configs/imx6q-sabresd: Add new defconfig

Add imx6q-sabresd_defconfig which supports imx6q-sabresd board using
mainline U-Boot and mainline kernel.

Keep freescale_imx6qsabresd_defconfig for those who want to run U-Boot and
kernel versions from NXP.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

1 files changed, 57 insertions, 0 deletions

diff --git a/board/freescale/imx6q-sabresd/readme.txt b/board/freescale/imx6q-sabresd/readme.txt
new file mode 100644
index 000000000..10e973cf9
--- /dev/null
+++ b/board/freescale/imx6q-sabresd/readme.txt
@@ -0,0 +1,57 @@
+*******************************
+Freescale i.MX6Q Sabre SD board
+*******************************
+
+This file documents the Buildroot support for the Freescale i.MX6Q Sabre SD
+board.
+
+This configuration uses U-Boot mainline and kernel mainline.
+
+Build
+=====
+
+First, configure Buildroot for the i.MX6Q Sabre SD board:
+
+  make imx6q-sabresd_defconfig
+
+Build all components:
+
+  make
+
+You will find the following files in output/images/ :
+  - imx6q-sabresd.dtb
+  - rootfs.ext4
+  - rootfs.tar
+  - sdcard.img
+  - u-boot.imx
+  - zImage
+
+Create a bootable SD card
+=========================
+
+To determine the device associated to the SD card have a look in the
+/proc/partitions file:
+
+  cat /proc/partitions
+
+Buildroot prepares a bootable "sdcard.img" image in the output/images/
+directory, ready to be dumped on a SD card. Launch the following
+command as root:
+
+  dd if=output/images/sdcard.img of=/dev/<your-sd-device>
+
+*** WARNING! This will destroy all the card content. Use with care! ***
+
+For details about the medium image layout, see the definition in
+board/freescale/common/imx/genimage.cfg.template.
+
+Boot the i.MX6Q Sabre SD board
+==============================
+
+To boot your newly created system:
+- insert the SD card in the SD3 slot of the board (close to the HDMI connector);
+- put a micro USB cable into the Debug USB Port and connect using a terminal
+  emulator at 115200 bps, 8n1;
+- power on the board.
+
+Enjoy!