Merge tag 'arm-adrl-replacement-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ardb/linux into devel-stable

Tidy up open coded relative references in asm

Use the newly introduced adr_l/ldr_l/str_l/mov_l assembler macros to
replace open coded VA-to-PA arithmetic in various places in the code. This
avoids the use of literals on v7+ CPUs, reduces the footprint of the code
in most cases, and generally makes the code easier to follow.

Series was posted here, and reviewed by Nicolas Pitre:
https://lore.kernel.org/linux-arm-kernel/20200914095706.3985-1-ardb@kernel.org/

7 files changed, 44 insertions, 111 deletions

diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 2e04ec5b5446..9905fb7560df 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -468,15 +468,10 @@ dtb_check_done:
 
 		/*
 		 * Compute the address of the hyp vectors after relocation.
-		 * This requires some arithmetic since we cannot directly
-		 * reference __hyp_stub_vectors in a PC-relative way.
 		 * Call __hyp_set_vectors with the new address so that we
 		 * can HVC again after the copy.
 		 */
-0:		adr	r0, 0b
-		movw	r1, #:lower16:__hyp_stub_vectors - 0b
-		movt	r1, #:upper16:__hyp_stub_vectors - 0b
-		add	r0, r0, r1
+		adr_l	r0, __hyp_stub_vectors
 		sub	r0, r0, r5
 		add	r0, r0, r10
 		bl	__hyp_set_vectors
@@ -627,17 +622,11 @@ not_relocated:	mov	r0, #0
 		cmp	r0, #HYP_MODE		@ if not booted in HYP mode...
 		bne	__enter_kernel		@ boot kernel directly
 
-		adr	r12, .L__hyp_reentry_vectors_offset
-		ldr	r0, [r12]
-		add	r0, r0, r12
-
+		adr_l	r0, __hyp_reentry_vectors
 		bl	__hyp_set_vectors
 		__HVC(0)			@ otherwise bounce to hyp mode
 
 		b	.			@ should never be reached
-
-		.align	2
-.L__hyp_reentry_vectors_offset:	.long	__hyp_reentry_vectors - .
 #else
 		b	__enter_kernel
 #endif
@@ -1440,8 +1429,7 @@ ENTRY(efi_enter_kernel)
 		mov	r4, r0			@ preserve image base
 		mov	r8, r1			@ preserve DT pointer
 
- ARM(		adrl	r0, call_cache_fn	)
- THUMB(		adr	r0, call_cache_fn	)
+		adr_l	r0, call_cache_fn
 		adr	r1, 0f			@ clean the region of code we
 		bl	cache_clean_flush	@ may run with the MMU off
 
diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
index 72627c5fb3b2..6ed30421f697 100644
--- a/arch/arm/include/asm/assembler.h
+++ b/arch/arm/include/asm/assembler.h
@@ -259,7 +259,7 @@
  */
 #define ALT_UP(instr...)					\
 	.pushsection ".alt.smp.init", "a"			;\
-	.long	9998b						;\
+	.long	9998b - .					;\
 9997:	instr							;\
 	.if . - 9997b == 2					;\
 		nop						;\
@@ -270,7 +270,7 @@
 	.popsection
 #define ALT_UP_B(label)					\
 	.pushsection ".alt.smp.init", "a"			;\
-	.long	9998b						;\
+	.long	9998b - .					;\
 	W(b)	. + (label - 9998b)					;\
 	.popsection
 #else
diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h
index b9241051e5cb..9e6b97286307 100644
--- a/arch/arm/include/asm/processor.h
+++ b/arch/arm/include/asm/processor.h
@@ -96,7 +96,7 @@ unsigned long get_wchan(struct task_struct *p);
 #define __ALT_SMP_ASM(smp, up)						\
 	"9998:	" smp "\n"						\
 	"	.pushsection \".alt.smp.init\", \"a\"\n"		\
-	"	.long	9998b\n"					\
+	"	.long	9998b - .\n"					\
 	"	" up "\n"						\
 	"	.popsection\n"
 #else
diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S
index 4a3982812a40..9a5ab6c19568 100644
--- a/arch/arm/kernel/head-common.S
+++ b/arch/arm/kernel/head-common.S
@@ -170,11 +170,12 @@ ENDPROC(lookup_processor_type)
  *	r9 = cpuid (preserved)
  */
 __lookup_processor_type:
-	adr	r3, __lookup_processor_type_data
-	ldmia	r3, {r4 - r6}
-	sub	r3, r3, r4			@ get offset between virt&phys
-	add	r5, r5, r3			@ convert virt addresses to
-	add	r6, r6, r3			@ physical address space
+	/*
+	 * Look in <asm/procinfo.h> for information about the __proc_info
+	 * structure.
+	 */
+	adr_l	r5, __proc_info_begin
+	adr_l	r6, __proc_info_end
 1:	ldmia	r5, {r3, r4}			@ value, mask
 	and	r4, r4, r9			@ mask wanted bits
 	teq	r3, r4
@@ -186,17 +187,6 @@ __lookup_processor_type:
 2:	ret	lr
 ENDPROC(__lookup_processor_type)
 
