* Patch by Andrea Scian, 17 Feb 2004:

  Add support for S3C44B0 processor and DAVE B2 board

* Patch by Steven Scholz, 20 Feb 2004:
  - Add support for MII commands on AT91RM9200 boards
  - some cleanup in AT91RM9200 ethernet code

1 files changed, 209 insertions, 0 deletions

diff --git a/include/configs/B2.h b/include/configs/B2.h
new file mode 100644
index 000000000..2fc97b27c
--- /dev/null
+++ b/include/configs/B2.h
@@ -0,0 +1,209 @@
+/*
+ * (C) Copyright 2004
+ * DAVE Srl
+ *
+ * http://www.dave-tech.it
+ * http://www.wawnet.biz
+ * mailto:info@wawnet.biz
+ *
+ * Configuation settings for the B2 board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * If we are developing, we might want to start armboot from ram
+ * so we MUST NOT initialize critical regs like mem-timing ...
+ */
+#define CONFIG_INIT_CRITICAL            /* undef for developing */
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_ARM7			1	/* This is a ARM7 CPU	*/
+#define CONFIG_B2			1	/* on an B2 Board      */
+#define CONFIG_ARM_THUMB	1	/* this is an ARM7TDMI */
+#undef  CONFIG_ARM7_REVD	 	/* disable ARM720 REV.D Workarounds */
+
+#define CONFIG_S3C44B0_CLOCK_SPEED	75 /* we have a 75Mhz S3C44B0*/
+
+
+#undef CONFIG_USE_IRQ			/* don't need them anymore */
+
+
+/*
+ * Size of malloc() pool
+ */
+#define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Monitor	*/
+#define CFG_ENV_SIZE		1024		/* 1024 bytes may be used for env vars*/
+#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 128*1024 )
+#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_DRIVER_LAN91C96
+#define CONFIG_LAN91C96_BASE		0x04000300 /* base address         */
+#define CONFIG_SMC_USE_32_BIT
+#undef  CONFIG_SHOW_ACTIVITY
+#define CONFIG_NET_RETRY_COUNT		10	   /* # of retries          */
+
+/*
+ * select serial console configuration
+ */
+#define CONFIG_SERIAL1		1	/* we use Serial line 1 */
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_BAUDRATE		115200
+
+#define CONFIG_BOOTP_MASK       (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE)
+
+#define CONFIG_COMMANDS		( CONFIG_CMD_DFL | \
+								CFG_CMD_DATE | \
+								CFG_CMD_ELF	| \
+								CFG_CMD_EEPROM	| \
+								CFG_CMD_I2C	)
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#define CONFIG_BOOTDELAY	5
+#define CONFIG_ETHADDR	00:50:c2:1e:af:fb
+#define CONFIG_BOOTARGS  "setenv bootargs root=/dev/ram ip=192.168.0.70:::::eth0:off \
+							 ether=25,0,0,0,eth0 ethaddr=00:50:c2:1e:af:fb"
+#define CONFIG_NETMASK  255.255.0.0
+#define CONFIG_IPADDR   192.168.0.70
+#define CONFIG_SERVERIP	192.168.0.23
+#define CONFIG_BOOTFILE	"B2-rootfs/usr/B2-zImage.u-boot"
+#define CONFIG_BOOTCOMMAND	"bootm 20000 f0000"
+
+/*
+ * Miscellaneous configurable options
+ */
+#define	CFG_LONGHELP				/* undef to save memory		*/
+#define	CFG_PROMPT		"=>  "	/* Monitor Command Prompt	*/
+#define	CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define	CFG_MAXARGS		16		/* max number of command args	*/
+#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+
+#define CFG_MEMTEST_START	0x0C400000	/* memtest works on	*/
+#define CFG_MEMTEST_END		0x0C800000	/* 4 ... 8 MB in DRAM	*/
+
+#undef  CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+
+#define	CFG_LOAD_ADDR		0x0c700000	/* default load address	*/
+
+#define	CFG_HZ				1000		/* 1 kHz */
+
+						/* valid baudrates */
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+/*-----------------------------------------------------------------------
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE	(128*1024)	/* regular stack */
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ	(4*1024)	/* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ	(4*1024)	/* FIQ stack */
+#endif
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS	1	   /* we have 1 banks of DRAM */
+#define PHYS_SDRAM_1		0xc0000000 /* SDRAM Bank #1 */
+#define PHYS_SDRAM_1_SIZE	0x01000000 /* 16 MB */
+
+#define PHYS_FLASH_1		0x00000000 /* Flash Bank #1 */
+#define PHYS_FLASH_SIZE		0x00400000 /* 4 MB */
+
+#define CFG_FLASH_BASE		PHYS_FLASH_1
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
+
+#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CFG_FLASH_WRITE_TOUT	1000	/* Timeout for Flash Write (in ms)	*/
+
+#define CFG_FLASH_WORD_SIZE	unsigned short	/* flash word size (width)	*/
+#define CFG_FLASH_ADDR0		0x5555	/* 1st address for flash config cycles	*/
+#define CFG_FLASH_ADDR1		0x2AAA	/* 2nd address for flash config cycles	*/
+/*
+ * The following defines are added for buggy IOP480 byte interface.
+ * All other boards should use the standard values (CPCI405 etc.)
+ */
+#define CFG_FLASH_READ0		0x0000	/* 0 is standard			*/
+#define CFG_FLASH_READ1		0x0001	/* 1 is standard			*/
+#define CFG_FLASH_READ2		0x0002	/* 2 is standard			*/
+
+#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+
+/*-----------------------------------------------------------------------
+ * Environment Variable setup
+ */
+#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
+#define CFG_ENV_OFFSET		0x0	/* environment starts at the beginning of the EEPROM */
+
+/*-----------------------------------------------------------------------
+ * I2C EEPROM (STM24C02W6) for environment
+ */
+#define CONFIG_HARD_I2C			/* I2c with hardware support */
+#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CFG_I2C_SLAVE		0xFE
+
+#define CFG_I2C_EEPROM_ADDR	0xA8	/* EEPROM STM24C02W6		*/
+#define CFG_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
+/* mask of address bits that overflow into the "EEPROM chip address"	*/
+/*#define CFG_I2C_EEPROM_ADDR_OVERFLOW	0x07*/
+#define CFG_EEPROM_PAGE_WRITE_BITS 4	/* The Catalyst CAT24WC08 has	*/
+					/* 16 byte page write mode using*/
+					/* last 4 bits of the address	*/
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
+#define CFG_EEPROM_PAGE_WRITE_ENABLE
+
+/* Flash banks JFFS2 should use */
+/*
+#define CFG_JFFS2_FIRST_BANK    0
+#define CFG_JFFS2_FIRST_SECTOR	2
+#define CFG_JFFS2_NUM_BANKS     1
+*/
+
+/*
+	Linux TAGs (see lib_arm/armlinux.c)
+*/
+#define CONFIG_CMDLINE_TAG
+#undef CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+
+#endif	/* __CONFIG_H */