ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (1)

This patch is the first patch of a series to make the 440SPe PCIe code
usable on different 4xx PPC platforms. In preperation for the new 405EX
which is also equipped with PCIe interfaces.

(1) This patch renames the files from 440spe_pcie to 4xx_pcie

Signed-off-by: Stefan Roese <sr@denx.de>

1 files changed, 1067 insertions, 0 deletions

diff --git a/cpu/ppc4xx/4xx_pcie.c b/cpu/ppc4xx/4xx_pcie.c
new file mode 100644
index 000000000..8906adc51
--- /dev/null
+++ b/cpu/ppc4xx/4xx_pcie.c
@@ -0,0 +1,1067 @@
+/*
+ * (C) Copyright 2006 - 2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Copyright (c) 2005 Cisco Systems.  All rights reserved.
+ * Roland Dreier <rolandd@cisco.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <asm/processor.h>
+#include <asm-ppc/io.h>
+#include <ppc4xx.h>
+#include <common.h>
+#include <pci.h>
+
+#if defined(CONFIG_440SPE) && defined(CONFIG_PCI)
+
+#include <asm/4xx_pcie.h>
+
+enum {
+	PTYPE_ENDPOINT		= 0x0,
+	PTYPE_LEGACY_ENDPOINT	= 0x1,
+	PTYPE_ROOT_PORT		= 0x4,
+
+	LNKW_X1			= 0x1,
+	LNKW_X4			= 0x4,
+	LNKW_X8			= 0x8
+};
+
+static u8* pcie_get_base(struct pci_controller *hose, unsigned int devfn)
+{
+	u8 *base = (u8*)hose->cfg_data;
+
+	/* use local configuration space for the first bus */
+	if (PCI_BUS(devfn) == 0) {
+		if (hose->cfg_data == (u8*)CFG_PCIE0_CFGBASE)
+			base = (u8*)CFG_PCIE0_XCFGBASE;
+		if (hose->cfg_data == (u8*)CFG_PCIE1_CFGBASE)
+			base = (u8*)CFG_PCIE1_XCFGBASE;
+		if (hose->cfg_data == (u8*)CFG_PCIE2_CFGBASE)
+			base = (u8*)CFG_PCIE2_XCFGBASE;
+	}
+
+	return base;
+}
+
+static void pcie_dmer_disable(void)
+{
+	mtdcr (DCRN_PEGPL_CFG(DCRN_PCIE0_BASE),
+		mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE0_BASE)) | GPL_DMER_MASK_DISA);
+	mtdcr (DCRN_PEGPL_CFG(DCRN_PCIE1_BASE),
+		mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE1_BASE)) | GPL_DMER_MASK_DISA);
+	mtdcr (DCRN_PEGPL_CFG(DCRN_PCIE2_BASE),
+		mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE2_BASE)) | GPL_DMER_MASK_DISA);
+}
+
+static void pcie_dmer_enable(void)
+{
+	mtdcr (DCRN_PEGPL_CFG (DCRN_PCIE0_BASE),
+		mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE0_BASE)) & ~GPL_DMER_MASK_DISA);
+	mtdcr (DCRN_PEGPL_CFG (DCRN_PCIE1_BASE),
+		mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE1_BASE)) & ~GPL_DMER_MASK_DISA);
+	mtdcr (DCRN_PEGPL_CFG (DCRN_PCIE2_BASE),
+		mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE2_BASE)) & ~GPL_DMER_MASK_DISA);
+}
+
+static int pcie_read_config(struct pci_controller *hose, unsigned int devfn,
+	int offset, int len, u32 *val) {
+
+	u8 *address;
+	*val = 0;
+
+	/*
+	 * Bus numbers are relative to hose->first_busno
+	 */
+	devfn -= PCI_BDF(hose->first_busno, 0, 0);
+
+	/*
+	 * NOTICE: configuration space ranges are currenlty mapped only for
+	 * the first 16 buses, so such limit must be imposed. In case more
+	 * buses are required the TLB settings in board/amcc/<board>/init.S
+	 * need to be altered accordingly (one bus takes 1 MB of memory space).
+	 */
+	if (PCI_BUS(devfn) >= 16)
+		return 0;
+
+	/*
+	 * Only single device/single function is supported for the primary and
+	 * secondary buses of the 440SPe host bridge.
+	 */
+	if ((!((PCI_FUNC(devfn) == 0) && (PCI_DEV(devfn) == 0))) &&
+		((PCI_BUS(devfn) == 0) || (PCI_BUS(devfn) == 1)))
+		return 0;
+
+	address = pcie_get_base(hose, devfn);
+	offset += devfn << 4;
+
+	/*
+	 * Reading from configuration space of non-existing device can
+	 * generate transaction errors. For the read duration we suppress
+	 * assertion of machine check exceptions to avoid those.
+	 */
+	pcie_dmer_disable ();
+
+	switch (len) {
+	case 1:
+		*val = in_8(hose->cfg_data + offset);
+		break;
+	case 2:
+		*val = in_le16((u16 *)(hose->cfg_data + offset));
+		break;
+	default:
+		*val = in_le32((u32*)(hose->cfg_data + offset));
+		break;
+	}
+
+	pcie_dmer_enable ();
+
+	return 0;
+}
+
+static int pcie_write_config(struct pci_controller *hose, unsigned int devfn,
+	int offset, int len, u32 val) {
+
+	u8 *address;
+
+	/*
+	 * Bus numbers are relative to hose->first_busno
+	 */
+	devfn -= PCI_BDF(hose->first_busno, 0, 0);
+
+	/*
+	 * Same constraints as in pcie_read_config().
