systems.co.uk" Date: Tue, 17 Nov 2009 18:30:34 +0900 Subject: Add a unified s3c24x0 header file This patch adds a unified s3c24x0 cpu header file that selects the header file for the specific s3c24x0 cpu from the SOC and CPU configs defined in board config file. This removes the current chain of s3c24-type #ifdef's from the s3c24x0 code. Signed-off-by: Kevin Morfitt Signed-off-by: Minkyu Kang --- board/mpl/vcma9/vcma9.c | 2 +- board/mpl/vcma9/vcma9.h | 2 +- board/samsung/smdk2400/smdk2400.c | 2 +- board/samsung/smdk2410/smdk2410.c | 2 +- board/sbc2410x/sbc2410x.c | 2 +- board/trab/cmd_trab.c | 2 +- board/trab/rs485.c | 2 +- board/trab/rs485.h | 2 +- board/trab/trab.c | 2 +- board/trab/trab_fkt.c | 2 +- board/trab/tsc2000.c | 2 +- board/trab/vfd.c | 2 +- cpu/arm920t/s3c24x0/interrupts.c | 6 +----- cpu/arm920t/s3c24x0/speed.c | 13 +++---------- cpu/arm920t/s3c24x0/timer.c | 15 +++------------ cpu/arm920t/s3c24x0/usb.c | 17 +++++++---------- cpu/arm920t/s3c24x0/usb_ohci.c | 11 +++-------- cpu/arm920t/start.S | 4 ++-- drivers/i2c/s3c24x0_i2c.c | 6 +----- drivers/mtd/nand/s3c2410_nand.c | 2 +- drivers/rtc/s3c24x0_rtc.c | 6 +----- drivers/serial/serial_s3c24x0.c | 6 +----- drivers/usb/host/ohci-hcd.c | 3 +-- include/asm-arm/arch-s3c24x0/s3c24x0_cpu.h | 27 +++++++++++++++++++++++++++ include/common.h | 5 +++-- include/configs/VCMA9.h | 7 ++++--- include/configs/sbc2410x.h | 7 ++++--- include/configs/smdk2400.h | 7 ++++--- include/configs/smdk2410.h | 7 ++++--- include/configs/trab.h | 9 +++++---- 30 files changed, 87 insertions(+), 95 deletions(-) create mode 100644 include/asm-arm/arch-s3c24x0/s3c24x0_cpu.h (limited to 'board') diff --git a/board/mpl/vcma9/vcma9.c b/board/mpl/vcma9/vcma9.c index f3bd28845..1835677a8 100644 --- a/board/mpl/vcma9/vcma9.c +++ b/board/mpl/vcma9/vcma9.c @@ -27,7 +27,7 @@ #include #include -#include +#include #include #include diff --git a/board/mpl/vcma9/vcma9.h b/board/mpl/vcma9/vcma9.h index 2c4305c6a..94fd2faf3 100644 --- a/board/mpl/vcma9/vcma9.h +++ b/board/mpl/vcma9/vcma9.h @@ -25,7 +25,7 @@ * Global routines used for VCMA9 *****************************************************************************/ -#include +#include extern int mem_test(unsigned long start, unsigned long ramsize,int mode); diff --git a/board/samsung/smdk2400/smdk2400.c b/board/samsung/smdk2400/smdk2400.c index be0c70ad0..1294d3f1b 100644 --- a/board/samsung/smdk2400/smdk2400.c +++ b/board/samsung/smdk2400/smdk2400.c @@ -27,7 +27,7 @@ #include #include -#include +#include DECLARE_GLOBAL_DATA_PTR; diff --git a/board/samsung/smdk2410/smdk2410.c b/board/samsung/smdk2410/smdk2410.c index a8cf2874a..5d1a8bb0c 100644 --- a/board/samsung/smdk2410/smdk2410.c +++ b/board/samsung/smdk2410/smdk2410.c @@ -27,7 +27,7 @@ #include #include -#include +#include DECLARE_GLOBAL_DATA_PTR; diff --git a/board/sbc2410x/sbc2410x.c b/board/sbc2410x/sbc2410x.c index 6768c028c..3a936778e 100644 --- a/board/sbc2410x/sbc2410x.c +++ b/board/sbc2410x/sbc2410x.c @@ -30,7 +30,7 @@ #include #include -#include +#include #if defined(CONFIG_CMD_NAND) #include diff --git a/board/trab/cmd_trab.c b/board/trab/cmd_trab.c index a01ffcc02..472d7d81e 100644 --- a/board/trab/cmd_trab.c +++ b/board/trab/cmd_trab.c @@ -25,7 +25,7 @@ #include #include -#include +#include #include /* diff --git a/board/trab/rs485.c b/board/trab/rs485.c index f402c5990..ad0c13665 100644 --- a/board/trab/rs485.c +++ b/board/trab/rs485.c @@ -22,7 +22,7 @@ */ #include -#include +#include #include "rs485.h" static void rs485_setbrg (void); diff --git a/board/trab/rs485.h b/board/trab/rs485.h index 4a2d83f0b..16d69bbd5 100644 --- a/board/trab/rs485.h +++ b/board/trab/rs485.h @@ -24,7 +24,7 @@ #ifndef _RS485_H_ #define _RS485_H_ -#include +#include int rs485_init (void); int rs485_getc (void); diff --git a/board/trab/trab.c b/board/trab/trab.c index f8836ff37..71fd22c15 100644 --- a/board/trab/trab.c +++ b/board/trab/trab.c @@ -26,7 +26,7 @@ #include #include #include -#include +#include #include DECLARE_GLOBAL_DATA_PTR; diff --git a/board/trab/trab_fkt.c b/board/trab/trab_fkt.c index 940e12f25..2df9a0440 100644 --- a/board/trab/trab_fkt.c +++ b/board/trab/trab_fkt.c @@ -26,7 +26,7 @@ #include #include #include -#include +#include #include "tsc2000.h" #include "rs485.h" diff --git a/board/trab/tsc2000.c b/board/trab/tsc2000.c index f757202de..5890624f0 100644 --- a/board/trab/tsc2000.c +++ b/board/trab/tsc2000.c @@ -26,7 +26,7 @@ */ #include -#include +#include #include #include #include "tsc2000.h" diff --git a/board/trab/vfd.c b/board/trab/vfd.c index 8d9a05716..b7eb8cce0 100644 --- a/board/trab/vfd.c +++ b/board/trab/vfd.c @@ -37,7 +37,7 @@ #include #include #include -#include +#include DECLARE_GLOBAL_DATA_PTR; diff --git a/cpu/arm920t/s3c24x0/interrupts.c b/cpu/arm920t/s3c24x0/interrupts.c index 3e8422e14..879fda66a 100644 --- a/cpu/arm920t/s3c24x0/interrupts.c +++ b/cpu/arm920t/s3c24x0/interrupts.c @@ -31,11 +31,7 @@ #include -#if defined(CONFIG_S3C2400) -#include -#elif defined(CONFIG_S3C2410) -#include -#endif +#include #include void do_irq (struct pt_regs *pt_regs) diff --git a/cpu/arm920t/s3c24x0/speed.c b/cpu/arm920t/s3c24x0/speed.c index 85c73a3ee..b13283a79 100644 --- a/cpu/arm920t/s3c24x0/speed.c +++ b/cpu/arm920t/s3c24x0/speed.c @@ -30,15 +30,10 @@ */ #include -#if defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || defined (CONFIG_TRAB) +#ifdef CONFIG_S3C24X0 #include - -#if defined(CONFIG_S3C2400) -#include -#elif defined(CONFIG_S3C2410) -#include -#endif +#include #define MPLL 0 #define UPLL 1 @@ -100,6 +95,4 @@ ulong get_UCLK(void) return get_PLLCLK(UPLL); } -#endif /* defined(CONFIG_S3C2400) || - defined (CONFIG_S3C2410) || - defined (CONFIG_TRAB) */ +#endif /* CONFIG_S3C24X0 */ diff --git a/cpu/arm920t/s3c24x0/timer.c b/cpu/arm920t/s3c24x0/timer.c index 2667da6e8..cd06f6b58 100644 --- a/cpu/arm920t/s3c24x0/timer.c +++ b/cpu/arm920t/s3c24x0/timer.c @@ -30,17 +30,10 @@ */ #include -#if defined(CONFIG_S3C2400) || \ - defined(CONFIG_S3C2410) || \ - defined(CONFIG_TRAB) +#ifdef CONFIG_S3C24X0 #include - -#if defined(CONFIG_S3C2400) -#include -#elif defined(CONFIG_S3C2410) -#include -#endif +#include int timer_load_val = 0; static ulong timer_clk; @@ -225,6 +218,4 @@ void reset_cpu(ulong ignored) /*NOTREACHED*/ } -#endif /* defined(CONFIG_S3C2400) || - defined (CONFIG_S3C2410) || - defined (CONFIG_TRAB) */ +#endif /* CONFIG_S3C24X0 */ diff --git a/cpu/arm920t/s3c24x0/usb.c b/cpu/arm920t/s3c24x0/usb.c index 5e19cda8f..e468ed08f 100644 --- a/cpu/arm920t/s3c24x0/usb.c +++ b/cpu/arm920t/s3c24x0/usb.c @@ -23,15 +23,11 @@ #include -#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT) -# if defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410) - -#if defined(CONFIG_S3C2400) -# include -#elif defined(CONFIG_S3C2410) -# include -#endif +#if defined(CONFIG_USB_OHCI_NEW) && \ + defined(CONFIG_SYS_USB_OHCI_CPU_INIT) && \ + defined(CONFIG_S3C24X0) +#include #include int usb_cpu_init(void) @@ -70,5 +66,6 @@ int usb_cpu_init_fail(void) return 0; } -# endif /* defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410) */ -#endif /* defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT) */ +#endif /* defined(CONFIG_USB_OHCI_NEW) && \ + defined(CONFIG_SYS_USB_OHCI_CPU_INIT) && \ + defined(CONFIG_S3C24X0) */ diff --git a/cpu/arm920t/s3c24x0/usb_ohci.c b/cpu/arm920t/s3c24x0/usb_ohci.c index 41119922e..5aa8d64a5 100644 --- a/cpu/arm920t/s3c24x0/usb_ohci.c +++ b/cpu/arm920t/s3c24x0/usb_ohci.c @@ -36,14 +36,9 @@ #include /* #include no PCI on the S3C24X0 */ -#ifdef CONFIG_USB_OHCI - -#if defined(CONFIG_S3C2400) -#include -#elif defined(CONFIG_S3C2410) -#include -#endif +#if defined(CONFIG_USB_OHCI) && defined(CONFIG_S3C24X0) +#include #include #include #include @@ -1757,4 +1752,4 @@ int usb_lowlevel_stop(void) return 0; } -#endif /* CONFIG_USB_OHCI */ +#endif /* defined(CONFIG_USB_OHCI) && defined(CONFIG_S3C24X0) */ diff --git a/cpu/arm920t/start.S b/cpu/arm920t/start.S index 114427a16..779f192e5 100644 --- a/cpu/arm920t/start.S +++ b/cpu/arm920t/start.S @@ -131,7 +131,7 @@ copyex: bne copyex #endif -#if defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410) +#ifdef CONFIG_S3C24X0 /* turn off the watchdog */ # if defined(CONFIG_S3C2400) @@ -166,7 +166,7 @@ copyex: ldr r0, =CLKDIVN mov r1, #3 str r1, [r0] -#endif /* CONFIG_S3C2400 || CONFIG_S3C2410 */ +#endif /* CONFIG_S3C24X0 */ /* * we do sys-critical inits only at reboot, diff --git a/drivers/i2c/s3c24x0_i2c.c b/drivers/i2c/s3c24x0_i2c.c index 8fecc6e3f..c8371cf73 100644 --- a/drivers/i2c/s3c24x0_i2c.c +++ b/drivers/i2c/s3c24x0_i2c.c @@ -27,11 +27,7 @@ */ #include -#if defined(CONFIG_S3C2400) -#include -#elif defined(CONFIG_S3C2410) -#include -#endif +#include #include #include diff --git a/drivers/mtd/nand/s3c2410_nand.c b/drivers/mtd/nand/s3c2410_nand.c index 2f89b8c96..a27d47e5f 100644 --- a/drivers/mtd/nand/s3c2410_nand.c +++ b/drivers/mtd/nand/s3c2410_nand.c @@ -21,7 +21,7 @@ #include #include -#include +#include #include #define S3C2410_NFCONF_EN (1<<15) diff --git a/drivers/rtc/s3c24x0_rtc.c b/drivers/rtc/s3c24x0_rtc.c index 2d78f93ae..04de5ca54 100644 --- a/drivers/rtc/s3c24x0_rtc.c +++ b/drivers/rtc/s3c24x0_rtc.c @@ -30,11 +30,7 @@ #if (defined(CONFIG_CMD_DATE)) -#if defined(CONFIG_S3C2400) -#include -#elif defined(CONFIG_S3C2410) -#include -#endif +#include #include #include diff --git a/drivers/serial/serial_s3c24x0.c b/drivers/serial/serial_s3c24x0.c index 914d07cda..5dd4dd816 100644 --- a/drivers/serial/serial_s3c24x0.c +++ b/drivers/serial/serial_s3c24x0.c @@ -19,11 +19,7 @@ */ #include -#if defined(CONFIG_S3C2400) || defined(CONFIG_TRAB) -#include -#elif defined(CONFIG_S3C2410) -#include -#endif +#include DECLARE_GLOBAL_DATA_PTR; diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 67d478f87..b03a60044 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -65,8 +65,7 @@ #endif #if defined(CONFIG_ARM920T) || \ - defined(CONFIG_S3C2400) || \ - defined(CONFIG_S3C2410) || \ + defined(CONFIG_S3C24X0) || \ defined(CONFIG_S3C6400) || \ defined(CONFIG_440EP) || \ defined(CONFIG_PCI_OHCI) || \ diff --git a/include/asm-arm/arch-s3c24x0/s3c24x0_cpu.h b/include/asm-arm/arch-s3c24x0/s3c24x0_cpu.h new file mode 100644 index 000000000..c37d4a108 --- /dev/null +++ b/include/asm-arm/arch-s3c24x0/s3c24x0_cpu.h @@ -0,0 +1,27 @@ +/* + * (C) Copyright 2009 + * Kevin Morfitt, Fearnside Systems Ltd, + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifdef CONFIG_S3C2400 + #include +#elif defined CONFIG_S3C2410 + #include +#else + #error Please define the s3c24x0 cpu type +#endif diff --git a/include/common.h b/include/common.h index f7c93bf5a..8ee80c139 100644 --- a/include/common.h +++ b/include/common.h @@ -495,8 +495,9 @@ int prt_mpc8220_clks (void); ulong get_OPB_freq (void); ulong get_PCI_freq (void); #endif -#if defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410) || \ - defined(CONFIG_LH7A40X) || defined(CONFIG_S3C6400) +#if defined(CONFIG_S3C24X0) || \ + defined(CONFIG_LH7A40X) || \ + defined(CONFIG_S3C6400) ulong get_FCLK (void); ulong get_HCLK (void); ulong get_PCLK (void); diff --git a/include/configs/VCMA9.h b/include/configs/VCMA9.h index 618b7f0a7..ebc81c400 100644 --- a/include/configs/VCMA9.h +++ b/include/configs/VCMA9.h @@ -33,9 +33,10 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ -#define CONFIG_S3C2410 1 /* in a SAMSUNG S3C2410 SoC */ -#define CONFIG_VCMA9 1 /* on a MPL VCMA9 Board */ +#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ +#define CONFIG_S3C24X0 1 /* in a SAMSUNG S3C24x0-type SoC */ +#define CONFIG_S3C2410 1 /* specifically a SAMSUNG S3C2410 SoC */ +#define CONFIG_VCMA9 1 /* on a MPL VCMA9 Board */ /* input clock of PLL */ #define CONFIG_SYS_CLK_FREQ 12000000/* VCMA9 has 12MHz input clock */ diff --git a/include/configs/sbc2410x.h b/include/configs/sbc2410x.h index e6886cf7f..025ad0953 100644 --- a/include/configs/sbc2410x.h +++ b/include/configs/sbc2410x.h @@ -43,9 +43,10 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ -#define CONFIG_S3C2410 1 /* in a SAMSUNG S3C2410 SoC */ -#define CONFIG_SBC2410X 1 /* on a friendly-arm SBC-2410X Board */ +#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ +#define CONFIG_S3C24X0 1 /* in a SAMSUNG S3C24x0-type SoC */ +#define CONFIG_S3C2410 1 /* specifically a SAMSUNG S3C2410 SoC */ +#define CONFIG_SBC2410X 1 /* on a friendly-arm SBC-2410X Board */ /* input clock of PLL */ #define CONFIG_SYS_CLK_FREQ 12000000/* the SBC2410X has 12MHz input clock */ diff --git a/include/configs/smdk2400.h b/include/configs/smdk2400.h index a1beb65d0..fd51219af 100644 --- a/include/configs/smdk2400.h +++ b/include/configs/smdk2400.h @@ -34,9 +34,10 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_ARM920T 1 /* This is an ARM920T core */ -#define CONFIG_S3C2400 1 /* in a SAMSUNG S3C2400 SoC */ -#define CONFIG_SMDK2400 1 /* on an SAMSUNG SMDK2400 Board */ +#define CONFIG_ARM920T 1 /* This is an ARM920T core */ +#define CONFIG_S3C24X0 1 /* in a SAMSUNG S3C24x0-type SoC */ +#define CONFIG_S3C2400 1 /* specifically a SAMSUNG S3C2400 SoC */ +#define CONFIG_SMDK2400 1 /* on an SAMSUNG SMDK2400 Board */ /* input clock of PLL */ #define CONFIG_SYS_CLK_FREQ 12000000 /* SMDK2400 has 12 MHz input clock */ diff --git a/include/configs/smdk2410.h b/include/configs/smdk2410.h index c57751bf9..f9d1e5518 100644 --- a/include/configs/smdk2410.h +++ b/include/configs/smdk2410.h @@ -33,9 +33,10 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ -#define CONFIG_S3C2410 1 /* in a SAMSUNG S3C2410 SoC */ -#define CONFIG_SMDK2410 1 /* on a SAMSUNG SMDK2410 Board */ +#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ +#define CONFIG_S3C24X0 1 /* in a SAMSUNG S3C24x0-type SoC */ +#define CONFIG_S3C2410 1 /* specifically a SAMSUNG S3C2410 SoC */ +#define CONFIG_SMDK2410 1 /* on a SAMSUNG SMDK2410 Board */ /* input clock of PLL */ #define CONFIG_SYS_CLK_FREQ 12000000/* the SMDK2410 has 12MHz input clock */ diff --git a/include/configs/trab.h b/include/configs/trab.h index 97f30cea7..9827195e8 100644 --- a/include/configs/trab.h +++ b/include/configs/trab.h @@ -40,10 +40,11 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_ARM920T 1 /* This is an arm920t CPU */ -#define CONFIG_S3C2400 1 /* in a SAMSUNG S3C2400 SoC */ -#define CONFIG_TRAB 1 /* on a TRAB Board */ -#undef CONFIG_TRAB_50MHZ /* run the CPU at 50 MHz */ +#define CONFIG_ARM920T 1 /* This is an arm920t CPU */ +#define CONFIG_S3C24X0 1 /* in a SAMSUNG S3C24x0-type SoC */ +#define CONFIG_S3C2400 1 /* specifically a SAMSUNG S3C2400 SoC */ +#define CONFIG_TRAB 1 /* on a TRAB Board */ +#undef CONFIG_TRAB_50MHZ /* run the CPU at 50 MHz */ /* automatic software updates (see board/trab/auto_update.c) */ #define CONFIG_AUTO_UPDATE 1 -- cgit v1.2.3 From c90b32739a50ca52d9b8d220ea6875ae994566ec Mon Sep 17 00:00:00 2001 From: Grazvydas Ignotas Date: Thu, 12 Nov 2009 11:46:07 +0200 Subject: OMAP3: pandora: fix booting without serial attached When the board is booted without serial cable attached (which is how most of them will be used) UART RX is left floating and sometimes picks noise, which interrupts countdown and enters U-Boot prompt instead of booting the kernel. Fix this by setting up internal pullup on UART RX pin. This does not prevent serial from working as the internal pullup is weak. Signed-off-by: Grazvydas Ignotas --- board/pandora/pandora.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'board') diff --git a/board/pandora/pandora.h b/board/pandora/pandora.h index 5bfa0f9e2..f0ad16b0a 100644 --- a/board/pandora/pandora.h +++ b/board/pandora/pandora.h @@ -219,7 +219,8 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(UART2_RX), (IEN | PTD | EN | M4)) /*GPIO_147,*/\ /*UART2_RX*/\ /*Serial Interface (Peripheral boot, Linux console, on AV connector)*/\ - MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0)) /*UART3_RX*/\ + /*RX pulled up to avoid noise when nothing is connected to serial port*/\ + MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTU | EN | M0)) /*UART3_RX*/\ MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0)) /*UART3_TX*/\ /*LEDs (Controlled by OMAP)*/\ MUX_VAL(CP(MMC1_DAT6), (IDIS | PTD | DIS | M4)) /*GPIO_128*/\ -- cgit v1.2.3 From ca8480d444bdcc1670e42a613c5a5e4e8366d2d9 Mon Sep 17 00:00:00 2001 From: Nick Thompson Date: Thu, 12 Nov 2009 11:03:23 -0500 Subject: TI Davinci: add a pin multiplexer configuration API Creates a method allowing pin settings to be logically grouped into data structure arrays and provides an API to configure the pinmux settings to enable the relevant pin functions. Signed-off-by: Nick Thompson --- board/davinci/common/misc.c | 48 ++++++++++++++++++++++++++++++++++++++++++++- board/davinci/common/misc.h | 12 ++++++++++++ 2 files changed, 59 insertions(+), 1 deletion(-) (limited to 'board') diff --git a/board/davinci/common/misc.c b/board/davinci/common/misc.c index ffdc20b93..9fab76fa5 100644 --- a/board/davinci/common/misc.c +++ b/board/davinci/common/misc.c @@ -1,6 +1,7 @@ /* * Miscelaneous DaVinci functions. * + * Copyright (C) 2009 Nick Thompson, GE Fanuc Ltd, * Copyright (C) 2007 Sergey Kubushyn * Copyright (C) 2008 Lyrtech * Copyright (C) 2004 Texas Instruments. @@ -27,7 +28,8 @@ #include #include #include - +#include +#include "misc.h" DECLARE_GLOBAL_DATA_PTR; @@ -109,3 +111,47 @@ void dv_configure_mac_address(uint8_t *rom_enetaddr) } #endif /* DAVINCI_EMAC */ + +/* + * Change the setting of a pin multiplexer field. + * + * Takes an array of pinmux settings similar to: + * + * struct pinmux_config uart_pins[] = { + * { &davinci_syscfg_regs->pinmux[8], 2, 7 }, + * { &davinci_syscfg_regs->pinmux[9], 2, 0 } + * }; + * + * Stepping through the array, each pinmux[n] register has the given value + * set in the pin mux field specified. + * + * The number of pins in the array must be passed (ARRAY_SIZE can provide + * this value conveniently). + * + * Returns 0 if all field numbers and values are in the correct range, + * else returns -1. + */ +int davinci_configure_pin_mux(const struct pinmux_config *pins, + const int n_pins) +{ + int i; + + /* check for invalid pinmux values */ + for (i = 0; i < n_pins; i++) { + if (pins[i].field >= PIN_MUX_NUM_FIELDS || + (pins[i].value & ~PIN_MUX_FIELD_MASK) != 0) + return -1; + } + + /* configure the pinmuxes */ + for (i = 0; i < n_pins; i++) { + const int offset = pins[i].field * PIN_MUX_FIELD_SIZE; + const unsigned int value = pins[i].value << offset; + const unsigned int mask = PIN_MUX_FIELD_MASK << offset; + const dv_reg *mux = pins[i].mux; + + writel(value | (readl(mux) & (~mask)), mux); + } + + return 0; +} diff --git a/board/davinci/common/misc.h b/board/davinci/common/misc.h index dc3cc4133..f6d8b1bda 100644 --- a/board/davinci/common/misc.h +++ b/board/davinci/common/misc.h @@ -22,8 +22,20 @@ #ifndef __MISC_H #define __MISC_H +/* pin muxer definitions */ +#define PIN_MUX_NUM_FIELDS 8 /* Per register */ +#define PIN_MUX_FIELD_SIZE 4 /* n in bits */ +#define PIN_MUX_FIELD_MASK ((1 << PIN_MUX_FIELD_SIZE) - 1) + +/* pin definition */ +struct pinmux_config { + dv_reg *mux; /* Address of mux register */ + unsigned char value; /* Value to set in field */ + unsigned char field; /* field number */ +}; int dvevm_read_mac_address(uint8_t *buf); void dv_configure_mac_address(uint8_t *rom_enetaddr); +int davinci_configure_pin_mux(const struct pinmux_config *pins, int n_pins); #endif /* __MISC_H */ -- cgit v1.2.3 From bdc9c6c7f77a9a63349ecb9f54b20ad34033a2ae Mon Sep 17 00:00:00 2001 From: Sekhar Nori Date: Thu, 12 Nov 2009 11:08:39 -0500 Subject: TI DA8xx: Add new directory for da830evm board Add new directory for da830evm board Provides initial support for TI OMAP-L137/DA830 SoC devices on a Spectrum Digital EVM board. See http://www.spectrumdigital.com/ Provides: Initial boot and configuration. Support for i2c. UART support (console). Signed-off-by: Nick Thompson --- board/davinci/da830evm/Makefile | 51 +++++++++++++++ board/davinci/da830evm/config.mk | 43 +++++++++++++ board/davinci/da830evm/da830evm.c | 127 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 221 insertions(+) create mode 100644 board/davinci/da830evm/Makefile create mode 100644 board/davinci/da830evm/config.mk create mode 100644 board/davinci/da830evm/da830evm.c (limited to 'board') diff --git a/board/davinci/da830evm/Makefile b/board/davinci/da830evm/Makefile new file mode 100644 index 000000000..02636fa77 --- /dev/null +++ b/board/davinci/da830evm/Makefile @@ -0,0 +1,51 @@ +# +# (C) Copyright 2000, 2001, 2002 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# Copyright (C) 2007 Sergey Kubushyn +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := da830evm.