tests/kms_universal_plane: Universal plane testing (v6)

Add a simple test to exercise universal plane support.

v6:
 - Update to new universal plane interface (commit parameter rather than
   state-changing function).  It should now be a lot more explicit which
   steps are being taken with legacy API's vs universal API's now.
v5:
 - Check that we don't have more than one primary or cursor.  This will
   catch accidental calls to drm_plane_init() in the kernel where
   drm_universal_plane_init() was intended (these don't cause a compile
   warning due to type compatibility between enum and bool).
v4:
 - Test disabling the primary plane explicitly when it has previously
   been implicitly disabled due to clipping.
 - Skip test if igt_pipe_crc_new() fails
v3:
 - For testing while crtc is off, switch between several different
   primary plane fb's before reenabling the crtc.  This will help
   catch pin/unpin mistakes.
v2:
 - Test that pageflips error out gracefully when the primary plane
   is disabled before the ioctl, or between ioctl and pageflip
   execution.
 - Test that nothing blows up if we try to disable the primary plane
   immediately after a pageflip (presumably before the pageflip actually
   completes).
 - Test that we can setup primary + sprite planes with the CRTC off and
   then have them show up properly when we enable the CRTC
   (drmModeSetCrtc with fb = -1).
 - Test that we can modeset properly after having disabled the primary
   plane
 - Test that proper error codes are returned for invalid plane
   programming attempts.

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>

1 files changed, 577 insertions, 0 deletions

diff --git a/tests/kms_universal_plane.c b/tests/kms_universal_plane.c
new file mode 100644
index 00000000..fe0fde36
--- /dev/null
+++ b/tests/kms_universal_plane.c
@@ -0,0 +1,577 @@
+/*
+ * Copyright © 2014 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ */
+
+#include <errno.h>
+#include <stdbool.h>
+#include <stdio.h>
+#include <string.h>
+
+#include "drmtest.h"
+#include "igt_debugfs.h"
+#include "igt_kms.h"
+
+typedef struct {
+	int drm_fd;
+	igt_display_t display;
+} data_t;
+
+typedef struct {
+	data_t *data;
+	igt_pipe_crc_t *pipe_crc;
+	igt_crc_t crc_1, crc_2, crc_3, crc_4, crc_5, crc_6, crc_7, crc_8,
+		  crc_9, crc_10;
+	struct igt_fb red_fb, blue_fb, black_fb, yellow_fb;
+	drmModeModeInfo *mode;
+} functional_test_t;
+
+typedef struct {
+	data_t *data;
+	drmModeResPtr moderes;
+	struct igt_fb blue_fb, oversized_fb, undersized_fb;
+} sanity_test_t;
+
+typedef struct {
+	data_t *data;
+	struct igt_fb red_fb, blue_fb;
+} pageflip_test_t;
+
+static void
+functional_test_init(functional_test_t *test, igt_output_t *output, enum pipe pipe)
+{
+	data_t *data = test->data;
+	drmModeModeInfo *mode;
+
+	test->pipe_crc = igt_pipe_crc_new(pipe, INTEL_PIPE_CRC_SOURCE_AUTO);
+	if (!test->pipe_crc)
+		igt_skip("auto crc not supported on this connector with pipe %i\n",
+		       pipe);
+
+
+	igt_output_set_pipe(output, pipe);
+
+	mode = igt_output_get_mode(output);
+	igt_create_color_fb(data->drm_fd, mode->hdisplay, mode->vdisplay,
+				DRM_FORMAT_XRGB8888,
+				false, /* tiled */
+				0.0, 0.0, 0.0,
+				&test->black_fb);
+	igt_create_color_fb(data->drm_fd, mode->hdisplay, mode->vdisplay,
+				DRM_FORMAT_XRGB8888,
+				false, /* tiled */
+				0.0, 0.0, 1.0,
+				&test->blue_fb);
+	igt_create_color_fb(data->drm_fd, mode->hdisplay, mode->vdisplay,
+				DRM_FORMAT_XRGB8888,
+				false, /* tiled */
+				1.0, 1.0, 0.0,
+				&test->yellow_fb);
+	igt_create_color_fb(data->drm_fd, 100, 100,
+				DRM_FORMAT_XRGB8888,
+				false, /* tiled */
+				1.0, 0.0, 0.0,
+				&test->red_fb);
+
+	test->mode = mode;
+}
+
+static void
+functional_test_fini(functional_test_t *test, igt_output_t *output)
+{
+	igt_pipe_crc_free(test->pipe_crc);
+
+	igt_remove_fb(test->data->drm_fd, &test->black_fb);
+	igt_remove_fb(test->data->drm_fd, &test->blue_fb);
+	igt_remove_fb(test->data->drm_fd, &test->red_fb);
+	igt_remove_fb(test->data->drm_fd, &test->yellow_fb);
+
+	igt_output_set_pipe(output, PIPE_ANY);
+	igt_display_commit2(&test->data->display, COMMIT_LEGACY);
+}
+
+/*
+ * Universal plane functional testing.
