summaryrefslogtreecommitdiff
path: root/cpu/mcf52x2/fec.c
diff options
context:
space:
mode:
Diffstat (limited to 'cpu/mcf52x2/fec.c')
-rw-r--r--cpu/mcf52x2/fec.c605
1 files changed, 0 insertions, 605 deletions
diff --git a/cpu/mcf52x2/fec.c b/cpu/mcf52x2/fec.c
deleted file mode 100644
index b6540b55a..000000000
--- a/cpu/mcf52x2/fec.c
+++ /dev/null
@@ -1,605 +0,0 @@
-/*
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <malloc.h>
-#include <asm/fec.h>
-
-#ifdef CONFIG_M5271
-#include <asm/m5271.h>
-#include <asm/immap_5271.h>
-#endif
-
-#ifdef CONFIG_M5272
-#include <asm/m5272.h>
-#include <asm/immap_5272.h>
-#endif
-
-#ifdef CONFIG_M5282
-#include <asm/m5282.h>
-#include <asm/immap_5282.h>
-#endif
-
-#include <net.h>
-#include <command.h>
-
-#ifdef CONFIG_M5272
-#define FEC_ADDR (CFG_MBAR + 0x840)
-#endif
-#if defined(CONFIG_M5282) || defined(CONFIG_M5271)
-#define FEC_ADDR (CFG_MBAR + 0x1000)
-#endif
-
-#undef ET_DEBUG
-#undef MII_DEBUG
-
-#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(FEC_ENET)
-
-#ifdef CFG_DISCOVER_PHY
-#include <miiphy.h>
-static void mii_discover_phy (void);
-#endif
-
-/* Ethernet Transmit and Receive Buffers */
-#define DBUF_LENGTH 1520
-
-#define TX_BUF_CNT 2
-
-#define TOUT_LOOP 100
-
-#define PKT_MAXBUF_SIZE 1518
-#define PKT_MINBUF_SIZE 64
-#define PKT_MAXBLR_SIZE 1520
-
-
-static char txbuf[DBUF_LENGTH];
-
-static uint rxIdx; /* index of the current RX buffer */
-static uint txIdx; /* index of the current TX buffer */
-
-/*
- * FEC Ethernet Tx and Rx buffer descriptors allocated at the
- * immr->udata_bd address on Dual-Port RAM
- * Provide for Double Buffering
- */
-
-typedef volatile struct CommonBufferDescriptor {
- cbd_t rxbd[PKTBUFSRX]; /* Rx BD */
- cbd_t txbd[TX_BUF_CNT]; /* Tx BD */
-} RTXBD;
-
-static RTXBD *rtx = NULL;
-
-int eth_send (volatile void *packet, int length)
-{
- int j, rc;
- volatile fec_t *fecp = (fec_t *) (FEC_ADDR);
-
- /* section 16.9.23.3
- * Wait for ready
- */
- j = 0;
- while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY)
- && (j < TOUT_LOOP)) {
- udelay (1);
- j++;
- }
- if (j >= TOUT_LOOP) {
- printf ("TX not ready\n");
- }
-
- rtx->txbd[txIdx].cbd_bufaddr = (uint) packet;
- rtx->txbd[txIdx].cbd_datlen = length;
- rtx->txbd[txIdx].cbd_sc |= BD_ENET_TX_READY | BD_ENET_TX_LAST;
-
- /* Activate transmit Buffer Descriptor polling */
- fecp->fec_x_des_active = 0x01000000; /* Descriptor polling active */
-
- j = 0;
- while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY)
- && (j < TOUT_LOOP)) {
- udelay (1);
- j++;
- }
- if (j >= TOUT_LOOP) {
- printf ("TX timeout\n");
- }
-#ifdef ET_DEBUG
- printf ("%s[%d] %s: cycles: %d status: %x retry cnt: %d\n",
- __FILE__, __LINE__, __FUNCTION__, j, rtx->txbd[txIdx].cbd_sc,
- (rtx->txbd[txIdx].cbd_sc & 0x003C) >> 2);
-#endif
-
- /* return only status bits */ ;
- rc = (rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_STATS);
-
- txIdx = (txIdx + 1) % TX_BUF_CNT;
-
- return rc;
-}
-
-int eth_rx (void)
-{
- int length;
- volatile fec_t *fecp = (fec_t *) FEC_ADDR;
-
- for (;;) {
- /* section 16.9.23.2 */
- if (rtx->rxbd[rxIdx].cbd_sc & BD_ENET_RX_EMPTY) {