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak *~ .depend + +######################################################################### +# This is for $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/davinci/da830evm/config.mk b/board/davinci/da830evm/config.mk new file mode 100644 index 000000000..6da29a979 --- /dev/null +++ b/board/davinci/da830evm/config.mk @@ -0,0 +1,43 @@ +# +# (C) Copyright 2008, Texas Instruments, Inc. http://www.ti.com/ +# +# Copyright (C) 2007 Sergey Kubushyn +# +# (C) Copyright 2002 +# Gary Jennejohn, DENX Software Engineering, +# David Mueller, ELSOFT AG, +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# Texas Instruments DA8xx EVM board (ARM925EJS) cpu +# see http://www.ti.com/ for more information on Texas Instruments +# +# DA8xx EVM has 1 bank of 64 MB SDRAM (2 16Meg x16 chips). +# Physical Address: +# C000'0000 to C400'0000 +# +# Linux-Kernel is expected to be at C000'8000, entry C000'8000 +# (mem base + reserved) +# +# we load ourself to C108 '0000 + + +#Provide at least 16MB spacing between us and the Linux Kernel image +TEXT_BASE = 0xC1080000 diff --git a/board/davinci/da830evm/da830evm.c b/board/davinci/da830evm/da830evm.c new file mode 100644 index 000000000..bb8cc3c92 --- /dev/null +++ b/board/davinci/da830evm/da830evm.c @@ -0,0 +1,127 @@ +/* + * Copyright (C) 2009 Nick Thompson, GE Fanuc, Ltd. + * + * Base on code from TI. Original Notices follow: + * + * (C) Copyright 2008, Texas Instruments, Inc. http://www.ti.com/ + * + * Modified for DA8xx EVM. + * + * Copyright (C) 2007 Sergey Kubushyn + * + * Parts are shamelessly stolen from various TI sources, original copyright + * follows: + * ----------------------------------------------------------------- + * + * Copyright (C) 2004 Texas Instruments. + * + * ---------------------------------------------------------------------------- + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * ---------------------------------------------------------------------------- + */ + +#include +#include +#include +#include +#include "../common/misc.h" + +DECLARE_GLOBAL_DATA_PTR; + +#define pinmux &davinci_syscfg_regs->pinmux + +#ifdef CONFIG_SPI_FLASH +/* SPI0 pin muxer settings */ +const struct pinmux_config spi0_pins[] = { + { pinmux[7], 1, 3 }, + { pinmux[7], 1, 4 }, + { pinmux[7], 1, 5 }, + { pinmux[7], 1, 6 }, + { pinmux[7], 1, 7 } +}; +#endif + +/* UART pin muxer settings */ +const struct pinmux_config uart_pins[] = { + { pinmux[8], 2, 7 }, + { pinmux[9], 2, 0 } +}; + +/* I2C pin muxer settings */ +const struct pinmux_config i2c_pins[] = { + { pinmux[9], 2, 3 }, + { pinmux[9], 2, 4 } +}; + +int board_init(void) +{ +#ifndef CONFIG_USE_IRQ + /* + * Mask all IRQs by clearing the global enable and setting + * the enable clear for all the 90 interrupts. + */ + + writel(0, &davinci_aintc_regs->ger); + + writel(0, &davinci_aintc_regs->hier); + + writel(0xffffffff, &davinci_aintc_regs->ecr1); + writel(0xffffffff, &davinci_aintc_regs->ecr2); + writel(0xffffffff, &davinci_aintc_regs->ecr3); +#endif + + /* arch number of the board */ + gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_DA830_EVM; + + /* address of boot parameters */ + gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR; + + /* + * Power on required peripherals + * ARM does not have access by default to PSC0 and PSC1 + * assuming here that the DSP bootloader has set the IOPU + * such that PSC access is available to ARM + */ + lpsc_on(DAVINCI_LPSC_AEMIF); /* NAND, NOR */ + lpsc_on(DAVINCI_LPSC_SPI0); /* Serial Flash */ + lpsc_on(DAVINCI_LPSC_EMAC); /* image download */ + lpsc_on(DAVINCI_LPSC_UART2); /* console */ + lpsc_on(DAVINCI_LPSC_GPIO); + + /* setup the SUSPSRC for ARM to control emulation suspend */ + writel(readl(&davinci_syscfg_regs->suspsrc) & + ~(DAVINCI_SYSCFG_SUSPSRC_EMAC | DAVINCI_SYSCFG_SUSPSRC_I2C | + DAVINCI_SYSCFG_SUSPSRC_SPI0 | DAVINCI_SYSCFG_SUSPSRC_TIMER0 | + DAVINCI_SYSCFG_SUSPSRC_UART2), + &davinci_syscfg_regs->suspsrc); + +#ifdef CONFIG_SPI_FLASH + if (davinci_configure_pin_mux(spi0_pins, ARRAY_SIZE(spi0_pins)) != 0) + return 1; +#endif + + if (davinci_configure_pin_mux(uart_pins, ARRAY_SIZE(uart_pins)) != 0) + return 1; + + if (davinci_configure_pin_mux(i2c_pins, ARRAY_SIZE(i2c_pins)) != 0) + return 1; + + /* enable the console UART */ + writel((DAVINCI_UART_PWREMU_MGMT_FREE | DAVINCI_UART_PWREMU_MGMT_URRST | + DAVINCI_UART_PWREMU_MGMT_UTRST), + &davinci_uart2_ctrl_regs->pwremu_mgmt); + + return(0); +} -- cgit v1.2.3 From c1ee63cee89c5822fbbcc63586c8f2a1add70614 Mon Sep 17 00:00:00 2001 From: Sandeep Paulraj Date: Sat, 21 Nov 2009 18:08:49 -0500 Subject: TI DaVinci DM646x: Enable NAND on DM6467 EVM This patch enables NAND on the DM6467 EVM Signed-off-by: Sandeep Paulraj --- board/davinci/dm6467evm/dm6467evm.c | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'board') diff --git a/board/davinci/dm6467evm/dm6467evm.c b/board/davinci/dm6467evm/dm6467evm.c index ac3b28299..994a9aae9 100644 --- a/board/davinci/dm6467evm/dm6467evm.c +++ b/board/davinci/dm6467evm/dm6467evm.c @@ -18,6 +18,8 @@ #include #include +#include +#include DECLARE_GLOBAL_DATA_PTR; @@ -28,3 +30,12 @@ int board_init(void) return 0; } + +#ifdef CONFIG_NAND_DAVINCI +int board_nand_init(struct nand_chip *nand) +{ + davinci_nand_init(nand); + + return 0; +} +#endif -- cgit v1.2.3 From 43a5f0df2f2e3a2b5eab05d6742501c98d3c0d0c Mon Sep 17 00:00:00 2001 From: Po-Yu Chuang Date: Wed, 11 Nov 2009 17:27:30 +0800 Subject: arm: A320: Add support for Faraday A320 evaluation board This patch adds support for A320 evaluation board from Faraday. This board uses FA526 processor by default and has 512kB and 32MB NOR flash, 64M RAM. FA526 is an ARMv4 processor and uses the ARM920T source in this patch. Signed-off-by: Po-Yu Chuang --- MAINTAINERS | 4 + MAKEALL | 1 + Makefile | 3 + board/faraday/a320evb/Makefile | 51 ++++++++ board/faraday/a320evb/a320evb.c | 73 +++++++++++ board/faraday/a320evb/config.mk | 35 ++++++ board/faraday/a320evb/lowlevel_init.S | 118 ++++++++++++++++++ cpu/arm920t/a320/Makefile | 47 +++++++ cpu/arm920t/a320/ftsmc020.c | 51 ++++++++ cpu/arm920t/a320/reset.S | 22 ++++ cpu/arm920t/a320/timer.c | 193 +++++++++++++++++++++++++++++ include/asm-arm/arch-a320/a320.h | 35 ++++++ include/asm-arm/arch-a320/ftpmu010.h | 146 ++++++++++++++++++++++ include/asm-arm/arch-a320/ftsdmc020.h | 103 ++++++++++++++++ include/asm-arm/arch-a320/ftsmc020.h | 79 ++++++++++++ include/asm-arm/arch-a320/fttmr010.h | 73 +++++++++++ include/configs/a320evb.h | 222 ++++++++++++++++++++++++++++++++++ 17 files changed, 1256 insertions(+) create mode 100644 board/faraday/a320evb/Makefile create mode 100644 board/faraday/a320evb/a320evb.c create mode 100644 board/faraday/a320evb/config.mk create mode 100644 board/faraday/a320evb/lowlevel_init.S create mode 100644 cpu/arm920t/a320/Makefile create mode 100644 cpu/arm920t/a320/ftsmc020.c create mode 100644 cpu/arm920t/a320/reset.S create mode 100644 cpu/arm920t/a320/timer.c create mode 100644 include/asm-arm/arch-a320/a320.h create mode 100644 include/asm-arm/arch-a320/ftpmu010.h create mode 100644 include/asm-arm/arch-a320/ftsdmc020.h create mode 100644 include/asm-arm/arch-a320/ftsmc020.h create mode 100644 include/asm-arm/arch-a320/fttmr010.h create mode 100644 include/configs/a320evb.h (limited to 'board') diff --git a/MAINTAINERS b/MAINTAINERS index ff9b7c554..8a61f5b2b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -545,6 +545,10 @@ Rick Bronson AT91RM9200DK at91rm9200 +Po-Yu Chuang + + a320evb FA526 (ARM920T-like) (a320 SoC) + George G. Davis assabet SA1100 diff --git a/MAKEALL b/MAKEALL index 71e52c50a..6ee5c4999 100755 --- a/MAKEALL +++ b/MAKEALL @@ -539,6 +539,7 @@ LIST_ARM7=" \ ######################################################################### LIST_ARM9=" \ + a320evb \ ap920t \ ap922_XA10 \ ap926ejs \ diff --git a/Makefile b/Makefile index 50989aa69..b891b1b72 100644 --- a/Makefile +++ b/Makefile @@ -2696,6 +2696,9 @@ shannon_config : unconfig ## ARM92xT Systems ######################################################################### +a320evb_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm920t a320evb faraday a320 + ######################################################################### ## Atmel AT91RM9200 Systems ######################################################################### diff --git a/board/faraday/a320evb/Makefile b/board/faraday/a320evb/Makefile new file mode 100644 index 000000000..74f660d23 --- /dev/null +++ b/board/faraday/a320evb/Makefile @@ -0,0 +1,51 @@ +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := a320evb.o +SOBJS := lowlevel_init.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/faraday/a320evb/a320evb.c b/board/faraday/a320evb/a320evb.c new file mode 100644 index 000000000..85b11b96a --- /dev/null +++ b/board/faraday/a320evb/a320evb.c @@ -0,0 +1,73 @@ +/* + * (C) Copyright 2009 Faraday Technology + * Po-Yu Chuang + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include + +#include + +DECLARE_GLOBAL_DATA_PTR; + +/* + * Miscellaneous platform dependent initialisations + */ + +int board_init(void) +{ + gd->bd->bi_arch_number = MACH_TYPE_FARADAY; + gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; + + ftsmc020_init(); /* initialize Flash */ + return 0; +} + +int dram_init(void) +{ + unsigned long sdram_base = PHYS_SDRAM_1; + unsigned long expected_size = PHYS_SDRAM_1_SIZE; + unsigned long actual_size; + + actual_size = get_ram_size((void *)sdram_base, expected_size); + + gd->bd->bi_dram[0].start = sdram_base; + gd->bd->bi_dram[0].size = actual_size; + + if (expected_size != actual_size) + printf("Warning: Only %lu of %lu MiB SDRAM is working\n", + actual_size >> 20, expected_size >> 20); + + return 0; +} + +int board_eth_init(bd_t *bd) +{ + return ftmac100_initialize(bd); +} + +ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info) +{ + if (banknum == 0) { /* non-CFI boot flash */ + info->portwidth = FLASH_CFI_8BIT; + info->chipwidth = FLASH_CFI_BY8; + info->interface = FLASH_CFI_X8; + return 1; + } else + return 0; +} diff --git a/board/faraday/a320evb/config.mk b/board/faraday/a320evb/config.mk new file mode 100644 index 000000000..aa25b9895 --- /dev/null +++ b/board/faraday/a320evb/config.mk @@ -0,0 +1,35 @@ +# +# (C) Copyright 2009 Faraday Technology +# Po-Yu Chuang +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# Faraday A320 board with FA526/FA626TE/ARM926EJ-S cpus +# +# see http://www.faraday-tech.com/ for more information + +# A320 has 1 bank of 64 MB DRAM +# +# 1000'0000 to 1400'0000 +# +# Linux-Kernel is expected to be at 1000'8000, entry 1000'8000 +# +# we load ourself to 13f8'0000 +# +# download area is 1200'0000 + +TEXT_BASE = 0x13f80000 diff --git a/board/faraday/a320evb/lowlevel_init.S b/board/faraday/a320evb/lowlevel_init.S new file mode 100644 index 000000000..97718c0c0 --- /dev/null +++ b/board/faraday/a320evb/lowlevel_init.S @@ -0,0 +1,118 @@ +/* + * (C) Copyright 2009 Faraday Technology + * Po-Yu Chuang + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include + +#include +#include + +/* + * parameters for the SDRAM controller + */ +#define TP0_A (CONFIG_FTSDMC020_BASE + FTSDMC020_OFFSET_TP0) +#define TP1_A (CONFIG_FTSDMC020_BASE + FTSDMC020_OFFSET_TP1) +#define CR_A (CONFIG_FTSDMC020_BASE + FTSDMC020_OFFSET_CR) +#define B0_BSR_A (CONFIG_FTSDMC020_BASE + FTSDMC020_OFFSET_BANK0_BSR) +#define ACR_A (CONFIG_FTSDMC020_BASE + FTSDMC020_OFFSET_ACR) + +#define TP0_D CONFIG_SYS_FTSDMC020_TP0 +#define TP1_D CONFIG_SYS_FTSDMC020_TP1 +#define CR_D1 FTSDMC020_CR_IPREC +#define CR_D2 FTSDMC020_CR_ISMR +#define CR_D3 FTSDMC020_CR_IREF + +#define B0_BSR_D (CONFIG_SYS_FTSDMC020_BANK0_BSR | \ + FTSDMC020_BANK_BASE(PHYS_SDRAM_1)) +#define ACR_D FTSDMC020_ACR_TOC(0x18) + +/* + * numeric 7 segment display + */ +.macro led, num + write32 CONFIG_DEBUG_LED, \num +.endm + +/* + * Waiting for SDRAM to set up + */ +.macro wait_sdram + ldr r0, =CONFIG_FTSDMC020_BASE +1: + ldr r1, [r0, #FTSDMC020_OFFSET_CR] + cmp r1, #0 + bne 1b +.endm + +.globl lowlevel_init +lowlevel_init: + mov r11, lr + + led 0x0 + + bl init_sdmc + + led 0x1 + + /* everything is fine now */ + mov lr, r11 + mov pc, lr + +/* + * memory initialization + */ +init_sdmc: + led 0x10 + + /* set SDRAM register */ + + write32 TP0_A, TP0_D + led 0x11 + + write32 TP1_A, TP1_D + led 0x12 + + /* set to precharge */ + write32 CR_A, CR_D1 + led 0x13 + + wait_sdram + led 0x14 + + /* set mode register */ + write32 CR_A, CR_D2 + led 0x15 + + wait_sdram + led 0x16 + + /* set to refresh */ + write32 CR_A, CR_D3 + led 0x17 + + wait_sdram + led 0x18 + + write32 B0_BSR_A, B0_BSR_D + led 0x19 + + write32 ACR_A, ACR_D + led 0x1a + + mov pc, lr diff --git a/cpu/arm920t/a320/Makefile b/cpu/arm920t/a320/Makefile new file mode 100644 index 000000000..f030c5362 --- /dev/null +++ b/cpu/arm920t/a320/Makefile @@ -0,0 +1,47 @@ +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(SOC).a + +SOBJS += reset.o +COBJS += timer.o +COBJS += ftsmc020.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) + +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/cpu/arm920t/a320/ftsmc020.c b/cpu/arm920t/a320/ftsmc020.c new file mode 100644 index 000000000..76465373e --- /dev/null +++ b/cpu/arm920t/a320/ftsmc020.c @@ -0,0 +1,51 @@ +/* + * (C) Copyright 2009 Faraday Technology + * Po-Yu Chuang + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include + +struct ftsmc020_config { + unsigned int config; + unsigned int timing; +}; + +static struct ftsmc020_config config[] = CONFIG_SYS_FTSMC020_CONFIGS; + +static struct ftsmc020 *smc = (struct ftsmc020 *)CONFIG_FTSMC020_BASE; + +static void ftsmc020_setup_bank(unsigned int bank, struct ftsmc020_config *cfg) +{ + if (bank > 3) { + printf("bank # %u invalid\n", bank); + return; + } + + writel(cfg->config, &smc->bank[bank].cr); + writel(cfg->timing, &smc->bank[bank].tpr); +} + +void ftsmc020_init(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(config); i++) + ftsmc020_setup_bank(i, &config[i]); +} diff --git a/cpu/arm920t/a320/reset.S b/cpu/arm920t/a320/reset.S new file mode 100644 index 000000000..12ca527c5 --- /dev/null +++ b/cpu/arm920t/a320/reset.S @@ -0,0 +1,22 @@ +/* + * (C) Copyright 2009 Faraday Technology + * Po-Yu Chuang + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +.global reset_cpu +reset_cpu: + b reset_cpu diff --git a/cpu/arm920t/a320/timer.c b/cpu/arm920t/a320/timer.c new file mode 100644 index 000000000..bb655930d --- /dev/null +++ b/cpu/arm920t/a320/timer.c @@ -0,0 +1,193 @@ +/* + * (C) Copyright 2009 Faraday Technology + * Po-Yu Chuang + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include + +static ulong timestamp; +static ulong lastdec; + +static struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_FTTMR010_BASE; +static struct ftpmu010 *pmu = (struct ftpmu010 *)CONFIG_FTPMU010_BASE; + +#define TIMER_CLOCK 32768 +#define TIMER_LOAD_VAL 0xffffffff + +int timer_init(void) +{ + unsigned int oscc; + unsigned int cr; + + debug("%s()\n", __func__); + + /* disable timers */ + writel(0, &tmr->cr); + + /* + * use 32768Hz oscillator for RTC, WDT, TIMER + */ + + /* enable the 32768Hz oscillator */ + oscc = readl(&pmu->OSCC); + oscc &= ~(FTPMU010_OSCC_OSCL_OFF | FTPMU010_OSCC_OSCL_TRI); + writel(oscc, &pmu->OSCC); + + /* wait until ready */ + while (!