+ *   - Black primary plane via traditional interfaces, red sprite, grab CRC:1.
+ *   - Blue primary plane via traditional interfaces, red sprite, grab CRC:2.
+ *   - Yellow primary via traditional interfaces
+ *   - Blue primary plane, red sprite via universal planes, grab CRC:3 and compare
+ *     with CRC:2 (should be the same)
+ *   - Disable primary plane, grab CRC:4 (should be same as CRC:1)
+ *   - Reenable primary, grab CRC:5 (should be same as CRC:2 and CRC:3)
+ *   - Yellow primary, no sprite
+ *   - Disable CRTC
+ *   - Program red sprite (while CRTC off)
+ *   - Program blue primary (while CRTC off)
+ *   - Enable CRTC, grab CRC:6 (should be same as CRC:2)
+ */
+static void
+functional_test_pipe(data_t *data, enum pipe pipe, igt_output_t *output)
+{
+	functional_test_t test = { .data = data };
+	igt_display_t *display = &data->display;
+	igt_plane_t *primary, *sprite;
+	int ret;
+	int num_primary = 0, num_cursor = 0;
+	int i;
+
+	igt_skip_on(pipe >= display->n_pipes);
+
+	fprintf(stdout, "Testing connector %s using pipe %c\n",
+		igt_output_name(output), pipe_name(pipe));
+
+	functional_test_init(&test, output, pipe);
+
+	/*
+	 * Make sure we have no more than one primary or cursor plane per crtc.
+	 * If the kernel accidentally calls drm_plane_init() rather than
+	 * drm_universal_plane_init(), the type enum can get interpreted as a
+	 * boolean and show up in userspace as the wrong type.
+	 */
+	for (i = 0; i < display->pipes[pipe].n_planes; i++)
+		if (display->pipes[pipe].planes[i].is_primary)
+			num_primary++;
+		else if (display->pipes[pipe].planes[i].is_cursor)
+			num_cursor++;
+
+	igt_assert(num_primary == 1);
+	igt_assert(num_cursor <= 1);
+
+	primary = igt_output_get_plane(output, IGT_PLANE_PRIMARY);
+	sprite = igt_output_get_plane(output, IGT_PLANE_2);
+	if (!sprite) {
+		functional_test_fini(&test, output);
+		igt_skip("No sprite plane available\n");
+	}
+
+	igt_plane_set_position(sprite, 100, 100);
+
+	/* Step 1: Legacy API's, black primary, red sprite (CRC 1) */
+	igt_plane_set_fb(primary, &test.black_fb);
+	igt_plane_set_fb(sprite, &test.red_fb);
+	igt_display_commit2(display, COMMIT_LEGACY);
+	igt_pipe_crc_collect_crc(test.pipe_crc, &test.crc_1);
+
+	/* Step 2: Legacy API', blue primary, red sprite (CRC 2) */
+	igt_plane_set_fb(primary, &test.blue_fb);
+	igt_plane_set_fb(sprite, &test.red_fb);
+	igt_display_commit2(display, COMMIT_LEGACY);
+	igt_pipe_crc_collect_crc(test.pipe_crc, &test.crc_2);
+
+	/* Step 3: Legacy API's, yellow primary (CRC 3) */
+	igt_plane_set_fb(primary, &test.yellow_fb);
+	igt_display_commit2(display, COMMIT_LEGACY);
+	igt_pipe_crc_collect_crc(test.pipe_crc, &test.crc_3);
+
+	/* Step 4: Universal API's, blue primary, red sprite (CRC 4) */
+	igt_plane_set_fb(primary, &test.blue_fb);
