ppc4xx: Add initial AMCC Kilauea 405EX support

Signed-off-by: Stefan Roese <sr@denx.de>

1 files changed, 486 insertions, 0 deletions

diff --git a/include/configs/kilauea.h b/include/configs/kilauea.h
new file mode 100644
index 000000000..7858f8319
--- /dev/null
+++ b/include/configs/kilauea.h
@@ -0,0 +1,486 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/************************************************************************
+ * kilauea.h - configuration for AMCC Kilauea (405EX)
+ ***********************************************************************/
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*-----------------------------------------------------------------------
+ * High Level Configuration Options
+ *----------------------------------------------------------------------*/
+#define CONFIG_KILAUEA		1		/* Board is Kilauea	*/
+#define CONFIG_4xx		1		/* ... PPC4xx family	*/
+#define CONFIG_405EX		1		/* Specifc 405EX support*/
+#define CONFIG_SYS_CLK_FREQ	33333333	/* ext frequency to pll	*/
+
+#define CONFIG_BOARD_EARLY_INIT_F 1		/* Call board_early_init_f */
+#define CONFIG_MISC_INIT_R	1		/* Call misc_init_r	*/
+
+/*-----------------------------------------------------------------------
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ *----------------------------------------------------------------------*/
+#define CFG_SDRAM_BASE		0x00000000
+#define CFG_FLASH_BASE		0xFC000000
+#define CFG_NAND_ADDR		0xF8000000
+#define CFG_FPGA_BASE		0xF0000000
+#define CFG_PERIPHERAL_BASE	0xEF600000      /* internal peripherals*/
+#define CFG_MONITOR_LEN		(384 * 1024)	/* Reserve 384 kB for Monitor	*/
+#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/
+#define CFG_MONITOR_BASE	(TEXT_BASE)
+
+/*-----------------------------------------------------------------------
+ * Initial RAM & stack pointer
+ *----------------------------------------------------------------------*/
+#define CFG_INIT_RAM_ADDR	0x02000000	/* inside of SDRAM	*/
+#define CFG_INIT_RAM_END	(4 << 10)
+#define CFG_GBL_DATA_SIZE	256		/* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+/* reserve some memory for POST and BOOT limit info */
+#define CFG_INIT_SP_OFFSET	(CFG_GBL_DATA_OFFSET - 16)
+
+/* extra data in init-ram */
+#define CFG_POST_WORD_ADDR	(CFG_GBL_DATA_OFFSET - 4)
+#define CFG_POST_MAGIC		(CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET - 8)
+#define CFG_POST_VAL		(CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET - 12)
+#define CFG_OCM_DATA_ADDR	CFG_INIT_RAM_ADDR /* for commproc.c	*/
+
+/*-----------------------------------------------------------------------
+ * Serial Port
+ *----------------------------------------------------------------------*/
+#define CFG_EXT_SERIAL_CLOCK	11059200	/* ext. 11.059MHz clk	*/
+#define CONFIG_BAUDRATE		115200
+#define CONFIG_SERIAL_MULTI     1
+/* define this if you want console on UART1 */
+#undef CONFIG_UART1_CONSOLE
+
+#define CFG_BAUDRATE_TABLE						\
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+/*-----------------------------------------------------------------------
+ * Environment
+ *----------------------------------------------------------------------*/
+#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+#define CFG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
+#else
+#define CFG_ENV_IS_IN_NAND	1	/* use NAND for environment vars	*/
