From f5a77a09c93fe7f04c0c56f64ea436f7d318d674 Mon Sep 17 00:00:00 2001 From: Graeme Russ Date: Tue, 24 Feb 2009 21:11:24 +1100 Subject: Moved SC520 Files (fix commit 407976185e0dda2c90e89027121a1071b9c77bfb) Fixes commit 407976185e0dda2c90e89027121a1071b9c77bfb Signed-off-by: Graeme Russ --- cpu/i386/Makefile | 3 +- cpu/i386/sc520.c | 516 --------------------------------------- cpu/i386/sc520/Makefile | 52 ++++ cpu/i386/sc520/sc520.c | 516 +++++++++++++++++++++++++++++++++++++++ cpu/i386/sc520/sc520_asm.S | 581 ++++++++++++++++++++++++++++++++++++++++++++ cpu/i386/sc520_asm.S | 584 --------------------------------------------- 6 files changed, 1150 insertions(+), 1102 deletions(-) delete mode 100644 cpu/i386/sc520.c create mode 100644 cpu/i386/sc520/Makefile create mode 100644 cpu/i386/sc520/sc520.c create mode 100644 cpu/i386/sc520/sc520_asm.S delete mode 100644 cpu/i386/sc520_asm.S (limited to 'cpu/i386') diff --git a/cpu/i386/Makefile b/cpu/i386/Makefile index f20675af1..761c4f6fc 100644 --- a/cpu/i386/Makefile +++ b/cpu/i386/Makefile @@ -29,8 +29,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(CPU).a START = start.o start16.o resetvec.o -COBJS = serial.o interrupts.o cpu.o timer.o sc520.o -SOBJS = sc520_asm.o +COBJS = serial.o interrupts.o cpu.o timer.o SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) diff --git a/cpu/i386/sc520.c b/cpu/i386/sc520.c deleted file mode 100644 index b958f8dc0..000000000 --- a/cpu/i386/sc520.c +++ /dev/null @@ -1,516 +0,0 @@ -/* - * (C) Copyright 2002 - * Daniel Engström, Omicron Ceti AB . - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* stuff specific for the sc520, - * but idependent of implementation */ - -#include -#include -#include -#include -#ifdef CONFIG_SC520_SSI -#include -#endif -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -/* - * utility functions for boards based on the AMD sc520 - * - * void write_mmcr_byte(u16 mmcr, u8 data) - * void write_mmcr_word(u16 mmcr, u16 data) - * void write_mmcr_long(u16 mmcr, u32 data) - * - * u8 read_mmcr_byte(u16 mmcr) - * u16 read_mmcr_word(u16 mmcr) - * u32 read_mmcr_long(u16 mmcr) - * - * void init_sc520(void) - * unsigned long init_sc520_dram(void) - * void pci_sc520_init(struct pci_controller *hose) - * - * void reset_timer(void) - * ulong get_timer(ulong base) - * void set_timer(ulong t) - * void udelay(unsigned long usec) - * - */ - -static u32 mmcr_base= 0xfffef000; - -void write_mmcr_byte(u16 mmcr, u8 data) -{ - writeb(data, mmcr+mmcr_base); -} - -void write_mmcr_word(u16 mmcr, u16 data) -{ - writew(data, mmcr+mmcr_base); -} - -void write_mmcr_long(u16 mmcr, u32 data) -{ - writel(data, mmcr+mmcr_base); -} - -u8 read_mmcr_byte(u16 mmcr) -{ - return readb(mmcr+mmcr_base); -} - -u16 read_mmcr_word(u16 mmcr) -{ - return readw(mmcr+mmcr_base); -} - -u32 read_mmcr_long(u16 mmcr) -{ - return readl(mmcr+mmcr_base); -} - - -void init_sc520(void) -{ - /* Set the UARTxCTL register at it's slower, - * baud clock giving us a 1.8432 MHz reference - */ - write_mmcr_byte(SC520_UART1CTL, 7); - write_mmcr_byte(SC520_UART2CTL, 7); - - /* first set the timer pin mapping */ - write_mmcr_byte(SC520_CLKSEL, 0x72); /* no clock frequency selected, use 1.1892MHz */ - - /* enable PCI bus arbitrer */ - write_mmcr_byte(SC520_SYSARBCTL,0x02); /* enable concurrent mode */ - - write_mmcr_word(SC520_SYSARBMENB,0x1f); /* enable external grants */ - write_mmcr_word(SC520_HBCTL,0x04); /* enable posted-writes */ - - - if (CONFIG_SYS_SC520_HIGH_SPEED) { - write_mmcr_byte(SC520_CPUCTL, 0x2); /* set it to 133 MHz and write back */ - gd->cpu_clk = 133000000; - printf("## CPU Speed set to 133MHz\n"); - } else { - write_mmcr_byte(SC520_CPUCTL, 1); /* set CPU to 100 MHz and write back cache */ - printf("## CPU Speed set to 100MHz\n"); - gd->cpu_clk = 100000000; - } - - - /* wait at least one millisecond */ - asm("movl $0x2000,%%ecx\n" - "wait_loop: pushl %%ecx\n" - "popl %%ecx\n" - "loop wait_loop\n": : : "ecx"); - - /* turn on the SDRAM write buffer */ - write_mmcr_byte(SC520_DBCTL, 0x11); - - /* turn on the cache and disable write through */ - asm("movl %%cr0, %%eax\n" - "andl $0x9fffffff, %%eax\n" - "movl %%eax, %%cr0\n" : : : "eax"); -} - -unsigned long init_sc520_dram(void) -{ - bd_t *bd = gd->bd; - - u32 dram_present=0; - u32 dram_ctrl; -#ifdef CONFIG_SYS_SDRAM_DRCTMCTL - /* these memory control registers are set up in the assember part, - * in sc520_asm.S, during 'mem_init'. If we muck with them here, - * after we are running a stack in RAM, we have troubles. Besides, - * these refresh and delay values are better ? simply specified - * outright in the include/configs/{cfg} file since the HW designer - * simply dictates it. - */ -#else - int val; - - int cas_precharge_delay = CONFIG_SYS_SDRAM_PRECHARGE_DELAY; - int refresh_rate = CONFIG_SYS_SDRAM_REFRESH_RATE; - int ras_cas_delay = CONFIG_SYS_SDRAM_RAS_CAS_DELAY; - - /* set SDRAM speed here */ - - refresh_rate/=78; - if (refresh_rate<=1) { - val = 0; /* 7.8us */ - } else if (refresh_rate==2) { - val = 1; /* 15.6us */ - } else if (refresh_rate==3 || refresh_rate==4) { - val = 2; /* 31.2us */ - } else { - val = 3; /* 62.4us */ - } - - write_mmcr_byte(SC520_DRCCTL, (read_mmcr_byte(SC520_DRCCTL) & 0xcf) | (val<<4)); - - val = read_mmcr_byte(SC520_DRCTMCTL); - val &= 0xf0; - - if (cas_precharge_delay==3) { - val |= 0x04; /* 3T */ - } else if (cas_precharge_delay==4) { - val |= 0x08; /* 4T */ - } else if (cas_precharge_delay>4) { - val |= 0x0c; - } - - if (ras_cas_delay > 3) { - val |= 2; - } else { - val |= 1; - } - write_mmcr_byte(SC520_DRCTMCTL, val); -#endif - - /* We read-back the configuration of the dram - * controller that the assembly code wrote */ - dram_ctrl = read_mmcr_long(SC520_DRCBENDADR); - - bd->bi_dram[0].start = 0; - if (dram_ctrl & 0x80) { - /* bank 0 enabled */ - dram_present = bd->bi_dram[1].start = (dram_ctrl & 0x7f) << 22; - bd->bi_dram[0].size = bd->bi_dram[1].start; - - } else { - bd->bi_dram[0].size = 0; - bd->bi_dram[1].start = bd->bi_dram[0].start; - } - - if (dram_ctrl & 0x8000) { - /* bank 1 enabled */ - dram_present = bd->bi_dram[2].start = (dram_ctrl & 0x7f00) << 14; - bd->bi_dram[1].size = bd->bi_dram[2].start - bd->bi_dram[1].start; - } else { - bd->bi_dram[1].size = 0; - bd->bi_dram[2].start = bd->bi_dram[1].start; - } - - if (dram_ctrl & 0x800000) { - /* bank 2 enabled */ - dram_present = bd->bi_dram[3].start = (dram_ctrl & 0x7f0000) << 6; - bd->bi_dram[2].size = bd->bi_dram[3].start - bd->bi_dram[2].start; - } else { - bd->bi_dram[2].size = 0; - bd->bi_dram[3].start = bd->bi_dram[2].start; - } - - if (dram_ctrl & 0x80000000) { - /* bank 3 enabled */ - dram_present = (dram_ctrl & 0x7f000000) >> 2; - bd->bi_dram[3].size = dram_present - bd->bi_dram[3].start; - } else { - bd->bi_dram[3].size = 0; - } - - -#if 0 - printf("Configured %d bytes of dram\n", dram_present); -#endif - gd->ram_size = dram_present; - - return dram_present; -} - - -#ifdef CONFIG_PCI - - -static struct { - u8 priority; - u16 level_reg; - u8 level_bit; -} sc520_irq[] = { - { SC520_IRQ0, SC520_MPICMODE, 0x01 }, - { SC520_IRQ1, SC520_MPICMODE, 0x02 }, - { SC520_IRQ2, SC520_SL1PICMODE, 0x02 }, - { SC520_IRQ3, SC520_MPICMODE, 0x08 }, - { SC520_IRQ4, SC520_MPICMODE, 0x10 }, - { SC520_IRQ5, SC520_MPICMODE, 0x20 }, - { SC520_IRQ6, SC520_MPICMODE, 0x40 }, - { SC520_IRQ7, SC520_MPICMODE, 0x80 }, - - { SC520_IRQ8, SC520_SL1PICMODE, 0x01 }, - { SC520_IRQ9, SC520_SL1PICMODE, 0x02 }, - { SC520_IRQ10, SC520_SL1PICMODE, 