ARM: ux500: regulators: add mask for configuration

There is already a register mask in the regulator driver
to allow some bits of a register to be initialized. The register
value is defined in the board configuration. This patch puts a
mask in the board configuration to specify which bits should
actually be altered. The purpose with this patch is to avoid
future mistakes when updating the allowed bits in the regulator
driver.

Change-Id: I55c531c9258854dbaf9c4ecb5786ca5d7bfdfcf2
Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32096
Tested-by: Jonas ABERG <jonas.aberg@stericsson.com>

1 files changed, 34 insertions, 33 deletions

diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c
index f1375e092b4..65afa0f76d0 100644
--- a/arch/arm/mach-ux500/board-mop500-regulators.c
+++ b/arch/arm/mach-ux500/board-mop500-regulators.c
@@ -91,21 +91,22 @@ struct ab8500_regulator_reg_init
 ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = {
 	/*
 	 * VanaRequestCtrl          = HP/LP depending on VxRequest
+	 * VpllRequestCtrl          = HP/LP depending on VxRequest
 	 * VextSupply1RequestCtrl   = HP/LP depending on VxRequest
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL2, 0x00),
+	INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL2,       0xfc, 0x00),
 	/*
 	 * VextSupply2RequestCtrl   = HP/LP depending on VxRequest
 	 * VextSupply3RequestCtrl   = HP/LP depending on VxRequest
 	 * Vaux1RequestCtrl         = HP/LP depending on VxRequest
 	 * Vaux2RequestCtrl         = HP/LP depending on VxRequest
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL3, 0x00),
+	INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL3,       0xff, 0x00),
 	/*
 	 * Vaux3RequestCtrl         = HP/LP depending on VxRequest
 	 * SwHPReq                  = Control through SWValid disabled
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL4, 0x00),
+	INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL4,       0x07, 0x00),
 	/*
 	 * Vsmps1SysClkReq1HPValid  = enabled
 	 * Vsmps2SysClkReq1HPValid  = enabled
@@ -116,44 +117,44 @@ ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = {
 	 * Vaux2SysClkReq1HPValid   = disabled
 	 * Vaux3SysClkReq1HPValid   = disabled
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID1, 0x17),
+	INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID1, 0xff, 0x17),
 	/*
 	 * VextSupply1SysClkReq1HPValid = disabled
 	 * VextSupply2SysClkReq1HPValid = disabled
 	 * VextSupply3SysClkReq1HPValid = SysClkReq1 controlled
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID2, 0x40),
+	INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID2, 0x70, 0x40),
 	/*
 	 * VanaHwHPReq1Valid        = disabled
 	 * Vaux1HwHPreq1Valid       = disabled
 	 * Vaux2HwHPReq1Valid       = disabled
 	 * Vaux3HwHPReqValid        = disabled
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID1, 0x00),
+	INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID1,     0xe8, 0x00),
 	/*
 	 * VextSupply1HwHPReq1Valid = disabled
 	 * VextSupply2HwHPReq1Valid = disabled
 	 * VextSupply3HwHPReq1Valid = disabled
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID2, 0x00),
+	INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID2,     0x07, 0x00),
 	/*
 	 * VanaHwHPReq2Valid        = disabled
 	 * Vaux1HwHPReq2Valid       = disabled
 	 * Vaux2HwHPReq2Valid       = disabled
 	 * Vaux3HwHPReq2Valid       = disabled
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID1, 0x00),
+	INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID1,     0xe8, 0x00),
 	/*
 	 * VextSupply1HwHPReq2Valid = disabled
 	 * VextSupply2HwHPReq2Valid = disabled
 	 * VextSupply3HwHPReq2Valid = HWReq2 controlled
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID2, 0x04),
+	INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID2,     0x07, 0x04),
 	/*
 	 * VanaSwHPReqValid         = disabled
 	 * Vaux1SwHPReqValid        = disabled
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID1, 0x00),
+	INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID1,      0xa0, 0x00),
 	/*
 	 * Vaux2SwHPReqValid        = disabled
 	 * Vaux3SwHPReqValid        = disabled
@@ -161,7 +162,7 @@ ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = {
 	 * VextSupply2SwHPReqValid  = disabled
 	 * VextSupply3SwHPReqValid  = disabled
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID2, 0x00),
+	INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID2,      0x1f, 0x00),
 	/*
 	 * SysClkReq2Valid1         = SysClkReq2 controlled
 	 * SysClkReq3Valid1         = disabled
@@ -171,7 +172,7 @@ ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = {
 	 * SysClkReq7Valid1         = disabled
 	 * SysClkReq8Valid1         = disabled
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID1, 0x2a),
+	INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID1,    0xfe, 0x2a),
 	/*
 	 * SysClkReq2Valid2         = disabled
 	 * SysClkReq3Valid2         = disabled
@@ -181,7 +182,7 @@ ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = {
 	 * SysClkReq7Valid2         = disabled
 	 * SysClkReq8Valid2         = disabled
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID2, 0x20),
+	INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID2,    0xfe, 0x20),
 	/*
 	 * VTVoutEna                = disabled