+	 */
+	if (PCI_BUS(devfn) >= 16)
+		return 0;
+
+	if ((!((PCI_FUNC(devfn) == 0) && (PCI_DEV(devfn) == 0))) &&
+		((PCI_BUS(devfn) == 0) || (PCI_BUS(devfn) == 1)))
+		return 0;
+
+	address = pcie_get_base(hose, devfn);
+	offset += devfn << 4;
+
+	/*
+	 * Suppress MCK exceptions, similar to pcie_read_config()
+	 */
+	pcie_dmer_disable ();
+
+	switch (len) {
+	case 1:
+		out_8(hose->cfg_data + offset, val);
+		break;
+	case 2:
+		out_le16((u16 *)(hose->cfg_data + offset), val);
+		break;
+	default:
+		out_le32((u32 *)(hose->cfg_data + offset), val);
+		break;
+	}
+
+	pcie_dmer_enable ();
+
+	return 0;
+}
+
+int pcie_read_config_byte(struct pci_controller *hose,pci_dev_t dev,int offset,u8 *val)
+{
+	u32 v;
+	int rv;
+
+	rv = pcie_read_config(hose, dev, offset, 1, &v);
+	*val = (u8)v;
+	return rv;
+}
+
+int pcie_read_config_word(struct pci_controller *hose,pci_dev_t dev,int offset,u16 *val)
+{
+	u32 v;
+	int rv;
+
+	rv = pcie_read_config(hose, dev, offset, 2, &v);
+	*val = (u16)v;
+	return rv;
+}
+
+int pcie_read_config_dword(struct pci_controller *hose,pci_dev_t dev,int offset,u32 *val)
+{
+	u32 v;
+	int rv;
+
+	rv = pcie_read_config(hose, dev, offset, 3, &v);
+	*val = (u32)v;
+	return rv;
+}
+
+int pcie_write_config_byte(struct pci_controller *hose,pci_dev_t dev,int offset,u8 val)
+{
+	return pcie_write_config(hose,(u32)dev,offset,1,val);
+}
+
+int pcie_write_config_word(struct pci_controller *hose,pci_dev_t dev,int offset,u16 val)
+{
+	return pcie_write_config(hose,(u32)dev,offset,2,(u32 )val);
+}
+
+int pcie_write_config_dword(struct pci_controller *hose,pci_dev_t dev,int offset,u32 val)
+{
+	return pcie_write_config(hose,(u32)dev,offset,3,(u32 )val);
+}
+
+static void ppc440spe_setup_utl(u32 port) {
+
+	volatile void *utl_base = NULL;
+
+	/*
+	 * Map UTL registers
+	 */
+	switch (port) {
+	case 0:
+		mtdcr(DCRN_PEGPL_REGBAH(PCIE0), 0x0000000c);
+		mtdcr(DCRN_PEGPL_REGBAL(PCIE0), 0x20000000);
+		mtdcr(DCRN_PEGPL_REGMSK(PCIE0), 0x00007001);
+		mtdcr(DCRN_PEGPL_SPECIAL(PCIE0), 0x68782800);
+		break;
+
+	case 1:
+		mtdcr(DCRN_PEGPL_REGBAH(PCIE1), 0x0000000c);
+		mtdcr(DCRN_PEGPL_REGBAL(PCIE1), 0x20001000);
+		mtdcr(DCRN_PEGPL_REGMSK(PCIE1), 0x00007001);
+		mtdcr(DCRN_PEGPL_SPECIAL(PCIE1), 0x68782800);
+		break;
+
+	case 2:
+		mtdcr(DCRN_PEGPL_REGBAH(PCIE2), 0x0000000c);
+		mtdcr(DCRN_PEGPL_REGBAL(PCIE2), 0x20002000);
+		mtdcr(DCRN_PEGPL_REGMSK(PCIE2), 0x00007001);
+		mtdcr(DCRN_PEGPL_SPECIAL(PCIE2), 0x68782800);
+		break;
+	}
+	utl_base = (unsigned int *)(CFG_PCIE_BASE + 0x1000 * port);
+
+	/*
+	 * Set buffer allocations and then assert VRB and TXE.
