Add support for Lite5200B board.

Patch by  Patch by Jose Maria (Txema) Lopez, 16 Jan 2006

2 files changed, 77 insertions, 30 deletions

diff --git a/include/configs/IceCube.h b/include/configs/IceCube.h
index afba5c625..596e52ce3 100644
--- a/include/configs/IceCube.h
+++ b/include/configs/IceCube.h
@@ -122,9 +122,13 @@
 #   define CFG_LOWBOOT16	1
 #endif
 #if (TEXT_BASE == 0xFF800000)		/* Boot low with  8 MB Flash */
+#if defined(CONFIG_LITE5200B)
+#   error CFG_LOWBOOT08 is incompatible with the Lite5200B
+#else
 #   define CFG_LOWBOOT	        1
 #   define CFG_LOWBOOT08	1
 #endif
+#endif
 
 /*
  * Autobooting
@@ -160,8 +164,12 @@
 /*
  * IPB Bus clocking configuration.
  */
-#undef CFG_IPBSPEED_133   		/* define for 133MHz speed */
+#if defined(CONFIG_LITE5200B)
+#define CFG_IPBSPEED_133 	/* define for 133MHz speed */
+#else
+#undef CFG_IPBSPEED_133   	/* define for 133MHz speed */
 #endif
+#endif /* CONFIG_MPC5200 */
 /*
  * I2C configuration
  */
@@ -182,6 +190,20 @@
 /*
  * Flash configuration
  */
+#if defined(CONFIG_LITE5200B)
+#define CFG_FLASH_BASE		0xFE000000
+#define CFG_FLASH_SIZE		0x01000000
+#if !defined(CFG_LOWBOOT)
+#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x01760000 + 0x00800000)
+#else	/* CFG_LOWBOOT */
+#if defined(CFG_LOWBOOT08)
+# error CFG_LOWBOOT08 is incompatible with the Lite5200B
+#endif
+#if defined(CFG_LOWBOOT16)
+#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x01060000)
+#endif
+#endif /* CFG_LOWBOOT */
+#else /* !CONFIG_LITE5200B (IceCube)*/
 #define CFG_FLASH_BASE		0xFF000000
 #define CFG_FLASH_SIZE		0x01000000
 #if !defined(CFG_LOWBOOT)
@@ -194,6 +216,7 @@
 #define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x00040000)
 #endif
 #endif	/* CFG_LOWBOOT */
+#endif /* CONFIG_LITE5200B */
 #define CFG_MAX_FLASH_BANKS	2	/* max num of memory banks      */
 
 #define CFG_MAX_FLASH_SECT	128	/* max num of sects on one chip */
@@ -203,13 +226,23 @@
 
 #undef CONFIG_FLASH_16BIT	/* Flash is 8-bit */
 
+#if defined(CONFIG_LITE5200B)
+#define CFG_FLASH_CFI_DRIVER
+#define CFG_FLASH_CFI
+#define CFG_FLASH_BANKS_LIST	{CFG_CS1_START,CFG_CS0_START}
+#endif
+
 
 /*
  * Environment settings
  */
 #define CFG_ENV_IS_IN_FLASH	1
 #define CFG_ENV_SIZE		0x10000
+#if defined(CONFIG_LITE5200B)
+#define CFG_ENV_SECT_SIZE	0x20000
+#else
 #define CFG_ENV_SECT_SIZE	0x10000
+#endif
 #define CONFIG_ENV_OVERWRITE	1
 
 /*
@@ -246,6 +279,9 @@
  */
 /* #define CONFIG_FEC_10MBIT 1 */
 #define CONFIG_PHY_ADDR		0x00
+#if defined(CONFIG_LITE5200B)
+#define CONFIG_FEC_MII100	1
+#endif
 
 /*
  * GPIO configuration
@@ -288,6 +324,16 @@
 #define CFG_HID0_FINAL		0
 #endif
 
+#if defined(CONFIG_LITE5200B)
+#define CFG_CS1_START		CFG_FLASH_BASE
+#define CFG_CS1_SIZE		CFG_FLASH_SIZE
+#define CFG_CS1_CFG		0x00047800
+#define CFG_CS0_START		(CFG_FLASH_BASE + CFG_FLASH_SIZE)
+#define CFG_CS0_SIZE		CFG_FLASH_SIZE
+#define CFG_BOOTCS_START	CFG_CS0_START
+#define CFG_BOOTCS_SIZE		CFG_FLASH_SIZE
+#define CFG_BOOTCS_CFG		0x00047800
+#else /* IceCube aka Lite5200 */
 #ifdef CONFIG_MPC5200_DDR
 
 #define CFG_BOOTCS_START	(CFG_CS1_START + CFG_CS1_SIZE)
@@ -306,6 +352,7 @@
 #define CFG_CS0_SIZE		CFG_FLASH_SIZE
 
 #endif /* CONFIG_MPC5200_DDR */
+#endif /*CONFIG_LITE5200B */
 
 #define CFG_CS_BURST		0x00000000
 #define CFG_CS_DEADCYCLE	0x33333333
diff --git a/include/configs/RPXlite_DW.h b/include/configs/RPXlite_DW.h
index 5d17712f1..31025473f 100644
--- a/include/configs/RPXlite_DW.h
+++ b/include/configs/RPXlite_DW.h
@@ -45,7 +45,7 @@
  */
 
