summaryrefslogtreecommitdiff
path: root/drivers/media/rc/ene_ir.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/rc/ene_ir.c')
-rw-r--r--drivers/media/rc/ene_ir.c23
1 files changed, 14 insertions, 9 deletions
diff --git a/drivers/media/rc/ene_ir.c b/drivers/media/rc/ene_ir.c
index 80b3c319f69..1ac49139158 100644
--- a/drivers/media/rc/ene_ir.c
+++ b/drivers/media/rc/ene_ir.c
@@ -446,27 +446,27 @@ static void ene_rx_setup(struct ene_device *dev)
select_timeout:
if (dev->rx_fan_input_inuse) {
- dev->rdev->rx_resolution = MS_TO_NS(ENE_FW_SAMPLE_PERIOD_FAN);
+ dev->rdev->rx_resolution = US_TO_NS(ENE_FW_SAMPLE_PERIOD_FAN);
/* Fan input doesn't support timeouts, it just ends the
input with a maximum sample */
dev->rdev->min_timeout = dev->rdev->max_timeout =
- MS_TO_NS(ENE_FW_SMPL_BUF_FAN_MSK *
+ US_TO_NS(ENE_FW_SMPL_BUF_FAN_MSK *
ENE_FW_SAMPLE_PERIOD_FAN);
} else {
- dev->rdev->rx_resolution = MS_TO_NS(sample_period);
+ dev->rdev->rx_resolution = US_TO_NS(sample_period);
/* Theoreticly timeout is unlimited, but we cap it
* because it was seen that on one device, it
* would stop sending spaces after around 250 msec.
* Besides, this is close to 2^32 anyway and timeout is u32.
*/
- dev->rdev->min_timeout = MS_TO_NS(127 * sample_period);
- dev->rdev->max_timeout = MS_TO_NS(200000);
+ dev->rdev->min_timeout = US_TO_NS(127 * sample_period);
+ dev->rdev->max_timeout = US_TO_NS(200000);
}
if (dev->hw_learning_and_tx_capable)
- dev->rdev->tx_resolution = MS_TO_NS(sample_period);
+ dev->rdev->tx_resolution = US_TO_NS(sample_period);
if (dev->rdev->timeout > dev->rdev->max_timeout)
dev->rdev->timeout = dev->rdev->max_timeout;
@@ -801,7 +801,7 @@ static irqreturn_t ene_isr(int irq, void *data)
dbg("RX: %d (%s)", hw_sample, pulse ? "pulse" : "space");
- ev.duration = MS_TO_NS(hw_sample);
+ ev.duration = US_TO_NS(hw_sample);
ev.pulse = pulse;
ir_raw_event_store_with_filter(dev->rdev, &ev);
}
@@ -821,7 +821,7 @@ static void ene_setup_default_settings(struct ene_device *dev)
dev->learning_mode_enabled = learning_mode_force;
/* Set reasonable default timeout */
- dev->rdev->timeout = MS_TO_NS(150000);
+ dev->rdev->timeout = US_TO_NS(150000);
}
/* Upload all hardware settings at once. Used at load and resume time */
@@ -1004,6 +1004,10 @@ static int ene_probe(struct pnp_dev *pnp_dev, const struct pnp_device_id *id)
/* validate resources */
error = -ENODEV;
+ /* init these to -1, as 0 is valid for both */
+ dev->hw_io = -1;
+ dev->irq = -1;
+
if (!pnp_port_valid(pnp_dev, 0) ||
pnp_port_len(pnp_dev, 0) < ENE_IO_SIZE)
goto error;
@@ -1072,6 +1076,8 @@ static int ene_probe(struct pnp_dev *pnp_dev, const struct pnp_device_id *id)
rdev->input_name = "ENE eHome Infrared Remote Transceiver";
}
+ dev->rdev = rdev;
+
ene_rx_setup_hw_buffer(dev);
ene_setup_default_settings(dev);
ene_setup_hw_settings(dev);
@@ -1083,7 +1089,6 @@ static int ene_probe(struct pnp_dev *pnp_dev, const struct pnp_device_id *id)
if (error < 0)
goto error;
- dev->rdev = rdev;
ene_notice("driver has been succesfully loaded");
return 0;
error: