HREF V1 updates

This patch is part of WP254081 which depends on WP252006.

* Fixed I2C, use real timeouts instead of counter

* Undefined CONFIG_BOOTTIME, since it as to be changed to new timer.c

* Merged V1 patches from Bangalore

The patches were merged manually, because of the differences
of the U-Boot baseline (Bangalore U-Boot 1.3.1, Lund 2009.11).

The original patches were created by Rabin Vincent
<rabin.vincent@stericsson.com>.
and were applied originally to
Branches: blr_lsp, remotes/origin/blr_lsp
Follows: qpppaaa_20100210_094651

0001-u8500-gpio-add-I2C0-altfun.patch
0002-u8500-use-correct-v1-macros.patch
0003-emmc-clean-up-paritioning.patch
0004-u8500-remove-incorrect-ram-settings.patch
0005-u8500-gpio-remove-unnecessary-ifdefs.patch
0006-u8500-add-ED-v1-detection-and-handle-eMMC-diff.patch
0008-u8500-mmc-don-t-disable-altfuns.patch
0009-u8500-gpio-remove-unused-defined.patch
0010-u8500-mmc-add-barrier-for-while-loop.patch
0011-u8500-mmc-handle-non-block-addressed-cards.patch
0012-u8500-mmc-remove-unused-gpio-settings-on-v1.patch
0013-u8500-emmc-build-fix.patch
0014-u8500-handle-v1-gpios-and-clocks.patch
0015-mmc-build-fix-for-block-addressing.patch
0016-u8500-add-clocks-and-hardware-files.patch
0017-u8500-enable-PRCUM-timers-reg-for-ED.patch
0018-u8500-handle-MTU-for-v1-ED.patch
0019-u8500-emmc-remove-unnecessary-GPIO-settings.patch
0020-u8500-remove-dead-code.patch
0021-u8500-add-working-MTU-timer.patch
0022-pl011-empty-rx-fifo-if-necessary.patch
0023-u8500-gpio-fix-cont-handling-in-altfunc.patch
0024-u8500-reduce-bootdelay-to-1-and-enable-zero-check.patch
0025-u8500-disable-forcing-of-verify-but-set-n-by-default.patch
0029-u8500-fix-some-gpio-settings.patch
0030-emmc-make-v1-paritioning-differences-explicit.patch

Signed-off-by: Michael Brandt <Michael.Brandt@stericsson.com>
Change-Id: I1106702e393c34f630e71f071e06c3952b0d3a1a
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/182
Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
Tested-by: Jonas ABERG <jonas.aberg@stericsson.com>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>

