diff options
| author | Joao Pinto <jpinto@synopsys.com> | 2016-06-09 11:40:30 +0100 |
|---|---|---|
| committer | Thomas Petazzoni <thomas.petazzoni@free-electrons.com> | 2016-06-09 22:04:35 +0200 |
| commit | 234d81bf333b7eef52d009b3ecc25cfd7b484b29 (patch) | |
| tree | 101363e7922f044840a3a9f635f554cf48d38033 /board/arm | |
| parent | 725ff29fb7290de6467f9df462b48378552410a6 (diff) | |
configs/arm_juno: add support for Juno r2
Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Diffstat (limited to 'board/arm')
| -rw-r--r-- | board/arm/juno/readme.txt | 17 |
1 files changed, 16 insertions, 1 deletions
diff --git a/board/arm/juno/readme.txt b/board/arm/juno/readme.txt index 52fabf9b4..9314bb0ee 100644 --- a/board/arm/juno/readme.txt +++ b/board/arm/juno/readme.txt @@ -6,6 +6,7 @@ Intro These instructions apply to all models of the ARM Juno: - Juno r0 (does not support PCIe) - Juno r1 (supports PCIe) + - Juno r2 (Big Cluster with A72) Buildroot will generate the kernel image, device tree blob and a minimal root filesystem. @@ -41,6 +42,7 @@ After building, you should obtain this tree: +-- rootfs.tar +-- juno.dtb (if Juno r0 is used) +-- juno-r1.dtb (if Juno r1 is used) + +-- juno-r2.dtb (if Juno r2 is used) +-- Image Preparing your rootfs @@ -89,6 +91,19 @@ NOR3LOAD: 00000000 ;Image Load Address NOR3ENTRY: 00000000 ;Image Entry Point ...... +Configure *.dtb in the boot configuration for Juno r2 +===================================================== + +SITE1/HBI0262D/images.txt +...... +NOR3UPDATE: AUTO ;Image Update:NONE/AUTO/FORCE +NOR3ADDRESS: 0x02000000 ;Image Flash Address +NOR3FILE: \SOFTWARE\juno-r2.dtb ;Image File Name +NOR3NAME: board.dtb ;Specify target filename to preserve file extension +NOR3LOAD: 00000000 ;Image Load Address +NOR3ENTRY: 00000000 ;Image Entry Point +...... + Installing kernel image and DTB =============================== @@ -97,7 +112,7 @@ Installing kernel image and DTB A mass storage device should appear in your desktop. 3. Open the software/ folder 4. Copy the 'Image' file to software/ -5. Copy the 'juno-r1.dtb' (r1) or the 'juno.dtb' (r0) file to software/ +5. Copy the 'juno-r1.dtb' (r1), 'juno.dtb' (r0) or juno-r2.dtb (r2) file to software/ 6. Press the red button in the front pannel of ARM Juno At this time, the board will erase the Flash entry for each new item and |