+	 */
+	out_be32(utl_base + PEUTL_OUTTR,   0x08000000);
+	out_be32(utl_base + PEUTL_INTR,    0x02000000);
+	out_be32(utl_base + PEUTL_OPDBSZ,  0x10000000);
+	out_be32(utl_base + PEUTL_PBBSZ,   0x53000000);
+	out_be32(utl_base + PEUTL_IPHBSZ,  0x08000000);
+	out_be32(utl_base + PEUTL_IPDBSZ,  0x10000000);
+	out_be32(utl_base + PEUTL_RCIRQEN, 0x00f00000);
+	out_be32(utl_base + PEUTL_PCTL,    0x80800066);
+}
+
+static int check_error(void)
+{
+	u32 valPE0, valPE1, valPE2;
+	int err = 0;
+
+	/* SDR0_PEGPLLLCT1 reset */
+	if (!(valPE0 = SDR_READ(PESDR0_PLLLCT1) & 0x01000000)) {
+		printf("PCIE: SDR0_PEGPLLLCT1 reset error 0x%x\n", valPE0);
+	}
+
+	valPE0 = SDR_READ(PESDR0_RCSSET);
+	valPE1 = SDR_READ(PESDR1_RCSSET);
+	valPE2 = SDR_READ(PESDR2_RCSSET);
+
+	/* SDR0_PExRCSSET rstgu */
+	if (!(valPE0 & 0x01000000) ||
+	    !(valPE1 & 0x01000000) ||
+	    !(valPE2 & 0x01000000)) {
+		printf("PCIE:  SDR0_PExRCSSET rstgu error\n");
+		err = -1;
+	}
+
+	/* SDR0_PExRCSSET rstdl */
+	if (!(valPE0 & 0x00010000) ||
+	    !(valPE1 & 0x00010000) ||
+	    !(valPE2 & 0x00010000)) {
+		printf("PCIE:  SDR0_PExRCSSET rstdl error\n");
+		err = -1;
+	}
+
+	/* SDR0_PExRCSSET rstpyn */
+	if ((valPE0 & 0x00001000) ||
+	    (valPE1 & 0x00001000) ||
+	    (valPE2 & 0x00001000)) {
+		printf("PCIE:  SDR0_PExRCSSET rstpyn error\n");
+		err = -1;
+	}
+
+	/* SDR0_PExRCSSET hldplb */
+	if ((valPE0 & 0x10000000) ||
+	    (valPE1 & 0x10000000) ||
+	    (valPE2 & 0x10000000)) {
+		printf("PCIE:  SDR0_PExRCSSET hldplb error\n");
+		err = -1;
+	}
+
+	/* SDR0_PExRCSSET rdy */
+	if ((valPE0 & 0x00100000) ||
+	    (valPE1 & 0x00100000) ||
+	    (valPE2 & 0x00100000)) {
+		printf("PCIE:  SDR0_PExRCSSET rdy error\n");
+		err = -1;
+	}
+
+	/* SDR0_PExRCSSET shutdown */
+	if ((valPE0 & 0x00000100) ||
+	    (valPE1 & 0x00000100) ||
+	    (valPE2 & 0x00000100)) {
+		printf("PCIE:  SDR0_PExRCSSET shutdown error\n");
+		err = -1;
+	}
+	return err;
+}
+
+/*
+ * Initialize PCI Express core
+ */
+int ppc440spe_init_pcie(void)
+{
+	int time_out = 20;
+
+	/* Set PLL clock receiver to LVPECL */
+	SDR_WRITE(PESDR0_PLLLCT1, SDR_READ(PESDR0_PLLLCT1) | 1 << 28);
+
+	if (check_error())
+		return -1;
+
+	if (!(SDR_READ(PESDR0_PLLLCT2) & 0x10000))
+	{
+		printf("PCIE: PESDR_PLLCT2 resistance calibration failed (0x%08x)\n",
+		       SDR_READ(PESDR0_PLLLCT2));
+		return -1;
+	}
+	/* De-assert reset of PCIe PLL, wait for lock */
+	SDR_WRITE(PESDR0_PLLLCT1, SDR_READ(PESDR0_PLLLCT1) & ~(1 << 24));
+	udelay(3);
+
+	while (time_out) {
+		if (!(SDR_READ(PESDR0_PLLLCT3) & 0x10000000)) {
+			time_out--;
+			udelay(1);
+		} else
+			break;
+	}
+	if (!time_out) {
+		printf("PCIE: VCO output not locked\n");
+		return -1;
+	}
+	return 0;
+}
+
+/*
+ *  Yucca board as End point and root point setup
+ *                    and
+ *    testing inbound and out bound windows
+ *
+ *  YUCCA board can be plugged into another yucca board or you can get PCI-E
+ *  cable which can be used to setup loop back from one port to another port.
+ *  Please rememeber that unless there is a endpoint plugged in to root port it
+ *  will not initialize. It is the same in case of endpoint , unless there is
+ *  root port attached it will not initialize.
+ *
+ *  In this release of software all the PCI-E ports are configured as either
+ *  endpoint or rootpoint.In future we will have support for selective ports
+ *  setup as endpoint and root point in single board.
+ *
+ *  Once your board came up as root point , you can verify by reading
+ *  /proc/bus/pci/devices. Where you can see the configuration registers
+ *  of end point device attached to the port.
+ *
+ *  Enpoint cofiguration can be verified by connecting Yucca board to any
+ *  host or another yucca board. Then try to scan the device. In case of
+ *  linux use "lspci" or appripriate os command.
+ *
+ *  How do I verify the inbound and out bound windows ?(yucca to yucca)
+ *  in this configuration inbound and outbound windows are setup to access
+ *  sram memroy area. SRAM is at 0x4 0000 0000 , on PLB bus. This address
+ *  is mapped at 0x90000000. From u-boot prompt write data 0xb000 0000,
+ *  This is waere your POM(PLB out bound memory window) mapped. then
+ *  read the data from other yucca board's u-boot prompt at address
+ *  0x9000 0000(SRAM). Data should match.
+ *  In case of inbound , write data to u-boot command prompt at 0xb000 0000
+ *  which is mapped to 0x4 0000 0000. Now on rootpoint yucca u-boot prompt check
+ *  data at 0x9000 0000(SRAM).Data should match.
+ */
+int ppc440spe_init_pcie_rootport(int port)
+{
+	static int core_init;
+	volatile u32 val = 0;
+	int attempts;
+
+	if (!core_init) {
+		++core_init;
+		if (ppc440spe_init_pcie())
+			return -1;
+	}
+
+	/*
+	 * Initialize various parts of the PCI Express core for our port:
+	 *
+	 * - Set as a root port and enable max width
+	 *   (PXIE0 -> X8, PCIE1 and PCIE2 -> X4).
+	 * - Set up UTL configuration.
+	 * - Increase SERDES drive strength to levels suggested by AMCC.
+	 * - De-assert RSTPYN, RSTDL and RSTGU.
+	 *
+	 * NOTICE for revB chip: PESDRn_UTLSET2 is not set - we leave it with
+	 * default setting 0x11310000. The register has new fields,
+	 * PESDRn_UTLSET2[LKINE] in particular: clearing it leads to PCIE core
+	 * hang.