+	igt_plane_set_fb(sprite, &test.red_fb);
+	igt_display_commit2(display, COMMIT_UNIVERSAL);
+	igt_pipe_crc_collect_crc(test.pipe_crc, &test.crc_4);
+
+	/* Step 5: Universal API's, disable primary plane (CRC 5) */
+	igt_plane_set_fb(primary, NULL);
+	igt_display_commit2(display, COMMIT_UNIVERSAL);
+	igt_pipe_crc_collect_crc(test.pipe_crc, &test.crc_5);
+
+	/* Step 6: Universal API's, re-enable primary with blue (CRC 6) */
+	igt_plane_set_fb(primary, &test.blue_fb);
+	igt_display_commit2(display, COMMIT_UNIVERSAL);
+	igt_pipe_crc_collect_crc(test.pipe_crc, &test.crc_6);
+
+	/* Step 7: Legacy API's, yellow primary, no sprite */
+	igt_plane_set_fb(primary, &test.yellow_fb);
+	igt_plane_set_fb(sprite, NULL);
+	igt_display_commit2(display, COMMIT_LEGACY);
+
+	/* Step 8: Disable CRTC */
+	igt_plane_set_fb(primary, NULL);
+	igt_display_commit2(display, COMMIT_LEGACY);
+
+	/* Step 9: Universal API's with crtc off:
+	 *  - red sprite
+	 *  - multiple primary fb's, ending in blue
+	 */
+	igt_plane_set_fb(sprite, &test.red_fb);
+	igt_display_commit2(display, COMMIT_UNIVERSAL);
+	igt_plane_set_fb(primary, &test.yellow_fb);
+	igt_display_commit2(display, COMMIT_UNIVERSAL);
+	igt_plane_set_fb(primary, &test.black_fb);
+	igt_display_commit2(display, COMMIT_UNIVERSAL);
+	igt_plane_set_fb(primary, &test.blue_fb);
+	igt_display_commit2(display, COMMIT_UNIVERSAL);
+
+	/* Step 10: Enable crtc (fb = -1), take CRC (CRC 7) */
+	ret = drmModeSetCrtc(data->drm_fd, output->config.crtc->crtc_id, -1,
+			     0, 0, &output->config.connector->connector_id,
+			     1, test.mode);
+	igt_assert(ret == 0);
+	igt_pipe_crc_collect_crc(test.pipe_crc, &test.crc_7);
+
+	/* Step 11: Disable primary plane */
+	igt_plane_set_fb(primary, NULL);
+	igt_display_commit2(display, COMMIT_UNIVERSAL);
+
+	/* Step 12: Legacy modeset to yellow FB (CRC 8) */
+	igt_plane_set_fb(primary, &test.yellow_fb);
+	igt_display_commit2(display, COMMIT_LEGACY);
+	igt_pipe_crc_collect_crc(test.pipe_crc, &test.crc_8);
+
+	/* Step 13: Legacy API', blue primary, red sprite */
+	igt_plane_set_fb(primary, &test.blue_fb);
+	igt_plane_set_fb(sprite, &test.red_fb);
+	igt_display_commit2(display, COMMIT_LEGACY);
+
+	/* Step 14: Universal API, set primary completely offscreen (CRC 9) */
+	ret = drmModeSetPlane(data->drm_fd, primary->drm_plane->plane_id,
+			      output->config.crtc->crtc_id,
+			      test.blue_fb.fb_id, 0,
+			      9000, 9000,
+			      test.mode->hdisplay,
+			      test.mode->vdisplay,
+			      IGT_FIXED(0,0), IGT_FIXED(0,0),
+			      IGT_FIXED(test.mode->hdisplay,0),
+			      IGT_FIXED(test.mode->vdisplay,0));
+	igt_assert(ret == 0);
+	igt_pipe_crc_collect_crc(test.pipe_crc, &test.crc_9);
+
+	/*
+	 * Step 15: Explicitly disable primary after it's already been
+	 * implicitly disabled (CRC 10).
