* Patch by Martin Winistoerfer, 23 Mar 2003

  - Add port to MPC555/556 microcontrollers
  - Add support for cmi customer board with
    Intel 28F128J3A, 28F320J3A or 28F640J3A flash.

* Patch by Rick Bronson, 28 Mar 2003:
  - fix common/cmd_nand.c

1 files changed, 119 insertions, 0 deletions

diff --git a/cpu/mpc5xx/cpu_init.c b/cpu/mpc5xx/cpu_init.c
new file mode 100644
index 000000000..27cf3d6b1
--- /dev/null
+++ b/cpu/mpc5xx/cpu_init.c
@@ -0,0 +1,119 @@
+/*
+ * (C) Copyright 2003  Martin Winistoerfer, martinwinistoerfer@gmx.ch.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 
+ */
+
+/*
+ * File:		cpu_init.c
+ * 
+ * Discription:		Contains initialisation functions to setup
+ *    			the cpu properly
+ *
+ */
+
+#include <common.h>
+#include <mpc5xx.h>
+#include <watchdog.h>
+
+/*
+ * Setup essential cpu registers to run 
+ */
+void cpu_init_f (volatile immap_t * immr)
+{
+	volatile memctl5xx_t *memctl = &immr->im_memctl;
+	ulong reg;
+
+	/* SYPCR - contains watchdog control. This will enable watchdog */
+	/* if CONFIG_WATCHDOG is set */
+	immr->im_siu_conf.sc_sypcr = CFG_SYPCR;
+
+#if defined(CONFIG_WATCHDOG)
+	reset_5xx_watchdog (immr);
+#endif 
+
+	/* SIUMCR - contains debug pin configuration */
+	immr->im_siu_conf.sc_siumcr |= CFG_SIUMCR;
+
+	/* Initialize timebase. Unlock TBSCRK */
+	immr->im_sitk.sitk_tbscrk = KAPWR_KEY;
+	immr->im_sit.sit_tbscr = CFG_TBSCR;
+
+	/* Full IMB bus speed */
+	immr->im_uimb.uimb_umcr = CFG_UMCR;
+	
+	/* Time base and decrementer will be enables (TBE) */
+	/* in init_timebase() in time.c called from board_init_f(). */
+ 
+	/* Initialize the PIT. Unlock PISCRK */
+	immr->im_sitk.sitk_piscrk = KAPWR_KEY;
+	immr->im_sit.sit_piscr = CFG_PISCR;
+
+	/* PLL (CPU clock) settings */
+	immr->im_clkrstk.cark_plprcrk = KAPWR_KEY;
+
+	/* If CFG_PLPRCR (set in the various *_config.h files) tries to
+	 * set the MF field, then just copy CFG_PLPRCR over car_plprcr,
+	 * otherwise OR in CFG_PLPRCR so we do not change the currentMF
+	 * field value.
+	 */
+#if ((CFG_PLPRCR & PLPRCR_MF_MSK) != 0)
+	reg = CFG_PLPRCR;			/* reset control bits   */
+#else
+	reg = immr->im_clkrst.car_plprcr;
+	reg &= PLPRCR_MF_MSK;			/* isolate MF field */
+	reg |= CFG_PLPRCR;			/* reset control bits   */
+#endif
+	immr->im_clkrst.car_plprcr = reg;
+
+	/* System integration timers. CFG_MASK has EBDF configuration */
+	immr->im_clkrstk.cark_sccrk = KAPWR_KEY;
+	reg = immr->im_clkrst.car_sccr;
+	reg &= SCCR_MASK;
+	reg |= CFG_SCCR;
+	immr->im_clkrst.car_sccr = reg;
+
+	/* Memory Controller */
+	memctl->memc_br0 = CFG_BR0_PRELIM;
+	memctl->memc_or0 = CFG_OR0_PRELIM;
+
+#if (defined(CFG_OR1_PRELIM) && defined(CFG_BR1_PRELIM))
+	memctl->memc_or1 = CFG_OR1_PRELIM;
+	memctl->memc_br1 = CFG_BR1_PRELIM;
+#endif
+
+#if defined(CFG_OR2_PRELIM) && defined(CFG_BR2_PRELIM)
+	memctl->memc_or2 = CFG_OR2_PRELIM;
+	memctl->memc_br2 = CFG_BR2_PRELIM;
+#endif
+
+#if defined(CFG_OR3_PRELIM) && defined(CFG_BR3_PRELIM)
+	memctl->memc_or3 = CFG_OR3_PRELIM;
+	memctl->memc_br3 = CFG_BR3_PRELIM;
+#endif
+
+}
+
+/*
+ * Initialize higher level parts of cpu
+ */
+int cpu_init_r (void)
+{
+  	/* Nothing to do at the moment */
+	return (0);
+}