(readl(&pmu->OSCC) & FTPMU010_OSCC_OSCL_STABLE)) + ; + + /* select 32768Hz oscillator */ + oscc = readl(&pmu->OSCC); + oscc |= FTPMU010_OSCC_OSCL_RTCLSEL; + writel(oscc, &pmu->OSCC); + + /* setup timer */ + writel(TIMER_LOAD_VAL, &tmr->timer3_load); + writel(TIMER_LOAD_VAL, &tmr->timer3_counter); + writel(0, &tmr->timer3_match1); + writel(0, &tmr->timer3_match2); + + /* we don't want timer to issue interrupts */ + writel(FTTMR010_TM3_MATCH1 | + FTTMR010_TM3_MATCH2 | + FTTMR010_TM3_OVERFLOW, + &tmr->interrupt_mask); + + cr = readl(&tmr->cr); + cr |= FTTMR010_TM3_CLOCK; /* use external clock */ + cr |= FTTMR010_TM3_ENABLE; + writel(cr, &tmr->cr); + + /* init the timestamp and lastdec value */ + reset_timer_masked(); + + return 0; +} + +/* + * timer without interrupts + */ + +/* + * reset time + */ +void reset_timer_masked(void) +{ + /* capure current decrementer value time */ + lastdec = readl(&tmr->timer3_counter) / (TIMER_CLOCK / CONFIG_SYS_HZ); + timestamp = 0; /* start "advancing" time stamp from 0 */ + + debug("%s(): lastdec = %lx\n", __func__, lastdec); +} + +void reset_timer(void) +{ + debug("%s()\n", __func__); + reset_timer_masked(); +} + +/* + * return timer ticks + */ +ulong get_timer_masked(void) +{ + /* current tick value */ + ulong now = readl(&tmr->timer3_counter) / (TIMER_CLOCK / CONFIG_SYS_HZ); + + debug("%s(): now = %lx, lastdec = %lx\n", __func__, now, lastdec); + + if (lastdec >= now) { + /* + * normal mode (non roll) + * move stamp fordward with absoulte diff ticks + */ + timestamp += lastdec - now; + } else { + /* + * we have overflow of the count down timer + * + * nts = ts + ld + (TLV - now) + * ts=old stamp, ld=time that passed before passing through -1 + * (TLV-now) amount of time after passing though -1 + * nts = new "advancing time stamp"...it could also roll and + * cause problems. + */ + timestamp += lastdec + TIMER_LOAD_VAL - now; + } + + lastdec = now; + + debug("%s() returns %lx\n", __func__, timestamp); + + return timestamp; +} + +/* + * return difference between timer ticks and base + */ +ulong get_timer(ulong base) +{ + debug("%s(%lx)\n", __func__, base); + return get_timer_masked() - base; +} + +void set_timer(ulong t) +{ + debug("%s(%lx)\n", __func__, t); + timestamp = t; +} + +/* delay x useconds AND perserve advance timstamp value */ +void udelay(unsigned long usec) +{ + long tmo = usec * (TIMER_CLOCK / 1000) / 1000; + unsigned long now, last = readl(&tmr->timer3_counter); + + debug("%s(%lu)\n", __func__, usec); + while (tmo > 0) { + now = readl(&tmr->timer3_counter); + if (now > last) /* count down timer overflow */ + tmo -= TIMER_LOAD_VAL + last - now; + else + tmo -= last - now; + last = now; + } +} + +/* + * This function is derived from PowerPC code (read timebase as long long). + * On ARM it just returns the timer value. + */ +unsigned long long get_ticks(void) +{ + debug("%s()\n", __func__); + return get_timer(0); +} + +/* + * This function is derived from PowerPC code (timebase clock frequency). + * On ARM it returns the number of timer ticks per second. + */ +ulong get_tbclk(void) +{ + debug("%s()\n", __func__); + return CONFIG_SYS_HZ; +} diff --git a/include/asm-arm/arch-a320/a320.h b/include/asm-arm/arch-a320/a320.h new file mode 100644 index 000000000..5c0a09750 --- /dev/null +++ b/include/asm-arm/arch-a320/a320.h @@ -0,0 +1,35 @@ +/* + * (C) Copyright 2009 Faraday Technology + * Po-Yu Chuang + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __A320_H +#define __A320_H + +/* + * Hardware register bases + */ +#define CONFIG_FTSMC020_BASE 0x90200000 /* Static Memory Controller */ +#define CONFIG_DEBUG_LED 0x902ffffc /* Debug LED */ +#define CONFIG_FTSDMC020_BASE 0x90300000 /* SDRAM Controller */ +#define CONFIG_FTMAC100_BASE 0x90900000 /* Ethernet */ +#define CONFIG_FTPMU010_BASE 0x98100000 /* Power Management Unit */ +#define CONFIG_FTTMR010_BASE 0x98400000 /* Timer */ +#define CONFIG_FTRTC010_BASE 0x98600000 /* Real Time Clock*/ + +#endif /* __A320_H */ + diff --git a/include/asm-arm/arch-a320/ftpmu010.h b/include/asm-arm/arch-a320/ftpmu010.h new file mode 100644 index 000000000..8ef7a3714 --- /dev/null +++ b/include/asm-arm/arch-a320/ftpmu010.h @@ -0,0 +1,146 @@ +/* + * (C) Copyright 2009 Faraday Technology + * Po-Yu Chuang + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* + * Power Management Unit + */ +#ifndef __FTPMU010_H +#define __FTPMU010_H + +struct ftpmu010 { + unsigned int IDNMBR0; /* 0x00 */ + unsigned int reserved0; /* 0x04 */ + unsigned int OSCC; /* 0x08 */ + unsigned int PMODE; /* 0x0C */ + unsigned int PMCR; /* 0x10 */ + unsigned int PED; /* 0x14 */ + unsigned int PEDSR; /* 0x18 */ + unsigned int reserved1; /* 0x1C */ + unsigned int PMSR; /* 0x20 */ + unsigned int PGSR; /* 0x24 */ + unsigned int MFPSR; /* 0x28 */ + unsigned int MISC; /* 0x2C */ + unsigned int PDLLCR0; /* 0x30 */ + unsigned int PDLLCR1; /* 0x34 */ + unsigned int AHBMCLKOFF; /* 0x38 */ + unsigned int APBMCLKOFF; /* 0x3C */ + unsigned int DCSRCR0; /* 0x40 */ + unsigned int DCSRCR1; /* 0x44 */ + unsigned int DCSRCR2; /* 0x48 */ + unsigned int SDRAMHTC; /* 0x4C */ + unsigned int PSPR0; /* 0x50 */ + unsigned int PSPR1; /* 0x54 */ + unsigned int PSPR2; /* 0x58 */ + unsigned int PSPR3; /* 0x5C */ + unsigned int PSPR4; /* 0x60 */ + unsigned int PSPR5; /* 0x64 */ + unsigned int PSPR6; /* 0x68 */ + unsigned int PSPR7; /* 0x6C */ + unsigned int PSPR8; /* 0x70 */ + unsigned int PSPR9; /* 0x74 */ + unsigned int PSPR10; /* 0x78 */ + unsigned int PSPR11; /* 0x7C */ + unsigned int PSPR12; /* 0x80 */ + unsigned int PSPR13; /* 0x84 */ + unsigned int PSPR14; /* 0x88 */ + unsigned int PSPR15; /* 0x8C */ + unsigned int AHBDMA_RACCS; /* 0x90 */ + unsigned int reserved2; /* 0x94 */ + unsigned int reserved3; /* 0x98 */ + unsigned int JSS; /* 0x9C */ + unsigned int CFC_RACC; /* 0xA0 */ + unsigned int SSP1_RACC; /* 0xA4 */ + unsigned int UART1TX_RACC; /* 0xA8 */ + unsigned int UART1RX_RACC; /* 0xAC */ + unsigned int UART2TX_RACC; /* 0xB0 */ + unsigned int UART2RX_RACC; /* 0xB4 */ + unsigned int SDC_RACC; /* 0xB8 */ + unsigned int I2SAC97_RACC; /* 0xBC */ + unsigned int IRDATX_RACC; /* 0xC0 */ + unsigned int reserved4; /* 0xC4 */ + unsigned int USBD_RACC; /* 0xC8 */ + unsigned int IRDARX_RACC; /* 0xCC */ + unsigned int IRDA_RACC; /* 0xD0 */ + unsigned int ED0_RACC; /* 0xD4 */ + unsigned int ED1_RACC; /* 0xD8 */ +}; + +/* + * ID Number 0 Register + */ +#define FTPMU010_ID_A320A 0x03200000 +#define FTPMU010_ID_A320C 0x03200010 +#define FTPMU010_ID_A320D 0x03200030 + +/* + * OSC Control Register + */ +#define FTPMU010_OSCC_OSCH_TRI (1 << 11) +#define FTPMU010_OSCC_OSCH_STABLE (1 << 9) +#define FTPMU010_OSCC_OSCH_OFF (1 << 8) + +#define FTPMU010_OSCC_OSCL_TRI (1 << 3) +#define FTPMU010_OSCC_OSCL_RTCLSEL (1 << 2) +#define FTPMU010_OSCC_OSCL_STABLE (1 << 1) +#define FTPMU010_OSCC_OSCL_OFF (1 << 0) + +/* + * Power Mode Register + */ +#define FTPMU010_PMODE_DIVAHBCLK_MASK (0x7 << 4) +#define FTPMU010_PMODE_DIVAHBCLK_2 (0x0 << 4) +#define FTPMU010_PMODE_DIVAHBCLK_3 (0x1 << 4) +#define FTPMU010_PMODE_DIVAHBCLK_4 (0x2 << 4) +#define FTPMU010_PMODE_DIVAHBCLK_6 (0x3 << 4) +#define FTPMU010_PMODE_DIVAHBCLK_8 (0x4 << 4) +#define FTPMU010_PMODE_DIVAHBCLK(pmode) (((pmode) >> 4) & 0x7) +#define FTPMU010_PMODE_FCS (1 << 2) +#define FTPMU010_PMODE_TURBO (1 << 1) +#define FTPMU010_PMODE_SLEEP (1 << 0) + +/* + * Power Manager Status Register + */ +#define FTPMU010_PMSR_SMR (1 << 10) + +#define FTPMU010_PMSR_RDH (1 << 2) +#define FTPMU010_PMSR_PH (1 << 1) +#define FTPMU010_PMSR_CKEHLOW (1 << 0) + +/* + * Multi-Function Port Setting Register + */ +#define FTPMU010_MFPSR_MODEMPINSEL (1 << 14) +#define FTPMU010_MFPSR_AC97CLKOUTSEL (1 << 13) +#define FTPMU010_MFPSR_AC97PINSEL (1 << 3) + +/* + * PLL/DLL Control Register 0 + */ +#define FTPMU010_PDLLCR0_HCLKOUTDIS(cr0) (((cr0) >> 20) & 0xf) +#define FTPMU010_PDLLCR0_DLLFRAG (1 << 19) +#define FTPMU010_PDLLCR0_DLLSTSEL (1 << 18) +#define FTPMU010_PDLLCR0_DLLSTABLE (1 << 17) +#define FTPMU010_PDLLCR0_DLLDIS (1 << 16) +#define FTPMU010_PDLLCR0_PLL1NS(cr0) (((cr0) >> 3) & 0x1ff) +#define FTPMU010_PDLLCR0_PLL1STSEL (1 << 2) +#define FTPMU010_PDLLCR0_PLL1STABLE (1 << 1) +#define FTPMU010_PDLLCR0_PLL1DIS (1 << 0) + +#endif /* __FTPMU010_H */ diff --git a/include/asm-arm/arch-a320/ftsdmc020.h b/include/asm-arm/arch-a320/ftsdmc020.h new file mode 100644 index 000000000..069977200 --- /dev/null +++ b/include/asm-arm/arch-a320/ftsdmc020.h @@ -0,0 +1,103 @@ +/* + * (C) Copyright 2009 Faraday Technology + * Po-Yu Chuang + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* + * SDRAM Controller + */ +#ifndef __FTSDMC020_H +#define __FTSDMC020_H + +#define FTSDMC020_OFFSET_TP0 0x00 +#define FTSDMC020_OFFSET_TP1 0x04 +#define FTSDMC020_OFFSET_CR 0x08 +#define FTSDMC020_OFFSET_BANK0_BSR 0x0C +#define FTSDMC020_OFFSET_BANK1_BSR 0x10 +#define FTSDMC020_OFFSET_BANK2_BSR 0x14 +#define FTSDMC020_OFFSET_BANK3_BSR 0x18 +#define FTSDMC020_OFFSET_BANK4_BSR 0x1C +#define FTSDMC020_OFFSET_BANK5_BSR 0x20 +#define FTSDMC020_OFFSET_BANK6_BSR 0x24 +#define FTSDMC020_OFFSET_BANK7_BSR 0x28 +#define FTSDMC020_OFFSET_ACR 0x34 + +/* + * Timing Parametet 0 Register + */ +#define FTSDMC020_TP0_TCL(x) ((x) & 0x3) +#define FTSDMC020_TP0_TWR(x) (((x) & 0x3) << 4) +#define FTSDMC020_TP0_TRF(x) (((x) & 0xf) << 8) +#define FTSDMC020_TP0_TRCD(x) (((x) & 0x7) << 12) +#define FTSDMC020_TP0_TRP(x) (((x) & 0xf) << 16) +#define FTSDMC020_TP0_TRAS(x) (((x) & 0xf) << 20) + +/* + * Timing Parametet 1 Register + */ +#define FTSDMC020_TP1_REF_INTV(x) ((x) & 0xffff) +#define FTSDMC020_TP1_INI_REFT(x) (((x) & 0xf) << 16) +#define FTSDMC020_TP1_INI_PREC(x) (((x) & 0xf) << 20) + +/* + * Configuration Register + */ +#define FTSDMC020_CR_SREF (1 << 0) +#define FTSDMC020_CR_PWDN (1 << 1) +#define FTSDMC020_CR_ISMR (1 << 2) +#define FTSDMC020_CR_IREF (1 << 3) +#define FTSDMC020_CR_IPREC (1 << 4) +#define FTSDMC020_CR_REFTYPE (1 << 5) + +/* + * SDRAM External Bank Base/Size Register + */ +#define FTSDMC020_BANK_ENABLE (1 << 28) + +#define FTSDMC020_BANK_BASE(addr) (((addr) >> 20) << 16) + +#define FTSDMC020_BANK_DDW_X4 (0 << 12) +#define FTSDMC020_BANK_DDW_X8 (1 << 12) +#define FTSDMC020_BANK_DDW_X16 (2 << 12) +#define FTSDMC020_BANK_DDW_X32 (3 << 12) + +#define FTSDMC020_BANK_DSZ_16M (0 << 8) +#define FTSDMC020_BANK_DSZ_64M (1 << 8) +#define FTSDMC020_BANK_DSZ_128M (2 << 8) +#define FTSDMC020_BANK_DSZ_256M (3 << 8) + +#define FTSDMC020_BANK_MBW_8 (0 << 4) +#define FTSDMC020_BANK_MBW_16 (1 << 4) +#define FTSDMC020_BANK_MBW_32 (2 << 4) + +#define FTSDMC020_BANK_SIZE_1M 0x0 +#define FTSDMC020_BANK_SIZE_2M 0x1 +#define FTSDMC020_BANK_SIZE_4M 0x2 +#define FTSDMC020_BANK_SIZE_8M 0x3 +#define FTSDMC020_BANK_SIZE_16M 0x4 +#define FTSDMC020_BANK_SIZE_32M 0x5 +#define FTSDMC020_BANK_SIZE_64M 0x6 +#define FTSDMC020_BANK_SIZE_128M 0x7 +#define FTSDMC020_BANK_SIZE_256M 0x8 + +/* + * Arbiter Control Register + */ +#define FTSDMC020_ACR_TOC(x) ((x) & 0x1f) +#define FTSDMC020_ACR_TOE (1 << 8) + +#endif /* __FTSDMC020_H */ diff --git a/include/asm-arm/arch-a320/ftsmc020.h b/include/asm-arm/arch-a320/ftsmc020.h new file mode 100644 index 000000000..95d950033 --- /dev/null +++ b/include/asm-arm/arch-a320/ftsmc020.h @@ -0,0 +1,79 @@ +/* + * (C) Copyright 2009 Faraday Technology + * Po-Yu Chuang + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* + * Static Memory Controller + */ +#ifndef __FTSMC020_H +#define __FTSMC020_H + +#ifndef __ASSEMBLY__ + +struct ftsmc020 { + struct { + unsigned int cr; /* 0x00, 0x08, 0x10, 0x18 */ + unsigned int tpr; /* 0x04, 0x0c, 0x14, 0x1c */ + } bank[4]; + unsigned int pad[8]; /* 0x20 - 0x3c */ + unsigned int ssr; /* 0x40 */ +}; + +void ftsmc020_init(void); + +#endif /* __ASSEMBLY__ */ + +/* + * Memory Bank Configuration Register + */ +#define FTSMC020_BANK_ENABLE (1 << 28) +#define FTSMC020_BANK_BASE(x) ((x) & 0x0fff1000) + +#define FTSMC020_BANK_WPROT (1 << 11) + +#define FTSMC020_BANK_SIZE_32K (0xb << 4) +#define FTSMC020_BANK_SIZE_64K (0xc << 4) +#define FTSMC020_BANK_SIZE_128K (0xd << 4) +#define FTSMC020_BANK_SIZE_256K (0xe << 4) +#define FTSMC020_BANK_SIZE_512K (0xf << 4) +#define FTSMC020_BANK_SIZE_1M (0x0 << 4) +#define FTSMC020_BANK_SIZE_2M (0x1 << 4) +#define FTSMC020_BANK_SIZE_4M (0x2 << 4) +#define FTSMC020_BANK_SIZE_8M (0x3 << 4) +#define FTSMC020_BANK_SIZE_16M (0x4 << 4) +#define FTSMC020_BANK_SIZE_32M (0x5 << 4) + +#define FTSMC020_BANK_MBW_8 (0x0 << 0) +#define FTSMC020_BANK_MBW_16 (0x1 << 0) +#define FTSMC020_BANK_MBW_32 (0x2 << 0) + +/* + * Memory Bank Timing Parameter Register + */ +#define FTSMC020_TPR_ETRNA(x) (((x) & 0xf) << 28) +#define FTSMC020_TPR_EATI(x) (((x) & 0xf) << 24) +#define FTSMC020_TPR_RBE (1 << 20) +#define FTSMC020_TPR_AST(x) (((x) & 0x3) << 18) +#define FTSMC020_TPR_CTW(x) (((x) & 0x3) << 16) +#define FTSMC020_TPR_ATI(x) (((x) & 0xf) << 12) +#define FTSMC020_TPR_AT2(x) (((x) & 0x3) << 8) +#define FTSMC020_TPR_WTC(x) (((x) & 0x3) << 6) +#define FTSMC020_TPR_AHT(x) (((x) & 0x3) << 4) +#define FTSMC020_TPR_TRNA(x) (((x) & 0xf) << 0) + +#endif /* __FTSMC020_H */ diff --git a/include/asm-arm/arch-a320/fttmr010.h b/include/asm-arm/arch-a320/fttmr010.h new file mode 100644 index 000000000..72abcb365 --- /dev/null +++ b/include/asm-arm/arch-a320/fttmr010.h @@ -0,0 +1,73 @@ +/* + * (C) Copyright 2009 Faraday Technology + * Po-Yu Chuang + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* + * Timer + */ +#ifndef __FTTMR010_H +#define __FTTMR010_H + +struct fttmr010 { + unsigned int timer1_counter; /* 0x00 */ + unsigned int timer1_load; /* 0x04 */ + unsigned int timer1_match1; /* 0x08 */ + unsigned int timer1_match2; /* 0x0c */ + unsigned int timer2_counter; /* 0x10 */ + unsigned int timer2_load; /* 0x14 */ + unsigned int timer2_match1; /* 0x18 */ + unsigned int timer2_match2; /* 0x1c */ + unsigned int timer3_counter; /* 0x20 */ + unsigned int timer3_load; /* 0x24 */ + unsigned int timer3_match1; /* 0x28 */ + unsigned int timer3_match2; /* 0x2c */ + unsigned int cr; /* 0x30 */ + unsigned int interrupt_state; /* 0x34 */ + unsigned int interrupt_mask; /* 0x38 */ +}; + +/* + * Timer Control Register + */ +#define FTTMR010_TM3_UPDOWN (1 << 11) +#define FTTMR010_TM2_UPDOWN (1 << 10) +#define FTTMR010_TM1_UPDOWN (1 << 9) +#define FTTMR010_TM3_OFENABLE (1 << 8) +#define FTTMR010_TM3_CLOCK (1 << 7) +#define FTTMR010_TM3_ENABLE (1 << 6) +#define FTTMR010_TM2_OFENABLE (1 << 5) +#define FTTMR010_TM2_CLOCK (1 << 4) +#define FTTMR010_TM2_ENABLE (1 << 3) +#define FTTMR010_TM1_OFENABLE (1 << 2) +#define FTTMR010_TM1_CLOCK (1 << 1) +#define FTTMR010_TM1_ENABLE (1 << 0) + +/* + * Timer Interrupt State & Mask Registers + */ +#define FTTMR010_TM3_OVERFLOW (1 << 8) +#define FTTMR010_TM3_MATCH2 (1 << 7) +#define FTTMR010_TM3_MATCH1 (1 << 6) +#define FTTMR010_TM2_OVERFLOW (1 << 5) +#define FTTMR010_TM2_MATCH2 (1 << 4) +#define FTTMR010_TM2_MATCH1 (1 << 3) +#define FTTMR010_TM1_OVERFLOW (1 << 2) +#define FTTMR010_TM1_MATCH2 (1 << 1) +#define FTTMR010_TM1_MATCH1 (1 << 0) + +#endif /* __FTTMR010_H */ diff --git a/include/configs/a320evb.h b/include/configs/a320evb.h new file mode 100644 index 000000000..fcc556321 --- /dev/null +++ b/include/configs/a320evb.h @@ -0,0 +1,222 @@ +/* + * (C) Copyright 2009 Faraday Technology + * Po-Yu Chuang + * + * Configuation settings for the Faraday A320 board. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include + +/*----------------------------------------------------------------------- + * CPU and Board Configuration Options + */ +#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ + +#undef CONFIG_SKIP_LOWLEVEL_INIT + +/*----------------------------------------------------------------------- + * Timer + */ +#define CONFIG_SYS_HZ 1000 /* timer ticks per second */ + +/*----------------------------------------------------------------------- + * Real Time Clock + */ +#define CONFIG_RTC_FTRTC010 + +/*----------------------------------------------------------------------- + * Serial console configuration + */ + +/* FTUART is a high speed NS 16C550A compatible UART */ +#define CONFIG_BAUDRATE 38400 +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_COM1 0x98200000 +#define CONFIG_SYS_NS16550_REG_SIZE -4 +#define CONFIG_SYS_NS16550_CLK 18432000 + +/* valid baudrates */ +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/*----------------------------------------------------------------------- + * Ethernet + */ +#define CONFIG_NET_MULTI +#define CONFIG_FTMAC100 + +#define CONFIG_BOOTDELAY 3 + +/*----------------------------------------------------------------------- + * Command line configuration. + */ +#include + +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DATE +#define CONFIG_CMD_PING + +/*----------------------------------------------------------------------- + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "A320 # " /* Monitor Command Prompt */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ + +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE \ + (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) + +/* max number of command args */ +#define CONFIG_SYS_MAXARGS 16 + +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4 * 1024) /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ (4 * 1024) /* FIQ stack */ +#endif + +/*----------------------------------------------------------------------- + * Size of malloc() pool + */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024) + +/*----------------------------------------------------------------------- + * size in bytes reserved for initial data +*/ +#define CONFIG_SYS_GBL_DATA_SIZE 128 + +/*----------------------------------------------------------------------- + * SDRAM controller configuration + */ +#define CONFIG_SYS_FTSDMC020_TP0 (FTSDMC020_TP0_TRAS(2) | \ + FTSDMC020_TP0_TRP(1) | \ + FTSDMC020_TP0_TRCD(1) | \ + FTSDMC020_TP0_TRF(3) | \ + FTSDMC020_TP0_TWR(1) | \ + FTSDMC020_TP0_TCL(2)) + +#define CONFIG_SYS_FTSDMC020_TP1 (FTSDMC020_TP1_INI_PREC(4) | \ + FTSDMC020_TP1_INI_REFT(8) | \ + FTSDMC020_TP1_REF_INTV(0x180)) + +#define CONFIG_SYS_FTSDMC020_BANK0_BSR (FTSDMC020_BANK_ENABLE | \ + FTSDMC020_BANK_DDW_X16 | \ + FTSDMC020_BANK_DSZ_256M | \ + FTSDMC020_BANK_MBW_32 | \ + FTSDMC020_BANK_SIZE_64M) + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ +#define PHYS_SDRAM_1 0x10000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ + +/* + * Load address and memory test area should agree with + * board/faraday/a320/config.mk. Be careful not to overwrite U-boot itself. + */ +#define CONFIG_SYS_LOAD_ADDR 0x12000000 + +/* memtest works on 63 MB in DRAM */ +#define CONFIG_SYS_MEMTEST_START 0x10000000 +#define CONFIG_SYS_MEMTEST_END 0x13F00000 + +/*----------------------------------------------------------------------- + * Static memory controller configuration + */ + +#include + +#define FTSMC020_BANK0_CONFIG (FTSMC020_BANK_ENABLE | \ + FTSMC020_BANK_BASE(PHYS_FLASH_1) | \ + FTSMC020_BANK_SIZE_1M | \ + FTSMC020_BANK_MBW_8) + +#define FTSMC020_BANK0_TIMING (FTSMC020_TPR_RBE | \ + FTSMC020_TPR_AST(3) | \ + FTSMC020_TPR_CTW(3) | \ + FTSMC020_TPR_ATI(0xf) | \ + FTSMC020_TPR_AT2(3) | \ + FTSMC020_TPR_WTC(3) | \ + FTSMC020_TPR_AHT(3) | \ + FTSMC020_TPR_TRNA(0xf)) + +#define FTSMC020_BANK1_CONFIG (FTSMC020_BANK_ENABLE | \ + FTSMC020_BANK_BASE(PHYS_FLASH_2) | \ + FTSMC020_BANK_SIZE_32M | \ + FTSMC020_BANK_MBW_32) + +#define FTSMC020_BANK1_TIMING (FTSMC020_TPR_AST(3) | \ + FTSMC020_TPR_CTW(3) | \ + FTSMC020_TPR_ATI(0xf) | \ + FTSMC020_TPR_AT2(3) | \ + FTSMC020_TPR_WTC(3) | \ + FTSMC020_TPR_AHT(3) | \ + FTSMC020_TPR_TRNA(0xf)) + +#define CONFIG_SYS_FTSMC020_CONFIGS { \ + { FTSMC020_BANK0_CONFIG, FTSMC020_BANK0_TIMING, }, \ + { FTSMC020_BANK1_CONFIG, FTSMC020_BANK1_TIMING, }, \ +} + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ + +/* use CFI framework */ +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_FLASH_CFI_DRIVER + +/* support JEDEC */ +#define CONFIG_FLASH_CFI_LEGACY +#define CONFIG_SYS_FLASH_LEGACY_512Kx8 + +#define PHYS_FLASH_1 0x00000000 +#define PHYS_FLASH_2 0x00400000 +#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 +#define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, PHYS_FLASH_2, } + +#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1 + +/* max number of memory banks */ +#define CONFIG_SYS_MAX_FLASH_BANKS 2 + +/* max number of sectors on one chip */ +#define CONFIG_SYS_MAX_FLASH_SECT 512 + +#undef CONFIG_SYS_FLASH_EMPTY_INFO + +/* environments */ +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_ADDR 