From 74398b23f9c2ffdc137fd92910a46e3333fb93f9 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Sat, 11 Oct 2008 21:58:33 -0400 Subject: Blackfin: put memory into self-refresh before/after programming clocks When initializing the core clocks, stick external memory into self-refresh. This gains us a few cool things: - support suspend-to-RAM with Linux - reprogram clocks automatically when doing "go" on u-boot.bin in RAM - make sure settings are stable before flashing new version - finally fully unify initialize startup code path between LDR/non-LDR Signed-off-by: Mike Frysinger --- cpu/blackfin/initcode.c | 189 +++++++++++++++++++++++++++++++++++------------- cpu/blackfin/start.S | 83 ++++++++++++--------- 2 files changed, 190 insertions(+), 82 deletions(-) (limited to 'cpu/blackfin') diff --git a/cpu/blackfin/initcode.c b/cpu/blackfin/initcode.c index bbc2fa5be..7bd4b227e 100644 --- a/cpu/blackfin/initcode.c +++ b/cpu/blackfin/initcode.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include #include @@ -257,6 +258,8 @@ void initcode(ADI_BOOT_DATA *bootstruct) divB = serial_early_get_div(); } + serial_putc('A'); + #ifdef CONFIG_HW_WATCHDOG # ifndef CONFIG_HW_WATCHDOG_TIMEOUT_INITCODE # define CONFIG_HW_WATCHDOG_TIMEOUT_INITCODE 20000 @@ -273,7 +276,23 @@ void initcode(ADI_BOOT_DATA *bootstruct) } #endif - serial_putc('S'); + serial_putc('B'); + + /* If external memory is enabled, put it into self refresh first. */ + bool put_into_srfs = false; +#ifdef EBIU_RSTCTL + if (bfin_read_EBIU_RSTCTL() & DDR_SRESET) { + bfin_write_EBIU_RSTCTL(bfin_read_EBIU_RSTCTL() | SRREQ); + put_into_srfs = true; + } +#else + if (bfin_read_EBIU_SDBCTL() & EBE) { + bfin_write_EBIU_SDGCTL(bfin_read_EBIU_SDGCTL() | SRFS); + put_into_srfs = true; + } +#endif + + serial_putc('C'); /* Blackfin bootroms use the SPI slow read opcode instead of the SPI * fast read, so we need to slow down the SPI clock a lot more during @@ -286,29 +305,26 @@ void initcode(ADI_BOOT_DATA *bootstruct) bfin_write_SPI_BAUD(CONFIG_SPI_BAUD_INITBLOCK); } - serial_putc('B'); + serial_putc('D'); - /* Disable all peripheral wakeups except for the PLL event. */ -#ifdef SIC_IWR0 - bfin_write_SIC_IWR0(1); - bfin_write_SIC_IWR1(0); -# ifdef SIC_IWR2 - bfin_write_SIC_IWR2(0); -# endif -#elif defined(SICA_IWR0) - bfin_write_SICA_IWR0(1); - bfin_write_SICA_IWR1(0); + /* If we're entering self refresh, make sure it has happened. */ + if (put_into_srfs) +#ifdef EBIU_RSTCTL + while (!(bfin_read_EBIU_RSTCTL() & SRACK)) #else - bfin_write_SIC_IWR(1); + while (!