1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
|
/*
* (C) Copyright 2002
* Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
*
* (C) Copyright 2002
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
* Marius Groeger <mgroeger@sysgo.de>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <i2c.h>
#include <da9030.h>
#include <asm/arch/pxa-regs.h>
/* ------------------------------------------------------------------------- */
static void init_DA9030(void);
/*
* Miscelaneous platform dependent initialisations
*/
int board_init (void)
{
DECLARE_GLOBAL_DATA_PTR;
/* memory and cpu-speed are setup before relocation */
/* so we do _nothing_ here */
/* arch number of Lubbock-Board mk@tbd: fix this! */
gd->bd->bi_arch_number = MACH_TYPE_LUBBOCK;
/* adress of boot parameters */
gd->bd->bi_boot_params = 0xa0000100;
return 0;
}
int board_late_init(void)
{
setenv("stdout", "serial");
setenv("stderr", "serial");
init_DA9030();
return 0;
}
int dram_init (void)
{
DECLARE_GLOBAL_DATA_PTR;
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
gd->bd->bi_dram[2].start = PHYS_SDRAM_3;
gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE;
gd->bd->bi_dram[3].start = PHYS_SDRAM_4;
gd->bd->bi_dram[3].size = PHYS_SDRAM_4_SIZE;
return 0;
}
/* initialize the DA9030 Power Controller */
static void init_DA9030()
{
uchar addr = (uchar) DA9030_I2C_ADDR, val = 0;
/* setup I2C GPIO's */
GPIO32 = 0x801; /* SCL = Alt. Fkt. 1 */
GPIO33 = 0x801; /* SDA = Alt. Fkt. 1 */
/* rising Edge on EXTON */
GPIO17 = 0xc800; /* enable pullup */
GPDR0 |= (1<<17); /* GPIO17 is output */
GSDR0 = (1<<17);
GPCR0 = (1<<17); /* drive GPIO17 low */
udelay(5);
GPSR0 = (1<<17); /* drive GPIO17 high */
#if CFG_DA9030_EXTON_DELAY
udelay((unsigned long) CFG_DA9030_EXTON_DELAY); /* wait for DA9030 */
#endif
GPCR0 = (1<<17); /* drive GPIO17 low */
GPIO17 = 0x8800; /* disable pullup */
/* reset the watchdog and go active (0xec) */
val = (SYS_CONTROL_A_HWRES_ENABLE |
(0x6<<4) |
SYS_CONTROL_A_WDOG_ACTION |
SYS_CONTROL_A_WATCHDOG);
if(i2c_write(addr, SYS_CONTROL_A, 1, &val, 1)) {
printf("Error accessing DA9030 via i2c.\n");
return;
}
i2c_reg_write(addr, REG_CONTROL_1_97, 0xfd); /* disable LDO1, enable LDO6 */
i2c_reg_write(addr, LDO2_3, 0xd1); /* LDO2 =1,9V, LDO3=3,1V */
i2c_reg_write(addr, LDO4_5, 0xcc); /* LDO2 =1,9V, LDO3=3,1V */
i2c_reg_write(addr, LDO6_SIMCP, 0x3e); /* LDO6=3,2V, SIMCP = 5V support */
i2c_reg_write(addr, LDO7_8, 0xc9); /* LDO7=2,7V, LDO8=3,0V */
i2c_reg_write(addr, LDO9_12, 0xec); /* LDO9=3,0V, LDO12=3,2V */
i2c_reg_write(addr, BUCK, 0x0c); /* Buck=1.2V */
i2c_reg_write(addr, REG_CONTROL_2_98, 0x7f); /* All LDO'S on 8,9,10,11,12,14 */
i2c_reg_write(addr, LDO_10_11, 0xcc); /* LDO10=3.0V LDO11=3.0V */
i2c_reg_write(addr, LDO_15, 0xae); /* LDO15=1.8V, dislock first 3bit */
i2c_reg_write(addr, LDO_14_16, 0x05); /* LDO14=2.8V, LDO16=NB */
i2c_reg_write(addr, LDO_18_19, 0x9c); /* LDO18=3.0V, LDO19=2.7V */
i2c_reg_write(addr, LDO_17_SIMCP0, 0x2c); /* LDO17=3.0V, SIMCP=3V support */
i2c_reg_write(addr, BUCK2_DVC1, 0x9a); /* Buck2=1.5V plus Update support of 520 MHz */
i2c_reg_write(addr, REG_CONTROL_2_18, 0x43); /* Ball on */
i2c_reg_write(addr, MISC_CONTROLB, 0x08); /* session valid enable */
i2c_reg_write(addr, USBPUMP, 0xc1); /* start pump, ignore HW signals */
val = i2c_reg_read(addr, STATUS);
if(val & STATUS_CHDET)
printf("Charger detected, turning on LED.\n");
else {
printf("No charger detetected.\n");
/* undervoltage? print error and power down */
}
}
#if 0
/* reset the DA9030 watchdog */
void hw_watchdog_reset(void)
{
uchar addr = (uchar) DA9030_I2C_ADDR, val = 0;
val = i2c_reg_read(addr, SYS_CONTROL_A);
val |= SYS_CONTROL_A_WATCHDOG;
i2c_reg_write(addr, SYS_CONTROL_A, val);
}
#endif
|
