| Age | Commit message (Collapse) | Author |
|---|
|
Right now we have duplicated code for when the option is the last in the
list or not. Put that code in a common function.
Interestingly it appears that both sides haven't been kept in sync and
that EOT and ACCWRCTRL had limitations on where they had to be in the
option list. It's fixed now!
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
|
|
Rather than user a full instruction for that. Also use
set_instruction_predicate() for a case that coud not be done like that
before the refactoring (because everyone now uses the same instruction
structure).
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
|
|
Now that all instructions (relocatable or not) are struct
brw_program_instructions, this means we can move the relocation specific
information out the "relocatable instruction" structure. This will allow
us to share the relocation information between different types of
instructions.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
|
|
Time to finally unify all instructions on the same structure.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
|
|
This will be less typing for the refactoring to come (which is use
struct brw_program_instruction in gram.y for the type of all the
instructions).
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
|
|
Everything is now aligned to be able to use brw_set_src1() in the
opcode generation, so use it.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
|
|
The assembler allows people to do that and that's something available
since Crestline.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
|
|
A small typo in the condition.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
|
|
Not everything has to be exported out the compilation unit. Do a small
cleanup pass.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
|
|
This way we ensure to have a single place where these are handled. The
immediate benefit is that now line numbers are always printed out, which
is quite handy.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
|
|
Unfortunately, it's all a walk in the park. Both, internal code in the
assembler and external shaders (libva) generate registers that trigger
assertions in brw_eu_emit.c's brw_validate().
To fix all that I took the option to be able to emit warning with the -W
flag but still make the assembler generate the same opcodes.
We can fix all this, but it requires validation, something that I cannot
do right now.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
|
|
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
|
|
Another check (that we hit if we try to use brw_set_src0()). Again,
protect it with the -W option.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
|
|
The list of region restrictions in bspec do say that we can't have:
width == 1 && hstrize != 0
We do have plenty of assembly code that don't respect that behaviour. So
let's hide the warning under a -W flag (for now) while we fix things.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
|
|
Now that we have locations, we can write error() and warn() functions
giving more information about where it's going wrong.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
|
|
Let's generate location information about the tokens we are parsing.
This can be used to give accurate location when reporting errors and
warnings.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
|
|
There's no real need to warn when the same register is declared twice.
Currently the libva driver does do that and this warning makes other
errors really hide in a sea of warnings.
Redefining a register with different parameters is a real error though,
so we should not allow that and error out in that case.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
|
|
Another step in pushing the parsing in struct brw_reg.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
|
|
Of course the assertion is there to make sure GRF and MRF have a reg.nr
< 128. To exclude ARF registers, reg.file has be checked, not reg.type
(channel type). Most likely a typo never caught.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
|
|
See the IVB PRM, vol4 part3 5.2.3.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
|
|
The goal is to use brw_set_src[01](), so let's start by validating the
register we have before generating the opcode.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
|
|
A few notes:
I needed to introduce a brw context and compile structs. These are only
used to get which generation we are compiling code for, but eventually
we can use more of the infrastructure.
brw_set_dest() uses the destination register width to program the
instruction execution size.
The assembler can either take subnr in bytes or in number of elements,
so we need a resolve step when setting a brw_reg.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
|
|
The goal is to use brw_set_dest(), so let's start by validating the
register we have before generating the opcode.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
|
|
Last refactoring step in transition to struct brw_reg.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
|
|
swizzle_set can be derived from the value of swizzle itself, no need for
that field.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
|
|
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
|
|
One more step on the road to replacing all register-like structures by
struct brw_reg.
Two things in this commit are worth noting:
* As we are using more and more brw_reg, a lot of the field-by-field
assignments can be replaced by 1 assignment which results is a
reduction of code
* As the destination horizontal stride is now stored on 2 bits in
brw_reg, it's not possible to defer the handling of DEFAULT_DSTREGION
(aka (int)-1) when setting the destination operand. It has to be done
when parsing the region and resolve_dst_region() is a helper for that
task.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
|
|
They are all struct brw_reg registers now.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
|
|
More code simplification can be layered on top of that (by using some
brw_* helpers to create registers), that'd be for another commit.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
|
|
More code simplification can be layered on top of that (by using some
brw_* helpers to create registers), that'd be for another commit.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
|
|
It's time to start converting the emission code in gram.y to use libbrw
infrastructure. Let's start with using brw_reg for declared register.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
|
|
and make then static.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
|
|
Adding something there will break the library, so we might as check for
it.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
|
|
Until now, the assembler had relocation-related fields added to struct
brw_instruction. This changes the size of the structure and break code
assuming the opcode structure is really 16 bytes, for instance the
emission code in brw_eu_emit.c.
With this commit, we build on the infrastructure that slowly emerged in
the few previous commits to add a relocatable instruction with the
needed fields.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
|
|
The output of the parsing is a list of struct brw_program_instruction.
These instructions can be either GEN instructions aka struct
brw_instruction or labels. To make this more explicit we now have a type
to test to determine which instruction we are dealing with.
This will also allow to to pull the relocation bits into struct
brw_program_instruction instead of having them in the structure
representing the opcodes.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
|
|
Factoring out the code from the grammar will allow us to switch to
using brw_compile in a cleaner way.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
|
|
No need to use a brw_program_instruction there as a brw_instruction is
what you really dump anyway, espcially when the plan is to use
brw_compile from Mesa sooner rather than later.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
|
|
This function can only be called to resolve subreg_nr in direct mode
(there is an other function for the indirect case) and it makes no sense
to call it with an immediate operand.
Express those facts with asserts and simplify the logic.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
|
|
Another step towards using struct brw_reg for source and destination
operands.
Instead of having a separate field to store the sub register number of
the address register in indirect access mode, we can reuse the subreg_nr
field that was only used for direct access so far.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
|
|
writemask_set gets in the way of switching to using struct brw_reg and
it's possible to derive it from the writemask value.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
|
|
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
|
|
Finally importing the meaty brw_eu_emit.c code that emit instructions.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
|
|
Another step the road of importing Mesa's emission code.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
|
|
To be able to import brw_eu.c and brw_eu_emit.c later on. This could be
used to get the assembler generate compact instructions at some point.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
|
|
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
|
|
With the brw_* files imported from mesa.
There are still a few things in that library that needs gen4asm.h, for
instance the GLuint and GLint types. The hope is that eventually libbrw
can be split out in its own directory and shared.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
|
|
A lot of the mesa code use struct brw_context to get the GPU generation
and various information. Let's stub this structure and initialize it
ourselves to be able to resuse mesa's code untouched.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
|
|
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
|
|
This also add a new brw_compat.h that should help maintaining the
diff between mesa's version and our as small as possible.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
|
|
From Mesa. This imports a bit more the of brw_eu* infrastructure (which
is going towards the right direction!) from mesa and the update is quite
a significant improvement over what we had.
I also verified that the changes that were done on the assembler old
version of brw_disasm.c were already supported by the Mesa version, and
indeed they were.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
|
