* Add start-up delay to make sure power has stabilized before

  attempting to switch on USB on SX1 board.

* Patch by Josef Wagner, 18 Mar 2004:
  - Add support for MicroSys XM250 board (PXA255)
  - Add support for MicroSys PM828 board (MPC8280)
  - Add support for 32 MB Flash on PM825/826
  - new SDRAM refresh rate for PM825/PM826
  - added support for MicroSys PM520 (MPC5200)
  - replaced Query by Identify command in CPU86/flash.c
    to support 28F160F3B

* Fix wrap around problem with udelay() on ARM920T

* Add support for Macronix flash on TRAB board

1 files changed, 355 insertions, 0 deletions

diff --git a/include/configs/xm250.h b/include/configs/xm250.h
new file mode 100644
index 000000000..10f69d998
--- /dev/null
+++ b/include/configs/xm250.h
@@ -0,0 +1,355 @@
+/*
+ * (C) Copyright 2002
+ * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * If we are developing, we might want to start armboot from ram
+ * so we MUST NOT initialize critical regs like mem-timing ...
+ */
+#define CONFIG_INIT_CRITICAL		/* undef for developing */
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_PXA250	       1	/* This is an PXA250 CPU	*/
+#define CONFIG_XM250	       1	/* on a MicroSys XM250 Board	*/
+#undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff	*/
+
+/*
+ * Size of malloc() pool; this lives below the uppermost 128 KiB which are
+ * used for the RAM copy of the uboot code
+ *
+ */
+#define CFG_MALLOC_LEN		(256*1024)
+#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_DRIVER_SMC91111
+#define CONFIG_SMC91111_BASE		0x04000300
+#undef	CONFIG_SMC91111_EXT_PHY
+#define CONFIG_SMC_USE_32_BIT
+#undef	CONFIG_SHOW_ACTIVITY
+#define CONFIG_NET_RETRY_COUNT		10	   /* # of retries		*/
+
+/*
+ * I2C bus
+ */
+#define CONFIG_HARD_I2C			1
+#define CFG_I2C_SPEED			50000
+#define CFG_I2C_SLAVE			0xfe
+
+#define CONFIG_RTC_PCF8563		1
+#define CFG_I2C_RTC_ADDR		0x51
+
+#define CFG_I2C_EEPROM_ADDR		0x58	/* A0 = 0 (hardwired)		*/
+#define CFG_EEPROM_PAGE_WRITE_BITS	4	/* 4 bits = 16 octets		*/
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10	/* between stop and start	*/
+#define CFG_I2C_EEPROM_ADDR_LEN		1	/* length of address		*/
+#define CFG_EEPROM_SIZE			2048	/* size in bytes		*/
+#undef	CFG_I2C_INIT_BOARD			/* board has no own init	*/
+
+/*
+ * select serial console configuration
+ */
+#define CONFIG_FFUART	       1       /* we use FFUART */
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_BAUDRATE		115200
+
+#define CONFIG_COMMANDS		(CONFIG_CMD_DFL | \
+				 CFG_CMD_ELF	| \
+				 CFG_CMD_EEPROM | \
+				 CFG_CMD_DATE	| \
+				 CFG_CMD_I2C	)
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#define CONFIG_BOOTDELAY	3
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP				/* undef to save memory		*/
+#define CFG_PROMPT		"=> "		/* Monitor Command Prompt	*/
+#define CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS		16		/* max number of command args	*/
+#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+
+#define CFG_MEMTEST_START	0xa0400000	/* memtest works on		*/
+#define CFG_MEMTEST_END		0xa0800000	/* 4 ... 8 MB in DRAM		*/
+
+#undef	CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+
+#define CFG_LOAD_ADDR		0xa3000000	/* default load address */
+
+#define CFG_HZ			3686400		/* incrementer freq: 3.6864 MHz */
