summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorJohannes Berg <johannes@sipsolutions.net>2010-01-29 11:54:56 -0800
committerJohn W. Linville <linville@tuxdriver.com>2010-03-02 14:31:51 -0500
commitb08dfd0435333818a03b38867c556ebcbb3abc02 (patch)
tree578ce4b1dead6f1c605d252955eae26d09d6fabc
parent535765179fd4e8af26b69d2240d7ec33702a370a (diff)
iwlwifi: load firmware asynchronously before mac80211 registrationmaster-2010-03-02
At the wireless summit in Portland we discussed a way of loading firmware asynchronously from ->probe() before registration to mac80211, in order to register with the wireless subsystems with complete information in cases where firmware is required to know parameters. This is not yet the case in iwlwifi, but for some new features we're working on it will be the case since those will only be supported by new firmware images. Hence, to start with, convert iwlwifi to load firmware asynchronously from probe, unbinding the device when firmware loading fails, and only registering with the wireless subsystems after firmware has been loaded successfully. Future patches will hook into this to register the new firmware capabilities, depending on the firmware API version. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-agn.c157
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-dev.h2
2 files changed, 81 insertions, 78 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 6aeb82b6992..47b02147796 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -1463,59 +1463,66 @@ static void iwl_nic_start(struct iwl_priv *priv)
}
+static void iwl_ucode_callback(const struct firmware *ucode_raw, void *context);
+static int iwl_mac_setup_register(struct iwl_priv *priv);
+
+static int __must_check iwl_request_firmware(struct iwl_priv *priv, bool first)
+{
+ const char *name_pre = priv->cfg->fw_name_pre;
+
+ if (first)
+ priv->fw_index = priv->cfg->ucode_api_max;
+ else
+ priv->fw_index--;
+
+ if (priv->fw_index < priv->cfg->ucode_api_min) {
+ IWL_ERR(priv, "no suitable firmware found!\n");
+ return -ENOENT;
+ }
+
+ sprintf(priv->firmware_name, "%s%d%s",
+ name_pre, priv->fw_index, ".ucode");
+
+ IWL_DEBUG_INFO(priv, "attempting to load firmware '%s'\n",
+ priv->firmware_name);
+
+ return request_firmware_nowait(THIS_MODULE, 1, priv->firmware_name,
+ &priv->pci_dev->dev, GFP_KERNEL, priv,
+ iwl_ucode_callback);
+}
+
/**
- * iwl_read_ucode - Read uCode images from disk file.
+ * iwl_ucode_callback - callback when firmware was loaded
*
- * Copy into buffers for card to fetch via bus-mastering
+ * If loaded successfully, copies the firmware into buffers
+ * for the card to fetch (via DMA).
*/
-static int iwl_read_ucode(struct iwl_priv *priv)
+static void iwl_ucode_callback(const struct firmware *ucode_raw, void *context)
{
+ struct iwl_priv *priv = context;
struct iwl_ucode_header *ucode;
- int ret = -EINVAL, index;
- const struct firmware *ucode_raw;
- const char *name_pre = priv->cfg->fw_name_pre;
const unsigned int api_max = priv->cfg->ucode_api_max;
const unsigned int api_min = priv->cfg->ucode_api_min;
- char buf[25];
u8 *src;
size_t len;
u32 api_ver, build;
u32 inst_size, data_size, init_size, init_data_size, boot_size;
+ int err;
u16 eeprom_ver;
- /* Ask kernel firmware_class module to get the boot firmware off disk.
- * request_firmware() is synchronous, file is in memory on return. */
- for (index = api_max; index >= api_min; index--) {
- sprintf(buf, "%s%d%s", name_pre, index, ".ucode");
- ret = request_firmware(&ucode_raw, buf, &priv->pci_dev->dev);
- if (ret < 0) {
- IWL_ERR(priv, "%s firmware file req failed: %d\n",
- buf, ret);
- if (ret == -ENOENT)
- continue;
- else
- goto error;
- } else {
- if (index < api_max)
- IWL_ERR(priv, "Loaded firmware %s, "
- "which is deprecated. "
- "Please use API v%u instead.\n",
- buf, api_max);
-
- IWL_DEBUG_INFO(priv, "Got firmware '%s' file (%zd bytes) from disk\n",
- buf, ucode_raw->size);
- break;
- }
+ if (!ucode_raw) {
+ IWL_ERR(priv, "request for firmware file '%s' failed.\n",
+ priv->firmware_name);
+ goto try_again;
}
- if (ret < 0)
- goto error;
+ IWL_DEBUG_INFO(priv, "Loaded firmware file '%s' (%zd bytes).\n",
+ priv->firmware_name, ucode_raw->size);
/* Make sure that we got at least the v1 header! */
if (ucode_raw->size < priv->cfg->ops->ucode->get_header_size(1)) {
IWL_ERR(priv, "File size way too small!\n");
- ret = -EINVAL;
- goto err_release;
+ goto try_again;
}
/* Data from ucode file: header followed by uCode images */
@@ -1540,10 +1547,9 @@ static int iwl_read_ucode(struct iwl_priv *priv)
IWL_ERR(priv, "Driver unable to support your firmware API. "
"Driver supports v%u, firmware is v%u.\n",
api_max, api_ver);
- priv->ucode_ver = 0;
- ret = -EINVAL;
- goto err_release;
+ goto try_again;
}
+
if (api_ver != api_max)
IWL_ERR(priv, "Firmware has old API version. Expected v%u, "
"got v%u. New firmware can be obtained "
@@ -1585,6 +1591,12 @@ static int iwl_read_ucode(struct iwl_priv *priv)
IWL_DEBUG_INFO(priv, "f/w package hdr boot inst size = %u\n",
boot_size);
+ /*
+ * For any of the failures below (before allocating pci memory)
+ * we will try to load a version with a smaller API -- maybe the
+ * user just got a corrupted version of the latest API.