+#define CFG_ENV_IS_EMBEDDED	1	/* use embedded environment */
+#endif
+
+/*-----------------------------------------------------------------------
+ * FLASH related
+ *----------------------------------------------------------------------*/
+#define CFG_FLASH_CFI			/* The flash is CFI compatible	*/
+#define CFG_FLASH_CFI_DRIVER		/* Use common CFI driver	*/
+
+#define CFG_FLASH_BANKS_LIST    {CFG_FLASH_BASE}
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CFG_MAX_FLASH_SECT	512	/* max number of sectors on one chip	*/
+
+#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+
+#define CFG_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
+#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+
+#ifdef CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_SECT_SIZE	0x20000 	/* size of one complete sector	*/
+#define CFG_ENV_ADDR		(CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
+#define	CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
+
+/* Address and size of Redundant Environment Sector	*/
+#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#endif /* CFG_ENV_IS_IN_FLASH */
+
+/*-----------------------------------------------------------------------
+ * DDR SDRAM
+ *----------------------------------------------------------------------*/
+#define CFG_MBYTES_SDRAM        (256)		/* 256MB			*/
+
+/*-----------------------------------------------------------------------
+ * I2C
+ *----------------------------------------------------------------------*/
+#define CONFIG_HARD_I2C		1	/* I2C with hardware support	*/
+#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CFG_I2C_SLAVE		0x7F
+
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	6	/* 24C02 requires 5ms delay */
+#define CFG_I2C_EEPROM_ADDR	0x52	/* I2C boot EEPROM (24C02BN)	*/
+#define CFG_I2C_EEPROM_ADDR_LEN	1	/* Bytes of address		*/
+
+/* Standard DTT sensor configuration */
+#define CONFIG_DTT_DS1775	1
+#define CONFIG_DTT_SENSORS	{ 0 }
+#define CFG_I2C_DTT_ADDR	0x48
+
+/* RTC configuration */
+#define CONFIG_RTC_DS1338	1
+#define CFG_I2C_RTC_ADDR	0x68
+
+/*-----------------------------------------------------------------------
+ * Ethernet
+ *----------------------------------------------------------------------*/
+#define CONFIG_M88E1111_PHY	1
+#define CONFIG_IBM_EMAC4_V4	1
+#define CONFIG_MII		1	/* MII PHY management		*/
+#define CONFIG_PHY_ADDR		1	/* PHY address, See schematics	*/
+
+#define CONFIG_PHY_RESET	1	/* reset phy upon startup	*/
+#define CONFIG_PHY_GIGE		1	/* Include GbE speed/duplex detection */
+
+#define CONFIG_HAS_ETH0		1
+
+#define CONFIG_NET_MULTI	1
+#define CONFIG_HAS_ETH1		1	/* add support for "eth1addr"   */
+#define CONFIG_PHY1_ADDR	2
+
+#define CFG_RX_ETH_BUFFER	32	/* Number of ethernet rx buffers & descriptors */
+
+#define CONFIG_PREBOOT	"echo;"	\
+	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+	"echo"
+
+#undef	CONFIG_BOOTARGS
+
+#undef USE_LIBFDT
+#ifdef USE_LIBFDT
+/*
+ * LIBFDT support is disabled for now since first Linux port is still
+ * arch/ppc.
+ */
+#define	CONFIG_EXTRA_ENV_SETTINGS					\
+	"logversion=2\0"						\
+	"netdev=eth0\0"							\
+	"hostname=kilauea\0"						\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
+		"nfsroot=${serverip}:${rootpath}\0"			\
+	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
