at91: add support for the PM9261 board of Ronetix GmbH

The PM9261 board is based on the AT91SAM9261-EK board.

Here is the page on Ronetix website:
http://www.ronetix.at/starter_kit_9261.html

Signed-off-by: Ilko Iliev <iliev@ronetix.at>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

10 files changed, 1087 insertions, 0 deletions

diff --git a/MAINTAINERS b/MAINTAINERS
index 9379c7e0c..b5b54849e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -209,6 +209,7 @@ Klaus Heydeck <heydeck@kieback-peter.de>
 
 Ilko Iliev <iliev@ronetix.at>
 
+	PM9261		AT91SAM9261
 	PM9263		AT91SAM9263
 
 Gary Jennejohn <garyj@denx.de>
diff --git a/MAKEALL b/MAKEALL
index f4599d6f3..fb80cfa8a 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -589,6 +589,7 @@ LIST_at91="		\
 	kb9202		\
 	mp2usb		\
 	m501sk		\
+	pm9261		\
 	pm9263		\
 "
 
diff --git a/Makefile b/Makefile
index bcc81c935..eb58dfea0 100644
--- a/Makefile
+++ b/Makefile
@@ -2782,6 +2782,9 @@ at91sam9rlek_config	:	unconfig
 	fi;
 	@$(MKCONFIG) -a at91sam9rlek arm arm926ejs at91sam9rlek atmel at91
 
+pm9261_config	:	unconfig
+	@$(MKCONFIG) $(@:_config=) arm arm926ejs pm9261 ronetix at91
+
 pm9263_config	:	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm926ejs pm9263 ronetix at91
 
diff --git a/board/ronetix/pm9261/Makefile b/board/ronetix/pm9261/Makefile
new file mode 100644
index 000000000..1db9de2f8
--- /dev/null
+++ b/board/ronetix/pm9261/Makefile
@@ -0,0 +1,61 @@
+#
+# (C) Copyright 2003-2008
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2008
+# Stelian Pop <stelian.pop@leadtechdesign.com>
+# Lead Tech Design <www.leadtechdesign.com>
+# Ilko Iliev <www.ronetix.at>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS-y += $(BOARD).o
+COBJS-y += led.o
+COBJS-$(CONFIG_HAS_DATAFLASH) += partition.o
+
+ifndef CONFIG_SKIP_LOWLEVEL_INIT
+SOBJS-y	:= lowlevel_init.o
+endif
+
+SRCS	:= $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS-y) $(SOBJS-y))
+SOBJS	:= $(addprefix $(obj),$(SOBJS-y))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/ronetix/pm9261/config.mk b/board/ronetix/pm9261/config.mk
new file mode 100644
index 000000000..71854192f
--- /dev/null
+++ b/board/ronetix/pm9261/config.mk
@@ -0,0 +1 @@
+TEXT_BASE = 0x23f00000
\ No newline at end of file
diff --git a/board/ronetix/pm9261/led.c b/board/ronetix/pm9261/led.c
new file mode 100644
index 000000000..396c3e734
--- /dev/null
+++ b/board/ronetix/pm9261/led.c
@@ -0,0 +1,44 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ * Ilko Iliev <www.ronetix.at>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/at91sam9261.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
+
+void coloured_LED_init(void)
+{
+	/* Enable clock */
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_PIOC);
+
+	at91_set_gpio_output(CONFIG_RED_LED, 1);
+	at91_set_gpio_output(CONFIG_GREEN_LED, 1);
+	at91_set_gpio_output(CONFIG_YELLOW_LED, 1);
+
+	at91_set_gpio_value(CONFIG_RED_LED, 0);
+	at91_set_gpio_value(CONFIG_GREEN_LED, 1);
+	at91_set_gpio_value(CONFIG_YELLOW_LED, 1);
+}
diff --git a/board/ronetix/pm9261/lowlevel_init.S b/board/ronetix/pm9261/lowlevel_init.S
new file mode 100644
index 000000000..5880a84ca
--- /dev/null
+++ b/board/ronetix/pm9261/lowlevel_init.S
@@ -0,0 +1,259 @@
+/*
+ * Memory Setup stuff - taken from blob memsetup.S
+ *
+ * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and
+ *		       Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl)
+ *
+ * Copyright (C) 2008 Ronetix Ilko Iliev (www.ronetix.at)
+ * Copyright (C) 2009 Jean-Christopher PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_pio.h>
+#include <asm/arch/at91_rstc.h>
+#include <asm/arch/at91_wdt.h>
+#include <asm/arch/at91sam9_sdramc.h>
+#include <asm/arch/at91sam9_smc.h>
+#include <asm/arch/at91sam9261_matrix.h>
+
+_TEXT_BASE:
+	.word	TEXT_BASE
+
+.globl lowlevel_init
+.type lowlevel_init,function
+lowlevel_init:
+
+	mov	r5, pc		/* r5 = POS1 + 4 current */
+POS1:
+	ldr	r0, =POS1	/* r0 = POS1 compile */
+	ldr	r2, _TEXT_BASE
+	sub	r0, r0, r2	/* r0 = POS1-_TEXT_BASE (POS1 relative) */
+	sub	r5, r5, r0	/* r0 = TEXT_BASE-1 */
+	sub	r5, r5, #4	/* r1 = text base - current */
+
+	/* memory control configuration 1 */
+	ldr	r0, =SMRDATA
+	ldr	r2, =SMRDATA1
+	ldr	r1, _TEXT_BASE
+	sub	r0, r0, r1
+	sub	r2, r2, r1
+	add	r0, r0, r5
+	add	r2, r2, r5
+0:
+	/* the address */
+	ldr	r1, [r0], #4
+	/* the value */
+	ldr	r3, [r0], #4
+	str	r3, [r1]
+	cmp	r2, r0
+	bne	0b
+
+/* ----------------------------------------------------------------------------
+ * PMC Init Step 1.
