diff options
Diffstat (limited to 'include/asm-microblaze/arch-microblaze/xuartlite_l.h')
| -rw-r--r-- | include/asm-microblaze/arch-microblaze/xuartlite_l.h | 256 |
1 files changed, 256 insertions, 0 deletions
diff --git a/include/asm-microblaze/arch-microblaze/xuartlite_l.h b/include/asm-microblaze/arch-microblaze/xuartlite_l.h new file mode 100644 index 000000000..b381a0d7b --- /dev/null +++ b/include/asm-microblaze/arch-microblaze/xuartlite_l.h @@ -0,0 +1,256 @@ +/***************************************************************************** +* +* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" +* AS A COURTESY TO YOU, SOLELY FOR USE IN DEVELOPING PROGRAMS AND +* SOLUTIONS FOR XILINX DEVICES. BY PROVIDING THIS DESIGN, CODE, +* OR INFORMATION AS ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, +* APPLICATION OR STANDARD, XILINX IS MAKING NO REPRESENTATION +* THAT THIS IMPLEMENTATION IS FREE FROM ANY CLAIMS OF INFRINGEMENT, +* AND YOU ARE RESPONSIBLE FOR OBTAINING ANY RIGHTS YOU MAY REQUIRE +* FOR YOUR IMPLEMENTATION. XILINX EXPRESSLY DISCLAIMS ANY +* WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE +* IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR +* REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF +* INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +* FOR A PARTICULAR PURPOSE. +* +* (c) Copyright 2002 Xilinx Inc. +* All rights reserved. +* +*****************************************************************************/ +/****************************************************************************/ +/** +* +* @file xuartlite_l.h +* +* This header file contains identifiers and low-level driver functions (or +* macros) that can be used to access the device. High-level driver functions +* are defined in xuartlite.h. +* +* <pre> +* MODIFICATION HISTORY: +* +* Ver Who Date Changes +* ----- ---- -------- ----------------------------------------------- +* 1.00b rpm 04/25/02 First release +* </pre> +* +*****************************************************************************/ + +#ifndef XUARTLITE_L_H /* prevent circular inclusions */ +#define XUARTLITE_L_H /* by using protection macros */ + +/***************************** Include Files ********************************/ + +#include "xbasic_types.h" +#include "xio.h" + +/************************** Constant Definitions ****************************/ + +/* UART Lite register offsets */ + +#define XUL_RX_FIFO_OFFSET 0 /* receive FIFO, read only */ +#define XUL_TX_FIFO_OFFSET 4 /* transmit FIFO, write only */ +#define XUL_STATUS_REG_OFFSET 8 /* status register, read only */ +#define XUL_CONTROL_REG_OFFSET 12 /* control register, write only */ + +/* control register bit positions */ + +#define XUL_CR_ENABLE_INTR 0x10 /* enable interrupt */ +#define XUL_CR_FIFO_RX_RESET 0x02 /* reset receive FIFO */ +#define XUL_CR_FIFO_TX_RESET 0x01 /* reset transmit FIFO */ + +/* status register bit positions */ + +#define XUL_SR_PARITY_ERROR 0x80 +#define XUL_SR_FRAMING_ERROR 0x40 +#define XUL_SR_OVERRUN_ERROR 0x20 +#define XUL_SR_INTR_ENABLED 0x10 /* interrupt enabled */ +#define XUL_SR_TX_FIFO_FULL 0x08 /* transmit FIFO full */ +#define XUL_SR_TX_FIFO_EMPTY 0x04 /* transmit FIFO empty */ +#define XUL_SR_RX_FIFO_FULL 0x02 /* receive FIFO full */ +#define XUL_SR_RX_FIFO_VALID_DATA 0x01 /* data in receive FIFO */ + +/* the following constant specifies the size of the FIFOs, the size of the + * FIFOs includes the transmitter and receiver such that it is the total number + * of bytes that the UART can buffer + */ +#define XUL_FIFO_SIZE 16 + +/* Stop bits are fixed at 1. Baud, parity, and data bits are fixed on a + * per instance basis + */ +#define XUL_STOP_BITS 1 + +/* Parity definitions + */ +#define XUL_PARITY_NONE 0 +#define XUL_PARITY_ODD 1 +#define XUL_PARITY_EVEN 2 + +/**************************** Type Definitions ******************************/ + +/***************** Macros (Inline Functions) Definitions ********************/ + +/***************************************************************************** +* +* Low-level driver macros and functions. The list below provides signatures +* to help the user use the macros. +* +* void XUartLite_mSetControlReg(u32 BaseAddress, u32 Mask) +* u32 XUartLite_mGetControlReg(u32 BaseAddress) +* u32 XUartLite_mGetStatusReg(u32 BaseAddress) +* +* Xboolean XUartLite_mIsReceiveEmpty(u32 BaseAddress) +* Xboolean XUartLite_mIsTransmitFull(u32 BaseAddress) +* Xboolean XUartLite_mIsIntrEnabled(u32 BaseAddress) +* +* void XUartLite_mEnableIntr(u32 BaseAddress) +* void XUartLite_mDisableIntr(u32 