+	"addip=setenv bootargs ${bootargs} "				\
+		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
+		":${hostname}:${netdev}:off panic=1\0"			\
+	"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
+	"net_nfs=tftp 200000 ${bootfile};"				\
+		"tftp ${fdt_addr} ${fdt_file};"				\
+		"run nfsargs addip addtty;"				\
+		"bootm 200000 - ${fdt_addr}\0"				\
+	"flash_nfs=run nfsargs addip addtty;"				\
+		"bootm ${kernel_addr}\0"				\
+	"flash_self=run ramargs addip addtty;"				\
+		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
+	"rootpath=/opt/eldk/ppc_4xx\0"					\
+	"bootfile=kilauea/uImage\0"					\
+	"fdt_file=kilauea/kilauea.dtb\0"				\
+	"fdt_addr=400000\0"						\
+	"kernel_addr=fc000000\0"					\
+	"ramdisk_addr=fc200000\0"					\
+	"initrd_high=30000000\0"					\
+	"load=tftp 200000 kilauea/u-boot.bin\0"				\
+	"update=protect off fffa0000 ffffffff;era fffa0000 ffffffff;"	\
+		"cp.b ${fileaddr} fffa0000 ${filesize};"		\
+		"setenv filesize;saveenv\0"				\
+	"upd=run load update\0"						\
+	"nload=tftp 200000 kilauea/u-boot-nand.bin\0"			\
+	"nupdate=nand erase 0 60000;nand write 200000 0 60000;"		\
+		"setenv filesize;saveenv\0"				\
+	"nupd=run nload nupdate\0"					\
+	""
+#else
+#define	CONFIG_EXTRA_ENV_SETTINGS					\
+	"logversion=2\0"						\
+	"netdev=eth0\0"							\
+	"hostname=kilauea\0"						\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
+		"nfsroot=${serverip}:${rootpath}\0"			\
+	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
+	"addip=setenv bootargs ${bootargs} "				\
+		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
+		":${hostname}:${netdev}:off panic=1\0"			\
+	"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
+	"net_nfs=tftp 200000 ${bootfile};"				\
+		"run nfsargs addip addtty;"				\
+		"bootm 200000\0"					\
+	"flash_nfs=run nfsargs addip addtty;"				\
+		"bootm ${kernel_addr}\0"				\
+	"flash_self=run ramargs addip addtty;"				\
+		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
+	"rootpath=/opt/eldk/ppc_4xx\0"					\
+	"bootfile=kilauea/uImage\0"					\
+	"kernel_addr=fc000000\0"					\
+	"ramdisk_addr=fc200000\0"					\
+	"initrd_high=30000000\0"					\
+	"load=tftp 200000 kilauea/u-boot.bin\0"				\
+	"update=protect off fffa0000 ffffffff;era fffa0000 ffffffff;"	\
+		"cp.b ${fileaddr} fffa0000 ${filesize};"		\
+		"setenv filesize;saveenv\0"				\
+	"upd=run load update\0"						\
+	"nload=tftp 200000 kilauea/u-boot-nand.bin\0"			\
+	"nupdate=nand erase 0 60000;nand write 200000 0 60000;"		\
+		"setenv filesize;saveenv\0"				\
+	"nupd=run nload nupdate\0"					\
+	"pciconfighost=1\0"						\
+	""
+#endif
+#define CONFIG_BOOTCOMMAND	"run flash_self"
+
+#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
+
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
+#define CFG_LOADS_BAUD_CHANGE		/* allow baudrate change	*/
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_DTT
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_LOG
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+
+/* POST support */
+#define CONFIG_POST		(CFG_POST_MEMORY	| \
+				 CFG_POST_CACHE		| \
+				 CFG_POST_CPU		| \
+				 CFG_POST_ETHER		| \
+				 CFG_POST_I2C		| \
+				 CFG_POST_MEMORY	| \
+				 CFG_POST_UART)
+
+/* Define here the base-addresses of the UARTs to test in POST */
+#define CFG_POST_UART_TABLE	{UART0_BASE, UART1_BASE}
+
+#define CONFIG_LOGBUFFER