+ * ----------------------------------------------------------------------------
+ * - Check if the PLL is already initialized
+ * ----------------------------------------------------------------------------
+ */
+	ldr	r1, =(AT91_BASE_SYS + AT91_PMC_MCKR)
+	ldr	r0, [r1]
+	and	r0, r0, #3
+	cmp	r0, #0
+	bne	PLL_setup_end
+
+/* ---------------------------------------------------------------------------
+ * - Enable the Main Oscillator
+ * ---------------------------------------------------------------------------
+ */
+	ldr	r1, =(AT91_BASE_SYS + AT91_CKGR_MOR)
+	ldr	r2, =(AT91_BASE_SYS + AT91_PMC_SR)
+	/* Main oscillator Enable register PMC_MOR: */
+	/* Enable main oscillator, OSCOUNT = 0xFF */
+	ldr	r0, =CONFIG_SYS_MOR_VAL
+	str	r0, [r1]
+
+	/* Reading the PMC Status to detect when the Main Oscillator is enabled */
+	mov	r4, #AT91_PMC_MOSCS
+MOSCS_Loop:
+	ldr	r3, [r2]
+	and	r3, r4, r3
+	cmp	r3, #AT91_PMC_MOSCS
+	bne	MOSCS_Loop
+
+/* ----------------------------------------------------------------------------
+ * PMC Init Step 2.
+ * ----------------------------------------------------------------------------
+ * Setup PLLA
+ * ----------------------------------------------------------------------------
+ */
+	ldr	r1, =(AT91_BASE_SYS + AT91_CKGR_PLLAR)
+	ldr	r0, =CONFIG_SYS_PLLAR_VAL
+	str	r0, [r1]
+
+	/* Reading the PMC Status register to detect when the PLLA is locked */
+	mov	r4, #AT91_PMC_LOCKA
+MOSCS_Loop1:
+	ldr	r3, [r2]
+	and	r3, r4, r3
+	cmp	r3, #AT91_PMC_LOCKA
+	bne	MOSCS_Loop1
+
+/* ----------------------------------------------------------------------------
+ * PMC Init Step 3.
+ * ----------------------------------------------------------------------------
+ * - Switch on the Main Oscillator 18.432 MHz
+ * ----------------------------------------------------------------------------
+ */
+	ldr	r1, =(AT91_BASE_SYS + AT91_PMC_MCKR)
+
+	/* -Master Clock Controller register PMC_MCKR */
+	ldr	r0, =CONFIG_SYS_MCKR1_VAL
+	str	r0, [r1]
+
+	/* Reading the PMC Status to detect when the Master clock is ready */
+	mov	r4, #AT91_PMC_MCKRDY
+MCKRDY_Loop:
+	ldr	r3, [r2]
+	and	r3, r4, r3
+	cmp	r3, #AT91_PMC_MCKRDY
+	bne	MCKRDY_Loop
+
+	ldr	r0, =CONFIG_SYS_MCKR2_VAL
+	str	r0, [r1]
+
+	/* Reading the PMC Status to detect when the Master clock is ready */
+	mov	r4, #AT91_PMC_MCKRDY
+MCKRDY_Loop1:
+	ldr	r3, [r2]
+	and	r3, r4, r3
+	cmp	r3, #AT91_PMC_MCKRDY
+	bne	MCKRDY_Loop1
+
+PLL_setup_end:
+
+/* ----------------------------------------------------------------------------
+ * - memory control configuration 2
+ * ----------------------------------------------------------------------------
+ */
+	ldr	r0, =(AT91_BASE_SYS + AT91_SDRAMC_TR)
+	ldr	r1, [r0]
+	cmp	r1, #0
+	bne	SDRAM_setup_end
+
+	ldr	r0, =SMRDATA1
+	ldr	r2, =SMRDATA2
+	ldr	r1, _TEXT_BASE
+	sub	r0, r0, r1
+	sub	r2, r2, r1
+	add	r0, r0, r5
+	add	r2, r2, r5
+
+2:
+	/* the address */
+	ldr	r1, [r0], #4
+	/* the value */
+	ldr	r3, [r0], #4
+	str	r3, [r1]
+	cmp	r2, r0
+	bne	2b
+
+SDRAM_setup_end:
+	/* everything is fine now */
+	mov	pc, lr
+
+	.ltorg
+
+SMRDATA:
+	.word (AT91_BASE_SYS + AT91_WDT_MR)
+	.word CONFIG_SYS_WDTC_WDMR_VAL
+
+	.word (AT91_BASE_SYS + AT91_PIOC + PIO_PDR)
+	.word CONFIG_SYS_PIOC_PDR_VAL1
+	.word (AT91_BASE_SYS + AT91_PIOC + PIO_PUDR)
+	.word CONFIG_SYS_PIOC_PPUDR_VAL
+
+	.word (AT91_BASE_SYS + AT91_MATRIX_EBICSA)
+	.word CONFIG_SYS_MATRIX_EBICSA_VAL
+
+	/* flash */
+	.word (AT91_BASE_SYS + AT91_SMC_MODE(0))
+	.word CONFIG_SYS_SMC0_MODE0_VAL
+
+	.word (AT91_BASE_SYS + AT91_SMC_CYCLE(0))
+	.word CONFIG_SYS_SMC0_CYCLE0_VAL
+
+	.word (AT91_BASE_SYS + AT91_SMC_PULSE(0))
+	.word CONFIG_SYS_SMC0_PULSE0_VAL
+