+	 */
+	switch (port) {
+	case 0:
+		SDR_WRITE(PESDR0_DLPSET,  1 << 24 | PTYPE_ROOT_PORT << 20 | LNKW_X8 << 12);
+
+		SDR_WRITE(PESDR0_UTLSET1, 0x21222222);
+		if (!ppc440spe_revB())
+			SDR_WRITE(PESDR0_UTLSET2, 0x11000000);
+		SDR_WRITE(PESDR0_HSSL0SET1, 0x35000000);
+		SDR_WRITE(PESDR0_HSSL1SET1, 0x35000000);
+		SDR_WRITE(PESDR0_HSSL2SET1, 0x35000000);
+		SDR_WRITE(PESDR0_HSSL3SET1, 0x35000000);
+		SDR_WRITE(PESDR0_HSSL4SET1, 0x35000000);
+		SDR_WRITE(PESDR0_HSSL5SET1, 0x35000000);
+		SDR_WRITE(PESDR0_HSSL6SET1, 0x35000000);
+		SDR_WRITE(PESDR0_HSSL7SET1, 0x35000000);
+		SDR_WRITE(PESDR0_RCSSET,
+			  (SDR_READ(PESDR0_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12);
+		break;
+
+	case 1:
+		SDR_WRITE(PESDR1_DLPSET, 1 << 24 | PTYPE_ROOT_PORT << 20 | LNKW_X4 << 12);
+		SDR_WRITE(PESDR1_UTLSET1, 0x21222222);
+		if (!ppc440spe_revB())
+			SDR_WRITE(PESDR1_UTLSET2, 0x11000000);
+		SDR_WRITE(PESDR1_HSSL0SET1, 0x35000000);
+		SDR_WRITE(PESDR1_HSSL1SET1, 0x35000000);
+		SDR_WRITE(PESDR1_HSSL2SET1, 0x35000000);
+		SDR_WRITE(PESDR1_HSSL3SET1, 0x35000000);
+		SDR_WRITE(PESDR1_RCSSET,
+			  (SDR_READ(PESDR1_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12);
+		break;
+
+	case 2:
+		SDR_WRITE(PESDR2_DLPSET, 1 << 24 | PTYPE_ROOT_PORT << 20 | LNKW_X4 << 12);
+		SDR_WRITE(PESDR2_UTLSET1, 0x21222222);
+		if (!ppc440spe_revB())
+			SDR_WRITE(PESDR2_UTLSET2, 0x11000000);
+		SDR_WRITE(PESDR2_HSSL0SET1, 0x35000000);
+		SDR_WRITE(PESDR2_HSSL1SET1, 0x35000000);
+		SDR_WRITE(PESDR2_HSSL2SET1, 0x35000000);
+		SDR_WRITE(PESDR2_HSSL3SET1, 0x35000000);
+		SDR_WRITE(PESDR2_RCSSET,
+			  (SDR_READ(PESDR2_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12);
+		break;
+	}
+	/*
+	 * Notice: the following delay has critical impact on device
+	 * initialization - if too short (<50ms) the link doesn't get up.
+	 */
+	mdelay(100);
+
+	switch (port) {
+	case 0:
+		val = SDR_READ(PESDR0_RCSSTS);
+		break;
+	case 1:
+		val = SDR_READ(PESDR1_RCSSTS);
+		break;
+	case 2:
+		val = SDR_READ(PESDR2_RCSSTS);
+		break;
+	}
+
+	if (val & (1 << 20)) {
+		printf("PCIE%d: PGRST failed %08x\n", port, val);
+		return -1;
+	}
+
+	/*
+	 * Verify link is up
+	 */
+	val = 0;
+	switch (port) {
+	case 0:
+		val = SDR_READ(PESDR0_LOOP);
+		break;
+	case 1:
+		val = SDR_READ(PESDR1_LOOP);
+		break;
+	case 2:
+		val = SDR_READ(PESDR2_LOOP);
+		break;
+	}
+	if (!(val & 0x00001000)) {
+		printf("PCIE%d: link is not up.\n", port);
+		return -1;
+	}
+
+	/*
+	 * Setup UTL registers - but only on revA!
+	 * We use default settings for revB chip.
+	 */
+	if (!ppc440spe_revB())
+		ppc440spe_setup_utl(port);
+
+	/*
+	 * We map PCI Express configuration access into the 512MB regions
+	 *
+	 * NOTICE: revB is very strict about PLB real addressess and ranges to
+	 * be mapped for config space; it seems to only work with d_nnnn_nnnn
+	 * range (hangs the core upon config transaction attempts when set
+	 * otherwise) while revA uses c_nnnn_nnnn.
