From dc9e499c620a590e0f906e807e24c85807af3338 Mon Sep 17 00:00:00 2001 From: Rafal Jaworowski Date: Thu, 16 Mar 2006 17:46:46 +0100 Subject: Support for DDR with 32-data path. Addotional notes on injecting multiple-bit errors. --- cpu/mpc83xx/spd_sdram.c | 61 +++++++++++++++++++++++++++++++++++++++---------- 1 file changed, 49 insertions(+), 12 deletions(-) (limited to 'cpu/mpc83xx/spd_sdram.c') diff --git a/cpu/mpc83xx/spd_sdram.c b/cpu/mpc83xx/spd_sdram.c index 06a7da8f0..b4012a8dd 100644 --- a/cpu/mpc83xx/spd_sdram.c +++ b/cpu/mpc83xx/spd_sdram.c @@ -1,4 +1,7 @@ /* + * (C) Copyright 2006 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * * Copyright 2004 Freescale Semiconductor. * (C) Copyright 2003 Motorola Inc. * Xianghua Xiao (X.Xiao@motorola.com) @@ -73,7 +76,32 @@ int read_spd(uint addr) return ((int) addr); } -long int spd_sdram(int(read_spd)(uint addr)) +#undef SPD_DEBUG +#ifdef SPD_DEBUG +static void spd_debug(spd_eeprom_t *spd) +{ + printf ("\nDIMM type: %-18.18s\n", spd->mpart); + printf ("SPD size: %d\n", spd->info_size); + printf ("EEPROM size: %d\n", 1 << spd->chip_size); + printf ("Memory type: %d\n", spd->mem_type); + printf ("Row addr: %d\n", spd->nrow_addr); + printf ("Column addr: %d\n", spd->ncol_addr); + printf ("# of rows: %d\n", spd->nrows); + printf ("Row density: %d\n", spd->row_dens); + printf ("# of banks: %d\n", spd->nbanks); + printf ("Data width: %d\n", + 256 * spd->dataw_msb + spd->dataw_lsb); + printf ("Chip width: %d\n", spd->primw); + printf ("Refresh rate: %02X\n", spd->refresh); + printf ("CAS latencies: %02X\n", spd->cas_lat); + printf ("Write latencies: %02X\n", spd->write_lat); + printf ("tRP: %d\n", spd->trp); + printf ("tRCD: %d\n", spd->trcd); + printf ("\n"); +} +#endif /* SPD_DEBUG */ + +long int spd_sdram() { volatile immap_t *immap = (immap_t *)CFG_IMMRBAR; volatile ddr8349_t *ddr = &immap->ddr; @@ -85,10 +113,10 @@ long int spd_sdram(int(read_spd)(uint addr)) unsigned char caslat; unsigned int trfc, trfc_clk, trfc_low; -#warning Current spd_sdram does not fit its usage... adjust implementation or API... - CFG_READ_SPD(SPD_EEPROM_ADDRESS, 0, 1, (uchar *) & spd, sizeof (spd)); - +#ifdef SPD_DEBUG + spd_debug(&spd); +#endif if (spd.nrows > 2) { puts("DDR:Only two chip selects are supported on ADS.\n"); return 0; @@ -223,25 +251,31 @@ long int spd_sdram(int(read_spd)(uint addr)) * Only DDR I is supported * DDR I and II have different mode-register-set definition */ - - /* burst length is always 4 */ switch(caslat) { case 2: - ddr->sdram_mode = 0x52; /* 1.5 */ + tmp = 0x50; /* 1.5 */ break; case 3: - ddr->sdram_mode = 0x22; /* 2.0 */ + tmp = 0x20; /* 2.0 */ break; case 4: - ddr->sdram_mode = 0x62; /* 2.5 */ + tmp = 0x60; /* 2.5 */ break; case 5: - ddr->sdram_mode = 0x32; /* 3.0 */ + tmp = 0x30; /* 3.0 */ break; default: puts("DDR:only CAS Latency 1.5, 2.0, 2.5, 3.0 is supported.\n"); return 0; } +#if defined (CONFIG_DDR_32BIT) + /* set burst length to 8 for 32-bit data path */ + tmp |= 0x03; +#else + /* set burst length to 4 - default for 64-bit data path */ + tmp |= 0x02; +#endif + ddr->sdram_mode = tmp; debug("DDR:sdram_mode=0x%08x\n", ddr->sdram_mode); switch(spd.refresh) { @@ -321,6 +355,10 @@ long int spd_sdram(int(read_spd)(uint addr)) */ tmp = 0xc2000000; +#if defined (CONFIG_DDR_32BIT) + /* in 32-Bit mode burst len is 8 beats */ + tmp |= (SDRAM_CFG_32_BE | SDRAM_CFG_8_BE); +#endif /* * sdram_cfg[3] = RD_EN - registered DIMM enable * A value of 0x26 indicates micron registered DIMMS (micron.com) @@ -350,8 +388,7 @@ long int spd_sdram(int(read_spd)(uint addr)) udelay(500); debug("DDR:sdram_cfg=0x%08x\n", ddr->sdram_cfg); - - return memsize;/*in MBytes*/ + return memsize; /*in MBytes*/ } #endif /* CONFIG_SPD_EEPROM */ -- cgit v1.2.3