Add support for NetSilicon NS7520 processor.

Patch by Art Shipkowski, 12 May 2005

Cleanup.

1 files changed, 72 insertions, 77 deletions

diff --git a/include/configs/AP1000.h b/include/configs/AP1000.h
index d9c4b5bd6..c34d650aa 100644
--- a/include/configs/AP1000.h
+++ b/include/configs/AP1000.h
@@ -24,14 +24,14 @@
 
 #undef DEBUG
 
-#define CONFIG_405  1      /* This is a PPC405 CPU     */
-#define CONFIG_4xx  1      /* ...member of PPC4xx family   */
+#define CONFIG_405  1	   /* This is a PPC405 CPU     */
+#define CONFIG_4xx  1	   /* ...member of PPC4xx family   */
 
 #define CONFIG_AP1000  1   /* ...on an AP1000 board    */
 
 #define CONFIG_PCI 1
 
-#define CFG_HUSH_PARSER		1	/* use "hush" command parser    */
+#define CFG_HUSH_PARSER		1	/* use "hush" command parser	*/
 #define CFG_PROMPT			"0> "
 #define CFG_PROMPT_HUSH_PS2	"> "
 
@@ -39,7 +39,7 @@
 #define CONFIG_COMMAND_HISTORY 1
 #define CONFIG_COMPLETE_ADDRESSES 1
 
-#define CFG_ENV_IS_IN_FLASH     1
+#define CFG_ENV_IS_IN_FLASH	1
 #define CFG_FLASH_USE_BUFFER_WRITE
 
 #ifdef CFG_ENV_IS_IN_NVRAM
@@ -50,39 +50,37 @@
 #endif
 #endif
 
-#define CONFIG_BAUDRATE     57600
+#define CONFIG_BAUDRATE	    57600
 #define CONFIG_BOOTDELAY    3  /* autoboot after 3 seconds */
 
-#define CONFIG_BOOTCOMMAND  ""      /* autoboot command */
+#define CONFIG_BOOTCOMMAND  ""	    /* autoboot command */
 
 /* Size (bytes) of interrupt driven serial port buffer.
  * Set to 0 to use polling instead of interrupts.
  * Setting to 0 will also disable RTS/CTS handshaking.
  */
-#undef  CONFIG_SERIAL_SOFTWARE_FIFO
+#undef	CONFIG_SERIAL_SOFTWARE_FIFO
 
-#define CONFIG_BOOTARGS     "console=ttyS0,57600"
+#define CONFIG_BOOTARGS	    "console=ttyS0,57600"
 
-#define CONFIG_LOADS_ECHO   1   /* echo on for serial download  */
-#define CFG_LOADS_BAUD_CHANGE   1   /* allow baudrate change    */
+#define CONFIG_LOADS_ECHO   1	/* echo on for serial download	*/
+#define CFG_LOADS_BAUD_CHANGE	1   /* allow baudrate change	*/
 
-
-
-#define CONFIG_COMMANDS        ( (CONFIG_CMD_DFL & \
-                (~CFG_CMD_RTC) & ~(CFG_CMD_I2C)) | \
-                CFG_CMD_IRQ | \
-                CFG_CMD_PCI | \
-                CFG_CMD_DHCP | \
-                CFG_CMD_ASKENV | \
-                CFG_CMD_ELF  | \
-                CFG_CMD_PING | \
-                CFG_CMD_MVENV  \
-                               )
+#define CONFIG_COMMANDS	       ( (CONFIG_CMD_DFL & \
+		(~CFG_CMD_RTC) & ~(CFG_CMD_I2C)) | \
+		CFG_CMD_IRQ | \
+		CFG_CMD_PCI | \
+		CFG_CMD_DHCP | \
+		CFG_CMD_ASKENV | \
+		CFG_CMD_ELF  | \
+		CFG_CMD_PING | \
+		CFG_CMD_MVENV  \
+			       )
 
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>
 
-#undef CONFIG_WATCHDOG          /* watchdog disabled        */
+#undef CONFIG_WATCHDOG		/* watchdog disabled	    */
 
