diff options
Diffstat (limited to 'board/actux2/actux2.c')
| -rw-r--r-- | board/actux2/actux2.c | 134 |
1 files changed, 134 insertions, 0 deletions
diff --git a/board/actux2/actux2.c b/board/actux2/actux2.c new file mode 100644 index 000000000..f3a81a84b --- /dev/null +++ b/board/actux2/actux2.c @@ -0,0 +1,134 @@ +/* + * (C) Copyright 2007 + * Michael Schwingen, michael@schwingen.org + * + * (C) Copyright 2006 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * (C) Copyright 2002 + * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger <mgroeger@sysgo.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> +#include <malloc.h> +#include <asm/arch/ixp425.h> +#include <asm/io.h> + +#include <miiphy.h> + +#include "actux2_hw.h" + +DECLARE_GLOBAL_DATA_PTR; + +int board_init (void) +{ + gd->bd->bi_arch_number = MACH_TYPE_ACTUX2; + + /* adress of boot parameters */ + gd->bd->bi_boot_params = 0x00000100; + + GPIO_OUTPUT_ENABLE (CFG_GPIO_IORST); + GPIO_OUTPUT_ENABLE (CFG_GPIO_ETHRST); + GPIO_OUTPUT_ENABLE (CFG_GPIO_DSR); + GPIO_OUTPUT_ENABLE (CFG_GPIO_DCD); + + GPIO_OUTPUT_CLEAR (CFG_GPIO_IORST); + GPIO_OUTPUT_CLEAR (CFG_GPIO_ETHRST); + + GPIO_OUTPUT_CLEAR (CFG_GPIO_DSR); + GPIO_OUTPUT_SET (CFG_GPIO_DCD); + + /* Setup GPIO's for Interrupt inputs */ + GPIO_OUTPUT_DISABLE (CFG_GPIO_DBGINT); + GPIO_OUTPUT_DISABLE (CFG_GPIO_ETHINT); + + /* Setup GPIO's for 33MHz clock output */ + GPIO_OUTPUT_ENABLE (CFG_GPIO_PCI_CLK); + GPIO_OUTPUT_ENABLE (CFG_GPIO_EXTBUS_CLK); + *IXP425_GPIO_GPCLKR = 0x011001FF; + + /* CS1: IPAC-X */ + *IXP425_EXP_CS1 = 0x94d10013; + /* CS5: Debug port */ + *IXP425_EXP_CS5 = 0x9d520003; + /* CS6: HW release register */ + *IXP425_EXP_CS6 = 0x81860001; + /* CS7: LEDs */ + *IXP425_EXP_CS7 = 0x80900003; + + udelay (533); + GPIO_OUTPUT_SET (CFG_GPIO_IORST); + GPIO_OUTPUT_SET (CFG_GPIO_ETHRST); + + ACTUX2_LED1 (1); + ACTUX2_LED2 (0); + ACTUX2_LED3 (0); + ACTUX2_LED4 (0); + + return 0; +} + +/* + * Check Board Identity + */ +int checkboard (void) +{ + char revision; + char *s = getenv ("serial#"); + + puts ("Board: AcTux-2 rev."); + putc (ACTUX2_BOARDREL + 'A' - 1); + putc ('\n'); + + return (0); +} + +int dram_init (void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; + + return (0); +} + +/************************************************************************* + * get_board_rev() - setup to pass kernel board revision information + * 0 = reserved + * 1 = Rev. A + * 2 = Rev. B + *************************************************************************/ +u32 get_board_rev (void) +{ + return ACTUX2_BOARDREL; +} + +void reset_phy (void) +{ + int i; + + /* init IcPlus IP175C ethernet switch to native IP175C mode */ + miiphy_write ("NPE0", 29, 31, 0x175C); +} |