From 9d803d8c0b7fd9aeb2e708e9e48dd76d7287856d Mon Sep 17 00:00:00 2001 From: Markus Klotzbücher Date: Wed, 8 Feb 2006 18:56:28 +0100 Subject: Changes: * lots of bugfixes in the assembler code * reverted hardware.h back to original * enabled hardware DRAM calibration * GCC-4 fix: modified GLOBAL_DATA_POINTER macro --- include/asm-arm/arch-pxa/hardware.h | 159 +++++++++++++++--------------------- include/asm-arm/global_data.h | 7 +- 2 files changed, 70 insertions(+), 96 deletions(-) (limited to 'include') diff --git a/include/asm-arm/arch-pxa/hardware.h b/include/asm-arm/arch-pxa/hardware.h index a12aea14c..c8c479a18 100644 --- a/include/asm-arm/arch-pxa/hardware.h +++ b/include/asm-arm/arch-pxa/hardware.h @@ -8,6 +8,11 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. + * + * Note: This file was taken from linux-2.4.19-rmk4-pxa1 + * + * - 2003/01/20 implementation specifics activated + * Robert Schwebel */ #ifndef __ASM_ARCH_HARDWARE_H @@ -16,6 +21,16 @@ #include #include + +/* + * These are statically mapped PCMCIA IO space for designs using it as a + * generic IO bus, typically with ISA parts, hardwired IDE interfaces, etc. + * The actual PCMCIA code is mapping required IO region at run time. + */ +#define PCMCIA_IO_0_BASE 0xf6000000 +#define PCMCIA_IO_1_BASE 0xf7000000 + + /* * We requires absolute addresses. */ @@ -29,63 +44,22 @@ #define UNCACHED_ADDR UNCACHED_PHYS_0 /* - * Intel PXA2xx internal register mapping: + * Intel PXA internal I/O mappings: * - * 0x40000000 - 0x41ffffff <--> 0xf2000000 - 0xf3ffffff - * 0x44000000 - 0x45ffffff <--> 0xf4000000 - 0xf5ffffff - * 0x48000000 - 0x49ffffff <--> 0xf6000000 - 0xf7ffffff - * 0x4c000000 - 0x4dffffff <--> 0xf8000000 - 0xf9ffffff - * 0x50000000 - 0x51ffffff <--> 0xfa000000 - 0xfbffffff - * 0x54000000 - 0x55ffffff <--> 0xfc000000 - 0xfdffffff - * 0x58000000 - 0x59ffffff <--> 0xfe000000 - 0xffffffff - * - * Note that not all PXA2xx chips implement all those addresses, and the - * kernel only maps the minimum needed range of this mapping. - */ -#ifndef CONFIG_CPU_MONAHANS -#define io_p2v(x) (0xf2000000 + ((x) & 0x01ffffff) + (((x) & 0x1c000000) >> 1)) -#define io_v2p(x) (0x3c000000 + ((x) & 0x01ffffff) + (((x) & 0x0e000000) << 1)) -#else - -/* There are too many IO area needed to map, so I divide them into 3 areas - * 0x40000000 - 0x41ffffff <--> 0xf6000000 - 0xf7ffffff Devs + * 0x40000000 - 0x41ffffff <--> 0xf8000000 - 0xf9ffffff + * 0x44000000 - 0x45ffffff <--> 0xfa000000 - 0xfbffffff + * 0x48000000 - 0x49ffffff <--> 0xfc000000 - 0xfdffffff */ -#define io_p2v(x) ((((x) & 0xfc000000)>>4) + 0xf2000000 + ((x)&0x01ffffff)) -#define io_v2p(x) (((((x) - 0xf2000000)&0xfc000000)<<4) + ((x)&0x01ffffff)) -/* - * 0x42000000 - 0x421fffff <--> 0xf8000000 - 0xf81fffff MMC2 & USIM2 - * 0x43000000 - 0x430fffff <--> 0xf8200000 - 0xf82fffff