+#define CFG_POST_CACHE_ADDR	0x00800000 /* free virtual address	*/
+
+#define CFG_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */
+
+#undef CONFIG_WATCHDOG			/* watchdog disabled		*/
+
+/*-----------------------------------------------------------------------
+ * Miscellaneous configurable options
+ *----------------------------------------------------------------------*/
+#define CFG_LONGHELP			/* undef to save memory		*/
+#define CFG_PROMPT	        "=> "	/* Monitor Command Prompt	*/
+#if defined(CONFIG_CMD_KGDB)
+#define CFG_CBSIZE	        1024	/* Console I/O Buffer Size	*/
+#else
+#define CFG_CBSIZE	        256	/* Console I/O Buffer Size	*/
+#endif
+#define CFG_PBSIZE              (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS	        16	/* max number of command args	*/
+#define CFG_BARGSIZE	        CFG_CBSIZE /* Boot Argument Buffer Size	*/
+
+#define CFG_MEMTEST_START	0x0400000 /* memtest works on		*/
+#define CFG_MEMTEST_END		0x0C00000 /* 4 ... 12 MB in DRAM	*/
+
+#define CFG_LOAD_ADDR		0x100000  /* default load address	*/
+#define CFG_EXTBDINFO		1	/* To use extended board_into (bd_t) */
+
+#define CFG_HZ		        1000	/* decrementer freq: 1 ms ticks	*/
+
+#define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
+#define CONFIG_LOOPW            1       /* enable loopw command         */
+#define CONFIG_MX_CYCLIC        1       /* enable mdc/mwc commands      */
+#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *----------------------------------------------------------------------*/
+#define CONFIG_PCI			/* include pci support	        */
+#define CONFIG_PCI_PNP		1	/* do pci plug-and-play		*/
+#define CONFIG_PCI_SCAN_SHOW	1	/* show pci devices on startup	*/
+#define CONFIG_PCI_CONFIG_HOST_BRIDGE
+
+/*-----------------------------------------------------------------------
+ * PCIe stuff
+ *----------------------------------------------------------------------*/
+#define CFG_PCIE_MEMBASE	0x90000000	/* mapped PCIe memory	*/
+#define CFG_PCIE_MEMSIZE	0x08000000      /* 128 Meg, smallest incr per port */
+
+#define	CFG_PCIE0_CFGBASE	0xa0000000      /* remote access */
+#define	CFG_PCIE0_XCFGBASE	0xb0000000      /* local access */
+#define	CFG_PCIE0_CFGMASK	0xe0000001      /* 512 Meg */
+
+#define	CFG_PCIE1_CFGBASE	0xc0000000      /* remote access */
+#define	CFG_PCIE1_XCFGBASE	0xd0000000      /* local access */
+#define	CFG_PCIE1_CFGMASK	0xe0000001      /* 512 Meg */
+
+#define	CFG_PCIE0_UTLBASE	0xef502000
+#define	CFG_PCIE1_UTLBASE	0xef503000
+
+/* base address of inbound PCIe window */
+#define CFG_PCIE_INBOUND_BASE	0x0000000000000000ULL
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ *----------------------------------------------------------------------*/
+#define CFG_DCACHE_SIZE		(16 << 10) /* For IBM 405EX			*/
+#define CFG_CACHELINE_SIZE	32
+#if defined(CONFIG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
+#endif
+
+/*-----------------------------------------------------------------------
+ * External Bus Controller (EBC) Setup
+ *----------------------------------------------------------------------*/
+#define CFG_NAND_CS		1		/* NAND chip connected to CSx	*/
+
+/* Memory Bank 0 (NOR-FLASH) initialization					*/
+#define CFG_EBC_PB0AP		0x05806500
+#define CFG_EBC_PB0CR           0xFC0DA000  /* BAS=0xFC0,BS=64MB,BU=R/W,BW=16bit*/
+
