| Age | Commit message (Collapse) | Author |
|---|
|
Add read/write VFAT support from Rockbox-3.3 FAT stack.
It should be also applicable to the unmodified 2009.11 U-Boot release.
Note that is was taken as is from Rockbox and from a older U-Boot
Rockbox patch. "checkpatch" shows very many coding style errors and
warnings, but it is tedious work to clean this up.
To make this patch work an additional mmc_block_write() board support
routine and the errno variable are needed.
Furthermore following defines in the board config header file:
#define CONFIG_ROCKBOX_FAT 1
#define CONFIG_U_BOOT 1
#define CONFIG_SUPPORT_VFAT 1
#define CONFIG_CMD_TREE_FAT
This will be added in a follow-up patch.
This patch is based on the patch from Etienne Carriere
<etienne.carriere@stericsson.com> for the U671x U-Boot:
This commit adds FAT write support to u-boot native read-only FAT code.
Commit initially applied on u-boot-v2009.01
(SHA1: 72d15e705bc3983884105cb7755c7ba80e74a0a5)
Based on FAT stack dumped from Rockbox package v3.1 (www.rockbox.org).
Based on initial Rockbox FAT stack integration in u-boot by Keith Outwater
(outwater@comcast.net).
Current porting is aligned with Rockbox v3.3 FAT stack.
Enable upon config switches:
CONFIG_CMD_FAT
CONFIG_ROCKBOX_FAT
CONFIG_CMD_TREE_FAT (recommended)
CONFIG_SUPPORT_VFAT (recommended)
C code APIs (from U-boot native FAT support):
int fat_register_device(block_dev_desc_t *dev_desc, int part_no);
long file_fat_read(const char *path, void *buf, unsigned long maxsize);
int file_fat_ls(const char *dirname);
int file_fat_detectfs(void);
C code APIs (added by Rockbox FAT support):
long file_fat_write(const char *path, void *buf, unsigned long maxsize);
int file_fat_rm(const char *path);
int file_fat_rmdir(const char *path);
int file_fat_mkdir(const char *path);
int file_fat_cd(const char *path);
int file_fat_pwd(void);
int file_fat_mv(const char *oldpath, const char *newpath);
unsigned int rockbox_fat_free(unsigned long size_kbyte);
unsigned int rockbox_fat_size(void);
Use "help fat" from u-boot console to see available commands.
ST-Ericsson ID: WP264488
Change-Id: I9afc29ecb80f9152bd8534bbf11e47e54cfad796
Signed-off-by: Michael Brandt <michael.brandt@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/3009
|
|
This code contains some non-ascii characters in comment lines and code.
Most editors do not display those characters properly and editing those
files results always in diffs at these places which are usually not required
to be changed at all. This is error prone.
So, remove those weird characters and replace them by normal C-style
equivalents for which the proper defines were already in the header.
Signed-off-by: Remy Bohmer <linux@bohmer.net>
|
|
This commit gets rid of a huge amount of silly white-space issues.
Especially, all sequences of SPACEs followed by TAB characters get
removed (unless they appear in print statements).
Also remove all embedded "vim:" and "vi:" statements which hide
indentation problems.
Signed-off-by: Wolfgang Denk <wd@denx.de>
|
|
This fixes the cluster size tests in the FAT32 file system.
The current implementation of VFAT support doesn't work if the
referred cluster has an offset > 16bit representation, causing
"fatload" and "fatls" commands etc. to fail.
Signed-off-by: michael trimarchi <trimarchi@gandalf.sssup.it>
|
|
Patch by Joachim Jaeger, 18 Nov 2005
|
|
sticks (including FAT / VFAT filesystem support)
* Add SL811 Host Controller Interface driver for USB
* Add CFG_I2C_EEPROM_ADDR_OVERFLOW desription to README
* Patch by Pantelis Antoniou, 19 Apr 2004:
Allow to use shell style syntax (i. e. ${var} ) with standard parser.
Minor patches for Intracom boards.
* Patch by Christian Pell, 19 Apr 2004:
cleanup support for CF/IDE on PCMCIA for PXA25X
|
|
Add support for Picture Elements JSE board
* Patch by Christian Pell, 01 Apr 2004:
Add CompactFlash support for PXA systems.
|
|
Add support for NET+50 CPU and ModNET50 board
* Patch by Sam Song, 10 Feb 2004:
Fix typos in cfi_flash.c
* Patch by Leon Kukovec, 10 Feb 2004
Fixed long dir entry slot id calculation in get_vfatname
* Patch by Robin Gilks, 10 Feb 2004:
add "itest" command (operators: -eq, -ne, -lt, -gt, -le, -ge, ==,
!=, <>, <, >, <=, >=)
|
|
- Changed the incorrect FAT12BUFSIZE
- data_begin in fsdata can be negative. Changed it to be short.
* Code cleanup
|
|
- add a return value for the fpga command
- add ide_preinit() function called in ide_init if CONFIG_IDE_PREINIT
is defined. If ide_preinit fails, ide_init is aborted.
- fix an endianess problem in fat.h
|
|
add FAT support for IDE, SCSI and USB
* Patches by Gleb Natapov, 2 Sep 2003:
- cleanup of POST code for unsupported architectures
- MPC824x locks way0 of data cache for use as initial RAM;
this patch unlocks it after relocation to RAM and invalidates
the locked entries.
* Patch by Gleb Natapov, 30 Aug 2003:
new I2C driver for mpc107 bridge. Now works from flash.
* Patch by Dave Ellis, 11 Aug 2003:
- JFFS2: fix typo in common/cmd_jffs2.c
- JFFS2: fix CFG_JFFS2_SORT_FRAGMENTS option
- JFFS2: remove node version 0 warning
- JFFS2: accept JFFS2 PADDING nodes
- SXNI855T: add AM29LV800 support
- SXNI855T: move environment from EEPROM to flash
- SXNI855T: boot from JFFS2 in NOR or NAND flash
* Patch by Bill Hargen, 11 Aug 2003:
fixes for I2C on MPC8240
- fix i2c_write routine
- fix iprobe command
- eliminates use of global variables, plus dead code, cleanup.
|
|
* Patches by Kyle Harris, 13 Mar 2003:
- Add FAT partition support
- Add command support for FAT
- Add command support for MMC
----
- Add Intel PXA support for video
- Add Intel PXA support for MMC
----
- Enable MMC and FAT for lubbock board
- Other misc changes for lubbock board
|