+	.word (AT91_BASE_SYS + AT91_SMC_SETUP(0))
+	.word CONFIG_SYS_SMC0_SETUP0_VAL
+
+SMRDATA1:
+	.word (AT91_BASE_SYS + AT91_SDRAMC_MR)
+	.word CONFIG_SYS_SDRC_MR_VAL1
+	.word (AT91_BASE_SYS + AT91_SDRAMC_TR)
+	.word CONFIG_SYS_SDRC_TR_VAL1
+	.word (AT91_BASE_SYS + AT91_SDRAMC_CR)
+	.word CONFIG_SYS_SDRC_CR_VAL
+	.word (AT91_BASE_SYS + AT91_SDRAMC_MDR)
+	.word CONFIG_SYS_SDRC_MDR_VAL
+	.word (AT91_BASE_SYS + AT91_SDRAMC_MR)
+	.word CONFIG_SYS_SDRC_MR_VAL2
+	.word AT91_SDRAM_BASE
+	.word CONFIG_SYS_SDRAM_VAL1
+	.word (AT91_BASE_SYS + AT91_SDRAMC_MR)
+	.word CONFIG_SYS_SDRC_MR_VAL3
+	.word AT91_SDRAM_BASE
+	.word CONFIG_SYS_SDRAM_VAL2
+	.word AT91_SDRAM_BASE
+	.word CONFIG_SYS_SDRAM_VAL3
+	.word AT91_SDRAM_BASE
+	.word CONFIG_SYS_SDRAM_VAL4
+	.word AT91_SDRAM_BASE
+	.word CONFIG_SYS_SDRAM_VAL5
+	.word AT91_SDRAM_BASE
+	.word CONFIG_SYS_SDRAM_VAL6
+	.word AT91_SDRAM_BASE
+	.word CONFIG_SYS_SDRAM_VAL7
+	.word AT91_SDRAM_BASE
+	.word CONFIG_SYS_SDRAM_VAL8
+	.word AT91_SDRAM_BASE
+	.word CONFIG_SYS_SDRAM_VAL9
+	.word (AT91_BASE_SYS + AT91_SDRAMC_MR)
+	.word CONFIG_SYS_SDRC_MR_VAL4
+	.word AT91_SDRAM_BASE
+	.word CONFIG_SYS_SDRAM_VAL10
+	.word (AT91_BASE_SYS + AT91_SDRAMC_MR)
+	.word CONFIG_SYS_SDRC_MR_VAL5
+	.word AT91_SDRAM_BASE
+	.word CONFIG_SYS_SDRAM_VAL11
+	.word (AT91_BASE_SYS + AT91_SDRAMC_TR)
+	.word CONFIG_SYS_SDRC_TR_VAL2
+	.word AT91_SDRAM_BASE
+	.word CONFIG_SYS_SDRAM_VAL12
+	/* User reset enable*/
+	.word (AT91_BASE_SYS + AT91_RSTC_MR)
+	.word CONFIG_SYS_RSTC_RMR_VAL
+
+SMRDATA2:
+	.word 0
diff --git a/board/ronetix/pm9261/partition.c b/board/ronetix/pm9261/partition.c
new file mode 100644
index 000000000..cc6cbef1f
--- /dev/null
+++ b/board/ronetix/pm9261/partition.c
@@ -0,0 +1,47 @@
+/*
+ * (C) Copyright 2008
+ * Ulf Samuelsson <ulf@atmel.com>
+ * Ilko Iliev <www.ronetix.at>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+#include <common.h>
+#include <config.h>
+#include <asm/hardware.h>
+#include <dataflash.h>
+
+AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS];
+
+struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = {
+	{CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0},	/* Logical adress, CS */
+};
+
+/*define the area offsets*/
+#ifdef CONFIG_SYS_USE_DATAFLASH
+dataflash_protect_t area_list[NB_DATAFLASH_AREA] = {
+	{0x00000000, 0x000041FF, FLAG_PROTECT_SET,   0, "Bootstrap"},
+	{0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"},
+	{0x00008400, 0x00041FFF, FLAG_PROTECT_SET,   0, "U-Boot"},
+	{0x00042000, 0x00251FFF, FLAG_PROTECT_CLEAR, 0,	"Kernel"},
+	{0x00252000, 0xFFFFFFFF, FLAG_PROTECT_CLEAR, 0,	"FS"},
+};
+#else
+dataflash_protect_t area_list[NB_DATAFLASH_AREA] = {
+	{0x00000000, 0xFFFFFFFF, FLAG_PROTECT_CLEAR, 0, ""},
+};
+
+#endif
diff --git a/board/ronetix/pm9261/pm9261.c b/board/ronetix/pm9261/pm9261.c
new file mode 100644
index 000000000..46948546a
--- /dev/null
+++ b/board/ronetix/pm9261/pm9261.c
@@ -0,0 +1,288 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ * Copyright (C) 2008 Ronetix Ilko Iliev (www.ronetix.at)
+ * Copyright (C) 2009 Jean-Christopher PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/sizes.h>
+#include <asm/arch/at91sam9261.h>
+#include <asm/arch/at91sam9261_matrix.h>
+#include <asm/arch/at91sam9_smc.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
+#include <asm/arch/hardware.h>
+#include <lcd.h>
+#include <atmel_lcdc.h>
+#include <dataflash.h>
+#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_DRIVER_DM9000)
+#include <net.h>
+#endif
+#include <netdev.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* ------------------------------------------------------------------------- */
+/*
