summaryrefslogtreecommitdiff
path: root/net/tipc
AgeCommit message (Collapse)Author
2012-02-29tipc: Optimize setting of immutable payload message header fieldsAllan Stephens
Optimizes routines that send payload messages so that they no longer update the "originating node" and "originating port" fields of the outgoing message header template, since these fields are initialized when the sending port is created and never change thereafter. Also optimizes the routine which updates the message header template when a connection to a port is established, for the same reason. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-29tipc: Eliminate obsolete code for re-sending a messageAllan Stephens
Removes code that updated the "previous node" field of an out-going message over TIPC's links. Such updating is unnecessary since the removal of the prototype multi-cluster capability means that all outgoing messages are generated locally and already have this field populated correctly. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-29tipc: Un-inline port routine for processing incoming messagesAllan Stephens
Converts a non-trivial routine from inline to non-inline form to avoid bloating the TIPC code base with 6 copies of its body. This change is essentially cosmetic, and doesn't change existing TIPC behavior. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-24tipc: Eliminate support for tipc_mode global variableAllan Stephens
Removes all references to the global variable that records whether TIPC is running in "single node" mode or "network" mode, since this information can be easily deduced from the global variable that records TIPC's network address. (i.e. a non-zero network address means that TIPC is running in network mode.) The changes made update most existing mode-based checks to use the network address global variable. A few checks that are no longer needed are removed entirely, along with any associated code lying on non-executable control paths. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-24tipc: Eliminate obsolete support for "not running" modeAllan Stephens
Removes all references to TIPC's "not running" mode, since the removal of support for the native API means that there is no longer any way to interact with TIPC if it has not been initialized. The changes made consist of removing mode-based checks that are no longer needed, along with any associated code lying on non-executable control paths. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-24tipc: Revert name table translation optimizationAllan Stephens
Restores name table translation using a non-zero domain that is "out of scope", which was broken by an earlier commit (5d9c54c1e9ececcf7e99c4f014f9bec7ee3a7def). Comments have now been added to the name table translation routine to make it clear that there are actually three possible outcomes to a translation request (found/not found/deferred), rather than just two (found/not found). Note that a straightforward revert of the earlier commit is not possible, as other changes to the name table translation logic have occurred since the incorrect optimization was made. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-24tipc: Minor optimization to broadcast link synchronization logicAllan Stephens
Optimizes processing done when contact with a neighboring node is established to avoid recording the current state of outgoing broadcast messages if the neighboring node isn't a valid broadcast link destination, since this state information isn't needed for such nodes. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-24tipc: Remove obsolete comments about routing table updatesAllan Stephens
Eliminates a block of comments that describe how routing table updates are to be handled. These comments no longer apply following the removal of TIPC's prototype multi-cluster support. Note that these changes are essentially cosmetic in nature, and have no impact on the actual operation of TIPC. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-24tipc: Eliminate trivial buffer manipulation helper routinesAllan Stephens
Gets rid of two inlined routines that simply call existing sk_buff manipulation routines, since there is no longer any extra processing done by the helper routines. Note that these changes are essentially cosmetic in nature, and have no impact on the actual operation of TIPC. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-24tipc: Hide internal details of node table implementationAllan Stephens
Relocates information about the size of TIPC's node table index and its associated hash function, since only node subsystem routines need to have access to this information. Note that these changes are essentially cosmetic in nature, and have no impact on the actual operation of TIPC. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-24tipc: Eliminate a test for negative unsigned quantitiesAllan Stephens
Simplifies a comparison operation to eliminate a useless test that checks if an unsigned value is less than zero. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-24tipc: nuke the delimit static inline function.Paul Gortmaker
This "shortform" is actually longer than typing out what it is really trying to do, and just makes reading the code more difficult, so lets simply shoot it in the head. In the case of log.c - the comparison is on a u32, so we can drop the check for < 0 at the same time. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-24tipc: Add check to prevent insertion of duplicate name table entriesAllan Stephens