-/*
- * Look in <asm/procinfo.h> for information about the __proc_info structure.
- */
-	.align	2
-	.type	__lookup_processor_type_data, %object
-__lookup_processor_type_data:
-	.long	.
-	.long	__proc_info_begin
-	.long	__proc_info_end
-	.size	__lookup_processor_type_data, . - __lookup_processor_type_data
-
 __error_lpae:
 #ifdef CONFIG_DEBUG_LL
 	adr	r0, str_lpae
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 7e3f36809011..ae0b08b47f52 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -103,10 +103,8 @@ ENTRY(stext)
 #endif
 
 #ifndef CONFIG_XIP_KERNEL
-	adr	r3, 2f
-	ldmia	r3, {r4, r8}
-	sub	r4, r3, r4			@ (PHYS_OFFSET - PAGE_OFFSET)
-	add	r8, r8, r4			@ PHYS_OFFSET
+	adr_l	r8, _text			@ __pa(_text)
+	sub	r8, r8, #TEXT_OFFSET		@ PHYS_OFFSET
 #else
 	ldr	r8, =PLAT_PHYS_OFFSET		@ always constant in this case
 #endif
@@ -158,10 +156,6 @@ ENTRY(stext)
 1:	b	__enable_mmu
 ENDPROC(stext)
 	.ltorg
-#ifndef CONFIG_XIP_KERNEL
-2:	.long	.
-	.long	PAGE_OFFSET
-#endif
 
 /*
  * Setup the initial page tables.  We only setup the barest
@@ -224,11 +218,8 @@ __create_page_tables:
 	 * Create identity mapping to cater for __enable_mmu.
 	 * This identity mapping will be removed by paging_init().
 	 */
-	adr	r0, __turn_mmu_on_loc
-	ldmia	r0, {r3, r5, r6}
-	sub	r0, r0, r3			@ virt->phys offset
-	add	r5, r5, r0			@ phys __turn_mmu_on
-	add	r6, r6, r0			@ phys __turn_mmu_on_end
+	adr_l	r5, __turn_mmu_on		@ _pa(__turn_mmu_on)
+	adr_l	r6, __turn_mmu_on_end		@ _pa(__turn_mmu_on_end)
 	mov	r5, r5, lsr #SECTION_SHIFT
 	mov	r6, r6, lsr #SECTION_SHIFT
 
@@ -351,11 +342,6 @@ __create_page_tables:
 	ret	lr
 ENDPROC(__create_page_tables)
 	.ltorg
-	.align
-__turn_mmu_on_loc:
-	.long	.
-	.long	__turn_mmu_on
-	.long	__turn_mmu_on_end
 
 #if defined(CONFIG_SMP)
 	.text
@@ -391,10 +377,8 @@ ENTRY(secondary_startup)
 	/*
 	 * Use the page tables supplied from  __cpu_up.
 	 */
-	adr	r4, __secondary_data
-	ldmia	r4, {r5, r7, r12}		@ address to jump to after
-	sub	lr, r4, r5			@ mmu has been enabled
-	add	r3, r7, lr
+	adr_l	r3, secondary_data
+	mov_l	r12, __secondary_switched
 	ldrd	r4, r5, [r3, #0]		@ get secondary_data.pgdir
 ARM_BE8(eor	r4, r4, r5)			@ Swap r5 and r4 in BE:
 ARM_BE8(eor	r5, r4, r5)			@ it can be done in 3 steps
@@ -409,22 +393,13 @@ ARM_BE8(eor	r4, r4, r5)			@ without using a temp reg.
 ENDPROC(secondary_startup)
 ENDPROC(secondary_startup_arm)
 
