diff options
Diffstat (limited to 'board')
-rw-r--r-- | board/freescale/imx23evk/readme.txt | 48 |
1 files changed, 48 insertions, 0 deletions
diff --git a/board/freescale/imx23evk/readme.txt b/board/freescale/imx23evk/readme.txt new file mode 100644 index 000000000..6574577dc --- /dev/null +++ b/board/freescale/imx23evk/readme.txt @@ -0,0 +1,48 @@ +************************** +Freescale i.MX23 EVK board +************************** + +This file documents the Buildroot support for the Freescale i.MX23 EVK board. + +Build +===== + +First, configure Buildroot for your i.MX23 EVK board: + + make imx23evk_defconfig + +Build all components: + + make + +You will find in output/images/ directory the following files: + - imx23-evk.dtb + - rootfs.tar + - u-boot.sd + - zImage + +Create a bootable SD card +========================= + +To determine the device associated to the SD card have a look in the +/proc/partitions file: + + cat /proc/partitions + +Then, run the following command: + +*** WARNING! The command will destroy all the card content. Use with care! *** + + sudo dd if=output/images/sdcard.img of=/dev/<your-microsd-device> + +Boot the i.MX23 EVK board +========================= + +- Put the Boot Mode Select jumper as 1 0 0 1 so that it can boot + from the SD card +- Insert the SD card in the SD Card slot of the board; +- Connect an RS232 UART cable to the Debug UART Port and connect using a + terminal emulator at 115200 bps, 8n1; +- power on the board. + +Enjoy! |