Adds a new check to TIPC's name table logic to reject any attempt to create a new name publication that is identical to an existing one. (Such an attempt will never happen under normal circumstances, but could arise if another network node malfunctions and issues a duplicate name publication message.) Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-24tipc: Simplify enforcement of reserved name type prohibitionAllan Stephens
Streamlines the logic that prevents an application from binding a reserved TIPC name type to a port by moving the check to the code that handles a socket bind() operation. This allows internal TIPC subsystems to bind a reserved name without having to set an atomic flag to gain permission to use such a name. (This simplification is now possible due to the elimination of support for TIPC's native API.) Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-24tipc: Remove duplicate check of message destination nodeAllan Stephens
Eliminates a check in the processing of TIPC messages arriving from off node that ensures the message is destined for this node, since this check duplicates an earlier check. (The check would be necessary if TIPC needed to be able to route incoming messages to another node, but the elimination of multi-cluster support means that this never happens and all incoming messages are consumed by the receiving node.) Note: This change involves the elimination of a single "if" statement with a large "then" clause; consequently, a significant number of lines end up getting re-indented. In addition, a simple message header access routine that is no longer referenced is eliminated. However, the only functional change is the elimination of the single check described above. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-24tipc: Detect duplicate nodes using different network interfacesAllan Stephens
Utilizes the new "node signature" field in neighbor discovery messages to ensure that all links TIPC associates with a given <Z.C.N> network address belong to the same neighboring node. (Previously, TIPC could not tell if link setup requests arriving on different interfaces were from the same node or from two different nodes that has mistakenly been assigned the same network address.) The revised algorithm for detecting a duplicate node considers both the node signature and the network interface adddress specified in a request message when deciding how to respond to a link setup request. This prevents false alarms that might otherwise arise during normal network operation under the following scenarios: a) A neighboring node reboots. (The node's signature changes, but the network interface address remains unchanged.) b) A neighboring node's network interface is replaced. (The node's signature remains unchanged, but the network interface address changes.) c) A neighboring node is completely replaced. (The node's signature and network interface address both change.) The algorithm also handles cases in which a node reboots and re-establishes its links to TIPC (or begins re-establishing those links) before TIPC detects that it is using a new node signature. In such cases of "delayed rediscovery" TIPC simply accepts the new signature without disrupting communication that is already underway over the links. Thanks to Laser [gotolaser@gmail.com] for his contributions to the development of this enhancement. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-24tipc: Introduce node signature field in neighbor discovery messageAllan Stephens
Adds support for the new "node signature" in neighbor discovery messages, which is a 16 bit identifier chosen randomly when TIPC is initialized. This field makes it possible for nodes receiving a neighbor discovery message to detect if multiple neighboring nodes are using the same network address (i.e. <Z.C.N>), even when the messages are arriving on different interfaces. This first phase of node signature support creates the signature, incorporates it into outgoing neighbor discovery messages, and tracks the signature used by valid neighbors. An upcoming patch builds on this foundation to implement the improved duplicate neighbor detection checking. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-06tipc: Minor optimization to rejection of connection-based messagesAllan Stephens
Modifies message rejection logic so that TIPC doesn't attempt to send a FIN message to the rejecting port if it is known in advance that there is no such message because the rejecting port doesn't exist. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-06tipc: Eliminate alteration of publication key during name table purgingAllan Stephens
Removes code that alters the publication key of a name table entry that is being forcibly purged from TIPC's name table after contact with the publishing node has been lost. Current TIPC ensures that all defunct names are purged before re-establishing contact with a failed node. There used to be a risk that the publication might be accidentally deleted because it might be re-added to the name table before the purge operation was completed. But now there is no longer a need to ensure that the new key is different than the old one. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-06tipc: Prevent loss of fragmented messages over broadcast linkAllan Stephens
