blob: 6574577dcc0c3546d375a8cda8279fe409991bce (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
|
**************************
Freescale i.MX23 EVK board
**************************
This file documents the Buildroot support for the Freescale i.MX23 EVK board.
Build
=====
First, configure Buildroot for your i.MX23 EVK board:
make imx23evk_defconfig
Build all components:
make
You will find in output/images/ directory the following files:
- imx23-evk.dtb
- rootfs.tar
- u-boot.sd
- zImage
Create a bootable SD card
=========================
To determine the device associated to the SD card have a look in the
/proc/partitions file:
cat /proc/partitions
Then, run the following command:
*** WARNING! The command will destroy all the card content. Use with care! ***
sudo dd if=output/images/sdcard.img of=/dev/<your-microsd-device>
Boot the i.MX23 EVK board
=========================
- Put the Boot Mode Select jumper as 1 0 0 1 so that it can boot
from the SD card
- Insert the SD card in the SD Card slot of the board;
- Connect an RS232 UART cable to the Debug UART Port and connect using a
terminal emulator at 115200 bps, 8n1;
- power on the board.
Enjoy!
|
