diff options
Diffstat (limited to 'board')
-rw-r--r-- | board/grinn/chiliboard/genimage.cfg | 31 | ||||
-rwxr-xr-x | board/grinn/chiliboard/post-image.sh | 14 | ||||
-rw-r--r-- | board/grinn/chiliboard/readme.txt | 46 |
3 files changed, 91 insertions, 0 deletions
diff --git a/board/grinn/chiliboard/genimage.cfg b/board/grinn/chiliboard/genimage.cfg new file mode 100644 index 000000000..ffe027e7a --- /dev/null +++ b/board/grinn/chiliboard/genimage.cfg @@ -0,0 +1,31 @@ +# Minimal microSD card image for Grinn's chiliBoard +# + +image boot.vfat { + vfat { + files = { + "MLO", + "u-boot.img", + "am335x-chiliboard.dtb", + "zImage" + } + } + size = 16M +} + +image sdcard.img { + hdimage { + } + + partition u-boot { + partition-type = 0xC + bootable = "true" + image = "boot.vfat" + offset = 1M + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + } +} diff --git a/board/grinn/chiliboard/post-image.sh b/board/grinn/chiliboard/post-image.sh new file mode 100755 index 000000000..1a076eecb --- /dev/null +++ b/board/grinn/chiliboard/post-image.sh @@ -0,0 +1,14 @@ +#!/usr/bin/env bash + +BOARD_DIR="$(dirname $0)" +GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg" +GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp" + +rm -rf "${GENIMAGE_TMP}" + +genimage \ + --rootpath "${TARGET_DIR}" \ + --tmppath "${GENIMAGE_TMP}" \ + --inputpath "${BINARIES_DIR}" \ + --outputpath "${BINARIES_DIR}" \ + --config "${GENIMAGE_CFG}" diff --git a/board/grinn/chiliboard/readme.txt b/board/grinn/chiliboard/readme.txt new file mode 100644 index 000000000..676aa7040 --- /dev/null +++ b/board/grinn/chiliboard/readme.txt @@ -0,0 +1,46 @@ +********** +chiliBoard +********** + +Build +===== + +First, configure Buildroot for your chiliBoard: + + make grinn_chiliboard_defconfig + +Build image: + + make + +After building you should get a tree like this: + + output/images/ + ├── am335x-chiliboard.dtb + ├── boot.vfat + ├── MLO + ├── rootfs.ext2 + ├── rootfs.ext4 + ├── rootfs.tar + ├── sdcard.img + ├── u-boot.img + └── zImage + +Create a bootable microSD card +============================== + +Buildroot prepares a bootable microSD card image "sdcard.img" in output/images/ +directory, To flash SD card just run the following command: + + sudo dd if=output/images/sdcard.img of=/dev/<sd_card> bs=1M + +where <sd_card> can be sdX or mmcblkX + +*** WARNING! This will destroy all contents of device you specify! *** + +Boot chiliBoard +=============== + +- insert the microSD card in the microSD slot of the board; +- plug micro USB cable to provide power and console interface +- use terminal emulator with 115200 bps, 8n1 |