summaryrefslogtreecommitdiff
path: root/common
AgeCommit message (Collapse)Author
2011-05-30Allowing snowball to work without an environment block in emmc.Mathieu J. Poirier
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
2011-01-28MMC: Remove read-write debug test codeMichael Brandt
This code was added by ST-Ericsson to the mainline code. Remove it, since its whole purpose was for debugging/testing. Furthermore Coverity found 4 defects in it. ST-Ericsson ID: ER 273353 Change-Id: I9e23f399a68c88bc250b280c3bc418da7217f8d3 Signed-off-by: Michael Brandt <michael.brandt@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/13292 Reviewed-by: QATOOLS Reviewed-by: Joakim AXELSSON <joakim.axelsson@stericsson.com> Reviewed-by: Markus HELGESSON <markus.helgesson@stericsson.com>
2011-01-27db8500: Verify signature of kernel before bootingRobert Rosengren
Verification of the kernel and ITP signature before allowing to boot is added. This feature is configurable and by default not activated. MeeGo- built RPM will have this enabled. ST-Ericsson ID: WP275634, ER275440 Change-Id: Ib888f39dd5dca1bc8b7d6e1b002da83a77908b07 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/11415 Tested-by: Robert ROSENGREN <robert.rosengren@stericsson.com> Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com> Reviewed-by: QATOOLS Reviewed-by: Jens WIKLANDER <jens.wiklander@stericsson.com>
2010-12-15Removal of executable permissionRobert Rosengren
General removal of executable permission of built source and header files, i.e. changing permission from 755 to 644. ST-Ericsson ID: None ST-Ericsson FOSS-OUT ID: Trivial Change-Id: Ic3cfc551d1ef1b1f0b5825f9916d1fc15b15b444 Signed-off-by: Robert Rosengren <robert.rosengren@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/10896 Reviewed-by: QATOOLS Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com> Reviewed-by: Joakim AXELSSON <joakim.axelsson@stericsson.com>
2010-12-07SPI: fixed compiler warnings in common/cmd_spi.cMarkus Helgesson
Fixed compiler warnings in common/cmd_spi.c. ST-Ericsson ID: 269867 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I78b973ca5e1e5ae5de8058abff897ff2cf545574 Signed-off-by: Markus Helgesson <markus.helgesson@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/9520 Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
2010-11-08Rework env_emmcSebastian Rasmussen
Use TOC functionality instead of hardcoded environment addresses to make it easier to move the U-boot environment configuration to other locations in the flash memory. ST-Ericsson ID: 270847 ST-Ericsson FOSS-OUT ID: STETL-FOSS-OUT-10009 Change-Id: If70d56587d47afdc60a2e50e85d0de13cdf556cc Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com> Signed-off-by: Sebastian Rasmussen <sebastian.rasmussen@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/7761 Reviewed-by: Simon SJOLANDER <simon.sjolander@stericsson.com> Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com> Reviewed-by: Patrik RYD <patrik.ryd@stericsson.com> Reviewed-by: Mikael GULLBERG <mikael.xx.gullberg@stericsson.com> Tested-by: Patrik RYD <patrik.ryd@stericsson.com>
2010-11-02SPI: Extended functionality for sspi commandMarkus Helgesson
Modified command line command sspi to allow a more flexible testing. Previous hard coded values are now run time configurable as optional parameters to sppi to allow a more flexible use (like testing more than one SPI bus without rebuilding). The old hard coded values are the default values for the optional parameters so the old behaviour will still work as expected. ST-Ericsson ID: 269867 Change-Id: I08678886c1ed6f6bc78ae94721e2b1ccde3d1e9d Signed-off-by: Markus Helgesson <markus.helgesson@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/7603 Reviewed-by: Rikard OLSSON <rikard.p.olsson@stericsson.com> Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
2010-10-21Replace MAX_CMDBUF_SIZE references with CONFIG_SYS_CBSIZEPeter Tyser
The MAX_CMDBUF_SIZE define is unneeded as it should always equal CONFIG_SYS_CBSIZE. Change-Id: I90a9dedb48478d39e3fd112a892f9dca73116b5e Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/6819 Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com> Tested-by: Michael BRANDT <michael.brandt@stericsson.com> Reviewed-by: Mikael LARSSON <mikael.xt.larsson@stericsson.com>
2010-10-21cmd editing: optimize/shrink output blankingMike Frysinger
No need to output spaces 1 char at a time in a loop when the printf code can do the same thing with the right format string. This shrinks things and gives a nice speed up when killing off lines more than a byte or two as printf will send out the buffer in one big chunk. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Change-Id: Ic1e4eb92b6d9c61efec585433152c907e449fe44 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/6818 Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com> Tested-by: Michael BRANDT <michael.brandt@stericsson.com>
2010-10-21FIX: watchdog timeout, while waiting for inputJens Scharsig
* add WATCHDOG_RESET to !tstc() loops * prevents watchdog timeout, while waiting for input, if CONFIG_BOOT_RETRY_TIME or CONFIG_SHOW_ACTIVITY defined Signed-off-by: Jens Scharsig <js_at_ng@scharsoft.de> Change-Id: I78493dddbae5293c4f0690ee05837c3818456c70 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/6817 Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com> Tested-by: Michael BRANDT <michael.brandt@stericsson.com>
2010-10-21cmd history: Match history buffer size to console bufferJohn Schmoller
Match history buffer size to console buffer size. History buffer size was hard coded to 256, artificially limiting the command buffer size. The history buffer now tracks CONFIG_SYS_CBSIZE. Signed-off-by: John Schmoller <jschmoller@xes-inc.com> Change-Id: I3001f40c7637fe4ed16b7ac7e05524d8905d66e5 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/6816 Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com> Tested-by: Michael BRANDT <michael.brandt@stericsson.com>
2010-10-21console: Fix console buffer overrunJohn Schmoller
When CONFIG_SYS_CBSIZE equals MAX_CMDBUF_SIZE, a command string of maximum length will overwrite part of the history buffer, causing the board to die. Expand the console_buffer and hist_lines buffer by one character each to hold the missing NULL char. Signed-off-by: John Schmoller <jschmoller@xes-inc.com> Change-Id: I6ec005d373e81353aa09d3cd3962f279629e7681 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/6815 Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com> Tested-by: Michael BRANDT <michael.brandt@stericsson.com>
2010-10-21Move CONFIG_UPDATE_TFTP code after CONFIG_PREBOOTWolfgang Denk
The auto-update feature (CONFIG_UPDATE_TFTP) requires that the env variable serverip be set for the TFTP access. If DHCP is to be used to get the serverip env variable, this doesn't work as DHCP happens after the auto-update attempt has run. A solution is to run DHCP in PREBOOT, but even this is too late. To solve this, we move update_tftp() below the PREBOOT stuff. Signed-off-by: Wolfgang Denk <wd@denx.de> Change-Id: I966d6c549e172c183f6ea894eb29440c1df4bf46 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/6814 Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com> Tested-by: Michael BRANDT <michael.brandt@stericsson.com> Reviewed-by: Mikael LARSSON <mikael.xt.larsson@stericsson.com> Reviewed-by: Joakim AXELSSON <joakim.axelsson@stericsson.com>
2010-10-01Adding blkdevparts commandPeter Nessrup
New command for reading out partitions from the sub TOC to build up the blkdevparts env var. This is to be passed to the kernel via the kernel command line Use CONFIG_CMD_BLKDEVPARTS to enable the feature. This command requires th CONFIG_TOC_PARTITION flag to be set Change-Id: Icf114fa38f0b35ef47d00d385b6e19596a8f6167 Signed-off-by: Peter Nessrup <peter.nessrup@stericsson.com> Change-Id: Id2892a35ebaaab5d778a8f0878127721fff5767e Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/5394 Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com> Reviewed-by: Mikael LARSSON <mikael.xt.larsson@stericsson.com> Reviewed-by: ulf hansson <ulf.hansson@stericsson.com>
2010-09-28ITP loadingMikael Larsson
This adds functionality to load and execute ITP in an early stage just after eMMC init. eMMC init was moved to mmc_host.c since it fits better there and is needed in order to access ITP before loading env. Flag for functionality is CONFIG_ITP_LOAD. This functionailty depends on CONFIG_TOC_PARTITION ST-Ericsson ID: ER273744 Change-Id: Ia80f0bf2d67055045c95e47473b9ba2275bbdb83 Signed-off-by: Mikael LARSSON <mikael.xt.larsson@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/5130 Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com> Reviewed-by: Ulf HANSSON <ulf.hansson@stericsson.com>
2010-09-28Added output env var Size and Offset in tocload commandPeter Nessrup
tocentrysize and tocentryoffset are now output as env vars from the tocload command Change-Id: I3fe3918c48bb6ab196100d4cc617569a829803c6 Signed-off-by: Peter Nessrup <peter.nessrup@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/5673 Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com> Reviewed-by: Sebastian RASMUSSEN <sebastian.rasmussen@stericsson.com> Reviewed-by: Ulf HANSSON <ulf.hansson@stericsson.com>
2010-09-20Added TOC commandsPeter Nessrup
