summaryrefslogtreecommitdiff
path: root/drivers/s390/kvm
AgeCommit message (Collapse)Author
2012-03-11[S390] irq: external interrupt code passingHeiko Carstens
The external interrupt handlers have a parameter called ext_int_code. Besides the name this paramter does not only contain the ext_int_code but in addition also the "cpu address" (POP) which caused the external interrupt. To make the code a bit more obvious pass a struct instead so the called function can easily distinguish between external interrupt code and cpu address. The cpu address field however is named "subcode" since some external interrupt sources do not pass a cpu address but a different parameter (or none at all). Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-01-12virtio: harsher barriers for rpmsg.Rusty Russell
We were cheating with our barriers; using the smp ones rather than the real device ones. That was fine, until rpmsg came along, which is used to talk to a real device (a non-SMP CPU). Unfortunately, just putting back the real barriers (reverting d57ed95d) causes a performance regression on virtio-pci. In particular, Amos reports netbench's TCP_RR over virtio_net CPU utilization increased up to 35% while throughput went down by up to 14%. By comparison, this branch is in the noise. Reference: https://lkml.org/lkml/2011/12/11/22 Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-11-16enable virtio_net to return bus_info in ethtool -i consistent with emulated NICsRick Jones
Add a new .bus_name to virtio_config_ops then modify virtio_net to call through to it in an ethtool .get_drvinfo routine to report bus_info in ethtool -i output which is consistent with other emulated NICs and the output of lspci. Signed-off-by: Rick Jones <rick.jones2@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-06Merge branch 'modsplit-Oct31_2011' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux * 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits) Revert "tracing: Include module.h in define_trace.h" irq: don't put module.h into irq.h for tracking irqgen modules. bluetooth: macroize two small inlines to avoid module.h ip_vs.h: fix implicit use of module_get/module_put from module.h nf_conntrack.h: fix up fallout from implicit moduleparam.h presence include: replace linux/module.h with "struct module" wherever possible include: convert various register fcns to macros to avoid include chaining crypto.h: remove unused crypto_tfm_alg_modname() inline uwb.h: fix implicit use of asm/page.h for PAGE_SIZE pm_runtime.h: explicitly requires notifier.h linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h miscdevice.h: fix up implicit use of lists and types stop_machine.h: fix implicit use of smp.h for smp_processor_id of: fix implicit use of errno.h in include/linux/of.h of_platform.h: delete needless include <linux/module.h> acpi: remove module.h include from platform/aclinux.h miscdevice.h: delete unnecessary inclusion of module.h device_cgroup.h: delete needless include <linux/module.h> net: sch_generic remove redundant use of <linux/module.h> net: inet_timewait_sock doesnt need <linux/module.h> ... Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in - drivers/media/dvb/frontends/dibx000_common.c - drivers/media/video/{mt9m111.c,ov6650.c} - drivers/mfd/ab3550-core.c - include/linux/dmaengine.h
2011-10-31s390: add missing module.h/export.h includesHeiko Carstens
Fix several compile errors on s390 caused by splitting module.h. Some include additions [e.g. qdio_setup.c, zfcp_qdio.c] are in anticipation of pending changes queued for s390 that increase the modular use footprint. [PG: added additional obvious changes since Heiko's original patch] Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-30[S390] sparse: fix sparse symbol shadow warningMartin Schwidefsky
to_kvmdev and dev_to_virtio both use container_of. Avoid to nest the two macros to quiet the following sparse warning: drivers/s390/kvm/kvm_virtio.c:337:20: warning: symbol '__mptr' shadows an earlier one drivers/s390/kvm/kvm_virtio.c:337:20: originally declared here Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30[S390] sparse: fix sparse static warningsMartin Schwidefsky
Make functions and data static to avoid sparse warnings. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-05-26[S390] irq: merge irq.c and s390_ext.cHeiko Carstens
Merge irq.c and s390_ext.c into irq.c. That way all external interrupt related functions are together. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-05-26[S390] irq: fix service signal external interrupt handlingHeiko Carstens
Interrupt sources like pfault, sclp, dasd_diag and virtio all use the service signal external interrupt subclass mask in control register 0 to enable and disable the corresponding interrupt. Because no reference counting is implemented each subsystem thinks it is the only user of subclass and sets and clears the bit like it wants. This leads to case that unloading the dasd diag module under z/VM causes both sclp and pfault interrupts to be masked. The result will be locked up system sooner or later. Fix this by introducing a new way to set (register) and clear (unregister) the service signal subclass mask bit in cr0. Also convert all drivers. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-04-29[S390] irqstats: fix counting of pfault, dasd diag and virtio irqsHeiko Carstens