Caddo - * 0x43100000 - 0x431fffff <--> 0xf8300000 - 0xf83fffff NAND - * 0x44000000 - 0x440fffff <--> 0xf8400000 - 0xf84fffff LCD - * 0x46000000 - 0x460fffff <--> 0xf8800000 - 0xf88fffff Mini LCD - * 0x48100000 - 0x481fffff <--> 0xf8d00000 - 0xf8dfffff Dynamic Mem Ctl - * 0x4a000000 - 0x4a0fffff <--> 0xf9000000 - 0xf90fffff Static Mem Ctl - * 0x4c000000 - 0x4c0fffff <--> 0xf9400000 - 0xf94fffff USB Host - */ - -#define io_p2v_2(x) (((((x) - 0x42000000) & 0xff000000) >> 3) + 0xf8000000\ - + ((x) & 0x001fffff)) -#define io_v2p_2(x) (((((x) & 0xffe00000) - 0xf8000000) << 3) + 0x42000000\ - + (x & 0x001fffff)) -/* - * 0x50000000 - 0x500fffff <--> 0xfa000000 - 0xfa0fffff Camera Interface - * 0x54000000 - 0x540fffff <--> 0xfa400000 - 0xfa4fffff 2D Graphics Ctrl - * 0x54100000 - 0x541fffff <--> 0xfa500000 - 0xfa5fffff USB Device 2.0 Ctrl - * 0x58000000 - 0x580fffff <--> 0xfa800000 - 0xfa8fffff Internal SRAM Ctrl - */ - -#define io_p2v_3(x) ((((x) & 0xfc000000) >> 4) + 0xf5000000 + \ - ((x) & 0x001fffff)) -#define io_v2p_3(x) (((((x) - 0xf5000000) & 0x0fc00000) << 4) + \ - ((x) & 0x001fffff)) -#endif /* CONFIG_CPU_MONAHANS */ +/* FIXME: Only this does work for u-boot... find out why... [RS] */ +#define UBOOT_REG_FIX 1 +#ifndef UBOOT_REG_FIX #ifndef __ASSEMBLY__ -#if 0 -# define __REG(x) (*((volatile u32 *)io_p2v(x))) -#else +#define io_p2v(x) ( ((x) | 0xbe000000) ^ (~((x) >> 1) & 0x06000000) ) +#define io_v2p( x ) ( ((x) & 0x41ffffff) ^ ( ((x) & 0x06000000) << 1) ) + /* * This __REG() version gives the same results as the one above, except * that we are fooling gcc somehow so it generates far better and smaller @@ -96,56 +70,66 @@ typedef struct { volatile u32 offset[4096]; } __regbase; # define __REGP(x) ((__regbase *)((x)&~4095))->offset[((x)&4095)>>2] # define __REG(x) __REGP(io_p2v(x)) +#endif -/* __REG_2 is for NAND, LCD etc. - * __REG_3 is for Camera Interface, 2D Graphics, U2D etc.*/ -#ifdef CONFIG_CPU_MONAHANS -#define __REG_2(x) __REGP(io_p2v_2(x)) -#define __REG_3(x) __REGP(io_p2v_3(x)) - -#endif /* CONFIG_CPU_MONAHANS */ -#endif /* if 0 */ - -/* With indexed regs we don't want to feed the index through io_p2v() - especially if it is a variable, otherwise horrible code will result. */ -# define __REG2(x,y) (*(volatile u32 *)((u32)&__REG(x) + (y))) +/* Let's kick gcc's ass again... */ +# define __REG2(x,y) \ + ( __builtin_constant_p(y) ? (__REG((x) + (y))) \ + : (*(volatile u32 *)((u32)&__REG(x) + (y))) ) # define __PREG(x) (io_v2p((u32)&(x))) -#else /* ifndef __ASSEMBLY__ */ +#else # define __REG(x) io_p2v(x) # define __PREG(x) io_v2p(x) -#ifdef CONFIG_CPU_MONAHANS -# define __REG_2(x) io_p2v(x) -# define __REG_3(x) io_p2v(x) -#endif /* CONFIG_CPU_MONAHANS */ +# undef io_p2v +# undef __REG +# ifndef __ASSEMBLY__ +# define io_p2v(PhAdd) (PhAdd) +# define __REG(x) (*((volatile