0x04 }, - { SC520_IRQ11, SC520_SL1PICMODE, 0x08 }, - { SC520_IRQ12, SC520_SL1PICMODE, 0x10 }, - { SC520_IRQ13, SC520_SL1PICMODE, 0x20 }, - { SC520_IRQ14, SC520_SL1PICMODE, 0x40 }, - { SC520_IRQ15, SC520_SL1PICMODE, 0x80 } -}; - - -/* The interrupt used for PCI INTA-INTD */ -int sc520_pci_ints[15] = { - -1, -1, -1, -1, -1, -1, -1, -1, - -1, -1, -1, -1, -1, -1, -1 -}; - -/* utility function to configure a pci interrupt */ -int pci_sc520_set_irq(int pci_pin, int irq) -{ - int i; - -# if 1 - printf("set_irq(): map INT%c to IRQ%d\n", pci_pin + 'A', irq); -#endif - if (irq < 0 || irq > 15) { - return -1; /* illegal irq */ - } - - if (pci_pin < 0 || pci_pin > 15) { - return -1; /* illegal pci int pin */ - } - - /* first disable any non-pci interrupt source that use - * this level */ - for (i=SC520_GPTMR0MAP;i<=SC520_GP10IMAP;i++) { - if (i>=SC520_PCIINTAMAP&&i<=SC520_PCIINTDMAP) { - continue; - } - if (read_mmcr_byte(i) == sc520_irq[irq].priority) { - write_mmcr_byte(i, SC520_IRQ_DISABLED); - } - } - - /* Set the trigger to level */ - write_mmcr_byte(sc520_irq[irq].level_reg, - read_mmcr_byte(sc520_irq[irq].level_reg) | sc520_irq[irq].level_bit); - - - if (pci_pin < 4) { - /* PCI INTA-INTD */ - /* route the interrupt */ - write_mmcr_byte(SC520_PCIINTAMAP + pci_pin, sc520_irq[irq].priority); - - - } else { - /* GPIRQ0-GPIRQ10 used for additional PCI INTS */ - write_mmcr_byte(SC520_GP0IMAP + pci_pin - 4, sc520_irq[irq].priority); - - /* also set the polarity in this case */ - write_mmcr_word(SC520_INTPINPOL, - read_mmcr_word(SC520_INTPINPOL) | (1 << (pci_pin-4))); - - } - - /* register the pin */ - sc520_pci_ints[pci_pin] = irq; - - - return 0; /* OK */ -} - -void pci_sc520_init(struct pci_controller *hose) -{ - hose->first_busno = 0; - hose->last_busno = 0xff; - - /* System memory space */ - pci_set_region(hose->regions + 0, - SC520_PCI_MEMORY_BUS, - SC520_PCI_MEMORY_PHYS, - SC520_PCI_MEMORY_SIZE, - PCI_REGION_MEM | PCI_REGION_SYS_MEMORY); - - /* PCI memory space */ - pci_set_region(hose->regions + 1, - SC520_PCI_MEM_BUS, - SC520_PCI_MEM_PHYS, - SC520_PCI_MEM_SIZE, - PCI_REGION_MEM); - - /* ISA/PCI memory space */ - pci_set_region(hose->regions + 2, - SC520_ISA_MEM_BUS, - SC520_ISA_MEM_PHYS, - SC520_ISA_MEM_SIZE, - PCI_REGION_MEM); - - /* PCI I/O space */ - pci_set_region(hose->regions + 3, - SC520_PCI_IO_BUS, - SC520_PCI_IO_PHYS, - SC520_PCI_IO_SIZE, - PCI_REGION_IO); - - /* ISA/PCI I/O space */ - pci_set_region(hose->regions + 4, - SC520_ISA_IO_BUS, - SC520_ISA_IO_PHYS, - SC520_ISA_IO_SIZE, - PCI_REGION_IO); - - hose->region_count = 5; - - pci_setup_type1(hose, - SC520_REG_ADDR, - SC520_REG_DATA); - - pci_register_hose(hose); - - hose->last_busno = pci_hose_scan(hose); - - /* enable target memory acceses on host brige */ - pci_write_config_word(0, PCI_COMMAND, - PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); - -} - - -#endif - -#ifdef CONFIG_SYS_TIMER_SC520 - - -void reset_timer(void) -{ - write_mmcr_word(SC520_GPTMR0CNT, 0); - write_mmcr_word(SC520_GPTMR0CTL, 0x6001); - -} - -ulong get_timer(ulong base) -{ - /* fixme: 30 or 33 */ - return read_mmcr_word(SC520_GPTMR0CNT) / 33; -} - -void set_timer(ulong t) -{ - /* FixMe: use two cascade coupled timers */ - write_mmcr_word(SC520_GPTMR0CTL, 0x4001); - write_mmcr_word(SC520_GPTMR0CNT, t*33); - write_mmcr_word(SC520_GPTMR0CTL, 0x6001); -} - - -void udelay(unsigned long usec) -{ - int m=0; - long u; - - read_mmcr_word(SC520_SWTMRMILLI); - read_mmcr_word(SC520_SWTMRMICRO); - -#if 0 - /* do not enable this line, udelay is used in the serial driver -> recursion */ - printf("udelay: %ld m.u %d.%d tm.tu %d.%d\n", usec, m, u, tm, tu); -#endif - while (1) { - - m += read_mmcr_word(SC520_SWTMRMILLI); - u = read_mmcr_word(SC520_SWTMRMICRO) + (m * 1000); - - if (usec <= u) { - break; - } - } -} - -#endif - -int ssi_set_interface(int freq, int lsb_first, int inv_clock, int inv_phase) -{ - u8 temp=0; - - if (freq >= 8192) { - temp |= CTL_CLK_SEL_4; - } else if (freq >= 4096) { - temp |= CTL_CLK_SEL_8; - } else if (freq >= 2048) { - temp |= CTL_CLK_SEL_16; - } else if (freq >= 1024) { - temp |= CTL_CLK_SEL_32; - } else if (freq >= 512) { - temp |= CTL_CLK_SEL_64; - } else if (freq >= 256) { - temp |= CTL_CLK_SEL_128; - } else if (freq >= 128) { - temp |= CTL_CLK_SEL_256; - } else { - temp |= CTL_CLK_SEL_512; - } - - if (!lsb_first) { - temp |= MSBF_ENB; - } - - if (inv_clock) { - temp |= CLK_INV_ENB; - } - - if (inv_phase) { - temp |= PHS_INV_ENB; - } - - write_mmcr_byte(SC520_SSICTL, temp); - - return 0; -} - -u8 ssi_txrx_byte(u8 data) -{ - write_mmcr_byte(SC520_SSIXMIT, data); - while ((read_mmcr_byte(SC520_SSISTA)) & SSISTA_BSY); - write_mmcr_byte(SC520_SSICMD, SSICMD_CMD_SEL_XMITRCV); - while ((read_mmcr_byte(SC520_SSISTA)) & SSISTA_BSY); - return read_mmcr_byte(SC520_SSIRCV); -} - - -void ssi_tx_byte(u8 data) -{ - write_mmcr_byte(SC520_SSIXMIT, data); - while ((read_mmcr_byte(SC520_SSISTA)) & SSISTA_BSY); - write_mmcr_byte(SC520_SSICMD, SSICMD_CMD_SEL_XMIT); -} - -u8 ssi_rx_byte(void) -{ - while ((read_mmcr_byte(SC520_SSISTA)) & SSISTA_BSY); - write_mmcr_byte(SC520_SSICMD, SSICMD_CMD_SEL_RCV); - while ((read_mmcr_byte(SC520_SSISTA)) & SSISTA_BSY); - return read_mmcr_byte(SC520_SSIRCV); -} - -#ifdef CONFIG_SYS_RESET_SC520 -void reset_cpu(ulong addr) -{ - printf("Resetting using SC520 MMCR\n"); - /* Write a '1' to the SYS_RST of the RESCFG MMCR */ - write_mmcr_word(SC520_RESCFG, 0x0001); - - /* NOTREACHED */ -} -#endif diff --git a/cpu/i386/sc520/Makefile b/cpu/i386/sc520/Makefile new file mode 100644 index 000000000..ddfec23f6 --- /dev/null +++ b/cpu/i386/sc520/Makefile @@ -0,0 +1,52 @@ +# +# (C) Copyright 2008 +# Graeme Russ, graeme.russ@gmail.com. +# +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# (C) Copyright 2002 +# Daniel Engström, Omicron Ceti AB, daniel@omicron.se. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB := $(obj)lib$(SOC).a + +COBJS-$(CONFIG_SYS_SC520) += sc520.o +SOBJS-$(CONFIG_SYS_SC520) += sc520_asm.o + +SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y)) + +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### \ No newline at end of file diff --git a/cpu/i386/sc520/sc520.c b/cpu/i386/sc520/sc520.c new file mode 100644 index 000000000..b958f8dc0 --- /dev/null +++ b/cpu/i386/sc520/sc520.c @@ -0,0 +1,516 @@ +/* + * (C) Copyright 2002 + * Daniel Engström, Omicron Ceti AB . + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* stuff specific for the sc520, + * but idependent of implementation */ + +#include +#include +#include +#include +#ifdef CONFIG_SC520_SSI +#include +#endif +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +/* + * utility functions for boards based on the AMD sc520 + * + * void write_mmcr_byte(u16 mmcr, u8 data) + * void write_mmcr_word(u16 mmcr, u16 data) + * void write_mmcr_long(u16 mmcr, u32 data) + * + * u8 read_mmcr_byte(u16 mmcr) + * u16 read_mmcr_word(u16 mmcr) + * u32 read_mmcr_long(u16 mmcr) + * + * void init_sc520(void) + * unsigned long init_sc520_dram(void) + * void pci_sc520_init(struct pci_controller *hose) + * + * void reset_timer(void) + * ulong get_timer(ulong base) + * void set_timer(ulong t) + * void udelay(unsigned long usec) + * + */ + +static u32 mmcr_base= 0xfffef000; + +void write_mmcr_byte(u16 mmcr, u8 data) +{ + writeb(data, mmcr+mmcr_base); +} + +void write_mmcr_word(u16 mmcr, u16 data) +{ + writew(data, mmcr+mmcr_base); +} + +void write_mmcr_long(u16 mmcr, u32 data) +{ + writel(data, mmcr+mmcr_base); +} + +u8 read_mmcr_byte(u16 mmcr) +{ + return readb(mmcr+mmcr_base); +} + +u16 read_mmcr_word(u16 mmcr) +{ + return readw(mmcr+mmcr_base); +} + +u32 read_mmcr_long(u16 mmcr) +{ + return readl(mmcr+mmcr_base); +} + + +void init_sc520(void) +{ + /* Set the UARTxCTL register at it's slower, + * baud clock giving us a 1.8432 MHz reference + */ + write_mmcr_byte(SC520_UART1CTL, 7); + write_mmcr_byte(SC520_UART2CTL, 7); + + /* first set the timer pin mapping */ + write_mmcr_byte(SC520_CLKSEL, 0x72); /* no clock frequency selected, use 1.1892MHz */ + + /* enable PCI bus arbitrer */ + write_mmcr_byte(SC520_SYSARBCTL,0x02); /* enable concurrent mode */ + + write_mmcr_word(SC520_SYSARBMENB,0x1f); /* enable external grants */ + write_mmcr_word(SC520_HBCTL,0x04); /* enable posted-writes */ + + + if (CONFIG_SYS_SC520_HIGH_SPEED) { + write_mmcr_byte(SC520_CPUCTL, 0x2); /* set it to 133 MHz and write back */ + gd->cpu_clk = 133000000; + printf("## CPU Speed set to 133MHz\n"); + } else { + write_mmcr_byte(SC520_CPUCTL, 1); /* set CPU to 100 MHz and write back cache */ + printf("## CPU Speed set to 100MHz\n"); + gd->cpu_clk = 100000000; + } + + + /* wait at least one millisecond */ + asm("movl $0x2000,%%ecx\n" + "wait_loop: pushl %%ecx\n" + "popl %%ecx\n" + "loop wait_loop\n": : : "ecx"); + + /* turn on the SDRAM write buffer */ + write_mmcr_byte(SC520_DBCTL, 0x11); + + /* turn on the cache and disable write through */ + asm("movl %%cr0, %%eax\n" + "andl $0x9fffffff, %%eax\n" + "movl %%eax, %%cr0\n" : : : "eax"); +} + +unsigned long init_sc520_dram(void) +{ + bd_t *bd = gd->bd; + + u32 dram_present=0; + u32 dram_ctrl; +#ifdef CONFIG_SYS_SDRAM_DRCTMCTL + /* these memory control registers are set up in the assember part, + * in sc520_asm.S, during 'mem_init'. If we muck with them here, + * after we are running a stack in RAM, we have troubles. Besides, + * these refresh and delay values are better ? simply specified + * outright in the include/configs/{cfg} file since the HW designer + * simply dictates it. + */ +#else + int val; + + int cas_precharge_delay = CONFIG_SYS_SDRAM_PRECHARGE_DELAY; + int refresh_rate = CONFIG_SYS_SDRAM_REFRESH_RATE; + int ras_cas_delay = CONFIG_SYS_SDRAM_RAS_CAS_DELAY; + + /* set SDRAM speed here */ + + refresh_rate/=78; + if (refresh_rate<=1) { + val = 0; /* 7.8us */ + } else if (refresh_rate==2) { + val = 1; /* 15.6us */ + } else if (refresh_rate==3 || refresh_rate==4) { + val = 2; /* 31.2us */ + } else { + val = 3; /* 62.4us */ + } + + write_mmcr_byte(SC520_DRCCTL, (read_mmcr_byte(SC520_DRCCTL) & 0xcf) | (val<<4)); + + val = read_mmcr_byte(SC520_DRCTMCTL); + val &= 0xf0; + + if (cas_precharge_delay==3) { + val |= 0x04; /* 3T */ + } else if (cas_precharge_delay==4) { + val |= 0x08; /* 4T */ + } else if (cas_precharge_delay>4) { + val |= 0x0c; + } + + if (ras_cas_delay > 3) { + val |= 2; + } else { + val |= 1; + } + write_mmcr_byte(SC520_DRCTMCTL, val); +#endif + + /* We read-back the configuration of the dram + * controller that the assembly code wrote */ + dram_ctrl = read_mmcr_long(SC520_DRCBENDADR); + + bd->bi_dram[0].start = 0; + if (dram_ctrl & 0x80) { + /* bank 0 enabled */ + dram_present = bd->bi_dram[1].start = (dram_ctrl & 0x7f) << 22; + bd->bi_dram[0].size = bd->bi_dram[1].start; + + } else { + bd->bi_dram[0].size = 0; + bd->bi_dram[1].start = bd->bi_dram[0].start; + } + + if (dram_ctrl & 0x8000) { + /* bank 1 enabled */ + dram_present = bd->bi_dram[2].start = (dram_ctrl & 0x7f00) << 14; + bd->bi_dram[1].size = bd->bi_dram[2].start - bd->bi_dram[1].start; + } else { + bd->bi_dram[1].size = 0; + bd->bi_dram[2].start = bd->bi_dram[1].start; + } + + if (dram_ctrl & 0x800000) { + /* bank 2 enabled */ + dram_present = bd->bi_dram[3].start = (dram_ctrl & 0x7f0000) << 6; + bd->bi_dram[2].size = bd->bi_dram[3].start - bd->bi_dram[2].start; + } else { + bd->bi_dram[2].size = 0; + bd->bi_dram[3].start = bd->bi_dram[2].start; + } + + if (dram_ctrl & 0x80000000) { + /* bank 3 enabled */ + dram_present = (dram_ctrl & 0x7f000000) >> 2; + bd->bi_dram[3].size = dram_present - bd->bi_dram[3].start; + } else { + bd->bi_dram[3].size = 0; + } + + +#if 0 + printf("Configured %d bytes of dram\n", dram_present); +#endif + gd->ram_size = dram_present; + + return dram_present; +} + + +#ifdef CONFIG_PCI + + +static struct { + u8 priority; + u16 level_reg; + u8 level_bit; +} sc520_irq[] = { + { SC520_IRQ0, SC520_MPICMODE, 0x01 }, + { SC520_IRQ1, SC520_MPICMODE, 0x02 }, + { SC520_IRQ2, SC520_SL1PICMODE, 0x02 }, + { SC520_IRQ3, SC520_MPICMODE, 0x08 }, + { SC520_IRQ4, SC520_MPICMODE, 0x10 }, + { SC520_IRQ5, SC520_MPICMODE, 0x20 }, + { SC520_IRQ6, SC520_MPICMODE, 0x40 }, + { SC520_IRQ7, SC520_MPICMODE, 0x80 }, + + { SC520_IRQ8, SC520_SL1PICMODE, 0x01 }, + { SC520_IRQ9, SC520_SL1PICMODE, 0x02 }, + { SC520_IRQ10, SC520_SL1PICMODE, 0x04 }, + { SC520_IRQ11, SC520_SL1PICMODE, 0x08 }, + { SC520_IRQ12, SC520_SL1PICMODE, 0x10 }, + { SC520_IRQ13, SC520_SL1PICMODE, 0x20 }, + { SC520_IRQ14, SC520_SL1PICMODE, 0x40 }, + { SC520_IRQ15, SC520_SL1PICMODE, 0x80 } +}; + + +/* The interrupt used for PCI INTA-INTD */ +int sc520_pci_ints[15] = { + -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1 +}; + +/* utility function to configure a pci interrupt */ +int pci_sc520_set_irq(int pci_pin, int irq) +{ + int i; + +# if 1 + printf("set_irq(): map INT%c to IRQ%d\n", pci_pin + 'A', irq); +#endif + if (irq < 0 || irq > 15) { + return -1; /* illegal irq */ + } + + if (pci_pin < 0 || pci_pin > 15) { + return -1; /* illegal pci int pin */ + } + + /* first disable any non-pci interrupt source that use + * this level */ + for (i=SC520_GPTMR0MAP;i<=SC520_GP10IMAP;i++) { + if (i>=SC520_PCIINTAMAP&&i<=SC520_PCIINTDMAP) { + continue; + } + if (read_mmcr_byte(i) == sc520_irq[irq].priority) { + write_mmcr_byte(i, SC520_IRQ_DISABLED); + } + } + + /* Set the trigger to level */ + write_mmcr_byte(sc520_irq[irq].level_reg, + read_mmcr_byte(sc520_irq[irq].level_reg) | sc520_irq[irq].level_bit); + + + if (pci_pin < 4) { + /* PCI INTA-INTD */ + /* route the interrupt */ + write_mmcr_byte(SC520_PCIINTAMAP + pci_pin, sc520_irq[irq].priority); + + + } else { + /* GPIRQ0-GPIRQ10 used for additional PCI INTS */ + write_mmcr_byte(SC520_GP0IMAP + pci_pin - 4, sc520_irq[irq].priority); + + /* also set the polarity in this case */ + write_mmcr_word(SC520_INTPINPOL, + read_mmcr_word(SC520_INTPINPOL) | (1 << (pci_pin-4))); + + } + + /* register the pin */ + sc520_pci_ints[pci_pin] = irq; + + + return 0; /* OK */ +} + +void pci_sc520_init(struct pci_controller *hose) +{ + hose->first_busno = 0; + hose->last_busno = 0xff; + + /* System memory space */ + pci_set_region(hose->regions + 0, + SC520_PCI_MEMORY_BUS, + SC520_PCI_MEMORY_PHYS, + SC520_PCI_MEMORY_SIZE, + PCI_REGION_MEM | PCI_REGION_SYS_MEMORY); + + /* PCI memory space */ + pci_set_region(hose->regions + 1, + SC520_PCI_MEM_BUS, + SC520_PCI_MEM_PHYS, + SC520_PCI_MEM_SIZE, + PCI_REGION_MEM); + + /* ISA/PCI memory space */ + pci_set_region(hose->regions + 2, + SC520_ISA_MEM_BUS, + SC520_ISA_MEM_PHYS, + SC520_ISA_MEM_SIZE, + PCI_REGION_MEM); + + /* PCI I/O space */ + pci_set_region(hose->regions + 3, + SC520_PCI_IO_BUS, + SC520_PCI_IO_PHYS, + SC520_PCI_IO_SIZE, + PCI_REGION_IO); + + /* ISA/PCI I/O space */ + pci_set_region(hose->regions + 4, + SC520_ISA_IO_BUS, + SC520_ISA_IO_PHYS, + SC520_ISA_IO_SIZE, + PCI_REGION_IO); + + hose->region_count = 5; + + pci_setup_type1(hose, + SC520_REG_ADDR, + SC520_REG_DATA); + + pci_register_hose(hose); + + hose->last_busno = pci_hose_scan(hose); + + /* enable target memory acceses on host brige */ + pci_write_config_word(0, PCI_COMMAND, + PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); + +} + + +#endif + +#ifdef CONFIG_SYS_TIMER_SC520 + + +void reset_timer(void) +{ + write_mmcr_word(SC520_GPTMR0CNT, 0); + write_mmcr_word(SC520_GPTMR0CTL, 0x6001); + +} + +ulong get_timer(ulong base) +{ + /* fixme: 30 or 33 */ + return read_mmcr_word(SC520_GPTMR0CNT) / 33; +} + +void set_timer(ulong t) +{ + /* FixMe: use two cascade coupled timers */ + write_mmcr_word(SC520_GPTMR0CTL, 0x4001); + write_mmcr_word(SC520_GPTMR0CNT, t*33); + write_mmcr_word(SC520_GPTMR0CTL, 0x6001); +} + + +void udelay(unsigned long usec) +{ + int m=0; + long u; + + read_mmcr_word(SC520_SWTMRMILLI); + read_mmcr_word(SC520_SWTMRMICRO); + +#if 0 + /* do not enable this line, udelay is used in the serial driver -> recursion */ + printf("udelay: %ld m.u %d.