+ */
+
/* Verify size of file vs. image size info in file's header */
if (ucode_raw->size !=
priv->cfg->ops->ucode->get_header_size(api_ver) +
@@ -1594,41 +1606,35 @@ static int iwl_read_ucode(struct iwl_priv *priv)
IWL_DEBUG_INFO(priv,
"uCode file size %d does not match expected size\n",
(int)ucode_raw->size);
- ret = -EINVAL;
- goto err_release;
+ goto try_again;
}
/* Verify that uCode images will fit in card's SRAM */
if (inst_size > priv->hw_params.max_inst_size) {
IWL_DEBUG_INFO(priv, "uCode instr len %d too large to fit in\n",
inst_size);
- ret = -EINVAL;
- goto err_release;
+ goto try_again;
}
if (data_size > priv->hw_params.max_data_size) {
IWL_DEBUG_INFO(priv, "uCode data len %d too large to fit in\n",
data_size);
- ret = -EINVAL;
- goto err_release;
+ goto try_again;
}
if (init_size > priv->hw_params.max_inst_size) {
IWL_INFO(priv, "uCode init instr len %d too large to fit in\n",
init_size);
- ret = -EINVAL;
- goto err_release;
+ goto try_again;
}
if (init_data_size > priv->hw_params.max_data_size) {
IWL_INFO(priv, "uCode init data len %d too large to fit in\n",
init_data_size);
- ret = -EINVAL;
- goto err_release;
+ goto try_again;
}
if (boot_size > priv->hw_params.max_bsm_size) {
IWL_INFO(priv, "uCode boot instr len %d too large to fit in\n",
boot_size);
- ret = -EINVAL;
- goto err_release;
+ goto try_again;
}
/* Allocate ucode buffers for card's bus-master loading ... */
@@ -1712,20 +1718,36 @@ static int iwl_read_ucode(struct iwl_priv *priv)
IWL_DEBUG_INFO(priv, "Copying (but not loading) boot instr len %Zd\n", len);
memcpy(priv->ucode_boot.v_addr, src, len);
+ /**************************************************
+ * This is still part of probe() in a sense...
+ *
+ * 9. Setup and register with mac80211 and debugfs
+ **************************************************/
+ err = iwl_mac_setup_register(priv);
+ if (err)
+ goto out_unbind;
+
+ err = iwl_dbgfs_register(priv, DRV_NAME);
+ if (err)
+ IWL_ERR(priv, "failed to create debugfs files. Ignoring error: %d\n", err);
+
/* We have our copies now, allow OS release its copies */
release_firmware(ucode_raw);
- return 0;
+ return;
+
+ try_again:
+ /* try next, if any */
+ if (iwl_request_firmware(priv, false))
+ goto out_unbind;
+ release_firmware(ucode_raw);
+ return;
err_pci_alloc:
IWL_ERR(priv, "failed to allocate pci memory\n");
- ret = -ENOMEM;
iwl_dealloc_ucode_pci(priv);
-
- err_release:
+ out_unbind:
+ device_release_driver(&priv->pci_dev->dev);
release_firmware(ucode_raw);
-
- error:
- return ret;
}
static const char *desc_lookup_text[] = {
@@ -2667,21 +2689,7 @@ static int iwl_mac_start(struct ieee80211_hw *hw)
/* we should be verifying the device is ready to be opened */
mutex_lock(&priv->mutex);
-
- /* fetch ucode file from disk, alloc and copy to bus-master buffers ...
- * ucode filename and max sizes are card-specific. */
-
- if (!priv->ucode_code.len) {
- ret = iwl_read_ucode(priv);
- if (ret) {
- IWL_ERR(priv, "Could not read microcode: %d\n", ret);
- mutex_unlock(&priv->mutex);
- return ret;
- }
- }
-
ret = __iwl_up(priv);
-
mutex_unlock(&priv->mutex);
if (ret)
@@ -3654,17 +3662,10 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
iwl_power_initialize(priv);
iwl_tt_initialize(priv);
- /**************************************************
- * 9. Setup and register with mac80211 and debugfs
- **************************************************/
- err = iwl_mac_setup_register(priv);
+ err = iwl_request_firmware(priv, true);
if (err)
goto out_remove_sysfs;
- err = iwl_dbgfs_register(priv, DRV_NAME);
- if (err)
- IWL_ERR(priv, "failed to create debugfs files. Ignoring error: %d\n", err);
-
return 0;
out_remove_sysfs:
diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h
index ab891b95804..6054c5fba0c 100644
--- a/drivers/net/wireless/iwlwifi/iwl-dev.h
+++ b/drivers/net/wireless/iwlwifi/iwl-dev.h
@@ -1132,6 +1132,7 @@ struct iwl_priv {
u8 rev_id;
/* uCode images, save to reload in case of failure */
+ int fw_index; /* firmware we're trying to load */
u32 ucode_ver; /* version of ucode, copy of
iwl_ucode.ver */
struct fw_desc ucode_code; /* runtime inst */
@@ -1142,6 +1143,7 @@ struct iwl_priv {
struct fw_desc ucode_boot; /* bootstrap inst */
enum ucode_type ucode_type;
u8 ucode_write_complete; /* the image write is complete */
+ char firmware_name[25];
struct iwl_rxon_time_cmd rxon_timing;