summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--cpu/mpc85xx/pci.c3
-rw-r--r--doc/README.mpc85xxads3
-rw-r--r--include/configs/MPC8540ADS.h6
3 files changed, 11 insertions, 1 deletions
diff --git a/cpu/mpc85xx/pci.c b/cpu/mpc85xx/pci.c
index ca11bce22..cfb7dcdc8 100644
--- a/cpu/mpc85xx/pci.c
+++ b/cpu/mpc85xx/pci.c
@@ -72,6 +72,9 @@ pci_mpc85xx_init(struct pci_controller *board_hose)
if (!(gur->pordevsr & PORDEVSR_PCI)) {
/* PCI-X init */
+ if (CONFIG_SYS_CLK_FREQ < 66000000)
+ printf("PCI-X will only work at 66 MHz\n");
+
reg16 = PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ
| PCI_X_CMD_ERO | PCI_X_CMD_DPERR_E;
pci_hose_write_config_word(hose, dev, PCIX_COMMAND, reg16);
diff --git a/doc/README.mpc85xxads b/doc/README.mpc85xxads
index f0cf782a8..ae8202bdd 100644
--- a/doc/README.mpc85xxads
+++ b/doc/README.mpc85xxads
@@ -100,6 +100,9 @@ Updated 13-July-2004 Jon Loeliger
SW7[1:4] = 0101 = 5 => 5 x 66 = 330 CCB Sysclk
SW7[5:6] = 01 => 5:2 x 330 = 825 Core clock
+ In order to use PCI-X (only in the first PCI slot. The one with
+ the RIO connector), you need to set SW1[4] (config) to 1 (off).
+ Also, configure the board to run PCI at 66 MHz.
2. MEMORY MAP TO WORK WITH LINUX KERNEL
diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h
index 81ee945d4..8e4d2c95a 100644
--- a/include/configs/MPC8540ADS.h
+++ b/include/configs/MPC8540ADS.h
@@ -68,10 +68,14 @@
* The board, however, can run at 66MHz. In any event, this value
* must match the settings of some switches. Details can be found
* in the README.mpc85xxads.
+ *
+ * XXX -- Can't we run at 66 MHz, anyway? PCI should drop to
+ * 33MHz to accommodate, based on a PCI pin.
+ * Note that PCI-X won't work at 33MHz.
*/
#ifndef CONFIG_SYS_CLK_FREQ
-#define CONFIG_SYS_CLK_FREQ 66000000
+#define CONFIG_SYS_CLK_FREQ 33000000
#endif