u32 *)io_p2v(x))) +# define __REG2(x,y) (*(volatile u32 *)((u32)&__REG(x) + (y))) +# else +# define __REG(x) (x) +# ifdef CONFIG_CPU_MONAHANS /* Hack to make this work with mona's pxa-regs.h */ +# define __REG_2(x) (x) +# define __REG_3(x) (x) +# endif +# endif +#endif /* UBOOT_REG_FIX */ -#endif /* ifndef __ASSEMBLY__ */ +#include "pxa-regs.h" #ifndef __ASSEMBLY__ -#ifdef CONFIG_MACH_ZYLONITE -#include "zylonite.h" -#endif +/* + * GPIO edge detection for IRQs: + * IRQs are generated on Falling-Edge, Rising-Edge, or both. + * This must be called *before* the corresponding IRQ is registered. + * Use this instead of directly setting GRER/GFER. + */ +#define GPIO_FALLING_EDGE 1 +#define GPIO_RISING_EDGE 2 +#define GPIO_BOTH_EDGES 3 +extern void set_GPIO_IRQ_edge( int gpio_nr, int edge_mask ); /* * Handy routine to set GPIO alternate functions */ -extern void pxa_gpio_mode( int gpio_mode ); +extern void set_GPIO_mode( int gpio_mode ); /* - * Routine to enable or disable CKEN + * return current lclk frequency in units of 10kHz */ -extern void pxa_set_cken(int clock, int enable); +extern unsigned int get_lclk_frequency_10khz(void); + +#endif + /* - * return current memory and LCD clock frequency in units of 10kHz + * Implementation specifics */ -extern unsigned int get_memclk_frequency_10khz(void); -extern unsigned int get_lcdclk_frequency_10khz(void); -#endif /* __ASSEMBLY__ */ #ifdef CONFIG_ARCH_LUBBOCK #include "lubbock.h" @@ -159,15 +143,6 @@ extern unsigned int get_lcdclk_frequency_10khz(void); #include "cerf.h" #endif -#if CONFIG_CPU_MONAHANS_L2CACHE -#define __cpuc_flush_l2cache_all xscale_flush_l2cache_all -extern void __cpuc_flush_l2cache_all(void); -#define flush_l2cache_all __cpuc_flush_l2cache_all -#else -#define __cpuc_flush_l2cache_all() do {} while (0) -#define flush_l2cache_all() do {} while (0) -#endif - #ifdef CONFIG_ARCH_CSB226 #include "csb226.h" #endif @@ -180,10 +155,4 @@ extern void __cpuc_flush_l2cache_all(void); #include "pleb.h" #endif -#ifdef CONFIG_MACH_MAINSTONE -#include "mainstone.h" -#endif - -#include "pxa-regs.h" - -#endif /* _ASM_ARCH_HARDWARE_H */ +#endif /* _ASM_ARCH_HARDWARE_H */ diff --git a/include/asm-arm/global_data.h b/include/asm-arm/global_data.h index c2d52915a..b3c708435 100644 --- a/include/asm-arm/global_data.h +++ b/include/asm-arm/global_data.h @@ -61,6 +61,11 @@ typedef struct global_data { #define GD_FLG_DEVINIT 0x00002 /* Devices have been initialized */ #define GD_FLG_SILENT 0x00004 /* Silent mode */ -#define DECLARE_GLOBAL_DATA_PTR register volatile gd_t *gd asm ("r8") +#define GCC_4_SCREW_GDP 1 +#ifdef GCC_4_SCREW_GDP +# define DECLARE_GLOBAL_DATA_PTR register gd_t* volatile gd asm ("r8"); +#else +# define DECLARE_GLOBAL_DATA_PTR register volatile gd_t *gd asm ("r8") +#endif #endif /* __ASM_GBL_DATA_H */ -- cgit v1.2.3