+	 *
+	 * For revA:
+	 *     PCIE0: 0xc_4000_0000
+	 *     PCIE1: 0xc_8000_0000
+	 *     PCIE2: 0xc_c000_0000
+	 *
+	 * For revB:
+	 *     PCIE0: 0xd_0000_0000
+	 *     PCIE1: 0xd_2000_0000
+	 *     PCIE2: 0xd_4000_0000
+	 */
+
+	switch (port) {
+	case 0:
+		if (ppc440spe_revB()) {
+			mtdcr(DCRN_PEGPL_CFGBAH(PCIE0), 0x0000000d);
+			mtdcr(DCRN_PEGPL_CFGBAL(PCIE0), 0x00000000);
+		} else {
+			/* revA */
+			mtdcr(DCRN_PEGPL_CFGBAH(PCIE0), 0x0000000c);
+			mtdcr(DCRN_PEGPL_CFGBAL(PCIE0), 0x40000000);
+		}
+		mtdcr(DCRN_PEGPL_CFGMSK(PCIE0), 0xe0000001); /* 512MB region, valid */
+		break;
+
+	case 1:
+		if (ppc440spe_revB()) {
+			mtdcr(DCRN_PEGPL_CFGBAH(PCIE1), 0x0000000d);
+			mtdcr(DCRN_PEGPL_CFGBAL(PCIE1), 0x20000000);
+		} else {
+			mtdcr(DCRN_PEGPL_CFGBAH(PCIE1), 0x0000000c);
+			mtdcr(DCRN_PEGPL_CFGBAL(PCIE1), 0x80000000);
+		}
+		mtdcr(DCRN_PEGPL_CFGMSK(PCIE1), 0xe0000001); /* 512MB region, valid */
+		break;
+
+	case 2:
+		if (ppc440spe_revB()) {
+			mtdcr(DCRN_PEGPL_CFGBAH(PCIE2), 0x0000000d);
+			mtdcr(DCRN_PEGPL_CFGBAL(PCIE2), 0x40000000);
+		} else {
+			mtdcr(DCRN_PEGPL_CFGBAH(PCIE2), 0x0000000c);
+			mtdcr(DCRN_PEGPL_CFGBAL(PCIE2), 0xc0000000);
+		}
+		mtdcr(DCRN_PEGPL_CFGMSK(PCIE2), 0xe0000001); /* 512MB region, valid */
+		break;
+	}
+
+	/*
+	 * Check for VC0 active and assert RDY.
+	 */
+	attempts = 10;
+	switch (port) {
+	case 0:
+		while(!(SDR_READ(PESDR0_RCSSTS) & (1 << 16))) {
+			if (!(attempts--)) {
+				printf("PCIE0: VC0 not active\n");
+				return -1;
+			}
+			mdelay(1000);
+		}
+		SDR_WRITE(PESDR0_RCSSET, SDR_READ(PESDR0_RCSSET) | 1 << 20);
+		break;
+	case 1:
+		while(!(SDR_READ(PESDR1_RCSSTS) & (1 << 16))) {
+			if (!(attempts--)) {
+				printf("PCIE1: VC0 not active\n");
+				return -1;
+			}
+			mdelay(1000);
+		}
+
+		SDR_WRITE(PESDR1_RCSSET, SDR_READ(PESDR1_RCSSET) | 1 << 20);
+		break;
+	case 2:
+		while(!(SDR_READ(PESDR2_RCSSTS) & (1 << 16))) {
+			if (!(attempts--)) {
+				printf("PCIE2: VC0 not active\n");
+				return -1;
+			}
+			mdelay(1000);
+		}
+
+		SDR_WRITE(PESDR2_RCSSET, SDR_READ(PESDR2_RCSSET) | 1 << 20);
+		break;
+	}
+	mdelay(100);
+
+	return 0;
+}
+
+int ppc440spe_init_pcie_endport(int port)
+{
+	static int core_init;
+	volatile u32 val = 0;
+	int attempts;
+
+	if (!core_init) {
+		++core_init;
+		if (ppc440spe_init_pcie())
+			return -1;
+	}
+
+	/*
+	 * Initialize various parts of the PCI Express core for our port:
+	 *
+	 * - Set as a end port and enable max width
+	 *   (PXIE0 -> X8, PCIE1 and PCIE2 -> X4).
+	 * - Set up UTL configuration.
+	 * - Increase SERDES drive strength to levels suggested by AMCC.
+	 * - De-assert RSTPYN, RSTDL and RSTGU.
+	 *
+	 * NOTICE for revB chip: PESDRn_UTLSET2 is not set - we leave it with
+	 * default setting 0x11310000. The register has new fields,
+	 * PESDRn_UTLSET2[LKINE] in particular: clearing it leads to PCIE core
+	 * hang.
+	 */
+	switch (port) {
+	case 0:
+		SDR_WRITE(PESDR0_DLPSET,  1 << 24 | PTYPE_LEGACY_ENDPOINT << 20 | LNKW_X8 << 12);
+
+		SDR_WRITE(PESDR0_UTLSET1, 0x20222222);
+		if (!ppc440spe_revB())
+			SDR_WRITE(PESDR0_UTLSET2, 0x11000000);
+		SDR_WRITE(PESDR0_HSSL0SET1, 0x35000000);
+		SDR_WRITE(PESDR0_HSSL1SET1, 0x35000000);
+		SDR_WRITE(PESDR0_HSSL2SET1, 0x35000000);
+		SDR_WRITE(PESDR0_HSSL3SET1, 0x35000000);
+		SDR_WRITE(PESDR0_HSSL4SET1, 0x35000000);
+		SDR_WRITE(PESDR0_HSSL5SET1, 0x35000000);
+		SDR_WRITE(PESDR0_HSSL6SET1, 0x35000000);
+		SDR_WRITE(PESDR0_HSSL7SET1, 0x35000000);
+		SDR_WRITE(PESDR0_RCSSET,
+			(SDR_READ(PESDR0_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12);
+		break;
+
+	case 1:
+		SDR_WRITE(PESDR1_DLPSET, 1 << 24 | PTYPE_LEGACY_ENDPOINT << 20 | LNKW_X4 << 12);
+		SDR_WRITE(PESDR1_UTLSET1, 0x20222222);
+		if (!ppc440spe_revB())
+			SDR_WRITE(PESDR1_UTLSET2, 0x11000000);
+		SDR_WRITE(PESDR1_HSSL0SET1, 0x35000000);
+		SDR_WRITE(PESDR1_HSSL1SET1, 0x35000000);
+		SDR_WRITE(PESDR1_HSSL2SET1, 0x35000000);
+		SDR_WRITE(PESDR1_HSSL3SET1, 0x35000000);
+		SDR_WRITE(PESDR1_RCSSET,
+			(SDR_READ(PESDR1_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12);
+		break;
+
+	case 2:
+		SDR_WRITE(PESDR2_DLPSET, 1 << 24 | PTYPE_LEGACY_ENDPOINT << 20 | LNKW_X4 << 12);
+		SDR_WRITE(PESDR2_UTLSET1, 0x20222222);
+		if (!ppc440spe_revB())
+			SDR_WRITE(PESDR2_UTLSET2, 0x11000000);
+		SDR_WRITE(PESDR2_HSSL0SET1, 0x35000000);
+		SDR_WRITE(PESDR2_HSSL1SET1, 0x35000000);
+		SDR_WRITE(PESDR2_HSSL2SET1, 0x35000000);
+		SDR_WRITE(PESDR2_HSSL3SET1, 0x35000000);
+		SDR_WRITE(PESDR2_RCSSET,
+			(SDR_READ(PESDR2_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12);
+		break;
+	}
+	/*
+	 * Notice: the following delay has critical impact on device
+	 * initialization - if too short (<50ms) the link doesn't get up.