%d tm.tu %d.%d\n", usec, m, u, tm, tu); +#endif + while (1) { + + m += read_mmcr_word(SC520_SWTMRMILLI); + u = read_mmcr_word(SC520_SWTMRMICRO) + (m * 1000); + + if (usec <= u) { + break; + } + } +} + +#endif + +int ssi_set_interface(int freq, int lsb_first, int inv_clock, int inv_phase) +{ + u8 temp=0; + + if (freq >= 8192) { + temp |= CTL_CLK_SEL_4; + } else if (freq >= 4096) { + temp |= CTL_CLK_SEL_8; + } else if (freq >= 2048) { + temp |= CTL_CLK_SEL_16; + } else if (freq >= 1024) { + temp |= CTL_CLK_SEL_32; + } else if (freq >= 512) { + temp |= CTL_CLK_SEL_64; + } else if (freq >= 256) { + temp |= CTL_CLK_SEL_128; + } else if (freq >= 128) { + temp |= CTL_CLK_SEL_256; + } else { + temp |= CTL_CLK_SEL_512; + } + + if (!lsb_first) { + temp |= MSBF_ENB; + } + + if (inv_clock) { + temp |= CLK_INV_ENB; + } + + if (inv_phase) { + temp |= PHS_INV_ENB; + } + + write_mmcr_byte(SC520_SSICTL, temp); + + return 0; +} + +u8 ssi_txrx_byte(u8 data) +{ + write_mmcr_byte(SC520_SSIXMIT, data); + while ((read_mmcr_byte(SC520_SSISTA)) & SSISTA_BSY); + write_mmcr_byte(SC520_SSICMD, SSICMD_CMD_SEL_XMITRCV); + while ((read_mmcr_byte(SC520_SSISTA)) & SSISTA_BSY); + return read_mmcr_byte(SC520_SSIRCV); +} + + +void ssi_tx_byte(u8 data) +{ + write_mmcr_byte(SC520_SSIXMIT, data); + while ((read_mmcr_byte(SC520_SSISTA)) & SSISTA_BSY); + write_mmcr_byte(SC520_SSICMD, SSICMD_CMD_SEL_XMIT); +} + +u8 ssi_rx_byte(void) +{ + while ((read_mmcr_byte(SC520_SSISTA)) & SSISTA_BSY); + write_mmcr_byte(SC520_SSICMD, SSICMD_CMD_SEL_RCV); + while ((read_mmcr_byte(SC520_SSISTA)) & SSISTA_BSY); + return read_mmcr_byte(SC520_SSIRCV); +} + +#ifdef CONFIG_SYS_RESET_SC520 +void reset_cpu(ulong addr) +{ + printf("Resetting using SC520 MMCR\n"); + /* Write a '1' to the SYS_RST of the RESCFG MMCR */ + write_mmcr_word(SC520_RESCFG, 0x0001); + + /* NOTREACHED */ +} +#endif diff --git a/cpu/i386/sc520/sc520_asm.S b/cpu/i386/sc520/sc520_asm.S new file mode 100644 index 000000000..2042d9bfc --- /dev/null +++ b/cpu/i386/sc520/sc520_asm.S @@ -0,0 +1,581 @@ +/* + * (C) Copyright 2002 + * Daniel Engström, Omicron Ceti AB . + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* This file is largely based on code obtned from AMD. AMD's original + * copyright is included below + */ + +/* + * ============================================================================= + * + * Copyright 1999 Advanced Micro Devices, Inc. + * + * This software is the property of Advanced Micro Devices, Inc (AMD) which + * specifically grants the user the right to modify, use and distribute this + * software provided this COPYRIGHT NOTICE is not removed or altered. All + * other rights are reserved by AMD. + * + * THE MATERIALS ARE PROVIDED "AS IS" WITHOUT ANY EXPRESS OR IMPLIED WARRANTY + * OF ANY KIND INCLUDING WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT OF + * THIRD-PARTY INTELLECTUAL PROPERTY, OR FITNESS FOR ANY PARTICULAR PURPOSE. + * IN NO EVENT SHALL AMD OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER + * (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS + * INTERRUPTION, LOSS OF INFORMAITON) ARISING OUT OF THE USE OF OR INABILITY + * TO USE THE MATERIALS, EVEN IF AMD HAS BEEN ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGES. BECAUSE SOME JURSIDICTIONS PROHIBIT THE EXCLUSION OR + * LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE + * LIMITATION MAY NOT APPLY TO YOU. + * + * AMD does not assume any responsibility for any errors that may appear in + * the Materials nor any responsibility to support or update the Materials. + * AMD retains the right to make changes to its test specifications at any + * time, without notice. + * + * So that all may benefit from your experience, please report any problems + * or suggestions about this software back to AMD. Please include your name, + * company, telephone number, AMD product requiring support and question or + * problem encountered. + * + * Advanced Micro Devices, Inc. Worldwide support and contact + * Embedded Processor Division information available at: + * Systems Engineering epd.support@amd.com + * 5204 E. Ben White Blvd. -or- + * Austin, TX 78741 http://www.amd.com/html/support/techsup.html + * ============================================================================ + */ + + +/******************************************************************************* + * AUTHOR : Buddy Fey - Original. + ******************************************************************************* + */ + + +/******************************************************************************* + * FUNCTIONAL DESCRIPTION: + * This routine is called to autodetect the geometry of the DRAM. + * + * This routine is called to determine the number of column bits for the DRAM + * devices in this external bank. This routine assumes that the external bank + * has been configured for an 11-bit column and for 4 internal banks. This gives + * us the maximum address reach in memory. By writing a test value to the max + * address and locating where it aliases to, we can determine the number of valid + * column bits. + * + * This routine is called to determine the number of internal banks each DRAM + * device has. The external bank (under test) is configured for maximum reach + * with 11-bit columns and 4 internal banks. This routine will write to a max + * address (BA1 and BA0 = 1) and then read from an address with BA1=0 to see if + * that column is a "don't care". If BA1 does not affect write/read of data, + * then this device has only 2 internal banks. + * + * This routine is called to determine the ending address for this external + * bank of SDRAM. We write to a max address with a data value and then disable + * row address bits looking for "don't care" locations. Each "don't care" bit + * represents a dividing of the maximum density (128M) by 2. By dividing the + * maximum of 32 4M chunks in an external bank down by all the "don't care" bits + * determined during sizing, we set the proper density. + * + * WARNINGS. + * bp must be preserved because it is used for return linkage. + * + * EXIT + * nothing returned - but the memory subsystem is enabled + ******************************************************************************* + */ + +#include + +.section .text +.equ DRCCTL, 0x0fffef010 /* DRAM control register */ +.equ DRCTMCTL, 0x0fffef012 /* DRAM timing control register */ +.equ DRCCFG, 0x0fffef014 /* DRAM bank configuration register */ +.equ DRCBENDADR, 0x0fffef018 /* DRAM