 	 * Vintcore12Ena            = disabled
@@ -189,55 +190,55 @@ ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = {
 	 * Vintcore12LP             = inactive (HP)
 	 * VTVoutLP                 = inactive (HP)
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUMISC1, 0x10),
+	INIT_REGULATOR_REGISTER(AB8500_REGUMISC1,              0xfe, 0x10),
 	/*
 	 * VaudioEna                = disabled
 	 * VdmicEna                 = disabled
 	 * Vamic1Ena                = disabled
 	 * Vamic2Ena                = disabled
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_VAUDIOSUPPLY, 0x00),
+	INIT_REGULATOR_REGISTER(AB8500_VAUDIOSUPPLY,           0x1e, 0x00),
 	/*
 	 * Vamic1_dzout             = high-Z when Vamic1 is disabled
 	 * Vamic2_dzout             = high-Z when Vamic2 is disabled
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUCTRL1VAMIC, 0x00),
+	INIT_REGULATOR_REGISTER(AB8500_REGUCTRL1VAMIC,         0x03, 0x00),
 	/*
 	 * Vsmps1Regu               = HW control
 	 * Vsmps1SelCtrl            = Vsmps1 voltage defined by Vsmsp1Sel2
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_VSMPS1REGU, 0x06),
+	INIT_REGULATOR_REGISTER(AB8500_VSMPS1REGU,             0x0f, 0x06),
 	/*
 	 * Vsmps2Regu               = HW control
 	 * Vsmps2SelCtrl            = Vsmps2 voltage defined by Vsmsp2Sel2
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_VSMPS2REGU, 0x06),
+	INIT_REGULATOR_REGISTER(AB8500_VSMPS2REGU,             0x0f, 0x06),
 	/*
 	 * Vsmps3Sel2               = 1.2125 V
 	 * NOTE! PRCMU register
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_VSMPS3SEL2, 0x29),
+	INIT_REGULATOR_REGISTER(AB8500_VSMPS3SEL2,             0x7f, 0x29),
 	/*
 	 * Vsmps3Regu               = HW control
 	 * Vsmps3SelCtrl            = Vsmps3 voltage defined by Vsmps3Sel2
 	 * NOTE! PRCMU register
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_VSMPS3REGU, 0x06),
+	INIT_REGULATOR_REGISTER(AB8500_VSMPS3REGU,             0x0f, 0x06),
 	/*
 	 * Vsmps3Sel1               = 0.925V
 	 * NOTE! PRCMU register
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_VSMPS3SEL1, 0x12),
+	INIT_REGULATOR_REGISTER(AB8500_VSMPS3SEL1,             0x7f, 0x12),
 	/*
 	 * VPll                     = Hw controlled
 	 * VanaRegu                 = force off
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_VPLLVANAREGU, 0x02),
+	INIT_REGULATOR_REGISTER(AB8500_VPLLVANAREGU,           0x0f, 0x02),
 	/*
 	 * VrefDDREna               = disabled
 	 * VrefDDRSleepMode         = inactive (no pulldown)
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_VREFDDR, 0x00),
+	INIT_REGULATOR_REGISTER(AB8500_VREFDDR,                0x03, 0x00),
 	/*
 	 * VextSupply1Regu          = HW control
 	 * VextSupply2Regu          = HW control
@@ -245,36 +246,36 @@ ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = {
 	 * ExtSupply2Bypass         = ExtSupply12LPn ball is 0 when Ena is 0
 	 * ExtSupply3Bypass         = ExtSupply3LPn ball is 0 when Ena is 0
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_EXTSUPPLYREGU, 0x2a),
+	INIT_REGULATOR_REGISTER(AB8500_EXTSUPPLYREGU,          0xff, 0x2a),
 	/*
 	 * Vaux1Regu                = force HP
 	 * Vaux2Regu                = force off
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_VAUX12REGU, 0x01),
+	INIT_REGULATOR_REGISTER(AB8500_VAUX12REGU,             0x0f, 0x01),
 	/*
 	 * Vaux3regu                = force off
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3REGU, 0x00),
+	INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3REGU,          0x0f, 0x00),
 	/*
 	 * Vsmps1Sel1               = 1.2 V
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_VSMPS1SEL1, 0x28),
+	INIT_REGULATOR_REGISTER(AB8500_VSMPS1SEL1,             0x3f, 0x28),
 	/*
 	 * Vaux1Sel                 = 2.5 V
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_VAUX1SEL, 0x08),
+	INIT_REGULATOR_REGISTER(AB8500_VAUX1SEL,               0x0f, 0x08),
 	/*
 	 * Vaux2Sel                 = 2.9 V
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_VAUX2SEL, 0x0d),
+	INIT_REGULATOR_REGISTER(AB8500_VAUX2SEL,               0x0f, 0x0d),
 	/*
 	 * Vaux3Sel                 = 2.91 V
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3SEL, 0x07),
+	INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3SEL,           0x07, 0x07),
 	/*
 	 * VextSupply12LP           = disabled (no LP)
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUCTRL2SPARE, 0x00),
+	INIT_REGULATOR_REGISTER(AB8500_REGUCTRL2SPARE,         0x01, 0x00),
 	/*
 	 * Vaux1Disch               = short discharge time
 	 * Vaux2Disch               = short discharge time
@@ -283,13 +284,13 @@ ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = {
 	 * VTVoutDisch              = short discharge time
 	 * VaudioDisch              = short discharge time
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH, 0x00),
+	INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH,          0xfc, 0x00),
 	/*
 	 * VanaDisch                = short discharge time
 	 * VdmicPullDownEna         = pulldown disabled when Vdmic is disabled
 	 * VdmicDisch               = short discharge time
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH2, 0x00),
+	INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH2,         0x16, 0x00),
 };
 
 /* AB8500 regulators */