diff options
Diffstat (limited to 'drivers/usb/serial/ftdi_sio.c')
| -rw-r--r-- | drivers/usb/serial/ftdi_sio.c | 19 |
1 files changed, 16 insertions, 3 deletions
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 5fc13e71791..bbd2cdd669a 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -207,6 +207,8 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_XF_640_PID) }, { USB_DEVICE(FTDI_VID, FTDI_XF_642_PID) }, { USB_DEVICE(FTDI_VID, FTDI_DSS20_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_URBAN_0_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_URBAN_1_PID) }, { USB_DEVICE(FTDI_NF_RIC_VID, FTDI_NF_RIC_PID) }, { USB_DEVICE(FTDI_VID, FTDI_VNHCPCUSB_D_PID) }, { USB_DEVICE(FTDI_VID, FTDI_MTXORB_0_PID) }, @@ -733,6 +735,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(TML_VID, TML_USB_SERIAL_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELSTER_UNICOM_PID) }, { USB_DEVICE(FTDI_VID, FTDI_PROPOX_JTAGCABLEII_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_PROPOX_ISPCABLEIII_PID) }, { USB_DEVICE(OLIMEX_VID, OLIMEX_ARM_USB_OCD_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(OLIMEX_VID, OLIMEX_ARM_USB_OCD_H_PID), @@ -745,6 +748,8 @@ static struct usb_device_id id_table_combined [] = { .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(FTDI_VID, LMI_LM3S_EVAL_BOARD_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(FTDI_VID, LMI_LM3S_ICDI_BOARD_PID), + .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(FTDI_VID, FTDI_TURTELIZER_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) }, @@ -2079,13 +2084,19 @@ static void ftdi_set_termios(struct tty_struct *tty, cflag = termios->c_cflag; - /* FIXME -For this cut I don't care if the line is really changing or - not - so just do the change regardless - should be able to - compare old_termios and tty->termios */ + if (old_termios->c_cflag == termios->c_cflag + && old_termios->c_ispeed == termios->c_ispeed + && old_termios->c_ospeed == termios->c_ospeed) + goto no_c_cflag_changes; + /* NOTE These routines can get interrupted by ftdi_sio_read_bulk_callback - need to examine what this means - don't see any problems yet */ + if ((old_termios->c_cflag & (CSIZE|PARODD|PARENB|CMSPAR|CSTOPB)) == + (termios->c_cflag & (CSIZE|PARODD|PARENB|CMSPAR|CSTOPB))) + goto no_data_parity_stop_changes; + /* Set number of data bits, parity, stop bits */ urb_value = 0; @@ -2126,6 +2137,7 @@ static void ftdi_set_termios(struct tty_struct *tty, } /* Now do the baudrate */ +no_data_parity_stop_changes: if ((cflag & CBAUD) == B0) { /* Disable flow control */ if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0), @@ -2153,6 +2165,7 @@ static void ftdi_set_termios(struct tty_struct *tty, /* Set flow control */ /* Note device also supports DTR/CD (ugh) and Xon/Xoff in hardware */ +no_c_cflag_changes: if (cflag & CRTSCTS) { dbg("%s Setting to CRTSCTS flow control", __func__); if (usb_control_msg(dev, |