* Code cleanup (ARM mostly)

* Patch by Curt Brune, 17 May 2004:
  - Add support for Samsung S3C4510B CPU (ARM7tdmi based SoC)
  - Add support for ESPD-Inc. EVB4510 Board

1 files changed, 122 insertions, 49 deletions

diff --git a/cpu/arm720t/cpu.c b/cpu/arm720t/cpu.c
index 0ad5481fd..58eab4e55 100644
--- a/cpu/arm720t/cpu.c
+++ b/cpu/arm720t/cpu.c
@@ -33,51 +33,7 @@
 #include <common.h>
 #include <command.h>
 #include <clps7111.h>
-
-/* read co-processor 15, register #1 (control register) */
-static unsigned long read_p15_c1(void)
-{
-	unsigned long value;
-
-	__asm__ __volatile__(
-		"mrc     p15, 0, %0, c1, c0, 0   @ read control reg\n"
-		: "=r" (value)
-		:
-		: "memory");
-	/* printf("p15/c1 is = %08lx\n", value); */
-	return value;
-}
-
-/* write to co-processor 15, register #1 (control register) */
-static void write_p15_c1(unsigned long value)
-{
-	/* printf("write %08lx to p15/c1\n", value); */
-	__asm__ __volatile__(
-		"mcr     p15, 0, %0, c1, c0, 0   @ write it back\n"
-		:
-		: "r" (value)
-		: "memory");
-
-	read_p15_c1();
-}
-
-static void cp_delay (void)
-{
-	volatile int i;
-
-	/* copro seems to need some delay between reading and writing */
-	for (i = 0; i < 100; i++);
-}
-
-/* See also ARM Ref. Man. */
-#define C1_MMU		(1<<0)	/* mmu off/on */
-#define C1_ALIGN	(1<<1)	/* alignment faults off/on */
-#define C1_IDC		(1<<2)	/* icache and/or dcache off/on */
-#define C1_WRITE_BUFFER	(1<<3)	/* write buffer off/on */
-#define C1_BIG_ENDIAN	(1<<7)	/* big endian off/on */
-#define C1_SYS_PROT	(1<<8)	/* system protection */
-#define C1_ROM_PROT	(1<<9)	/* ROM protection */
-#define C1_HIGH_VECTORS	(1<<13)	/* location of vectors: low/high addresses */
+#include <asm/hardware.h>
 
 int cpu_init (void)
 {
@@ -103,12 +59,11 @@ int cleanup_before_linux (void)
 	 * and we set the CPU-speed to 73 MHz - see start.S for details
 	 */
 
+#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312)
 	unsigned long i;
 
 	disable_interrupts ();
-#ifdef CONFIG_NETARM
-	return 0;
-#endif
+
 	/* turn off I-cache */
 	asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i));
 	i &= ~0x1000;
@@ -116,11 +71,16 @@ int cleanup_before_linux (void)
 
 	/* flush I-cache */
 	asm ("mcr p15, 0, %0, c7, c5, 0": :"r" (i));
-
 #ifdef CONFIG_ARM7_REVD
 	/* go to high speed */
 	IO_SYSCON3 = (IO_SYSCON3 & ~CLKCTL) | CLKCTL_73;
 #endif
+#elif defined(CONFIG_NETARM) || defined(CONFIG_S3C4510B)
+	disable_interrupts ();
+	/* Nothing more needed */
+#else
+#error No cleanup_before_linux() defined for this CPU type
+#endif
 	return 0;
 }
 
@@ -134,6 +94,57 @@ int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	return (0);
 }
 
+/*
+ * Instruction and Data cache enable and disable functions
+ *
+ */
+
+#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_NETARM)
+/* read co-processor 15, register #1 (control register) */
+static unsigned long read_p15_c1(void)
+{
+	unsigned long value;
+
+	__asm__ __volatile__(
+		"mrc     p15, 0, %0, c1, c0, 0   @ read control reg\n"
+		: "=r" (value)
+		:
+		: "memory");
+	/* printf("p15/c1 is = %08lx\n", value); */
+	return value;
+}
+
+/* write to co-processor 15, register #1 (control register) */
+static void write_p15_c1(unsigned long value)
+{
+	/* printf("write %08lx to p15/c1\n", value); */
+	__asm__ __volatile__(
+		"mcr     p15, 0, %0, c1, c0, 0   @ write it back\n"
+		:
+		: "r" (value)
+		: "memory");
+
+	read_p15_c1();
+}
+
+static void cp_delay (void)
+{
+	volatile int i;
+
+	/* copro seems to need some delay between reading and writing */
+	for (i = 0; i < 100; i++);
+}
+
+/* See also ARM Ref. Man. */
+#define C1_MMU		(1<<0)	/* mmu off/on */
+#define C1_ALIGN	(1<<1)	/* alignment faults off/on */
+#define C1_IDC		(1<<2)	/* icache and/or dcache off/on */
+#define C1_WRITE_BUFFER	(1<<3)	/* write buffer off/on */
+#define C1_BIG_ENDIAN	(1<<7)	/* big endian off/on */
+#define C1_SYS_PROT	(1<<8)	/* system protection */
+#define C1_ROM_PROT	(1<<9)	/* ROM protection */
+#define C1_HIGH_VECTORS	(1<<13)	/* location of vectors: low/high addresses */
+
 void icache_enable (void)
 {
 	ulong reg;
@@ -179,3 +190,65 @@ int dcache_status (void)
 {
 	return (read_p15_c1 () & C1_IDC) != 0;
 }
+
+#elif defined(CONFIG_S3C4510B)
+
+void icache_enable (void)
+{
+	s32 i;
+
+	/* disable all cache bits */
+	CLR_REG( REG_SYSCFG, 0x3F);
+
+	/* 8KB cache, write enable */
+	SET_REG( REG_SYSCFG, CACHE_WRITE_BUFF | CACHE_MODE_01);
+
+	/* clear TAG RAM bits */
+	for ( i = 0; i < 256; i++)
+	  PUT_REG( CACHE_TAG_RAM + 4*i, 0x00000000);
+
+	/* clear SET0 RAM */
+	for(i=0; i < 1024; i++)
+	  PUT_REG( CACHE_SET0_RAM + 4*i, 0x00000000);
+
+	/* clear SET1 RAM */
+	for(i=0; i < 1024; i++)
+	  PUT_REG( CACHE_SET1_RAM + 4*i, 0x00000000);
+
+	/* enable cache */
+	SET_REG( REG_SYSCFG, CACHE_ENABLE);
+
+}
+
+void icache_disable (void)
+{
+	/* disable all cache bits */
+	CLR_REG( REG_SYSCFG, 0x3F);
+}
+
+int icache_status (void)
+{
+	return GET_REG( REG_SYSCFG) & CACHE_ENABLE;
+}
+
+void dcache_enable (void)
+{
+	/* we don't have seperate instruction/data caches */
+	icache_enable();
+}
+
+void dcache_disable (void)
+{
+	/* we don't have seperate instruction/data caches */
+	icache_disable();
+}
+
+int dcache_status (void)
+{
+	/* we don't have seperate instruction/data caches */
+	return icache_status();
+}
+
+#else
+#error No icache/dcache enable/disable functions defined for this CPU type
+#endif