+	 */
+	mdelay(100);
+
+	switch (port) {
+	case 0: val = SDR_READ(PESDR0_RCSSTS); break;
+	case 1: val = SDR_READ(PESDR1_RCSSTS); break;
+	case 2: val = SDR_READ(PESDR2_RCSSTS); break;
+	}
+
+	if (val & (1 << 20)) {
+		printf("PCIE%d: PGRST failed %08x\n", port, val);
+		return -1;
+	}
+
+	/*
+	 * Verify link is up
+	 */
+	val = 0;
+	switch (port)
+	{
+		case 0:
+			val = SDR_READ(PESDR0_LOOP);
+			break;
+		case 1:
+			val = SDR_READ(PESDR1_LOOP);
+			break;
+		case 2:
+			val = SDR_READ(PESDR2_LOOP);
+			break;
+	}
+	if (!(val & 0x00001000)) {
+		printf("PCIE%d: link is not up.\n", port);
+		return -1;
+	}
+
+	/*
+	 * Setup UTL registers - but only on revA!
+	 * We use default settings for revB chip.
+	 */
+	if (!ppc440spe_revB())
+		ppc440spe_setup_utl(port);
+
+	/*
+	 * We map PCI Express configuration access into the 512MB regions
+	 *
+	 * NOTICE: revB is very strict about PLB real addressess and ranges to
+	 * be mapped for config space; it seems to only work with d_nnnn_nnnn
+	 * range (hangs the core upon config transaction attempts when set
+	 * otherwise) while revA uses c_nnnn_nnnn.
+	 *
+	 * For revA:
+	 *     PCIE0: 0xc_4000_0000
+	 *     PCIE1: 0xc_8000_0000
+	 *     PCIE2: 0xc_c000_0000
+	 *
+	 * For revB:
+	 *     PCIE0: 0xd_0000_0000
+	 *     PCIE1: 0xd_2000_0000
+	 *     PCIE2: 0xd_4000_0000
+	 */
+	switch (port) {
+	case 0:
+		if (ppc440spe_revB()) {
+			mtdcr(DCRN_PEGPL_CFGBAH(PCIE0), 0x0000000d);
+			mtdcr(DCRN_PEGPL_CFGBAL(PCIE0), 0x00000000);
+		} else {
+			/* revA */
+			mtdcr(DCRN_PEGPL_CFGBAH(PCIE0), 0x0000000c);
+			mtdcr(DCRN_PEGPL_CFGBAL(PCIE0), 0x40000000);
+		}
+		mtdcr(DCRN_PEGPL_CFGMSK(PCIE0), 0xe0000001); /* 512MB region, valid */
+		break;
+
+	case 1:
+		if (ppc440spe_revB()) {
+			mtdcr(DCRN_PEGPL_CFGBAH(PCIE1), 0x0000000d);
+			mtdcr(DCRN_PEGPL_CFGBAL(PCIE1), 0x20000000);
+		} else {
+			mtdcr(DCRN_PEGPL_CFGBAH(PCIE1), 0x0000000c);
+			mtdcr(DCRN_PEGPL_CFGBAL(PCIE1), 0x80000000);
+		}
+		mtdcr(DCRN_PEGPL_CFGMSK(PCIE1), 0xe0000001); /* 512MB region, valid */
+		break;
+
+	case 2:
+		if (ppc440spe_revB()) {
+			mtdcr(DCRN_PEGPL_CFGBAH(PCIE2), 0x0000000d);
+			mtdcr(DCRN_PEGPL_CFGBAL(PCIE2), 0x40000000);
+		} else {
+			mtdcr(DCRN_PEGPL_CFGBAH(PCIE2), 0x0000000c);
+			mtdcr(DCRN_PEGPL_CFGBAL(PCIE2), 0xc0000000);
+		}
+		mtdcr(DCRN_PEGPL_CFGMSK(PCIE2), 0xe0000001); /* 512MB region, valid */
+		break;
+	}
+
+	/*
+	 * Check for VC0 active and assert RDY.
