/* * Copyright (C) 2008, Guennadi Liakhovetski * * Configuration settings for the MX31ADS Freescale board. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #ifndef __CONFIG_H #define __CONFIG_H #include /* High Level Configuration Options */ #define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */ #define CONFIG_MX31 1 /* in a mx31 */ #define CONFIG_MX31_HCLK_FREQ 26000000 /* RedBoot says 26MHz */ #define CONFIG_MX31_CLK32 32000 #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO /* * Disabled for now due to build problems under Debian and * a significant increase in the final file size: 144260 vs. 109536 Bytes */ #if 0 #define CONFIG_OF_LIBFDT 1 #define CONFIG_FIT 1 #define CONFIG_FIT_VERBOSE 1 #endif #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS 1 #define CONFIG_INITRD_TAG 1 /* * Size of malloc() pool */ #define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128 * 1024) #define CFG_GBL_DATA_SIZE 128 /* num bytes reserved for initial data */ /* * Hardware drivers */ #define CONFIG_MX31_UART 1 #define CFG_MX31_UART1 1 /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 115200 #define CFG_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} /*********************************************************** * Command definition ***********************************************************/ #include #define CONFIG_CMD_MII #define CONFIG_CMD_PING #define CONFIG_BOOTDELAY 3 #define CONFIG_NETMASK 255.255.255.0 #define CONFIG_IPADDR 192.168.23.168 #define CONFIG_SERVERIP 192.168.23.2 #define CONFIG_EXTRA_ENV_SETTINGS \ "bootargs_base=setenv bootargs console=ttymxc0,115200\0" \ "bootargs_nfs=setenv bootargs $(bootargs) root=/dev/nfs " \ "ip=dhcp nfsroot=$(serverip):$(nfsrootfs),v3,tcp\0" \ "bootcmd=run bootcmd_net\0" \ "bootcmd_net=run bootargs_base bootargs_mtd bootargs_nfs; " \ "tftpboot 0x80000000 uImage-mx31; bootm\0" \ "prg_uboot=tftpboot 0x80000000 u-boot-mx31ads.bin; " \ "protect off 0xa0000000 0xa001ffff; " \ "erase 0xa0000000 0xa001ffff; " \ "cp.b 0x80000000 0xa0000000 $(filesize)\0" #define CONFIG_DRIVER_CS8900 1 #define CS8900_BASE 0xb4020300 #define CS8900_BUS16 1 /* the Linux driver does accesses as shorts */ /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ /* Print Buffer Size */ #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) #define CFG_MAXARGS 16 /* max number of command args */ #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ #define CFG_MEMTEST_START 0 /* memtest works on */ #define CFG_MEMTEST_END 0x10000 #undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ #define CFG_LOAD_ADDR CSD0_BASE /* default load address */ #define CFG_HZ 32000 #define CONFIG_CMDLINE_EDITING 1 /*----------------------------------------------------------------------- * Stack sizes * * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ /*----------------------------------------------------------------------- * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM_1 CSD0_BASE #define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024) /*----------------------------------------------------------------------- * FLASH and environment organization */ #define CFG_FLASH_BASE CS0_BASE #define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ #define CFG_MAX_FLASH_SECT 262 /* max number of sectors on one chip */ #define CFG_MONITOR_BASE CFG_FLASH_BASE /* Monitor at beginning of flash */ #define CFG_MONITOR_LEN (128 * 1024) /* Reserve 128KiB */ #define CFG_ENV_IS_IN_FLASH 1 #define CFG_ENV_SECT_SIZE (32 * 1024) #define CFG_ENV_SIZE CFG_ENV_SECT_SIZE /* S29WS256N NOR flash has 4 32KiB small sectors at beginning and end. * The rest of 32MiB is in 128KiB big sectors. * U-Boot occupies the low 4 sectors, * if we put environment next to it, we will have to occupy 128KiB for it. * Putting it at the top of flash we use only 32KiB. */ #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 32 * 1024 * 1024 - CFG_ENV_SIZE) /*----------------------------------------------------------------------- * CFI FLASH driver setup */ #define CFG_FLASH_CFI 1 /* Flash memory is CFI compliant */ #define CFG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */ #if 0 /* Doesn't work yet, work in progress */ #define CFG_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes(~10x faster)*/ #endif #define CFG_FLASH_PROTECTION 1 /* Use hardware sector protection */ /* * JFFS2 partitions */ #undef CONFIG_JFFS2_CMDLINE #define CONFIG_JFFS2_DEV "nor0" #endif /* __CONFIG_H */