diff options
Diffstat (limited to 'board/MAI/bios_emulator/scitech/makedefs/wc32.mk')
| -rw-r--r-- | board/MAI/bios_emulator/scitech/makedefs/wc32.mk | 353 |
1 files changed, 0 insertions, 353 deletions
diff --git a/board/MAI/bios_emulator/scitech/makedefs/wc32.mk b/board/MAI/bios_emulator/scitech/makedefs/wc32.mk deleted file mode 100644 index e5175ca9e..000000000 --- a/board/MAI/bios_emulator/scitech/makedefs/wc32.mk +++ /dev/null @@ -1,353 +0,0 @@ -############################################################################# -# -# SciTech Multi-platform Graphics Library -# -# ======================================================================== -# -# The contents of this file are subject to the SciTech MGL Public -# License Version 1.0 (the "License"); you may not use this file -# except in compliance with the License. You may obtain a copy of -# the License at http://www.scitechsoft.com/mgl-license.txt -# -# Software distributed under the License is distributed on an -# "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -# implied. See the License for the specific language governing -# rights and limitations under the License. -# -# The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc. -# -# The Initial Developer of the Original Code is SciTech Software, Inc. -# All Rights Reserved. -# -# ======================================================================== -# -# Descripton: Generic DMAKE startup makefile definitions file. Assumes -# that the SCITECH environment variable has been set to point -# to where all our stuff is installed. You should not need -# to change anything in this file. -# -# Watcom C++ 10.x 32 bit version. Supports Rational's DOS4GW -# DOS Extender, PMODE/W, Causeway, FlashTek's X32-VM, -# Phar Lap's TNT DOS Extender, 32-bit Windows development and -# 32-bit OS/2 development. -# -############################################################################# - -# Include standard startup script definitions -.IMPORT: SCITECH -.INCLUDE: "$(SCITECH)\makedefs\startup.mk" - -# Import enivornment variables that we use -.IMPORT .IGNORE : USE_TNT USE_X32 USE_X32VM USE_PMODEW STKCALL USE_CAUSEWAY -.IMPORT .IGNORE : USE_WIN386 USE_OS232 USE_OS2GUI WC_LIBBASE NOOPT DOSSTYLE -.IMPORT .IGNORE : OS2_SHELL USE_CODEVIEW USE_DOS32A USE_QNX4 LEAVE_LINKFILE - -# We are compiling for a 32 bit envionment - _32BIT_ := 1 - -# Setup special environment for QNX 4 (Unix'ish) -.IF $(USE_QNX4) - USE_QNX := 1 - L := .a # Libraries - LP := lib # LP - Library file prefix (name of file on disk) - LL := lib # Library link prefix (name of library on link command line) - LE := .a # Library link suffix (extension of library on link command line) -.ENDIF - -# Default commands for compiling, assembling linking and archiving - CC := wcc386 - CPP := wpp386 - CFLAGS := -zq-j-s-fpi87 -.IF $(USE_NASM) - AS := nasm - ASFLAGS := -t -f obj -d__FLAT__ -dSTDCALL_MANGLE -iINCLUDE -i$(SCITECH)\INCLUDE -.ELSE -.IF $(USE_TASM32) - AS := tasm32 - DLL_TASM := tasm32 -.ELIF $(USE_TASMX) - AS := tasmx - DLL_TASM := tasmx -.ELSE - AS := tasm - DLL_TASM := tasm -.ENDIF - ASFLAGS := /t /mx /m /w-res /w-mcp /D__FLAT__ /DSTDCALL_MANGLE /iINCLUDE /i$(SCITECH)\INCLUDE - GAS := gcc - GAS_FLAGS := -D__WATCOMC__ -D__SW_3S -D__SW_S -U__GNUC__ -UDJGPP -U__unix__ -Wall -I. -I$(SCITECH)\include -x assembler-with-cpp -.ENDIF - LD := wlink - LDFLAGS = -.IF $(USE_OS232) - RC := rc -.ELSE - RC := wrc -.ENDIF -.IF $(USE_WIN32) - RCFLAGS := -q /bt=nt -.ELIF $(USE_OS232) -.IF $(USE_OS2GUI) - CFLAGS += -D__OS2_PM__ -.ENDIF -.ELSE - RCFLAGS := -q -.ENDIF - LIB := wlib - LIBFLAGS := -q - ILIB := wlib - ILIBFLAGS := -c - INTEL_X86 := 1 - -# Set the compiler warning level -.IF $(MAX_WARN) - CFLAGS += -w4 -.ELSE - CFLAGS += -w1 -.ENDIF - -# Optionally turn on debugging information (Codeview format) -.IF $(DBG) -.IF $(USE_WIN32) -.IF $(USE_CODEVIEW) - CFLAGS += -d2 -hc - LDFLAGS += D CODEVIEW OPT CVPACK -.ELSE - CFLAGS += -d2 - LDFLAGS += D A -.ENDIF -.ELSE - CFLAGS += -d2 - LDFLAGS += D A -.ENDIF - LIBFLAGS += -p=768 -.IF $(USE_NASM) - ASFLAGS += -F borland -g -.ELSE -.IF $(USE_TASM32) - ASFLAGS += /q # TASM32 fucks up Watcom C++ debug info -.ELIF $(OS2_SHELL) - ASFLAGS += /q # TASM for OS/2 fucks up Watcom C++ debug info -.ELSE - ASFLAGS += /zi -.ENDIF -.ENDIF -.ELSE -.IF $(USE_NASM) - ASFLAGS += -F null -.ELSE - ASFLAGS += /q -.ENDIF -.END - -# Optionally turn on optimisations (with or without stack conventions) -.IF $(STKCALL) -.IF $(OPT) - CFLAGS += -onatx-5s-fp5 -.ELIF $(OPT_SIZE) - CFLAGS += -onaslmr-5s-fp5 -.ELIF $(NOOPT) - CFLAGS += -od-5s -.ELSE - CFLAGS += -3s -.END -.ELSE -.IF $(OPT) - CFLAGS += -onatx-5r-fp5 -.ELIF $(OPT_SIZE) - CFLAGS += -onaslmr-5r-fp5 -.ELIF $(NOOPT) - CFLAGS += -od-5r -.END -.END - -# Optionally turn on direct i387 FPU instructions optimised for Pentium -.IF $(FPU) - CFLAGS += -DFPU387 - ASFLAGS += -dFPU387 -.END - -# Optionally compile a beta release version of a product -.IF $(BETA) - CFLAGS += -DBETA - ASFLAGS += -dBETA -.END - -.IF $(USE_TNT) # Use Phar Lap's TNT DOS Extender - CFLAGS += -bt=nt -DTNT - ASFLAGS += -dTNT - LDFLAGS += SYS NT OP STUB=GOTNT.EXE - LIB_OS = DOS32 -.ELIF $(USE_X32VM) # Use FlashTek X-32VM DOS extender - CFLAGS += -bt=dos - LDFLAGS += SYS X32RV - DX_CFLAGS += -DX32VM - DX_ASFLAGS += -dX32VM - LIB_OS = DOS32 -.ELIF $(USE_X32) # Use FlashTek X-32 DOS extender - CFLAGS += -bt=dos - LDFLAGS += SYS X32R - DX_CFLAGS += -DX32VM - DX_ASFLAGS += -dX32VM - LIB_OS = DOS32 -.ELIF $(USE_QNX4) # Build QNX 4 app - CFLAGS += -bt=qnx386 - LDFLAGS += SYS QNX386FLAT OP CASEEXACT OP OFFSET=40k OP STACK=32k - CFLAGS += -D__QNX__ -D__UNIX__ - ASFLAGS += -d__QNX__ -d__UNIX__ - LIB_OS = QNX4 -.ELIF $(USE_OS232) -.IF $(BUILD_DLL) - CFLAGS += -bm-bd-bt=os2-sg-DBUILD_DLL - ASFLAGS += -dBUILD_DLL -.ELSE - CFLAGS += -bm-bt=os2-sg -.ENDIF - DX_ASFLAGS += -d__OS2__ - LIB_OS = os232 -.ELIF $(USE_SNAP) # Build 32 bit Snap app -.IF $(BUILD_DLL) - CFLAGS += -bm-bd-bt=nt-DBUILD_DLL - ASFLAGS += -dBUILD_DLL -.ELSE - CFLAGS += -bm-bt=nt-D_WIN32 -.ENDIF - LDFLAGS += OP nodefaultlibs -.IF $(STKCALL) - DEFLIBS := clib3s.lib,math3s.lib,noemu387.lib, -.ELSE - DEFLIBS := clib3r.lib,math3r.lib,noemu387.lib, -.ENDIF - LIB_OS = SNAP -.ELIF $(USE_WIN32) # Build 32 bit Windows NT app -.IF $(WIN32_GUI) -.ELSE - CFLAGS += -D__CONSOLE__ -.ENDIF -.IF $(BUILD_DLL) - CFLAGS += -bm-bd-bt=nt-sg-DBUILD_DLL -D_WIN32 - ASFLAGS += -dBUILD_DLL -.ELSE - CFLAGS += -bm-bt=nt-sg-D_WIN32 -.ENDIF - DX_ASFLAGS += -d__WINDOWS32__ - LIB_OS = WIN32 - DEFLIBS := kernel32.lib,user32.lib,gdi32.lib,advapi32.lib,shell32.lib,winmm.lib,comdlg32.lib,comctl32.lib,ole32.lib,oleaut32.lib,version.lib,winspool.lib,uuid.lib,wsock32.lib,rpcrt4.lib, -.ELIF $(USE_WIN386) # Build 32 bit Win386 extended app -.IF $(BUILD_DLL) - CFLAGS += -bd-bt=windows-DBUILD_DLL - ASFLAGS += -dBUILD_DLL -.ELSE - CFLAGS += -bt=windows -.ENDIF - DX_ASFLAGS += -d__WIN386__ - LIB_OS = WIN386 -.ELIF $(USE_PMODEW) # PMODE/W - CFLAGS += -bt=dos - USE_DOS4GW := 1 - USE_REALDOS := 1 - LDFLAGS += SYS PMODEW - DX_CFLAGS += -DDOS4GW - DX_ASFLAGS += -dDOS4GW - LIB_OS = DOS32 -.ELIF $(USE_CAUSEWAY) # Causeway - CFLAGS += -bt=dos - USE_DOS4GW := 1 - USE_REALDOS := 1 - LDFLAGS += SYS CAUSEWAY - DX_CFLAGS += -DDOS4GW - DX_ASFLAGS += -dDOS4GW - LIB_OS = DOS32 -.ELIF $(USE_DOS32A) # DOS32/A - CFLAGS += -bt=dos - USE_DOS4GW := 1 - USE_REALDOS := 1 - LDFLAGS += SYS DOS32A - DX_CFLAGS += -DDOS4GW - DX_ASFLAGS += -dDOS4GW - LIB_OS = DOS32 -.ELSE # Use DOS4GW - CFLAGS += -bt=dos - USE_DOS4GW := 1 - USE_REALDOS := 1 - LDFLAGS += SYS DOS4G - DX_CFLAGS += -DDOS4GW - DX_ASFLAGS += -dDOS4GW - LIB_OS = DOS32 -.END - -# Disable linking to default C runtime library and PM library - -.IF $(NO_RUNTIME) -LDFLAGS += OP nodefaultlibs -DEFLIBS := -.ELSE - -# Place to look for PM library files - -.IF $(USE_SNAP) # Build 32 bit Snap app or dll -PMLIB := -.ELIF $(USE_WIN32) -.IF $(STKCALL) -PMLIB := spm.lib, -.ELSE -PMLIB := pm.lib, -.ENDIF -.ELIF $(USE_OS232) -.IF $(STKCALL) -.IF $(USE_OS2GUI) -PMLIB := spm_pm.lib, -.ELSE -PMLIB := spm.lib, -.ENDIF -.ELSE -.IF $(USE_OS2GUI) -PMLIB := pm_pm.lib, -.ELSE -PMLIB := pm.lib, -.ENDIF -.ENDIF -.ELIF $(USE_QNX4) -.IF $(STKCALL) -PMLIB := libspm.a, -.ELSE -PMLIB := libpm.a, -.ENDIF -.ELIF $(USE_TNT) -.IF $(STKCALL) -PMLIB := tnt\spm.lib, -.ELSE -PMLIB := tnt\pm.lib, -.ENDIF -.ELIF $(USE_X32) -.IF $(STKCALL) -PMLIB := x32\spm.lib, -.ELSE -PMLIB := x32\pm.lib, -.ENDIF -.ELSE -.IF $(STKCALL) -PMLIB := dos4gw\spm.lib, -.ELSE -PMLIB := dos4gw\pm.lib, -.ENDIF -.ENDIF -.ENDIF - -# Define the base directory for library files - -.IF $(CHECKED) -LIB_BASE_DIR := $(SCITECH_LIB)\lib\debug -CFLAGS += -DCHECKED=1 -.ELSE -LIB_BASE_DIR := $(SCITECH_LIB)\lib\release -.ENDIF - -# Define where to install library files - LIB_BASE := $(LIB_BASE_DIR)\$(LIB_OS)\$(WC_LIBBASE) - LIB_DEST := $(LIB_BASE) - - LDFLAGS += op map - -# Define which file contains our rules - - RULES_MAK := wc32.mk |