BaseAddress) +* +* void XUartLite_SendByte(u32 BaseAddress, u8 Data); +* u8 XUartLite_RecvByte(u32 BaseAddress); +* +*****************************************************************************/ + +/****************************************************************************/ +/** +* +* Set the contents of the control register. Use the XUL_CR_* constants defined +* above to create the bit-mask to be written to the register. +* +* @param BaseAddress is the base address of the device +* @param Mask is the 32-bit value to write to the control register +* +* @return None. +* +* @note None. +* +*****************************************************************************/ +#define XUartLite_mSetControlReg(BaseAddress, Mask) \ + XIo_Out32((BaseAddress) + XUL_CONTROL_REG_OFFSET, (Mask)) + + +/****************************************************************************/ +/** +* +* Get the contents of the control register. Use the XUL_CR_* constants defined +* above to interpret the bit-mask returned. +* +* @param BaseAddress is the base address of the device +* +* @return A 32-bit value representing the contents of the control register. +* +* @note None. +* +*****************************************************************************/ +#define XUartLite_mGetControlReg(BaseAddress) \ + XIo_In32((BaseAddress) + XUL_CONTROL_REG_OFFSET) + + +/****************************************************************************/ +/** +* +* Get the contents of the status register. Use the XUL_SR_* constants defined +* above to interpret the bit-mask returned. +* +* @param BaseAddress is the base address of the device +* +* @return A 32-bit value representing the contents of the status register. +* +* @note None. +* +*****************************************************************************/ +#define XUartLite_mGetStatusReg(BaseAddress) \ + XIo_In32((BaseAddress) + XUL_STATUS_REG_OFFSET) + + +/****************************************************************************/ +/** +* +* Check to see if the receiver has data. +* +* @param BaseAddress is the base address of the device +* +* @return XTRUE if the receiver is empty, XFALSE if there is data present. +* +* @note None. +* +*****************************************************************************/ +#define XUartLite_mIsReceiveEmpty(BaseAddress) \ + (!(XUartLite_mGetStatusReg((BaseAddress)) & XUL_SR_RX_FIFO_VALID_DATA)) + + +/****************************************************************************/ +/** +* +* Check to see if the transmitter is full. +* +* @param BaseAddress is the base address of the device +* +* @return XTRUE if the transmitter is full, XFALSE otherwise. +* +* @note None. +* +*****************************************************************************/ +#define XUartLite_mIsTransmitFull(BaseAddress) \ + (XUartLite_mGetStatusReg((BaseAddress)) & XUL_SR_TX_FIFO_FULL) + + +/****************************************************************************/ +/** +* +* Check to see if the interrupt is enabled. +* +* @param BaseAddress is the base address of the device +* +* @return XTRUE if the interrupt is enabled, XFALSE otherwise. +* +* @note None. +* +*****************************************************************************/ +#define XUartLite_mIsIntrEnabled(BaseAddress) \ + (XUartLite_mGetStatusReg((BaseAddress)) & XUL_SR_INTR_ENABLED) + + +/****************************************************************************/ +/** +* +* Enable the device interrupt. Preserve the contents of the control register. +* +* @param BaseAddress is the base address of the device +* +* @return None. +* +* @note None. +* +*****************************************************************************/ +#define XUartLite_mEnableIntr(BaseAddress) \ + XUartLite_mSetControlReg((BaseAddress), \ + XUartLite_mGetControlReg((BaseAddress)) | XUL_CR_ENABLE_INTR) + + +/****************************************************************************/ +/** +* +* Disable the device interrupt. Preserve the contents of the control register. +* +* @param BaseAddress is the base address of the device +* +* @return None. +* +* @note None. +* +*****************************************************************************/ +#define XUartLite_mDisableIntr(BaseAddress) \ + XUartLite_mSetControlReg((BaseAddress), \ + XUartLite_mGetControlReg((BaseAddress)) & ~XUL_CR_ENABLE_INTR) + + +/************************** Function Prototypes *****************************/ + +void XUartLite_SendByte(u32 BaseAddress, u8 Data); +u8 XUartLite_RecvByte(u32 BaseAddress); + + +#endif /* end of protection macro */ |