diff options
Diffstat (limited to 'drivers/net/wireless/bcmdhd/include/wlc_extlog_idstr.h')
| -rw-r--r-- | drivers/net/wireless/bcmdhd/include/wlc_extlog_idstr.h | 117 |
1 files changed, 117 insertions, 0 deletions
diff --git a/drivers/net/wireless/bcmdhd/include/wlc_extlog_idstr.h b/drivers/net/wireless/bcmdhd/include/wlc_extlog_idstr.h new file mode 100644 index 00000000000..95f616a5fc7 --- /dev/null +++ b/drivers/net/wireless/bcmdhd/include/wlc_extlog_idstr.h @@ -0,0 +1,117 @@ +/* + * EXTLOG Module log ID to log Format String mapping table + * + * Copyright (C) 2012, Broadcom Corporation + * All Rights Reserved. + * + * This is UNPUBLISHED PROPRIETARY SOURCE CODE of Broadcom Corporation; + * the contents of this file may not be disclosed to third parties, copied + * or duplicated in any form, in whole or in part, without the prior + * written permission of Broadcom Corporation. + * + * $Id: wlc_extlog_idstr.h 241182 2011-02-17 21:50:03Z $ + */ +#ifndef _WLC_EXTLOG_IDSTR_H_ +#define _WLC_EXTLOG_IDSTR_H_ + +#include "wlioctl.h" + +/* Strings corresponding to the IDs defined in wlioctl.h + * This file is only included by the apps and not included by the external driver + * Formats of pre-existing ids should NOT be changed + */ +log_idstr_t extlog_fmt_str[ ] = { + {FMTSTR_DRIVER_UP_ID, 0, LOG_ARGTYPE_NULL, + "Driver is Up\n"}, + + {FMTSTR_DRIVER_DOWN_ID, 0, LOG_ARGTYPE_NULL, + "Driver is Down\n"}, + + {FMTSTR_SUSPEND_MAC_FAIL_ID, 0, LOG_ARGTYPE_INT, + "wlc_suspend_mac_and_wait() failed with psmdebug 0x%08x\n"}, + + {FMTSTR_NO_PROGRESS_ID, 0, LOG_ARGTYPE_INT, + "No Progress on TX for %d seconds\n"}, + + {FMTSTR_RFDISABLE_ID, 0, LOG_ARGTYPE_INT, + "Detected a change in RF Disable Input 0x%x\n"}, + + {FMTSTR_REG_PRINT_ID, 0, LOG_ARGTYPE_STR_INT, + "Register %s = 0x%x\n"}, + + {FMTSTR_EXPTIME_ID, FMTSTRF_USER, LOG_ARGTYPE_NULL, + "Strong RF interference detected\n"}, + + {FMTSTR_JOIN_START_ID, FMTSTRF_USER, LOG_ARGTYPE_STR, + "Searching for networks with ssid %s\n"}, + + {FMTSTR_JOIN_COMPLETE_ID, FMTSTRF_USER, LOG_ARGTYPE_STR, + "Successfully joined network with BSSID %s\n"}, + + {FMTSTR_NO_NETWORKS_ID, FMTSTRF_USER, LOG_ARGTYPE_NULL, + "No networks found. Please check if the network exists and is in range\n"}, + + {FMTSTR_SECURITY_MISMATCH_ID, FMTSTRF_USER, LOG_ARGTYPE_NULL, + "AP rejected due to security mismatch. Change the security settings and try again...\n"}, + + {FMTSTR_RATE_MISMATCH_ID, FMTSTRF_USER, LOG_ARGTYPE_NULL, + "AP rejected due to rate mismatch\n"}, + + {FMTSTR_AP_PRUNED_ID, 0, LOG_ARGTYPE_INT, + "AP rejected due to reason %d\n"}, + + {FMTSTR_KEY_INSERTED_ID, 0, LOG_ARGTYPE_INT, + "Inserting keys for algorithm %d\n"}, + + {FMTSTR_DEAUTH_ID, FMTSTRF_USER, LOG_ARGTYPE_STR_INT, + "Received Deauth from %s with Reason %d\n"}, + + {FMTSTR_DISASSOC_ID, FMTSTRF_USER, LOG_ARGTYPE_STR_INT, + "Received Disassoc from %s with Reason %d\n"}, + + {FMTSTR_LINK_UP_ID, FMTSTRF_USER, LOG_ARGTYPE_NULL, + "Link Up\n"}, + + {FMTSTR_LINK_DOWN_ID, FMTSTRF_USER, LOG_ARGTYPE_NULL, + "Link Down\n"}, + + {FMTSTR_RADIO_HW_OFF_ID, FMTSTRF_USER, LOG_ARGTYPE_NULL, + "Radio button is turned OFF. Please turn it on...\n"}, + + {FMTSTR_RADIO_HW_ON_ID, FMTSTRF_USER, LOG_ARGTYPE_NULL, + "Hardware Radio button is turned ON\n"}, + + {FMTSTR_EVENT_DESC_ID, 0, LOG_ARGTYPE_INT_STR, + "Generated event id %d: (result status) is (%s)\n"}, + + {FMTSTR_PNP_SET_POWER_ID, 0, LOG_ARGTYPE_INT, + "Device going into power state %d\n"}, + + {FMTSTR_RADIO_SW_OFF_ID, FMTSTRF_USER, LOG_ARGTYPE_NULL, + "Software Radio is disabled. Please enable it through the UI...\n"}, + + {FMTSTR_RADIO_SW_ON_ID, FMTSTRF_USER, LOG_ARGTYPE_NULL, + "Software Radio is enabled\n"}, + + {FMTSTR_PWD_MISMATCH_ID, FMTSTRF_USER, LOG_ARGTYPE_NULL, + "Potential passphrase mismatch. Please try a different one...\n"}, + + {FMTSTR_FATAL_ERROR_ID, 0, LOG_ARGTYPE_INT, + "Fatal Error: intstatus 0x%x\n"}, + + {FMTSTR_AUTH_FAIL_ID, 0, LOG_ARGTYPE_STR_INT, + "Authentication to %s Failed with status %d\n"}, + + {FMTSTR_ASSOC_FAIL_ID, 0, LOG_ARGTYPE_STR_INT, + "Association to %s Failed with status %d\n"}, + + {FMTSTR_IBSS_FAIL_ID, FMTSTRF_USER, LOG_ARGTYPE_NULL, + "Unable to start IBSS since PeerNet is already active\n"}, + + {FMTSTR_EXTAP_FAIL_ID, FMTSTRF_USER, LOG_ARGTYPE_NULL, + "Unable to start Ext-AP since PeerNet is already active\n"}, + + {FMTSTR_MAX_ID, 0, 0, "\0"} +}; + +#endif /* _WLC_EXTLOG_IDSTR_H_ */ |