/* * Copyright 2004, 2007-2009 Freescale Semiconductor, Inc. * (C) Copyright 2003 Motorola Inc. * Xianghua Xiao, (X.Xiao@motorola.com) * * (C) Copyright 2000 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #include #include #include #include DECLARE_GLOBAL_DATA_PTR; /* --------------------------------------------------------------- */ void get_sys_info (sys_info_t * sysInfo) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); uint plat_ratio,e500_ratio,half_freqSystemBus; uint lcrr_div; int i; #ifdef CONFIG_QE u32 qe_ratio; #endif plat_ratio = (gur->porpllsr) & 0x0000003e; plat_ratio >>= 1; sysInfo->freqSystemBus = plat_ratio * CONFIG_SYS_CLK_FREQ; /* Divide before multiply to avoid integer * overflow for processor speeds above 2GHz */ half_freqSystemBus = sysInfo->freqSystemBus/2; for (i = 0; i < cpu_numcores(); i++) { e500_ratio = ((gur->porpllsr) >> (i * 8 + 16)) & 0x3f; sysInfo->freqProcessor[i] = e500_ratio * half_freqSystemBus; } /* Note: freqDDRBus is the MCLK frequency, not the data rate. */ sysInfo->freqDDRBus = sysInfo->freqSystemBus; #ifdef CONFIG_DDR_CLK_FREQ { u32 ddr_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO) >> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT; if (ddr_ratio != 0x7) sysInfo->freqDDRBus = ddr_ratio * CONFIG_DDR_CLK_FREQ; } #endif #ifdef CONFIG_QE qe_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_QE_RATIO) >> MPC85xx_PORPLLSR_QE_RATIO_SHIFT; sysInfo->freqQE = qe_ratio * CONFIG_SYS_CLK_FREQ; #endif #if defined(CONFIG_SYS_LBC_LCRR) /* We will program LCRR to this value later */ lcrr_div = CONFIG_SYS_LBC_LCRR & LCRR_CLKDIV; #else { volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); lcrr_div = in_be32(&lbc->lcrr) & LCRR_CLKDIV; } #endif if (lcrr_div == 2 || lcrr_div == 4 || lcrr_div == 8) { #if !defined(CONFIG_MPC8540) && !defined(CONFIG_MPC8541) && \ !defined(CONFIG_MPC8555) && !defined(CONFIG_MPC8560) /* * Yes, the entire PQ38 family use the same * bit-representation for twice the clock divider values. */ lcrr_div *= 2; #endif sysInfo->freqLocalBus = sysInfo->freqSystemBus / lcrr_div; } else { /* In case anyone cares what the unknown value is */ sysInfo->freqLocalBus = lcrr_div; } } int get_clocks (void) { sys_info_t sys_info; #ifdef CONFIG_MPC8544 volatile ccsr_gur_t *gur = (void *) CONFIG_SYS_MPC85xx_GUTS_ADDR; #endif #if defined(CONFIG_CPM2) volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR; uint sccr, dfbrg; /* set VCO = 4 * BRG */ cpm->im_cpm_intctl.sccr &= 0xfffffffc; sccr = cpm->im_cpm_intctl.sccr; dfbrg = (sccr & SCCR_DFBRG_MSK) >> SCCR_DFBRG_SHIFT; #endif get_sys_info (&sys_info); gd->cpu_clk = sys_info.freqProcessor[0]; gd->bus_clk = sys_info.freqSystemBus; gd->mem_clk = sys_info.freqDDRBus; gd->lbc_clk = sys_info.freqLocalBus; #ifdef CONFIG_QE gd->qe_clk = sys_info.freqQE; gd->brg_clk = gd->qe_clk / 2; #endif /* * The base clock for I2C depends on the actual SOC. Unfortunately, * there is no pattern that can be used to determine the frequency, so * the only choice is to look up the actual SOC number and use the value * for that SOC. This information is taken from application note * AN2919. */ #if defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || \ defined(CONFIG_MPC8560) || defined(CONFIG_MPC8555) gd->i2c1_clk = sys_info.freqSystemBus; #elif defined(CONFIG_MPC8544) /* * On the 8544, the I2C clock is the same as the SEC clock. This can be * either CCB/2 or CCB/3, depending on the value of cfg_sec_freq. See * 4.4.3.3 of the 8544 RM. Note that this might actually work for all * 85xx, but only the 8544 has cfg_sec_freq, so it's unknown if the * PORDEVSR2_SEC_CFG bit is 0 on all 85xx boards that are not an 8544. */ if (gur->pordevsr2 & MPC85xx_PORDEVSR2_SEC_CFG) gd->i2c1_clk = sys_info.freqSystemBus / 3; else gd->i2c1_clk = sys_info.freqSystemBus / 2; #else /* Most 85xx SOCs use CCB/2, so this is the default behavior. */ gd->i2c1_clk = sys_info.freqSystemBus / 2; #endif gd->i2c2_clk = gd->i2c1_clk; #if defined(CONFIG_MPC8536) gd->sdhc_clk = gd->bus_clk / 2; #endif #if defined(CONFIG_CPM2) gd->vco_out = 2*sys_info.freqSystemBus; gd->cpm_clk = gd->vco_out / 2; gd->scc_clk = gd->vco_out / 4; gd->brg_clk = gd->vco_out / (1 << (2 * (dfbrg + 1))); #endif if(gd->cpu_clk != 0) return (0); else return (1); } /******************************************** * get_bus_freq * return system bus freq in Hz *********************************************/ ulong get_bus_freq (ulong dummy) { return gd->bus_clk; } /******************************************** * get_ddr_freq * return ddr bus freq in Hz *********************************************/ ulong get_ddr_freq (ulong dummy) { return gd->mem_clk; }