- length = -1;
- break; /* nothing received - leave for() loop */
- }
-
- length = rtx->rxbd[rxIdx].cbd_datlen;
-
- if (rtx->rxbd[rxIdx].cbd_sc & 0x003f) {
-#ifdef ET_DEBUG
- printf ("%s[%d] err: %x\n",
- __FUNCTION__, __LINE__,
- rtx->rxbd[rxIdx].cbd_sc);
-#endif
- } else {
- /* Pass the packet up to the protocol layers. */
- NetReceive (NetRxPackets[rxIdx], length - 4);
- }
-
- /* Give the buffer back to the FEC. */
- rtx->rxbd[rxIdx].cbd_datlen = 0;
-
- /* wrap around buffer index when necessary */
- if ((rxIdx + 1) >= PKTBUFSRX) {
- rtx->rxbd[PKTBUFSRX - 1].cbd_sc =
- (BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY);
- rxIdx = 0;
- } else {
- rtx->rxbd[rxIdx].cbd_sc = BD_ENET_RX_EMPTY;
- rxIdx++;
- }
-
- /* Try to fill Buffer Descriptors */
- fecp->fec_r_des_active = 0x01000000; /* Descriptor polling active */
- }
-
- return length;
-}
-
-/**************************************************************
- *
- * FEC Ethernet Initialization Routine
- *
- *************************************************************/
-#define FEC_ECNTRL_ETHER_EN 0x00000002
-#define FEC_ECNTRL_RESET 0x00000001
-
-#define FEC_RCNTRL_BC_REJ 0x00000010
-#define FEC_RCNTRL_PROM 0x00000008
-#define FEC_RCNTRL_MII_MODE 0x00000004
-#define FEC_RCNTRL_DRT 0x00000002
-#define FEC_RCNTRL_LOOP 0x00000001
-
-#define FEC_TCNTRL_FDEN 0x00000004
-#define FEC_TCNTRL_HBC 0x00000002
-#define FEC_TCNTRL_GTS 0x00000001
-
-#define FEC_RESET_DELAY 50000
-
-int eth_init (bd_t * bd)
-{
-#ifndef CFG_ENET_BD_BASE
- DECLARE_GLOBAL_DATA_PTR;
-#endif
- int i;
- volatile fec_t *fecp = (fec_t *) (FEC_ADDR);
-
- /* Whack a reset.
- * A delay is required between a reset of the FEC block and
- * initialization of other FEC registers because the reset takes
- * some time to complete. If you don't delay, subsequent writes
- * to FEC registers might get killed by the reset routine which is
- * still in progress.
- */
- fecp->fec_ecntrl = FEC_ECNTRL_RESET;
- for (i = 0;
- (fecp->fec_ecntrl & FEC_ECNTRL_RESET) && (i < FEC_RESET_DELAY);
- ++i) {
- udelay (1);
- }
- if (i == FEC_RESET_DELAY) {
- printf ("FEC_RESET_DELAY timeout\n");
- return 0;
- }
-
- /* We use strictly polling mode only
- */
- fecp->fec_imask = 0;
-
- /* Clear any pending interrupt */
- fecp->fec_ievent = 0xffffffff;
-
- /* Set station address */
-#define ea bd->bi_enetaddr
- fecp->fec_addr_low = (ea[0] << 24) | (ea[1] << 16) |
- (ea[2] << 8) | (ea[3]);
- fecp->fec_addr_high = (ea[4] << 24) | (ea[5] << 16);
-#ifdef ET_DEBUG
- printf ("Eth Addrs: %02x:%02x:%02x:%02x:%02x:%02x\n",
- ea[0], ea[1], ea[2], ea[3], ea[4], ea[5]);
-#endif
-#undef ea
-
-#ifdef CONFIG_M5271
- /* Clear multicast address hash table
- */
- fecp->fec_ghash_table_high = 0;
- fecp->fec_ghash_table_low = 0;
-
- /* Clear individual address hash table
- */
- fecp->fec_ihash_table_high = 0;
- fecp->fec_ihash_table_low = 0;
-#else
- /* Clear multicast address hash table
- */
-#ifdef CONFIG_M5282
- fecp->fec_ihash_table_high = 0;
- fecp->fec_ihash_table_low = 0;
-#else
- fecp->fec_hash_table_high = 0;
- fecp->fec_hash_table_low = 0;
-#endif
-#endif
-
- /* Set maximum receive buffer size.