2 files changed, 158 insertions, 0 deletions

diff --git a/include/asm-arm/arch-stw8500/clock.h b/include/asm-arm/arch-stw8500/clock.h
new file mode 100644
index 000000000..5317aaf8d
--- /dev/null
+++ b/include/asm-arm/arch-stw8500/clock.h
@@ -0,0 +1,73 @@
+/*
+ * (C) Copyright 2009
+ * ST-Ericsson, <www.stericsson.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_CLOCK
+#define __ASM_ARCH_CLOCK
+
+struct prcmu {
+	unsigned int armclkfix_mgt;
+	unsigned int armclk_mgt;
+	unsigned int svammdspclk_mgt;
+	unsigned int siammdspclk_mgt;
+	unsigned int reserved;
+	unsigned int sgaclk_mgt;
+	unsigned int uartclk_mgt;
+	unsigned int msp02clk_mgt;
+	unsigned int i2cclk_mgt;
+	unsigned int sdmmcclk_mgt;
+	unsigned int slimclk_mgt;
+	unsigned int per1clk_mgt;
+	unsigned int per2clk_mgt;
+	unsigned int per3clk_mgt;
+	unsigned int per5clk_mgt;
+	unsigned int per6clk_mgt;
+	unsigned int per7clk_mgt;
+	unsigned int lcdclk_mgt;
+	unsigned int reserved1;
+	unsigned int bmlclk_mgt;
+	unsigned int hsitxclk_mgt;
+	unsigned int hsirxclk_mgt;
+	unsigned int hdmiclk_mgt;
+	unsigned int apeatclk_mgt;
+	unsigned int apetraceclk_mgt;
+	unsigned int mcdeclk_mgt;
+	unsigned int ipi2cclk_mgt;
+	unsigned int dsialtclk_mgt;
+	unsigned int spare2clk_mgt;
+	unsigned int dmaclk_mgt;
+	unsigned int b2r2clk_mgt;
+	unsigned int tvclk_mgt;
+	unsigned int unused[82];
+	unsigned int tcr;
+	unsigned int unused1[23];
+	unsigned int ape_softrst;
+};
+
+extern void u8500_clock_enable(int periph, int kern, int cluster);
+
+static inline void u8500_prcmu_enable(unsigned int *reg)
+{
+	writel(readl(reg) | (1 << 8), reg);
+}
+
+#endif /* __ASM_ARCH_CLOCK */
diff --git a/include/asm-arm/arch-stw8500/hardware.h b/include/asm-arm/arch-stw8500/hardware.h
new file mode 100644
index 000000000..650851cc9
--- /dev/null
+++ b/include/asm-arm/arch-stw8500/hardware.h
@@ -0,0 +1,85 @@
+/*
+ * (C) Copyright 2009
+ * ST-Ericsson <www.stericsson.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+/* Peripheral clusters */
+
+#define U8500_PER3_BASE		0x80000000
+#define U8500_PER2_BASE		0x80110000
+#define U8500_PER1_BASE		0x80120000
+#define U8500_PER4_BASE		0x80150000
+
+#define U8500_PER6_BASE		0xa03c0000
+#define U8500_PER7_BASE		0xa03d0000
+#define U8500_PER5_BASE		0xa03e0000
+
+/* GPIO */
+
+#define U8500_GPIO0_BASE	(U8500_PER1_BASE + 0xE000)
+#define U8500_GPIO1_BASE	(U8500_PER1_BASE + 0xE000 + 0x80)
+
+#define U8500_GPIO2_BASE	(U8500_PER3_BASE + 0xE000)
+#define U8500_GPIO3_BASE	(U8500_PER3_BASE + 0xE000 + 0x80)
+#define U8500_GPIO4_BASE	(U8500_PER3_BASE + 0xE000 + 0x100)
+#define U8500_GPIO5_BASE	(U8500_PER3_BASE + 0xE000 + 0x180)
+
+#define U8500_GPIO6_BASE	(U8500_PER2_BASE + 0xE000)
+#define U8500_GPIO7_BASE	(U8500_PER2_BASE + 0xE000 + 0x80)
+
+#define U8500_GPIO8_BASE	(U8500_PER5_BASE + 0x1E000)
+
+/* Per7 */
+#define U8500_MTU0_BASE_ED	(U8500_PER7_BASE + 0xa000)
+#define U8500_MTU1_BASE_ED	(U8500_PER7_BASE + 0xb000)
+#define U8500_CLKRST7_BASE	(U8500_PER7_BASE + 0xf000)
+
+/* Per6 */
+#define U8500_MTU0_BASE_V1	(U8500_PER6_BASE + 0x6000)
+#define U8500_MTU1_BASE_v1	(U8500_PER6_BASE + 0x7000)
+#define U8500_CLKRST6_BASE	(U8500_PER6_BASE + 0xf000)
+
+/* Per5 */
+#define U8500_CLKRST5_BASE	(U8500_PER5_BASE + 0x1f000)
+
+/* Per4 */
+#define U8500_PRCMU_BASE	(U8500_PER4_BASE + 0x07000)
+
+/* Per3 */
+#define U8500_UART2_BASE	(U8500_PER3_BASE + 0x7000)
+#define U8500_CLKRST3_BASE	(U8500_PER3_BASE + 0xf000)
+
+/* Per2 */
+#define U8500_CLKRST2_BASE	(U8500_PER2_BASE + 0xf000)
+
+/* Per1 */
+#define U8500_UART0_BASE	(U8500_PER1_BASE + 0x0000)
+#define U8500_UART1_BASE	(U8500_PER1_BASE + 0x1000)
+#define U8500_CLKRST1_BASE	(U8500_PER1_BASE + 0xf000)
+
+/* Last page of Boot ROM */
+#define U8500_BOOTROM_BASE      0x9001f000
+#define U8500_BOOTROM_ASIC_ID_OFFSET    0x0ff4
+
+#endif /* __ASM_ARCH_HARDWARE_H */