pfault, dasd diag and virtio all use the same external interrupt number. The respective interrupt handlers decide by the subcode if they are meant to handle the interrupt. Counting is currently done before looking at the subcode which means each handler counts an interrupt even if it is not handling it. Fix this by moving the kstat code after the code which looks at the subcode. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-01-05[S390] irq: have detailed statistics for interrupt typesHeiko Carstens
Up to now /proc/interrupts only has statistics for external and i/o interrupts but doesn't split up them any further. This patch adds a line for every single interrupt source so that it is possible to easier tell what the machine is/was doing. Part of the output now looks like this; CPU0 CPU2 CPU4 EXT: 3898 4232 2305 I/O: 782 315 245 CLK: 1029 1964 727 [EXT] Clock Comparator IPI: 2868 2267 1577 [EXT] Signal Processor TMR: 0 0 0 [EXT] CPU Timer TAL: 0 0 0 [EXT] Timing Alert PFL: 0 0 0 [EXT] Pseudo Page Fault [...] NMI: 0 1 1 [NMI] Machine Checks Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] cleanup lowcore access from external interruptsMartin Schwidefsky
Read external interrupts parameters from the lowcore in the first level interrupt handler in entry[64].S. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-24KVM: S390: Add virtio hotplug add supportAlexander Graf
The one big missing feature in s390-virtio was hotplugging. This is no more. This patch implements hotplug add support, so you can on the fly add new devices in the guest. Keep in mind that this needs a patch for qemu to actually leverage the functionality. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24KVM: S390: take a full byte as ext_param indicatorAlexander Graf
Currenty the ext_param field only distinguishes between "config change" and "vring interrupt". We can do a lot more with it though, so let's enable a full byte of possible values and constants to #defines while at it. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-02-26[S390] Cleanup struct _lowcore usage and defines.Heiko Carstens
Use asm offsets to make sure the offset defines to struct _lowcore and its layout don't get out of sync. Also add a BUILD_BUG_ON() which checks that the size of the structure is sane. And while being at it change those sites which use odd casts to access the current lowcore. These should use S390_lowcore instead. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-11[S390] kvm: use console_initcall() to initialize s390 virtio consoleHendrik Brueckner
Use a console_initcall() to initialize the s390 virtio console and clean up s390 console initialization in setup.c. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-12virtio: find_vqs/del_vqs virtio operationsMichael S. Tsirkin
This replaces find_vq/del_vq with find_vqs/del_vqs virtio operations, and updates all drivers. This is needed for MSI support, because MSI needs to know the total number of vectors upfront. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (+ lguest/9p compile fixes)
2009-06-12virtio: add names to virtqueue struct, mapping from devices to queues.Rusty Russell
Add a linked list of all virtqueues for a virtio device: this helps for debugging and is also needed for upcoming interface change. Also, add a "name" field for clearer debug messages. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-01-06s390: remove s390_root_dev_*()Mark McLoughlin
Replace s390_root_dev_register() with root_device_register() etc. [Includes fix from Cornelia Huck] Signed-off-by: Mark McLoughlin <markmc@redhat.com> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-30kvm-s390: implement config_changed for virtio on s390Christian Borntraeger
This patch implements config_changed for the s390 virtio transport. We use the least significant bit of the interrupt parameter field to decide, if this interrupt should call the virtio virtqueue callback or the config_changed callback. This method is compatible with old host and guest code. Old 64 bit guests will not check the bit and trigger a harmless additional vring_interrupt call. Old host code will never set this bit, this is also safe. This patch also takes care of a potential future 31 bit virtio transport for s390. On 31 bit _LC_PFAULT_INTPARM and __LC_EXT_PARAMS are identical. We exploit the alignment of the token and fold the change bit into the lsb of the token itself. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-12-30virtio: hand virtio ring alignment as argument to vring_new_virtqueueRusty Russell
This allows each virtio user to hand in the alignment appropriate to their virtio_ring structures. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
2008-12-30virtio: use KVM_S390_VIRTIO_RING_ALIGN instead of relying on pagesizeRusty Russell
This doesn't really matter, since s390 pagesize is 4k anyway. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
2008-11-14[S390] kvm_s390: Fix oops in virtio device detection with "mem="Christian Borntraeger
The current virtio model on s390 has the descriptor page above the main memory. The guest virtio detection will oops if the mem= parameter is used to reduce/change the memory size. We have to use real_memory_size instead of max_pfn to detect the virtio descriptor pages. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2008-10-10[S390] Use s390_root_dev_* in kvm_virtio.Cornelia Huck
No need to define a static device for the kvm_s390 root device, just use s390_root_dev_register(). This is needed for the bus_id rework Acked-by: Carsten Otte <cotte@de.ibm.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-08-01[S390] virtio console: fix section mismatch warning.Heiko Carstens