+ * Miscelaneous platform dependent initialisations
+ */
+
+#ifdef CONFIG_CMD_NAND
+static void pm9261_nand_hw_init(void)
+{
+	unsigned long csa;
+
+	/* Enable CS3 */
+	csa = at91_sys_read(AT91_MATRIX_EBICSA);
+	at91_sys_write(AT91_MATRIX_EBICSA,
+		       csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
+
+	/* Configure SMC CS3 for NAND/SmartMedia */
+	at91_sys_write(AT91_SMC_SETUP(3),
+		       AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) |
+		       AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0));
+	at91_sys_write(AT91_SMC_PULSE(3),
+		       AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) |
+		       AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
+	at91_sys_write(AT91_SMC_CYCLE(3),
+		       AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
+	at91_sys_write(AT91_SMC_MODE(3),
+		       AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+		       AT91_SMC_EXNWMODE_DISABLE |
+#ifdef CONFIG_SYS_NAND_DBW_16
+		       AT91_SMC_DBW_16 |
+#else /* CONFIG_SYS_NAND_DBW_8 */
+		       AT91_SMC_DBW_8 |
+#endif
+		       AT91_SMC_TDF_(2));
+
+	/* Configure RDY/BSY */
+	at91_set_gpio_input(AT91_PIN_PA16, 1);
+
+	/* Enable NandFlash */
+	at91_set_gpio_output(AT91_PIN_PC14, 1);
+
+	at91_set_A_periph(AT91_PIN_PC0, 0);	/* NANDOE */
+	at91_set_A_periph(AT91_PIN_PC1, 0);	/* NANDWE */
+}
+#endif
+
+
+#ifdef CONFIG_DRIVER_DM9000
+static void pm9261_dm9000_hw_init(void)
+{
+	/* Configure SMC CS2 for DM9000 */
+	at91_sys_write(AT91_SMC_SETUP(2),
+		       AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(0) |
+		       AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(0));
+	at91_sys_write(AT91_SMC_PULSE(2),
+		       AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(8) |
+		       AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(8));
+	at91_sys_write(AT91_SMC_CYCLE(2),
+		       AT91_SMC_NWECYCLE_(16) | AT91_SMC_NRDCYCLE_(16));
+	at91_sys_write(AT91_SMC_MODE(2),
+		       AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+		       AT91_SMC_EXNWMODE_DISABLE |
+		       AT91_SMC_BAT_WRITE | AT91_SMC_DBW_16 |
+		       AT91_SMC_TDF_(1));
+
+	/* Configure Interrupt pin as input, no pull-up */
+	at91_set_gpio_input(AT91_PIN_PA24, 0);
+}
+#endif
+
+#ifdef CONFIG_LCD
+vidinfo_t panel_info = {
+	vl_col:		240,
+	vl_row:		320,
+	vl_clk:		4965000,
+	vl_sync:	ATMEL_LCDC_INVLINE_INVERTED |
+			ATMEL_LCDC_INVFRAME_INVERTED,
+	vl_bpix:	3,
+	vl_tft:		1,
+	vl_hsync_len:	5,
+	vl_left_margin:	1,
+	vl_right_margin:33,
+	vl_vsync_len:	1,
+	vl_upper_margin:1,
+	vl_lower_margin:0,
+	mmio:		AT91SAM9261_LCDC_BASE,
+};
+
+void lcd_enable(void)
+{
+	at91_set_gpio_value(AT91_PIN_PA22, 0);  /* power up */
+}
+
+void lcd_disable(void)
+{
+	at91_set_gpio_value(AT91_PIN_PA22, 1);  /* power down */
+}
+
+static void pm9261_lcd_hw_init(void)
+{
+	at91_set_A_periph(AT91_PIN_PB1, 0);	/* LCDHSYNC */
+	at91_set_A_periph(AT91_PIN_PB2, 0);	/* LCDDOTCK */
+	at91_set_A_periph(AT91_PIN_PB3, 0);	/* LCDDEN */
+	at91_set_A_periph(AT91_PIN_PB4, 0);	/* LCDCC */
+	at91_set_A_periph(AT91_PIN_PB7, 0);	/* LCDD2 */
+	at91_set_A_periph(AT91_PIN_PB8, 0);	/* LCDD3 */
+	at91_set_A_periph(AT91_PIN_PB9, 0);	/* LCDD4 */
+	at91_set_A_periph(AT91_PIN_PB10, 0);	/* LCDD5 */
+	at91_set_A_periph(AT91_PIN_PB11, 0);	/* LCDD6 */
+	at91_set_A_periph(AT91_PIN_PB12, 0);	/* LCDD7 */
+	at91_set_A_periph(AT91_PIN_PB15, 0);	/* LCDD10 */
+	at91_set_A_periph(AT91_PIN_PB16, 0);	/* LCDD11 */
+	at91_set_A_periph(AT91_PIN_PB17, 0);	/* LCDD12 */
+	at91_set_A_periph(AT91_PIN_PB18, 0);	/* LCDD13 */
+	at91_set_A_periph(AT91_PIN_PB19, 0);	/* LCDD14 */
+	at91_set_A_periph(AT91_PIN_PB20, 0);	/* LCDD15 */