- */
- fecp->fec_r_buff_size = PKT_MAXBLR_SIZE;
-
- /*
- * Setup Buffers and Buffer Desriptors
- */
- rxIdx = 0;
- txIdx = 0;
-
- if (!rtx) {
-#ifdef CFG_ENET_BD_BASE
- rtx = (RTXBD *) CFG_ENET_BD_BASE;
-#else
- rtx = (RTXBD *) (CFG_MONITOR_BASE+gd->reloc_off -
- (((PKTBUFSRX+TX_BUF_CNT)*+sizeof(cbd_t)
- +0xFF)
- & ~0xFF)
- );
- debug("set ENET_DB_BASE to %lX\n",(long) rtx);
-#endif
- }
-
- /*
- * Setup Receiver Buffer Descriptors (13.14.24.18)
- * Settings:
- * Empty, Wrap
- */
- for (i = 0; i < PKTBUFSRX; i++) {
- rtx->rxbd[i].cbd_sc = BD_ENET_RX_EMPTY;
- rtx->rxbd[i].cbd_datlen = 0; /* Reset */
- rtx->rxbd[i].cbd_bufaddr = (uint) NetRxPackets[i];
- }
- rtx->rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP;
-
- /*
- * Setup Ethernet Transmitter Buffer Descriptors (13.14.24.19)
- * Settings:
- * Last, Tx CRC
- */
- for (i = 0; i < TX_BUF_CNT; i++) {
- rtx->txbd[i].cbd_sc = BD_ENET_TX_LAST | BD_ENET_TX_TC;
- rtx->txbd[i].cbd_datlen = 0; /* Reset */
- rtx->txbd[i].cbd_bufaddr = (uint) (&txbuf[0]);
- }
- rtx->txbd[TX_BUF_CNT - 1].cbd_sc |= BD_ENET_TX_WRAP;
-
- /* Set receive and transmit descriptor base
- */
- fecp->fec_r_des_start = (unsigned int) (&rtx->rxbd[0]);
- fecp->fec_x_des_start = (unsigned int) (&rtx->txbd[0]);
-
- /* Enable MII mode
- */
-
-#if 0 /* Full duplex mode */
- fecp->fec_r_cntrl = FEC_RCNTRL_MII_MODE;
- fecp->fec_x_cntrl = FEC_TCNTRL_FDEN;
-#else /* Half duplex mode */
- fecp->fec_r_cntrl = (PKT_MAXBUF_SIZE << 16); /* set max frame length */
- fecp->fec_r_cntrl |= FEC_RCNTRL_MII_MODE | FEC_RCNTRL_DRT;
- fecp->fec_x_cntrl = 0;
-#endif
- /* Set MII speed */
- fecp->fec_mii_speed = (((CFG_CLK / 2) / (2500000 / 10)) + 5) / 10;
- fecp->fec_mii_speed *= 2;
-
- /* Configure port B for MII.
- */
- /* port initialization was already made in cpu_init_f() */
-
- /* Now enable the transmit and receive processing
- */
- fecp->fec_ecntrl = FEC_ECNTRL_ETHER_EN;
-
-#ifdef CFG_DISCOVER_PHY
- /* wait for the PHY to wake up after reset */
- mii_discover_phy ();
-#endif
-
- /* And last, try to fill Rx Buffer Descriptors */
- fecp->fec_r_des_active = 0x01000000; /* Descriptor polling active */
-
- return 1;
-}
-
-void eth_halt (void)
-{
- volatile fec_t *fecp = (fec_t *) FEC_ADDR;
-
- fecp->fec_ecntrl = 0;
-}
-
-
-#if defined(CFG_DISCOVER_PHY) || (CONFIG_COMMANDS & CFG_CMD_MII)
-
-static int phyaddr = -1; /* didn't find a PHY yet */
-static uint phytype;
-
-/* Make MII read/write commands for the FEC.
