arm nomadik: rename board to nhk8815

This is an error in my side in the initial submission: nobody
calls it ""nmdk8815", it's "nomadik hardware kit", nhk8815, instead.

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>

1 files changed, 168 insertions, 0 deletions

diff --git a/include/configs/nhk8815.h b/include/configs/nhk8815.h
new file mode 100644
index 000000000..df9d5235e
--- /dev/null
+++ b/include/configs/nhk8815.h
@@ -0,0 +1,168 @@
+/*
+ * (C) Copyright 2005
+ * STMicroelectronics.
+ * Configuration settings for the "Nomadik Hardware Kit" NHK-8815,
+ * the evaluation board for the Nomadik 8815 System on Chip.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <nomadik.h>
+
+#define CONFIG_ARM926EJS
+#define CONFIG_NOMADIK
+#define CONFIG_NOMADIK_8815
+#define CONFIG_NOMADIK_NDK15
+#define CONFIG_NOMADIK_NHK15
+
+#define CONFIG_SKIP_LOWLEVEL_INIT /* we have already been loaded to RAM */
+
+/* commands */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_NFS
+/* There is no NOR flash, so undefine these commands */
+#undef CONFIG_CMD_FLASH
+#undef CONFIG_CMD_IMLS
+#define CONFIG_SYS_NO_FLASH
+/* There is NAND storage */
+#define CONFIG_NAND_NOMADIK
+#define CONFIG_CMD_JFFS2
+
+/* user interface */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT		"Nomadik> "
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE \
+					+ sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE /* Boot Arg Buffer Size */
+#define CONFIG_SYS_MAXARGS	16
+#define CONFIG_SYS_LOAD_ADDR	0x800000	/* default load address */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE
+
+/* boot config */
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_BOOTDELAY	1
+#define CONFIG_BOOTARGS	"root=/dev/ram0 console=ttyAMA1,115200n8 init=linuxrc"
+#define CONFIG_BOOTCOMMAND	"fsload 0x100000 kernel.uimg;" \
+				" fsload 0x800000 initrd.gz.uimg;" \
+				" bootm 0x100000 0x800000"
+
+/* memory-related information */
+#define CONFIG_NR_DRAM_BANKS	2
+#define PHYS_SDRAM_1		0x00000000	/* DDR-SDRAM Bank #1 */
+#define PHYS_SDRAM_1_SIZE	0x04000000	/* 64 MB */
+#define PHYS_SDRAM_2		0x08000000	/* SDR-SDRAM BANK #2*/
+#define PHYS_SDRAM_2_SIZE	0x04000000	/* 64 MB */
+
+#define CONFIG_STACKSIZE	(128 * 1024)	/* regular stack */
+#ifdef CONFIG_USE_IRQ
+#  define CONFIG_STACKSIZE_IRQ	(4 * 1024)	/* IRQ stack */
+#  define CONFIG_STACKSIZE_FIQ	(4 * 1024)	/* FIQ stack */
+#endif
+
+#define CONFIG_SYS_MEMTEST_START	0x00000000
+#define CONFIG_SYS_MEMTEST_END		0x0FFFFFFF
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 256 * 1024)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* for initial data */
+
+#define CONFIG_MISC_INIT_R	/* call misc_init_r during start up */
+
+/* timing informazion */
+#define CONFIG_SYS_HZ		(2400000 / 256)	/* Timer0: 2.4Mhz + divider */
+#define CONFIG_SYS_TIMERBASE	0x101E2000
+
+/* serial port (PL011) configuration */
+#define CONFIG_PL011_SERIAL
+#define CONFIG_CONS_INDEX	1
+#define CONFIG_BAUDRATE		115200
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CFG_SERIAL0		0x101FD000
+#define CFG_SERIAL1		0x101FB000
+
+#define CONFIG_PL01x_PORTS	{ (void *)CFG_SERIAL0, (void *)CFG_SERIAL1 }
+#define CONFIG_PL011_CLOCK	48000000
+
+/* Ethernet */
+#define PCI_MEMORY_VADDR	0xe8000000
+#define PCI_IO_VADDR		0xee000000
+#define __io(a)			((void __iomem *)(PCI_IO_VADDR + (a)))
+#define __mem_isa(a)		((a) + PCI_MEMORY_VADDR)
+
+#define CONFIG_DRIVER_SMC91111	/* Using SMC91c111*/
+#define CONFIG_SMC91111_BASE	0x34000300
+#undef  CONFIG_SMC91111_EXT_PHY	/* Internal PHY */
+#define CONFIG_SMC_USE_32_BIT
+#define CONFIG_BOOTFILE		"uImage"
+
+/* flash memory and filesystem information */
+#define CONFIG_DOS_PARTITION
+#define CONFIG_MTD_ONENAND_VERIFY_WRITE
+#define CONFIG_SYS_ONENAND_BASE		0x30000000
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+#define CONFIG_SYS_NAND_BASE		0x40000000 /* SMPS0n */
+
+#ifdef CONFIG_BOOT_ONENAND
+
+#   define CONFIG_CMD_ONENAND /* Temporary: nand and onenand can't coexist */
+   /* Partition				Size	Start
+    * XloaderTOC + X-Loader		256KB	0x00000000
+    * Memory init function		256KB	0x00040000
+    * U-Boot				2MB	0x00080000
+    * Sysimage (kernel + ramdisk)	4MB	0x00280000
+    * JFFS2 Root filesystem		22MB	0x00680000
+    * JFFS2 User Data			227.5MB	0x01C80000
+    */
+#   define CONFIG_JFFS2_PART_SIZE	0x400000
+#   define CONFIG_JFFS2_PART_OFFSET	0x280000
+
+#   define CONFIG_ENV_IS_IN_ONENAND
+#   define CONFIG_ENV_SIZE		(256 * 1024)
+#   define CONFIG_ENV_ADDR		0x30300000
+
+#else /* ! CONFIG_BOOT_ONENAND */
+
+#   define CONFIG_CMD_NAND /* Temporary: nand and onenand can't coexist */
+
+#   define CONFIG_JFFS2_DEV		"nand0"
+#   define CONFIG_JFFS2_NAND		1 /* For the jffs2 support*/
+#   define CONFIG_JFFS2_PART_SIZE	0x00300000
+#   define CONFIG_JFFS2_PART_OFFSET	0x00280000
+
+#   define CONFIG_ENV_IS_IN_NAND
+#   define CONFIG_ENV_SIZE		0x20000 /* 128 Kb - one sector */
+#   define CONFIG_ENV_OFFSET		(0x8000000 - CONFIG_ENV_SIZE)
+
+#endif /* CONFIG_BOOT_ONENAND */
+
+/* this is needed to make hello_world.c and other stuff happy */
+#define CONFIG_SYS_MAX_FLASH_SECT	512
+#define CONFIG_SYS_MAX_FLASH_BANKS	1
+
+#endif /* __CONFIG_H */