+	 */
+	igt_plane_set_fb(primary, NULL);
+	igt_display_commit2(display, COMMIT_UNIVERSAL);
+	igt_pipe_crc_collect_crc(test.pipe_crc, &test.crc_10);
+
+	/* Step 16: Legacy API's, blue primary, red sprite */
+	igt_plane_set_fb(primary, &test.blue_fb);
+	igt_plane_set_fb(sprite, &test.red_fb);
+	igt_display_commit2(display, COMMIT_LEGACY);
+
+	/* Blue bg + red sprite should be same under both types of API's */
+	igt_assert(igt_crc_equal(&test.crc_2, &test.crc_4));
+
+	/* Disabling primary plane should be same as black primary */
+	igt_assert(igt_crc_equal(&test.crc_1, &test.crc_5));
+
+	/* Re-enabling primary should return to blue properly */
+	igt_assert(igt_crc_equal(&test.crc_2, &test.crc_6));
+
+	/*
+	 * We should be able to setup plane FB's while CRTC is disabled and
+	 * then have them pop up correctly when the CRTC is re-enabled.
+	 */
+	igt_assert(igt_crc_equal(&test.crc_2, &test.crc_7));
+
+	/*
+	 * We should be able to modeset with the primary plane off
+	 * successfully
+	 */
+	igt_assert(igt_crc_equal(&test.crc_3, &test.crc_8));
+
+	/*
+	 * We should be able to move the primary plane completely offscreen
+	 * and have it disable successfully.
+	 */
+	igt_assert(igt_crc_equal(&test.crc_5, &test.crc_9));
+
+	/*
+	 * We should be able to explicitly disable an already
+	 * implicitly-disabled primary plane
+	 */
+	igt_assert(igt_crc_equal(&test.crc_5, &test.crc_10));
+
+	igt_plane_set_fb(primary, NULL);
+	igt_plane_set_fb(sprite, NULL);
+
+	functional_test_fini(&test, output);
+}
+
+static void
+sanity_test_init(sanity_test_t *test, igt_output_t *output, enum pipe pipe)
+{
+	data_t *data = test->data;
+	drmModeModeInfo *mode;
+
+	igt_output_set_pipe(output, pipe);
+
+	mode = igt_output_get_mode(output);
+	igt_create_color_fb(data->drm_fd, mode->hdisplay, mode->vdisplay,
+			    DRM_FORMAT_XRGB8888,
+			    false, /* tiled */
+			    0.0, 0.0, 1.0,
+			    &test->blue_fb);
+	igt_create_color_fb(data->drm_fd,
+			    mode->hdisplay + 100, mode->vdisplay + 100,
+			    DRM_FORMAT_XRGB8888,
+			    false, /* tiled */
+			    0.0, 0.0, 1.0,
+			    &test->oversized_fb);
+	igt_create_color_fb(data->drm_fd,
+			    mode->hdisplay - 100, mode->vdisplay - 100,
+			    DRM_FORMAT_XRGB8888,
+			    false, /* tiled */
+			    0.0, 0.0, 1.0,
+			    &test->undersized_fb);
+
+	test->moderes = drmModeGetResources(data->drm_fd);
+}
+
+static void
+sanity_test_fini(sanity_test_t *test, igt_output_t *output)
+{
+	drmModeFreeResources(test->moderes);
+
+	igt_remove_fb(test->data->drm_fd, &test->oversized_fb);
+	igt_remove_fb(test->data->drm_fd, &test->undersized_fb);
+	igt_remove_fb(test->data->drm_fd, &test->blue_fb);
+
+	igt_output_set_pipe(output, PIPE_ANY);
+	igt_display_commit2(&test->data->display, COMMIT_LEGACY);
+}
+
+/*
+ * Universal plane sanity testing.
+ *   - Primary doesn't cover CRTC
+ *   - Primary plane tries to scale down
+ *   - Primary plane tries to scale up
+ */
+static void
+sanity_test_pipe(data_t *data, enum pipe pipe, igt_output_t *output)
+{
+	sanity_test_t test = { .data = data };
+	igt_plane_t *primary;
+	drmModeModeInfo *mode;
+	int i, ret = 0;
+
+	igt_output_set_pipe(output, pipe);
+	mode = igt_output_get_mode(output);
+
+	sanity_test_init(&test, output, pipe);
+
+	primary = igt_output_get_plane(output, IGT_PLANE_PRIMARY);
+
+	/* Use legacy API to set a mode with a blue FB */
+	igt_plane_set_fb(primary, &test.blue_fb);
+	igt_display_commit2(&data->display, COMMIT_LEGACY);
+
+	/*
+	 * Try to use universal plane API to set primary plane that
+	 * doesn't cover CRTC (should fail).