+	 */
+	attempts = 10;
+	switch (port) {
+	case 0:
+		while(!(SDR_READ(PESDR0_RCSSTS) & (1 << 16))) {
+			if (!(attempts--)) {
+				printf("PCIE0: VC0 not active\n");
+				return -1;
+			}
+			mdelay(1000);
+		}
+		SDR_WRITE(PESDR0_RCSSET, SDR_READ(PESDR0_RCSSET) | 1 << 20);
+		break;
+	case 1:
+		while(!(SDR_READ(PESDR1_RCSSTS) & (1 << 16))) {
+			if (!(attempts--)) {
+				printf("PCIE1: VC0 not active\n");
+				return -1;
+			}
+			mdelay(1000);
+		}
+
+		SDR_WRITE(PESDR1_RCSSET, SDR_READ(PESDR1_RCSSET) | 1 << 20);
+		break;
+	case 2:
+		while(!(SDR_READ(PESDR2_RCSSTS) & (1 << 16))) {
+			if (!(attempts--)) {
+				printf("PCIE2: VC0 not active\n");
+				return -1;
+			}
+			mdelay(1000);
+		}
+
+		SDR_WRITE(PESDR2_RCSSET, SDR_READ(PESDR2_RCSSET) | 1 << 20);
+		break;
+	}
+	mdelay(100);
+
+	return 0;
+}
+
+void ppc440spe_setup_pcie_rootpoint(struct pci_controller *hose, int port)
+{
+	volatile void *mbase = NULL;
+	volatile void *rmbase = NULL;
+
+	pci_set_ops(hose,
+		pcie_read_config_byte,
+		pcie_read_config_word,
+		pcie_read_config_dword,
+		pcie_write_config_byte,
+		pcie_write_config_word,
+		pcie_write_config_dword);
+
+	switch (port) {
+	case 0:
+		mbase = (u32 *)CFG_PCIE0_XCFGBASE;
+		rmbase = (u32 *)CFG_PCIE0_CFGBASE;
+		hose->cfg_data = (u8 *)CFG_PCIE0_CFGBASE;
+		break;
+	case 1:
+		mbase = (u32 *)CFG_PCIE1_XCFGBASE;
+		rmbase = (u32 *)CFG_PCIE1_CFGBASE;
+		hose->cfg_data = (u8 *)CFG_PCIE1_CFGBASE;
+		break;
+	case 2:
+		mbase = (u32 *)CFG_PCIE2_XCFGBASE;
+		rmbase = (u32 *)CFG_PCIE2_CFGBASE;
+		hose->cfg_data = (u8 *)CFG_PCIE2_CFGBASE;
+		break;
+	}
+
+	/*
+	 * Set bus numbers on our root port
+	 */
+	out_8((u8 *)mbase + PCI_PRIMARY_BUS, 0);
+	out_8((u8 *)mbase + PCI_SECONDARY_BUS, 1);
+	out_8((u8 *)mbase + PCI_SUBORDINATE_BUS, 1);
+
+	/*
+	 * Set up outbound translation to hose->mem_space from PLB
+	 * addresses at an offset of 0xd_0000_0000.  We set the low
+	 * bits of the mask to 11 to turn off splitting into 8
+	 * subregions and to enable the outbound translation.
+	 */
+	out_le32(mbase + PECFG_POM0LAH, 0x00000000);
+	out_le32(mbase + PECFG_POM0LAL, 0x00000000);
+
+	switch (port) {
+	case 0:
+		mtdcr(DCRN_PEGPL_OMR1BAH(PCIE0),  0x0000000d);
+		mtdcr(DCRN_PEGPL_OMR1BAL(PCIE0),  CFG_PCIE_MEMBASE +
+			port * CFG_PCIE_MEMSIZE);
+		mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE0), 0x7fffffff);
+		mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE0),
+			~(CFG_PCIE_MEMSIZE - 1) | 3);
+		break;
+	case 1:
+		mtdcr(DCRN_PEGPL_OMR1BAH(PCIE1),  0x0000000d);
+		mtdcr(DCRN_PEGPL_OMR1BAL(PCIE1),  (CFG_PCIE_MEMBASE +
+			port * CFG_PCIE_MEMSIZE));
+		mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE1), 0x7fffffff);
+		mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE1),
+			~(CFG_PCIE_MEMSIZE - 1) | 3);
+		break;
+	case 2:
+		mtdcr(DCRN_PEGPL_OMR1BAH(PCIE2),  0x0000000d);
+		mtdcr(DCRN_PEGPL_OMR1BAL(PCIE2),  (CFG_PCIE_MEMBASE +
+			port * CFG_PCIE_MEMSIZE));
+		mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE2), 0x7fffffff);
+		mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE2),
+			~(CFG_PCIE_MEMSIZE - 1) | 3);
+		break;
+	}
+
+	/* Set up 16GB inbound memory window at 0 */
+	out_le32(mbase + PCI_BASE_ADDRESS_0, 0);
+	out_le32(mbase + PCI_BASE_ADDRESS_1, 0);
+	out_le32(mbase + PECFG_BAR0HMPA, 0x7fffffc);
+	out_le32(mbase + PECFG_BAR0LMPA, 0);
+
+	out_le32(mbase + PECFG_PIM01SAH, 0xffff0000);
+	out_le32(mbase + PECFG_PIM01SAL, 0x00000000);
+	out_le32(mbase + PECFG_PIM0LAL, 0);
+	out_le32(mbase + PECFG_PIM0LAH, 0);
+	out_le32(mbase + PECFG_PIM1LAL,  0x00000000);
+	out_le32(mbase + PECFG_PIM1LAH,  0x00000004);
+	out_le32(mbase + PECFG_PIMEN, 0x1);
+
+	/* Enable I/O, Mem, and Busmaster cycles */
+	out_le16((u16 *)(mbase + PCI_COMMAND),
+		 in_le16((u16 *)(mbase + PCI_COMMAND)) |
+		 PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+	printf("PCIE:%d successfully set as rootpoint\n",port);
+