+	at91_set_B_periph(AT91_PIN_PB23, 0);	/* LCDD18 */
+	at91_set_B_periph(AT91_PIN_PB24, 0);	/* LCDD19 */
+	at91_set_B_periph(AT91_PIN_PB25, 0);	/* LCDD20 */
+	at91_set_B_periph(AT91_PIN_PB26, 0);	/* LCDD21 */
+	at91_set_B_periph(AT91_PIN_PB27, 0);	/* LCDD22 */
+	at91_set_B_periph(AT91_PIN_PB28, 0);	/* LCDD23 */
+
+	at91_sys_write(AT91_PMC_SCER, AT91_PMC_HCK1);
+
+	gd->fb_base = AT91SAM9261_SRAM_BASE;
+}
+
+#ifdef CONFIG_LCD_INFO
+#include <nand.h>
+#include <version.h>
+
+extern flash_info_t flash_info[];
+
+void lcd_show_board_info(void)
+{
+	ulong dram_size, nand_size, flash_size, dataflash_size;
+	int i;
+	char temp[32];
+
+	lcd_printf ("%s\n", U_BOOT_VERSION);
+	lcd_printf ("(C) 2009 Ronetix GmbH\n");
+	lcd_printf ("support@ronetix.at\n");
+	lcd_printf ("%s CPU at %s MHz",
+		AT91_CPU_NAME,
+		strmhz(temp, get_cpu_clk_rate()));
+
+	dram_size = 0;
+	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
+		dram_size += gd->bd->bi_dram[i].size;
+
+	nand_size = 0;
+	for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
+		nand_size += nand_info[i].size;
+
+	flash_size = 0;
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++)
+		flash_size += flash_info[i].size;
+
+	dataflash_size = 0;
+	for (i = 0; i < CONFIG_SYS_MAX_DATAFLASH_BANKS; i++)
+		dataflash_size += (unsigned int) dataflash_info[i].Device.pages_number *
+				dataflash_info[i].Device.pages_size;
+
+	lcd_printf ("%ld MB SDRAM, %ld MB NAND\n%ld MB NOR Flash\n"
+			"%ld MB DataFlash\n",
+		dram_size >> 20,
+		nand_size >> 20,
+		flash_size >> 20,
+		dataflash_size >> 20);
+}
+#endif /* CONFIG_LCD_INFO */
+
+#endif /* CONFIG_LCD */
+
+int board_init(void)
+{
+	/* Enable Ctrlc */
+	console_init_f();
+
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_PIOA);
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_PIOC);
+
+	/* arch number of PM9261-Board */
+	gd->bd->bi_arch_number = MACH_TYPE_PM9261;
+
+	/* adress of boot parameters */
+	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+	at91_serial_hw_init();
+#ifdef CONFIG_CMD_NAND
+	pm9261_nand_hw_init();
+#endif
+#ifdef CONFIG_HAS_DATAFLASH
+	at91_spi0_hw_init(1 << 0);
+#endif
+#ifdef CONFIG_DRIVER_DM9000
+	pm9261_dm9000_hw_init();
+#endif
+#ifdef CONFIG_LCD
+	pm9261_lcd_hw_init();
+#endif
+	return 0;
+}
+
+int dram_init(void)
+{
+	gd->bd->bi_dram[0].start = PHYS_SDRAM;
+	gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
+	return 0;
+}
+
+#ifdef CONFIG_RESET_PHY_R
+void reset_phy(void)
+{
+#ifdef CONFIG_DRIVER_DM9000
+	/*
+	 * Initialize ethernet HW addr prior to starting Linux,
+	 * needed for nfsroot
+	 */
+	eth_init(gd->bd);
+#endif
+}
+#endif
+
+#ifdef CONFIG_DISPLAY_BOARDINFO
+int checkboard (void)
+{
+	char buf[32];
+
+	printf ("Board : Ronetix PM9261\n");
+	printf ("Crystal frequency: %8s MHz\n",
+					strmhz(buf, get_main_clk_rate()));
+	printf ("CPU clock        : %8s MHz\n",
+					strmhz(buf, get_cpu_clk_rate()));
+	printf ("Master clock     : %8s MHz\n",
+					strmhz(buf, get_mck_clk_rate()));
+
+	return 0;
+}
+#endif
diff --git a/include/configs/pm9261.h b/include/configs/pm9261.h
new file mode 100644
index 000000000..ac09cf294
--- /dev/null
+++ b/include/configs/pm9261.h
@@ -0,0 +1,382 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ * Ilko Iliev <www.ronetix.at>
+ *
+ * Configuation settings for the RONETIX PM9261 board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* ARM asynchronous clock */
+#define AT91_CPU_NAME		"AT91SAM9261"
+
+#define CONFIG_DISPLAY_BOARDINFO
+
+#define MASTER_PLL_DIV		15
+#define MASTER_PLL_MUL		162
+#define MAIN_PLL_DIV		2
+#define AT91_MAIN_CLOCK		18432000
+
+#define CONFIG_SYS_HZ		1000
+
+#define CONFIG_ARM926EJS	1	/* This is an ARM926EJS Core	*/
