diff options
| author | Markus Klotzbuecher <mk@denx.de> | 2007-05-29 16:37:57 +0200 |
|---|---|---|
| committer | Markus Klotzbuecher <mk@pollux.denx.de> | 2007-05-29 16:37:57 +0200 |
| commit | 51d8e813222fa3063d423220f6ff1146df58a471 (patch) | |
| tree | a4951077af841bd87a90854b7fb390d12e37b851 /cpu/mpc5xxx | |
| parent | 3a619dd7bed03e8b4d22a3911f90fd12af5376c2 (diff) | |
| parent | 19bf91f9628f80a55d4f171df71041574882b3d6 (diff) | |
Merge git://www.denx.de/git/u-boot into 2007_05_15-testing
Diffstat (limited to 'cpu/mpc5xxx')
| -rw-r--r-- | cpu/mpc5xxx/cpu_init.c | 8 | ||||
| -rw-r--r-- | cpu/mpc5xxx/fec.c | 7 |
2 files changed, 11 insertions, 4 deletions
diff --git a/cpu/mpc5xxx/cpu_init.c b/cpu/mpc5xxx/cpu_init.c index 7e6582185..d7440308a 100644 --- a/cpu/mpc5xxx/cpu_init.c +++ b/cpu/mpc5xxx/cpu_init.c @@ -156,21 +156,21 @@ void cpu_init_f (void) *(vu_long *)(MPC5XXX_XLBARB + 0x40) |= (1 << 15); *(vu_long *)(MPC5XXX_XLBARB + 0x70) = CFG_SDRAM_BASE | 0x1d; -# if defined(CFG_IPBSPEED_133) +# if defined(CFG_IPBCLK_EQUALS_XLBCLK) /* Motorola reports IPB should better run at 133 MHz. */ *(vu_long *)MPC5XXX_ADDECR |= 1; /* pci_clk_sel = 0x02, ipb_clk_sel = 0x00; */ addecr = *(vu_long *)MPC5XXX_CDM_CFG; addecr &= ~0x103; -# if defined(CFG_PCISPEED_66) +# if defined(CFG_PCICLK_EQUALS_IPBCLK_DIV2) /* pci_clk_sel = 0x01 -> IPB_CLK/2 */ addecr |= 0x01; # else /* pci_clk_sel = 0x02 -> XLB_CLK/4 = IPB_CLK/4 */ addecr |= 0x02; -# endif /* CFG_PCISPEED_66 */ +# endif /* CFG_PCICLK_EQUALS_IPBCLK_DIV2 */ *(vu_long *)MPC5XXX_CDM_CFG = addecr; -# endif /* CFG_IPBSPEED_133 */ +# endif /* CFG_IPBCLK_EQUALS_XLBCLK */ /* Configure the XLB Arbiter */ *(vu_long *)MPC5XXX_XLBARB_MPRIEN = 0xff; *(vu_long *)MPC5XXX_XLBARB_MPRIVAL = 0x11111111; diff --git a/cpu/mpc5xxx/fec.c b/cpu/mpc5xxx/fec.c index e59bd85e1..813636655 100644 --- a/cpu/mpc5xxx/fec.c +++ b/cpu/mpc5xxx/fec.c @@ -428,6 +428,13 @@ static int mpc5xxx_fec_init_phy(struct eth_device *dev, bd_t * bis) */ fec->eth->imask = 0x00000000; +/* + * In original Promess-provided code PHY initialization is disabled with the + * following comment: "Phy initialization is DISABLED for now. There was a + * problem with running 100 Mbps on PRO board". Thus we temporarily disable + * PHY initialization for the Motion-PRO board, until a proper fix is found. + */ + if (fec->xcv_type != SEVENWIRE) { /* * Set MII_SPEED = (1/(mii_speed * 2)) * System Clock |