diff options
Diffstat (limited to 'board/amcc/luan/luan.c')
| -rw-r--r-- | board/amcc/luan/luan.c | 458 |
1 files changed, 458 insertions, 0 deletions
diff --git a/board/amcc/luan/luan.c b/board/amcc/luan/luan.c new file mode 100644 index 000000000..c6b79a9f5 --- /dev/null +++ b/board/amcc/luan/luan.c @@ -0,0 +1,458 @@ +/* + * (C) Copyright 2005 + * John Otken, jotken@softadvances.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> +#include <ppc4xx.h> +#include <asm/processor.h> +#include <spd_sdram.h> +#include "epld.h" + + +extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ + + +/************************************************************************* + * int board_early_init_f() + * + ************************************************************************/ +int board_early_init_f(void) +{ + volatile epld_t *x = (epld_t *) CFG_EPLD_BASE; + + mtebc( pb0ap, 0x03800000 ); /* set chip selects */ + mtebc( pb0cr, 0xffc58000 ); /* ebc0_b0cr, 4MB at 0xffc00000 CS0 */ + mtebc( pb1ap, 0x03800000 ); + mtebc( pb1cr, 0xff018000 ); /* ebc0_b1cr, 1MB at 0xff000000 CS1 */ + mtebc( pb2ap, 0x03800000 ); + mtebc( pb2cr, 0xff838000 ); /* ebc0_b2cr, 2MB at 0xff800000 CS2 */ + + mtdcr( uic1sr, 0xffffffff ); /* Clear all interrupts */ + mtdcr( uic1er, 0x00000000 ); /* disable all interrupts */ + mtdcr( uic1cr, 0x00000000 ); /* Set Critical / Non Critical interrupts */ + mtdcr( uic1pr, 0x7fff83ff ); /* Set Interrupt Polarities */ + mtdcr( uic1tr, 0x001f8000 ); /* Set Interrupt Trigger Levels */ + mtdcr( uic1vr, 0x00000001 ); /* Set Vect base=0,INT31 Highest priority */ + mtdcr( uic1sr, 0x00000000 ); /* clear all interrupts */ + mtdcr( uic1sr, 0xffffffff ); + + mtdcr( uic0sr, 0xffffffff ); /* Clear all interrupts */ + mtdcr( uic0er, 0x00000000 ); /* disable all interrupts excepted cascade */ + mtdcr( uic0cr, 0x00000001 ); /* Set Critical / Non Critical interrupts */ + mtdcr( uic0pr, 0xffffffff ); /* Set Interrupt Polarities */ + mtdcr( uic0tr, 0x01000004 ); /* Set Interrupt Trigger Levels */ + mtdcr( uic0vr, 0x00000001 ); /* Set Vect base=0,INT31 Highest priority */ + mtdcr( uic0sr, 0x00000000 ); /* clear all interrupts */ + mtdcr( uic0sr, 0xffffffff ); + + x->ethuart &= ~EPLD2_RESET_ETH_N; /* put Ethernet+PHY in reset */ + + return 0; +} + + +/************************************************************************* + * int misc_init_r() + * + ************************************************************************/ +int misc_init_r(void) +{ + volatile epld_t *x = (epld_t *) CFG_EPLD_BASE; + x->ethuart |= EPLD2_RESET_ETH_N; /* take Ethernet+PHY out of reset */ + + return 0; +} + + +/************************************************************************* + * int checkboard() + * + ************************************************************************/ +int checkboard(void) +{ + char *s = getenv("serial#"); + + printf("Board: Luan - AMCC PPC440SP Evaluation Board"); + + if (s != NULL) { + puts(", serial# "); + puts(s); + } + putc('\n'); + + return 0; +} + + +/************************************************************************* + * long int fixed_sdram() + * + ************************************************************************/ +static long int fixed_sdram(void) +{ /* DDR2 init from BDI2000 script */ + mtdcr( 0x10, 0x00000021 ); /* MCIF0_MCOPT2 - zero DCEN bit */ + mtdcr( 0x11, 0x84000000 ); + mtdcr( 0x10, 0x00000020 ); /* MCIF0_MCOPT1 - no ECC, 64 bits, 4 banks, DDR2 */ + mtdcr( 0x11, 0x2D122000 ); + mtdcr( 0x10, 0x00000026 ); /* MCIF0_CODT - die termination on */ + mtdcr( 0x11, 0x00800026 ); + mtdcr( 0x10, 0x00000081 ); /* MCIF0_WRDTR - Write DQS Adv 