+#define CONFIG_AT91SAM9261	1	/* It's an Atmel AT91SAM9261 SoC*/
+#define CONFIG_PM9261		1	/* on a Ronetix PM9261 Board	*/
+#define CONFIG_ARCH_CPU_INIT
+#undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff	*/
+
+/* clocks */
+/* CKGR_MOR - enable main osc. */
+#define CONFIG_SYS_MOR_VAL						\
+		(AT91_PMC_MOSCEN |					\
+		 (255 << 8))		/* Main Oscillator Start-up Time */
+#define CONFIG_SYS_PLLAR_VAL						\
+		(AT91_PMC_PLLA_WR_ERRATA | /* Bit 29 must be 1 when prog */ \
+		 AT91_PMC_OUT |						\
+		 ((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV))
+
+/* PCK/2 = MCK Master Clock from PLLA */
+#define	CONFIG_SYS_MCKR1_VAL		\
+		(AT91_PMC_CSS_SLOW |	\
+		 AT91_PMC_PRES_1 |	\
+		 AT91SAM9_PMC_MDIV_2 |	\
+		 AT91_PMC_PDIV_1)
+
+/* PCK/2 = MCK Master Clock from PLLA */
+#define	CONFIG_SYS_MCKR2_VAL		\
+		(AT91_PMC_CSS_PLLA |	\
+		 AT91_PMC_PRES_1 |	\
+		 AT91SAM9_PMC_MDIV_2 |	\
+		 AT91_PMC_PDIV_1)
+
+/* define PDC[31:16] as DATA[31:16] */
+#define CONFIG_SYS_PIOC_PDR_VAL1	0xFFFF0000
+/* no pull-up for D[31:16] */
+#define CONFIG_SYS_PIOC_PPUDR_VAL	0xFFFF0000
+
+/* EBI_CSA, no pull-ups for D[15:0], CS1 SDRAM, CS3 NAND Flash */
+#define CONFIG_SYS_MATRIX_EBICSA_VAL		\
+       (AT91_MATRIX_DBPUC | AT91_MATRIX_CS1A_SDRAMC)
+
+/* SDRAM */
+/* SDRAMC_MR Mode register */
+#define CONFIG_SYS_SDRC_MR_VAL1		AT91_SDRAMC_MODE_NORMAL
+/* SDRAMC_TR - Refresh Timer register */
+#define CONFIG_SYS_SDRC_TR_VAL1		0x13C
+/* SDRAMC_CR - Configuration register*/
+#define CONFIG_SYS_SDRC_CR_VAL							\
+		(AT91_SDRAMC_NC_9 |						\
+		 AT91_SDRAMC_NR_13 |						\
+		 AT91_SDRAMC_NB_4 |						\
+		 AT91_SDRAMC_CAS_3 |						\
+		 AT91_SDRAMC_DBW_32 |						\
+		 (1 <<  8) |		/* Write Recovery Delay */		\
+		 (7 << 12) |		/* Row Cycle Delay */			\
+		 (3 << 16) |		/* Row Precharge Delay */		\
+		 (2 << 20) |		/* Row to Column Delay */		\
+		 (5 << 24) |		/* Active to Precharge Delay */		\
+		 (1 << 28))		/* Exit Self Refresh to Active Delay */
+
+/* Memory Device Register -> SDRAM */
+#define CONFIG_SYS_SDRC_MDR_VAL		AT91_SDRAMC_MD_SDRAM
+#define CONFIG_SYS_SDRC_MR_VAL2		AT91_SDRAMC_MODE_PRECHARGE
+#define CONFIG_SYS_SDRAM_VAL1		0		/* SDRAM_BASE */
+#define CONFIG_SYS_SDRC_MR_VAL3		AT91_SDRAMC_MODE_REFRESH
+#define CONFIG_SYS_SDRAM_VAL2		0		/* SDRAM_BASE */
+#define CONFIG_SYS_SDRAM_VAL3		0		/* SDRAM_BASE */
+#define CONFIG_SYS_SDRAM_VAL4		0		/* SDRAM_BASE */
+#define CONFIG_SYS_SDRAM_VAL5		0		/* SDRAM_BASE */
+#define CONFIG_SYS_SDRAM_VAL6		0		/* SDRAM_BASE */
+#define CONFIG_SYS_SDRAM_VAL7		0		/* SDRAM_BASE */
+#define CONFIG_SYS_SDRAM_VAL8		0		/* SDRAM_BASE */
+#define CONFIG_SYS_SDRAM_VAL9		0		/* SDRAM_BASE */
+#define CONFIG_SYS_SDRC_MR_VAL4		AT91_SDRAMC_MODE_LMR
+#define CONFIG_SYS_SDRAM_VAL10		0		/* SDRAM_BASE */
+#define CONFIG_SYS_SDRC_MR_VAL5		AT91_SDRAMC_MODE_NORMAL
+#define CONFIG_SYS_SDRAM_VAL11		0		/* SDRAM_BASE */
+#define CONFIG_SYS_SDRC_TR_VAL2		1200		/* SDRAM_TR */
+#define CONFIG_SYS_SDRAM_VAL12		0		/* SDRAM_BASE */
+
+/* setup SMC0, CS0 (NOR Flash) - 16-bit, 15 WS */
+#define CONFIG_SYS_SMC0_SETUP0_VAL					\
+		(AT91_SMC_NWESETUP_(10) | AT91_SMC_NCS_WRSETUP_(10) |	\
+		 AT91_SMC_NRDSETUP_(10) | AT91_SMC_NCS_RDSETUP_(10))
+#define CONFIG_SYS_SMC0_PULSE0_VAL					\
+		(AT91_SMC_NWEPULSE_(11) | AT91_SMC_NCS_WRPULSE_(11) |	\
+		 AT91_SMC_NRDPULSE_(11) | AT91_SMC_NCS_RDPULSE_(11))
+#define CONFIG_SYS_SMC0_CYCLE0_VAL	\
+		(AT91_SMC_NWECYCLE_(22) | AT91_SMC_NRDCYCLE_(22))
+#define CONFIG_SYS_SMC0_MODE0_VAL				\
+		(AT91_SMC_READMODE | AT91_SMC_WRITEMODE |	\
+		 AT91_SMC_DBW_16 |				\
+		 AT91_SMC_TDFMODE |				\
+		 AT91_SMC_TDF_(6))
+
+/* user reset enable */