-*/
-
-#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | \
- (REG & 0x1f) << 18))
-
-#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | \
- (REG & 0x1f) << 18) | \
- (VAL & 0xffff))
-
-/* Interrupt events/masks.
-*/
-#define FEC_ENET_HBERR ((uint)0x80000000) /* Heartbeat error */
-#define FEC_ENET_BABR ((uint)0x40000000) /* Babbling receiver */
-#define FEC_ENET_BABT ((uint)0x20000000) /* Babbling transmitter */
-#define FEC_ENET_GRA ((uint)0x10000000) /* Graceful stop complete */
-#define FEC_ENET_TXF ((uint)0x08000000) /* Full frame transmitted */
-#define FEC_ENET_TXB ((uint)0x04000000) /* A buffer was transmitted */
-#define FEC_ENET_RXF ((uint)0x02000000) /* Full frame received */
-#define FEC_ENET_RXB ((uint)0x01000000) /* A buffer was received */
-#define FEC_ENET_MII ((uint)0x00800000) /* MII interrupt */
-#define FEC_ENET_EBERR ((uint)0x00400000) /* SDMA bus error */
-
-/* PHY identification
- */
-#define PHY_ID_LXT970 0x78100000 /* LXT970 */
-#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */
-#define PHY_ID_82555 0x02a80150 /* Intel 82555 */
-#define PHY_ID_QS6612 0x01814400 /* QS6612 */
-#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */
-#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */
-#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */
-
-/* send command to phy using mii, wait for result */
-static uint mii_send (uint mii_cmd)
-{
- uint mii_reply;
- volatile fec_t *ep = (fec_t *) (FEC_ADDR);
-
- ep->fec_mii_data = mii_cmd; /* command to phy */
-
- /* wait for mii complete */
- while (!(ep->fec_ievent & FEC_ENET_MII)); /* spin until done */
- mii_reply = ep->fec_mii_data; /* result from phy */
- ep->fec_ievent = FEC_ENET_MII; /* clear MII complete */
-#ifdef ET_DEBUG
- printf ("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
- __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
-#endif
- return (mii_reply & 0xffff); /* data read from phy */
-}
-#endif /* CFG_DISCOVER_PHY || (CONFIG_COMMANDS & CFG_CMD_MII) */
-
-#if defined(CFG_DISCOVER_PHY)
-static void mii_discover_phy (void)
-{
-#define MAX_PHY_PASSES 11
- uint phyno;
- int pass;
-
- phyaddr = -1; /* didn't find a PHY yet */
- for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
- if (pass > 1) {
- /* PHY may need more time to recover from reset.
- * The LXT970 needs 50ms typical, no maximum is
- * specified, so wait 10ms before try again.
- * With 11 passes this gives it 100ms to wake up.
- */
- udelay (10000); /* wait 10ms */
- }
- for (phyno = 1; phyno < 32 && phyaddr < 0; ++phyno) {
- phytype = mii_send (mk_mii_read (phyno, PHY_PHYIDR1));
-#ifdef ET_DEBUG
- printf ("PHY type 0x%x pass %d type ", phytype, pass);
-#endif
- if (phytype != 0xffff) {
- phyaddr = phyno;
- phytype <<= 16;
- phytype |= mii_send (mk_mii_read (phyno,
- PHY_PHYIDR2));
-
-#ifdef ET_DEBUG
- printf ("PHY @ 0x%x pass %d type ", phyno,
- pass);
- switch (phytype & 0xfffffff0) {
- case PHY_ID_LXT970:
- printf ("LXT970\n");
- break;
- case PHY_ID_LXT971:
- printf ("LXT971\n");
- break;
- case PHY_ID_82555:
- printf ("82555\n");
- break;
- case PHY_ID_QS6612:
- printf ("QS6612\n");
- break;
- case PHY_ID_AMD79C784:
- printf ("AMD79C784\n");
- break;
- case PHY_ID_LSI80225B:
- printf ("LSI L80225/B\n");
- break;
- default:
- printf ("0x%08x\n", phytype);
- break;
- }
-#endif
- }
- }
- }
- if (phyaddr < 0) {
- printf ("No PHY device found.\n");
- }
-}
-#endif /* CFG_DISCOVER_PHY */
-
-#if (CONFIG_COMMANDS & CFG_CMD_MII) && !defined(CONFIG_BITBANGMII)
-
-static int mii_init_done = 0;
-
-/****************************************************************************
- * mii_init -- Initialize the MII for MII command without ethernet
- * This function is a subset of eth_init
- ****************************************************************************
- */
-void mii_init (void)
-{
- volatile fec_t *fecp = (fec_t *) (FEC_ADDR);
-
- int i;
-
- if (mii_init_done != 0) {
- return;
- }
-
- /* Whack a reset.