90 + Fractional DQS Delay */ + mtdcr( 0x11, 0x82000800 ); + mtdcr( 0x10, 0x00000080 ); /* MCIF0_CLKTR - advance addr clock by 180 deg */ + mtdcr( 0x11, 0x80000000 ); + mtdcr( 0x10, 0x00000040 ); /* MCIF0_MB0CF - turn on CS0, N x 10 coll */ + mtdcr( 0x11, 0x00000201 ); + mtdcr( 0x10, 0x00000044 ); /* MCIF0_MB1CF - turn on CS0, N x 10 coll */ + mtdcr( 0x11, 0x00000201 ); + mtdcr( 0x10, 0x00000030 ); /* MCIF0_RTR - refresh every 7.8125uS */ + mtdcr( 0x11, 0x08200000 ); + mtdcr( 0x10, 0x00000085 ); /* MCIF0_SDTR1 - timing register 1 */ + mtdcr( 0x11, 0x80201000 ); + mtdcr( 0x10, 0x00000086 ); /* MCIF0_SDTR2 - timing register 2 */ + mtdcr( 0x11, 0x42103242 ); + mtdcr( 0x10, 0x00000087 ); /* MCIF0_SDTR3 - timing register 3 */ + mtdcr( 0x11, 0x0C100D14 ); + mtdcr( 0x10, 0x00000088 ); /* MCIF0_MMODE - CAS is 4 cycles */ + mtdcr( 0x11, 0x00000642 ); + mtdcr( 0x10, 0x00000089 ); /* MCIF0_MEMODE - diff DQS disabled */ + mtdcr( 0x11, 0x00000400 ); /* ODT term disabled */ + + mtdcr( 0x10, 0x00000050 ); /* MCIF0_INITPLR0 - NOP */ + mtdcr( 0x11, 0x81b80000 ); + mtdcr( 0x10, 0x00000051 ); /* MCIF0_INITPLR1 - PRE */ + mtdcr( 0x11, 0x82100400 ); + mtdcr( 0x10, 0x00000052 ); /* MCIF0_INITPLR2 - EMR2 */ + mtdcr( 0x11, 0x80820000 ); + mtdcr( 0x10, 0x00000053 ); /* MCIF0_INITPLR3 - EMR3 */ + mtdcr( 0x11, 0x80830000 ); + mtdcr( 0x10, 0x00000054 ); /* MCIF0_INITPLR4 - EMR DLL ENABLE */ + mtdcr( 0x11, 0x80810000 ); + mtdcr( 0x10, 0x00000055 ); /* MCIF0_INITPLR5 - MR DLL RESET */ + mtdcr( 0x11, 0x80800542 ); + mtdcr( 0x10, 0x00000056 ); /* MCIF0_INITPLR6 - PRE */ + mtdcr( 0x11, 0x82100400 ); + mtdcr( 0x10, 0x00000057 ); /* MCIF0_INITPLR7 - refresh */ + mtdcr( 0x11, 0x99080000 ); + mtdcr( 0x10, 0x00000058 ); /* MCIF0_INITPLR8 */ + mtdcr( 0x11, 0x99080000 ); + mtdcr( 0x10, 0x00000059 ); /* MCIF0_INITPLR9 */ + mtdcr( 0x11, 0x99080000 ); + mtdcr( 0x10, 0x0000005A ); /* MCIF0_INITPLR10 */ + mtdcr( 0x11, 0x99080000 ); + mtdcr( 0x10, 0x0000005B ); /* MCIF0_INITPLR11 - MR */ + mtdcr( 0x11, 0x80800442 ); + mtdcr( 0x10, 0x0000005C ); /* MCIF0_INITPLR12 - EMR OCD Default */ + mtdcr( 0x11, 0x80810380 ); + mtdcr( 0x10, 0x0000005D ); /* MCIF0_INITPLR13 - EMR OCD exit */ + mtdcr( 0x11, 0x80810000 ); + udelay( 10*1000 ); + + mtdcr( 0x10, 0x00000021 ); /* MCIF0_MCOPT2 - execute preloaded init */ + mtdcr( 0x11, 0x28000000 ); /* set DC_EN */ + udelay( 100*1000 ); + + mtdcr( 0x40, 0x0000F800 ); /* MQ0_B0BAS: base addr 00000000 / 256MB */ + mtdcr( 0x41, 0x1000F800 ); /* MQ0_B1BAS: base addr 10000000 / 256MB */ + + mtdcr( 0x10, 0x00000078 ); /* MCIF0_RDCC - auto set read stage */ + mtdcr( 0x11, 0x00000000 ); + mtdcr( 0x10, 0x00000070 ); /* MCIF0_RQDC - read DQS delay control */ + mtdcr( 0x11, 0x8000003A ); /* enabled, frac DQS delay */ + mtdcr( 0x10, 0x00000074 ); /* MCIF0_RFDC - two clock feedback delay */ + mtdcr( 0x11, 0x00000200 ); + + return 512 << 20; +} + + +/************************************************************************* + * long int initdram + * + ************************************************************************/ +long int initdram( int board_type ) +{ + long dram_size = 0; + +#if defined(CONFIG_SPD_EEPROM) + dram_size = spd_sdram (0); +#else + dram_size = fixed_sdram (); +#endif + + return dram_size; +} + + +/************************************************************************* + * int testdram() + * + ************************************************************************/ +#if defined(CFG_DRAM_TEST) +int testdram(void) +{ + unsigned long *mem = (unsigned long *) 0; + const unsigned long kend = (1024 / sizeof(unsigned long)); + unsigned long k, n; + + mtmsr(0); + + for (k = 0; k < CFG_KBYTES_SDRAM; + ++k, mem += (1024 / sizeof(unsigned long))) { + if ((k & 1023) == 0) { + printf("%3d MB\r", k / 1024); + } + + memset(mem, 0xaaaaaaaa, 1024); + for (n = 0; n < kend; ++n) { + if (mem[n] != 0xaaaaaaaa) { + printf("SDRAM test fails at: %08x\n", + (uint) & mem[n]); + return 1; + } + } + + memset(mem, 0x55555555, 1024); + for (n = 0; n < kend; ++n) { + if (mem[n] != 0x55555555) { + printf("SDRAM test fails at: %08x\n", + (uint) & mem[n]); + return 1; + } + } + } + printf("SDRAM test passes\n"); + + return 0; +} +#endif + + +/************************************************************************* + * pci_pre_init + * + * This routine is called just prior to registering the hose and gives + * the board the opportunity to check things. Returning a value of zero + * indicates that things are bad & PCI initialization should be aborted. + * + * Different boards may wish to customize the pci controller structure + * (add regions, override default access routines, etc) or perform + * certain pre-initialization actions. + * + ************************************************************************/ +#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) +int pci_pre_init( struct pci_controller *hose ) +{ + unsigned long strap; + + /*--------------------------------------------------------------------------+ + * The luan board is always configured as the host & requires the + * PCI arbiter to be enabled. + *--------------------------------------------------------------------------*/ + mfsdr(sdr_sdstp1, strap); + if( (strap & SDR0_SDSTP1_PAE_MASK) == 0 ) { + printf("PCI: SDR0_STRP1[%08lX] - PCI Arbiter disabled.\n",strap); + + return 0; + } + + return 1; +} +#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */ + + +/************************************************************************* + * pci_target_init + * + * The bootstrap configuration provides default settings for the pci + * inbound map (PIM). But the bootstrap config choices are limited and + * may not be sufficient for a given board. + * + ************************************************************************/ +#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) +void pci_target_init(struct pci_controller *hose) +{ + DECLARE_GLOBAL_DATA_PTR; + + /*--------------------------------------------------------------------------+ + * Disable everything + *--------------------------------------------------------------------------*/ + out32r( PCIX0_PIM0SA, 0 ); /* disable */ + out32r( PCIX0_PIM1SA, 0 ); /* disable */ + out32r( PCIX0_PIM2SA, 0 ); /* disable */ + out32r( PCIX0_EROMBA, 0 ); /* disable expansion rom */ + + /*--------------------------------------------------------------------------+ + * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping + * options to not support sizes such as 128/256 MB. + *--------------------------------------------------------------------------*/ + out32r( PCIX0_PIM0LAL, CFG_SDRAM_BASE ); + out32r( PCIX0_PIM0LAH, 0 ); + out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 ); + + out32r( PCIX0_BAR0, 0 ); + + /*--------------------------------------------------------------------------+ + * Program the board's subsystem id/vendor id + *--------------------------------------------------------------------------*/ + out16r( PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID ); + out16r( PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID ); + + out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY ); +} +#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */ + + +/************************************************************************* + * is_pci_host + * + * This routine is called to determine if a pci scan should be + * performed. With various hardware environments (especially cPCI and + * PPMC) it's insufficient to depend on the state of the arbiter enable + * bit in the strap register, or generic host/adapter assumptions. + * + * Rather than hard-code a bad assumption in the general 440 code, the + * 440 pci code requires the board to decide at runtime. + * + * Return 0 for adapter mode, non-zero for host (monarch) mode. + * + * + ************************************************************************/ +#if defined(CONFIG_PCI) +int is_pci_host(struct pci_controller *hose) +{ + return 1; +} +#endif /* defined(CONFIG_PCI) */ + + +/************************************************************************* + * hw_watchdog_reset + * + * This routine is called to reset (keep alive) the watchdog timer + * + ************************************************************************/ +#if defined(CONFIG_HW_WATCHDOG) +void hw_watchdog_reset(void) +{ +} +#endif + + +/************************************************************************* + * int on_off() + * + ************************************************************************/ +static int on_off( const char *s ) +{ + if (strcmp(s, "on") == 0) { + return 1; + } else if (strcmp(s, "off") == 0) { + return 0; + } + return -1; +} + + +/************************************************************************* + * void l2cache_disable() + * + ************************************************************************/ +static void l2cache_disable(void) +{ + mtdcr( l2_cache_cfg, 0 ); +} + + +/************************************************************************* + * void l2cache_enable() + * + ************************************************************************/ +static void l2cache_enable(void) /* see p258 7.4.1 Enabling L2 Cache */ +{ + mtdcr( l2_cache_cfg, 0x80000000 ); /* enable L2_MODE L2_CFG[L2M] */ + + mtdcr( l2_cache_addr, 0 ); /* set L2_ADDR with all zeros */ + + mtdcr( l2_cache_cmd, 0x80000000 ); /* issue HCLEAR command via L2_CMD */ + + while (!(mfdcr( l2_cache_stat ) & 0x80000000 )) ;; /* poll L2_SR for completion */ + + mtdcr( l2_cache_cmd, 0x10000000 ); /* clear cache errors L2_CMD[CCP] */ + + mtdcr( l2_cache_cmd, 0x08000000 ); /* clear tag errors L2_CMD[CTE] */ + + mtdcr( l2_cache_snp0, 0 ); /* snoop registers */ + mtdcr( l2_cache_snp1, 0 ); + + __asm__ volatile ("sync"); /* msync */ + + mtdcr( l2_cache_cfg, 0xe0000000 ); /* inst and data use L2 */ + + __asm__ volatile ("sync"); +} + + +/************************************************************************* + * int l2cache_status() + * + ************************************************************************/ +static int l2cache_status(void) +{ + return (mfdcr( l2_cache_cfg ) & 0x60000000) != 0; +} + + +/************************************************************************* + * int do_l2cache() + * + ************************************************************************/ +int do_l2cache( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[] ) +{ + switch (argc) { + case 2: /* on / off */ + switch (on_off(argv[1])) { + case 0: l2cache_disable(); + break; + case 1: l2cache_enable(); + break; + } + /* FALL TROUGH */ + case 1: /* get status */ + printf ("L2 Cache is %s\n", + l2cache_status() ? "ON" : "OFF"); + return 0; + default: + printf ("Usage:\n%s\n", cmdtp->usage); + return 1; + } + + return 0; +} + + +U_BOOT_CMD( + l2cache, 2, 1, do_l2cache, + "l2cache - enable or disable L2 cache\n", + "[on, off]\n" + " - enable or disable L2 cache\n" + ); |