0x00060000 +#define CONFIG_ENV_SIZE 0x20000 + +#endif /* __CONFIG_H */ -- cgit v1.2.3 From c74bfce0fb20ec4d01809fa0566263894923467b Mon Sep 17 00:00:00 2001 From: Graeme Russ Date: Tue, 24 Nov 2009 20:04:12 +1100 Subject: i386: Fix dlmalloc compile warning Signed-off-by: Graeme Russ --- board/eNET/config.mk | 1 + 1 file changed, 1 insertion(+) (limited to 'board') diff --git a/board/eNET/config.mk b/board/eNET/config.mk index a76384130..058026d6f 100644 --- a/board/eNET/config.mk +++ b/board/eNET/config.mk @@ -22,3 +22,4 @@ # TEXT_BASE = 0x38040000 +CFLAGS_dlmalloc.o += -Wa,--no-warn -fno-strict-aliasing -- cgit v1.2.3 From aea14421c52f31e39837aa2890e07e9c70ee61fd Mon Sep 17 00:00:00 2001 From: Graeme Russ Date: Tue, 24 Nov 2009 20:04:14 +1100 Subject: i386: Fix link collisions resulting from gcc4.4.1 upgrade Signed-off-by: Graeme Russ --- board/eNET/config.mk | 1 + 1 file changed, 1 insertion(+) (limited to 'board') diff --git a/board/eNET/config.mk b/board/eNET/config.mk index 058026d6f..c9703ea8e 100644 --- a/board/eNET/config.mk +++ b/board/eNET/config.mk @@ -23,3 +23,4 @@ TEXT_BASE = 0x38040000 CFLAGS_dlmalloc.o += -Wa,--no-warn -fno-strict-aliasing +PLATFORM_CPPFLAGS += -fno-dwarf2-cfi-asm -- cgit v1.2.3 From 0fc1b49ecbd7ec7371f9ede0600e4fd28cec7f33 Mon Sep 17 00:00:00 2001 From: Graeme Russ Date: Tue, 24 Nov 2009 20:04:19 +1100 Subject: i386: Remove inline asm symbols from .dynsym Signed-off-by: Graeme Russ --- board/eNET/eNET_start16.S | 2 ++ cpu/i386/cpu.c | 2 ++ cpu/i386/interrupts.c | 4 +++ lib_i386/bios.S | 70 +++++++++++++++++++++++++++++++++++++++++++++++ lib_i386/bios_pci.S | 2 ++ 5 files changed, 80 insertions(+) (limited to 'board') diff --git a/board/eNET/eNET_start16.S b/board/eNET/eNET_start16.S index 48e4d83a1..af2c13215 100644 --- a/board/eNET/eNET_start16.S +++ b/board/eNET/eNET_start16.S @@ -71,6 +71,8 @@ board_init16: .section .bios, "ax" .code16 .globl realmode_reset +.hidden realmode_reset +.type realmode_reset, @function realmode_reset: /* Alias MMCR to 0xdf000 */ movw $0xfffc, %dx diff --git a/cpu/i386/cpu.c b/cpu/i386/cpu.c index 8baf37df1..4b681057a 100644 --- a/cpu/i386/cpu.c +++ b/cpu/i386/cpu.c @@ -73,6 +73,8 @@ void __attribute__ ((regparm(0))) generate_gpf(void); /* segment 0x70 is an arbitrary segment which does not exist */ asm(".globl generate_gpf\n" + ".hidden generate_gpf\n" + ".type generate_gpf, @function\n" "generate_gpf:\n" "ljmp $0x70, $0x47114711\n"); diff --git a/cpu/i386/interrupts.c b/cpu/i386/interrupts.c index d80cfb192..cbf1c41e1 100644 --- a/cpu/i386/interrupts.c +++ b/cpu/i386/interrupts.c @@ -29,6 +29,8 @@ #define DECLARE_INTERRUPT(x) \ ".globl irq_"#x"\n" \ + ".hidden irq_"#x"\n" \ + ".type irq_"#x", @function\n" \ "irq_"#x":\n" \ "pushl %ebp\n" \ "movl %esp,%ebp\n" \ @@ -229,6 +231,8 @@ __isr__ irq_llsr(int ip, int seg, int irq) * the easiest way I could do it. Maybe it can be made better later. */ asm(".globl irq_common_entry\n" \ + ".hidden irq_common_entry\n" \ + ".type irq_common_entry, @function\n" \ "irq_common_entry:\n" \ "pushl $0\n" \ "pushl $0\n" \ diff --git a/lib_i386/bios.S b/lib_i386/bios.S index d6ca3e315..48f1b8112 100644 --- a/lib_i386/bios.S +++ b/lib_i386/bios.S @@ -50,134 +50,200 @@ jmp realmode_reset .globl rm_int00 +.hidden rm_int00 +.type rm_int00, @function rm_int00: pushw $0 jmp any_interrupt16 .globl rm_int01 +.hidden rm_int01 +.type rm_int01, @function rm_int01: pushw $1 jmp any_interrupt16 .globl rm_int02 +.hidden rm_int02 +.type rm_int02, @function rm_int02: pushw $2 jmp any_interrupt16 .globl rm_int03 +.hidden rm_int03 +.type rm_int03, @function rm_int03: pushw $3 jmp any_interrupt16 .globl rm_int04 +.hidden rm_int04 +.type rm_int04, @function rm_int04: pushw $4 jmp any_interrupt16 .globl rm_int05 +.hidden rm_int05 +.type rm_int05, @function rm_int05: pushw $5 jmp any_interrupt16 .globl rm_int06 +.hidden rm_int06 +.type rm_int06, @function rm_int06: pushw $6 jmp any_interrupt16 .globl rm_int07 +.hidden rm_int07 +.type rm_int07, @function rm_int07: pushw $7 jmp any_interrupt16 .globl rm_int08 +.hidden rm_int08 +.type rm_int08, @function rm_int08: pushw $8 jmp any_interrupt16 .globl rm_int09 +.hidden rm_int09 +.type rm_int09, @function rm_int09: pushw $9 jmp any_interrupt16 .globl rm_int0a +.hidden rm_int0a +.type rm_int0a, @function rm_int0a: pushw $10 jmp any_interrupt16 .globl rm_int0b +.hidden rm_int0b +.type rm_int0b, @function rm_int0b: pushw $11 jmp any_interrupt16 .globl rm_int0c +.hidden rm_int0c +.type rm_int0c, @function rm_int0c: pushw $12 jmp any_interrupt16 .globl rm_int0d +.hidden rm_int0d +.type rm_int0d, @function rm_int0d: pushw $13 jmp any_interrupt16 .globl rm_int0e +.hidden rm_int0e +.type rm_int0e, @function rm_int0e: pushw $14 jmp any_interrupt16 .globl rm_int0f +.hidden rm_int0f +.type rm_int0f, @function rm_int0f: pushw $15 jmp any_interrupt16 .globl rm_int10 +.hidden rm_int10 +.type rm_int10, @function rm_int10: pushw $16 jmp any_interrupt16 .globl rm_int11 +.hidden rm_int11 +.type rm_int11, @function rm_int11: pushw $17 jmp any_interrupt16 .globl rm_int12 +.hidden rm_int12 +.type rm_int12, @function rm_int12: pushw $18 jmp any_interrupt16 .globl rm_int13 +.hidden rm_int13 +.type rm_int13, @function rm_int13: pushw $19 jmp any_interrupt16 .globl rm_int14 +.hidden rm_int14 +.type rm_int14, @function rm_int14: pushw $20 jmp any_interrupt16 .globl rm_int15 +.hidden rm_int15 +.type rm_int15, @function rm_int15: pushw $21 jmp any_interrupt16 .globl rm_int16 +.hidden rm_int16 +.type rm_int16, @function rm_int16: pushw $22 jmp any_interrupt16 .globl rm_int17 +.hidden rm_int17 +.type rm_int17, @function rm_int17: pushw $23 jmp any_interrupt16 .globl rm_int18 +.hidden rm_int18 +.type rm_int18, @function rm_int18: pushw $24 jmp any_interrupt16 .globl rm_int19 +.hidden rm_int19 +.type rm_int19, @function rm_int19: pushw $25 jmp any_interrupt16 .globl rm_int1a +.hidden rm_int1a +.type rm_int1a, @function rm_int1a: pushw $26 jmp any_interrupt16 .globl rm_int1b +.hidden rm_int1b +.type rm_int1b, @function rm_int1b: pushw $27 jmp any_interrupt16 .globl rm_int1c +.hidden rm_int1c +.type rm_int1c, @function rm_int1c: pushw $28 jmp any_interrupt16 .globl rm_int1d +.hidden rm_int1d +.type rm_int1d, @function rm_int1d: pushw $29 jmp any_interrupt16 .globl rm_int1e +.hidden rm_int1e +.type rm_int1e, @function rm_int1e: pushw $30 jmp any_interrupt16 .globl rm_int1f +.hidden rm_int1f +.type rm_int1f, @function rm_int1f: pushw $31 jmp any_interrupt16 .globl rm_def_int +.hidden rm_def_int +.type rm_def_int, @function rm_def_int: iret @@ -454,9 +520,13 @@ Lfunc_b1h: .globl ram_in_64kb_chunks +.hidden ram_in_64kb_chunks +.type ram_in_64kb_chunks, @function ram_in_64kb_chunks: .word 0 .globl bios_equipment +.hidden bios_equipment +.type bios_equipment, @function bios_equipment: .word 0 diff --git a/lib_i386/bios_pci.S b/lib_i386/bios_pci.S index 67fd00b83..9e412e5e4 100644 --- a/lib_i386/bios_pci.S +++ b/lib_i386/bios_pci.S @@ -34,6 +34,8 @@ .section .bios, "ax" .code16 .globl realmode_pci_bios_call_entry +.hidden realmode_pci_bios_call_entry +.type realmode_pci_bios_call_entry, @function realmode_pci_bios_call_entry: MAKE_BIOS_STACK call realmode_pci_bios -- cgit v1.2.3 From 1c409bc7101a24ecd47a13a4e851845d66dc23ce Mon Sep 17 00:00:00 2001 From: Graeme Russ Date: Tue, 24 Nov 2009 20:04:21 +1100 Subject: i386: Final Relocation Signed-off-by: Graeme Russ --- board/eNET/config.mk | 2 + board/eNET/eNET.c | 11 ++- board/eNET/u-boot.lds | 34 +++++++-- cpu/i386/cpu.c | 8 ++- cpu/i386/interrupts.c | 4 +- cpu/i386/start.S | 132 ++++------------------------------ include/asm-i386/u-boot-i386.h | 14 +--- include/configs/eNET.h | 2 + lib_i386/board.c | 157 +++++++++++++++++++++++------------------ lib_i386/interrupts.c | 4 +- lib_i386/timer.c | 2 +- 11 files changed, 158 insertions(+), 212 deletions(-) (limited to 'board') diff --git a/board/eNET/config.mk b/board/eNET/config.mk index c9703ea8e..5c64804fb 100644 --- a/board/eNET/config.mk +++ b/board/eNET/config.mk @@ -23,4 +23,6 @@ TEXT_BASE = 0x38040000 CFLAGS_dlmalloc.o += -Wa,--no-warn -fno-strict-aliasing +PLATFORM_RELFLAGS += -fvisibility=hidden PLATFORM_CPPFLAGS += -fno-dwarf2-cfi-asm +PLATFORM_LDFLAGS += -pic --emit-relocs -Bsymbolic -Bsymbolic-functions diff --git a/board/eNET/eNET.c b/board/eNET/eNET.c index 29cf29518..6d0b15a0f 100644 --- a/board/eNET/eNET.c +++ b/board/eNET/eNET.c @@ -47,7 +47,6 @@ void init_sc520_enet (void) { /* Set CPU Speed to 100MHz */ sc520_mmcr->cpuctl = 0x01; - gd->cpu_clk = 100000000; /* wait at least one millisecond */ asm("movl $0x2000,%%ecx\n" @@ -67,7 +66,7 @@ void init_sc520_enet (void) /* * Miscellaneous platform dependent initializations */ -int board_init(void) +int board_early_init_f(void) { init_sc520_enet(); @@ -117,6 +116,14 @@ int board_init(void) sc520_mmcr->sysarbctl = 0x06; sc520_mmcr->sysarbmenb = 0x0003; + return 0; +} + +int board_early_init_r(void) +{ + /* CPU Speed to 100MHz */ + gd->cpu_clk = 100000000; + /* Crystal is 33.000MHz */ gd->bus_clk = 33000000; diff --git a/board/eNET/u-boot.lds b/board/eNET/u-boot.lds index 4ea424d32..0d740215c 100644 --- a/board/eNET/u-boot.lds +++ b/board/eNET/u-boot.lds @@ -28,28 +28,48 @@ ENTRY(_start) SECTIONS { . = 0x38040000; /* Location of bootcode in flash */ + _i386boot_text_start = .; .text : { *(.text); } . = ALIGN(4); .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } _i386boot_text_size = SIZEOF(.text) + SIZEOF(.rodata); + . = ALIGN(4); + + .data : { *(.data) } + . = ALIGN(4); + + .interp : { *(.interp) } + . = ALIGN(4); + + .dynsym : { *(.dynsym) } + . = ALIGN(4); - . = 0x03FF0000; /* Ram data segment to use */ - _i386boot_romdata_dest = ABSOLUTE(.); - .data : AT ( LOADADDR(.rodata) + SIZEOF(.rodata) ) { *(.data) } - _i386boot_romdata_start = LOADADDR(.data); + .dynstr : { *(.dynstr) } + . = ALIGN(4); + + .hash : { *(.hash) } + . = ALIGN(4); + .got : { *(.got) } . = ALIGN(4); - .got : AT ( LOADADDR(.data) + SIZEOF(.data) ) { *(.got) } + .got.plt : { *(.got.plt) } . = ALIGN(4); + + .dynamic (NOLOAD) : { *(.dynamic) } + . = ALIGN(4); + __u_boot_cmd_start = .; .u_boot_cmd : { *(.u_boot_cmd) } + . = ALIGN(4); __u_boot_cmd_end = .; _i386boot_cmd_start = LOADADDR(.u_boot_cmd); - _i386boot_romdata_size = SIZEOF(.data) + SIZEOF(.got) + SIZEOF(.u_boot_cmd); + _i386boot_rel_dyn_start = .; + .rel.dyn : { *(.rel.dyn) } + _i386boot_rel_dyn_end = .; . = ALIGN(4); _i386boot_bss_start = ABSOLUTE(.); @@ -57,7 +77,7 @@ SECTIONS _i386boot_bss_size = SIZEOF(.bss); /* 16bit realmode trampoline code */ - .realmode 0x7c0 : AT ( LOADADDR(.got) + SIZEOF(.got) + SIZEOF(.u_boot_cmd)) { *(.realmode) } + .realmode 0x7c0 : AT ( LOADADDR(.rel.dyn) + SIZEOF(.rel.dyn) ) { *(.realmode) } _i386boot_realmode = LOADADDR(.realmode); _i386boot_realmode_size = SIZEOF(.realmode); diff --git a/cpu/i386/cpu.c b/cpu/i386/cpu.c index 4b681057a..3010519e7 100644 --- a/cpu/i386/cpu.c +++ b/cpu/i386/cpu.c @@ -37,7 +37,7 @@ #include #include -int cpu_init(void) +int cpu_init_f(void) { /* initialize FPU, reset EM, set MP and NE */ asm ("fninit\n" \ @@ -46,9 +46,13 @@ int cpu_init(void) "orl $0x22, %eax\n" \ "movl %eax, %cr0\n" ); + return 0; +} + +int cpu_init_r(void) +{ /* Initialize core interrupt and exception functionality of CPU */ cpu_init_interrupts (); - return 0; } diff --git a/cpu/i386/interrupts.c b/cpu/i386/interrupts.c index cbf1c41e1..4b5743719 100644 --- a/cpu/i386/interrupts.c +++ b/cpu/i386/interrupts.c @@ -63,8 +63,8 @@ static inline void load_idt(const struct desc_ptr *dtr) void set_vector(u8 intnum, void *routine) { - idt[intnum].base_high = (u16)((u32)(routine + gd->reloc_off) >> 16); - idt[intnum].base_low = (u16)((u32)(routine + gd->reloc_off) & 0xffff); + idt[intnum].base_high = (u16)((u32)(routine) >> 16); + idt[intnum].base_low = (u16)((u32)(routine) & 0xffff); } void irq_0(void); diff --git a/cpu/i386/start.S b/cpu/i386/start.S index 59089ef59..25d32e658 100644 --- a/cpu/i386/start.S +++ b/cpu/i386/start.S @@ -63,11 +63,8 @@ early_board_init_ret: jmp mem_init mem_init_ret: - /* check ammount of configured memory - * (we need atleast bss start+bss size+stack size) */ - movl $_i386boot_bss_start, %ecx /* BSS start */ - addl $_i386boot_bss_size, %ecx /* BSS size */ - addl $CONFIG_SYS_STACK_SIZE, %ecx + /* Check we have enough memory for stack */ + movl $CONFIG_SYS_STACK_SIZE, %ecx cmpl %ecx, %eax jae mem_ok @@ -78,6 +75,8 @@ mem_init_ret: .progress0a: jmp die mem_ok: + /* Set stack pointer to upper memory limit*/ + movl %eax, %esp /* indicate progress */ movw $0x02, %ax @@ -85,12 +84,7 @@ mem_ok: jmp show_boot_progress_asm .progress1: - /* create a stack after the bss */ - movl $_i386boot_bss_start, %eax - addl $_i386boot_bss_size, %eax - addl $CONFIG_SYS_STACK_SIZE, %eax - movl %eax, %esp - + /* Test the stack */ pushl $0 popl %eax cmpl $0, %eax @@ -116,115 +110,19 @@ stack_ok: jmp show_boot_progress_asm .progress2: - /* copy data section to ram, size must be 4-byte aligned */ - movl $_i386boot_romdata_dest, %edi /* destination address */ - movl $_i386boot_romdata_start, %esi /* source address */ - movl $_i386boot_romdata_size, %ecx /* number of bytes to copy */ - movl %ecx, %eax - andl $3, %eax - jnz data_fail - - shrl $2, %ecx /* copy 4 byte each time */ - cld - cmpl $0, %ecx - je data_ok -data_segment: - movsl - loop data_segment - jmp data_ok -data_fail: - /* indicate (lack of) progress */ - movw $0x83, %ax - movl $.progress2a, %ebp - jmp show_boot_progress_asm -.progress2a: - jmp die - -data_ok: - - /* indicate progress */ - movw $0x04, %ax - movl $.progress3, %ebp - jmp show_boot_progress_asm -.progress3: - - /* clear bss section in ram, size must be 4-byte aligned */ - movl $_i386boot_bss_start, %edi /* MK_CHG BSS start */ - movl $_i386boot_bss_size, %ecx /* BSS size */ - movl %ecx, %eax - andl $3, %eax - jnz bss_fail - shrl $2, %ecx /* clear 4 byte each time */ - cld - cmpl $0, %ecx - je bss_ok -bss: - movl $0, (%edi) - add $4, %edi - loop bss - jmp bss_ok - -bss_fail: - /* indicate (lack of) progress */ - movw $0x84, %ax - movl $.progress3a, %ebp - jmp show_boot_progress_asm -.progress3a: - jmp die - -bss_ok: -#ifndef CONFIG_SKIP_RELOCATE_UBOOT - /* indicate progress */ - movw $0x06, %ax - movl $.progress6, %ebp - jmp show_boot_progress_asm -.progress6: - - /* copy text section to ram, size must be 4-byte aligned */ - movl $CONFIG_SYS_BL_START_RAM, %edi /* destination address */ - movl $TEXT_BASE, %esi /* source address */ - movl $_i386boot_text_size, %ecx /* number of bytes to copy */ - movl %ecx, %eax - andl $3, %eax - jz text_copy /* Already 4-byte aligned */ - subl $4, %eax /* Add extra bytes to size */ - addl %eax, %ecx -text_copy: - shrl $2, %ecx /* copy 4 byte each time */ - cld - cmpl $0, %ecx - je text_ok -text_segment: - movsl - loop text_segment - jmp text_ok -text_fail: - /* indicate (lack of) progress */ - movw $0x86, %ax - movl $.progress5a, %ebp - jmp show_boot_progress_asm -.progress5a: - jmp die - -text_ok: -#endif wbinvd + /* Get upper memory limit */ + movl %esp, %ecx + subl $CONFIG_SYS_STACK_SIZE, %ecx - /* indicate progress */ - movw $0x05, %ax - movl $.progress4, %ebp - jmp show_boot_progress_asm -.progress4: - -#ifndef CONFIG_SKIP_RELOCATE_UBOOT - /* Jump to the RAM copy of start_i386boot */ - movl $start_i386boot, %ebp - addl $(CONFIG_SYS_BL_START_RAM - TEXT_BASE), %ebp - call *%ebp /* Enter, U-boot! */ -#else - call start_i386boot /* Enter, U-boot! */ -#endif + /* Create a Stack Frame */ + pushl %ebp + movl %esp, %ebp + + /* stack_limit parameter */ + pushl %ecx + call board_init_f /* Enter, U-boot! */ /* indicate (lack of) progress */ movw $0x85, %ax diff --git a/include/asm-i386/u-boot-i386.h b/include/asm-i386/u-boot-i386.h index 1e8def77d..7c99c8c57 100644 --- a/include/asm-i386/u-boot-i386.h +++ b/include/asm-i386/u-boot-i386.h @@ -24,19 +24,9 @@ #ifndef _U_BOOT_I386_H_ #define _U_BOOT_I386_H_ 1 -/* for the following variables, see start.S */ -extern ulong i386boot_start; /* code start (in flash) */ -extern ulong i386boot_end; /* code end (in flash) */ -extern ulong i386boot_romdata_start;/* datasegment in flash (also code+rodata end) */ -extern ulong i386boot_romdata_dest; /* data location segment in ram */ -extern ulong i386boot_romdata_size; /* size of data segment */ -extern ulong i386boot_bss_start; /* bss start */ -extern ulong i386boot_bss_size; /* bss size */ -extern ulong i386boot_stack_end; /* first usable RAM address after bss and stack */ -extern ulong i386boot_ram_end; /* end of ram */ - /* cpu/.../cpu.c */ -int cpu_init(void); +int cpu_init_r(void); +int cpu_init_f(void); /* cpu/.../timer.c */ void timer_isr(void *); diff --git a/include/configs/eNET.h b/include/configs/eNET.h index 0a8655086..6a68bf493 100644 --- a/include/configs/eNET.h +++ b/include/configs/eNET.h @@ -28,6 +28,8 @@ #ifndef __CONFIG_H #define __CONFIG_H +#define CONFIG_RELOC_FIXUP_WORKS + /* * Stuff still to be dealt with - */ diff --git a/lib_i386/board.c b/lib_i386/board.c index 44fa0e31a..f3b634855 100644 --- a/lib_i386/board.c +++ b/lib_i386/board.c @@ -38,6 +38,7 @@ #include #include #include +#include #ifdef CONFIG_BITBANGMII #include @@ -45,41 +46,16 @@ DECLARE_GLOBAL_DATA_PTR; -extern long _i386boot_start; -extern long _i386boot_end; -extern long _i386boot_romdata_start; -extern long _i386boot_romdata_dest; -extern long _i386boot_romdata_size; -extern long _i386boot_bss_start; -extern long _i386boot_bss_size; - -/* The symbols defined by the linker script becomes pointers - * which is somewhat inconveient ... */ -ulong i386boot_start = (ulong)&_i386boot_start; /* code start (in flash) defined in start.S */ -ulong i386boot_end = (ulong)&_i386boot_end; /* code end (in flash) */ -ulong i386boot_romdata_start = (ulong)&_i386boot_romdata_start; /* datasegment in flash (also code+rodata end) */ -ulong i386boot_romdata_dest = (ulong)&_i386boot_romdata_dest; /* data location segment in ram */ -ulong i386boot_romdata_size = (ulong)&_i386boot_romdata_size; /* size of data segment */ -ulong i386boot_bss_start = (ulong)&_i386boot_bss_start; /* bss start */ -ulong i386boot_bss_size = (ulong)&_i386boot_bss_size; /* bss size */ - +/* Exports from the Linker Script */ +extern ulong _i386boot_text_start; +extern ulong _i386boot_rel_dyn_start; +extern ulong _i386boot_rel_dyn_end; +extern ulong _i386boot_bss_start; +extern ulong _i386boot_bss_size; +void ram_bootstrap (void *); const char version_string[] = U_BOOT_VERSION" (" U_BOOT_DATE " - " U_BOOT_TIME ")"; -static int heap_init(void) -{ - /* start malloc area right after the stack */ - ulong start = i386boot_bss_start + i386boot_bss_size + - CONFIG_SYS_STACK_SIZE; - - /* 4-byte aligned */ - start = (start+3)&~3; - - mem_malloc_init(start, CONFIG_SYS_MALLOC_LEN); - - return 0; -} - /************************************************************************ * Init Utilities * ************************************************************************ @@ -103,6 +79,7 @@ static int display_banner (void) { printf ("\n\n%s\n\n", version_string); +/* printf ("U-Boot code: %08lX -> %08lX data: %08lX -> %08lX\n" " BSS: %08lX -> %08lX stack: %08lX -> %08lX\n", i386boot_start, i386boot_romdata_start-1, @@ -111,6 +88,7 @@ static int display_banner (void) i386boot_bss_start+i386boot_bss_size, i386boot_bss_start+i386boot_bss_size+CONFIG_SYS_STACK_SIZE-1); +*/ return (0); } @@ -142,7 +120,6 @@ static void display_flash_config (ulong size) print_size (size, "\n"); } - /* * Breath some life into the board... * @@ -154,6 +131,7 @@ static void display_flash_config (ulong size) * can relocate the monitor code to RAM. */ + /* * All attempts to come up with a "common" initialization sequence * that works for all boards and architectures failed: some of the @@ -169,13 +147,12 @@ static void display_flash_config (ulong size) typedef int (init_fnc_t) (void); init_fnc_t *init_sequence[] = { - cpu_init, /* basic cpu dependent setup */ - board_init, /* basic board dependent setup */ + serial_init, + cpu_init_r, /* basic cpu dependent setup */ + board_early_init_r, /* basic board dependent setup */ dram_init, /* configure available RAM banks */ - heap_init, /* dependant on dram_init */ interrupt_init, /* set up exceptions */ timer_init, - serial_init, env_init, /* initialize environment */ init_baudrate, /* initialze baudrate settings */ serial_init, /* serial communications setup */ @@ -187,21 +164,86 @@ init_fnc_t *init_sequence[] = { gd_t *gd; -void start_i386boot (void) +/* + * Load U-Boot into RAM, initialize BSS, perform relocation adjustments + */ +void board_init_f (ulong stack_limit) +{ + void *text_start = &_i386boot_text_start; + void *u_boot_cmd_end = &__u_boot_cmd_end; + Elf32_Rel *rel_dyn_start = (Elf32_Rel *)&_i386boot_rel_dyn_start; + Elf32_Rel *rel_dyn_end = (Elf32_Rel *)&_i386boot_rel_dyn_end; + void *bss_start = &_i386boot_bss_start; + void *bss_size = &_i386boot_bss_size; + + size_t uboot_size; + void *ram_start; + ulong rel_offset; + Elf32_Rel *re; + + void (*start_func)(void *); + + /* compiler optimization barrier needed for GCC >= 3.4 */ + __asm__ __volatile__("": : :"memory"); + + uboot_size = (size_t)u_boot_cmd_end - (size_t)text_start; + ram_start = (void *)stack_limit - (uboot_size + (ulong)bss_size); + rel_offset = text_start - ram_start; + start_func = ram_bootstrap - rel_offset; + + /* First stage CPU initialization */ + if (cpu_init_f() != 0) + hang(); + + /* First stage Board initialization */ + if (board_early_init_f() != 0) + hang(); + + /* Copy U-Boot into RAM */ + memcpy(ram_start, text_start, (size_t)uboot_size); + + /* Clear BSS */ + memset(bss_start - rel_offset, 0, (size_t)bss_size); + + /* Perform relocation adjustments */ + for (re = rel_dyn_start; re < rel_dyn_end; re++) + { + if (re->r_offset >= TEXT_BASE) + if (*(ulong *)re->r_offset >= TEXT_BASE) + *(ulong *)(re->r_offset - rel_offset) -= (Elf32_Addr)rel_offset; + } + + start_func(ram_start); + + /* NOTREACHED - relocate_code() does not return */ + while(1); +} + +/* + * All attempts to jump straight from board_init_f() to board_init_r() + * have failed, hence this special 'bootstrap' function. + */ +void ram_bootstrap (void *ram_start) +{ + static gd_t gd_data; + + /* compiler optimization barrier needed for GCC >= 3.4 */ + __asm__ __volatile__("": : :"memory"); + + board_init_r(&gd_data, (ulong)ram_start); +} + +void board_init_r(gd_t *id, ulong ram_start) { char *s; int i; ulong size; - static gd_t gd_data; static bd_t bd_data; init_fnc_t **init_fnc_ptr; -#ifndef CONFIG_SKIP_RELOCATE_UBOOT - cmd_tbl_t *p; -#endif show_boot_progress(0x21); - gd = &gd_data; + gd = id; /* compiler optimization barrier needed for GCC >= 3.4 */ __asm__ __volatile__("": : :"memory"); @@ -212,10 +254,11 @@ void start_i386boot (void) gd->baudrate = CONFIG_BAUDRATE; -#ifndef CONFIG_SKIP_RELOCATE_UBOOT - /* Need to set relocation offset here for interrupt initialization */ - gd->reloc_off = CONFIG_SYS_BL_START_RAM - TEXT_BASE; -#endif + gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */ + + mem_malloc_init((((ulong)ram_start - CONFIG_SYS_MALLOC_LEN)+3)&~3, + CONFIG_SYS_MALLOC_LEN); + for (init_fnc_ptr = init_sequence, i=0; *init_fnc_ptr; ++init_fnc_ptr, i++) { show_boot_progress(0xa130|i); @@ -225,26 +268,6 @@ void start_i386boot (void) } show_boot_progress(0x23); -#ifndef CONFIG_SKIP_RELOCATE_UBOOT - for (p = &__u_boot_cmd_start; p != &__u_boot_cmd_end; p++) { - ulong addr; - addr = (ulong) (p->cmd) + gd->reloc_off; - p->cmd = (int (*)(struct cmd_tbl_s *, int, int, char *[]))addr; - addr = (ulong)(p->name) + gd->reloc_off; - p->name = (char *)addr; - - if (p->usage != NULL) { - addr = (ulong)(p->usage) + gd->reloc_off; - p->usage = (char *)addr; - } - #ifdef CONFIG_SYS_LONGHELP - if (p->help != NULL) { - addr = (ulong)(p->help) + gd->reloc_off; - p->help = (char *)addr; - } - #endif - } -#endif /* configure available FLASH banks */ size = flash_init(); display_flash_config(size); diff --git a/lib_i386/interrupts.c b/lib_i386/interrupts.c index efbad7220..51def5995 100644 --- a/lib_i386/interrupts.c +++ b/lib_i386/interrupts.c @@ -70,12 +70,12 @@ void irq_install_handler(int irq, interrupt_handler_t *handler, void *arg) if (irq_handlers[irq].handler != NULL) printf("irq_install_handler: 0x%08lx replacing 0x%08lx\n", - (ulong) handler + gd->reloc_off, + (ulong) handler, (ulong) irq_handlers[irq].handler); status = disable_interrupts (); - irq_handlers[irq].handler = handler + gd->reloc_off; + irq_handlers[irq].handler = handler; irq_handlers[irq].arg = arg; irq_handlers[irq].count = 0; diff --git a/lib_i386/timer.c b/lib_i386/timer.c index 58a0212ad..5cb1f54fb 100644 --- a/lib_i386/timer.c +++ b/lib_i386/timer.c @@ -51,7 +51,7 @@ int register_timer_isr (timer_fnc_t *isr_func) if (new_func == NULL) return 1; - new_func->isr_func = isr_func + gd->reloc_off; + new_func->isr_func = isr_func; new_func->next = NULL; /* -- cgit v1.2.3 From 3eb90bad651fab39cffba750ec4421a9c01d60e7 Mon Sep 17 00:00:00 2001 From: Ingo van Lil Date: Tue, 24 Nov 2009 14:09:21 +0100 Subject: Generic udelay() with watchdog support According to the PPC reference implementation the udelay() function is responsible for resetting the watchdog timer as frequently as needed. Most other architectures do not meet that requirement, so long-running operations might result in a watchdog reset. This patch adds a generic udelay() function which takes care of resetting the watchdog before calling an architecture-specific __udelay(). Signed-off-by: Ingo van Lil --- board/armltd/integrator/timer.c | 2 +- board/freescale/mpc8313erdb/sdram.c | 2 +- cpu/arm1136/mx31/timer.c | 2 +- cpu/arm1136/omap24xx/timer.c | 2 +- cpu/arm1176/s3c64xx/timer.c | 2 +- cpu/arm720t/interrupts.c | 4 ++-- cpu/arm920t/at91rm9200/timer.c | 2 +- cpu/arm920t/imx/timer.c | 2 +- cpu/arm920t/ks8695/timer.c | 2 +- cpu/arm920t/s3c24x0/timer.c | 2 +- cpu/arm925t/timer.c | 2 +- cpu/arm926ejs/at91/timer.c | 2 +- cpu/arm926ejs/davinci/timer.c | 2 +- cpu/arm926ejs/kirkwood/timer.c | 2 +- cpu/arm926ejs/mx27/timer.c | 2 +- cpu/arm926ejs/nomadik/timer.c | 2 +- cpu/arm926ejs/omap/timer.c | 2 +- cpu/arm926ejs/versatile/timer.c | 2 +- cpu/arm_cortexa8/omap3/timer.c | 2 +- cpu/arm_cortexa8/s5pc1xx/timer.c | 2 +- cpu/at32ap/interrupts.c | 2 +- cpu/blackfin/interrupts.c | 2 +- cpu/i386/sc520/sc520_timer.c | 2 +- cpu/ixp/start.S | 4 ++-- cpu/ixp/timer.c | 2 +- cpu/lh7a40x/timer.c | 2 +- cpu/mcf547x_8x/slicetimer.c | 2 +- cpu/pxa/timer.c | 2 +- cpu/s3c44b0/timer.c | 2 +- cpu/sa1100/timer.c | 2 +- examples/api/Makefile | 1 + examples/api/libgenwrap.c | 2 +- include/asm-blackfin/delay.h | 2 +- include/common.h | 5 ++++- include/exports.h | 2 +- lib_generic/Makefile | 1 + lib_generic/time.c | 43 +++++++++++++++++++++++++++++++++++++ lib_i386/pcat_timer.c | 2 +- lib_m68k/time.c | 4 ++-- lib_microblaze/time.c | 4 ++-- lib_mips/time.c | 2 +- lib_nios/time.c | 3 +-- lib_nios2/time.c | 3 +-- lib_ppc/time.c | 16 +++----------- lib_sh/time.c | 2 +- lib_sh/time_sh2.c | 2 +- lib_sparc/time.c | 2 +- 47 files changed, 98 insertions(+), 62 deletions(-) create mode 100644 lib_generic/time.c (limited to 'board') diff --git a/board/armltd/integrator/timer.c b/board/armltd/integrator/timer.c index 087cf5962..7562ffa87 100644 --- a/board/armltd/integrator/timer.c +++ b/board/armltd/integrator/timer.c @@ -124,7 +124,7 @@ void set_timer (ulong ticks) } /* delay usec useconds */ -void udelay (unsigned long usec) +void __udelay (unsigned long usec) { ulong tmo, tmp; diff --git a/board/freescale/mpc8313erdb/sdram.c b/board/freescale/mpc8313erdb/sdram.c index cb138296b..0c4fd6854 100644 --- a/board/freescale/mpc8313erdb/sdram.c +++ b/board/freescale/mpc8313erdb/sdram.c @@ -72,7 +72,7 @@ static long fixed_sdram(void) * Erratum DDR3 requires a 50ms delay after clearing DDRCDR[DDR_cfg], * or the DDR2 controller may fail to initialize correctly. */ - udelay(50000); + __udelay(50000); im->ddr.csbnds[0].csbnds = (msize - 1) >> 24; im->ddr.cs_config[0] = CONFIG_SYS_DDR_CONFIG; diff --git a/cpu/arm1136/mx31/timer.c b/cpu/arm1136/mx31/timer.c index 29b484e44..7972ba0dd 100644 --- a/cpu/arm1136/mx31/timer.c +++ b/cpu/arm1136/mx31/timer.c @@ -152,7 +152,7 @@ void set_timer (ulong t) } /* delay x useconds AND perserve advance timstamp value */ -void udelay (unsigned long usec) +void __udelay (unsigned long usec) { unsigned long long tmp; ulong tmo; diff --git a/cpu/arm1136/omap24xx/timer.c b/cpu/arm1136/omap24xx/timer.c index 8dd8d7b00..67547490f 100644 --- a/cpu/arm1136/omap24xx/timer.c +++ b/cpu/arm1136/omap24xx/timer.c @@ -74,7 +74,7 @@ void set_timer (ulong t) } /* delay x useconds AND perserve advance timstamp value */ -void udelay (unsigned long usec) +void __udelay (unsigned long usec) { ulong tmo, tmp; diff --git a/cpu/arm1176/s3c64xx/timer.c b/cpu/arm1176/s3c64xx/timer.c index 85ce9cd99..9768319ef 100644 --- a/cpu/arm1176/s3c64xx/timer.c +++ b/cpu/arm1176/s3c64xx/timer.c @@ -164,7 +164,7 @@ void set_timer(ulong t) timestamp = t * (timer_load_val / (100 * CONFIG_SYS_HZ)); } -void udelay(unsigned long usec) +void __udelay(unsigned long usec) { unsigned long long tmp; ulong tmo; diff --git a/cpu/arm720t/interrupts.c b/cpu/arm720t/interrupts.c index 91d552cd2..eb8d42531 100644 --- a/cpu/arm720t/interrupts.c +++ b/cpu/arm720t/interrupts.c @@ -224,7 +224,7 @@ void set_timer (ulong t) timestamp = t; } -void udelay (unsigned long usec) +void __udelay (unsigned long usec) { ulong tmo; @@ -296,7 +296,7 @@ ulong get_timer (ulong base) return timestamp - base; } -void udelay (unsigned long usec) +void __udelay (unsigned long usec) { u32 ticks; diff --git a/cpu/arm920t/at91rm9200/timer.c b/cpu/arm920t/at91rm9200/timer.c index 235d10738..9c54bbedb 100644 --- a/cpu/arm920t/at91rm9200/timer.c +++ b/cpu/arm920t/at91rm9200/timer.c @@ -87,7 +87,7 @@ void set_timer (ulong t) timestamp = t; } -void udelay (unsigned long usec) +void __udelay (unsigned long usec) { udelay_masked(usec); } diff --git a/cpu/arm920t/imx/timer.c b/cpu/arm920t/imx/timer.c index 31ec588d9..b06b518f0 100644 --- a/cpu/arm920t/imx/timer.c +++ b/cpu/arm920t/imx/timer.c @@ -89,7 +89,7 @@ void udelay_masked (unsigned long usec) } while (diff >= 0); } -void udelay (unsigned long usec) +void __udelay (unsigned long usec) { udelay_masked(usec); } diff --git a/cpu/arm920t/ks8695/timer.c b/cpu/arm920t/ks8695/timer.c index 22987bc48..886e37059 100644 --- a/cpu/arm920t/ks8695/timer.c +++ b/cpu/arm920t/ks8695/timer.c @@ -81,7 +81,7 @@ void set_timer(ulong t) timer_ticks = t; } -void udelay(ulong usec) +void __udelay(ulong usec) { ulong start = get_timer_masked(); ulong end; diff --git a/cpu/arm920t/s3c24x0/timer.c b/cpu/arm920t/s3c24x0/timer.c index cd06f6b58..fcc6c0cb1 100644 --- a/cpu/arm920t/s3c24x0/timer.c +++ b/cpu/arm920t/s3c24x0/timer.c @@ -99,7 +99,7 @@ void set_timer(ulong t) timestamp = t; } -void udelay(unsigned long usec) +void __udelay (unsigned long usec) { ulong tmo; ulong start = get_ticks(); diff --git a/cpu/arm925t/timer.c b/cpu/arm925t/timer.c index c16ef2577..7dfe2b564 100644 --- a/cpu/arm925t/timer.c +++ b/cpu/arm925t/timer.c @@ -81,7 +81,7 @@ void set_timer (ulong t) } /* delay x useconds AND preserve advance timestamp value */ -void udelay (unsigned long usec) +void __udelay (unsigned long usec) { int32_t tmo = usec * (TIMER_CLOCK / 1000) / 1000; uint32_t now, last = __raw_readl(CONFIG_SYS_TIMERBASE + READ_TIM); diff --git a/cpu/arm926ejs/at91/timer.c b/cpu/arm926ejs/at91/timer.c index 811bb3c59..7352b5c33 100644 --- a/cpu/arm926ejs/at91/timer.c +++ b/cpu/arm926ejs/at91/timer.c @@ -105,7 +105,7 @@ ulong get_timer_masked(void) return tick_to_time(get_ticks()); } -void udelay(unsigned long usec) +void __udelay(unsigned long usec) { unsigned long long tmp; ulong tmo; diff --git a/cpu/arm926ejs/davinci/timer.c b/cpu/arm926ejs/davinci/timer.c index 7c2c20825..9da7443f3 100644 --- a/cpu/arm926ejs/davinci/timer.c +++ b/cpu/arm926ejs/davinci/timer.c @@ -112,7 +112,7 @@ void set_timer(ulong t) timestamp = t; } -void udelay(unsigned long usec) +void __udelay(unsigned long usec) { ulong tmo; ulong endtime; diff --git a/cpu/arm926ejs/kirkwood/timer.c b/cpu/arm926ejs/kirkwood/timer.c index 817ff4284..2ec6a9380 100644 --- a/cpu/arm926ejs/kirkwood/timer.c +++ b/cpu/arm926ejs/kirkwood/timer.c @@ -125,7 +125,7 @@ void set_timer(ulong t) timestamp = t; } -void udelay(unsigned long usec) +void __udelay(unsigned long usec) { uint current; ulong delayticks; diff --git a/cpu/arm926ejs/mx27/timer.c b/cpu/arm926ejs/mx27/timer.c index 90110581e..8f1d47bba 100644 --- a/cpu/arm926ejs/mx27/timer.c +++ b/cpu/arm926ejs/mx27/timer.c @@ -177,7 +177,7 @@ void set_timer (ulong t) } /* delay x useconds AND preserve advance timstamp value */ -void udelay (unsigned long usec) +void __udelay (unsigned long usec) { unsigned long long tmp; ulong tmo; diff --git a/cpu/arm926ejs/nomadik/timer.c b/cpu/arm926ejs/nomadik/timer.c index 16067c900..047b9e351 100644 --- a/cpu/arm926ejs/nomadik/timer.c +++ b/cpu/arm926ejs/nomadik/timer.c @@ -59,7 +59,7 @@ ulong get_timer(ulong base) } /* Delay x useconds */ -void udelay(unsigned long usec) +void __udelay(unsigned long usec) { ulong ini, end; diff --git a/cpu/arm926ejs/omap/timer.c b/cpu/arm926ejs/omap/timer.c index 392b158d5..2ac38c40b 100644 --- a/cpu/arm926ejs/omap/timer.c +++ b/cpu/arm926ejs/omap/timer.c @@ -80,7 +80,7 @@ void set_timer (ulong t) } /* delay x useconds AND perserve advance timstamp value */ -void udelay (unsigned long usec) +void __udelay (unsigned long usec) { ulong tmo, tmp; diff --git a/cpu/arm926ejs/versatile/timer.c b/cpu/arm926ejs/versatile/timer.c index 50c13350a..563db3654 100755 --- a/cpu/arm926ejs/versatile/timer.c +++ b/cpu/arm926ejs/versatile/timer.c @@ -109,7 +109,7 @@ void set_timer (ulong t) } /* delay x useconds AND perserve advance timstamp value */ -void udelay (unsigned long usec) +void __udelay (unsigned long usec) { ulong tmo, tmp; diff --git a/cpu/arm_cortexa8/omap3/timer.c b/cpu/arm_cortexa8/omap3/timer.c index 12a16b321..401bfe6d0 100644 --- a/cpu/arm_cortexa8/omap3/timer.c +++ b/cpu/arm_cortexa8/omap3/timer.c @@ -82,7 +82,7 @@ void set_timer(ulong t) } /* delay x useconds */ -void udelay(unsigned long usec) +void __udelay(unsigned long usec) { long tmo = usec * (TIMER_CLOCK / 1000) / 1000; unsigned long now, last = readl(&timer_base->tcrr); diff --git a/cpu/arm_cortexa8/s5pc1xx/timer.c b/cpu/arm_cortexa8/s5pc1xx/timer.c index cdba5d934..c5df5c5ab 100644 --- a/cpu/arm_cortexa8/s5pc1xx/timer.c +++ b/cpu/arm_cortexa8/s5pc1xx/timer.c @@ -115,7 +115,7 @@ void set_timer(unsigned long t) } /* delay x useconds */ -void udelay(unsigned long usec) +void __udelay(unsigned long usec) { unsigned long tmo, tmp; diff --git a/cpu/at32ap/interrupts.c b/cpu/at32ap/interrupts.c index 75cc39e94..c6d8d16e3 100644 --- a/cpu/at32ap/interrupts.c +++ b/cpu/at32ap/interrupts.c @@ -96,7 +96,7 @@ void set_timer(unsigned long t) /* * For short delays only. It will overflow after a few seconds. */ -void udelay(unsigned long usec) +void __udelay(unsigned long usec) { unsigned long cycles; unsigned long base; diff --git a/cpu/blackfin/interrupts.c b/cpu/blackfin/interrupts.c index 19456e5c1..921bfe0c0 100644 --- a/cpu/blackfin/interrupts.c +++ b/cpu/blackfin/interrupts.c @@ -64,7 +64,7 @@ int disable_interrupts(void) return 1; } -void udelay(unsigned long usec) +void __udelay(unsigned long usec) { unsigned long delay, start, stop; unsigned long cclk; diff --git a/cpu/i386/sc520/sc520_timer.c b/cpu/i386/sc520/sc520_timer.c index 25c9a24b7..93b5b555c 100644 --- a/cpu/i386/sc520/sc520_timer.c +++ b/cpu/i386/sc520/sc520_timer.c @@ -68,7 +68,7 @@ int timer_init(void) return 0; } -void udelay(unsigned long usec) +void __udelay(unsigned long usec) { int m = 0; long u; diff --git a/cpu/ixp/start.S b/cpu/ixp/start.S index 196ba5db2..5ebce5338 100644 --- a/cpu/ixp/start.S +++ b/cpu/ixp/start.S @@ -505,8 +505,8 @@ reset_endless: /* * 0 <= r0 <= 2000 */ -.globl udelay -udelay: +.globl __udelay +__udelay: mov r2, #0x6800 orr r2, r2, #0x00db mul r0, r2, r0 diff --git a/cpu/ixp/timer.c b/cpu/ixp/timer.c index 685614966..edf341ff9 100644 --- a/cpu/ixp/timer.c +++ b/cpu/ixp/timer.c @@ -99,7 +99,7 @@ void ixp425_udelay(unsigned long usec) while (!