TOC commands added under common to be able to print the TOC and sub TOC and to be able to load whatever a TOC entry points to into RAM at the address specified in the TOC entry loadaddr field New file: cmd_toc.c CONFIG_TOC_PARTITION needs to be set for it to be available ST-Ericsson ID: ER256835 Change-Id: I826337e2608076fad74b1a7125d7e93b5ad66e43 Signed-off-by: Peter Nessrup <peter.nessrup@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/5112 Reviewed-by: Ulf HANSSON <ulf.hansson@stericsson.com> Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
2010-09-16boottime: Enable boot time measurements.Jonas Aaberg
This patch enables boot time measurements for u-boot. It also includes minor updates as well. Change-Id: I993c9ad4fa5dab62df2c0a88454a7546d9565d21 Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/4610 Reviewed-by: Robert ROSENGREN <robert.rosengren@stericsson.com> Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
2010-08-30Read/write VFAT support from Rockbox-3.3 FAT stackMichael Brandt
Add read/write VFAT support from Rockbox-3.3 FAT stack. It should be also applicable to the unmodified 2009.11 U-Boot release. Note that is was taken as is from Rockbox and from a older U-Boot Rockbox patch. "checkpatch" shows very many coding style errors and warnings, but it is tedious work to clean this up. To make this patch work an additional mmc_block_write() board support routine and the errno variable are needed. Furthermore following defines in the board config header file: #define CONFIG_ROCKBOX_FAT 1 #define CONFIG_U_BOOT 1 #define CONFIG_SUPPORT_VFAT 1 #define CONFIG_CMD_TREE_FAT This will be added in a follow-up patch. This patch is based on the patch from Etienne Carriere <etienne.carriere@stericsson.com> for the U671x U-Boot: This commit adds FAT write support to u-boot native read-only FAT code. Commit initially applied on u-boot-v2009.01 (SHA1: 72d15e705bc3983884105cb7755c7ba80e74a0a5) Based on FAT stack dumped from Rockbox package v3.1 (www.rockbox.org). Based on initial Rockbox FAT stack integration in u-boot by Keith Outwater (outwater@comcast.net). Current porting is aligned with Rockbox v3.3 FAT stack. Enable upon config switches: CONFIG_CMD_FAT CONFIG_ROCKBOX_FAT CONFIG_CMD_TREE_FAT (recommended) CONFIG_SUPPORT_VFAT (recommended) C code APIs (from U-boot native FAT support): int fat_register_device(block_dev_desc_t *dev_desc, int part_no); long file_fat_read(const char *path, void *buf, unsigned long maxsize); int file_fat_ls(const char *dirname); int file_fat_detectfs(void); C code APIs (added by Rockbox FAT support): long file_fat_write(const char *path, void *buf, unsigned long maxsize); int file_fat_rm(const char *path); int file_fat_rmdir(const char *path); int file_fat_mkdir(const char *path); int file_fat_cd(const char *path); int file_fat_pwd(void); int file_fat_mv(const char *oldpath, const char *newpath); unsigned int rockbox_fat_free(unsigned long size_kbyte); unsigned int rockbox_fat_size(void); Use "help fat" from u-boot console to see available commands. ST-Ericsson ID: WP264488 Change-Id: I9afc29ecb80f9152bd8534bbf11e47e54cfad796 Signed-off-by: Michael Brandt <michael.brandt@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/3009
2010-08-30U-boot: MMC update.Martin LUNDHOLM
MMC has been updated with several improvements. Primarily MMC performance has been improved by using assembler code for low level FIFO handling. Also some MMC functionality has been added, e.g. support for DDR and reliable write. Data and command delay times were incremented, otherwise hangups and timeouts were observed. Tested on HREF+ 1.1 V21 and HREF+ 1.1 V32 (Micron PoP). Following WP depends on this change (more reliable SD card write support): ST-Ericsson ID: WP264488 Change-Id: Ic92abffe1640aa9375b8d43a6b8522ca8296a368 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/4056 Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com> Tested-by: Michael BRANDT <michael.brandt@stericsson.com>
2010-08-11Replace MMC/SD driver to fit new framework.Ulf Hansson
IR265772: MMC driver does not detect SDHC cards. IR254201: Restructure MMC/SD driver for U8500 board according to the block device framework in mainline U-Boot. Changes to mmc framework: - Multi Block Read support in mmc framework. - Wrap Multi Block Write/Read to be able to adopt for large transaction. - Removed incorrect check in EXT CSD for high capacity MMC. - Corrected check for high capacity SD cards. - Set MMC buswidth to 8, prio of using 4. Known limitations/bugs in mmc framework: - High capacity MMC, will likely not get the correct density. - High speed is set, whether or not the host supports it or not. board/st/u8500/mmc_utils: IMPORTANT FOR DEVELOPERS: - Removed unessary U-Boot commands which is already supported in cmd_fat. - mmc_read_cmd_file: Read command.txt into