+	 */
+	igt_plane_set_fb(primary, &test.undersized_fb);
+	ret = igt_display_try_commit2(&data->display, COMMIT_UNIVERSAL);
+	igt_assert(ret == -EINVAL);
+
+	/* Same as above, but different plane positioning. */
+	igt_plane_set_position(primary, 100, 100);
+	ret = igt_display_try_commit2(&data->display, COMMIT_UNIVERSAL);
+	igt_assert(ret == -EINVAL);
+
+	igt_plane_set_position(primary, 0, 0);
+
+	/* Try to use universal plane API to scale down (should fail) */
+	ret = drmModeSetPlane(data->drm_fd, primary->drm_plane->plane_id,
+			      output->config.crtc->crtc_id,
+			      test.oversized_fb.fb_id, 0,
+			      0, 0,
+			      mode->hdisplay + 100,
+			      mode->vdisplay + 100,
+			      IGT_FIXED(0,0), IGT_FIXED(0,0),
+			      IGT_FIXED(mode->hdisplay,0),
+			      IGT_FIXED(mode->vdisplay,0));
+	igt_assert(ret == -ERANGE);
+
+	/* Try to use universal plane API to scale up (should fail) */
+	ret = drmModeSetPlane(data->drm_fd, primary->drm_plane->plane_id,
+			      output->config.crtc->crtc_id,
+			      test.oversized_fb.fb_id, 0,
+			      0, 0,
+			      mode->hdisplay,
+			      mode->vdisplay,
+			      IGT_FIXED(0,0), IGT_FIXED(0,0),
+			      IGT_FIXED(mode->hdisplay - 100,0),
+			      IGT_FIXED(mode->vdisplay - 100,0));
+	igt_assert(ret == -ERANGE);
+
+	/* Find other crtcs and try to program our primary plane on them */
+	for (i = 0; i < test.moderes->count_crtcs; i++)
+		if (test.moderes->crtcs[i] != output->config.crtc->crtc_id) {
+			ret = drmModeSetPlane(data->drm_fd,
+					      primary->drm_plane->plane_id,
+					      test.moderes->crtcs[i],
+					      test.blue_fb.fb_id, 0,
+					      0, 0,
+					      mode->hdisplay,
+					      mode->vdisplay,
+					      IGT_FIXED(0,0), IGT_FIXED(0,0),
+					      IGT_FIXED(mode->hdisplay,0),
+					      IGT_FIXED(mode->vdisplay,0));
+			igt_assert(ret == -EINVAL);
+		}
+
+	igt_plane_set_fb(primary, NULL);
+	sanity_test_fini(&test, output);
+}
+
+static void
+pageflip_test_init(pageflip_test_t *test, igt_output_t *output, enum pipe pipe)
+{
+	data_t *data = test->data;
+	drmModeModeInfo *mode;
+
+	igt_output_set_pipe(output, pipe);
+
+	mode = igt_output_get_mode(output);
+	igt_create_color_fb(data->drm_fd, mode->hdisplay, mode->vdisplay,
+			    DRM_FORMAT_XRGB8888,
+			    false, /* tiled */
+			    1.0, 0.0, 0.0,
+			    &test->red_fb);
+	igt_create_color_fb(data->drm_fd, mode->hdisplay, mode->vdisplay,
+			    DRM_FORMAT_XRGB8888,
+			    false, /* tiled */
+			    0.0, 0.0, 1.0,
+			    &test->blue_fb);
+}
+
+static void
+pageflip_test_fini(pageflip_test_t *test, igt_output_t *output)
+{
+	igt_remove_fb(test->data->drm_fd, &test->red_fb);
+	igt_remove_fb(test->data->drm_fd, &test->blue_fb);
+
+	igt_output_set_pipe(output, PIPE_ANY);
+	igt_display_commit2(&test->data->display, COMMIT_LEGACY);
+}
+
+static void
+pageflip_test_pipe(data_t *data, enum pipe pipe, igt_output_t *output)
+{
+	pageflip_test_t test = { .data = data };
+	igt_plane_t *primary;
+	struct timeval timeout = { .tv_sec = 0, .tv_usec = 500 };
+	drmEventContext evctx = { .version = DRM_EVENT_CONTEXT_VERSION };
+
+	fd_set fds;
+	int ret = 0;
+
+	igt_output_set_pipe(output, pipe);
+
+	pageflip_test_init(&test, output, pipe);
+
+	primary = igt_output_get_plane(output, IGT_PLANE_PRIMARY);
+
+	/* Use legacy API to set a mode with a blue FB */
+	igt_plane_set_fb(primary, &test.blue_fb);
+	igt_display_commit2(&data->display, COMMIT_LEGACY);
+
+	/* Disable the primary plane */
+	igt_plane_set_fb(primary, NULL);
+	igt_display_commit2(&data->display, COMMIT_UNIVERSAL);
+
+	/*
+	 * Issue a pageflip to red FB
+	 *
+	 * Note that crtc->primary->fb = NULL causes flip to return EBUSY for
+	 * historical reasons...