+#define CONFIG_SYS_RSTC_RMR_VAL			\
+		(AT91_RSTC_KEY |		\
+		AT91_RSTC_PROCRST |		\
+		AT91_RSTC_RSTTYP_WAKEUP |	\
+		AT91_RSTC_RSTTYP_WATCHDOG)
+
+/* Disable Watchdog */
+#define CONFIG_SYS_WDTC_WDMR_VAL				\
+		(AT91_WDT_WDIDLEHLT | AT91_WDT_WDDBGHLT |	\
+		 AT91_WDT_WDV |					\
+		 AT91_WDT_WDDIS |				\
+		 AT91_WDT_WDD)
+
+#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_INITRD_TAG	1
+
+#undef CONFIG_SKIP_LOWLEVEL_INIT
+#undef CONFIG_SKIP_RELOCATE_UBOOT
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_ATMEL_USART	1
+#undef CONFIG_USART0
+#undef CONFIG_USART1
+#undef CONFIG_USART2
+#define CONFIG_USART3		1	/* USART 3 is DBGU */
+
+/* LCD */
+#define CONFIG_LCD			1
+#define LCD_BPP				LCD_COLOR8
+#define CONFIG_LCD_LOGO			1
+#undef LCD_TEST_PATTERN
+#define CONFIG_LCD_INFO			1
+#define CONFIG_LCD_INFO_BELOW_LOGO	1
+#define CONFIG_SYS_WHITE_ON_BLACK	1
+#define CONFIG_ATMEL_LCD		1
+#define CONFIG_ATMEL_LCD_BGR555		1
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV	1
+
+/* LED */
+#define CONFIG_AT91_LED
+#define	CONFIG_RED_LED		AT91_PIN_PC12
+#define	CONFIG_GREEN_LED	AT91_PIN_PC13
+#define	CONFIG_YELLOW_LED	AT91_PIN_PC15
+
+#define CONFIG_BOOTDELAY	3
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE	1
+#define CONFIG_BOOTP_BOOTPATH		1
+#define CONFIG_BOOTP_GATEWAY		1
+#define CONFIG_BOOTP_HOSTNAME		1
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_IMI
+#undef CONFIG_CMD_AUTOSCRIPT
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_IMLS
+
+#define CONFIG_CMD_PING		1
+#define CONFIG_CMD_DHCP		1
+#define CONFIG_CMD_NAND		1
+#define CONFIG_CMD_USB		1
+
+/* SDRAM */
+#define CONFIG_NR_DRAM_BANKS			1
+#define PHYS_SDRAM				0x20000000
+#define PHYS_SDRAM_SIZE				0x04000000	/* 64 megs */
+
+/* DataFlash */
+#define CONFIG_ATMEL_DATAFLASH_SPI
+#define CONFIG_HAS_DATAFLASH
+#define CONFIG_SYS_SPI_WRITE_TOUT		(5 * CONFIG_SYS_HZ)
+#define CONFIG_SYS_MAX_DATAFLASH_BANKS		1
+#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000	/* CS0 */
+#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3	0xD0000000	/* CS3 */
+#define AT91_SPI_CLK				15000000
+#define DATAFLASH_TCSS				(0x1a << 16)
+#define DATAFLASH_TCHS				(0x1 << 24)
+
+/* NAND flash */
+#define CONFIG_NAND_ATMEL
+#define NAND_MAX_CHIPS				1
+#define CONFIG_SYS_MAX_NAND_DEVICE		1
+#define CONFIG_SYS_NAND_BASE			0x40000000
+#define CONFIG_SYS_NAND_DBW_8			1
+/* our ALE is AD22 */
+#define CONFIG_SYS_NAND_MASK_ALE		(1 << 22)
+/* our CLE is AD21 */
+#define CONFIG_SYS_NAND_MASK_CLE		(1 << 21)
+#define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIN_PC14
+#define CONFIG_SYS_NAND_READY_PIN		AT91_PIN_PA16
+
+
+/* NOR flash */
+#define CONFIG_SYS_FLASH_CFI			1
+#define CONFIG_FLASH_CFI_DRIVER			1
+#define PHYS_FLASH_1				0x10000000
+#define CONFIG_SYS_FLASH_BASE			PHYS_FLASH_1
+#define CONFIG_SYS_MAX_FLASH_SECT		256
+#define CONFIG_SYS_MAX_FLASH_BANKS		1
+
+/* Ethernet */
+#define CONFIG_DRIVER_DM9000			1
+#define CONFIG_DM9000_BASE			0x30000000
+#define DM9000_IO				CONFIG_DM9000_BASE
+#define DM9000_DATA				(CONFIG_DM9000_BASE + 4)
+#define CONFIG_DM9000_USE_16BIT			1
+#define CONFIG_NET_RETRY_COUNT			20
+#define CONFIG_RESET_PHY_R			1
+
+/* USB */
+#define CONFIG_USB_ATMEL
+#define CONFIG_USB_OHCI_NEW			1
+#define CONFIG_DOS_PARTITION			1
+#define CONFIG_SYS_USB_OHCI_CPU_INIT		1
+#define CONFIG_SYS_USB_OHCI_REGS_BASE		0x00500000
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME		"at91sam9261"
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	2
+#define CONFIG_USB_STORAGE			1
+
+#define CONFIG_SYS_LOAD_ADDR			0x22000000
+
+#define CONFIG_SYS_MEMTEST_START		PHYS_SDRAM