(*IXP425_OSST & IXP425_OSST_TIMER_1_PEND)); } -void udelay (unsigned long usec) +void __udelay (unsigned long usec) { while (usec--) ixp425_udelay(1); } diff --git a/cpu/lh7a40x/timer.c b/cpu/lh7a40x/timer.c index f9b5be010..2691315d8 100644 --- a/cpu/lh7a40x/timer.c +++ b/cpu/lh7a40x/timer.c @@ -90,7 +90,7 @@ void set_timer (ulong t) timestamp = t; } -void udelay (unsigned long usec) +void __udelay (unsigned long usec) { ulong tmo,tmp; diff --git a/cpu/mcf547x_8x/slicetimer.c b/cpu/mcf547x_8x/slicetimer.c index 67e81894a..8dc010a35 100644 --- a/cpu/mcf547x_8x/slicetimer.c +++ b/cpu/mcf547x_8x/slicetimer.c @@ -40,7 +40,7 @@ static ulong timestamp; #endif extern void dtimer_intr_setup(void); -void udelay(unsigned long usec) +void __udelay(unsigned long usec) { volatile slt_t *timerp = (slt_t *) (CONFIG_SYS_UDELAY_BASE); u32 now, freq; diff --git a/cpu/pxa/timer.c b/cpu/pxa/timer.c index e2df3a57f..8d0f82679 100644 --- a/cpu/pxa/timer.c +++ b/cpu/pxa/timer.c @@ -78,7 +78,7 @@ void set_timer (ulong t) /* nop */ } -void udelay (unsigned long usec) +void __udelay (unsigned long usec) { udelay_masked (usec); } diff --git a/cpu/s3c44b0/timer.c b/cpu/s3c44b0/timer.c index 34184abb7..6f1d8f677 100644 --- a/cpu/s3c44b0/timer.c +++ b/cpu/s3c44b0/timer.c @@ -75,7 +75,7 @@ void set_timer (ulong t) timestamp = t; } -void udelay (unsigned long usec) +void __udelay (unsigned long usec) { ulong tmo; diff --git a/cpu/sa1100/timer.c b/cpu/sa1100/timer.c index 3f77e815c..020750125 100644 --- a/cpu/sa1100/timer.c +++ b/cpu/sa1100/timer.c @@ -49,7 +49,7 @@ void set_timer (ulong t) /* nop */ } -void udelay (unsigned long usec) +void __udelay (unsigned long usec) { udelay_masked (usec); } diff --git a/examples/api/Makefile b/examples/api/Makefile index 04a270b45..d4c5ca255 100644 --- a/examples/api/Makefile +++ b/examples/api/Makefile @@ -44,6 +44,7 @@ EXT_COBJ_FILES-$(CONFIG_API) += lib_generic/crc32.o EXT_COBJ_FILES-$(CONFIG_API) += lib_generic/ctype.o EXT_COBJ_FILES-$(CONFIG_API) += lib_generic/div64.o EXT_COBJ_FILES-$(CONFIG_API) += lib_generic/string.o +EXT_COBJ_FILES-$(CONFIG_API) += lib_generic/time.o EXT_COBJ_FILES-$(CONFIG_API) += lib_generic/vsprintf.o ifeq ($(ARCH),ppc) EXT_SOBJ_FILES-$(CONFIG_API) += lib_ppc/ppcstring.o diff --git a/examples/api/libgenwrap.c b/examples/api/libgenwrap.c index 2b62badfb..2b107d979 100644 --- a/examples/api/libgenwrap.c +++ b/examples/api/libgenwrap.c @@ -74,7 +74,7 @@ void putc (const char c) ub_putc(c); } -void udelay(unsigned long usec) +void __udelay(unsigned long usec) { ub_udelay(usec); } diff --git a/include/asm-blackfin/delay.h b/include/asm-blackfin/delay.h index ea0b3664e..3af6ad3e7 100644 --- a/include/asm-blackfin/delay.h +++ b/include/asm-blackfin/delay.h @@ -47,7 +47,7 @@ extern __inline__ void __delay(unsigned long loops) * first constant multiplications gets optimized away if the delay is * a constant) */ -extern __inline__ void udelay(unsigned long usecs) +extern __inline__ void __udelay(unsigned long usecs) { __delay(usecs); } diff --git a/include/common.h b/include/common.h index 30a4b7aff..749d35cab 100644 --- a/include/common.h +++ b/include/common.h @@ -607,11 +607,14 @@ unsigned long long get_ticks(void); void wait_ticks (unsigned long); /* lib_$(ARCH)/time.c */ -void udelay (unsigned long); +void __udelay (unsigned long); ulong usec2ticks (unsigned long usec); ulong ticks2usec (unsigned long ticks); int init_timebase (void); +/* lib_generic/time.c */ +void udelay (unsigned long); + /* lib_generic/vsprintf.c */ ulong simple_strtoul(const char *cp,char **endp,unsigned int base); #ifdef CONFIG_SYS_64BIT_VSPRINTF diff --git a/include/exports.h b/include/exports.h index 2e8fd8b8b..c3a5d2f32 100644 --- a/include/exports.h +++ b/include/exports.h @@ -16,7 +16,7 @@ void install_hdlr(int, interrupt_handler_t*, void*); void free_hdlr(int); void *malloc(size_t); void free(void*); -void udelay(unsigned long); +void __udelay(unsigned long); unsigned long get_timer(unsigned long); void vprintf(const char *, va_list); void do_reset (void); diff --git a/lib_generic/Makefile b/lib_generic/Makefile index 686601cc1..7291fa396 100644 --- a/lib_generic/Makefile +++ b/lib_generic/Makefile @@ -44,6 +44,7 @@ COBJS-y += sha1.o COBJS-$(CONFIG_SHA256) += sha256.o COBJS-y += string.o COBJS-y += strmhz.o +COBJS-y += time.o COBJS-y += vsprintf.o COBJS-y += zlib.o COBJS-$(CONFIG_RBTREE) += rbtree.o diff --git a/lib_generic/time.c b/lib_generic/time.c new file mode 100644 index 000000000..a309c2613 --- /dev/null +++ b/lib_generic/time.c @@ -0,0 +1,43 @@ +/* + * (C) Copyright 2000-2009 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +#ifndef CONFIG_WD_PERIOD +# define CONFIG_WD_PERIOD (10 * 1000 * 1000) /* 10 seconds default*/ +#endif + +/* ------------------------------------------------------------------------- */ + +void udelay(unsigned long usec) +{ + ulong kv; + + do { + WATCHDOG_RESET(); + kv = usec > CONFIG_WD_PERIOD ? CONFIG_WD_PERIOD : usec; + __udelay (kv); + usec -= kv; + } while(usec); +} diff --git a/lib_i386/pcat_timer.c b/lib_i386/pcat_timer.c index c351b23b6..1373fd125 100644 --- a/lib_i386/pcat_timer.c +++ b/lib_i386/pcat_timer.c @@ -71,7 +71,7 @@ static u16 read_pit(void) } /* this is not very exact */ -void udelay (unsigned long usec) +void __udelay (unsigned long usec) { int counter; int wraps; diff --git a/lib_m68k/time.c b/lib_m68k/time.c index 29269f655..7eaea5e7f 100644 --- a/lib_m68k/time.c +++ b/lib_m68k/time.c @@ -47,7 +47,7 @@ static volatile ulong timestamp = 0; #endif extern void dtimer_intr_setup(void); -void udelay(unsigned long usec) +void __udelay(unsigned long usec) { volatile dtmr_t *timerp = (dtmr_t *) (CONFIG_SYS_UDELAY_BASE); uint start, now, tmp; @@ -139,7 +139,7 @@ void set_timer(ulong t) static unsigned short lastinc; -void udelay(unsigned long usec) +void __udelay(unsigned long usec) { volatile pit_t *timerp = (pit_t *) (CONFIG_SYS_UDELAY_BASE); uint tmp; diff --git a/lib_microblaze/time.c b/lib_microblaze/time.c index cbb43414f..da016a001 100644 --- a/lib_microblaze/time.c +++ b/lib_microblaze/time.c @@ -27,14 +27,14 @@ #include #ifdef CONFIG_SYS_TIMER_0 -void udelay (unsigned long usec) +void __udelay (unsigned long usec) { int i; i = get_timer (0); while ((get_timer (0) - i) < (usec / 1000)) ; } #else -void udelay (unsigned long usec) +void __udelay (unsigned long usec) { unsigned int i; for (i = 0; i < (usec * CONFIG_XILINX_CLOCK_FREQ / 10000000); i++); diff --git a/lib_mips/time.c b/lib_mips/time.c index 07e356d23..0e6644149 100644 --- a/lib_mips/time.c +++ b/lib_mips/time.c @@ -70,7 +70,7 @@ void set_timer(ulong t) write_c0_compare(read_c0_count() + CYCLES_PER_JIFFY); } -void udelay(unsigned long usec) +void __udelay(unsigned long usec) { unsigned int tmo; diff --git a/lib_nios/time.c b/lib_nios/time.c index 25a233ea7..d5096ee12 100644 --- a/lib_nios/time.c +++ b/lib_nios/time.c @@ -27,13 +27,12 @@ extern void dly_clks( unsigned long ticks ); -void udelay(unsigned long usec) +void __udelay(unsigned long usec) { /* The Nios core doesn't have a timebase, so we do our * best for now and call a low-level loop that counts * cpu clocks. */ unsigned long cnt = (CONFIG_SYS_CLK_FREQ/1000000) * usec; - WATCHDOG_RESET (); /* trigger watchdog if needed */ dly_clks (cnt); } diff --git a/lib_nios2/time.c b/lib_nios2/time.c index 25a233ea7..d5096ee12 100644 --- a/lib_nios2/time.c +++ b/lib_nios2/time.c @@ -27,13 +27,12 @@ extern void dly_clks( unsigned long ticks ); -void udelay(unsigned long usec) +void __udelay(unsigned long usec) { /* The Nios core doesn't have a timebase, so we do our * best for now and call a low-level loop that counts * cpu clocks. */ unsigned long cnt = (CONFIG_SYS_CLK_FREQ/1000000) * usec; - WATCHDOG_RESET (); /* trigger watchdog if needed */ dly_clks (cnt); } diff --git a/lib_ppc/time.c b/lib_ppc/time.c index 173ffab3e..29099612d 100644 --- a/lib_ppc/time.c +++ b/lib_ppc/time.c @@ -23,10 +23,6 @@ #include -#ifndef CONFIG_WD_PERIOD -# define CONFIG_WD_PERIOD (10 * 1000 * 1000) /* 10 seconds default*/ -#endif - /* ------------------------------------------------------------------------- */ /* @@ -54,16 +50,10 @@ unsigned long usec2ticks(unsigned long usec) * microseconds to wait) into a number of time base ticks; then we * watch the time base until it has incremented by that amount. */ -void udelay(unsigned long usec) +void __udelay(unsigned long usec) { - ulong ticks, kv; - - do { - kv = usec > CONFIG_WD_PERIOD ? CONFIG_WD_PERIOD : usec; - ticks = usec2ticks (kv); - wait_ticks (ticks); - usec -= kv; - } while(usec); + ulong ticks = usec2ticks (usec); + wait_ticks (ticks); } /* ------------------------------------------------------------------------- */ diff --git a/lib_sh/time.c b/lib_sh/time.c index 52dbcd061..9a8f89aef 100644 --- a/lib_sh/time.c +++ b/lib_sh/time.c @@ -105,7 +105,7 @@ unsigned long long get_ticks (void) return 0 - readl(TCNT0); } -void udelay (unsigned long usec) +void __udelay (unsigned long usec) { unsigned long long tmp; ulong tmo; diff --git a/lib_sh/time_sh2.c b/lib_sh/time_sh2.c index 5c6c9d438..789b46f0e 100644 --- a/lib_sh/time_sh2.c +++ b/lib_sh/time_sh2.c @@ -103,7 +103,7 @@ void reset_timer(void) cmt_timer_start(0); } -void udelay(unsigned long usec) +void __udelay(unsigned long usec) { unsigned long end = get_usec() + usec; diff --git a/lib_sparc/time.c b/lib_sparc/time.c index 433f3eb5a..82b2a3abc 100644 --- a/lib_sparc/time.c +++ b/lib_sparc/time.c @@ -53,7 +53,7 @@ unsigned long usec2ticks(unsigned long usec) * microseconds to wait) into a number of time base ticks; then we * watch the time base until it has incremented by that amount. */ -void udelay(unsigned long usec) +void __udelay(unsigned long usec) { ulong ticks = usec2ticks(usec); -- cgit v1.2.3 From 39ff7d5f4cc547a2034a8bfc2a5b5f4b62fd5c20 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Thu, 3 Dec 2009 06:24:30 +0100 Subject: POST: Remove duplicated post_hotkey_pressed() functions This patch introduces a weak default function for post_hotkey_pressed(), returning 0, for boards without hotkey support. The long-running tests won't be started on those boards. This default function was implemented in many board directories. By implementing this weak default we can remove all those duplicate versions. Boards with hotkey support, can override this weak default function by defining one in their board specific code. Signed-off-by: Stefan Roese --- board/amcc/katmai/katmai.c | 11 ----------- board/amcc/kilauea/kilauea.c | 11 ----------- board/amcc/makalu/makalu.c | 11 ----------- board/amcc/ocotea/ocotea.c | 12 ------------ board/amcc/sequoia/sequoia.c | 11 ----------- board/amcc/taishan/taishan.c | 11 ----------- board/amcc/yucca/yucca.c | 11 ----------- board/cm5200/cm5200.c | 8 -------- board/esd/pmc440/pmc440.c | 11 ----------- board/gen860t/gen860t.c | 11 ----------- board/korat/korat.c | 11 ----------- board/kup/common/kup.c | 11 ----------- board/mpl/mip405/mip405.c | 11 ----------- board/netstal/hcu4/hcu4.c | 11 ----------- board/netstal/hcu5/hcu5.c | 11 ----------- board/netstal/mcu25/mcu25.c | 11 ----------- board/netta/netta.c | 11 ----------- board/prodrive/alpr/alpr.c | 12 ------------ board/sacsng/sacsng.c | 12 ------------ board/ssv/adnpesc1/adnpesc1.c | 11 ----------- board/uc100/uc100.c | 12 ------------ post/post.c | 16 ++++++++++++++++ 22 files changed, 16 insertions(+), 232 deletions(-) (limited to 'board') diff --git a/board/amcc/katmai/katmai.c b/board/amcc/katmai/katmai.c index 86dc923e7..54e2a39aa 100644 --- a/board/amcc/katmai/katmai.c +++ b/board/amcc/katmai/katmai.c @@ -279,17 +279,6 @@ int board_pcie_card_present(int port) } #endif /* defined(CONFIG_PCI) */ -#ifdef CONFIG_POST -/* - * Returns 1 if keys pressed to start the power-on long-running tests - * Called from board_init_f(). - */ -int post_hotkeys_pressed(void) -{ - return (ctrlc()); -} -#endif - int board_eth_init(bd_t *bis) { cpu_eth_init(bis); diff --git a/board/amcc/kilauea/kilauea.c b/board/amcc/kilauea/kilauea.c index 2f99ea113..8ce244555 100644 --- a/board/amcc/kilauea/kilauea.c +++ b/board/amcc/kilauea/kilauea.c @@ -284,14 +284,3 @@ int checkboard (void) return (0); } - -#if defined(CONFIG_POST) -/* - * Returns 1 if keys pressed to start the power-on long-running tests - * Called from board_init_f(). - */ -int post_hotkeys_pressed(void) -{ - return 0; /* No hotkeys supported */ -} -#endif /* CONFIG_POST */ diff --git a/board/amcc/makalu/makalu.c b/board/amcc/makalu/makalu.c index 3d860af9a..4afe09166 100644 --- a/board/amcc/makalu/makalu.c +++ b/board/amcc/makalu/makalu.c @@ -236,14 +236,3 @@ int checkboard (void) return (0); } - -#if defined(CONFIG_POST) -/* - * Returns 1 if keys pressed to start the power-on long-running tests - * Called from board_init_f(). - */ -int post_hotkeys_pressed(void) -{ - return 0; /* No hotkeys supported */ -} -#endif /* CONFIG_POST */ diff --git a/board/amcc/ocotea/ocotea.c b/board/amcc/ocotea/ocotea.c index 951a8b539..7bffa3c40 100644 --- a/board/amcc/ocotea/ocotea.c +++ b/board/amcc/ocotea/ocotea.c @@ -400,15 +400,3 @@ void fpga_init(void) return; } - -#ifdef CONFIG_POST -/* - * Returns 1 if keys pressed to start the power-on long-running tests - * Called from board_init_f(). - */ -int post_hotkeys_pressed(void) -{ - - return (ctrlc()); -} -#endif diff --git a/board/amcc/sequoia/sequoia.c b/board/amcc/sequoia/sequoia.c index cb34c9d7d..6756a2723 100644 --- a/board/amcc/sequoia/sequoia.c +++ b/board/amcc/sequoia/sequoia.c @@ -370,17 +370,6 @@ void board_pci_fixup_irq(struct pci_controller *hose, pci_dev_t dev) } #endif -#if defined(CONFIG_POST) -/* - * Returns 1 if keys pressed to start the power-on long-running tests - * Called from board_init_f(). - */ -int post_hotkeys_pressed(void) -{ - return 0; /* No hotkeys supported */ -} -#endif /* CONFIG_POST */ - #if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_SYS_RAMBOOT) /* * On NAND-booting sequoia, we need to patch the chips select numbers diff --git a/board/amcc/taishan/taishan.c b/board/amcc/taishan/taishan.c index 279fae21c..cac7a78d6 100644 --- a/board/amcc/taishan/taishan.c +++ b/board/amcc/taishan/taishan.c @@ -209,17 +209,6 @@ int checkboard (void) return (0); } -#ifdef CONFIG_POST -/* - * Returns 1 if keys pressed to start the power-on long-running tests - * Called from board_init_f(). - */ -int post_hotkeys_pressed(void) -{ - return (ctrlc()); -} -#endif - int board_eth_init(bd_t *bis) { cpu_eth_init(bis); diff --git a/board/amcc/yucca/yucca.c b/board/amcc/yucca/yucca.c index e0d19bcb6..67a016787 100644 --- a/board/amcc/yucca/yucca.c +++ b/board/amcc/yucca/yucca.c @@ -708,17 +708,6 @@ void fpga_init(void) return; } -#ifdef CONFIG_POST -/* - * Returns 1 if keys pressed to start the power-on long-running tests - * Called from board_init_f(). - */ -int post_hotkeys_pressed(void) -{ - return (ctrlc()); -} -#endif - /*---------------------------------------------------------------------------+ | onboard_pci_arbiter_selected => from EPLD +---------------------------------------------------------------------------*/ diff --git a/board/cm5200/cm5200.c b/board/cm5200/cm5200.c index 9e2f1a536..0b5412bde 100644 --- a/board/cm5200/cm5200.c +++ b/board/cm5200/cm5200.c @@ -330,14 +330,6 @@ int board_early_init_r(void) } -#ifdef CONFIG_POST -int post_hotkeys_pressed(void) -{ - return 0; -} -#endif /* CONFIG_POST */ - - #if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER) void post_word_store(ulong a) { diff --git a/board/esd/pmc440/pmc440.c b/board/esd/pmc440/pmc440.c index d0ff080fa..bd43a9aef 100644 --- a/board/esd/pmc440/pmc440.c +++ b/board/esd/pmc440/pmc440.c @@ -677,17 +677,6 @@ int is_pci_host(struct pci_controller *hose) } #endif /* defined(CONFIG_PCI) */ -#if defined(CONFIG_POST) -/* - * Returns 1 if keys pressed to start the power-on long-running tests - * Called from board_init_f(). - */ -int post_hotkeys_pressed(void) -{ - return 0; /* No hotkeys supported */ -} -#endif /* CONFIG_POST */ - #ifdef CONFIG_RESET_PHY_R void reset_phy(void) { diff --git a/board/gen860t/gen860t.c b/board/gen860t/gen860t.c index 008f765af..b37a0f24d 100644 --- a/board/gen860t/gen860t.c +++ b/board/gen860t/gen860t.c @@ -292,14 +292,3 @@ void board_poweroff (void) puts ("### Please power off the board ###\n"); while (1); } - -#ifdef CONFIG_POST -/* - * Returns 1 if keys pressed to start the power-on long-running tests - * Called from board_init_f(). - */ -int post_hotkeys_pressed (void) -{ - return 0; /* No hotkeys supported */ -} -#endif diff --git a/board/korat/korat.c b/board/korat/korat.c index f942052bd..d5260dc23 100644 --- a/board/korat/korat.c +++ b/board/korat/korat.c @@ -622,17 +622,6 @@ void pci_target_init(struct pci_controller *hose) } #endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ -#if defined(CONFIG_POST) -/* - * Returns 1 if keys pressed to start the power-on long-running tests - * Called from board_init_f(). - */ -int post_hotkeys_pressed(void) -{ - return 0; /* No hotkeys supported */ -} -#endif /* CONFIG_POST */ - #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) void ft_board_setup(void *blob, bd_t *bd) { diff --git a/board/kup/common/kup.c b/board/kup/common/kup.c index fec5407bc..2418d59d8 100644 --- a/board/kup/common/kup.c +++ b/board/kup/common/kup.c @@ -70,14 +70,3 @@ void poweron_key (void) else setenv ("key1", "on"); } - -#ifdef CONFIG_POST -/* - * Returns 1 if keys pressed to start the power-on long-running tests - * Called from board_init_f(). - */ -int post_hotkeys_pressed (void) -{ - return (0); -} -#endif diff --git a/board/mpl/mip405/mip405.c b/board/mpl/mip405/mip405.c index 495e9bd88..af3a98a42 100644 --- a/board/mpl/mip405/mip405.c +++ b/board/mpl/mip405/mip405.c @@ -706,17 +706,6 @@ void print_mip405_rev (void) } -#ifdef CONFIG_POST -/* - * Returns 1 if keys pressed to start the power-on long-running tests - * Called from board_init_f(). - */ -int post_hotkeys_pressed(void) -{ - return 0; /* No hotkeys supported */ -} -#endif - extern int mk_date (char *, struct rtc_time *); int last_stage_init (void) diff --git a/board/netstal/hcu4/hcu4.c b/board/netstal/hcu4/hcu4.c index ba3e9c3cf..8efbc23c8 100644 --- a/board/netstal/hcu4/hcu4.c +++ b/board/netstal/hcu4/hcu4.c @@ -174,17 +174,6 @@ phys_size_t initdram(int board_type) return dram_size; } -#if defined(CONFIG_POST) -/* - * Returns 1 if keys pressed to start the power-on long-running tests - * Called from board_init_f(). - */ -int post_hotkeys_pressed(void) -{ - return 0; /* No hotkeys supported */ -} -#endif /* CONFIG_POST */ - #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) void ft_board_setup(void *blob, bd_t *bd) { diff --git a/board/netstal/hcu5/hcu5.c b/board/netstal/hcu5/hcu5.c index 861564564..c545cc01e 100644 --- a/board/netstal/hcu5/hcu5.c +++ b/board/netstal/hcu5/hcu5.c @@ -390,17 +390,6 @@ void pci_master_init(struct pci_controller *hose) } #endif /* defined(CONFIG_PCI) */ -#if defined(CONFIG_POST) -/* - * Returns 1 if keys pressed to start the power-on long-running tests - * Called from board_init_f(). - */ -int post_hotkeys_pressed(void) -{ - return 0; /* No hotkeys supported */ -} -#endif /* CONFIG_POST */ - #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) void ft_board_setup(void *blob, bd_t *bd) { diff --git a/board/netstal/mcu25/mcu25.c b/board/netstal/mcu25/mcu25.c index 945d79aa2..c66ab97ac 100644 --- a/board/netstal/mcu25/mcu25.c +++ b/board/netstal/mcu25/mcu25.c @@ -173,17 +173,6 @@ phys_size_t initdram(int board_type) return dram_size; } -#if defined(CONFIG_POST) -/* - * Returns 1 if keys pressed to start the power-on long-running tests - * Called from board_init_f(). - */ -int post_hotkeys_pressed(void) -{ - return 0; /* No hotkeys supported */ -} -#endif /* CONFIG_POST */ - #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) void ft_board_setup(void *blob, bd_t *bd) { diff --git a/board/netta/netta.c b/board/netta/netta.c index 38c9d8919..5c935f47a 100644 --- a/board/netta/netta.c +++ b/board/netta/netta.c @@ -564,17 +564,6 @@ int pcmcia_init(void) #endif -#ifdef CONFIG_POST -/* - * Returns 1 if keys pressed to start the power-on long-running tests - * Called from board_init_f(). - */ -int post_hotkeys_pressed(void) -{ - return 0; /* No hotkeys supported */ -} -#endif - #ifdef CONFIG_HW_WATCHDOG void