wandboard: Use U-Boot 2016.07

Upgrade U-Boot version to 2016.07 and make proper use of U-Boot
distro configuration features.

Provide a boot.scr binary script that is one of the standard ways to
pass a U-Boot script with distro features enabled.

With this method the uboot-env.txt file is no longer needed, so it is
removed.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

4 files changed, 15 insertions, 35 deletions

diff --git a/board/wandboard/boot.scr.txt b/board/wandboard/boot.scr.txt
new file mode 100644
index 000000000..7a8aa4bd5
--- /dev/null
+++ b/board/wandboard/boot.scr.txt
@@ -0,0 +1,7 @@
+setenv finduuid "part uuid mmc 0:1 uuid"
+run finduuid
+run findfdt
+setenv bootargs "console=ttymxc0,115200 root=PARTUUID=${uuid} rootwait rootfstype=ext4"
+load mmc 0:1 ${fdt_addr} boot/${fdtfile}
+load mmc 0:1 ${loadaddr} boot/zImage
+bootz ${loadaddr} - ${fdt_addr}
diff --git a/board/wandboard/genimage.cfg b/board/wandboard/genimage.cfg
index f5df1ff88..32c7c16c8 100644
--- a/board/wandboard/genimage.cfg
+++ b/board/wandboard/genimage.cfg
@@ -23,13 +23,6 @@ image sdcard.img {
     offset = 70656
   }
 
-  partition u-boot-env {
-    in-partition-table = "no"
-    image = "uboot-env.bin"
-    offset = 393216
-    size = 8192
-  }
-
   partition rootfs {
     partition-type = 0x83
     image = "rootfs.ext2"
diff --git a/board/wandboard/post-build.sh b/board/wandboard/post-build.sh
new file mode 100755
index 000000000..07c480e61
--- /dev/null
+++ b/board/wandboard/post-build.sh
@@ -0,0 +1,8 @@
+#!/bin/sh
+
+BOARD_DIR="$(dirname $0)"
+
+$HOST_DIR/usr/bin/mkimage -A arm -O linux -T script -C none  \
+-n "boot script" -d $BOARD_DIR/boot.scr.txt $BOARD_DIR/boot.scr
+
+install -m 0644 -D $BOARD_DIR/boot.scr $TARGET_DIR/boot/boot.scr
diff --git a/board/wandboard/uboot-env.txt b/board/wandboard/uboot-env.txt
deleted file mode 100644
index f8c4fc139..000000000
--- a/board/wandboard/uboot-env.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-baudrate=115200
-boot_fdt=try
-bootcmd=run findfdt; mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi
-bootdelay=3
-bootscript=echo Running bootscript from mmc ...; source
-console=ttymxc0
-ethact=FEC
-ethaddr=00:1f:7b:b2:05:ee
-ethprime=FEC
-loadaddr=0x12000000
-fdt_addr=0x18000000
-fdt_high=0xffffffff
-fdtfile=undefined
-findfdt=if test $board_rev = MX6Q ; then setenv fdtfile imx6q-wandboard.dtb; fi; if test $board_rev = MX6DL ; then setenv fdtfile imx6dl-wandboard.dtb; fi; if test $fdtfile = undefined; then echo WARNING: Could not determine dtb to use; fi;
-loadfdt=ext2load mmc ${mmcdev}:${mmcpart} ${fdt_addr} /boot/${fdtfile}
-loadbootscript=ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};
-loadimage=ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}
-mmcargs=setenv bootargs console=${console},${baudrate} root=${mmcroot}; run videoargs
-videoargs=setenv nextcon 0; if hdmidet; then setenv bootargs ${bootargs} video=mxcfb${nextcon}:dev=hdmi,1280x720M@60,if=RGB24; setenv fbmen fbmem=28M; setexpr nextcon ${nextcon} + 1; else echo - no HDMI monitor;fi; i2c dev 1; if i2c probe 0x10; then setenv bootargs ${bootargs} video=mxcfb${nextcon}:dev=lcd,800x480@60,if=RGB666,bpp=32; if test 0 -eq ${nextcon}; then setenv fbmem fbmem=10M; else setenv fbmem ${fbmem},10M; fi; setexpr nextcon ${nextcon} + 1; else echo '- no FWBADAPT-7WVGA-LCD-F07A-0102 display';fi; setenv bootargs ${bootargs} ${fbmem}
-mmcboot=echo Booting from mmc ...; run mmcargs; if test ${boot_fdt} = yes || test ${boot_fdt} = try; then if run loadfdt; then bootz ${loadaddr} - ${fdt_addr}; else if test ${boot_fdt} = try; then bootz; else echo WARN: Cannot load the DT; fi; fi; else bootz; fi;
-mmcdev=0
-mmcpart=1
-mmcroot=/dev/mmcblk2p1 rootwait rw
-netargs=setenv bootargs console=${console},${baudrate} root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp
-netboot=echo Booting from net ...; run netargs; if test ${ip_dyn} = yes; then setenv get_cmd dhcp; else setenv get_cmd tftp; fi; ${get_cmd} ${image}; if test ${boot_fdt} = yes || test ${boot_fdt} = try; then if ${get_cmd} ${fdt_addr} /boot/${fdtfile}; then bootz ${loadaddr} - ${fdt_addr}; else if test ${boot_fdt} = try; then bootz; else echo WARN: Cannot load the DT; fi; fi; else bootz; fi;
-script=boot/boot.scr
-image=boot/zImage
-splashpos=m,m