+#define CFG_CPUSPEED		0x161		/* set core clock to 400/400/100 MHz */
+
+						/* valid baudrates */
+
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+/*
+ * Definitions related to passing arguments to kernel.
+ */
+#define CONFIG_CMDLINE_TAG	     1	 /* send commandline to Kernel		*/
+#define CONFIG_SETUP_MEMORY_TAGS     1	 /* send memory definition to kernel	*/
+#undef	CONFIG_INITRD_TAG		 /* do not send initrd params		*/
+#undef	CONFIG_VFD			 /* do not send framebuffer setup	*/
+
+/*
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE	(128*1024)	/* regular stack */
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ	(4*1024)	/* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ	(4*1024)	/* FIQ stack */
+#endif
+
+/*
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS	4
+#define PHYS_SDRAM_1		0xa0000000 /* SDRAM Bank #1	*/
+#define PHYS_SDRAM_1_SIZE	0x04000000 /* 64 MB		*/
+#define PHYS_SDRAM_2		0xa4000000 /* SDRAM Bank #2	*/
+#define PHYS_SDRAM_2_SIZE	0x00000000 /* 0 MB		*/
+#define PHYS_SDRAM_3		0xa8000000 /* SDRAM Bank #3	*/
+#define PHYS_SDRAM_3_SIZE	0x00000000 /* 0 MB		*/
+#define PHYS_SDRAM_4		0xac000000 /* SDRAM Bank #4	*/
+#define PHYS_SDRAM_4_SIZE	0x00000000 /* 0 MB		*/
+
+#define PHYS_FLASH_1		0x00000000 /* Flash Bank #1	*/
+#define PHYS_FLASH_2		0x04000000 /* Flash Bank #1	*/
+#define PHYS_FLASH_SIZE		0x01000000 /* 16 MB		*/
+#define PHYS_FLASH_BANK_SIZE	0x01000000 /* 16 MB Banks	*/
+#define PHYS_FLASH_SECT_SIZE	0x00040000 /* 256 KB sectors (x2) */
+
+#define CFG_DRAM_BASE		0xa0000000
+#define CFG_DRAM_SIZE		0x04000000
+
+#define CFG_FLASH_BASE		PHYS_FLASH_1
+
+/*
+ * FLASH and environment organization
+ */
+#define CFG_MAX_FLASH_BANKS	1     /* max number of memory banks		*/
+#define CFG_MAX_FLASH_SECT	128   /* max number of sectors on one chip	*/
+
+/* timeout values are in ticks */
+#define CFG_FLASH_ERASE_TOUT	(2*CFG_HZ)	/* Timeout for Flash Erase	*/
+#define CFG_FLASH_WRITE_TOUT	(2*CFG_HZ)	/* Timeout for Flash Write	*/
+#define CFG_FLASH_LOCK_TOUT	(2*CFG_HZ)	/* Timeout for Flash Set Lock Bit */
+#define CFG_FLASH_UNLOCK_TOUT	(2*CFG_HZ)	/* Timeout for Flash Clear Lock Bits */
+#define CFG_FLASH_PROTECTION			/* "Real" (hardware) sectors protection */
+
+#define CFG_ENV_IS_IN_FLASH	1
+#define CFG_ENV_ADDR		(PHYS_FLASH_1 + 0x40000)	/* Addr of Environment Sector	*/
+#define CFG_ENV_SIZE		0x4000
+#define CFG_ENV_SECT_SIZE	0x40000				/* Size of the Environment Sector	*/
+#define CFG_MONITOR_LEN		0x20000				/* 128 KiB */
+
+/******************************************************************************
+ *
+ * CPU specific defines
+ *
+ ******************************************************************************/
+
+/*
+ * GPIO settings
+ *
+ * GPIO pin assignments
+ * GPIO	    Name	Dir Out AF
+ * 0	    NC
+ * 1	    NC
+ * 2	    SIRQ1	I
+ * 3	    SIRQ2	I
+ * 4	    SIRQ3	I
+ * 5	    DMAACK1	O   0
+ * 6	    DMAACK2	O   0
+ * 7	    DMAACK3	O   0
+ * 8	    TC1		O   0
+ * 9	    TC2		O   0
+ * 10	    TC3		O   0
+ * 11	    nDMAEN	O   1
+ * 12	    AENCTRL	O   0
+ * 13	    PLDTC	O   0
+ * 14	    ETHIRQ	I
+ * 15	    NC
+ * 16	    NC
+ * 17	    NC
+ * 18	    RDY		I
+ * 19	    DMASIO	I
+ * 20	    ETHIRQ	NC
+ * 21	    NC
+ * 22	    PGMEN	O   1	 FIXME for debug only enable flash
+ * 23	    NC
+ * 24	    NC
+ * 25	    NC
+ * 26	    NC
+ * 27	    NC
+ * 28	    NC