hw_watchdog_reset(void) diff --git a/board/prodrive/alpr/alpr.c b/board/prodrive/alpr/alpr.c index 66153279f..060e7eb23 100644 --- a/board/prodrive/alpr/alpr.c +++ b/board/prodrive/alpr/alpr.c @@ -228,15 +228,3 @@ void pci_master_init(struct pci_controller *hose) out32r(PCIL0_POM1SA, ~(0x10000000 - 1) | 1); /* 256MB + enable region */ } #endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) */ - -#ifdef CONFIG_POST -/* - * Returns 1 if keys pressed to start the power-on long-running tests - * Called from board_init_f(). - */ -int post_hotkeys_pressed(void) -{ - - return (ctrlc()); -} -#endif diff --git a/board/sacsng/sacsng.c b/board/sacsng/sacsng.c index 2513937ed..49d8bba15 100644 --- a/board/sacsng/sacsng.c +++ b/board/sacsng/sacsng.c @@ -869,15 +869,3 @@ void spi_cs_deactivate(struct spi_slave *slave) #endif #endif /* CONFIG_MISC_INIT_R */ - -#ifdef CONFIG_POST -/* - * Returns 1 if keys pressed to start the power-on long-running tests - * Called from board_init_f(). - */ -int post_hotkeys_pressed(void) -{ - return 0; /* No hotkeys supported */ -} - -#endif diff --git a/board/ssv/adnpesc1/adnpesc1.c b/board/ssv/adnpesc1/adnpesc1.c index 72810d036..802bfba1a 100644 --- a/board/ssv/adnpesc1/adnpesc1.c +++ b/board/ssv/adnpesc1/adnpesc1.c @@ -91,17 +91,6 @@ void spi_cs_deactivate(struct spi_slave *slave) #endif -#if defined(CONFIG_POST) -/* - * Returns 1 if keys pressed to start the power-on long-running tests - * Called from board_init_f(). - */ -int post_hotkeys_pressed(void) -{ - return 0; /* No hotkeys supported */ -} -#endif /* CONFIG_POST */ - #ifdef CONFIG_CMD_NET int board_eth_init(bd_t *bis) { diff --git a/board/uc100/uc100.c b/board/uc100/uc100.c index 38c7be6ba..4dba2900d 100644 --- a/board/uc100/uc100.c +++ b/board/uc100/uc100.c @@ -268,15 +268,3 @@ int misc_init_r (void) return 0; } - - -#ifdef CONFIG_POST -/* - * Returns 1 if keys pressed to start the power-on long-running tests - * Called from board_init_f(). - */ -int post_hotkeys_pressed (void) -{ - return 0; /* No hotkeys supported */ -} -#endif diff --git a/post/post.c b/post/post.c index b74e76231..b29eb87fc 100644 --- a/post/post.c +++ b/post/post.c @@ -58,6 +58,22 @@ int post_init_f (void) return res; } +/* + * Supply a default implementation for post_hotkeys_pressed() for boards + * without hotkey support. We always return 0 here, so that the + * long-running tests won't be started. + * + * Boards with hotkey support can override this weak default function + * by defining one in their board specific code. + */ +int __post_hotkeys_pressed(void) +{ + return 0; /* No hotkeys supported */ +} +int post_hotkeys_pressed(void) + __attribute__((weak, alias("__post_hotkeys_pressed"))); + + void post_bootmode_init (void) { int bootmode = post_bootmode_get (0); -- cgit v1.2.3 From 00b6d927ba8900cdf218b90b277e1090e284bea6 Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Thu, 3 Dec 2009 11:20:06 +0100 Subject: 5xxx, fdt: move fdt_fixup_memory() to cpu.c file u-boot updates, before starting Linux, the memory node in the DTS. As this is a "standard" feature, move this functionality to the cpu.c file for mpc5xxx and mpc512x processors. Signed-off-by: Heiko Schocher --- board/cm5200/cm5200.c | 7 ------- board/davedenx/aria/aria.c | 1 - board/esd/mecp5123/mecp5123.c | 1 - board/freescale/mpc5121ads/mpc5121ads.c | 1 - board/matrix_vision/mvbc_p/mvbc_p.c | 1 - board/mucmc52/mucmc52.c | 1 - board/tqc/tqm5200/tqm5200.c | 1 - board/uc101/uc101.c | 1 - cpu/mpc512x/cpu.c | 1 + cpu/mpc5xxx/cpu.c | 1 + 10 files changed, 2 insertions(+), 14 deletions(-) (limited to 'board') diff --git a/board/cm5200/cm5200.c b/board/cm5200/cm5200.c index 0b5412bde..5ebcd66c6 100644 --- a/board/cm5200/cm5200.c +++ b/board/cm5200/cm5200.c @@ -271,13 +271,6 @@ static void ft_blob_update(void *blob, bd_t *bd) if (ret < 0) printf("ft_blob_update(): cannot set /model property err:%s\n", fdt_strerror(ret)); - - ret = fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize); - - if (ret < 0) { - printf("ft_blob_update(): cannot set /memory/reg " - "property err:%s\n", fdt_strerror(ret)); - } } #endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */ diff --git a/board/davedenx/aria/aria.c b/board/davedenx/aria/aria.c index cc69c9d38..f17df60c2 100644 --- a/board/davedenx/aria/aria.c +++ b/board/davedenx/aria/aria.c @@ -196,6 +196,5 @@ int checkboard (void) void ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); - fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize); } #endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/board/esd/mecp5123/mecp5123.c b/board/esd/mecp5123/mecp5123.c index 513935844..748ad7cec 100644 --- a/board/esd/mecp5123/mecp5123.c +++ b/board/esd/mecp5123/mecp5123.c @@ -273,6 +273,5 @@ int checkboard(void) void ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); - fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize); } #endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/board/freescale/mpc5121ads/mpc5121ads.c b/board/freescale/mpc5121ads/mpc5121ads.c index 2fa365009..2e13ea802 100644 --- a/board/freescale/mpc5121ads/mpc5121ads.c +++ b/board/freescale/mpc5121ads/mpc5121ads.c @@ -350,6 +350,5 @@ int checkboard (void) void ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); - fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize); } #endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/board/matrix_vision/mvbc_p/mvbc_p.c b/board/matrix_vision/mvbc_p/mvbc_p.c index 0cbe900c7..439217653 100644 --- a/board/matrix_vision/mvbc_p/mvbc_p.c +++ b/board/matrix_vision/mvbc_p/mvbc_p.c @@ -262,7 +262,6 @@ void show_boot_progress(int val) void ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); - fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize); } int board_eth_init(bd_t *bis) diff --git a/board/mucmc52/mucmc52.c b/board/mucmc52/mucmc52.c index b4ed7357e..66973f09d 100644 --- a/board/mucmc52/mucmc52.c +++ b/board/mucmc52/mucmc52.c @@ -404,6 +404,5 @@ void pci_init_board (void) void ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); - fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize); } #endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/board/tqc/tqm5200/tqm5200.c b/board/tqc/tqm5200/tqm5200.c index 5a091c40d..d90bae8cc 100644 --- a/board/tqc/tqm5200/tqm5200.c +++ b/board/tqc/tqm5200/tqm5200.c @@ -745,7 +745,6 @@ int board_get_height (void) void ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); - fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize); } #endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/board/uc101/uc101.c b/board/uc101/uc101.c index 1485c0249..c7dfb7bad 100644 --- a/board/uc101/uc101.c +++ b/board/uc101/uc101.c @@ -377,6 +377,5 @@ void hw_watchdog_reset(void) void ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); - fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize); } #endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/cpu/mpc512x/cpu.c b/cpu/mpc512x/cpu.c index 42ccd81e7..dac48dbd3 100644 --- a/cpu/mpc512x/cpu.c +++ b/cpu/mpc512x/cpu.c @@ -197,6 +197,7 @@ void ft_cpu_setup(void *blob, bd_t *bd) #ifdef CONFIG_HAS_ETH0 fdt_fixup_ethernet(blob); #endif + fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize); } #endif diff --git a/cpu/mpc5xxx/cpu.c b/cpu/mpc5xxx/cpu.c index efa64c748..2a28df459 100644 --- a/cpu/mpc5xxx/cpu.c +++ b/cpu/mpc5xxx/cpu.c @@ -157,6 +157,7 @@ void ft_cpu_setup(void *blob, bd_t *bd) } #endif + fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize); } #endif -- cgit v1.2.3 From a1725999b8b7527971183122cdfb54e2f87f61ae Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Fri, 16 Oct 2009 00:06:36 -0500 Subject: TI OMAP3: SDP3430 FIX NET_MULTI Warning Enable the NET MULTI option and remove build warning Tested: SDP3430 Signed-off-by: Nishanth Menon Signed-off-by: Ben Warren --- board/ti/sdp3430/sdp.c | 12 +++++++----- include/configs/omap3_sdp3430.h | 3 ++- 2 files changed, 9 insertions(+), 6 deletions(-) (limited to 'board') diff --git a/board/ti/sdp3430/sdp.c b/board/ti/sdp3430/sdp.c index 40cf26f42..0d8e20dc7 100644 --- a/board/ti/sdp3430/sdp.c +++ b/board/ti/sdp3430/sdp.c @@ -22,6 +22,7 @@ * MA 02111-1307 USA */ #include +#include #include #include #include @@ -125,12 +126,13 @@ int board_init(void) #define ETH_CONTROL_REG (CONFIG_LAN91C96_BASE + 0x30b) /** - * @brief ether_init Take the Ethernet controller out of reset and wait + * @brief board_eth_init Take the Ethernet controller out of reset and wait * for the EEPROM load to complete. */ -static void ether_init(void) +int board_eth_init(bd_t *bis) { -#ifdef CONFIG_DRIVER_LAN91C96 + int rc = 0; +#ifdef CONFIG_LAN91C96 int cnt = 20; writew(0x0, LAN_RESET_REGISTER); @@ -155,10 +157,11 @@ static void ether_init(void) writeb(readb(ETH_CONTROL_REG) & ~0x1, ETH_CONTROL_REG); udelay(1000); + rc = lan91c96_initialize(0, CONFIG_LAN91C96_BASE); reset_err_out: - return; #endif + return rc; } /** @@ -187,7 +190,6 @@ int misc_init_r(void) * VSIM - off (init, variable) for MMC1.DAT[3..7], SIM * VPLL2 - 1.8V */ - ether_init(); return 0; } diff --git a/include/configs/omap3_sdp3430.h b/include/configs/omap3_sdp3430.h index d91c8ffa8..fa2ad5343 100644 --- a/include/configs/omap3_sdp3430.h +++ b/include/configs/omap3_sdp3430.h @@ -203,7 +203,8 @@ */ #if defined(CONFIG_CMD_NET) -#define CONFIG_DRIVER_LAN91C96 +#define CONFIG_NET_MULTI +#define CONFIG_LAN91C96 #define CONFIG_LAN91C96_BASE DEBUG_BASE #define CONFIG_LAN91C96_EXT_PHY -- cgit v1.2.3 From ac6b362a2598b8cd27beb071fa6224cf8b121e1b Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Fri, 16 Oct 2009 00:06:37 -0500 Subject: LAN91C96: Enable NET_MULTI LAN driver This modification is NOT tested on any of the platforms modified as I dont have them. please help by testing+building+fixing Signed-off-by: Nishanth Menon Signed-off-by: Ben Warren --- board/apollon/apollon.c | 12 +++++++----- include/configs/B2.h | 2 +- include/configs/apollon.h | 3 ++- include/configs/assabet.h | 3 ++- include/configs/gcplus.h | 3 ++- include/configs/lubbock.h | 3 ++- include/configs/omap1510inn.h | 3 ++- include/configs/omap1610h2.h | 3 ++- include/configs/omap1610inn.h | 3 ++- include/configs/omap2420h4.h | 3 ++- include/configs/omap5912osk.h | 3 ++- include/configs/omap730p2.h | 3 ++- include/configs/pleb2.h | 6 ++++-- 13 files changed, 32 insertions(+), 18 deletions(-) (limited to 'board') diff --git a/board/apollon/apollon.c b/board/apollon/apollon.c index 8964eba7f..b93e88088 100644 --- a/board/apollon/apollon.c +++ b/board/apollon/apollon.c @@ -24,6 +24,7 @@ * MA 02111-1307 USA */ #include +#include #include #include #include @@ -138,13 +139,14 @@ void wait_for_command_complete(unsigned int wd_base) } /******************************************************************* - * Routine:ether_init + * Routine:board_eth_init * Description: take the Ethernet controller out of reset and wait * for the EEPROM load to complete. ******************************************************************/ -void ether_init(void) +int board_eth_init(bd_t *bis) { -#ifdef CONFIG_DRIVER_LAN91C96 + int rc = 0; +#ifdef CONFIG_LAN91C96 int cnt = 20; __raw_writeb(0x03, OMAP2420_CTRL_BASE + 0x0f2); /*protect->gpio74 */ @@ -171,10 +173,10 @@ void ether_init(void) mask_config_reg(ETH_CONTROL_REG, 0x01); udelay(1000); - + rc = lan91c96_initialize(0, CONFIG_LAN91C96_BASE); eth_reset_err_out: - return; #endif + return rc; } /********************************************** diff --git a/include/configs/B2.h b/include/configs/B2.h index e5439f3b5..d7806e962 100644 --- a/include/configs/B2.h +++ b/include/configs/B2.h @@ -58,7 +58,7 @@ /* * Hardware drivers */ -#define CONFIG_DRIVER_LAN91C96 +#define CONFIG_LAN91C96 #define CONFIG_LAN91C96_BASE 0x04000300 /* base address */ #define CONFIG_SMC_USE_32_BIT #undef CONFIG_SHOW_ACTIVITY diff --git a/include/configs/apollon.h b/include/configs/apollon.h index adab45422..ed14f7aa6 100644 --- a/include/configs/apollon.h +++ b/include/configs/apollon.h @@ -88,7 +88,8 @@ /* * SMC91c96 Etherent */ -#define CONFIG_DRIVER_LAN91C96 +#define CONFIG_NET_MULTI +#define CONFIG_LAN91C96 #define CONFIG_LAN91C96_BASE (APOLLON_CS1_BASE+0x300) #define CONFIG_LAN91C96_EXT_PHY diff --git a/include/configs/assabet.h b/include/configs/assabet.h index 8c5b84cf6..d17d4bd96 100644 --- a/include/configs/assabet.h +++ b/include/configs/assabet.h @@ -53,7 +53,8 @@ /* * Hardware drivers */ -#define CONFIG_DRIVER_LAN91C96 /* we have an SMC9194 on-board */ +#define CONFIG_NET_MULTI +#define CONFIG_LAN91C96 /* we have an SMC9194 on-board */ #define CONFIG_LAN91C96_BASE 0x18000000 /* diff --git a/include/configs/gcplus.h b/include/configs/gcplus.h index 85db4f5c7..41294b9be 100644 --- a/include/configs/gcplus.h +++ b/include/configs/gcplus.h @@ -66,7 +66,8 @@ /* * Hardware drivers */ -#define CONFIG_DRIVER_LAN91C96 /* we have an SMC9194 on-board */ +#define CONFIG_NET_MULTI +#define CONFIG_LAN91C96 /* we have an SMC9194 on-board */ #define CONFIG_LAN91C96_BASE 0x100e0000 /* diff --git a/include/configs/lubbock.h b/include/configs/lubbock.h index 43913cada..0a6921044 100644 --- a/include/configs/lubbock.h +++ b/include/configs/lubbock.h @@ -58,7 +58,8 @@ /* * Hardware drivers */ -#define CONFIG_DRIVER_LAN91C96 +#define CONFIG_NET_MULTI +#define CONFIG_LAN91C96 #define CONFIG_LAN91C96_BASE 0x0C000000 /* diff --git a/include/configs/omap1510inn.h b/include/configs/omap1510inn.h index 8408209d6..b0ebafd7b 100644 --- a/include/configs/omap1510inn.h +++ b/include/configs/omap1510inn.h @@ -60,7 +60,8 @@ #define CONFIG_SMC9196_BASE 0x08000300 #define CONFIG_SMC9196_EXT_PHY */ -#define CONFIG_DRIVER_LAN91C96 +#define CONFIG_NET_MULTI +#define CONFIG_LAN91C96 #define CONFIG_LAN91C96_BASE 0x08000300 #define CONFIG_LAN91C96_EXT_PHY diff --git a/include/configs/omap1610h2.h b/include/configs/omap1610h2.h index 42e019831..0bbb5b35c 100644 --- a/include/configs/omap1610h2.h +++ b/include/configs/omap1610h2.h @@ -57,7 +57,8 @@ /* * Hardware drivers */ -#define CONFIG_DRIVER_LAN91C96 +#define CONFIG_NET_MULTI +#define CONFIG_LAN91C96 #define CONFIG_LAN91C96_BASE 0x04000300 #define CONFIG_LAN91C96_EXT_PHY diff --git a/include/configs/omap1610inn.h b/include/configs/omap1610inn.h index 22c873e0c..832dd426b 100644 --- a/include/configs/omap1610inn.h +++ b/include/configs/omap1610inn.h @@ -58,7 +58,8 @@ */ /* */ -#define CONFIG_DRIVER_LAN91C96 +#define CONFIG_NET_MULTI +#define CONFIG_LAN91C96 #define CONFIG_LAN91C96_BASE 0x04000300 #define CONFIG_LAN91C96_EXT_PHY diff --git a/include/configs/omap2420h4.h b/include/configs/omap2420h4.h index 9c1884244..6ab44387a 100644 --- a/include/configs/omap2420h4.h +++ b/include/configs/omap2420h4.h @@ -81,7 +81,8 @@ /* * SMC91c96 Etherent */ -#define CONFIG_DRIVER_LAN91C96 +#define CONFIG_NET_MULTI +#define CONFIG_LAN91C96 #define CONFIG_LAN91C96_BASE (H4_CS1_BASE+0x300) #define CONFIG_LAN91C96_EXT_PHY diff --git a/include/configs/omap5912osk.h b/include/configs/omap5912osk.h index d0ce9dc91..bc660e39e 100644 --- a/include/configs/omap5912osk.h +++ b/include/configs/omap5912osk.h @@ -61,7 +61,8 @@ */ /* */ -#define CONFIG_DRIVER_LAN91C96 +#define CONFIG_NET_MULTI +#define CONFIG_LAN91C96 #define CONFIG_LAN91C96_BASE 0x04800300 #define CONFIG_LAN91C96_EXT_PHY diff --git a/include/configs/omap730p2.h b/include/configs/omap730p2.h index 32a9b2397..a6a8a023f 100644 --- a/include/configs/omap730p2.h +++ b/include/configs/omap730p2.h @@ -65,7 +65,8 @@ * Hardware drivers */ -#define CONFIG_DRIVER_LAN91C96 +#define CONFIG_NET_MULTI +#define CONFIG_LAN91C96 #define CONFIG_LAN91C96_BASE 0x04000300 #define CONFIG_LAN91C96_EXT_PHY diff --git a/include/configs/pleb2.h b/include/configs/pleb2.h index 635ef71bc..9e694118c 100644 --- a/include/configs/pleb2.h +++ b/include/configs/pleb2.h @@ -56,8 +56,10 @@ */ /* None - PLEB 2 doesn't have any of this. - #define CONFIG_DRIVER_LAN91C96 - #define CONFIG_LAN91C96_BASE 0x0C000000 */ + #define CONFIG_NET_MULTI + #define CONFIG_LAN91C96 + #define CONFIG_LAN91C96_BASE 0x0C000000 + */ /* * select serial console configuration -- cgit v1.2.3 From 1ab70f6fff9fa3b7910c11b874f625e004256c50 Mon Sep 17 00:00:00 2001 From: Ben Warren Date: Mon, 14 Dec 2009 16:30:39 -0800 Subject: Net: Clean up LAN91C96 Support A previous Commit converted the LAN91C96 Ethernet driver to using the CONFIG_NET_MULTI API, but did not include full board support. This patch finishes the job. Signed-off-by: Ben Warren --- board/apollon/apollon.c | 1 - board/assabet/assabet.c | 12 ++++++++++++ board/dave/B2/B2.c | 12 ++++++++++++ board/gcplus/gcplus.c | 12 ++++++++++++ board/logicpd/zoom1/zoom1.c | 12 ++++++++++++ board/logicpd/zoom2/zoom2.c | 12 ++++++++++++ board/lubbock/lubbock.c | 12 ++++++++++++ board/ti/omap1510inn/omap1510innovator.c | 12 ++++++++++++ board/ti/omap1610inn/omap1610innovator.c | 12 ++++++++++++ board/ti/omap2420h4/omap2420h4.c | 12 ++++++++++++ board/ti/omap5912osk/omap5912osk.c | 12 ++++++++++++ board/ti/omap730p2/omap730p2.c | 12 ++++++++++++ include/configs/B2.h | 2 +- 13 files changed, 133 insertions(+), 2 deletions(-) (limited to 'board') diff --git a/board/apollon/apollon.c b/board/apollon/apollon.c index b93e88088..4768f5897 100644 --- a/board/apollon/apollon.c +++ b/board/apollon/apollon.c @@ -95,7 +95,6 @@ void s_init(void) ********************************************************/ int misc_init_r(void) { - ether_init(); /* better done here so timers are init'ed */ return (0); } diff --git a/board/assabet/assabet.c b/board/assabet/assabet.c index 6f02db29b..753c8d243 100644 --- a/board/assabet/assabet.c +++ b/board/assabet/assabet.c @@ -25,6 +25,7 @@ */ #include +#include #include DECLARE_GLOBAL_DATA_PTR; @@ -117,3 +118,14 @@ dram_init(void) return (0); } + +#ifdef CONFIG_CMD_NET +int board_eth_init(bd_t *bis) +{ + int rc = 0; +#ifdef CONFIG_LAN91C96 + rc = lan91c96_initialize(0, CONFIG_LAN91C96_BASE); +#endif + return rc; +} +#endif diff --git a/board/dave/B2/B2.c b/board/dave/B2/B2.c index ec742adc7..096ebbd16 100644 --- a/board/dave/B2/B2.c +++ b/board/dave/B2/B2.c @@ -25,6 +25,7 @@ */ #include +#include #include DECLARE_GLOBAL_DATA_PTR; @@ -125,3 +126,14 @@ int dram_init (void) return (0); } + +#ifdef CONFIG_CMD_NET +int board_eth_init(bd_t *bis) +{ + int rc = 0; +#ifdef CONFIG_LAN91C96 + rc = lan91c96_initialize(0, CONFIG_LAN91C96_BASE); +#endif + return rc; +} +#endif diff --git a/board/gcplus/gcplus.c b/board/gcplus/gcplus.c index 829b59759..71607f222 100644 --- a/board/gcplus/gcplus.c +++ b/board/gcplus/gcplus.c @@ -25,6 +25,7 @@ */ #include +#include #include DECLARE_GLOBAL_DATA_PTR; @@ -68,3 +69,14 @@ dram_init(void) return (0); } + +#ifdef CONFIG_CMD_NET +int board_eth_init(bd_t *bis) +{ + int rc = 0; +#ifdef CONFIG_LAN91C96 + rc = lan91c96_initialize(0, CONFIG_LAN91C96_BASE); +#endif + return rc; +} +#endif diff --git a/board/logicpd/zoom1/zoom1.c