+/* Memory Bank 1 (NAND-FLASH) initialization					*/
+#define CFG_EBC_PB1AP		0x018003c0
+#define CFG_EBC_PB1CR		(CFG_NAND_ADDR | 0x1e000)
+
+/* Memory Bank 2 (FPGA) initialization						*/
+#define CFG_EBC_PB2AP           0x9400C800
+#define CFG_EBC_PB2CR           0xF0018000 /*  BAS=0x800,BS=1MB,BU=R/W,BW=8bit	*/
+
+#define CFG_EBC_CFG		0x7FC00000 /*  EBC0_CFG */
+
+/*-----------------------------------------------------------------------
+ * NAND FLASH
+ *----------------------------------------------------------------------*/
+#define CFG_MAX_NAND_DEVICE	1
+#define NAND_MAX_CHIPS		1
+#define CFG_NAND_BASE		(CFG_NAND_ADDR + CFG_NAND_CS)
+#define CFG_NAND_SELECT_DEVICE  1	/* nand driver supports mutipl. chips	*/
+
+/*-----------------------------------------------------------------------
+ * GPIO Setup
+ *----------------------------------------------------------------------*/
+/*-----------------------------------------------------------------------
+ * Definitions for GPIO setup (PPC405EX specific)
+ *
+ * GPIO0[0-3]      - EBC data 0-3	inputs/outputs
+ * GPIO0[4-7]      - USB data 4-7	inputs/outputs
+ * GPIO0[8-11]     - NFCE# 1-3 inputs/outputs, GPIO11: IRQ6 inputs
+ * GPIO0[12-15]    - USB data 0-3	inputs/outputs
+ * GPIO0[16-21]    - UART0 control signal inputs/outputs
+ *
+ * GPIO0[22-25,27] - EBC control signal inputs/outputs
+ * GPIO0[26]	   - Instruction trace outputs
+ * GPIO0[28]	   - Float, N/C
+ * GPIO0[29-31]    - DMA control signal inputs/outputs
+ */
+#define CFG_GPIO0_OSRL		0x00AA54AA
+#define CFG_GPIO0_OSRH		0x21800000
+#define CFG_GPIO0_TSRL		0x00AA55AA
+#define CFG_GPIO0_TSRH		0xA5A00000
+
+#define CFG_GPIO0_ISR1L		0x00000100
+#define CFG_GPIO0_ISR1H		0x04000000
+#define CFG_GPIO0_ISR2L		0x00550055
+#define CFG_GPIO0_ISR2H		0x40100000
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
+#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
+#endif
+
+/*-----------------------------------------------------------------------
+ * Some Kilauea stuff..., mainly fpga registers
+ */
+#define CFG_FPGA_REG_BASE		CFG_FPGA_BASE
+#define CFG_FPGA_FIFO_BASE		(in32(CFG_FPGA_BASE) | (1 << 11))
+
+/* interrupt */
+#define CFG_FPGA_SLIC0_R_DPRAM_INT	0x80000000
+#define CFG_FPGA_SLIC0_W_DPRAM_INT	0x40000000
+#define CFG_FPGA_SLIC1_R_DPRAM_INT	0x20000000
+#define CFG_FPGA_SLIC1_W_DPRAM_INT	0x10000000
+#define CFG_FPGA_PHY0_INT		0x08000000
+#define CFG_FPGA_PHY1_INT		0x04000000
+#define CFG_FPGA_SLIC0_INT		0x02000000
+#define CFG_FPGA_SLIC1_INT		0x01000000
+
+/* DPRAM setting */
+/* 00: 32B; 01: 64B; 10: 128B; 11: 256B  */
+#define CFG_FPGA_DPRAM_R_INT_LINE	0x00400000	/* 64 B */
+#define CFG_FPGA_DPRAM_W_INT_LINE	0x00100000	/* 64 B */
+#define CFG_FPGA_DPRAM_RW_TYPE		0x00080000
+#define CFG_FPGA_DPRAM_RST		0x00040000
+#define CFG_FPGA_UART0_FO		0x00020000
+#define CFG_FPGA_UART1_FO		0x00010000
+
+/* loopback */
+#define CFG_FPGA_CHIPSIDE_LOOPBACK	0x00004000
+#define CFG_FPGA_LINESIDE_LOOPBACK	0x00008000
+#define CFG_FPGA_SLIC0_ENABLE		0x00002000
+#define CFG_FPGA_SLIC1_ENABLE		0x00001000
+#define CFG_FPGA_SLIC0_CS		0x00000800
+#define CFG_FPGA_SLIC1_CS		0x00000400
+#define CFG_FPGA_USER_LED0		0x00000200
+#define CFG_FPGA_USER_LED1		0x00000100
+
+#endif	/* __CONFIG_H */
+
+#ifdef USE_LIBFDT
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+
+#define OF_CPU			"PowerPC,405EX@0"
+#endif