bootcmd env from FAT FS in SD card. - write_partition_block: Writes the MBR if it is not already written. board/st/u8500/mmc_host[c.h]: - Implements the entire MMC/SD host driver for the PL180 block. - There is still room for optimization: Increase CLK-speed. Use high-speed for SD cards. Is GPIO setup correctly for both cards an eMMC. EarlyDrop support not fully tested. Dynamically turn on voltage/clocks to SD, not always. More... Note: - Increased read/write performance for eMMC, to around 5.4 MB/s for sequential read/write. Earlier measurements was 3.5 MB/s for read and 2.6 MB/s for write. ST-Ericsson ID: ER265772, CR267996, ER267993 Change-Id: I921102edbde761407ff5ad476d1bb99f5dc7a2ef Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/2288 Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com> Tested-by: Michael BRANDT <michael.brandt@stericsson.com> Reviewed-by: Martin LUNDHOLM <martin.xa.lundholm@stericsson.com> Tested-by: Martin LUNDHOLM <martin.xa.lundholm@stericsson.com> Reviewed-by: Mikael LARSSON <mikael.xt.larsson@stericsson.com> Tested-by: Mikael LARSSON <mikael.xt.larsson@stericsson.com>
2010-07-23boottime: Minor clean up and added u-boot command for displaying the current ↵Jonas Aaberg
boot time status. Change-Id: Ifdfea22cc1d587469a18b22a20c0dc14aeaa49c9 Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/2502 Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
2010-07-23Boottime changes. Moved generic boottime code from lib_arm to common. ↵Jonas Aaberg
Boottime now internally uses us instead of ticks. Reviewed-by: Michael Brandt <michael.brandt@stericsson.com> Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Change-Id: If30d2eb384d6e82daa86c3cab7a6fd2a22baefb5 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/3053 Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
2010-05-24Use proper copyright linesRabin Vincent
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Change-Id: Ieec8e7940e7acdc88d7c17b12007f61841741325 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/390 Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Tested-by: Jonas ABERG <jonas.aberg@stericsson.com>
2010-01-14cmd_ext2.c: removed ext2info commandMichael Brandt
ext2info is not part of the mainline source. Furthermore it was more a mbr_info. I might add it as cmd_mbr.c somewhere else.
2010-01-13Merge branch 'master' of http://git.denx.de/u-bootMichael Brandt
2010-01-06onenand: Fix compile errors due to FlexOneNANDSanjeev Premi
This patch fixes the compile error while trying to compile for omap3evm. env_onenand.c: In function 'env_relocate_spec': env_onenand.c:70: error: 'CONFIG_ENV_ADDR_FLEX' undeclared (first use in this function) env_onenand.c:70: error: (Each undeclared identifier is re ported only once env_onenand.c:70: error: for each function it appears in.) env_onenand.c: In function 'saveenv': env_onenand.c:106: error: 'CONFIG_ENV_ADDR_FLEX' undeclare d (first use in this function) env_onenand.c:107: error: 'CONFIG_ENV_SIZE_FLEX' undeclare d (first use in this function) Signed-off-by: Sanjeev Premi <premi@ti.com> Acked-by: Tom Rix <Tom.Rix@windriver.com>
2009-12-22Merge branch 'master' of http://git.denx.de/u-bootMichael Brandt
Conflicts: include/usb/musb_udc.h
2009-12-21move prototypes for gunzip() and zunzip() to common.hWolfgang Wegner
Prototype for gunzip/zunzip was only in lib_generic/gunzip.c and thus repeated in every file using it. This patch moves the prototypes to common.h and removes all prototypes distributed anywhere else. Signed-off-by: Wolfgang Wegner <w.wegner@astro-kom.de>
2009-12-20usb: write command for RAW partition.Mahavir Jain
This patch implements write support to usb device with raw partition. It will be useful for filesystem write support to usb device from u-boot in future. Tested with writing kernel image to raw usb disk & booting with usb read command into ram. [Note: run usb part to get info about start sector & number of sectors on a partition for usb write operation.] Signed-off-by: Mahavir Jain <mjain@marvell.com>
2009-12-20USB Consolidate descriptor definitionsTom Rix
The header files usb.h and usbdescriptors.h have the same nameed structure definitions for usb_config_descriptor usb_interface_descriptor usb_endpoint_descriptor usb_device_descriptor usb_string_descriptor These are out right duplicates in usb.h usb_device_descriptor usb_string_descriptor This one has extra unused elements usb_endpoint_descriptor unsigned char bRefresh unsigned char bSynchAddress; These in usb.h have extra elements at the end of the usb 2.0 specified descriptor and are used. usb_config_descriptor usb_interface_descriptor The change is to consolidate the definition of the descriptors to usbdescriptors.h. The dublicates in usb.h are removed. The extra element structure will have their name shorted by removing the '_descriptor' suffix. So usb_config_descriptor -> usb_config usb_interface_descriptor -> usb_interface For these, the common descriptor elements are accessed now by an element 'desc'. As an example - if (iface->bInterfaceClass != USB_CLASS_HUB) + if (iface->desc.bInterfaceClass != USB_CLASS_HUB) This has been compile tested on MAKEALL arm, ppc and mips. Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