+#define CONFIG_SYS_MEMTEST_END			0x23e00000
+
+#undef CONFIG_SYS_USE_DATAFLASH_CS0
+#undef CONFIG_SYS_USE_NANDFLASH
+#define CONFIG_SYS_USE_FLASH	1
+
+#ifdef CONFIG_SYS_USE_DATAFLASH_CS0
+
+/* bootstrap + u-boot + env + linux in dataflash on CS0 */
+#define CONFIG_ENV_IS_IN_DATAFLASH	1
+#define CONFIG_SYS_MONITOR_BASE		\
+		(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
+#define CONFIG_ENV_OFFSET	0x4200
+#define CONFIG_ENV_ADDR		\
+		(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
+#define CONFIG_ENV_SIZE		0x4200
+#define CONFIG_BOOTCOMMAND	"cp.b 0xC0042000 0x22000000 0x210000; bootm"
+#define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
+				"root=/dev/mtdblock0 "			\
+				"mtdparts=at91_nand:-(root) "		\
+				"rw rootfstype=jffs2"
+
+#elif defined(CONFIG_SYS_USE_NANDFLASH) /* CONFIG_SYS_USE_NANDFLASH */
+
+/* bootstrap + u-boot + env + linux in nandflash */
+#define CONFIG_ENV_IS_IN_NAND		1
+#define CONFIG_ENV_OFFSET		0x60000
+#define CONFIG_ENV_OFFSET_REDUND	0x80000
+#define CONFIG_ENV_SIZE			0x20000		/* 1 sector = 128 kB */
+#define CONFIG_BOOTCOMMAND	"nand read 0x22000000 0xA0000 0x200000; bootm"
+#define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
+				"root=/dev/mtdblock5 "			\
+				"mtdparts=at91_nand:128k(bootstrap)ro,"	\
+				"256k(uboot)ro,128k(env1)ro,"		\
+				"128k(env2)ro,2M(linux),-(root) "	\
+				"rw rootfstype=jffs2"
+
+#elif defined (CONFIG_SYS_USE_FLASH)
+
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_OFFSET	0x40000
+#define CONFIG_ENV_SECT_SIZE	0x10000
+#define	CONFIG_ENV_SIZE		0x10000
+#define CONFIG_ENV_OVERWRITE	1
+
+/* JFFS Partition offset set */
+#define CONFIG_SYS_JFFS2_FIRST_BANK	0
+#define CONFIG_SYS_JFFS2_NUM_BANKS	1
+
+/* 512k reserved for u-boot */
+#define CONFIG_SYS_JFFS2_FIRST_SECTOR	11
+
+#define CONFIG_BOOTCOMMAND	"run flashboot"
+
+#define MTDIDS_DEFAULT		"nor0=physmap-flash.0,nand0=nand"
+#define MTDPARTS_DEFAULT		\
+	"mtdparts=physmap-flash.0:"	\
+		"256k(u-boot)ro,"	\
+		"64k(u-boot-env)ro,"	\
+		"1408k(kernel),"	\
+		"-(rootfs);"		\
+	"nand:-(nand)"
+
+#define CONFIG_CON_ROT "fbcon=rotate:3 "
+#define CONFIG_BOOTARGS "root=/dev/mtdblock4 rootfstype=jffs2 " CONFIG_CON_ROT
+
+#define CONFIG_EXTRA_ENV_SETTINGS				\
+	"mtdids=" MTDIDS_DEFAULT "\0"				\
+	"mtdparts=" MTDPARTS_DEFAULT "\0"			\
+	"partition=nand0,0\0"					\
+	"ramargs=setenv bootargs $(bootargs) $(mtdparts)\0"	\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "		\
+		CONFIG_CON_ROT					\
+		"nfsroot=$(serverip):$(rootpath) $(mtdparts)\0"	\
+	"addip=setenv bootargs $(bootargs) "			\
+		"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)"\
+		":$(hostname):eth0:off\0"			\
+	"ramboot=tftpboot 0x22000000 vmImage;"			\
+		"run ramargs;run addip;bootm 22000000\0"	\
+	"nfsboot=tftpboot 0x22000000 vmImage;"			\
+		"run nfsargs;run addip;bootm 22000000\0"	\
+	"flashboot=run ramargs;run addip;bootm 0x10050000\0"	\
+	""
+#else
+#error "Undefined memory device"
+#endif
+
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_SYS_BAUDRATE_TABLE	{115200 , 19200, 38400, 57600, 9600 }
+
+#define CONFIG_SYS_PROMPT		"pm9261> "
+#define CONFIG_SYS_CBSIZE		256
+#define CONFIG_SYS_MAXARGS		16
+#define CONFIG_SYS_PBSIZE		\
+		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_LONGHELP		1
+#define CONFIG_CMDLINE_EDITING	1
+
+#define ROUND(A, B)		(((A) + (B)) & ~((B) - 1))
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN		\
+		ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000)
+#define CONFIG_SYS_GBL_DATA_SIZE	128
+
+#define CONFIG_STACKSIZE		(32 * 1024)	/* regular stack */
+
+#ifdef CONFIG_USE_IRQ
+#error CONFIG_USE_IRQ not supported
+#endif
+
+#endif