Fix these two false positive warnings: WARNING: vmlinux.o(.text+0x2e1cc4): Section mismatch in reference from the function s390_virtio_console_init() to the function .init.text:early_put_chars() The function s390_virtio_console_init() references the function __init early_put_chars(). This is often because s390_virtio_console_init lacks a __init annotation or the annotation of early_put_chars is wrong. WARNING: vmlinux.o(.text+0x2e1cd0): Section mismatch in reference from the function s390_virtio_console_init() to the function .init.text:virtio_cons_early_init() The function s390_virtio_console_init() references the function __init virtio_cons_early_init(). This is often because s390_virtio_console_init lacks a __init annotation or the annotation of virtio_cons_early_init is wrong. Cc: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-07-27KVM: s390: Fix guest kconfigChristian Borntraeger
Cornelia Huck noticed that a modular virtio without kvm guest support leads to a build error in the s390 virtio transport: CONFIG_VIRTIO=m leads to ERROR: "vmem_add_mapping" [drivers/s390/kvm/kvm_virtio.ko] undefined! ERROR: "max_pfn" [drivers/s390/kvm/kvm_virtio.ko] undefined! ERROR: "vmem_remove_mapping" [drivers/s390/kvm/kvm_virtio.ko] undefined! The virtio transport only works with kvm guest support and only as a builtin. Lets change the build process of drivers/s390/kvm/kvm_virtio.c to depend on kvm guest support, which is also a bool. CONFIG_S390_GUEST already selects CONFIG_VIRTIO, that should prevent CONFIG_S390_GUEST=y CONFIG_VIRTIO=n situations. CC: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-25virtio: Add transport feature handling stub for virtio_ring.Rusty Russell
To prepare for virtio_ring transport feature bits, hook in a call in all the users to manipulate them. This currently just clears all the bits, since it doesn't understand any features. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-07-25virtio: Rename set_features to finalize_featuresRusty Russell
Rather than explicitly handing the features to the lower-level, we just hand the virtio_device and have it set the features. This make it clear that it has the chance to manipulate the features of the device at this point (and that all feature negotiation is already done). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-07-25s390: use virtio_console for KVM on s390Christian Borntraeger
This patch enables virtio_console as the default console on kvm for s390. We currently use the same notify hack as lguest for early console output. I will try to address this for lguest and s390 later. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-05-30virtio: set device index in common code.Rusty Russell
Anthony Liguori points out that three different transports use the virtio code, but each one keeps its own counter to set the virtio_device's index field. In theory (though not in current practice) this means that names could be duplicated, and that risk grows as more transports are created. So we move the selection of the unique virtio_device.index into the common code in virtio.c, which has the side-benefit of removing duplicate code. The only complexity is that lguest and S/390 use the index to uniquely identify the device in case of catastrophic failure before register_virtio_device() is called: now we use the offset within the descriptor page as a unique identifier for the printks. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Carsten Otte <cotte@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Chris Lalancette <clalance@redhat.com> Cc: Anthony Liguori <anthony@codemonkey.ws>
2008-05-18s390: KVM guest: fix compile errorHeiko Carstens
Fix kvm compile error: Commit c45a6816c19dee67b8f725e6646d428901a6dc24 (virtio: explicit advertisement of driver features) and commit e976a2b997fc4ad70ccc53acfe62811c4aaec851 (s390: KVM guest: virtio device support, and kvm hypercalls) don't like each other: CC drivers/s390/kvm/kvm_virtio.o drivers/s390/kvm/kvm_virtio.c:224: error: unknown field 'feature' specified in initializer drivers/s390/kvm/kvm_virtio.c:224: warning: initialization from incompatible pointer type make[3]: *** [drivers/s390/kvm/kvm_virtio.o] Error 1 Cc: Adrian Bunk <bunk@kernel.org> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-30[S390] Convert to SPARSEMEM & SPARSEMEM_VMEMMAPHeiko Carstens
Convert s390 to SPARSEMEM and SPARSEMEM_VMEMMAP. We do a select of SPARSEMEM_VMEMMAP since it is configurable. This is because SPARSEMEM without SPARSEMEM_VMEMMAP gives us a hell of broken include dependencies that I don't want to fix. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-04-27s390: KVM guest: virtio device support, and kvm hypercallsChristian Borntraeger
This patch implements kvm guest kernel support for paravirtualized devices and contains two parts: o a basic virtio stub using virtio_ring and external interrupts and hypercalls o full hypercall implementation in kvm_para.h Currently we dont have PCI on s390. Making virtio_pci usable for s390 seems more complicated that providing an own stub. This virtio stub is similar to the lguest one, the memory for the descriptors and the device detection is made via additional mapped memory on top of the guest storage. We use an external interrupt with extint code 0x2603 for host->guest notification. The hypercall definition uses the diag instruction for issuing a hypercall. The parameters are written in R2-R7, the hypercall number is written in R1. This is similar to the system call ABI (svc) which can use R1 for the number and R2-R6 for the parameters. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>