-	/*
-	 * r6  = &secondary_data
-	 */
 ENTRY(__secondary_switched)
-	ldr	sp, [r7, #12]			@ get secondary_data.stack
+	ldr_l	r7, secondary_data + 12		@ get secondary_data.stack
+	mov	sp, r7
 	mov	fp, #0
 	b	secondary_start_kernel
 ENDPROC(__secondary_switched)
 
-	.align
-
-	.type	__secondary_data, %object
-__secondary_data:
-	.long	.
-	.long	secondary_data
-	.long	__secondary_switched
 #endif /* defined(CONFIG_SMP) */
 
 
@@ -539,19 +514,11 @@ ARM_BE8(rev	r0, r0)			@ byteswap if big endian
 	retne	lr
 
 __fixup_smp_on_up:
-	adr	r0, 1f
-	ldmia	r0, {r3 - r5}
-	sub	r3, r0, r3
-	add	r4, r4, r3
-	add	r5, r5, r3
+	adr_l	r4, __smpalt_begin
+	adr_l	r5, __smpalt_end
 	b	__do_fixup_smp_on_up
 ENDPROC(__fixup_smp)
 
-	.align
-1:	.word	.
-	.word	__smpalt_begin
-	.word	__smpalt_end
-
 	.pushsection .data
 	.align	2
 	.globl	smp_on_up
@@ -565,14 +532,15 @@ smp_on_up:
 __do_fixup_smp_on_up:
 	cmp	r4, r5
 	reths	lr
-	ldmia	r4!, {r0, r6}
- ARM(	str	r6, [r0, r3]	)
- THUMB(	add	r0, r0, r3	)
+	ldmia	r4, {r0, r6}
+ ARM(	str	r6, [r0, r4]	)
+ THUMB(	add	r0, r0, r4	)
+	add	r4, r4, #8
 #ifdef __ARMEB__
  THUMB(	mov	r6, r6, ror #16	)	@ Convert word order for big-endian.
 #endif
  THUMB(	strh	r6, [r0], #2	)	@ For Thumb-2, store as two halfwords
- THUMB(	mov	r6, r6, lsr #16	)	@ to be robust against misaligned r3.
+ THUMB(	mov	r6, r6, lsr #16	)	@ to be robust against misaligned r0.
  THUMB(	strh	r6, [r0]	)
 	b	__do_fixup_smp_on_up
 ENDPROC(__do_fixup_smp_on_up)
@@ -581,7 +549,6 @@ ENTRY(fixup_smp)
 	stmfd	sp!, {r4 - r6, lr}
 	mov	r4, r0
 	add	r5, r0, r1
-	mov	r3, #0
 	bl	__do_fixup_smp_on_up
 	ldmfd	sp!, {r4 - r6, pc}
 ENDPROC(fixup_smp)
diff --git a/arch/arm/kernel/hyp-stub.S b/arch/arm/kernel/hyp-stub.S
index 26d8e03b1dd3..103d0bdb2b7e 100644
--- a/arch/arm/kernel/hyp-stub.S
+++ b/arch/arm/kernel/hyp-stub.S
@@ -24,41 +24,38 @@ ENTRY(__boot_cpu_mode)
 .text
 
 	/*
-	 * Save the primary CPU boot mode. Requires 3 scratch registers.
+	 * Save the primary CPU boot mode. Requires 2 scratch registers.
 	 */
-	.macro	store_primary_cpu_mode	reg1, reg2, reg3
+	.macro	store_primary_cpu_mode	reg1, reg2
 	mrs	\reg1, cpsr
 	and	\reg1, \reg1, #MODE_MASK
-	adr	\reg2, .L__boot_cpu_mode_offset
-	ldr	\reg3, [\reg2]
-	str	\reg1, [\reg2, \reg3]
+	str_l	\reg1, __boot_cpu_mode, \reg2
 	.endm
 
 	/*
 	 * Compare the current mode with the one saved on the primary CPU.
 	 * If they don't match, record that fact. The Z bit indicates
 	 * if there's a match or not.
-	 * Requires 3 additionnal scratch registers.
+	 * Requires 2 additional scratch registers.
 	 */
-	.macro	compare_cpu_mode_with_primary mode, reg1, reg2, reg3
-	adr	\reg2, .L__boot_cpu_mode_offset
-	ldr	\reg3, [\reg2]
-	ldr	\reg1, [\reg2, \reg3]
+	.macro	compare_cpu_mode_with_primary mode, reg1, reg2
+	adr_l	\reg2, __boot_cpu_mode
+	ldr	\reg1, [\reg2]
 	cmp	\mode, \reg1		@ matches primary CPU boot mode?
 	orrne	\reg1, \reg1, #BOOT_CPU_MODE_MISMATCH
-	strne	\reg1, [\reg2, \reg3]	@ record what happened and give up
+	strne	\reg1, [\reg2]		@ record what happened and give up
 	.endm
 
