Code cleanup.

4 files changed, 19 insertions, 21 deletions

diff --git a/include/configs/APC405.h b/include/configs/APC405.h
index 588f9f601..d46b8445a 100644
--- a/include/configs/APC405.h
+++ b/include/configs/APC405.h
@@ -130,8 +130,8 @@
 
 /* The following table includes the supported baudrates */
 #define CFG_BAUDRATE_TABLE      \
-        { 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
-         57600, 115200, 230400, 460800, 921600 }
+	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
+	 57600, 115200, 230400, 460800, 921600 }
 
 #define CFG_LOAD_ADDR	0x100000	/* default load address */
 #define CFG_EXTBDINFO	1		/* To use extended board_into (bd_t) */
@@ -163,7 +163,7 @@
 #define CONFIG_PCI			/* include pci support	        */
 #define CONFIG_PCI_HOST	PCI_HOST_FORCE  /* select pci host function     */
 #define CONFIG_PCI_PNP			/* do pci plug-and-play         */
-                                        /* resource configuration       */
+					/* resource configuration       */
 
 #define CONFIG_PCI_SCAN_SHOW            /* print pci devices @ startup  */
 
@@ -236,7 +236,7 @@
 #define CFG_ENV_IS_IN_EEPROM    1       /* use EEPROM for environment vars */
 #define CFG_ENV_OFFSET          0x000   /* environment starts at the beginning of the EEPROM */
 #define CFG_ENV_SIZE            0x800   /* 2048 bytes may be used for env vars*/
-                                   /* total size of a CAT24WC16 is 2048 bytes */
+				   /* total size of a CAT24WC16 is 2048 bytes */
 
 #define CFG_NVRAM_BASE_ADDR	0xF0000500		/* NVRAM base address	*/
 #define CFG_NVRAM_SIZE		242		        /* NVRAM size		*/
@@ -262,7 +262,7 @@
  * Cache Configuration
  */
 #define CFG_DCACHE_SIZE		16384	/* For IBM 405 CPUs, older 405 ppc's    */
-                                        /* have only 8kB, 16kB is save here     */
+					/* have only 8kB, 16kB is save here     */
 #define CFG_CACHELINE_SIZE	32	/* ...			*/
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
diff --git a/include/configs/CPCI750.h b/include/configs/CPCI750.h
index 45fcee00f..fab263b4b 100644
--- a/include/configs/CPCI750.h
+++ b/include/configs/CPCI750.h
@@ -145,11 +145,11 @@
 			 | CFG_CMD_PCI     \
 			 | CFG_CMD_ELF	   \
 			 | CFG_CMD_DATE	   \
-                         | CFG_CMD_NET     \
-                         | CFG_CMD_PING    \
-                         | CFG_CMD_IDE     \
-                         | CFG_CMD_FAT     \
-                         | CFG_CMD_EXT2    \
+			 | CFG_CMD_NET     \
+			 | CFG_CMD_PING    \
+			 | CFG_CMD_IDE     \
+			 | CFG_CMD_FAT     \
+			 | CFG_CMD_EXT2    \
 					)
 
 #define CONFIG_DOS_PARTITION
@@ -331,11 +331,11 @@
 #define CFG_DEV3_PAR		0x8FCFFFFF				/* nvram/can    */
 #define CFG_BOOT_PAR		0x8FDFFFFF				/* 16 bit flash */
 
-        /*   c    4    a      8     2     4    1      c		*/
-        /* 33 22|2222|22 22|111 1|11 11|1 1  |    |		*/
-        /* 10 98|7654|32 10|987 6|54 32|1 098|7 654|3 210	*/
-        /* 11|00|0100|10 10|100|0 00|10 0|100 0|001 1|100	*/
-        /*  3| 0|.... ..| 2| 4 |  0 |  4 |  8  |  3  | 4	*/
+	/*   c    4    a      8     2     4    1      c		*/
+	/* 33 22|2222|22 22|111 1|11 11|1 1  |    |		*/
+	/* 10 98|7654|32 10|987 6|54 32|1 098|7 654|3 210	*/
+	/* 11|00|0100|10 10|100|0 00|10 0|100 0|001 1|100	*/
+	/*  3| 0|.... ..| 2| 4 |  0 |  4 |  8  |  3  | 4	*/
 
 
 /* MPP Control MV64360 Appendix P P. 632*/
@@ -392,8 +392,6 @@
 #define CFG_PCI0_0_MEM_SPACE	(CFG_PCI0_MEM_BASE)
 #define CFG_PCI1_0_MEM_SPACE	(CFG_PCI1_MEM_BASE)
 
-
-
 /* PCI I/O MAP section */
 #define CFG_PCI0_IO_BASE	0xfa000000
 #define CFG_PCI0_IO_SIZE	_16M
diff --git a/include/configs/TASREG.h b/include/configs/TASREG.h
index 2d52a8b50..119bc2442 100644
--- a/include/configs/TASREG.h
+++ b/include/configs/TASREG.h
@@ -51,9 +51,9 @@
 #undef CONFIG_MONITOR_IS_IN_RAM	              /* no pre-loader required!!! ;-) */
 
 #define CONFIG_COMMANDS	      ((CONFIG_CMD_DFL        |    \
-                                CFG_CMD_BSP           |    \
-                                CFG_CMD_EEPROM        |    \
-                                CFG_CMD_I2C            ) & \
+				CFG_CMD_BSP           |    \
+				CFG_CMD_EEPROM        |    \
+				CFG_CMD_I2C            ) & \
 			       ~(CFG_CMD_NET))
 
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index f1955a513..595bd292b 100644
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -426,7 +426,7 @@
  * use PSC6:
  *   on STK52xx:
  *      use as UART. Pins PSC6_0 to PSC6_3 are used.
-        Bits 9:11 (mask: 0x00700000):
+	Bits 9:11 (mask: 0x00700000):
  *	   101 -> PSC6 : Extended POST test is not available
  *   on MINI-FAP and TQM5200_IB:
  *      use PSC6_1 and PSC6_3 as GPIO: Bits 9:11 (mask: 0x00700000):