 #define CONFIG_SYS_CLK_FREQ 30000000
 
@@ -91,20 +89,20 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP            /* undef to save memory     */
+#define CFG_LONGHELP		/* undef to save memory	    */
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#define CFG_CBSIZE  1024        /* Console I/O Buffer Size  */
+#define CFG_CBSIZE  1024	/* Console I/O Buffer Size  */
 #else
-#define CFG_CBSIZE  256     /* Console I/O Buffer Size  */
+#define CFG_CBSIZE  256	    /* Console I/O Buffer Size	*/
 #endif
 /* usually: (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) */
 #define CFG_PBSIZE (CFG_CBSIZE+4+16) /* Print Buffer Size */
-#define CFG_MAXARGS 16      /* max number of command args   */
-#define CFG_BARGSIZE    CFG_CBSIZE  /* Boot Argument Buffer Size    */
+#define CFG_MAXARGS 16	    /* max number of command args   */
+#define CFG_BARGSIZE	CFG_CBSIZE  /* Boot Argument Buffer Size    */
 
-#define CFG_ALT_MEMTEST     1
-#define CFG_MEMTEST_START   0x00400000  /* memtest works on */
-#define CFG_MEMTEST_END     0x01000000  /* 4 ... 16 MB in DRAM  */
+#define CFG_ALT_MEMTEST	    1
+#define CFG_MEMTEST_START   0x00400000	/* memtest works on */
+#define CFG_MEMTEST_END	    0x01000000	/* 4 ... 16 MB in DRAM	*/
 
 /*
  * If CFG_EXT_SERIAL_CLOCK, then the UART divisor is 1.
@@ -115,86 +113,84 @@
  * If CFG_405_UART_ERRATA_59 and 200MHz CPU clock,
  * set Linux BASE_BAUD to 403200.
  */
-#undef  CFG_EXT_SERIAL_CLOCK           /* external serial clock */
-#undef  CFG_405_UART_ERRATA_59         /* 405GP/CR Rev. D silicon */
+#undef	CFG_EXT_SERIAL_CLOCK	       /* external serial clock */
+#undef	CFG_405_UART_ERRATA_59	       /* 405GP/CR Rev. D silicon */
 
-#define CFG_NS16550_CLK     40000000
-#define CFG_DUART_CHAN      0
+#define CFG_NS16550_CLK	    40000000
+#define CFG_DUART_CHAN	    0
 #define CFG_NS16550_COM1    (0x4C000000 + 0x1000)
 #define CFG_NS16550_COM2    (0x4C800000 + 0x1000)
 #define CFG_NS16550_REG_SIZE 4
 #define CFG_NS16550 1
-#define CFG_INIT_CHAN1   1
-#define CFG_INIT_CHAN2   0
+#define CFG_INIT_CHAN1	 1
+#define CFG_INIT_CHAN2	 0
 
 /* The following table includes the supported baudrates */
 #define CFG_BAUDRATE_TABLE  \
     {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
 
-#define CFG_LOAD_ADDR       0x00100000  /* default load address */
-#define CFG_EXTBDINFO       1   /* To use extended board_into (bd_t) */
-
-#define CFG_HZ      1000        /* decrementer freq: 1 ms ticks */
-
+#define CFG_LOAD_ADDR	    0x00100000	/* default load address */
+#define CFG_EXTBDINFO	    1	/* To use extended board_into (bd_t) */
 
+#define CFG_HZ	    1000	/* decrementer freq: 1 ms ticks */
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
  * Please note that CFG_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE      0x00000000
-#define CFG_FLASH_BASE      0x20000000
+#define CFG_SDRAM_BASE	    0x00000000
+#define CFG_FLASH_BASE	    0x20000000
 #define CFG_MONITOR_BASE    TEXT_BASE
-#define CFG_MONITOR_LEN     (192 * 1024)    /* Reserve 196 kB for Monitor   */
-#define CFG_MALLOC_LEN      (128 * 1024)    /* Reserve 128 kB for malloc()  */
+#define CFG_MONITOR_LEN	    (192 * 1024)    /* Reserve 196 kB for Monitor   */
+#define CFG_MALLOC_LEN	    (128 * 1024)    /* Reserve 128 kB for malloc()  */
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ       (8 << 20)   /* Initial Memory map for Linux */
+#define CFG_BOOTMAPSZ	    (8 << 20)	/* Initial Memory map for Linux */
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_FLASH_CFI       1
+#define CFG_FLASH_CFI	    1
 #define CFG_PROGFLASH_BASE  CFG_FLASH_BASE
 #define CFG_CONFFLASH_BASE  0x24000000
 
-#define CFG_MAX_FLASH_BANKS 2   /* max number of memory banks       */
-#define CFG_MAX_FLASH_SECT  256 /* max number of sectors on one chip    */
+#define CFG_MAX_FLASH_BANKS 2	/* max number of memory banks	    */
+#define CFG_MAX_FLASH_SECT  256 /* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT    120000  /* Timeout for Flash Erase (in ms)  */
-#define CFG_FLASH_WRITE_TOUT    500 /* Timeout for Flash Write (in ms)  */
+#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)  */
+#define CFG_FLASH_WRITE_TOUT	500 /* Timeout for Flash Write (in ms)	*/
 