+	 */
+	ret = drmModePageFlip(data->drm_fd, output->config.crtc->crtc_id,
+			      test.red_fb.fb_id, 0, NULL);
+	igt_assert(ret == -EBUSY);
+
+	/* Turn primary plane back on */
+	igt_plane_set_fb(primary, &test.blue_fb);
+	igt_display_commit2(&data->display, COMMIT_UNIVERSAL);
+
+	/*
+	 * Issue a pageflip to red, then immediately try to disable the primary
+	 * plane, hopefully before the pageflip has a chance to complete.  The
+	 * plane disable operation should wind up blocking while the pageflip
+	 * completes, which we don't have a good way to specifically test for,
+	 * but at least we can make sure that nothing blows up.
+	 */
+	ret = drmModePageFlip(data->drm_fd, output->config.crtc->crtc_id,
+			      test.red_fb.fb_id, DRM_MODE_PAGE_FLIP_EVENT,
+			      &test);
+	igt_assert(ret == 0);
+	igt_plane_set_fb(primary, NULL);
+	igt_display_commit2(&data->display, COMMIT_UNIVERSAL);
+
+	/* Wait for pageflip completion, then consume event on fd */
+	FD_ZERO(&fds);
+	FD_SET(data->drm_fd, &fds);
+	do {
+		ret = select(data->drm_fd + 1, &fds, NULL, NULL, &timeout);
+	} while (ret < 0 && errno == EINTR);
+	igt_assert(ret == 1);
+	ret = drmHandleEvent(data->drm_fd, &evctx);
+	igt_assert(ret == 0);
+
+	igt_plane_set_fb(primary, NULL);
+	pageflip_test_fini(&test, output);
+}
+
+static void
+run_tests_for_pipe(data_t *data, enum pipe pipe)
+{
+	igt_output_t *output;
+
+	igt_assert(data->display.has_universal_planes);
+
+	igt_subtest_f("universal-plane-pipe-%c-functional", pipe_name(pipe))
+		for_each_connected_output(&data->display, output)
+			functional_test_pipe(data, pipe, output);
+
+	igt_subtest_f("universal-plane-pipe-%c-sanity", pipe_name(pipe))
+		for_each_connected_output(&data->display, output)
+			sanity_test_pipe(data, pipe, output);
+
+	igt_subtest_f("disable-primary-vs-flip-pipe-%c", pipe_name(pipe))
+		for_each_connected_output(&data->display, output)
+			pageflip_test_pipe(data, pipe, output);
+}
+
+static data_t data;
+
+igt_main
+{
+
+	igt_skip_on_simulation();
+
+	igt_fixture {
+		data.drm_fd = drm_open_any();
+
+		igt_set_vt_graphics_mode();
+
+		igt_require_pipe_crc();
+		igt_display_init(&data.display, data.drm_fd);
+
+		igt_require(data.display.has_universal_planes);
+	}
+
+	for (int pipe = 0; pipe < 3; pipe++)
+		run_tests_for_pipe(&data, pipe);
+
+	igt_fixture {
+		igt_display_fini(&data.display);
+	}
+}