Modifies broadcast link so that an incoming fragmented message is not lost if reassembly cannot begin because there currently is no buffer big enough to hold the entire reassembled message. The broadcast link now ignores the first fragment completely, which causes the sending node to retransmit the first fragment so that reassembly can be re-attempted. Previously, the sender would have had no reason to retransmit the 1st fragment, so we would never have a chance to re-try the allocation. To do this cleanly without duplicaton, a new bclink_accept_pkt() function is introduced. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-06tipc: Prevent loss of fragmented messages over unicast linksAllan Stephens
Modifies unicast link endpoint logic so an incoming fragmented message is not lost if reassembly cannot begin because there is no buffer big enough to hold the entire reassembled message. The link endpoint now ignores the first fragment completely, which causes the sending node to retransmit the first fragment so that reassembly can be re-attempted. Previously, the sender would have had no reason to retransmit the 1st fragment, so we would never have a chance to re-try the allocation. Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
2012-02-06tipc: Remove obsolete broadcast tag capabilityAllan Stephens
Eliminates support for the broadcast tag field, which is no longer used by broadcast link NACK messages. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-06tipc: Major redesign of broadcast link ACK/NACK algorithmsAllan Stephens
Completely redesigns broadcast link ACK and NACK mechanisms to prevent spurious retransmit requests in dual LAN networks, and to prevent the broadcast link from stalling due to the failure of a receiving node to acknowledge receiving a broadcast message or request its retransmission. Note: These changes only impact the timing of when ACK and NACK messages are sent, and not the basic broadcast link protocol itself, so inter- operability with nodes using the "classic" algorithms is maintained. The revised algorithms are as follows: 1) An explicit ACK message is still sent after receiving 16 in-sequence messages, and implicit ACK information continues to be carried in other unicast link message headers (including link state messages). However, the timing of explicit ACKs is now based on the receiving node's absolute network address rather than its relative network address to ensure that the failure of another node does not delay the ACK beyond its 16 message target. 2) A NACK message is now typically sent only when a message gap persists for two consecutive incoming link state messages; this ensures that a suspected gap is not confirmed until both LANs in a dual LAN network have had an opportunity to deliver the message, thereby preventing spurious NACKs. A NACK message can also be generated by the arrival of a single link state message, if the deferred queue is so big that the current message gap cannot be the result of "normal" mis-ordering due to the use of dual LANs (or one LAN using a bonded interface). Since link state messages typically arrive at different nodes at different times the problem of multiple nodes issuing identical NACKs simultaneously is inherently avoided. 3) Nodes continue to "peek" at NACK messages sent by other nodes. If another node requests retransmission of a message gap suspected (but not yet confirmed) by the peeking node, the peeking node forgets about the gap and does not generate a duplicate retransmit request. (If the peeking node subsequently fails to receive the lost message, later link state messages will cause it to rediscover and confirm the gap and send another NACK.) 4) Message gap "equality" is now determined by the start of the gap only. This is sufficient to deal with the most common cases of message loss, and eliminates the need for complex end of gap computations. 5) A peeking node no longer tries to determine whether it should send a complementary NACK, since the most common cases of message loss don't require it to be sent. Consequently, the node no longer examines the "broadcast tag" field of a NACK message when peeking. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-06tipc: Add missing locks in broadcast link statistics accumulationAllan Stephens
Ensures that all attempts to update broadcast link statistics are done only while holding the lock that protects the link's main data structures, to prevent interference by simultaneous updates caused by messages arriving on other interfaces. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-06tipc: Fix bug in broadcast link duplicate message statisticsAllan Stephens
Modifies broadcast link so that it increments the "received duplicate message" count if an incoming message cannot be added to the deferred message queue because it is already present in the queue. (The aligns broadcast link behavior with that of TIPC's unicast links.) Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-06tipc: Fix node lock reclamation issues in broadcast link receptionAllan Stephens
Fixes a pair of problems in broadcast link message reception code relating to the reclamation of the node lock after consuming an in-sequence message. 1) Now retests to see if the sending node is still up after reclaiming the node lock, and bails out if it is non-operational. 2) Now manipulates the node's deferred message queue only after reclaiming the node lock, rather than using queue head pointer information that was cached previously. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-06tipc: Add missing broadcast link lock when sending NACKAllan Stephens
