diff options
| author | wdenk <wdenk> | 2004-12-31 09:32:47 +0000 |
|---|---|---|
| committer | wdenk <wdenk> | 2004-12-31 09:32:47 +0000 |
| commit | e2ffd59b4d93c9149de1caaa087371b0cfc512c9 (patch) | |
| tree | 86cfb6e30bec1686253b0542d76f57c5d62d183a /include/configs/CPC45.h | |
| parent | 400ab719c6025c176c50bcdff342384222d7424b (diff) | |
* Code cleanup, mostly for GCC-3.3.x
* Cleanup confusing use of CONFIG_ETH*ADDR - ust his only to
pre-define a MAC address; use CONFIG_HAS_ETH* to enable support for
additional ethernet addresses.
* Cleanup drivers/i82365.c - avoid duplication of code
* Fix bogus "cannot span across banks" flash error message
* Add support for CompactFlash for the CPC45 Board.
Diffstat (limited to 'include/configs/CPC45.h')
| -rw-r--r-- | include/configs/CPC45.h | 49 |
1 files changed, 46 insertions, 3 deletions
diff --git a/include/configs/CPC45.h b/include/configs/CPC45.h index 5a0013377..8de981981 100644 --- a/include/configs/CPC45.h +++ b/include/configs/CPC45.h @@ -50,8 +50,6 @@ #define CONFIG_BAUDRATE 9600 #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } -#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */ - #define CONFIG_PREBOOT "echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo" #define CONFIG_BOOTDELAY 5 @@ -63,7 +61,10 @@ CFG_CMD_DATE | \ CFG_CMD_DHCP | \ CFG_CMD_EEPROM | \ + CFG_CMD_FAT | \ + CFG_CMD_FLASH | \ CFG_CMD_I2C | \ + CFG_CMD_IDE | \ CFG_CMD_PCI | \ CFG_CMD_SDRAM ) @@ -344,7 +345,7 @@ #define ST16552_B_BASE 0x80400000 /* ST16552 channel A */ #define BCSR_BASE 0x80600000 /* board control / status registers */ #define DISPLAY_BASE 0x80600040 /* DISPLAY base */ -#define PCMCIA_MEM_BASE 0x81000000 /* PCMCIA memory window base */ +#define PCMCIA_MEM_BASE 0x83000000 /* PCMCIA memory window base */ #define PCMCIA_IO_BASE 0xFE000000 /* PCMCIA IO window base */ @@ -464,4 +465,46 @@ #define PCI_ENET0_MEMADDR 0x82000000 #define PCI_PLX9030_IOADDR 0x82100000 #define PCI_PLX9030_MEMADDR 0x82100000 + +/*----------------------------------------------------------------------- + * PCMCIA stuff + *----------------------------------------------------------------------- + */ + +#define CONFIG_I82365 + +#define CFG_PCMCIA_MEM_ADDR PCMCIA_MEM_BASE +#define CFG_PCMCIA_MEM_SIZE 0x1000 + +#define CONFIG_PCMCIA_SLOT_A + +/*----------------------------------------------------------------------- + * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter) + *----------------------------------------------------------------------- + */ + +#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ + +#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ +#undef CONFIG_IDE_RESET /* reset for IDE not supported */ +#define CONFIG_IDE_LED /* LED for IDE is supported */ + +#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */ +#define CFG_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ + +#define CFG_ATA_IDE0_OFFSET 0x0000 +#define CONFIG_HMI10 + +#define CFG_ATA_BASE_ADDR CFG_PCMCIA_MEM_ADDR + +#define CFG_ATA_DATA_OFFSET CFG_PCMCIA_MEM_SIZE + +/* Offset for normal register accesses */ +#define CFG_ATA_REG_OFFSET CFG_PCMCIA_MEM_SIZE + +/* Offset for alternate registers */ +#define CFG_ATA_ALT_OFFSET (CFG_PCMCIA_MEM_SIZE + 0x400) + +#define CONFIG_DOS_PARTITION + #endif /* __CONFIG_H */ |