Merge branch 'for-linus' into for-next

Merge back the latest HD-audio stuff for further development.

12 files changed, 76 insertions, 29 deletions

diff --git a/Documentation/IPMI.txt b/Documentation/IPMI.txt
index 653d5d739d7f..31d1d658827f 100644
--- a/Documentation/IPMI.txt
+++ b/Documentation/IPMI.txt
@@ -505,7 +505,10 @@ at module load time (for a module) with:
 
 The addresses are normal I2C addresses.  The adapter is the string
 name of the adapter, as shown in /sys/class/i2c-adapter/i2c-<n>/name.
-It is *NOT* i2c-<n> itself.
+It is *NOT* i2c-<n> itself.  Also, the comparison is done ignoring
+spaces, so if the name is "This is an I2C chip" you can say
+adapter_name=ThisisanI2cchip.  This is because it's hard to pass in
+spaces in kernel parameters.
 
 The debug flags are bit flags for each BMC found, they are:
 IPMI messages: 1, driver state: 2, timing: 4, I2C probe: 8
diff --git a/Documentation/acpi/enumeration.txt b/Documentation/acpi/enumeration.txt
index 750401f91341..15dfce708ebf 100644
--- a/Documentation/acpi/enumeration.txt
+++ b/Documentation/acpi/enumeration.txt
@@ -253,7 +253,7 @@ input driver:
 GPIO support
 ~~~~~~~~~~~~
 ACPI 5 introduced two new resources to describe GPIO connections: GpioIo
-and GpioInt. These resources are used be used to pass GPIO numbers used by
+and GpioInt. These resources can be used to pass GPIO numbers used by
 the device to the driver. ACPI 5.1 extended this with _DSD (Device
 Specific Data) which made it possible to name the GPIOs among other things.
 
diff --git a/Documentation/acpi/gpio-properties.txt b/Documentation/acpi/gpio-properties.txt
index ae36fcf86dc7..f35dad11f0de 100644
--- a/Documentation/acpi/gpio-properties.txt
+++ b/Documentation/acpi/gpio-properties.txt
@@ -1,9 +1,9 @@
 _DSD Device Properties Related to GPIO
 --------------------------------------
 
-With the release of ACPI 5.1 and the _DSD configuration objecte names
-can finally be given to GPIOs (and other things as well) returned by
-_CRS.  Previously, we were only able to use an integer index to find
+With the release of ACPI 5.1, the _DSD configuration object finally
+allows names to be given to GPIOs (and other things as well) returned
+by _CRS.  Previously, we were only able to use an integer index to find
 the corresponding GPIO, which is pretty error prone (it depends on
 the _CRS output ordering, for example).
 
diff --git a/Documentation/devicetree/bindings/arm/omap/l3-noc.txt b/Documentation/devicetree/bindings/arm/omap/l3-noc.txt
index 974624ea68f6..161448da959d 100644
--- a/Documentation/devicetree/bindings/arm/omap/l3-noc.txt
+++ b/Documentation/devicetree/bindings/arm/omap/l3-noc.txt
@@ -6,6 +6,7 @@ provided by Arteris.
 Required properties:
 - compatible : Should be "ti,omap3-l3-smx" for OMAP3 family
                Should be "ti,omap4-l3-noc" for OMAP4 family
+               Should be "ti,omap5-l3-noc" for OMAP5 family
 	       Should be "ti,dra7-l3-noc" for DRA7 family
                Should be "ti,am4372-l3-noc" for AM43 family
 - reg:	Contains L3 register address range for each noc domain.
diff --git a/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt b/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt
index a4873e5e3e36..e30e184f50c7 100644
--- a/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt
+++ b/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt
@@ -38,7 +38,7 @@ dma_apbx: dma-apbx@80024000 {
 		      80 81 68 69
 		      70 71 72 73
 		      74 75 76 77>;
-	interrupt-names = "auart4-rx", "aurat4-tx", "spdif-tx", "empty",
+	interrupt-names = "auart4-rx", "auart4-tx", "spdif-tx", "empty",
 			  "saif0", "saif1", "i2c0", "i2c1",
 			  "auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx",
 			  "auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx";