Ensures that any attempt to send a NACK message over TIPC's broadcast link has exclusive access to the link's main data structures, to prevent interference with a simultaneous attempt to send other broadcast link traffic (such as application-generated multicast messages). Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-06tipc: Fix problem with broadcast link synchronization between nodesAllan Stephens
Corrects a problem in which a link endpoint that activates as the result of receiving a RESET/STATE sequence of link protocol messages fails to properly record the broadcast link status information about the node to which it is now communicating with. (The problem does not occur with the more common RESET/ACTIVATE sequence of messages.) The fix ensures that the broadcast link status info is updated after the RESET message resets the link endpoint, rather than before, thereby preventing new information from being overwritten by the reset operation. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-06tipc: Ensure broadcast link re-acquires node after link failureAllan Stephens
Fix a bug that can prevent TIPC from sending broadcast messages to a node if contact with the node is lost and then regained. The problem occurs if the broadcast link first clears the flag indicating the node is part of the link's distribution set (when it loses contact with the node), and later fails to restore the flag (when contact is regained); restoration fails if contact with the node is regained by implicit unicast link activation triggered by the arrival of a data message, rather than explicitly by the arrival of a link activation message. The broadcast link now uses separate fields to track whether a node is theoretically capable of receiving broadcast messages versus whether it is actually part of the link's distribution set. The former member is updated by the receipt of link protocol messages, which can occur at any time; the latter member is updated only when contact with the node is gained or lost. This change also permits the simplification of several conditional expressions since the broadcast link's "supported" field can now only be set if there are working links to the associated node. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-06tipc: Prevent broadcast link stalling in dual LAN environmentsAllan Stephens
Ensure that sequence number information about incoming broadcast link messages is initialized only by the activation of the first link to a given cluster node. Previously, a race condition allowed reset and/or activation messages for a second link to re-initialize this sequence number information with obsolete values. This could trigger TIPC to request the retransmission of previously acknowledged broadcast link messages from that node, resulting in broadcast link processing becoming stalled if the node had already released one or more of those messages and was unable to perform the required retransmission. Thanks to Laser <gotolaser@gmail.com> for identifying this problem and assisting in the development of this fix. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-06tipc: Prevent transmission of outdated link protocol messagesAllan Stephens
Ensures that a link endpoint discards any previously deferred link protocol message whenever it attempts to send a new one. Previously, it was possible for a link protocol message that was unsent due to congestion to be transmitted after newer protocol messages had been sent. The stale link protocol message might then cause the receiving link endpoint to malfunction because of its outdated conent. Thanks to Osamu Kaminuma [okaminum@avaya.com] for diagnosing the problem and contributing a prototype patch. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-06tipc: improve the link deferred queue insertion algorithmAllan Stephens
Re-code the algorithm for inserting an out-of-sequence message into a unicast or broadcast link's deferred message queue. It remains functionally equivalent but should be easier to understand/maintain. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-12-29tipc: rename struct bearer_name to struct tipc_bearer_namesPaul Gortmaker
The addition of the "s" to indicate pluralization is intentional, since the struct actually contains two name variants. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-12-29tipc: rename struct link* to struct tipc_link*Paul Gortmaker
This converts the following: struct link -> struct tipc_link struct link_req -> struct tipc_link_req struct link_name -> struct tipc_link_name Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-12-29tipc: rename struct bcbearer* to tipc_bcbearer*Paul Gortmaker
This changes both the struct bcbearer and struct bcbearer_pair to have the "tipc_" prefix. Runtime behaviour is unchanged. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-12-29tipc: rename struct bclink to struct tipc_bclinkPaul Gortmaker
Make this rename so that it is consistent with the majority of the other tipc structs and to assist in removing any ambiguity with other similar names in other subsystems. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-12-29tipc: rename struct subscriber to struct tipc_subscriberPaul Gortmaker
Make this rename so that it is consistent with the majority of the other tipc structs and to assist in removing any ambiguity with other similar names in other subsystems. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-12-29tipc: rename struct subscription to struct tipc_subscriptionPaul Gortmaker
