summaryrefslogtreecommitdiff
path: root/Documentation/ABI
diff options
context:
space:
mode:
authorGreg Kroah-Hartman <gregkh@linuxfoundation.org>2016-04-26 15:07:23 -0700
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2016-04-26 15:07:23 -0700
commit5a45e01d414636e144ab28b62089d0eb97f43ec2 (patch)
tree814ddaaceba0e759988c795a42728e91819af2c1 /Documentation/ABI
parent4145ba76b1f7f3296cc673c299084145e1267029 (diff)
parentfbced0e9465152d628ece5fd0d11de4e7a1f5ce5 (diff)
Merge tag 'iio-for-4.7b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-testing
Jonathan writes: 2nd set of new device support, features and cleanup for IIO in the 4.7 cycle. Bit of a bumper set for new drivers but plenty of other stuff here as well! New device support * ad5592R ADC/DAC - new driver supporting ad5592r and ad5593r combined ADC/DAC and gpio chips. * Aosong am2315 relative humidity - new driver with triggered buffer support in follow up patch. * bmi160 imu - new driver * bmp280 - bmp180 support - note there is support in the misc/bmp085 driver. Intent is to remove that driver long term. * invensense mpu6050 - cleanup leading to explicit support of mpu9150 with a good few cleanups along the way. * Hope RF hp03 pressure and temperature sensor. - new driver * maxim DS1803 potentiometer - new driver * maxim max44000 light and proximity sensor - new driver built in a series of steps to support pretty much everything. * ROHM BH1780 light sensor - new driver. There is an existing driver in misc that this is pretty much intended to replace. The discussion on whether to support the non standard interface of that driver is some way is continuing. * st-gyro - lsm9ds0-gyro. The accel/magn side of this will take a while longer as extensions to the st library are needed for cases where two types of sensor share a single i2c address. * ti-adc081c - support the adc101c and adc121c * Vishay VEML6070 UV sensor - new driver. New features * core - devm_ APIs for channel_get and channel_get_all. The first user of these is the generic ADC based thermal driver. As it is going through the thermal tree these will be picked up as a patch to that next cycle as that is how the author preferred to do it. - mounting matrix support. This new core support allows devices to provide to userspace (typically from the device tree) allowing compensation for how the sensor is mounted on the device. First examples are on UAVs but it has a more mundane use on typical phone where the chip may be on the front or the back of the circuit board and soldered at any angle. Includes support for this ABI in ak8975 (which has an older interface, now deprecated) and mpu6050. * tools - add a -a option to enable all available channels in generic_buffer sample. Makes it somewhat easier to use. * adis library and drivers - support manual self test flag clearing. This has technically been broken for a very long time - result is an offset on readings as the applied field is on all the time. * ak8975 - triggered buffer support * bmc150 - spi support (including splitting the driver into core and i2c parts) * bmp280 - oversampling support. * dht11 - improved logging - useful to debug timing issues on this quirky device. * st-sensors - read each channel invidivually as not all support the optimization of reading in bulk. This is technically a fix, but will need to be backported if desired. - support open drain and shared interrupts. * ti-adc081c - triggered buffer support. Cleanups * inkern - white space fix. * ad7606 - use the iio_device_claim_direct_mode call rather than open coding equiv. * ad799x - white space fix. * ad9523 - unsigned -> unsigned int * apds9660 - brace location tidying up. - silence an uninitialized variable warning. * ak8975 - else and brace on same line fix. * at91_adc - white space fixes. * bmc150 - use regmap stored copy of the device pointer rather than having an additional copy. * bmg160 - use regmap stored copy of the device pointer rather than having an additional copy. * hid-sensors - white space fixes. * mcp3422 - white space fix. * mma7455 - use regmap to retrieve the device struct rather than carrying another copy in the private data. * ms_sensors - white space fix. * mxs-lradc - move current bindings out of staging - some will be shortly deprecated but the reality is that we have device trees out there using them so they will need to be supported for some time. They accidentally got left behind when the driver graduated from staging. - white space cleanup. - set INPUT_PROP_DIRECT. - move ts config into a better function. - move the STMP reset out of the ADC init. * vf610_adc - case label indenting fix.
Diffstat (limited to 'Documentation/ABI')
-rw-r--r--Documentation/ABI/testing/sysfs-bus-iio53
1 files changed, 53 insertions, 0 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
index f155eff910f9..df44998e7506 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio
+++ b/Documentation/ABI/testing/sysfs-bus-iio
@@ -1512,3 +1512,56 @@ Contact: linux-iio@vger.kernel.org
Description:
Raw (unscaled no offset etc.) pH reading of a substance as a negative
base-10 logarithm of hydrodium ions in a litre of water.
+
+What: /sys/bus/iio/devices/iio:deviceX/mount_matrix
+What: /sys/bus/iio/devices/iio:deviceX/in_mount_matrix
+What: /sys/bus/iio/devices/iio:deviceX/out_mount_matrix
+What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_mount_matrix
+What: /sys/bus/iio/devices/iio:deviceX/in_accel_mount_matrix
+KernelVersion: 4.6
+Contact: linux-iio@vger.kernel.org
+Description:
+ Mounting matrix for IIO sensors. This is a rotation matrix which
+ informs userspace about sensor chip's placement relative to the
+ main hardware it is mounted on.
+ Main hardware placement is defined according to the local
+ reference frame related to the physical quantity the sensor
+ measures.
+ Given that the rotation matrix is defined in a board specific
+ way (platform data and / or device-tree), the main hardware
+ reference frame definition is left to the implementor's choice
+ (see below for a magnetometer example).
+ Applications should apply this rotation matrix to samples so
+ that when main hardware reference frame is aligned onto local
+ reference frame, then sensor chip reference frame is also
+ perfectly aligned with it.
+ Matrix is a 3x3 unitary matrix and typically looks like
+ [0, 1, 0; 1, 0, 0; 0, 0, -1]. Identity matrix
+ [1, 0, 0; 0, 1, 0; 0, 0, 1] means sensor chip and main hardware
+ are perfectly aligned with each other.
+
+ For example, a mounting matrix for a magnetometer sensor informs
+ userspace about sensor chip's ORIENTATION relative to the main
+ hardware.
+ More specifically, main hardware orientation is defined with
+ respect to the LOCAL EARTH GEOMAGNETIC REFERENCE FRAME where :
+ * Y is in the ground plane and positive towards magnetic North ;
+ * X is in the ground plane, perpendicular to the North axis and
+ positive towards the East ;
+ * Z is perpendicular to the ground plane and positive upwards.
+
+ An implementor might consider that for a hand-held device, a
+ 'natural' orientation would be 'front facing camera at the top'.
+ The main hardware reference frame could then be described as :
+ * Y is in the plane of the screen and is positive towards the
+ top of the screen ;
+ * X is in the plane of the screen, perpendicular to Y axis, and
+ positive towards the right hand side of the screen ;
+ * Z is perpendicular to the screen plane and positive out of the
+ screen.
+ Another example for a quadrotor UAV might be :
+ * Y is in the plane of the propellers and positive towards the
+ front-view camera;
+ * X is in the plane of the propellers, perpendicular to Y axis,
+ and positive towards the starboard side of the UAV ;
+ * Z is perpendicular to propellers plane and positive upwards.