(bfin_read_EBIU_SDSTAT() & SDSRA)) #endif + continue; + + serial_putc('E'); /* With newer bootroms, we use the helper function to set up * the memory controller. Older bootroms lacks such helpers * so we do it ourselves. */ -#define BOOTROM_CAPS_SYSCONTROL 0 - if (BOOTROM_CAPS_SYSCONTROL) { - serial_putc('S'); + uint16_t vr_ctl = bfin_read_VR_CTL(); + if (!ANOMALY_05000386) { + serial_putc('F'); ADI_SYSCTRL_VALUES memory_settings; uint32_t actions = SYSCTRL_WRITE | SYSCTRL_PLLCTL | SYSCTRL_PLLDIV | SYSCTRL_LOCKCNT; @@ -332,22 +348,38 @@ void initcode(ADI_BOOT_DATA *bootstruct) bfin_write_SIC_IWR1(-1); #endif } else { - serial_putc('L'); + serial_putc('G'); + + /* Disable all peripheral wakeups except for the PLL event. */ +#ifdef SIC_IWR0 + bfin_write_SIC_IWR0(1); + bfin_write_SIC_IWR1(0); +# ifdef SIC_IWR2 + bfin_write_SIC_IWR2(0); +# endif +#elif defined(SICA_IWR0) + bfin_write_SICA_IWR0(1); + bfin_write_SICA_IWR1(0); +#else + bfin_write_SIC_IWR(1); +#endif + + serial_putc('H'); bfin_write_PLL_LOCKCNT(CONFIG_PLL_LOCKCNT_VAL); - serial_putc('A'); + serial_putc('I'); /* Only reprogram when needed to avoid triggering unnecessary * PLL relock sequences. */ - if (bfin_read_VR_CTL() != CONFIG_VR_CTL_VAL) { + if (vr_ctl != CONFIG_VR_CTL_VAL) { serial_putc('!'); bfin_write_VR_CTL(CONFIG_VR_CTL_VAL); asm("idle;"); } - serial_putc('C'); + serial_putc('J'); bfin_write_PLL_DIV(CONFIG_PLL_DIV_VAL); @@ -361,8 +393,26 @@ void initcode(ADI_BOOT_DATA *bootstruct) bfin_write_PLL_CTL(CONFIG_PLL_CTL_VAL); asm("idle;"); } + + serial_putc('L'); + + /* Restore all peripheral wakeups. */ +#ifdef SIC_IWR0 + bfin_write_SIC_IWR0(-1); + bfin_write_SIC_IWR1(-1); +# ifdef SIC_IWR2 + bfin_write_SIC_IWR2(-1); +# endif +#elif defined(SICA_IWR0) + bfin_write_SICA_IWR0(-1); + bfin_write_SICA_IWR1(-1); +#else + bfin_write_SIC_IWR(-1); +#endif } + serial_putc('M'); + /* Since we've changed the SCLK above, we may need to update * the UART divisors (UART baud rates are based on SCLK). * Do the division by hand as there are no native instructions @@ -380,23 +430,32 @@ void initcode(ADI_BOOT_DATA *bootstruct) serial_early_put_div(quotient - ANOMALY_05000230); } - serial_putc('F'); + serial_putc('N'); - /* Program the async banks controller. */ - bfin_write_EBIU_AMBCTL0(CONFIG_EBIU_AMBCTL0_VAL); - bfin_write_EBIU_AMBCTL1(CONFIG_EBIU_AMBCTL1_VAL); - bfin_write_EBIU_AMGCTL(CONFIG_EBIU_AMGCTL_VAL); + /* Program the external memory controller before we come out of + * self-refresh. This only works with our SDRAM controller. + */ +#ifndef EBIU_RSTCTL + bfin_write_EBIU_SDRRC(CONFIG_EBIU_SDRRC_VAL); + bfin_write_EBIU_SDBCTL(CONFIG_EBIU_SDBCTL_VAL); + bfin_write_EBIU_SDGCTL(CONFIG_EBIU_SDGCTL_VAL); +#endif -#ifdef EBIU_MODE - /* Not all parts have these additional MMRs. */ - bfin_write_EBIU_MBSCTL(CONFIG_EBIU_MBSCTL_VAL); - bfin_write_EBIU_MODE(CONFIG_EBIU_MODE_VAL); - bfin_write_EBIU_FCTL(CONFIG_EBIU_FCTL_VAL); + serial_putc('O'); + + /* Now that we've reprogrammed, take things out of self refresh. */ + if (put_into_srfs) +#ifdef EBIU_RSTCTL + bfin_write_EBIU_RSTCTL(bfin_read_EBIU_RSTCTL() & ~(SRREQ)); +#else + bfin_write_EBIU_SDGCTL(bfin_read_EBIU_SDGCTL() & ~(SRFS)); #endif - serial_putc('I'); + serial_putc('P'); - /* Program the