 /* #define DEBUG	1 */
-/* #define DEPLOYMENT 	1 */
+/* #define DEPLOYMENT	1 */
 
 #undef	CONFIG_MPC860
 #define CONFIG_MPC823		1	/* This is a MPC823e CPU. */
@@ -61,23 +61,23 @@
 #define CONFIG_BAUDRATE		9600	/* console default baudrate = 9600bps	*/
 
 #ifdef DEBUG
-#define CONFIG_BOOTDELAY        -1      /* autoboot disabled            */
+#define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
 #else
-#define CONFIG_BOOTDELAY        6       /* autoboot after 6 seconds     */
+#define CONFIG_BOOTDELAY	6	/* autoboot after 6 seconds	*/
 
 #ifdef DEPLOYMENT
-#define CONFIG_BOOT_RETRY_TIME          -1
+#define CONFIG_BOOT_RETRY_TIME		-1
 #define CONFIG_AUTOBOOT_KEYED
-#define CONFIG_AUTOBOOT_PROMPT          "autoboot in %d seconds (stop with 'st')...\n"
-#define CONFIG_AUTOBOOT_STOP_STR        "st"
+#define CONFIG_AUTOBOOT_PROMPT		"autoboot in %d seconds (stop with 'st')...\n"
+#define CONFIG_AUTOBOOT_STOP_STR	"st"
 #define CONFIG_ZERO_BOOTDELAY_CHECK
-#define CONFIG_RESET_TO_RETRY           1
-#define CONFIG_BOOT_RETRY_MIN           1
+#define CONFIG_RESET_TO_RETRY		1
+#define CONFIG_BOOT_RETRY_MIN		1
 #endif	/* DEPLOYMENT */
 #endif	/* DEBUG */
 
 /* pre-boot commands */
-#define CONFIG_PREBOOT          "setenv stdout serial;setenv stdin serial"
+#define CONFIG_PREBOOT		"setenv stdout serial;setenv stdin serial"
 
 #undef	CONFIG_BOOTARGS
 #define CONFIG_EXTRA_ENV_SETTINGS					\
@@ -117,35 +117,35 @@
 
 #define CONFIG_BOOTP_MASK	(CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
 
-#if 1          /* Enable this staff could make image enlarge about 25KB. Mask it if you
-                  don't want the advanced function */
+#if 1	       /* Enable this stuff could make image enlarge about 25KB. Mask it if you
+		  don't want the advanced function */
 
-#ifdef  CONFIG_SPLASH_SCREEN
-#define CONFIG_COMMANDS       ( CONFIG_CMD_DFL  | \
+#ifdef	CONFIG_SPLASH_SCREEN
+#define CONFIG_COMMANDS	      ( CONFIG_CMD_DFL	| \
 				CFG_CMD_ASKENV	| \
-				CFG_CMD_BMP     | \
-				CFG_CMD_JFFS2   | \
-				CFG_CMD_PING    | \
-				CFG_CMD_ELF     | \
+				CFG_CMD_BMP	| \
+				CFG_CMD_JFFS2	| \
+				CFG_CMD_PING	| \
+				CFG_CMD_ELF	| \
 				CFG_CMD_REGINFO | \
-				CFG_CMD_DHCP    )
+				CFG_CMD_DHCP	)
 #else
-#define CONFIG_COMMANDS       ( CONFIG_CMD_DFL  | \
-		                CFG_CMD_ASKENV  | \
-				CFG_CMD_JFFS2   | \
-				CFG_CMD_PING    | \
-				CFG_CMD_ELF     | \
+#define CONFIG_COMMANDS	      ( CONFIG_CMD_DFL	| \
+				CFG_CMD_ASKENV	| \
+				CFG_CMD_JFFS2	| \
+				CFG_CMD_PING	| \
+				CFG_CMD_ELF	| \
 				CFG_CMD_REGINFO | \
-				CFG_CMD_DHCP    )
-#endif  /* CONFIG_SPLASH_SCREEN */
+				CFG_CMD_DHCP	)
+#endif	/* CONFIG_SPLASH_SCREEN */
 
 /* test-only */
-#define CFG_JFFS2_FIRST_BANK    0           /* use for JFFS2 */
-#define CFG_JFFS2_NUM_BANKS     1           /* ! second bank contains U-Boot */
+#define CFG_JFFS2_FIRST_BANK	0	    /* use for JFFS2 */
+#define CFG_JFFS2_NUM_BANKS	1	    /* ! second bank contains U-Boot */
 
 #define CONFIG_NETCONSOLE
 
-#endif  /* 1 */
+#endif	/* 1 */
 
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>
@@ -310,7 +310,7 @@
 #if defined(RPXlite_64MHz)
 #define CFG_SCCR	( SCCR_TBS | SCCR_EBDF01 )  /* %%%SCCR:0x02020000 */
 #else
-#define CFG_SCCR        ( SCCR_TBS | SCCR_EBDF00 )  /* %%%SCCR:0x02000000 */
+#define CFG_SCCR	( SCCR_TBS | SCCR_EBDF00 )  /* %%%SCCR:0x02000000 */
 #endif
 
 /*-----------------------------------------------------------------------