Make this rename so that it is consistent with the majority of the other tipc structs and to assist in removing any ambiguity with other similar names in other subsystems. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-12-29tipc: rename struct port_list to struct tipc_port_listPaul Gortmaker
Make this rename so that it is consistent with the majority of the other tipc structs and to assist in removing any ambiguity with other similar names in other subsystems. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-12-29tipc: rename struct media to struct tipc_mediaPaul Gortmaker
Give it a meaningful prefix, as suggested by DaveM, so that it is consistent with things like struct tipc_bearer, and so it isn't confused with anything else. This has no impact on the actual runtime code behaviour. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-12-27tipc: Allow use of buf_seqno() helper routine by unicast linksAllan Stephens
Migrates the buf_seqno() helper routine from broadcast link level to unicast link level so that it can be used both types of TIPC links. This is a cosmetic change only, and does not affect the operation of TIPC. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-12-27tipc: Ignore broadcast acknowledgements that are out-of-rangeAllan Stephens
Adds checks to TIPC's broadcast link so that it ignores any acknowledgement message containing a sequence number that does not correspond to an unacknowledged message currently in the broadcast link's transmit queue. This change prevents the broadcast link from becoming stalled if a newly booted node receives stale broadcast link acknowledgement information from another node that has not yet fully synchronized its end of the broadcast link to reflect the current state of the new node's end. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-12-27tipc: Flush unsent broadcast messages when contact with last node is lostAllan Stephens
Adds code to release any unsent broadcast messages in the broadcast link transmit queue if TIPC loses contact with its only neighboring node. Previously, a broadcast link that was in the congested state would hold on to the unsent messages, even though the messages were now undeliverable. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-12-27tipc: Minor optimization of broadcast link transmit queue statisticAllan Stephens
The two broadcast link statistics fields that are used to derive the average length of that link's transmit queue are now updated only after a successful attempt to send a broadcast message, since there is no need to update these values when an unsuccessful send attempt leaves the queue unchanged. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-12-27tipc: Handle broadcast attempt when no neighboring nodes existAllan Stephens
Adds a check to detect when an attempt is made to send a message via the broadcast link and no neighboring nodes are currently available to receive it. Rather than wasting effort passing the message to the broadcast link and broadcast bearer, who will only throw it away, TIPC now frees the message immediately and reports success (i.e. the message has been delivered to all available destinations). Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-12-27tipc: Ensure broadcast link spinlock is held when updating node mapAllan Stephens
Fixes oversight that allowed broadcast link node map to be updated without first taking the broadcast link spinlock that protects the map. As part of this fix the node map has been incorporated into the broadcast link structure to make the need for such protection more evident. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-12-27tipc: Eliminate dynamic allocation of broadcast link data structuresAllan Stephens
Creates global variables to hold the broadcast link's pseudo-bearer and pseudo-link structures, rather than allocating them dynamically. There is only a single instance of each structure, and changing over to static allocation allows elimination of code to handle the cases where dynamic allocation was unsuccessful. The memset in the teardown code may look like they aren't used, but the same teardown code is run when there is a non-fatal error at init-time, so that stale data isn't present when the user fixes the cause of the soft error. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-12-27tipc: Eliminate useless check when network address is assignedAllan Stephens
Gets rid of an unnecessary check in the routine that updates the port id of a node's name publications when the node is assigned a network address, since the routine is only invoked if the new address is different from the existing one. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-12-27tipc: Minor correction to TIPC module unloadingAllan Stephens
Modifies TIPC's module unloading logic to switch itself into "single node" mode before starting to terminate networking support. This helps to ensure that no operations that require TIPC to be in "networking" mode can initiate once unloading starts. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-12-27tipc: Eliminate useless memset operations in Ethernet media supportAllan Stephens
Gets rid of two pointless operations that zero out the array used to record information about TIPC's Ethernet bearers. There is no need to initialize the array on start up since it is a global variable that is already zero'd out, and there is no need to zero it out on exit because the array is never referenced again. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>