board: add support for chiliBoard

Board support package includes:

 * Buildroot defconfig
 * Mainline Linux kernel v4.9.6
 * Mainline U-Boot (current HEAD revision is used, as board support
   patches are not in stable release yet)
 * genimage config to create sdcard image
 * Board readme.txt

[Peter: use http:// instead of git:// for u-boot]
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

3 files changed, 91 insertions, 0 deletions

diff --git a/board/grinn/chiliboard/genimage.cfg b/board/grinn/chiliboard/genimage.cfg
new file mode 100644
index 000000000..ffe027e7a
--- /dev/null
+++ b/board/grinn/chiliboard/genimage.cfg
@@ -0,0 +1,31 @@
+# Minimal microSD card image for Grinn's chiliBoard
+#
+
+image boot.vfat {
+  vfat {
+    files = {
+      "MLO",
+      "u-boot.img",
+      "am335x-chiliboard.dtb",
+      "zImage"
+    }
+  }
+  size = 16M
+}
+
+image sdcard.img {
+  hdimage {
+  }
+
+  partition u-boot {
+    partition-type = 0xC
+    bootable = "true"
+    image = "boot.vfat"
+    offset = 1M
+  }
+
+  partition rootfs {
+    partition-type = 0x83
+    image = "rootfs.ext4"
+  }
+}
diff --git a/board/grinn/chiliboard/post-image.sh b/board/grinn/chiliboard/post-image.sh
new file mode 100755
index 000000000..1a076eecb
--- /dev/null
+++ b/board/grinn/chiliboard/post-image.sh
@@ -0,0 +1,14 @@
+#!/usr/bin/env bash
+
+BOARD_DIR="$(dirname $0)"
+GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
+GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
+
+rm -rf "${GENIMAGE_TMP}"
+
+genimage \
+    --rootpath "${TARGET_DIR}" \
+    --tmppath "${GENIMAGE_TMP}" \
+    --inputpath "${BINARIES_DIR}" \
+    --outputpath "${BINARIES_DIR}" \
+    --config "${GENIMAGE_CFG}"
diff --git a/board/grinn/chiliboard/readme.txt b/board/grinn/chiliboard/readme.txt
new file mode 100644
index 000000000..676aa7040
--- /dev/null
+++ b/board/grinn/chiliboard/readme.txt
@@ -0,0 +1,46 @@
+**********
+chiliBoard
+**********
+
+Build
+=====
+
+First, configure Buildroot for your chiliBoard:
+
+  make grinn_chiliboard_defconfig
+
+Build image:
+
+  make
+
+After building you should get a tree like this:
+
+  output/images/
+  ├── am335x-chiliboard.dtb
+  ├── boot.vfat
+  ├── MLO
+  ├── rootfs.ext2
+  ├── rootfs.ext4
+  ├── rootfs.tar
+  ├── sdcard.img
+  ├── u-boot.img
+  └── zImage
+
+Create a bootable microSD card
+==============================
+
+Buildroot prepares a bootable microSD card image "sdcard.img" in output/images/
+directory, To flash SD card just run the following command:
+
+  sudo dd if=output/images/sdcard.img of=/dev/<sd_card> bs=1M
+
+where <sd_card> can be sdX or mmcblkX
+
+*** WARNING! This will destroy all contents of device you specify! ***
+
+Boot chiliBoard
+===============
+
+- insert the microSD card in the microSD slot of the board;
+- plug micro USB cable to provide power and console interface
+- use terminal emulator with 115200 bps, 8n1