- * A delay is required between a reset of the FEC block and
- * initialization of other FEC registers because the reset takes
- * some time to complete. If you don't delay, subsequent writes
- * to FEC registers might get killed by the reset routine which is
- * still in progress.
- */
-
- fecp->fec_ecntrl = FEC_ECNTRL_RESET;
- for (i = 0;
- (fecp->fec_ecntrl & FEC_ECNTRL_RESET) && (i < FEC_RESET_DELAY);
- ++i) {
- udelay (1);
- }
- if (i == FEC_RESET_DELAY) {
- printf ("FEC_RESET_DELAY timeout\n");
- return;
- }
-
- /* We use strictly polling mode only
- */
- fecp->fec_imask = 0;
-
- /* Clear any pending interrupt
- */
- fecp->fec_ievent = 0xffffffff;
-
- /* Set MII speed */
- fecp->fec_mii_speed = 0x0e;
-
- /* Configure port B for MII.
- */
- /* port initialization was already made in cpu_init_f() */
-
- /* Now enable the transmit and receive processing */
- fecp->fec_ecntrl = FEC_ECNTRL_ETHER_EN;
-
- mii_init_done = 1;
-}
-
-/*****************************************************************************
- * Read and write a MII PHY register, routines used by MII Utilities
- *
- * FIXME: These routines are expected to return 0 on success, but mii_send
- * does _not_ return an error code. Maybe 0xFFFF means error, i.e.
- * no PHY connected...
- * For now always return 0.
- * FIXME: These routines only work after calling eth_init() at least once!
- * Otherwise they hang in mii_send() !!! Sorry!
- *****************************************************************************/
-
-int mcf52x2_miiphy_read (char *devname, unsigned char addr,
- unsigned char reg, unsigned short *value)
-{
- short rdreg; /* register working value */
-
-#ifdef MII_DEBUG
- printf ("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
-#endif
- rdreg = mii_send (mk_mii_read (addr, reg));
-
- *value = rdreg;
-
-#ifdef MII_DEBUG
- printf ("0x%04x\n", *value);
-#endif
-
- return 0;
-}
-
-int mcf52x2_miiphy_write (char *devname, unsigned char addr,
- unsigned char reg, unsigned short value)
-{
- short rdreg; /* register working value */
-
-#ifdef MII_DEBUG
- printf ("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
-#endif
-
- rdreg = mii_send (mk_mii_write (addr, reg, value));
-
-#ifdef MII_DEBUG
- printf ("0x%04x\n", value);
-#endif
-
- return 0;
-}
-#endif /* (CONFIG_COMMANDS & CFG_CMD_MII) && !defined(CONFIG_BITBANGMII) */
-#endif /* CFG_CMD_NET, FEC_ENET */
-
-int mcf52x2_miiphy_initialize(bd_t *bis)
-{
-#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(FEC_ENET)
-#if (CONFIG_COMMANDS & CFG_CMD_MII) && !defined(CONFIG_BITBANGMII)
- miiphy_register("mcf52x2phy", mcf52x2_miiphy_read, mcf52x2_miiphy_write);
-#endif
-#endif
- return 0;
-}
generated by cgit v1.2.3 (git 2.39.1) at 2024-06-03 11:42:10 +0000