diff --git a/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt b/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt
new file mode 100644
index 000000000000..be789685a1c2
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt
@@ -0,0 +1,30 @@
+Abracon ABX80X I2C ultra low power RTC/Alarm chip
+
+The Abracon ABX80X family consist of the ab0801, ab0803, ab0804, ab0805, ab1801,
+ab1803, ab1804 and ab1805. The ab0805 is the superset of ab080x and the ab1805
+is the superset of ab180x.
+
+Required properties:
+
+ - "compatible": should one of:
+        "abracon,abx80x"
+        "abracon,ab0801"
+        "abracon,ab0803"
+        "abracon,ab0804"
+        "abracon,ab0805"
+        "abracon,ab1801"
+        "abracon,ab1803"
+        "abracon,ab1804"
+        "abracon,ab1805"
+	Using "abracon,abx80x" will enable chip autodetection.
+ - "reg": I2C bus address of the device
+
+Optional properties:
+
+The abx804 and abx805 have a trickle charger that is able to charge the
+connected battery or supercap. Both the following properties have to be defined
+and valid to enable charging:
+
+ - "abracon,tc-diode": should be "standard" (0.6V) or "schottky" (0.3V)
+ - "abracon,tc-resistor": should be <0>, <3>, <6> or <11>. 0 disables the output
+                          resistor, the other values are in ohm.
diff --git a/Documentation/kasan.txt b/Documentation/kasan.txt
index 092fc10961fe..4692241789b1 100644
--- a/Documentation/kasan.txt
+++ b/Documentation/kasan.txt
@@ -9,7 +9,9 @@ a fast and comprehensive solution for finding use-after-free and out-of-bounds
 bugs.
 
 KASan uses compile-time instrumentation for checking every memory access,
-therefore you will need a certain version of GCC > 4.9.2
+therefore you will need a gcc version of 4.9.2 or later. KASan could detect out
+of bounds accesses to stack or global variables, but only if gcc 5.0 or later was
+used to built the kernel.
 
 Currently KASan is supported only for x86_64 architecture and requires that the
 kernel be built with the SLUB allocator.
@@ -23,8 +25,8 @@ To enable KASAN configure kernel with:
 
 and choose between CONFIG_KASAN_OUTLINE and CONFIG_KASAN_INLINE. Outline/inline
 is compiler instrumentation types. The former produces smaller binary the
-latter is 1.1 - 2 times faster. Inline instrumentation requires GCC 5.0 or
-latter.
+latter is 1.1 - 2 times faster. Inline instrumentation requires a gcc version
+of 5.0 or later.
 
 Currently KASAN works only with the SLUB memory allocator.
 For better bug detection and nicer report, enable CONFIG_STACKTRACE and put
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index f6befa9855c1..61ab1628a057 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -3787,6 +3787,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 					READ_CAPACITY_16 command);
 				f = NO_REPORT_OPCODES (don't use report opcodes
 					command, uas only);
+				g = MAX_SECTORS_240 (don't transfer more than
+					240 sectors at a time, uas only);
 				h = CAPACITY_HEURISTICS (decrease the
 					reported device capacity by one
 					sector if the number is odd);
diff --git a/Documentation/module-signing.txt b/Documentation/module-signing.txt
index 09c2382ad055..c72702ec1ded 100644
--- a/Documentation/module-signing.txt
+++ b/Documentation/module-signing.txt
@@ -119,9 +119,9 @@ Most notably, in the x509.genkey file, the req_distinguished_name section
 should be altered from the default:
 
 	[ req_distinguished_name ]
-	O = Magrathea
-	CN = Glacier signing key
-	emailAddress = slartibartfast@magrathea.h2g2
+	#O = Unspecified company
+	CN = Build time autogenerated kernel key
+	#emailAddress = unspecified.user@unspecified.company
 
 The generated RSA key size can also be set with:
 
diff --git a/Documentation/networking/mpls-sysctl.txt b/Documentation/networking/mpls-sysctl.txt