external memory controller. */ + /* Our DDR controller sucks and cannot be programmed while in + * self-refresh. So we have to pull it out before programming. + */ #ifdef EBIU_RSTCTL bfin_write_EBIU_RSTCTL(bfin_read_EBIU_RSTCTL() | 0x1 /*DDRSRESET*/ | CONFIG_EBIU_RSTCTL_VAL); bfin_write_EBIU_DDRCTL0(CONFIG_EBIU_DDRCTL0_VAL); @@ -406,28 +465,60 @@ void initcode(ADI_BOOT_DATA *bootstruct) /* default is disable, so don't need to force this */ bfin_write_EBIU_DDRCTL3(CONFIG_EBIU_DDRCTL3_VAL); # endif -#else - bfin_write_EBIU_SDRRC(CONFIG_EBIU_SDRRC_VAL); - bfin_write_EBIU_SDBCTL(CONFIG_EBIU_SDBCTL_VAL); - bfin_write_EBIU_SDGCTL(CONFIG_EBIU_SDGCTL_VAL); +# ifdef CONFIG_EBIU_DDRQUE_VAL + bfin_write_EBIU_DDRQUE(bfin_read_EBIU_DDRQUE() | CONFIG_EBIU_DDRQUE_VAL); +# endif #endif - serial_putc('N'); + serial_putc('Q'); - /* Restore all peripheral wakeups. */ -#ifdef SIC_IWR0 - bfin_write_SIC_IWR0(-1); - bfin_write_SIC_IWR1(-1); -# ifdef SIC_IWR2 - bfin_write_SIC_IWR2(-1); -# endif -#elif defined(SICA_IWR0) - bfin_write_SICA_IWR0(-1); - bfin_write_SICA_IWR1(-1); -#else - bfin_write_SIC_IWR(-1); + /* Are we coming out of hibernate (suspend to memory) ? + * The memory layout is: + * 0x0: hibernate magic for anomaly 307 (0xDEADBEEF) + * 0x4: return address + * 0x8: stack pointer + * + * SCKELOW is unreliable on older parts (anomaly 307) + */ + if (ANOMALY_05000307 || vr_ctl & 0x8000) { + uint32_t *hibernate_magic = 0; + __builtin_bfin_ssync(); /* make sure memory controller is done */ + if (hibernate_magic[0] == 0xDEADBEEF) { + serial_putc('R'); + bfin_write_EVT15(hibernate_magic[1]); + bfin_write_IMASK(EVT_IVG15); + __asm__ __volatile__ ( + /* load reti early to avoid anomaly 281 */ + "reti = %0;" + /* clear hibernate magic */ + "[%0] = %1;" + /* load stack pointer */ + "SP = [%0 + 8];" + /* lower ourselves from reset ivg to ivg15 */ + "raise 15;" + "rti;" + : + : "p"(hibernate_magic), "d"(0x2000 /* jump.s 0 */) + ); + } + } + + serial_putc('S'); + + /* Program the async banks controller. */ + bfin_write_EBIU_AMBCTL0(CONFIG_EBIU_AMBCTL0_VAL); + bfin_write_EBIU_AMBCTL1(CONFIG_EBIU_AMBCTL1_VAL); + bfin_write_EBIU_AMGCTL(CONFIG_EBIU_AMGCTL_VAL); + +#ifdef EBIU_MODE + /* Not all parts have these additional MMRs. */ + bfin_write_EBIU_MBSCTL(CONFIG_EBIU_MBSCTL_VAL); + bfin_write_EBIU_MODE(CONFIG_EBIU_MODE_VAL); + bfin_write_EBIU_FCTL(CONFIG_EBIU_FCTL_VAL); #endif + serial_putc('T'); + /* tell the bootrom where our entry point is */ if (CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_BYPASS) bfin_write_EVT1(CONFIG_SYS_MONITOR_BASE); diff --git a/cpu/blackfin/start.S b/cpu/blackfin/start.S index 6c8def481..506fea58c 100644 --- a/cpu/blackfin/start.S +++ b/cpu/blackfin/start.S @@ -95,36 +95,64 @@ ENTRY(_start) /* Save RETX so we can pass it while booting Linux */ r7 = RETX; -#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS) - /* In bypass mode, we