bank ending address register */ +.equ ECCCTL, 0x0fffef020 /* DRAM ECC control register */ +.equ ECCINT, 0x0fffefd18 /* DRAM ECC nmi-INT mapping */ +.equ DBCTL, 0x0fffef040 /* DRAM buffer control register */ + +.equ CACHELINESZ, 0x00000010 /* size of our cache line (read buffer) */ +.equ COL11_ADR, 0x0e001e00 /* 11 col addrs */ +.equ COL10_ADR, 0x0e000e00 /* 10 col addrs */ +.equ COL09_ADR, 0x0e000600 /* 9 col addrs */ +.equ COL08_ADR, 0x0e000200 /* 8 col addrs */ +.equ ROW14_ADR, 0x0f000000 /* 14 row addrs */ +.equ ROW13_ADR, 0x07000000 /* 13 row addrs */ +.equ ROW12_ADR, 0x03000000 /* 12 row addrs */ +.equ ROW11_ADR, 0x01000000 /* 11 row addrs/also bank switch */ +.equ ROW10_ADR, 0x00000000 /* 10 row addrs/also bank switch */ +.equ COL11_DATA, 0x0b0b0b0b /* 11 col addrs */ +.equ COL10_DATA, 0x0a0a0a0a /* 10 col data */ +.equ COL09_DATA, 0x09090909 /* 9 col data */ +.equ COL08_DATA, 0x08080808 /* 8 col data */ +.equ ROW14_DATA, 0x3f3f3f3f /* 14 row data (MASK) */ +.equ ROW13_DATA, 0x1f1f1f1f /* 13 row data (MASK) */ +.equ ROW12_DATA, 0x0f0f0f0f /* 12 row data (MASK) */ +.equ ROW11_DATA, 0x07070707 /* 11 row data/also bank switch (MASK) */ +.equ ROW10_DATA, 0xaaaaaaaa /* 10 row data/also bank switch (MASK) */ + + + /* + * initialize dram controller registers + */ +.globl mem_init +mem_init: + xorw %ax,%ax + movl $DBCTL, %edi + movb %al, (%edi) /* disable write buffer */ + + movl $ECCCTL, %edi + movb %al, (%edi) /* disable ECC */ + + movl $DRCTMCTL, %edi + movb $0x1E,%al /* Set SDRAM timing for slowest */ + movb %al, (%edi) + + /* + * setup loop to do 4 external banks starting with bank 3 + */ + movl $0xff000000,%eax /* enable last bank and setup */ + movl $DRCBENDADR, %edi /* ending address register */ + movl %eax, (%edi) + + movl $DRCCFG, %edi /* setup */ + movw $0xbbbb,%ax /* dram config register for */ + movw %ax, (%edi) + + /* + * issue a NOP to all DRAMs + */ + movl $DRCCTL, %edi /* setup DRAM control register with */ + movb $0x1,%al /* Disable refresh,disable write buffer */ + movb %al, (%edi) + movl $CACHELINESZ, %esi /* just a dummy address to write for */ + movw %ax, (%esi) + /* + * delay for 100 usec? 200? + * ******this is a cludge for now ************* + */ + movw $100,%cx +sizdelay: + loop sizdelay /* we need 100 usec here */ + /***********************************************/ + + /* + * issue all banks precharge + */ + movb $0x2,%al /* All banks precharge */ + movb %al, (%edi) + movw %ax, (%esi) + + /* + * issue 2 auto refreshes to all banks + */ + movb $0x4,%al /* Auto refresh cmd */ + movb %al, (%edi) + movw $2,%cx +refresh1: + movw %ax, (%esi) + loop refresh1 + + /* + * issue LOAD MODE REGISTER command + */ + movb $0x3,%al /* Load mode register cmd */ + movb %al, (%edi) + movw %ax, (%esi) + + /* + * issue 8 more auto refreshes to all banks + */ + movb $0x4,%al /* Auto refresh cmd */ + movb %al, (%edi) + movw $8,%cx +refresh2: + movw %ax, (%esi) + loop refresh2 + + /* + * set control register to NORMAL mode + */ + movb $0x0,%al /* Normal mode value */ + movb %al, (%edi) + + /* + * size dram starting with external bank 3 moving to external bank 0 + */ + movl $0x3,%ecx /* start with external bank 3 */ + +nextbank: + + /* + * write col 11 wrap adr + */ + movl $COL11_ADR, %esi /* set address to max col (11) wrap addr */ + movl $COL11_DATA, %eax /* pattern for max supported columns(11) */ + movl %eax, (%esi) /* write max col pattern at max col adr */ + movl (%esi), %ebx /* optional read */ + cmpl %ebx,%eax /* to verify write */ + jnz bad_ram /* this ram is bad */ + /* + * write col 10 wrap adr + */ + + movl $COL10_ADR, %esi /* set address to 10 col wrap address */ + movl $COL10_DATA, %eax /* pattern for 10 col wrap */ + movl %eax, (%esi) /* write 10 col pattern @ 10 col wrap adr */ + movl (%esi), %ebx /* optional read */ + cmpl %ebx,%eax /* to verify write */ + jnz bad_ram /* this ram is bad */ + /* + * write col 9 wrap adr + */ + movl $COL09_ADR, %esi /* set address to 9 col wrap address */ + movl $COL09_DATA, %eax /* pattern for 9 col wrap */ + movl %eax, (%esi) /* write 9 col pattern @ 9 col wrap adr */ + movl (%esi), %ebx /* optional read */ + cmpl %ebx,%eax /* to verify write */ + jnz bad_ram /* this ram is bad */ + /* + * write col 8 wrap adr + */ + movl $COL08_ADR, %esi /* set address to min(8) col wrap address */ + movl $COL08_DATA, %eax /* pattern for min (8) col wrap */ + movl %eax, (%esi) /* write min col pattern @ min col adr */ + movl (%esi), %ebx /* optional read */ + cmpl %ebx,%eax /* to verify write */ + jnz bad_ram /* this ram is bad */ + /* + * write row 14 wrap adr + */ + movl $ROW14_ADR, %esi /* set address to max row (14) wrap addr */ + movl $ROW14_DATA, %eax /* pattern for max supported rows(14) */ + movl %eax, (%esi) /* write max row pattern at max row adr */ + movl (%esi), %ebx /* optional read */ + cmpl %ebx,%eax /* to verify write */ + jnz bad_ram /* this ram is bad */ + /* + * write row 13 wrap adr + */ + movl $ROW13_ADR, %esi /* set address to 13 row wrap address */ + movl $ROW13_DATA, %eax /* pattern for 13 row wrap */ + movl %eax, (%esi) /* write 13 row pattern @ 13 row wrap adr */ + movl (%esi), %ebx /* optional read */ + cmpl %ebx,%eax /* to verify write */ + jnz bad_ram /* this ram is bad */ + /* + * write row 12 wrap adr + */ + movl $ROW12_ADR, %esi /* set address to 12 row wrap address */ + movl $ROW12_DATA, %eax /* pattern for 12 row wrap */ + movl %eax, (%esi) /* write 12 row pattern @ 12 row wrap adr */ + movl (%esi), %ebx /* optional read */ + cmpl %ebx,%eax /* to verify write */ + jnz bad_ram /* this ram is bad */ + /* + * write row 11 wrap adr + */ + movl $ROW11_ADR, %edi /* set address to 11 row wrap address */ + movl $ROW11_DATA, %eax /* pattern for 11 row wrap */ + movl %eax, (%edi) /* write 11 row pattern @ 11 row wrap adr */ + movl (%edi), %ebx /* optional read */ + cmpl %ebx,%eax /* to verify write */ + jnz bad_ram /* this ram is bad */ + /* + * write row 10 wrap adr --- this write is really to determine number of banks + */ + movl $ROW10_ADR, %edi /* set address to 10 row wrap address */ + movl $ROW10_DATA, %eax /* pattern for 10 row wrap (AA) */ + movl %eax, (%edi) /* write 10 row pattern @ 10 row wrap adr */ + movl (%edi), %ebx /* optional read */ + cmpl %ebx,%eax /* to verify write */ + jnz bad_ram /* this ram is bad */ + /* + * read data @ row 12 wrap adr to determine * banks, + * and read data @ row 14 wrap adr to determine * rows. + * if data @ row 12 wrap adr is not AA, 11 or 12 we have bad RAM. + * if data @ row 12 wrap == AA, we only have 2 banks, NOT 4 + * if data @ row 12 wrap == 11 or 12, we have 4 banks, + */ + xorw %di,%di /* value for 2 banks in DI */ + movl (%esi), %ebx /* read from 12 row wrap to check banks + * (esi is setup from the write to row 12 wrap) */ + cmpl %ebx,%eax /* check for AA pattern (eax holds the aa pattern) */ + jz only2 /* if pattern == AA, we only have 2 banks */ + + /* 4 banks */ + + movw $8,%di /* value for 4 banks in DI (BNK_CNT bit) */ + cmpl $ROW11_DATA, %ebx /* only other legitimate values are 11 */ + jz only2 + cmpl $ROW12_DATA, %ebx /* and 12 */ + jnz bad_ram /* its bad if not 11 or 12! */ + + /* fall through */ +only2: + /* + * validate row mask + */ + movl $ROW14_ADR, %esi /* set address back to max row wrap addr */ + movl (%esi), %eax /* read actual number of rows @ row14 adr */ + + cmpl $ROW11_DATA, %eax /* row must be greater than 11 pattern */ + jb bad_ram + + cmpl $ROW14_DATA, %eax /* and row must be less