b/board/logicpd/zoom1/zoom1.c index f4d3754ca..a144f52e6 100644 --- a/board/logicpd/zoom1/zoom1.c +++ b/board/logicpd/zoom1/zoom1.c @@ -31,6 +31,7 @@ * MA 02111-1307 USA */ #include +#include #include #include #include @@ -86,3 +87,14 @@ void set_muxconf_regs(void) /* platform specific muxes */ MUX_ZOOM1_MDK(); } + +#ifdef CONFIG_CMD_NET +int board_eth_init(bd_t *bis) +{ + int rc = 0; +#ifdef CONFIG_LAN91C96 + rc = lan91c96_initialize(0, CONFIG_LAN91C96_BASE); +#endif + return rc; +} +#endif diff --git a/board/logicpd/zoom2/zoom2.c b/board/logicpd/zoom2/zoom2.c index dadbeb673..21afc29b3 100644 --- a/board/logicpd/zoom2/zoom2.c +++ b/board/logicpd/zoom2/zoom2.c @@ -29,6 +29,7 @@ * MA 02111-1307 USA */ #include +#include #ifdef CONFIG_STATUS_LED #include #endif @@ -177,3 +178,14 @@ void set_muxconf_regs (void) /* platform specific muxes */ MUX_ZOOM2 (); } + +#ifdef CONFIG_CMD_NET +int board_eth_init(bd_t *bis) +{ + int rc = 0; +#ifdef CONFIG_LAN91C96 + rc = lan91c96_initialize(0, CONFIG_LAN91C96_BASE); +#endif + return rc; +} +#endif diff --git a/board/lubbock/lubbock.c b/board/lubbock/lubbock.c index 58291706c..d8d6ffbf6 100644 --- a/board/lubbock/lubbock.c +++ b/board/lubbock/lubbock.c @@ -26,6 +26,7 @@ */ #include +#include DECLARE_GLOBAL_DATA_PTR; @@ -68,3 +69,14 @@ int dram_init (void) return 0; } + +#ifdef CONFIG_CMD_NET +int board_eth_init(bd_t *bis) +{ + int rc = 0; +#ifdef CONFIG_LAN91C96 + rc = lan91c96_initialize(0, CONFIG_LAN91C96_BASE); +#endif + return rc; +} +#endif diff --git a/board/ti/omap1510inn/omap1510innovator.c b/board/ti/omap1510inn/omap1510innovator.c index 894120951..2cb606222 100644 --- a/board/ti/omap1510inn/omap1510innovator.c +++ b/board/ti/omap1510inn/omap1510innovator.c @@ -30,6 +30,7 @@ */ #include +#include DECLARE_GLOBAL_DATA_PTR; @@ -127,3 +128,14 @@ int dram_init (void) return 0; } + +#ifdef CONFIG_CMD_NET +int board_eth_init(bd_t *bis) +{ + int rc = 0; +#ifdef CONFIG_LAN91C96 + rc = lan91c96_initialize(0, CONFIG_LAN91C96_BASE); +#endif + return rc; +} +#endif diff --git a/board/ti/omap1610inn/omap1610innovator.c b/board/ti/omap1610inn/omap1610innovator.c index 2e04ad4bd..44818bbda 100644 --- a/board/ti/omap1610inn/omap1610innovator.c +++ b/board/ti/omap1610inn/omap1610innovator.c @@ -32,6 +32,7 @@ */ #include +#include #if defined(CONFIG_OMAP1610) #include <./configs/omap1510.h> #endif @@ -302,3 +303,14 @@ void peripheral_power_enable (void) *SW_CLOCK_REQUEST |= UART1_48MHZ_ENABLE; } + +#ifdef CONFIG_CMD_NET +int board_eth_init(bd_t *bis) +{ + int rc = 0; +#ifdef CONFIG_LAN91C96 + rc = lan91c96_initialize(0, CONFIG_LAN91C96_BASE); +#endif + return rc; +} +#endif diff --git a/board/ti/omap2420h4/omap2420h4.c b/board/ti/omap2420h4/omap2420h4.c index 8d1823900..1c98e1b82 100644 --- a/board/ti/omap2420h4/omap2420h4.c +++ b/board/ti/omap2420h4/omap2420h4.c @@ -22,6 +22,7 @@ * MA 02111-1307 USA */ #include +#include #include #include #include @@ -842,3 +843,14 @@ void update_mux(u32 btype,u32 mtype) } } } + +#ifdef CONFIG_CMD_NET +int board_eth_init(bd_t *bis) +{ + int rc = 0; +#ifdef CONFIG_LAN91C96 + rc = lan91c96_initialize(0, CONFIG_LAN91C96_BASE); +#endif + return rc; +} +#endif diff --git a/board/ti/omap5912osk/omap5912osk.c b/board/ti/omap5912osk/omap5912osk.c index 6993b136e..cbf451baa 100644 --- a/board/ti/omap5912osk/omap5912osk.c +++ b/board/ti/omap5912osk/omap5912osk.c @@ -34,6 +34,7 @@ */ #include +#include #if defined(CONFIG_OMAP1610) #include <./configs/omap1510.h> #endif @@ -306,3 +307,14 @@ int checkboard(void) return (0); } + +#ifdef CONFIG_CMD_NET +int board_eth_init(bd_t *bis) +{ + int rc = 0; +#ifdef CONFIG_LAN91C96 + rc = lan91c96_initialize(0, CONFIG_LAN91C96_BASE); +#endif + return rc; +} +#endif diff --git a/board/ti/omap730p2/omap730p2.c b/board/ti/omap730p2/omap730p2.c index 309d66758..954ced5ef 100644 --- a/board/ti/omap730p2/omap730p2.c +++ b/board/ti/omap730p2/omap730p2.c @@ -30,6 +30,7 @@ */ #include +#include #if defined(CONFIG_OMAP730) #include <./configs/omap730.h> #endif @@ -263,3 +264,14 @@ void peripheral_power_enable (void) *MuxConfReg &= (0xFF1FFFFF); *MuxConfReg &= (0xF1FFFFFF); } + +#ifdef CONFIG_CMD_NET +int board_eth_init(bd_t *bis) +{ + int rc = 0; +#ifdef CONFIG_LAN91C96 + rc = lan91c96_initialize(0, CONFIG_LAN91C96_BASE); +#endif + return rc; +} +#endif diff --git a/include/configs/B2.h b/include/configs/B2.h index d7806e962..f51a26115 100644 --- a/include/configs/B2.h +++ b/include/configs/B2.h @@ -98,7 +98,7 @@ #define CONFIG_CMD_EEPROM #define CONFIG_CMD_I2C - +#define CONFIG_NET_MULTI #define CONFIG_BOOTDELAY 5 #define CONFIG_ETHADDR 00:50:c2:1e:af:fb #define CONFIG_BOOTARGS "setenv bootargs root=/dev/ram ip=192.168.0.70:::::eth0:off \ -- cgit v1.2.3 From 2ec1abea4359b94523d45a20d68d8582e09ace46 Mon Sep 17 00:00:00 2001 From: Tom Rix Date: Sat, 31 Oct 2009 12:37:45 -0500 Subject: OMAP3 zoom2 Use usbtty if the debug board is not connected. The preferred serial output comes from the debug board. When the debug board is disconnected, fall back on using usbtty from the usb connector on the Zoom2 board. This shows up as /dev/ttyACM0 in a linux host. Signed-off-by: Tom Rix --- board/logicpd/zoom2/zoom2_serial.c | 12 ++++++++---- include/configs/omap3_zoom2.h | 17 +++++++++++++++++ include/serial.h | 12 ++++++++++++ 3 files changed, 37 insertions(+), 4 deletions(-) (limited to 'board') diff --git a/board/logicpd/zoom2/zoom2_serial.c b/board/logicpd/zoom2/zoom2_serial.c index a3d777dfa..ba58e3934 100644 --- a/board/logicpd/zoom2/zoom2_serial.c +++ b/board/logicpd/zoom2/zoom2_serial.c @@ -86,6 +86,8 @@ void quad_putc_dev (unsigned long base, const char c) quad_putc_dev (base, '\r'); NS16550_putc ((NS16550_t) base, c); + } else { + usbtty_putc(c); } } @@ -94,6 +96,8 @@ void quad_puts_dev (unsigned long base, const char *s) if (zoom2_debug_board_connected ()) { while ((s != NULL) && (*s != '\0')) quad_putc_dev (base, *s++); + } else { + usbtty_puts(s); } } @@ -101,16 +105,16 @@ int quad_getc_dev (unsigned long base) { if (zoom2_debug_board_connected ()) return NS16550_getc ((NS16550_t) base); - else - return 0; + + return usbtty_getc(); } int quad_tstc_dev (unsigned long base) { if (zoom2_debug_board_connected ()) return NS16550_tstc ((NS16550_t) base); - else - return 0; + + return usbtty_tstc(); } void quad_setbrg_dev (unsigned long base) diff --git a/include/configs/omap3_zoom2.h b/include/configs/omap3_zoom2.h index 2b076666e..7a8beb850 100644 --- a/include/configs/omap3_zoom2.h +++ b/include/configs/omap3_zoom2.h @@ -125,6 +125,20 @@ #define CONFIG_OMAP3_GPIO_3 /* board revision */ #define CONFIG_OMAP3_GPIO_5 /* debug board detection, ZOOM2_LED_BLUE */ +/* USB */ +#define CONFIG_MUSB_UDC 1 +#define CONFIG_USB_OMAP3 1 +#define CONFIG_TWL4030_USB 1 + +/* USB device configuration */ +#define CONFIG_USB_DEVICE 1 +#define CONFIG_USB_TTY 1 +/* Change these to suit your needs */ +#define CONFIG_USBD_VENDORID 0x0451 +#define CONFIG_USBD_PRODUCTID 0x5678 +#define CONFIG_USBD_MANUFACTURER "Texas Instruments" +#define CONFIG_USBD_PRODUCT_NAME "Zoom2" + /* commands to include */ #include @@ -170,6 +184,9 @@ /* Environment information */ #define CONFIG_BOOTDELAY 10 +#define CONFIG_EXTRA_ENV_SETTINGS \ + "usbtty=cdc_acm\0" \ + /* * Miscellaneous configurable options */ diff --git a/include/serial.h b/include/serial.h index 43451a301..f2638ec56 100644 --- a/include/serial.h +++ b/include/serial.h @@ -67,9 +67,21 @@ extern int serial_assign(char * name); extern void serial_reinit_all(void); /* For usbtty */ +#ifdef CONFIG_USB_TTY + extern int usbtty_getc(void); extern void usbtty_putc(const char c); extern void usbtty_puts(const char *str); extern int usbtty_tstc(void); +#else + +/* stubs */ +#define usbtty_getc() 0 +#define usbtty_putc(a) +#define usbtty_puts(a) +#define usbtty_tstc() 0 + +#endif /* CONFIG_USB_TTY */ + #endif -- cgit v1.2.3 From 87d93a1ba2ae23550e1370adb7a3b00af0831165 Mon Sep 17 00:00:00 2001 From: Wolfgang Wegner Date: Wed, 9 Dec 2009 15:16:47 +0100 Subject: move prototypes for gunzip() and zunzip() to common.h Prototype for gunzip/zunzip was only in lib_generic/gunzip.c and thus repeated in every file using it. This patch moves the prototypes to common.h and removes all prototypes distributed anywhere else. Signed-off-by: Wolfgang Wegner --- board/bf527-ezkit/video.c | 2 -- board/bf533-stamp/video.c | 2 -- board/bf548-ezkit/video.c | 2 -- board/cm-bf548/video.c | 2 -- board/dave/PPChameleonEVB/PPChameleonEVB.c | 3 --- board/esd/apc405/apc405.c | 3 --- board/esd/ash405/ash405.c | 4 ---- board/esd/cpci405/cpci405.c | 1 - board/esd/hh405/hh405.c | 4 ---- board/esd/pci405/pci405.c | 1 - board/esd/plu405/plu405.c | 3 --- board/esd/tasreg/tasreg.c | 1 - board/esd/voh405/voh405.c | 4 ---- board/esd/wuh405/wuh405.c | 4 ---- board/mpl/common/common_util.c | 1 - board/prodrive/pdnb3/pdnb3.c | 1 - common/cmd_bmp.c | 2 -- common/cmd_bootm.c | 1 - common/cmd_license.c | 1 - common/cmd_mem.c | 2 -- drivers/video/cfb_console.c | 2 -- fs/ubifs/ubifs.h | 3 --- include/common.h | 5 +++++ lib_generic/gunzip.c | 3 --- 24 files changed, 5 insertions(+), 52 deletions(-) (limited to 'board') diff --git a/board/bf527-ezkit/video.c b/board/bf527-ezkit/video.c index 0b6b7b2e7..57652be29 100644 --- a/board/bf527-ezkit/video.c +++ b/board/bf527-ezkit/video.c @@ -16,8 +16,6 @@ #include #include -int gunzip(void *, int, unsigned char *, unsigned long *); - #define DMA_SIZE16 2 #include diff --git a/board/bf533-stamp/video.c b/board/bf533-stamp/video.c index 28ffa618f..939bd35a0 100644 --- a/board/bf533-stamp/video.c +++ b/board/bf533-stamp/video.c @@ -20,8 +20,6 @@ #include #include -int gunzip(void *, int, unsigned char *, unsigned long *); - #define DMA_SIZE16 2 #include diff --git a/board/bf548-ezkit/video.c b/board/bf548-ezkit/video.c index f4f1becae..10b08e2bf 100644 --- a/board/bf548-ezkit/video.c +++ b/board/bf548-ezkit/video.c @@ -16,8 +16,6 @@ #include #include -int gunzip(void *, int, unsigned char *, unsigned long *); - #define DMA_SIZE16 2 #include diff --git a/board/cm-bf548/video.c b/board/cm-bf548/video.c index 078734269..4097f09e1 100644 --- a/board/cm-bf548/video.c +++ b/board/cm-bf548/video.c @@ -16,8 +16,6 @@ #include #include -int gunzip(void *, int, unsigned char *, unsigned long *); - #ifdef CONFIG_VIDEO #define DMA_SIZE16 2 diff --git a/board/dave/PPChameleonEVB/PPChameleonEVB.c b/board/dave/PPChameleonEVB/PPChameleonEVB.c index 06de6e0b1..6bc70ef9a 100644 --- a/board/dave/PPChameleonEVB/PPChameleonEVB.c +++ b/board/dave/PPChameleonEVB/PPChameleonEVB.c @@ -33,9 +33,6 @@ DECLARE_GLOBAL_DATA_PTR; /* ------------------------------------------------------------------------- */ -/* Prototypes */ -int gunzip(void *, int, unsigned char *, unsigned long *); - int board_early_init_f (void) { out32(GPIO0_OR, CONFIG_SYS_NAND0_CE); /* set initial outputs */ diff --git a/board/esd/apc405/apc405.c b/board/esd/apc405/apc405.c index 409a0540b..72c0907e0 100644 --- a/board/esd/apc405/apc405.c +++ b/board/esd/apc405/apc405.c @@ -54,9 +54,6 @@ const unsigned char fpgadata[] = */ #include "../common/fpga.c" -/* Prototypes */ -int gunzip(void *, int, unsigned char *, unsigned long *); - #ifdef CONFIG_LCD_USED /* logo bitmap data - gzip compressed and generated by bin2c */ unsigned char logo_bmp[] = diff --git a/board/esd/ash405/ash405.c b/board/esd/ash405/ash405.c index 5f0e67cbb..061595931 100644 --- a/board/esd/ash405/ash405.c +++ b/board/esd/ash405/ash405.c @@ -48,10 +48,6 @@ const unsigned char fpgadata[] = #include "../common/fpga.c" -/* Prototypes */ -int gunzip(void *, int, unsigned char *, unsigned long *); - - int board_early_init_f (void) { /* diff --git a/board/esd/cpci405/cpci405.c b/board/esd/cpci405/cpci405.c index c29c876d6..24db8830c 100644 --- a/board/esd/cpci405/cpci405.c +++ b/board/esd/cpci405/cpci405.c @@ -89,7 +89,6 @@ int N_AU_IMAGES = (sizeof(au_image) / sizeof(au_image[0])); /* Prototypes */ int cpci405_version(void); -int gunzip(void *, int, unsigned char *, unsigned long *); void lxt971_no_sleep(void); int board_early_init_f(void) diff --git a/board/esd/hh405/hh405.c b/board/esd/hh405/hh405.c index 132531b39..4251d51b2 100644 --- a/board/esd/hh405/hh405.c +++ b/board/esd/hh405/hh405.c @@ -251,10 +251,6 @@ const unsigned char fpgadata[] = #include "../common/fpga.c" -/* Prototypes */ -int gunzip(void *, int, unsigned char *, unsigned long *); - - /* logo bitmap data - gzip compressed and generated by bin2c */ unsigned char logo_bmp_320[] = { diff --git a/board/esd/pci405/pci405.c b/board/esd/pci405/pci405.c index 34a163240..536485727 100644 --- a/board/esd/pci405/pci405.c +++ b/board/esd/pci405/pci405.c @@ -34,7 +34,6 @@ DECLARE_GLOBAL_DATA_PTR; /* Prototypes */ -int gunzip(void *, int, unsigned char *, unsigned long *); int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); unsigned long fpga_done_state(void); unsigned long fpga_init_state(void); diff --git a/board/esd/plu405/plu405.c b/board/esd/plu405/plu405.c index fcffdf67c..e385a78a2 100644 --- a/board/esd/plu405/plu405.c +++ b/board/esd/plu405/plu405.c @@ -46,9 +46,6 @@ const unsigned char fpgadata[] = */ #include "../common/fpga.c" -/* Prototypes */ -int gunzip(void *, int, unsigned char *, unsigned long *); - int board_early_init_f(void) { /* diff --git a/board/esd/tasreg/tasreg.c b/board/esd/tasreg/tasreg.c index 18444427f..bd9fb2fc2 100644 --- a/board/esd/tasreg/tasreg.c +++ b/board/esd/tasreg/tasreg.c @@ -29,7 +29,6 @@ /* Prototypes */ -int gunzip(void *, int, unsigned char *, unsigned long *); int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len); int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len); diff --git a/board/esd/voh405/voh405.c b/board/esd/voh405/voh405.c index 3f81665eb..a5600de6f 100644 --- a/board/esd/voh405/voh405.c +++ b/board/esd/voh405/voh405.c @@ -48,10 +48,6 @@ const unsigned char fpgadata[] = #include "../common/fpga.c" -/* Prototypes */ -int gunzip(void *, int, unsigned char *, unsigned long *); - - /* logo bitmap data - gzip compressed and generated by bin2c */ unsigned char logo_bmp_320[] = { diff --git a/board/esd/wuh405/wuh405.c b/board/esd/wuh405/wuh405.c index f2591d57f..01966eec2 100644 --- a/board/esd/wuh405/wuh405.c +++ b/board/esd/wuh405/wuh405.c @@ -46,10 +46,6 @@ const unsigned char fpgadata[] = #include "../common/fpga.c" -/* Prototypes */ -int gunzip(void *, int, unsigned char *, unsigned long *); - - int board_early_init_f (void) { /* diff --git a/board/mpl/common/common_util.c b/board/mpl/common/common_util.c index 61af4aea1..32bf24493 100644 --- a/board/mpl/common/common_util.c +++ b/board/mpl/common/common_util.c @@ -48,7 +48,6 @@ DECLARE_GLOBAL_DATA_PTR; #define FIRM_START 0xFFF00000 #endif -extern int gunzip(void *, int, uchar *, unsigned long *); extern int mem_test(ulong start, ulong ramsize, int quiet); #define I2C_BACKUP_ADDR 0x7C00 /* 0x200 bytes for backup */ diff --git a/board/prodrive/pdnb3/pdnb3.c b/board/prodrive/pdnb3/pdnb3.c index c323456d6..69f8f9bbc 100644 --- a/board/prodrive/pdnb3/pdnb3.c +++ b/board/prodrive/pdnb3/pdnb3.c @@ -29,7 +29,6 @@ DECLARE_GLOBAL_DATA_PTR; /* Prototypes */ -int gunzip(void *, int, unsigned char *, unsigned long *); int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); /* predefine these here for FPGA programming (before including fpga.c) */ diff --git a/common/cmd_bmp.c b/common/cmd_bmp.c index faa10a414..74ab24ca9 100644 --- a/common/cmd_bmp.c +++ b/common/cmd_bmp.c @@ -35,8 +35,6 @@ static int bmp_info (ulong addr); static int bmp_display (ulong addr, int x, int y); -int gunzip(void *, int, unsigned char *, unsigned long *); - /* * Allocate and decompress a BMP image using gunzip(). * diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c index efd6aec0c..94ddac37c 100644 --- a/common/cmd_bootm.c +++ b/common/cmd_bootm.c @@ -63,7 +63,6 @@ DECLARE_GLOBAL_DATA_PTR; -extern int gunzip (void *dst, int dstlen, unsigned char *src, unsigned long *lenp); #ifndef CONFIG_SYS_BOOTM_LEN #define CONFIG_SYS_BOOTM_LEN 0x800000 /* use 8MByte as default max gunzip size */ #endif diff --git a/common/cmd_license.c b/common/cmd_license.c index c6f272ad3..85a4871de 100644 --- a/common/cmd_license.c +++ b/common/cmd_license.c @@ -29,7 +29,6 @@ #include #include #include -int gunzip(void *, int, unsigned char *, unsigned long *); int do_license(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { diff --git a/common/cmd_mem.c b/common/cmd_mem.c index a34b342f0..183933076 100644 --- a/common/cmd_mem.c +++ b/common/cmd_mem.c @@ -1225,8 +1225,6 @@ int do_sha1sum(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) #endif #ifdef CONFIG_CMD_UNZIP -int gunzip (void *, int, unsigned char *, unsigned long *); - int do_unzip ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { unsigned long src, dst; diff --git a/drivers/video/cfb_console.c b/drivers/video/cfb_console.c index 16d6689f2..c07a26e3c 100644 --- a/drivers/video/cfb_console.c +++ b/drivers/video/cfb_console.c @@ -403,8 +403,6 @@ static const int video_font_draw_table32[16][4] = { { 0x00ffffff, 0x00ffffff, 0x00ffffff, 0x00ffffff } }; -int gunzip(void *, int, unsigned char *, unsigned long *); - /******************************************************************************/ static void video_drawchars (int xx, int yy, unsigned char *s, int count) diff --git a/fs/ubifs/ubifs.h b/fs/ubifs/ubifs.h index 06772af36..0af471afb 100644 --- a/fs/ubifs/ubifs.h +++ b/fs/ubifs/ubifs.h @@ -2140,7 +2140,4 @@ int ubifs_decompress(const void *buf, int len, void *out, int *out_len, /* todo: Move these to a common U-Boot header */ int lzo1x_decompress_safe(const unsigned char *in, size_t in_len, unsigned char *out, size_t *out_len); - -int zunzip(void *dst, int dstlen, unsigned char *src, unsigned long *lenp, - int stoponerr, int offset); #endif /* !__UBIFS_H__ */ diff --git a/include/common.h b/include/common.h index 00b543408..07897f682 100644 --- a/include/common.h +++ b/include/common.h @@ -612,6 +612,11 @@ ulong usec2ticks (unsigned long usec); ulong ticks2usec (unsigned long ticks); int init_timebase (void); +/* lib_generic/gunzip.c */ +int gunzip(void *, int, unsigned char *, unsigned long *); +int zunzip(void *dst, int dstlen, unsigned char *src, unsigned long *lenp, + int stoponerr, int offset); + /* lib_generic/time.c */ void udelay (unsigned long); diff --git a/lib_generic/gunzip.c b/lib_generic/gunzip.c index d59a4482b..d2b7ad477 100644 --- a/lib_generic/gunzip.c +++ b/lib_generic/gunzip.c @@ -36,11 +36,8 @@ #define RESERVED 0xe0 #define DEFLATED 8 -int gunzip(void *, int, unsigned char *, unsigned long *); void *zalloc(void *, unsigned, unsigned); void zfree(void *, void *, unsigned); -int zunzip(void *dst, int dstlen, unsigned char *src, unsigned long *lenp, - int stoponerr, int offset); void *zalloc(void *x, unsigned items, unsigned size) { -- cgit v1.2.3