don't have an LDR with an init block - * so we need to explicitly call it ourselves. This will - * reprogram our clocks and setup our async banks. - */ - /* XXX: we should DMA this into L1, put external memory into - * self refresh, and then jump there ... + /* Figure out where we are currently executing so that we can decide + * how to best reprogram and relocate things. We'll pass below: + * R4: load address of _start + * R5: current (not load) address of _start */ + serial_early_puts("Find ourselves"); + call _get_pc; - r3 = 0x0; - r3.h = 0x2000; - cc = r0 < r3 (iu); - if cc jump .Lproc_initialized; +.Loffset: + r1.l = .Loffset; + r1.h = .Loffset; + r4.l = _start; + r4.h = _start; + r3 = r1 - r4; + r5 = r0 - r3; + + /* Inform upper layers if we had to do the relocation ourselves. + * This allows us to detect whether we were loaded by 'go 0x1000' + * or by the bootrom from an LDR. "R6" is "loaded_from_ldr". + */ + r6 = 1 (x); + cc = r4 == r5; + if cc jump .Lnorelocate; + r6 = 0 (x); + /* In bypass mode, we don't have an LDR with an init block + * so we need to explicitly call it ourselves. This will + * reprogram our clocks, memory, and setup our async banks. + */ serial_early_puts("Program Clocks"); + /* if we're executing >=0x20000000, then we dont need to dma */ + r3 = 0x0; + r3.h = 0x2000; + cc = r5 < r3 (iu); + if cc jump .Ldma_and_reprogram; call _initcode; + jump .Lprogrammed; + + /* we're sitting in external memory, so dma into L1 and reprogram */ +.Ldma_and_reprogram: + r0.l = LO(L1_INST_SRAM); + r0.h = HI(L1_INST_SRAM); + r1.l = __initcode_start; + r1.h = __initcode_start; + r2.l = __initcode_end; + r2.h = __initcode_end; + r2 = r2 - r1; /* convert r2 into length of initcode */ + r1 = r1 - r4; /* convert r1 from load address of initcode ... */ + r1 = r1 + r5; /* ... to current (not load) address of initcode */ + p3 = r0; + call _dma_memcpy_nocache; + call (p3); /* Since we reprogrammed SCLK, we need to update the serial divisor */ +.Lprogrammed: serial_early_set_baud -.Lproc_initialized: -#endif - - /* Inform upper layers if we had to do the relocation ourselves. - * This allows us to detect whether we were loaded by 'go 0x1000' - * or by the bootrom from an LDR. "r6" is "loaded_from_ldr". - */ - r6 = 1 (x); - /* Relocate from wherever we are (FLASH/RAM/etc...) to the hardcoded * monitor location in the end of RAM. We know that memcpy() only * uses registers, so it is safe to call here. Note that this only @@ -132,19 +160,8 @@ ENTRY(_start) * it yet (see "lower to 15" below). */ serial_early_puts("Relocate"); - call _get_pc; -.Loffset: - r2.l = .Loffset; - r2.h = .Loffset; - r3.l = _start; - r3.h = _start; - r2 = r2 - r3; - r1 = r0 - r2; - cc = r1 == r3; - if cc jump .Lnorelocate; - r6 = 0 (x); - - r0 = r3; + r0 = r4; + r1 = r5; r2.l = LO(CONFIG_SYS_MONITOR_LEN); r2.h = HI(CONFIG_SYS_MONITOR_LEN); call _memcpy_ASM; -- cgit v1.2.3