-#define CFG_FLASH_PROTECTION    1   /* use hardware protection      */
+#define CFG_FLASH_PROTECTION	1   /* use hardware protection	    */
 
 /* BEG ENVIRONNEMENT FLASH */
 #ifdef CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_OFFSET      0x00040000 /* Offset of Environment Sector  */
-#define CFG_ENV_SIZE        0x1000  /* Total Size of Environment Sector */
+#define CFG_ENV_OFFSET	    0x00040000 /* Offset of Environment Sector	*/
+#define CFG_ENV_SIZE	    0x1000  /* Total Size of Environment Sector */
 #define CFG_ENV_SECT_SIZE   0x20000 /* see README - env sector total size   */
 #endif
 /* END ENVIRONNEMENT FLASH */
 /*-----------------------------------------------------------------------
  * NVRAM organization
  */
-#define CFG_NVRAM_BASE_ADDR 0xf0000000  /* NVRAM base address   */
-#define CFG_NVRAM_SIZE      0x1ff8      /* NVRAM size   */
+#define CFG_NVRAM_BASE_ADDR 0xf0000000	/* NVRAM base address	*/
+#define CFG_NVRAM_SIZE	    0x1ff8	/* NVRAM size	*/
 
 #ifdef CFG_ENV_IS_IN_NVRAM
-#define CFG_ENV_SIZE        0x1000      /* Size of Environment vars */
-#define CFG_ENV_ADDR        \
-    (CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE)   /* Env  */
+#define CFG_ENV_SIZE	    0x1000	/* Size of Environment vars */
+#define CFG_ENV_ADDR	    \
+    (CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE)	/* Env	*/
 #endif
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_DCACHE_SIZE     16384
+#define CFG_DCACHE_SIZE	    16384
 #define CFG_CACHELINE_SIZE  32
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT 5   /* log base 2 of the above value    */
+#define CFG_CACHELINE_SHIFT 5	/* log base 2 of the above value    */
 #endif
 
 /*
@@ -203,9 +199,8 @@
  * BR0/1 and OR0/1 (FLASH)
  */
 
-#define FLASH_BASE0_PRELIM  CFG_FLASH_BASE  /* FLASH bank #0    */
-#define FLASH_BASE1_PRELIM  0       /* FLASH bank #1    */
-
+#define FLASH_BASE0_PRELIM  CFG_FLASH_BASE  /* FLASH bank #0	*/
+#define FLASH_BASE1_PRELIM  0	    /* FLASH bank #1	*/
 
 /* Configuration Port location */
 #define CONFIG_PORT_ADDR    0xF0000500
@@ -214,29 +209,29 @@
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
 
-#define CFG_INIT_RAM_ADDR       0x400000  /* inside of SDRAM                     */
-#define CFG_INIT_RAM_END        0x2000  /* End of used area in RAM             */
+#define CFG_INIT_RAM_ADDR	0x400000  /* inside of SDRAM			 */
+#define CFG_INIT_RAM_END	0x2000	/* End of used area in RAM	       */
 #define CFG_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
 #define CFG_GBL_DATA_OFFSET    (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET      CFG_GBL_DATA_OFFSET
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Definitions for Serial Presence Detect EEPROM address
  * (to get SDRAM settings)
  */
-#define SPD_EEPROM_ADDRESS      0x50
+#define SPD_EEPROM_ADDRESS	0x50
 
 /*
  * Internal Definitions
  *
  * Boot Flags
  */
-#define BOOTFLAG_COLD   0x01        /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM   0x02        /* Software reboot          */
+#define BOOTFLAG_COLD	0x01	    /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM	0x02	    /* Software reboot		*/
 
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX   2   /* which serial port to use */
+#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2   /* which serial port to use */
 #endif
 
 /* JFFS2 stuff */
@@ -248,8 +243,8 @@
 #define CONFIG_NET_MULTI
 #define CONFIG_E1000
 
-#define CFG_ETH_DEV_FN     0x0800
-#define CFG_ETH_IOBASE     0x31000000
-#define CFG_ETH_MEMBASE    0x32000000
+#define CFG_ETH_DEV_FN	   0x0800
+#define CFG_ETH_IOBASE	   0x31000000
+#define CFG_ETH_MEMBASE	   0x32000000
 
-#endif  /* __CONFIG_H */
+#endif	/* __CONFIG_H */