2009-12-08common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOULHeiko Schocher
There is more and more usage of printing 64bit values, so enable this feature generally, and delete the CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL defines. Signed-off-by: Heiko Schocher <hs@denx.de>
2009-12-08Merge branch 'master' of http://git.denx.de/u-bootMichael Brandt
2009-12-07Merge branch 'master' of ../work into nextWolfgang Denk
2009-12-07i2c: fix dangling comment in do_i2c_mw()Heiko Schocher
commit bd3784df94bfeca43fbf34094df9cb1bd3ecca3b deleted some unused code in do_i2c_mw(), but missed to also remove the respective commment. This patch fixes this. Signed-off-by: Heiko Schocher <hs@denx.de>
2009-12-07Merge branch 'master' into nextWolfgang Denk
Conflicts: lib_generic/zlib.c Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-12-07bootm: Fix help message's sub-command orderingPeter Tyser
The help message for the 'bootm' command listed the 'cmdline' and 'bdt' sub-commands in the wrong order which resulted in the error below when following the 'help' command's instructions: "Trying to execute a command out of order" Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-12-05Merge branch 'master' into nextWolfgang Denk
Conflicts: board/esd/plu405/plu405.c drivers/rtc/ftrtc010.c Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-12-05add lzop decompression supportPeter Korsgaard
Add lzop decompression support to the existing lzo bitstream handling (think gzip versus zlib), and support it for uImage decompression if CONFIG_LZO is enabled. Lzop doesn't compress as good as gzip (~10% worse), but decompression is very fast (~0.7s faster here on a slow ppc). The lzop decompression code is based on Albin Tonnerre's recent ARM Linux lzo support patch. Cc: albin.tonnerre@free-electrons.com Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2009-12-05i386: Fix malloc initializationGraeme Russ
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2009-12-03Merge branch 'master' of http://git.denx.de/u-bootMichael Brandt
2009-12-02Remove superfluous preprocessor tests from some cmd_*.c files.Robert P. J. Day
A small number of common/cmd_*.c files contain preprocessor tests that are apparently superfluous since those same tests are used in the Makefile to control the compilation of those files. Those tests are clearly redundant as long as they surround the entirety of the source in those files. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
2009-12-02Removes dead code in the file common/cmd_i2c.cPratap Chandu
There is some dead code enclosed by #if 0 .... #endif in the file common/cmd_i2c.c This patch removes the dead code. Signed-off-by: Pratap Chandu <pratap.rrke@gmail.com>
2009-12-02cmd_date: Fix spelling in error message.Magnus Lilja
Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
2009-12-02Move do_irqinfo() to common/cmd_irq.cPeter Tyser
cmd_irq.c is a much better home and it is already conditionally compiled based on CONFIG_CMD_IRQ. Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-12-02cmd_license: Remove unneeded #ifdef CONFIG_CMD_LICENSEPeter Tyser
cmd_license is already conditionally compiled at the Makefile-level. Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-12-02circbuf: Move to lib_generic and conditionally compilePeter Tyser
circbuf could be used as a generic library and is only currently needed when CONFIG_USB_TTY is defined. Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-12-02exports: rewrite jump table initMike Frysinger
The current jump table init fails to initialize a bunch of exported symbols (forceenv/do_reset/etc...). Rather than fix just these few missing pieces, rewrite the code to utilize the existing list of exported symbols -- _exports.h. Since every exported symbol has to be listed in this header, it makes sense to use it so that we only ever have one list that needs to be updated and things can't fall out of sync again. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-11-30Merge branch 'master' of http://git.denx.de/u-bootMichael Brandt
2009-11-24bootm: mark local boot_os[] table staticMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-05-02 16:31:34 +0000