+ * 29	    NC
+ * 30	    NC
+ * 31	    NC
+ * 32	    NC
+ * 33	    NC
+ * 34	    FFRXD	I	01
+ * 35	    FFCTS	I	01
+ * 36	    FFDCD	I	01
+ * 37	    FFDSR	I	01
+ * 38	    FFRI	I	01
+ * 39	    FFTXD	O   1	10
+ * 40	    FFDTR	O   0	10
+ * 41	    FFRTS	O   0	10
+ * 42	    RS232FOFF	O   0	00
+ * 43	    NC
+ * 44	    NC
+ * 45	    IRSL0	O   0
+ * 46	    IRRX0	I	01
+ * 47	    IRTX0	O   0	10
+ * 48	    NC
+ * 49	    nIOWE	O   0
+ * 50	    NC
+ * 51	    NC
+ * 52	    NC
+ * 53	    NC
+ * 54	    NC
+ * 55	    NC
+ * 56	    NC
+ * 57	    NC
+ * 58	    DKDIRQ	I
+ * 59	    NC
+ * 60	    NC
+ * 61	    NC
+ * 62	    NC
+ * 63	    NC
+ * 64	    COMLED	O   0
+ * 65	    COMLED	O   0
+ * 66	    COMLED	O   0
+ * 67	    COMLED	O   0
+ * 68	    COMLED	O   0
+ * 69	    COMLED	O   0
+ * 70	    COMLED	O   0
+ * 71	    COMLED	O   0
+ * 72	    NC
+ * 73	    NC
+ * 74	    NC
+ * 75	    NC
+ * 76	    NC
+ * 77	    NC
+ * 78	    CSIO	O   1
+ * 79	    NC
+ * 80	    CSETH	O   1
+ *
+ * NOTE: All NC's are defined to be outputs
+ *
+ */
+/* Pin direction control */
+#define CFG_GPDR0_VAL	    0xd3808000
+#define CFG_GPDR1_VAL	    0xfcffab83
+#define CFG_GPDR2_VAL	    0x0001ffff
+/* Set and Clear registers */
+#define CFG_GPSR0_VAL	    0x00008000
+#define CFG_GPSR1_VAL	    0x00ff0002
+#define CFG_GPSR2_VAL	    0x0001c000
+#define CFG_GPCR0_VAL	    0x00000000
+#define CFG_GPCR1_VAL	    0x00000000
+#define CFG_GPCR2_VAL	    0x00000000
+/* Edge detect registers (these are set by the kernel) */
+#define CFG_GRER0_VAL	    0x00002180
+#define CFG_GRER1_VAL	    0x00000000
+#define CFG_GRER2_VAL	    0x00000000
+#define CFG_GFER0_VAL	    0x000043e0
+#define CFG_GFER1_VAL	    0x00000000
+#define CFG_GFER2_VAL	    0x00000000
+/* Alternate function registers */
+#define CFG_GAFR0_L_VAL	    0x80000004
+#define CFG_GAFR0_U_VAL	    0x595a8010
+#define CFG_GAFR1_L_VAL	    0x699a9559
+#define CFG_GAFR1_U_VAL	    0xaaa5aaaa
+#define CFG_GAFR2_L_VAL	    0xaaaaaaaa
+#define CFG_GAFR2_U_VAL	    0x00000002
+
+/*
+ * Clocks, power control and interrupts
+ */
+#define CFG_PSSR_VAL	    0x00000030
+#define CFG_CCCR_VAL	    0x00000161	/* 100 MHz memory, 400 MHz CPU, 400 Turbo  */
+#define CFG_CKEN_VAL	    0x000141ec	/* FFUART and STUART enabled	*/
+#define CFG_ICMR_VAL	    0x00000000	/* No interrupts enabled	*/
+
+/* FIXME
+ *
+ * RTC settings
+ * Watchdog
+ *
+ */
+
+/*
+ * Memory settings
+ *
+ */
+#define CFG_MSC0_VAL	    0x122423f0	/* FLASH   / LAN	    (cs0)/(cS1)	  */
+#define CFG_MSC1_VAL	    0x35f4aa4c	/* USB	   / ST3+ST5	    (cs2)/(cS3)	  */
+#define CFG_MSC2_VAL	    0x35f435fc	/* IDE	   / BCR + WatchDog (cs4)/(cS5)	  */
+#define CFG_MDCNFG_VAL	    0x000009c9
+#define CFG_MDMRS_VAL	    0x00220022
+#define CFG_MDREFR_VAL	    0x000da018	/* Initial setting, individual bits set in memsetup.S */
+
+/*
+ * PCMCIA and CF Interfaces (NOT USED, these values from lubbock init)
+ */
+#define CFG_MECR_VAL	      0x00000000
+#define CFG_MCMEM0_VAL	      0x00010504
+#define CFG_MCMEM1_VAL	      0x00010504
+#define CFG_MCATT0_VAL	      0x00010504
+#define CFG_MCATT1_VAL	      0x00010504
+#define CFG_MCIO0_VAL	      0x00004715
+#define CFG_MCIO1_VAL	      0x00004715
+
+/* Board specific defines */
+
+#ifndef __ASSEMBLY__
+
+/* global prototypes */
+void led_code(int code, int color);
+
+#endif
+
+#endif	/* __CONFIG_H */