+	/* Set Device and Vendor Id */
+	switch (port) {
+	case 0:
+		out_le16(mbase + 0x200, 0xaaa0);
+		out_le16(mbase + 0x202, 0xbed0);
+		break;
+	case 1:
+		out_le16(mbase + 0x200, 0xaaa1);
+		out_le16(mbase + 0x202, 0xbed1);
+		break;
+	case 2:
+		out_le16(mbase + 0x200, 0xaaa2);
+		out_le16(mbase + 0x202, 0xbed2);
+		break;
+	default:
+		out_le16(mbase + 0x200, 0xaaa3);
+		out_le16(mbase + 0x202, 0xbed3);
+	}
+
+	/* Set Class Code to PCI-PCI bridge and Revision Id to 1 */
+	out_le32(mbase + 0x208, 0x06040001);
+
+}
+
+int ppc440spe_setup_pcie_endpoint(struct pci_controller *hose, int port)
+{
+	volatile void *mbase = NULL;
+	int attempts = 0;
+
+	pci_set_ops(hose,
+		    pcie_read_config_byte,
+		    pcie_read_config_word,
+		    pcie_read_config_dword,
+		    pcie_write_config_byte,
+		    pcie_write_config_word,
+		    pcie_write_config_dword);
+
+	switch (port) {
+	case 0:
+		mbase = (u32 *)CFG_PCIE0_XCFGBASE;
+		hose->cfg_data = (u8 *)CFG_PCIE0_CFGBASE;
+		break;
+	case 1:
+		mbase = (u32 *)CFG_PCIE1_XCFGBASE;
+		hose->cfg_data = (u8 *)CFG_PCIE1_CFGBASE;
+		break;
+	case 2:
+		mbase = (u32 *)CFG_PCIE2_XCFGBASE;
+		hose->cfg_data = (u8 *)CFG_PCIE2_CFGBASE;
+		break;
+	}
+
+	/*
+	 * Set up outbound translation to hose->mem_space from PLB
+	 * addresses at an offset of 0xd_0000_0000.  We set the low
+	 * bits of the mask to 11 to turn off splitting into 8
+	 * subregions and to enable the outbound translation.
+	 */
+	out_le32(mbase + PECFG_POM0LAH, 0x00001ff8);
+	out_le32(mbase + PECFG_POM0LAL, 0x00001000);
+
+	switch (port) {
+	case 0:
+		mtdcr(DCRN_PEGPL_OMR1BAH(PCIE0),  0x0000000d);
+		mtdcr(DCRN_PEGPL_OMR1BAL(PCIE0),  CFG_PCIE_MEMBASE +
+			port * CFG_PCIE_MEMSIZE);
+		mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE0), 0x7fffffff);
+		mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE0),
+			~(CFG_PCIE_MEMSIZE - 1) | 3);
+		break;
+	case 1:
+		mtdcr(DCRN_PEGPL_OMR1BAH(PCIE1),  0x0000000d);
+		mtdcr(DCRN_PEGPL_OMR1BAL(PCIE1),  (CFG_PCIE_MEMBASE +
+			port * CFG_PCIE_MEMSIZE));
+		mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE1), 0x7fffffff);
+		mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE1),
+			~(CFG_PCIE_MEMSIZE - 1) | 3);
+		break;
+	case 2:
+		mtdcr(DCRN_PEGPL_OMR1BAH(PCIE2),  0x0000000d);
+		mtdcr(DCRN_PEGPL_OMR1BAL(PCIE2),  (CFG_PCIE_MEMBASE +
+			port * CFG_PCIE_MEMSIZE));
+		mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE2), 0x7fffffff);
+		mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE2),
+			~(CFG_PCIE_MEMSIZE - 1) | 3);
+		break;
+	}
+
+	/* Set up 16GB inbound memory window at 0 */
+	out_le32(mbase + PCI_BASE_ADDRESS_0, 0);
+	out_le32(mbase + PCI_BASE_ADDRESS_1, 0);
+	out_le32(mbase + PECFG_BAR0HMPA, 0x7fffffc);
+	out_le32(mbase + PECFG_BAR0LMPA, 0);
+	out_le32(mbase + PECFG_PIM0LAL, 0x00000000);
+	out_le32(mbase + PECFG_PIM0LAH, 0x00000004);	/* pointing to SRAM */
+	out_le32(mbase + PECFG_PIMEN, 0x1);
+
+	/* Enable I/O, Mem, and Busmaster cycles */
+	out_le16((u16 *)(mbase + PCI_COMMAND),
+		in_le16((u16 *)(mbase + PCI_COMMAND)) |
+		PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+	out_le16(mbase + 0x200,0xcaad);			/* Setting vendor ID */
+	out_le16(mbase + 0x202,0xfeed);			/* Setting device ID */
+	attempts = 10;
+	switch (port) {
+	case 0:
+		while (!(SDR_READ(PESDR0_RCSSTS) & (1 << 8))) {
+			if (!(attempts--)) {
+				printf("PCIE0: BMEN is  not active\n");
+				return -1;
+			}
+			mdelay(1000);
+		}
+		break;
+	case 1:
+		while (!(SDR_READ(PESDR1_RCSSTS) & (1 << 8))) {
+			if (!(attempts--)) {
+				printf("PCIE1: BMEN is not active\n");
+				return -1;
+			}
+			mdelay(1000);
+		}
+		break;
+	case 2:
+		while (!(SDR_READ(PESDR2_RCSSTS) & (1 << 8))) {
+			if (!(attempts--)) {
+				printf("PCIE2: BMEN is  not active\n");
+				return -1;
+			}
+			mdelay(1000);
+		}
+		break;
+	}
+	printf("PCIE:%d successfully set as endpoint\n",port);
+
+	return 0;
+}
+#endif /* CONFIG_440SPE && CONFIG_PCI */