index 639ddf0ece9b..9ed15f86c17c 100644
--- a/Documentation/networking/mpls-sysctl.txt
+++ b/Documentation/networking/mpls-sysctl.txt
@@ -18,3 +18,12 @@ platform_labels - INTEGER
 
 	Possible values: 0 - 1048575
 	Default: 0
+
+conf/<interface>/input - BOOL
+	Control whether packets can be input on this interface.
+
+	If disabled, packets will be discarded without further
+	processing.
+
+	0 - disabled (default)
+	not 0 - enabled
diff --git a/Documentation/networking/scaling.txt b/Documentation/networking/scaling.txt
index cbfac0949635..59f4db2a0c85 100644
--- a/Documentation/networking/scaling.txt
+++ b/Documentation/networking/scaling.txt
@@ -282,7 +282,7 @@ following is true:
 
 - The current CPU's queue head counter >= the recorded tail counter
   value in rps_dev_flow[i]
-- The current CPU is unset (equal to RPS_NO_CPU)
+- The current CPU is unset (>= nr_cpu_ids)
 - The current CPU is offline
 
 After this check, the packet is sent to the (possibly updated) current
diff --git a/Documentation/powerpc/transactional_memory.txt b/Documentation/powerpc/transactional_memory.txt
index ba0a2a4a54ba..ded69794a5c0 100644
--- a/Documentation/powerpc/transactional_memory.txt
+++ b/Documentation/powerpc/transactional_memory.txt
@@ -74,23 +74,22 @@ Causes of transaction aborts
 Syscalls
 ========
 
-Syscalls made from within an active transaction will not be performed and the
-transaction will be doomed by the kernel with the failure code TM_CAUSE_SYSCALL
-| TM_CAUSE_PERSISTENT.
+Performing syscalls from within transaction is not recommended, and can lead
+to unpredictable results.
 
-Syscalls made from within a suspended transaction are performed as normal and
-the transaction is not explicitly doomed by the kernel.  However, what the
-kernel does to perform the syscall may result in the transaction being doomed
-by the hardware.  The syscall is performed in suspended mode so any side
-effects will be persistent, independent of transaction success or failure.  No
-guarantees are provided by the kernel about which syscalls will affect
-transaction success.
+Syscalls do not by design abort transactions, but beware: The kernel code will
+not be running in transactional state.  The effect of syscalls will always
+remain visible, but depending on the call they may abort your transaction as a
+side-effect, read soon-to-be-aborted transactional data that should not remain
+invisible, etc.  If you constantly retry a transaction that constantly aborts
+itself by calling a syscall, you'll have a livelock & make no progress.
 
-Care must be taken when relying on syscalls to abort during active transactions
-if the calls are made via a library.  Libraries may cache values (which may
-give the appearance of success) or perform operations that cause transaction
-failure before entering the kernel (which may produce different failure codes).
-Examples are glibc's getpid() and lazy symbol resolution.
+Simple syscalls (e.g. sigprocmask()) "could" be OK.  Even things like write()
+from, say, printf() should be OK as long as the kernel does not access any
+memory that was accessed transactionally.
+
+Consider any syscalls that happen to work as debug-only -- not recommended for
+production use.  Best to queue them up till after the transaction is over.
 
 
 Signals
@@ -177,7 +176,8 @@ kernel aborted a transaction:
  TM_CAUSE_RESCHED       Thread was rescheduled.
  TM_CAUSE_TLBI          Software TLB invalid.
  TM_CAUSE_FAC_UNAV      FP/VEC/VSX unavailable trap.
- TM_CAUSE_SYSCALL       Syscall from active transaction.
+ TM_CAUSE_SYSCALL       Currently unused; future syscalls that must abort
+                        transactions for consistency will use this.
  TM_CAUSE_SIGNAL        Signal delivered.
  TM_CAUSE_MISC          Currently unused.
  TM_CAUSE_ALIGNMENT     Alignment fault.