than 14 pattern */ + ja bad_ram + + cmpb %ah,%al /* verify all 4 bytes of dword same */ + jnz bad_ram + movl %eax,%ebx + shrl $16,%ebx + cmpw %bx,%ax + jnz bad_ram + /* + * read col 11 wrap adr for real column data value + */ + movl $COL11_ADR, %esi /* set address to max col (11) wrap addr */ + movl (%esi), %eax /* read real col number at max col adr */ + /* + * validate column data + */ + cmpl $COL08_DATA, %eax /* col must be greater than 8 pattern */ + jb bad_ram + + cmpl $COL11_DATA, %eax /* and row must be less than 11 pattern */ + ja bad_ram + + subl $COL08_DATA, %eax /* normalize column data to zero */ + jc bad_ram + cmpb %ah,%al /* verify all 4 bytes of dword equal */ + jnz bad_ram + movl %eax,%edx + shrl $16,%edx + cmpw %dx,%ax + jnz bad_ram + /* + * merge bank and col data together + */ + addw %di,%dx /* merge of bank and col info in dl */ + /* + * fix ending addr mask based upon col info + */ + movb $3,%al + subb %dh,%al /* dh contains the overflow from the bank/col merge */ + movb %bl,%dh /* bl contains the row mask (aa, 07, 0f, 1f or 3f) */ + xchgw %cx,%ax /* cx = ax = 3 or 2 depending on 2 or 4 bank device */ + shrb %cl,%dh /* */ + incb %dh /* ending addr is 1 greater than real end */ + xchgw %cx,%ax /* cx is bank number again */ + /* + * issue all banks precharge + */ +bad_reint: + movl $DRCCTL, %esi /* setup DRAM control register with */ + movb $0x2,%al /* All banks precharge */ + movb %al, (%esi) + movl $CACHELINESZ, %esi /* address to init read buffer */ + movw %ax, (%esi) + + /* + * update ENDING ADDRESS REGISTER + */ + movl $DRCBENDADR, %edi /* DRAM ending address register */ + movl %ecx,%ebx + addl %ebx, %edi + movb %dh, (%edi) + /* + * update CONFIG REGISTER + */ + xorb %dh,%dh + movw $0x00f,%bx + movw %cx,%ax + shlw $2,%ax + xchgw %cx,%ax + shlw %cl,%dx + shlw %cl,%bx + notw %bx + xchgw %cx,%ax + movl $DRCCFG, %edi + mov (%edi), %ax + andw %bx,%ax + orw %dx,%ax + movw %ax, (%edi) + jcxz cleanup + + decw %cx + movl %ecx,%ebx + movl $DRCBENDADR, %edi /* DRAM ending address register */ + movb $0xff,%al + addl %ebx, %edi + movb %al, (%edi) + /* + * set control register to NORMAL mode + */ + movl $DRCCTL, %esi /* setup DRAM control register with */ + movb $0x0,%al /* Normal mode value */ + movb %al, (%esi) + movl $CACHELINESZ, %esi /* address to init read buffer */ + movw %ax, (%esi) + jmp nextbank + +cleanup: + movl $DRCBENDADR, %edi /* DRAM ending address register */ + movw $4,%cx + xorw %ax,%ax +cleanuplp: + movb (%edi), %al + orb %al,%al + jz emptybank + + addb %ah,%al + jns nottoomuch + + movb $0x7f,%al +nottoomuch: + movb %al,%ah + orb $0x80,%al + movb %al, (%edi) +emptybank: + incl %edi + loop cleanuplp + +#if defined CONFIG_SYS_SDRAM_DRCTMCTL + /* just have your hardware desinger _GIVE_ you what you need here! */ + movl $DRCTMCTL, %edi + movb $CONFIG_SYS_SDRAM_DRCTMCTL,%al + movb (%edi), %al +#else +#if defined(CONFIG_SYS_SDRAM_CAS_LATENCY_2T) || defined(CONFIG_SYS_SDRAM_CAS_LATENCY_3T) + /* set the CAS latency now since it is hard to do + * when we run from the RAM */ + movl $DRCTMCTL, %edi /* DRAM timing register */ + movb (%edi), %al +#ifdef CONFIG_SYS_SDRAM_CAS_LATENCY_2T + andb $0xef, %al +#endif +#ifdef CONFIG_SYS_SDRAM_CAS_LATENCY_3T + orb $0x10, %al +#endif + movb %al, (%edi) +#endif +#endif + movl $DRCCTL, %edi /* DRAM Control register */ + movb $0x3,%al /* Load mode register cmd */ + movb %al, (%edi) + movw %ax, (%esi) + + + movl $DRCCTL, %edi /* DRAM Control register */ + movb $0x18,%al /* Enable refresh and NORMAL mode */ + movb %al, (%edi) + + jmp dram_done + +bad_ram: + xorl %edx,%edx + xorl %edi,%edi + jmp bad_reint + +dram_done: + + /* readback DRCBENDADR and return the number + * of available ram bytes in %eax */ + + movl $DRCBENDADR, %edi /* DRAM ending address register */ + + movl (%edi), %eax + movl %eax, %ecx + andl $0x80000000, %ecx + jz bank2 + andl $0x7f000000, %eax + shrl $2, %eax + movl %eax, %ebx + +bank2: movl (%edi), %eax + movl %eax, %ecx + andl $0x00800000, %ecx + jz bank1 + andl $0x007f0000, %eax + shll $6, %eax + movl %eax, %ebx + +bank1: movl (%edi), %eax + movl %eax, %ecx + andl $0x00008000, %ecx + jz bank0 + andl $0x00007f00, %eax + shll $14, %eax + movl %eax, %ebx + +bank0: movl (%edi), %eax + movl %eax, %ecx + andl $0x00000080, %ecx + jz done + andl $0x0000007f, %eax + shll $22, %eax + movl %eax, %ebx + + +done: + movl %ebx, %eax + +#if CONFIG_SYS_SDRAM_ECC_ENABLE + /* A nominal memory test: just a byte at each address line */ + movl %eax, %ecx + shrl $0x1, %ecx + movl $0x1, %edi +memtest0: + movb $0xa5, (%edi) + cmpb $0xa5, (%edi) + jne out + shrl $1, %ecx + andl %ecx,%ecx + jz set_ecc + shll $1, %edi + jmp memtest0 + +set_ecc: + /* clear all ram with a memset */ + movl %eax, %ecx + xorl %esi, %esi + xorl %edi, %edi + xorl %eax, %eax + shrl $2, %ecx + cld + rep stosl + /* enable read, write buffers */ + movb $0x11, %al + movl $DBCTL, %edi + movb %al, (%edi) + /* enable NMI mapping for ECC */ + movl $ECCINT, %edi + mov $0x10, %al + movb %al, (%edi) + /* Turn on ECC */ + movl $ECCCTL, %edi + mov $0x05, %al + movb %al, (%edi) +#endif +out: + movl %ebx, %eax + jmp *%ebp diff --git a/cpu/i386/sc520_asm.S b/cpu/i386/sc520_asm.S deleted file mode 100644 index 59ed2b8d6..000000000 --- a/cpu/i386/sc520_asm.S +++ /dev/null @@ -1,584 +0,0 @@ -/* - * (C) Copyright 2002 - * Daniel Engström, Omicron Ceti AB . - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* This file is largely based on code obtned from AMD. AMD's original - * copyright is included below - */ - -/* - * ============================================================================= - * - * Copyright 1999 Advanced Micro Devices, Inc. - * - * This software is the property of Advanced Micro Devices, Inc (AMD) which - * specifically grants the user the right to modify, use and distribute this - * software provided this COPYRIGHT NOTICE is not removed or altered. All - * other rights are reserved by AMD. - * - * THE MATERIALS ARE PROVIDED "AS IS" WITHOUT ANY EXPRESS OR IMPLIED WARRANTY - * OF ANY KIND INCLUDING WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT OF - * THIRD-PARTY INTELLECTUAL PROPERTY, OR FITNESS FOR ANY PARTICULAR PURPOSE. - * IN NO EVENT SHALL AMD OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER - * (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS - * INTERRUPTION, LOSS OF INFORMAITON) ARISING OUT OF THE USE OF OR INABILITY - * TO USE THE MATERIALS, EVEN IF AMD HAS BEEN ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGES. BECAUSE SOME JURSIDICTIONS PROHIBIT THE EXCLUSION OR - * LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE - * LIMITATION MAY NOT APPLY TO YOU. - * - * AMD does not assume any responsibility for any errors that may appear in - * the Materials nor any responsibility to support or update the Materials. - * AMD retains the right to make changes to its test specifications at any - * time, without notice. - * - * So that all may benefit from your experience, please report any problems - * or suggestions about this software back to AMD. Please include your name, - * company, telephone number, AMD product requiring support and question or - * problem encountered. - * - * Advanced Micro Devices, Inc. Worldwide support and contact - * Embedded Processor Division information available at: - * Systems Engineering epd.support@amd.com - * 5204 E. Ben White Blvd. -or- - * Austin, TX 78741 http://www.amd.com/html/support/techsup.html - * ============================================================================ - */ - - -/******************************************************************************* - * AUTHOR : Buddy Fey - Original. - ******************************************************************************* - */ - - -/******************************************************************************* - * FUNCTIONAL DESCRIPTION: - * This routine is called to autodetect the geometry of the DRAM. - * - * This routine is called to determine the number of column bits for the DRAM - * devices in this external bank. This routine assumes that the external bank - * has been configured for an 11-bit column and for 4 internal banks. This gives - * us the maximum address reach in memory. By writing a test value to the max - * address and locating where it aliases to, we can determine the number of valid - * column bits. - * - * This routine is called to determine the number of internal banks each DRAM - * device has. The external bank (under test) is configured for maximum reach - * with 11-bit columns and 4 internal banks. This routine will write to a max - * address (BA1 and BA0 = 1) and then read from an address with BA1=0 to see if - * that column is a "don't care". If BA1 does not affect write/read of data, - * then this device has only 2 internal banks. - * - * This routine is called to determine the ending address for this external - * bank of SDRAM. We write to a max address with a data value and then disable - * row address bits looking for "don't care" locations. Each "don't care" bit - * represents a dividing of the maximum density (128M) by 2. By dividing the - * maximum of 32 4M chunks in an external bank down by all the "don't care" bits - * determined during sizing, we set the proper density. - * - * WARNINGS. - * bp must be preserved because it is used for return linkage. - * - * EXIT - * nothing returned - but the memory subsystem is enabled - ******************************************************************************* - */ - -#include -#ifdef CONFIG_SC520 - -.section .text -.equ DRCCTL, 0x0fffef010 /* DRAM control register */ -.equ DRCTMCTL, 0x0fffef012 /* DRAM timing control register */ -.equ DRCCFG, 0x0fffef014 /* DRAM bank configuration register */ -.equ DRCBENDADR, 0x0fffef018 /* DRAM bank ending address register */ -.equ ECCCTL, 0x0fffef020 /* DRAM ECC control register */ -.equ ECCINT, 0x0fffefd18 /* DRAM ECC nmi-INT mapping */ -.equ DBCTL, 0x0fffef040 /* DRAM buffer control register */ - -.equ CACHELINESZ, 0x00000010 /* size of our cache line (read buffer) */ -.equ COL11_ADR, 0x0e001e00 /* 11 col addrs */ -.equ COL10_ADR, 0x0e000e00 /* 10 col addrs */ -.equ COL09_ADR, 0x0e000600 /* 9 col addrs */ -.equ COL08_ADR, 0x0e000200 /* 8 col addrs */ -.equ ROW14_ADR, 0x0f000000 /* 14 row addrs */ -.equ ROW13_ADR, 0x07000000 /* 13 row addrs */ -.equ ROW12_ADR, 0x03000000 /* 12 row addrs */ -.equ ROW11_ADR, 0x01000000 /* 11 row addrs/also bank switch */ -.equ ROW10_ADR, 0x00000000 /* 10 row addrs/also bank switch */ -.equ COL11_DATA, 0x0b0b0b0b /* 11 col addrs */ -.equ COL10_DATA, 0x0a0a0a0a /* 10 col data */ -.equ COL09_DATA, 0x09090909 /* 9 col data */ -.equ COL08_DATA, 0x08080808 /* 8 col data */ -.equ ROW14_DATA, 0x3f3f3f3f /* 14 row data (MASK) */ -.equ ROW13_DATA, 0x1f1f1f1f /* 13 row data (MASK) */ -.equ ROW12_DATA, 0x0f0f0f0f /* 12 row data (MASK) */ -.equ ROW11_DATA, 0x07070707 /* 11 row data/also bank switch (MASK) */ -.equ ROW10_DATA, 0xaaaaaaaa /* 10 row data/also bank switch (MASK) */ - - - /* - * initialize dram controller registers - */ -.globl mem_init -mem_init: - xorw %ax,%ax - movl $DBCTL, %edi - movb %al, (%edi) /* disable write buffer */ - - movl $ECCCTL, %edi - movb %al, (%edi) /* disable ECC */ - - movl $DRCTMCTL, %edi - movb $0x1E,%al /* Set SDRAM timing for slowest */ - movb %al, (%edi) - - /* - * setup loop to do 4 external banks starting with bank 3 - */ - movl $0xff000000,%eax /* enable last bank and setup */ - movl $DRCBENDADR, %edi /* ending address register */ - movl %eax, (%edi) - - movl $DRCCFG, %edi /* setup */ - movw $0xbbbb,%ax /* dram config register for */ - movw %ax, (%edi) - - /* - * issue a NOP to all DRAMs - */ - movl $DRCCTL, %edi /* setup DRAM control register with */ - movb $0x1,%al /* Disable refresh,disable write buffer */ - movb %al, (%edi) - movl $CACHELINESZ, %esi /* just a dummy address to write for */ - movw %ax, (%esi) - /* - * delay for 100 usec? 200? - * ******this is a cludge for now ************* - */ - movw $100,%cx -sizdelay: - loop sizdelay /* we need 100 usec here */ - /***********************************************/ - - /* - * issue all banks precharge - */ - movb $0x2,%al /* All banks precharge */ - movb %al, (%edi) - movw %ax, (%esi) - - /* - * issue 2 auto refreshes to all banks - */ - movb $0x4,%al /* Auto refresh cmd */ - movb %al, (%edi) - movw $2,%cx -refresh1: - movw %ax, (%esi) - loop refresh1 - - /* - * issue LOAD MODE REGISTER command - */ - movb $0x3,%al /* Load mode register cmd */ - movb %al, (%edi) - movw %ax, (%esi) - - /* - * issue 8 more auto refreshes to all banks - */ - movb $0x4,%al /* Auto refresh cmd */ - movb %al, (%edi) - movw $8,%cx -refresh2: - movw %ax, (%esi) - loop refresh2 - - /* - * set control register to NORMAL mode - */ - movb $0x0,%al /* Normal mode value */ - movb %al, (%edi) - - /* - * size dram starting with external bank 3 moving to external bank 0 - */ - movl $0x3,%ecx /* start with external bank 3 */ - -nextbank: - - /* - * write col 11 wrap adr - */ - movl $COL11_ADR, %esi /* set address to max col (11) wrap addr */ - movl $COL11_DATA, %eax /* pattern for max supported columns(11) */ - movl %eax, (%esi) /* write max col pattern at max col adr */ - movl (%esi), %ebx /* optional read */ - cmpl %ebx,%eax /* to verify write */ - jnz bad_ram /* this ram is bad */ - /* - * write col 10 wrap adr - */ - - movl $COL10_ADR, %esi /* set address to 10 col wrap address */ - movl $COL10_DATA, %eax /* pattern for 10 col wrap */ - movl %eax, (%esi) /* write 10 col pattern @ 10 col wrap adr */ - movl (%esi), %ebx /* optional read */ - cmpl %ebx,%eax /* to verify write */ - jnz bad_ram /* this ram is bad */ - /* - * write col 9 wrap adr - */ - movl $COL09_ADR, %esi /* set address to 9 col wrap address */ - movl $COL09_DATA, %eax /* pattern for 9 col wrap */ - movl %eax, (%esi) /* write 9 col pattern @ 9 col wrap adr */ - movl (%esi), %ebx /* optional read */ - cmpl %ebx,%eax /* to verify write */ - jnz bad_ram /* this ram is bad */ - /* - * write col 8 wrap adr - */ - movl $COL08_ADR, %esi /* set address to min(8) col wrap address */ - movl $COL08_DATA, %eax /* pattern for min (8) col wrap */ - movl %eax, (%esi) /* write min col pattern @ min col adr */ - movl (%esi), %ebx /* optional read */ - cmpl %ebx,%eax /* to verify write */ - jnz bad_ram /* this ram is bad */ - /* - * write row 14 wrap adr - */ - movl $ROW14_ADR, %esi /* set address to max row (14) wrap addr */ - movl $ROW14_DATA, %eax /* pattern for max supported rows(14) */ - movl %eax, (%esi) /* write max row pattern at max row adr */ - movl (%esi), %ebx /* optional read */ - cmpl %ebx,%eax /* to verify write */ - jnz bad_ram /* this ram is bad */ - /* - * write row 13 wrap adr - */ - movl $ROW13_ADR, %esi /* set address to 13 row wrap address */ - movl $ROW13_DATA, %eax /* pattern for 13 row wrap */ - movl %eax, (%esi) /* write 13 row pattern @ 13 row wrap adr */ - movl (%esi), %ebx /* optional read */ - cmpl %ebx,%eax /* to verify write */ - jnz bad_ram /* this ram is bad */ - /* - * write row 12 wrap adr - */ - movl $ROW12_ADR, %esi /* set address to 12 row wrap address */ - movl $ROW12_DATA, %eax /* pattern for 12 row wrap */ - movl %eax, (%esi) /* write 12 row pattern @ 12 row wrap adr */ - movl (%esi), %ebx /* optional read */ - cmpl %ebx,%eax /* to verify write */ - jnz bad_ram /* this ram is bad */ - /* - * write row 11 wrap adr - */ - movl $ROW11_ADR, %edi /* set address to 11 row wrap address */ - movl $ROW11_DATA, %eax /* pattern for 11 row wrap */ - movl %eax, (%edi) /* write 11 row pattern @ 11 row wrap adr */ - movl (%edi), %ebx /* optional read */ - cmpl %ebx,%eax /* to verify write */ - jnz bad_ram /* this ram is bad */ - /* - * write row 10 wrap adr --- this write is really to determine number of banks - */ - movl $ROW10_ADR, %edi /* set address to 10 row wrap address */ - movl $ROW10_DATA, %eax /* pattern for 10 row wrap (AA) */ - movl %eax, (%edi) /* write 10 row pattern @ 10 row wrap adr */ - movl (%edi), %ebx /* optional read */ - cmpl %ebx,%eax /* to verify write */ - jnz bad_ram /* this ram is bad */ - /* - * read data @ row 12 wrap adr to determine * banks, - * and read data @ row 14 wrap adr to determine * rows. - * if data @ row 12 wrap adr is not AA, 11 or 12 we have bad RAM. - * if data @ row 12 wrap == AA, we only have 2 banks, NOT 4 - * if data @ row 12 wrap == 11 or 12, we have 4 banks, - */ - xorw %di,%di /* value for 2 banks in DI */ - movl (%esi), %ebx /* read from 12 row wrap to check banks - * (esi is setup from the write to row 12 wrap) */ - cmpl %ebx,%eax /* check for AA pattern (eax holds the aa pattern) */ - jz only2 /* if pattern == AA, we only have 2 banks */ - - /* 4 banks */ - - movw $8,%di /* value for 4 banks in DI (BNK_CNT bit) */ - cmpl $ROW11_DATA, %ebx /* only other legitimate values are 11 */ - jz only2 - cmpl $ROW12_DATA, %ebx /* and 12 */ - jnz bad_ram /* its bad if not 11 or 12! */ - - /* fall through */ -only2: - /* - * validate row mask - */ - movl $ROW14_ADR, %esi /* set address back to max row wrap addr */ - movl (%esi), %eax /* read actual number of rows @ row14 adr */ - - cmpl $ROW11_DATA, %eax /* row must be greater than 11 pattern */ - jb bad_ram - - cmpl $ROW14_DATA, %eax /* and row must be less than 14 pattern */ - ja bad_ram - - cmpb %ah,%al /* verify all 4 bytes of dword same */ - jnz bad_ram - movl %eax,%ebx - shrl $16,%ebx - cmpw %bx,%ax - jnz bad_ram - /* - * read col 11 wrap adr for real column data value - */ - movl $COL11_ADR, %esi /* set address to max col (11) wrap addr */ - movl (%esi), %eax /* read real col number at max col adr */ - /* - * validate column data - */ - cmpl $COL08_DATA, %eax /* col must be greater than 8 pattern */ - jb bad_ram - - cmpl $COL11_DATA, %eax /* and row must be less than 11 pattern */ - ja bad_ram - - subl $COL08_DATA, %eax /* normalize column data to zero */ - jc bad_ram - cmpb %ah,%al /* verify all 4 bytes of dword equal */ - jnz bad_ram - movl %eax,%edx - shrl $16,%edx - cmpw %dx,%ax - jnz bad_ram - /* - * merge bank and col data together - */ - addw %di,%dx /* merge of bank and col info in dl */ - /* - * fix ending addr mask based upon col info - */ - movb $3,%al - subb %dh,%al /* dh contains the overflow from the bank/col merge */ - movb %bl,%dh /* bl contains the row mask (aa, 07, 0f, 1f or 3f) */ - xchgw %cx,%ax /* cx = ax = 3 or 2 depending on 2 or 4 bank device */ - shrb %cl,%dh /* */ - incb %dh /* ending addr is 1 greater than real end */ - xchgw %cx,%ax /* cx is bank number again */ - /* - * issue all banks precharge - */ -bad_reint: - movl $DRCCTL, %esi /* setup DRAM control register with */ - movb $0x2,%al /* All banks precharge */ - movb %al, (%esi) - movl $CACHELINESZ, %esi /* address to init read buffer */ - movw %ax, (%esi) - - /* - * update ENDING ADDRESS REGISTER - */ - movl $DRCBENDADR, %edi /* DRAM ending address register */ - movl %ecx,%ebx - addl %ebx, %edi - movb %dh, (%edi) - /* - * update CONFIG REGISTER - */ - xorb %dh,%dh - movw $0x00f,%bx - movw %cx,%ax - shlw $2,%ax - xchgw %cx,%ax - shlw %cl,%dx - shlw %cl,%bx - notw %bx - xchgw %cx,%ax - movl $DRCCFG, %edi - mov (%edi), %ax - andw %bx,%ax - orw %dx,%ax - movw %ax, (%edi) - jcxz cleanup - - decw %cx - movl %ecx,%ebx - movl $DRCBENDADR, %edi /* DRAM ending address register */ - movb $0xff,%al - addl %ebx, %edi - movb %al, (%edi) - /* - * set control register to NORMAL mode - */ - movl $DRCCTL, %esi /* setup DRAM control register with */ - movb $0x0,%al /* Normal mode value */ - movb %al, (%esi) - movl $CACHELINESZ, %esi /* address to init read buffer */ - movw %ax, (%esi) - jmp nextbank - -cleanup: - movl $DRCBENDADR, %edi /* DRAM ending address register */ - movw $4,%cx - xorw %ax,%ax -cleanuplp: - movb (%edi), %al - orb %al,%al - jz emptybank - - addb %ah,%al - jns nottoomuch - - movb $0x7f,%al -nottoomuch: - movb %al,%ah - orb $0x80,%al - movb %al, (%edi) -emptybank: - incl %edi - loop cleanuplp - -#if defined CONFIG_SYS_SDRAM_DRCTMCTL - /* just have your hardware desinger _GIVE_ you what you need here! */ - movl $DRCTMCTL, %edi - movb $CONFIG_SYS_SDRAM_DRCTMCTL,%al - movb (%edi), %al -#else -#if defined(CONFIG_SYS_SDRAM_CAS_LATENCY_2T) || defined(CONFIG_SYS_SDRAM_CAS_LATENCY_3T) - /* set the CAS latency now since it is hard to do - * when we run from the RAM */ - movl $DRCTMCTL, %edi /* DRAM timing register */ - movb (%edi), %al -#ifdef CONFIG_SYS_SDRAM_CAS_LATENCY_2T - andb $0xef, %al -#endif -#ifdef CONFIG_SYS_SDRAM_CAS_LATENCY_3T - orb $0x10, %al -#endif - movb %al, (%edi) -#endif -#endif - movl $DRCCTL, %edi /* DRAM Control register */ - movb $0x3,%al /* Load mode register cmd */ - movb %al, (%edi) - movw %ax, (%esi) - - - movl $DRCCTL, %edi /* DRAM Control register */ - movb $0x18,%al /* Enable refresh and NORMAL mode */ - movb %al, (%edi) - - jmp dram_done - -bad_ram: - xorl %edx,%edx - xorl %edi,%edi - jmp bad_reint - -dram_done: - - /* readback DRCBENDADR and return the number - * of available ram bytes in %eax */ - - movl $DRCBENDADR, %edi /* DRAM ending address register */ - - movl (%edi), %eax - movl %eax, %ecx - andl $0x80000000, %ecx - jz bank2 - andl $0x7f000000, %eax - shrl $2, %eax - movl %eax, %ebx - -bank2: movl (%edi), %eax - movl %eax, %ecx - andl $0x00800000, %ecx - jz bank1 - andl $0x007f0000, %eax - shll $6, %eax - movl %eax, %ebx - -bank1: movl (%edi), %eax - movl %eax, %ecx - andl $0x00008000, %ecx - jz bank0 - andl $0x00007f00, %eax - shll $14, %eax - movl %eax, %ebx - -bank0: movl (%edi), %eax - movl %eax, %ecx - andl $0x00000080, %ecx - jz done - andl $0x0000007f, %eax - shll $22, %eax - movl %eax, %ebx - - -done: - movl %ebx, %eax - -#if CONFIG_SYS_SDRAM_ECC_ENABLE - /* A nominal memory test: just a byte at each address line */ - movl %eax, %ecx - shrl $0x1, %ecx - movl $0x1, %edi -memtest0: - movb $0xa5, (%edi) - cmpb $0xa5, (%edi) - jne out - shrl $1, %ecx - andl %ecx,%ecx - jz set_ecc - shll $1, %edi - jmp memtest0 - -set_ecc: - /* clear all ram with a memset */ - movl %eax, %ecx - xorl %esi, %esi - xorl %edi, %edi - xorl %eax, %eax - shrl $2, %ecx - cld - rep stosl - /* enable read, write buffers */ - movb $0x11, %al - movl $DBCTL, %edi - movb %al, (%edi) - /* enable NMI mapping for ECC */ - movl $ECCINT, %edi - mov $0x10, %al - movb %al, (%edi) - /* Turn on ECC */ - movl $ECCCTL, %edi - mov $0x05, %al - movb %al, (%edi) -#endif -out: - movl %ebx, %eax - jmp *%ebp - -#endif /* CONFIG_SC520 */ -- cgit v1.2.3