 #else	/* ZIMAGE */
 
-	.macro	store_primary_cpu_mode	reg1:req, reg2:req, reg3:req
+	.macro	store_primary_cpu_mode	reg1:req, reg2:req
 	.endm
 
 /*
  * The zImage loader only runs on one CPU, so we don't bother with mult-CPU
  * consistency checking:
  */
-	.macro	compare_cpu_mode_with_primary mode, reg1, reg2, reg3
+	.macro	compare_cpu_mode_with_primary mode, reg1, reg2
 	cmp	\mode, \mode
 	.endm
 
@@ -73,7 +70,7 @@ ENTRY(__boot_cpu_mode)
  */
 @ Call this from the primary CPU
 ENTRY(__hyp_stub_install)
-	store_primary_cpu_mode	r4, r5, r6
+	store_primary_cpu_mode	r4, r5
 ENDPROC(__hyp_stub_install)
 
 	@ fall through...
@@ -87,7 +84,7 @@ ENTRY(__hyp_stub_install_secondary)
 	 * If the secondary has booted with a different mode, give up
 	 * immediately.
 	 */
-	compare_cpu_mode_with_primary	r4, r5, r6, r7
+	compare_cpu_mode_with_primary	r4, r5, r6
 	retne	lr
 
 	/*
diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S
index 5dc8b80bb693..43077e11dafd 100644
--- a/arch/arm/kernel/sleep.S
+++ b/arch/arm/kernel/sleep.S
@@ -72,8 +72,9 @@ ENTRY(__cpu_suspend)
 	ldr	r3, =sleep_save_sp
 	stmfd	sp!, {r0, r1}		@ save suspend func arg and pointer
 	ldr	r3, [r3, #SLEEP_SAVE_SP_VIRT]
-	ALT_SMP(ldr r0, =mpidr_hash)
+	ALT_SMP(W(nop))			@ don't use adr_l inside ALT_SMP()
 	ALT_UP_B(1f)
+	adr_l	r0, mpidr_hash
 	/* This ldmia relies on the memory layout of the mpidr_hash struct */
 	ldmia	r0, {r1, r6-r8}	@ r1 = mpidr mask (r6,r7,r8) = l[0,1,2] shifts
 	compute_mpidr_hash	r0, r6, r7, r8, r2, r1
@@ -147,9 +148,8 @@ no_hyp:
 	mov	r1, #0
 	ALT_SMP(mrc p15, 0, r0, c0, c0, 5)
 	ALT_UP_B(1f)
-	adr	r2, mpidr_hash_ptr
-	ldr	r3, [r2]
-	add	r2, r2, r3		@ r2 = struct mpidr_hash phys address
+	adr_l	r2, mpidr_hash		@ r2 = struct mpidr_hash phys address
+
 	/*
 	 * This ldmia relies on the memory layout of the mpidr_hash
 	 * struct mpidr_hash.
@@ -157,10 +157,7 @@ no_hyp:
 	ldmia	r2, { r3-r6 }	@ r3 = mpidr mask (r4,r5,r6) = l[0,1,2] shifts
 	compute_mpidr_hash	r1, r4, r5, r6, r0, r3
 1:
-	adr	r0, _sleep_save_sp
-	ldr	r2, [r0]
-	add	r0, r0, r2
-	ldr	r0, [r0, #SLEEP_SAVE_SP_PHYS]
+	ldr_l	r0, sleep_save_sp + SLEEP_SAVE_SP_PHYS
 	ldr	r0, [r0, r1, lsl #2]
 
 	@ load phys pgd, stack, resume fn
@@ -177,12 +174,6 @@ ENDPROC(cpu_resume_arm)
 ENDPROC(cpu_resume_no_hyp)
 #endif
 
-	.align 2
-_sleep_save_sp:
-	.long	sleep_save_sp - .
-mpidr_hash_ptr:
-	.long	mpidr_hash - .			@ mpidr_hash struct offset
-
 	.data
 	.align	2
 	.type	sleep_save_sp, #object